Menci Samovozni Polpriklopnik nakup rabljenega (4.377)

Stanje: rabljeno, največja dovoljena obremenitev: 16.000 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2021, prostornina tovornega prostora: 55 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, Ceytech 3-osni jekleni prekucnik z dvigljivo osjo Podpfoy A Aqqsx Apmogl * 3-osna prekucna polprikolica * Proizvajalec: Ceytech * Tip vozila: DA prekucnik * Prva registracija: 20.01.2021 * Dovoljena skupna masa: 24.000 kg * Obremenitev osi: 3 x 8.000 kg * Jeklena korita * Približno 55 m³ prostornine * Zadnja nihajna stena * Ročno zvijanje ponjave / pokrov * Zračno vzmetenje * Kolutne zavore * Pneumatike: 385/65 R22.5 * SAF osi * Mehanske podporne noge * Bočna zaščita proti podvleki * Lestev / dostop * Standardni priključki na voljo * Vozilo pripravljeno na uporabo Za dodatna vprašanja smo vam vedno na voljo.

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.500 mm, prostornina tovornega prostora: 87 m³, Chassis Manufactured as a self-supporting ALUMINIUM structure with appropriate reinforcements in the lower chord for particularly high stability and strength. Aggregated chassis made of ALUMINIUM, frame height 140 mm (max. 39 t), axles and suspension: disc brakes 22.5", Jost axle units 3 x 9 ton with DC air suspension, lifting and lowering function. Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor equipment). 1st and 3rd axles separately liftable with starting aid (without tractor equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Pedpfx Apey U Syrsmogl Tyres and wheels 6 wheels with 385/65 R 22.5 tyres, manufacturer’s choice, on Alcoa aluminium rims, satin finish, 11.75x22.5 ET 120 (with steel equivalent approx. 120 kg). Landing legs Aluminium drop-leg supports, manufacturer: Alu-Leg, 2 x 10 t support load, with swivelling feet for air suspension. Brake system According to E.E.C. standards, dual-circuit braking system, Wabco EBS E system with RSS (Roll Stability Support), spring-loaded parking brake acting on two axles with control at the rear, aluminium air tank system, premium modulator. Electrical system According to StVZO regulations with 2 Aspöck Europoint III five-chamber rear lights integrated into the ALU rear profile, 24 V system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 work lights at the rear, 2 LED work lights on the sides at the height of the landing legs, 1 LED work light inside front left, operable from the outside. Body/tipper body – "Body fully welded inside" Front wall load: 17,250 dkn. Rear and side walls: 10,250/13,400 dkn. Aluminium tipper body, side walls made from 30 mm thick ALU plank profiles (2–3 mm) 600 mm wide, fully welded to lower and upper chords, inside fully welded plank profiles! Floor built as moving floor system on 140 mm ALU cross members, forklift load approx. 7 t/m², closely spaced cross members (approx. 350 mm), ALU front wall with 600 mm plank profile 2–3 mm thick, straight design, special ALU corner profiles, bevelled design. Smooth tailgate in straight design with 2 ALU swing doors, 50/30 mm thick with 4 locking rods, welded in ALU rear frame, mounted with Teflon and stainless steel bearings, travelling ALU wall suspended in reinforced ALU top chord with "Kevlar tarp" for complete evacuation, lateral brush seal and additional Kevlar side tarp, integrated discharge funnel with folding cover plate at the rear left, accessible from outside, rear left viewing window, one sample shutter in each rear door (total 2 pieces), service door left in the front wall. Hydraulic system – "Cargo Floor" 24 board system – smooth finish! Moving floor system in the floor with hydraulically operated ALU profiles on ALU box sections with approx. 880 PE-HD skids, approx. 8 mm floor thickness, hydraulic stroke approx. 200 mm, rigid connections at the front wall, separate hydraulic line connection from under the vehicle with fixed halves, pipe size NW 21, fixed halves with specified size and design to be confirmed, operating pressure 190–max. 240 bar, aluminium end pieces welded into the floor, opening rear left with cable control in a lockable watertight box, without hydraulic hoses. Accessories PVC mudguards with rubber mudflaps, ALU spare wheel holder, foldable side ALU underrun protection, 1 tool box approx. 800x460x430 mm plastic, approx. 3.7 m Alu ladder, 680 g/m² tarpaulin with roller system including side quick release.

