Predelava Plastike nakup rabljenega (3.884)

Stanje: rabljeno, Keba analog module AM 450/A Kemro K2-400 – suitable for Engel CC200 control - Removed from a running machine - Fully functional Manufacturer: Keba Type: AM 450/A Kemro K2-400 Manufacturer no.: 054202 Hsdpew Ah N Sjfx Adrjfh

Stanje: rabljeno, B&R 2010 DO430 Digital Output - Housing replaced - Compatible with all B&R 2010 controllers - Removed from operating machine - Taken from Ferromatik MV 200-970 - Fully functional Manufacturer: Ferromatik Milacron Model: B&R 2010 Spare part no.: 10010690 Hfodpfx Adow Ah Nxorjh Manufacturer no.: 2DO430.6

Stanje: rabljeno, Keba input card DI 470/A Kemro K2-400 – suitable for Engel CC200 control unit - Removed from an operational machine Hsdsw Ah N Ejpfx Adrefh - Fully functional Manufacturer: Keba Type: DI 470/A Kemro K2-400 Manufacturer no.: 054943

Stanje: rabljeno, B&R Provit Controller 5C5001 – removed from Ferromatik MV 200-970 Hjdpfxjw Ah Nre Adrjfh - Removed from an operational machine - Fully functional Manufacturer: B&R Manufacturer no.: 5C5001.11 Spare part no.: 10131261 If the spare part is supplied on an exchange basis, a partial credit will be issued after receipt and inspection of the defective part by the manufacturer. We reserve the right to refuse credit depending on the condition or age of the returned part. The defective part must be in a repairable condition; credit will be issued upon confirmation from the manufacturer.

Stanje: rabljeno, Keba Input Card DI 470/A Kemro K2-400 – suitable for Engel CC200 control system - Removed from a running machine - Fully functional Manufacturer: Keba Type: DI 470/A Kemro K2-400 Hedpsw Ah Nlsfx Adrsfh Manufacturer no.: 054943

Stanje: rabljeno, Keba temperature card TM 450/A Kemro K2-400 – suitable for Engel CC200 control unit - removed from an operational machine - fully functional Manufacturer: Keba Type: TM 450/A Kemro K2-400 Hfedpfxjw Ah Nfo Adreh Manufacturer number: 054492

Stanje: rabljeno, BOSCH Proportional Valve NG16, NG6 – removed from K-Tec 350 3F - Taken from an operational machine - Fully functional Manufacturer: BOSCH Hsdpfxot Sbfvs Adrsfh Type: NG16, NG6 Manufacturer No.: Spare part no.: 1 Model code: 4WRLE 16 X200M-3X/G24K0/A1WG02M-776 Note: The digit before the first slash indicates the device series. Therefore, this digit in the model code may differ from that on your old spare part. If you have any questions, feel free to contact us. Condition: used

Stanje: rabljeno, SANYO SANMOTION servo drive for Y-axis – with firmware for the Y-axis - Removed from Wittmann W721 Hsdjt Sbfispfx Adrefh - Refurbished 3-month warranty: This is provided exclusively following inspection by the manufacturer. Processing is carried out by Complast GmbH. Manufacturer: SANYO Type: QS1A03AA Condition: refurbished

Stanje: rabljeno, Sigmatek DEZ 181 / DIAS VDMA Interface – compatible with NC4 control system Hederr Efkepfx Adrjfh - removed from a Demag ET 6 system - taken from a running machine - fully functional Manufacturer: Sigmatek Model: DEZ181 Spare part no.: Manufacturer no.: D Condition: used

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, leto zadnje generalne obnove: 2025, Demag Systec 210-840 (2015) SERVO Manufacturer: Sumitomo SHI DEMAG Machine type: Systec 210/580-840 Clamping force [kN]: 2100 Shot volume [cm³]: 358 Hjdpjzbg Ezjfx Adrefh Distance between horizontal tie bars [mm]: 580 Distance between vertical tie bars [mm]: 580 Min. mould height [mm]: 340 Max. mould height [mm]: 690 Max. opening stroke [mm]: 575 Max. daylight [mm]: 1365 Year of manufacture: 2015 Machine dimensions L/W/H [mm]: 6022 / 1556 / 2090 Control and software version: NC3 Maximum mould weight [kg]: 3300 Screw diameter [mm]: 45 Screw version: 3-zone Screw L/D ratio: 20:1 Screw non-return valve: Yes Ejector system type: Hydraulic Installed heating capacity [kW]: 39 Number of integrated hot runner circuits: 12 Number of electric temperature controllers: 28 Number of cascade controllers: 2 Connection to central drying system: Yes Discharge system available: Yes Number of temperature control units: 3 Max. temperature of temperature control units [°C]: 160 Machine oil capacity [l]: 400 Hydraulic pump motor rated power [kW]: 26