Stanje: rabljeno, največja dovoljena obremenitev: 35.840 kg, skupna masa: 41.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2024, naslednji pregled (TÜV): 02/2026, skupna širina: 2.550 mm, Oprema: ABS, Our complete inventory of immediately and short-term available vehicles can be found on our website. Excerpt from the equipment. Complete specification available upon request. Chassis: * Configuration for transporting containers: 45', 40'HC, 30', 20' center, 20' rear, 2x20', 40' ISO Pgodpfx Apsw Ak A Usmel * Frame adapted for a 40' ISO container * Rear pneumatic extension with additional mechanical locking pin * Container Master 45' R2 * Extendable bumper * Steel underrun protection Axles and Suspension: * SAF disc brake axles, 3 x 9,000 kg, 22.5" INTRADISC KNORR clamps * Brake disc diameter: 430 mm * Rigid axles * Approx. 1,090 mm coupling height unladen * 1 lift axle Landing Gear: * JOST 2-speed landing legs Tyres/Rims: * BRIDGESTONE 385/55 R22.5 DURAVIS R002 3PMSF (B-B-70) * Rolling resistance: B, Wet grip: B, Rolling noise: 70dB * Without spare wheel * Steel rims 22.5-11.75 ET-120 * Nut protection caps Braking System/Pneumatics: * Steel air tank braking system as per manufacturer’s choice with Basic Modulator featuring RSS/RSP Electrics: * Socket: 1x 15-pin and 2x 7-pin with EBS connection, without connecting cable to tractor unit Lighting: * Partial LED Aspöck-EUROPOINT III * LED license plate lighting * LED marker lights * LED side marker lamps Other Chassis Equipment: * Full-coverage mudguards * Splash protection behind the third axle * Full PVC mudguards * Without spare wheel carrier and spare wheel winch * Key for container lock * Frame adaptation for transport of ISO 40' containers (with flat floor, no tunnel) * 2 adapters and 2 spacer supports * Without toolbox Paintwork: * Chassis KTL coating * Chassis painted in RAL 7021 (black grey)

Stanje: novo, največja dovoljena obremenitev: 36.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment features. Full equipment details available upon request. GOOSENECK: * Gooseneck in SNT design for optimizing loading platform length, approx. 3,700 mm long, rear chamfer approx. 1,000 mm x 6° * For tractor units: 4 x 2 and 6 x 2 * ASPÖCK UNIBOX * On the gooseneck and rear chamfer: grating floor with 5 mm steel reinforcement * 2 inch king pin * Gooseneck guide plate for fifth wheel, approx. 500 mm wide * Round NATO socket on the front connection rail (Maeler & Kaege VG 96 917) * One pair of plug-in ALU side boards on gooseneck, approx. 400 mm high, anodized finish * One LED work light each mounted top left and right on the front wall, operated by on/off switch (control via tractor unit is not possible in this case) LOADING PLATFORM: * Platform length approx. 9,600 mm, with rear chamfer approx. 900 mm x 6° * Platform behind the gooseneck hydraulically liftable/lowerable, length approx. 3,000 mm, load capacity approx. 9,000 kg * Continuous grating floor on both lift bed and platform with approx. 5 mm steel base as additional reinforcement, suitable for point loads TYRES: 235/75 R 17.5 3PMSF twin tyres. Brand at our discretion * TPMS tyre pressure monitoring system in accordance with ECE R 141 AXLES: * BPW axles and suspension, 1st and 2nd axles rigid, 3rd axle steering * 3rd axle with electro-magnetic reverse lock triggered by reverse gear and manual activation * 1st axle with start assist Psdpsy Auhhofx Apmegl * Technical axle load: 12,000 kg per axle * Air suspension with lift and lower valve HYDRAULIC LOADING RAMPS: * One pair of two-piece AXS steel ramps with grating surface, approx. 4,920 mm long and approx. 900 mm wide * Hydraulically folding ramp tips * Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 365 mm inward * Flashing lights on the outer edges of ramp tips, switch next to ramp controls * Ramp safety in road position via quick release * Painted sand coating on ramp frame and ramp tip * Mechanical drop-leg type supports on the sides of the ramps for stability when docking to unloading ramps * Ramp operation valves located on the right side of the vehicle BRAKE SYSTEM: WABCO EBS-E brake system according to EU regulations SURFACE TREATMENT: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection PAINTWORK: * Trailer in carmine red (RAL 3002) * Rims silver gray * Side boards in bare aluminum * Wheel hubs according to axle manufacturer * Lamp panel pure white (RAL 9010) EQUIPMENT: * Removable front wall made of steel, approx. 1,600 mm high, with supply line connection strip to tractor approx. 1,000 mm from bottom edge of outer frame profile * Lashing chain fixing options on the inside left and right of the front wall, including aluminum trays below left and right for storing chains or tensioning straps * Behind the front wall, approx. 12 mm thick DELIGNIT panel, bolted * 2 additional pairs of bolt-on lashing rings (LC 5,000 daN) * Electric cable winch, approx. 5,400 kg pull capacity, with radio remote control. Steel cable approx. 24 m long, cable diameter approx. 9.5 mm, including cable pressure roller

Stanje: rabljeno, največja dovoljena obremenitev: 31.410 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2021, naslednji pregled (TÜV): 08/2026, prostornina tovornega prostora: 92 m³, skupna širina: 2.550 mm, Leto izdelave: 2020, Oprema: ABS, Celoten naš vozni park z vozili, ki so na voljo takoj ali v kratkem času, najdete na naši spletni strani. Izvleček opreme. Celoten seznam opreme je na voljo na zahtevo. Pgjdpow Tpr Uefx Apmel - 3 x SAF osi - Kolutne zavore - 1. os z avtomatskim dvižnim mostom - Zračno vzmetenje - 24 t, dvostopenjska podporna noga, enostransko upravljanje - Izvlečna lestev zadaj - Plastična orodna skrinja s predalom in vmesno polico - Dvocevni pnevmatski zavorni sistem, EBS/ABS - Pnevmatske gume 385/55 R22.5 - Pomikajoča tla Cargo Floor, približno 10 mm talni profil - Zadnja stena iz aluminijastih votlih profilov, dvokrilna vrata - LED delovne luči - Barvanje okvirja v DB 7350 Novagrau - Barvanje kesona v RAL 7035 svetlo sivo - Ponjava v barvi podobni RAL 3002 karmin rdeča

Stanje: novo, največja dovoljena obremenitev: 30.190 kg, skupna masa: 43.000 kg, konfiguracija osi: 2 osi, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available for immediate or short-term delivery, on our website. The following is an excerpt from the specifications. Complete equipment details available upon request. Load area: - Lowbed with external beams, extendable version in SUPER LOW design, length approx. 6,850 mm - Lowbed with fixed hardwood floor, approx. 40 mm thick, with mechanical locking - Supply lines are protected within the extendable beams and automatically adjust to the current lowbed length - 5 pairs of lashing rings, foldable outward (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for mounting bolted RUD rings Podpoxarl Njfx Apmjgl Gooseneck: - Gooseneck in SNT design to optimize load area length, approx. 3,750 mm - Gooseneck hydraulically lift/lowerable and detachable - Technical fifth wheel load: 23,000 kg - For tractor units: 4x2, 6x2 Rear chassis: - Rear chassis in short version with closed outer frame and checker plate cover - Chassis with excavator recess, closed in the rear half to accommodate air tanks - 2 pairs of lashing rings, foldable outward (LC 5,000 daN) - 1 pair of lashing rings, foldable outward (LC 10,000 daN) - 1 pair of lashing rings lying flat, at the front & rear of the chassis (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced-steered - Technical axle load: 12,000 kg per axle - Air suspension with raise/lower valve Tyres: - Tyres 245/70 R 17.5 3PMSF, manufacturer of our choice - Load index (146/146F) - TPMS tyre pressure monitoring system according to ECE R 141 - Data transmission to tractor via standardized EBS interface (ISO 11992) - For proper display, the tractor must be capable of transmitting and displaying these data Braking system: - Braking system according to EU regulations with EBS-E (2S2M) Electrical system: - Electrical system in accordance with EU regulations, 24-volt lighting ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with turn indicator - ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: - Steel construction of high-strength fine-grain steels - Steel qualities: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Entire steel construction automatically shot-blasted after welding - Second blasting with corundum for optimal coating adhesion - Complete vehicle chassis coated with HRM metallization using ZINACOR 850 (85% zinc / 15% aluminium) for premium corrosion protection - Top coat with 2 layers of 2K paint in RAL 3002 carmine red, single-color, according to RAL system 841GL - Rims in silver - Rear section metallized and painted in RAL 9010 (pure white) - No metallic paint possible - Paint system tested in salt spray test according to ISO 9227-NSS - Cavity sealing with special wax Including the following additional equipment: - 2-inch kingpin - One galvanized steel front wall, approx. 400 mm high - Remote-steered axles from front and rear via cable control with pushbuttons, with single-track monitoring (without installation in tractor unit) - Hydraulic connections from gooseneck to lowbed with multi-coupler instead of threaded couplings - Electro-hydraulic power unit - Prepared for installation of bolted container mounts for 1x 20' or 1x 40' container on outer beams - Without container locks