Stanje: rabljeno, Leto izdelave: 2006, skupna masa: 92 kg, volumen zalogovnika: 6 l, The Motan material separator can only be used in conjunction with a side channel blower. The side channel blower is not included in the offer. Payment terms: 100% in advance, net Manufacturer: Motan Model: HLB 06-1-A010-0 Condition: used Hfjdpjit Ru Aofx Adreh CONVEYING UNIT: Separator Conveying capacity: - Hopper volume: 6 l Connection diameter: 40 mm (material line) Total connected load: - Other equipment: Voltage: 24 V Operating manual: German GENERAL DATA: - Total weight: 9.2 kg Overall dimensions (L x W x H): 28 x 23 x 63 cm

Stanje: rabljeno, ruhlamat QS-3 diverter/BG1 / 888 213 65 / 2 outlet diverter - Removed from Demag ET6EL EXIS S - Taken from a running machine - Fully functional - Year of manufacture: 2000 Manufacturer: ruhlamat Model: BG1 Serial no.: 2 Spare part no.: 888 213 65 Hodoh Szl Ispfx Adrsfh Condition: used

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, vpenjalna sila: 6.500 kN, Oprema: dokumentacija / priročnik, ENGEL DUO 2050 / 600* (2016) 🔧 *M006 CLAMPING UNIT • Clamping force: 600 t • Embossing: NO • Max. mold weight: 9500 kg • Max. mold weight per platen: 6300 kg • Mounting area (W x H): 1030 x 910 mm • Min. mold height: 400 mm • Max. mold height: 950 mm • Max. daylight (open): 1750 mm • Centering ring FIX / MOVE: 160 / 160 mm • Quick mold clamping system: YES Hedpfezbdcwjx Adrofh → Dimensions: 560 x 560 mm → Cylinder diameter: 70 mm MOLD INTERFACE • Heating zones: 32 (16-pin TC, 16-pin PW) • Water cooling circuits: 6+6 • Hydraulic circuits (cores): 2+2 • Hydraulic hot runner valve gates (nozzles): 6 • Pneumatic hot runner valve gates: 8 INJECTION UNIT • Screw diameter: 60 mm • Nozzle face + thread: R20 + UNF 7/8" • Injection unit type: 2050 • Screw stroke: 300 mm • Max. injection volume: 848.23 cm³ • Max. injection pressure: 2400 bar • Max. injection rate: 705 cm³/s • Accumulator SW / HW: YES / YES ELECTRICS / ROBOT • Mold ejector: YES • Sockets 400 V/16 A: 3 • Sockets 400 V/32 A: 7 • Sockets 400 V/63 A: 1 • Robot type: Linear • Vacuum ports: 4 • Air pressure ports: 6 • User inputs/outputs: 18 / 16

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, vpenjalna sila: 6.500 kN, Oprema: dokumentacija / priročnik, Vpenjalna sila: 700 t Premer vijaka: 60 mm Razdalja med opornimi stebri (V): 960 mm Razdalja med opornimi stebri (H): 1100 mm Volumen brizga: 705 cm³ Tip: Horizontalen Hfsdpfx Adozbdb Horsh Pogon: Hidravlični Hidravlični jedrni izvleki: 2 + 2 + 6-osni robotski prijemalni krak

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Vpenjalna sila: 700 t Premer vijaka: 60 mm Razdalja med opornimi stebri V: 960 mm Razdalja med opornimi palicami H: 1100 mm Prostornina brizga: 710 cm³ Hedpszbdbtefx Adrefh Tip: Horizontalen Pogon: Hidravlični

Leto izdelave: 2011, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, ENO VIJAČNI EKSTRUDER Z AC MOTORJEM + INVERTERJEM, ELEKTRIČNA OMARA Z 8 OBMOČJI OGREVANJA Hjdpszcav Aefx Adrefh

Leto izdelave: 1999, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Popolna linija Bausano 146 z dvojnim vijakom za granulacijo PVC-ja. Hfjdjzcarqopfx Adrjh

Leto izdelave: 2001, stanje: dober (rabljeno), Prodaja se industrijski dvopolžni ekstruder Werner & Pfleiderer ZSK 133, danes znan pod blagovno znamko Coperion. Stroj je namenjen za obdelavo in kompaundiranje plastičnih mas, zlasti PP granulata, poliolefinov, masterbatch-a, polnjenih in modificiranih materialov. Ekstruder je letnik 2001, kupljen rabljen leta 2015 v delujočem stanju, vendar po nakupu ni bil uporabljen v naši proizvodnji. Od takrat stoji in je naprodaj zaradi neuporabe. Osnovni podatki: kapaciteta do 4 t/h, glavni elektromotor 1100 kW, napetost 690 V, frekvenca 50 Hz, število obratov motorja 1492 rpm, hitrost polžev do 400 rpm, maksimalni tlak 200 bar, moč ogrevanja 137 kW, 6 ogrevalnih con, dimenzije 3535 × 900 × 500 mm. Hfodszc I Igspfx Adrjh Komponente ekstruderja vključujejo melt črpalko, podvodni granulator s ploščo in kompletom nožev, hladilni sistem za vodno kopel, oljno enoto z elektro grelci za segrevanje plošče za granuliranje in hidravlične enote za pogon in zaklepanje škarij. Primerno za tovarne, ki se ukvarjajo s kompaundiranjem, proizvodnjo PP granulata, masterbatch-a, regranulacijo in predelavo plastike z visoko kapaciteto.

Leto izdelave: 2010, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Glava na vozičku v dokaj dobrem stanju z različnimi moškimi in ženskimi nastavki. Hjdpjzb U Rljfx Adrofh

Stanje: rabljeno, Leto izdelave: 2001, obratovalne ure: 38.850 h, vpenjalna sila: 25 kN, delovna prostornina: 20 cm³, tlak vbrizgavanja: 1.810 letvica, skupna masa: 1.900 kg, premer polžastega transporterja: 18 mm, Dobavni pogoji: iz lokacije Dobavni rok: po dogovoru Plačilni pogoji: 100% pred prevzemom stroja, neto Hfodpfjyt R S Asx Adrjh

Stanje: rabljeno, Leto izdelave: 2008, Premer polža 18 mm Zapiralna sila 250 kN Maks. odprtina 350 mm Višina vgradnje orodja 200 mm Krmiljenje Selogica Obratovalne ure 52.492 h Teža 2030 kg ARBURG ALLROUNDER 270 S 250-70 – brizgalni stroj – leto izdelave 2008 – ODLIČNO stanje Vmesnik za robotski sistem po EUROMAP 67 je na voljo Naprodaj je zanesljiv in preizkušen brizgalni stroj ARBURG ALLROUNDER 270 S 250-70 iz leta 2008. Stroj je idealen za natančne plastične dele v malih in srednjih serijah ter prepriča s svojo robustno konstrukcijo in znano kakovostjo ARBURG „Made in Germany“. Tehnični poudarki: - Zapiralna sila: 250 kN - Brizgalna enota: velikost 70 - Premer polža: cca 18–25 mm - Tlak brizganja: do cca 2.500 bar - Razdalja med stebri: cca 270 x 270 mm - Montažne plošče: cca 380 x 380 mm - Priključna moč: 53 kW Električna oprema: - Obratovalna napetost: 400 V / 50 Hz - Napetost krmiljenja: 230 V / 24 V - Skupni tok: 89 A Dodatne informacije: - Leto izdelave: 2008 Hodpfoywzv Ijx Adrofh - Proizvajalec: ARBURG (Nemčija) - Stroj je robusten, vzdržljiv in enostaven za vzdrževanje - Idealen za tehnične plastične dele in precizne aplikacije Prednosti: - Preizkušeno SELOGICA-krmiljenje (značilno za to serijo) - Kompaktna zasnova - Visoka procesna varnost - Dolgoročna dobava rezervnih delov zagotovljena Ogled možen po dogovoru. Dodatne informacije, slike ali videoposnetke lahko pošljemo na zahtevo. - Obratovalne ure: 52.492 h, 7.085.048 ciklov - Sprejemi za centrirne obroče ø125 mm - Na voljo puhalna enota