Stanje: rabljeno, največja dovoljena obremenitev: 30.753 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2023, dolžina tovornega prostora: 9.800 mm, širina tovornega prostora: 2.440 mm, višina nakladalnega prostora: 2.100 mm, prostornina tovornega prostora: 50 m³, Oprema: ABS, VEHICLE NUMBER: 2821 ----* Exterior Features: * Rear tailgate laid on with seal * Pneumatic locking * Additional tension locks for rear tailgate * Reinforced rear wall * Grain slider and grain discharge chute with bag * Cross members on the trough floor fully welded * Holder for broom and shovel * Load pressure gauge Podpfx Ajycndzspmjgl * Work platform with access steps * Hydraulic hose holder, park position work platform * Full-load drop-down supports * Aluminum rims * Roll tarp cover * LED work lights * LED rear lights with dynamic indicators * Folding underride guard ----* Technical Details: * ROTOS axles with disc brakes * Lift axle on the 1st axle * Tires 385/65 22.5 * Tread depth in mm: 1st axle: 10/10, 2nd axle: 13/13, 3rd axle: 8/8 * Automatic lowering during tipping process * Tipping cylinder 190-250bar * 1" screw coupling internal thread * Trough floor 5mm * Saddle height 1,150mm * Loading height 3,655mm * Unladen weight 5,847kg * TÜV/general inspection: 08/26 SP: * Leasing example: €519.- monthly rate, term 72 months, 10% down payment (can also be your used vehicle), 10% final payment. * Delivery possible to your location. Trade-in / Leasing / Financing. We make it possible!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33903000211, lastna masa: 7.707 kg, največja dovoljena obremenitev: 27.293 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2023, dolžina tovornega prostora: 15.030 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.655 mm, prostornina tovornega prostora: 101 m³, skupna dolžina: 15.350 mm, skupna širina: 2.550 mm, skupna višina: 4.005 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22,5", Leto izdelave: 2023, The images are archive photos; the vehicle may still be in use! Vehicle consists of: Chassis semi-trailer for freight forwarding Fine-grain steel welded lightweight construction to the support legs, fifth wheel plate with replaceable 2-inch kingpin 24 t 2-speed landing gear, single-side operation, with straight lower part Pull-out ladder at the rear Side door holders 2 wheel chocks with holder Side underrun protection, aluminium Rear underrun protection, steel, with wide Fliegl mud flaps Foldable mudguard for lighting unit Quarter shell mudguards Rear impact protection Tarp rod with bracket 1 plastic toolbox Axles & Suspension 3 BPW disc brake axles "Axle/chassis laser alignment" – reduces tyre wear and fuel consumption Air suspension Brake System 2-line compressed air braking system Pgodpfx Ajy Snmpopmsl Coloured hose runs for easy maintenance Spring-type parking brake Duomatic EBS, electronic braking system with EBS socket at the front, no connecting cable Note: The trailer must only be towed by tractors that guarantee the effectiveness of the ABS! With lift & lower valve Vehicle - Driving Stability System AAC Basic, automatic lift axle on the last axle, acts as shunting aid up to 20 km/h, manually switchable Axle load detection via EBS CAN bus signal Wheels and Tyres 385/55 R22.5 – make at manufacturer’s choice Electrics 24 Volt, multi-chamber lights, side-mounted yellow LED lighting Side yellow LED lighting connected to indicator “flashing side markers” 2 white front position lights 2 white/red lane departure lamps at the rear 2 x 7-pin and 1 x 15-pin misconnection-proof sockets at the front, no connecting cable SB Hydraulics Hydraulic cylinder with sliding mechanism integrated into the floor. 2-circuit hydraulics. Direction change (forward/reverse) is electrically operated by wired remote control. Hydraulic actuation via truck PTO Hydraulic connection with hose at front wall and HDK screw connector Recommended pump capacity: Flow rate: 110 l/min Pressure: 250 bar Min. oil tank capacity: 100 l Floor planking made of aluminium, 8 mm profiled, grooved Aluminium box body from high-quality, wear-resistant material. Front and side walls made from aluminium hollow profiles, all round at the top welded with a wide special reinforcement profile in aluminium Sliding wall for easier unloading, with reinforced tarpaulin at the bottom Rear wall from aluminium hollow profiles, double-winged door divided 1/2 to 1/2, with special U-profile frame with stop and rubber gasket all round, 2 external swing bolt locks, locked top and bottom. Rear wall with mechanical safety lock, operation at the rear on the left in direction of travel, with pivoting crossbar at top. Standing platform with ladders on both sides 3 removable, swivel crossbars for tarp support Sliding sheet, stowable on one side, with 2 longitudinal tensioning straps, 3 ratchet straps at the side Operating Instructions Special permit required if total hitch length exceeds 16,500 mm. Country of Registration / Plates Germany with Dekra inspection and certificate (§13 EC-FGV) Warning sign "Long HGV" Long-HGV combination inspection certificate Driver instruction at Triptis factory for up to 4 persons per truck combination Paintwork Frame: DB 7350 Novagrau tipper body: aluminium natural finish Tarpaulin: RAL 7035 light grey

Stanje: rabljeno, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2007, Leto izdelave: 2007, Oprema: ABS, * Scania R 420 + kiper priklopnik + Palfinger dvigalo * ??Reciklaža stekla?? * Prva registracija: 12-2007 * Polavtomatski menjalnik + sklopka * Retarder * Kiperska hidravlika * Klimatska naprava * LISTNA / ZRAK * Reiling kiper priklopnik + dvigalo * Prva registracija: 12-2007 * Palfinger PK 18000 L * 3x hidravlični izvleki Podeyt Apgspfx Apmegl * 5. in 6. krmilni krog za grabilo * Več slik in videoposnetkov po Whatsappu * Podatki brez garancije, vmesna prodaja pridržana.

Stanje: rabljeno, največja dovoljena obremenitev: 26.400 kg, skupna masa: 34.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/1998, Leto izdelave: 1998, Oprema: ABS, * Hendricks Bitum * Prva registracija: 08-1998 * Prostornina: 28.000 litrov Psdpfeyq Dbrex Apmogl * 3 x prekata * Lastna teža: 7.600 kg * Dodatne slike in videi prek Whatsappa * Podatki brez garancije, vmesna prodaja pridržana.

Stanje: rabljeno, največja dovoljena obremenitev: 33.707 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2025, naslednji pregled (TÜV): 09/2026, dolžina tovornega prostora: 8.912 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 2.285 mm, prostornina tovornega prostora: 50 m³, skupna širina: 2.550 mm, skupna višina: 3.672 mm, Leto izdelave: 2025, Oprema: ABS, STAS 3-axle Hardox steel tipper 50 cbm "EXTREME" rock tipper First registration 09/2025, condition NEW Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (tapered body design in width) Unladen weight: 8,293 kg Z-chassis, cranked version Continuous floor panel in 6 mm Hardox steel HB450 4 crusher angles evenly distributed along the entire length of the floor, fully welded Front and side walls made of 5 mm Hardox steel HB450 Inclined front wall, with internal access Deflector plates running the full length of the sidewall (to protect mudguards) Hydraulic tailgate (with swinging function) HYVA tipping cylinder type Alpha, suitable for high and low pressure ALU landing legs, full load capacity 2x pneumatic vibrators mounted beneath the body SAF axles with large disc brakes, 430 mm 1st axle is a lifting axle with starting aid WABCO trailer EBS with RSS anti-skid protection Pgjdpexriu Esfx Apmol WABCO Smartboard Automatic tipping lowering function Lifting and lowering device Tyres: 385/65 R 22.5 Aluminium access ladder Shovel and broom holders Toolbox on the right 4x LED reversing lights RENTING is the new BUYING – also available immediately from us with FULL SERVICE RENTAL.

Stanje: rabljeno, največja dovoljena obremenitev: 6.582 kg, konfiguracija osi: 3 osi, prva registracija: 02/2025, naslednji pregled (TÜV): 02/2026, dolžina tovornega prostora: 10.575 mm, širina tovornega prostora: 2.440 mm, višina nakladalnega prostora: 3.690 mm, prostornina tovornega prostora: 59 m³, Leto izdelave: 2025, * Alu zabočna korita 10.5 * Aluminijasta kombinirana vrata, funkcija vrat in nihala, z nihajnim okvirjem in lokom * 2 žitna izpusta s pokrovom * 1. in 3. os dvižni * LED vzvratni žarometi * 6x 385/65R22.5 * PVC navojna ponjava * Podvozje VATRO CINKANO Pgodpevyw Tvofx Apmel * Platišča lakirana v srebrno RAL 9006 Na željo je mogoče prikolico tudi najeti Spremembe in vmesna prodaja pridržane