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 102.000 h, vpenjalna sila: 6.500 kN, DUO 5550/650 Advanced Year 2007 Clamping force: 6500kn Screw D90 screw S6, tempered, flight armouring and ionitrided, abrasion resistant Controll unit CC200 A01 Slovenian: SL German: DE Workin hours: 102.000 1x core mowing platen 1x corepull additional on movable platen Mold height increase of 200 mm Variant C according to technical sales manual (Min. mold height remains standard, max. mold height increases, platen stroke remains standard, max. platen distance remains standard) Connections for external filter station 8x mould heating controll Expansion module for 8 temperature measuring or control points Standard 8-way cooling water flow regulator (0-10 l/min) Cooling water flow regulator, 10-way Magnetic mold clamping platen-system TECNOMAGNETE temperature resistant up to 120 degrees C incl. interface Euromap 70.1, nozzle adaptation and assembly ENGEL ROBOTER TYPE ERC 63-F X-Max. travel distance: 100 mm Total Y-axis length: 900 + 900 mm (tandem) Z-total 2360 mm C-axis (125 Nm) 2 switchable vacuum/compressed air circuits Hfjdpfsy Ug Ahsx Adrsh RC 200 integrated with C30 E handheld control unit

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 700 kN, Oprema: dokumentacija / priročnik, Seologica krmiljenje Vpenjalna sila: 70 t Premer vijaka: 40 mm (visoko trdna izvedba) Razdalja med stebri V: 370 mm Razdalja med stebri H: 370 mm Razmik med stebri: 370x370 mm Platišča HxV: 510x510 mm Debelina orodja min-maks: 200 Hod: 400 mm Prostornina brizgalnega polnjenja: 188 cm3 Tip: Uni Pogon: hidravlični Zračni ventil: 1 Delovne ure: 23.000 2 servo črpalki 4 prosti hladilni krogi Hfodoygtquepfx Adreh 6 električnih grelnih con za orodje

Stanje: dober (rabljeno), Leto izdelave: 2009, ENGEL Emotion 440/100T Zapiralna sila: 1000 kN Odpiralni hod: 400 mm Izmetni hod: 130 mm Izmetna sila: 37 kN Premer polža: 40 mm Maks. hod prostornine: 220 cm³ Maks. hitrost vrtenja polža: 420 obr/min Vbrizgalna zmogljivost: 224 cm³/s Hsdpfsyktp Sex Adrefh Specifični vbrizgalni tlak: 2200 bar Hod šobe: 305 mm Pritisk šobe: 40 kN

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Modern and fully operational Krauss Maffei precisionMolding 160-750 injection moulding machine, year of manufacture 2022. This machine ranks among the top models for industrial plastic injection moulding and is designed for precise, reliable, and efficient series production. Thanks to its advanced design, high performance, and precise control system, it is ideal for manufacturing demanding plastic components for automotive, electronics, consumer goods, and industrial applications. Technical data • Manufacturer: Krauss Maffei, Germany Hedpfsza A H Ejx Adrefh • Model: precisionMolding 160-750 • Year: 2022 • Power supply: 400 V / 50 Hz / 3P + N + PE • Rated heating capacity: 4.8 kW • Motor output: 25.2 kW • Total connected load: 55.0 kW • Full load current: 143.3 A • Fuse protection: 50 A • SCCR: 25 kA Machine features and benefits • Precision and reliability: enables production of highly precise parts with consistent quality • Energy efficiency: Optimised power and heating management reduces energy consumption • Modern control system: intuitive operation and precise setting of injection parameters • Production flexibility: suitable for various types of plastic parts, from small precision components to larger assemblies • Option to purchase injection moulds: allows immediate expansion of production capacity • Support during the production process: On serious enquiry, we can provide contacts of buyers for the manufactured parts Machine applications This machine is suitable for a wide range of industrial uses: • Automotive – precision body parts, covers, technical components • Electronics – device covers, switches, connectors • Consumer goods – parts for household appliances, toys, packaging • Industrial components – technical parts requiring high precision and reliability Condition and availability The machine is fully operational, maintained regularly, and ready for immediate production use. Personal inspection can be arranged upon request.