Stanje: rabljeno, največja dovoljena obremenitev: 32.520 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2015, naslednji pregled (TÜV): 07/2026, dolžina tovornega prostora: 13.634 mm, širina tovornega prostora: 2.483 mm, višina nakladalnega prostora: 2.941 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, Jekleni platišča, zračne zavore, kolutne zavore, drsne ponjave, drsna streha, krilna vrata, dvižna os, SAF osi, lesena tla, rabljeno vozilo Št. vozila 3362. ABS, EBS, 1. os je dvižna os, SAF osi s kolutnimi zavorami, drsna ponjava levo + desno, drsna streha, podporne noge, portalna vrata z dvojnim zaklepanjem, lesena tovorna tla, pritrdilni obroči levo + desno, dimenzije tovornega prostora D x Š x V: 13.634 x 2.483 x 2.941 mm, certifikat za zavarovanje tovora EN 12642-XL, pnevmatike: 435/50 R19,5, lastna teža: 6.480 kg, skupna masa: 35.000 / 39.000 kg, iz prve roke. Prosimo, navedite številko vozila pri povpraševanju. Pridržujemo si pravico do napak in vmesne prodaje. Psdpfx Apoy N H Sromegl

Stanje: rabljeno, največja dovoljena obremenitev: 31.820 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2018, prostornina tovornega prostora: 70 m³, Oprema: ABS, Benalu large-volume tipper 70 m³ 3 axles, standing platform, air suspension, BPW axles, disc brakes, aluminium rims, grain chute, ABS. Payload: 31,820 kg Unladen weight: 7,180 kg Podpfx Ajv I Ikujpmjgl

Stanje: rabljeno, največja dovoljena obremenitev: 32.950 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2020, naslednji pregled (TÜV): 06/2026, dolžina tovornega prostora: 9.500 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 2.100 mm, prostornina tovornega prostora: 48 m³, skupna širina: 2.550 mm, skupna višina: 3.600 mm, Leto izdelave: 2020, Oprema: ABS, In accordance with our "General and stated terms and conditions," without any guarantee or warranty, we can offer you today, subject to prior sale and errors, the following vehicle: Reisch Approx. 48 cbm grain tipper with sidewall damage (Wagon 678) First registration: 11.06.2020 Type: R24-RHKS-3-AG09 Pgedpoy U Swkjfx Apmsl Perm. gross vehicle weight: 39,000 kg Unladen weight: 6,050 kg Payload: 32,950 kg External dimensions approx. L: 10,800 mm, W: 2,550 mm, H: 3,600 mm Internal length approx. 9,500 mm Internal width approx. 2,450 mm Internal height approx. 2,100 mm Floor thickness: 5 mm TÜV: 06/2026, SP: 12/2026 Cranked chassis neck Swing tailgate with all-round rubber seal Grain chute Additional manual tension locks on external tailgate Roller tarpaulin, platform, grain chute Foldable underrun protection 2 x 12 t two-speed support winches Air suspension with lift & lower function Mounting ladder, placed on the rear mudguards Collision damage, sidewall passenger side BPW drum brakes 1st axle lift Tyres: 385/65R22.5 1.) approx. 80/40%, 2.) approx. 80/80%, 3.) approx. 20/60% Axle spacing: 1,310/1,310 mm SAF 9,000 kg axles Tow eye, rear passenger side Axle pressure gauge Plastic toolbox, mid driver's side Chock Aluminium body approx. 49 cbm Roller tarpaulin, platform Swing tailgate with grain slide Clean floor and walls Shovel and broom holder Tow eye at rear Foldable underrun protection 2 x reversing lights COC document Multiple units available Price: €20,000.00 (net) All information supplied without guarantee or warranty. Our "General and stated terms and conditions" apply. Place of jurisdiction for both parties up to a disputed value of €10,000 is the District Court of Ludwigslust; for amounts in dispute exceeding this, the Regional Court of Schwerin. Subject to errors, misprints, and prior sale.

Stanje: rabljeno, največja dovoljena obremenitev: 32.540 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2023, naslednji pregled (TÜV): 06/2026, prostornina tovornega prostora: 50 m³, skupna širina: 2.550 mm, skupna višina: 3.710 mm, Leto izdelave: 2023, Oprema: ABS, According to our "General Terms and Conditions of Business" and subject to change without notice, without any guarantee or warranty, we can offer you the following vehicle as of today, subject to prior sale, errors, and typographical mistakes: Wielton Approx. 50 cbm Grain Tipper Trailer ( Vehicle 655 ) First registration: 27.06.2023 Permissible gross weight: 39,000 kg Unladen weight: 6,460 kg Payload: 32,540 kg Pgodpfx Aey U Swdepmsl Overall length: 11,090 mm Overall width: 2,550 mm Overall height: 3,710 mm Loading volume: approx. 50 cbm MOT (TÜV) valid until: 06/2026, Inspection (SP) until: 12/2026 Rolling tarpaulin, Platform Pendulum tailgate with grain chute 2 x Drop-down supports Air suspension with lift & lower function Axle load gauge 1st axle lift axle BPW disc brakes Tyres: 385/65R22.5 1st axle: approx. 40/40%, 2nd axle: approx. 70/50%, 3rd axle: approx. 80/80% Half-shell mudguards Access ladder above the wheel arch, passenger side Dust sack GMP certified 2 x LED reversing lights Foldable underrun protection Pendulum tailgate with crown chute and rubber sealing Price: €27,500.00 (net) All details are provided without any guarantee or warranty. Our "General Terms and Conditions of Business" apply. Place of jurisdiction for both parties up to a dispute amount of €10,000 is the District Court of Ludwigslust; for dispute amounts exceeding this, the Regional Court of Schwerin shall have jurisdiction. Subject to error, typographical mistakes, and prior sale.

Stanje: rabljeno, lastna masa: 5.180 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2018, dolžina tovornega prostora: 7.500 mm, širina tovornega prostora: 2.440 mm, višina nakladalnega prostora: 1.350 mm, prostornina tovornega prostora: 24 m³, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, barva: bela, Leto izdelave: 2018, prevoženi kilometri: 430.158 km, Oprema: ABS, Lastna teža: 5180 kg, dovoljena skupna teža: 36000 kg, tovorni prostor (D Š V): 7.500 mm x 2.440 mm x 1.350 mm, velikost pnevmatik: 385/65 R22.5, volumen tovornega prostora: 24 m³, 1. os: , 2. os: , 3. os: , zračno vzmetenje, zložljiva zaščita proti podvozu, dvižna prednja os, elektronski zavorni sistem EBS, nihajna zadnja stranica (ležeča), strešna rolo ponjava, podest, hubodometer, priključni vtiči 1x15 in 2x7 polni, antispray sistem, lahka aluminijasta platišča. Celotno ponudbo vozil najdete na naši spletni strani. Želite financiranje? Z našimi dodatnimi storitvami vam ponujamo individualne možnosti financiranja, celovit servis in telematiko. Z veseljem vam svetujemo. Psdoy U Sb Njpfx Apmogl

Stanje: rabljeno, največja dovoljena obremenitev: 36.540 kg, skupna masa: 48.500 kg, konfiguracija osi: 3 osi, prva registracija: 06/2020, naslednji pregled (TÜV): 05/2028, Leto izdelave: 2020, Oprema: ABS, Internal vehicle no.: G400133 Currently en route to our yard in Kaufungen - Kassel, Germany, immediately available More INFO from Luis Lucena Low Loader LANGENDORF SATÜ 30 – 10.0 m with wheel recesses Year of manufacture: 2020 Radio remote control 3 axles – 2 steered – 1 lift axle Length: 13,900 mm Loading platform: 10,000 mm Technically permissible total weight: 48,500 kg Unladen weight: 11,960 kg Financing example: * Internal No.: G400133 * Purchase price: €65,900.00 * Down payment: 10% * Term: 60 months * Monthly installment: €1,025.02 * Residual value: €11,380.00 If you are interested in this offer or would like to tailor it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors excepted. We are happy to accept your used vehicle in part exchange. Financing directly available from us. GOLEC COMMERCIAL VEHICLES GMBH Languages spoken: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian. ---- Pgsdpfx Aey A Uxaspmsl

Stanje: novo, skupna masa: 31.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.500 mm, skupna višina: 7.100 mm, Leto izdelave: 2026, Oprema: ABS, Technical Information: Weights - Permissible gross weight: 31,000 kg - Permissible axle load: 20,000 kg (technical 20,000 kg) - Fifth-wheel load: 11,000 kg - Unladen weight approx.: 6,800 kg (+/- 5% as per DIN 70020, depending on equipment) Dimensions - Saddle height approx.: 1,150 mm - Overall width approx.: 2,500 mm - Overall length approx.: 7,100 mm - Roller height (chassis) approx.: 1,500 mm - Our vehicles are engineered and manufactured to meet the highest standards for transport, waste/disposal/landfill, and agricultural sectors. - Our many years of experience guarantee you a rugged vehicle with an extended service life. Steel Frame - Welded steel frame construction with longitudinal and cross members made from high-grade steels, including mounting supports for hooklift installation - 2” king pin, bolted and replaceable, 2 positions Axles/Suspension - Low-maintenance SAF axles, 2 x 10,000 kg, disc brakes - Including air suspension with raise/lower function - Axle spacing: 1,820 mm Lift Axle - Axle A as lift axle with two-sided lifting Brake System - Load-dependent two-line compressed air brake system according to EU Directive 71/320 (WABCO), automatic load-sensitive brake force regulator - EBS electronic braking system - Smart Board - Spring-loaded parking brake - Automatic lowering when hydraulic system is engaged - Supply via Duomatic coupling Tyres - 4 x 425/65 R 22.5 tyres mounted on 10-hole steel rims, ET 120 Landing Legs - 10 t gearbox-operated landing legs with single-side operation, variable speeds Pedpfx Apowxi Ihsmegl Body - Telescopic hooklift system - Hook height: 1,570 mm - Roller height approx.: 1,500 mm - Container external length: approx. 5,000 mm – 7,000 mm - Lifting/tipping capacity: 25,000 kg - Tipping angle: 50 degrees - Specifications and dimensions as per DIN 30722 - Working pressure: max. 350 bar

Stanje: rabljeno, lastna masa: 5.260 kg, največja dovoljena obremenitev: 30.740 kg, prva registracija: 06/2023, naslednji pregled (TÜV): 03/2025, skupna dolžina: 8.700 mm, skupna širina: 25.500 mm, skupna višina: 25.000 mm, vzmetenje: zrak, velikost pnevmatike: 385 / 65 R 22.5 / 11mm, medosna razdalja: 3.000 mm, velikost sprednje pnevmatike: 385 / 65 R 22.5 / 11mm, obratovalna teža: 36.000 kg,

Stanje: rabljeno, lastna masa: 6.000 kg, največja dovoljena obremenitev: 27.000 kg, prva registracija: 07/2007, skupna dolžina: 7.799 mm, skupna širina: 25.500 mm, skupna višina: 30.000 mm, vzmetenje: zrak, velikost pnevmatike: 385 / 65 R 22.5 / 11mm, medosna razdalja: 1.300 mm, velikost sprednje pnevmatike: 385 / 65 R 22.5 / 11mm, obratovalna teža: 33.000 kg,

Stanje: rabljeno, lastna masa: 6.000 kg, največja dovoljena obremenitev: 27.000 kg, prva registracija: 03/2005, skupna dolžina: 8.700 mm, skupna širina: 25.500 mm, skupna višina: 30.000 mm, vzmetenje: zrak, velikost pnevmatike: 385 / 65 R 22.5 / 13mm, medosna razdalja: 1.300 mm, velikost sprednje pnevmatike: 385 / 65 R 22.5 / 13mm, obratovalna teža: 33.000 kg,

Stanje: rabljeno, lastna masa: 6.000 kg, največja dovoljena obremenitev: 27.000 kg, prva registracija: 05/2005, skupna dolžina: 8.000 mm, skupna širina: 25.500 mm, skupna višina: 30.000 mm, vzmetenje: zrak, velikost pnevmatike: 385 / 65 R 22,5 / 12mm, medosna razdalja: 1.300 mm, velikost sprednje pnevmatike: 385 / 65 R 22,5 / 12mm, obratovalna teža: 33.000 kg,

Stanje: rabljeno, lastna masa: 6.750 kg, največja dovoljena obremenitev: 24.750 kg, prva registracija: 04/2011, naslednji pregled (TÜV): 10/2025, skupna širina: 25.500 mm, vzmetenje: zrak, velikost pnevmatike: 425 / 65 R 22.5 / 6mm, velikost sprednje pnevmatike: 425 / 65 R 22.5 / 6mm, obratovalna teža: 31.500 kg,

Stanje: rabljeno, lastna masa: 5.500 kg, največja dovoljena obremenitev: 26.500 kg, prva registracija: 05/2014, naslednji pregled (TÜV): 01/2024, skupna širina: 25.500 mm, vzmetenje: zrak, velikost pnevmatike: 385 / 65 R 22.5 / 5mm, velikost sprednje pnevmatike: 385 / 65 R 22.5 / 5mm, obratovalna teža: 32.000 kg,