Litech Lump Breaker nakup rabljenega (636)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, vrsta goriva: dizel, barva: rumena, obratovalna teža: 2.927 kg, Leto izdelave: 2026, obratovalne ure: 300 h, Oprema: dodatne luči, gumene gosenice, kabina, klimatska naprava, JCB 8029 CTS Letnik 2021, 300 delovnih ur, delovna masa 2927 kg. Kompaktni mini bager z zaprto kabino, klimatsko napravo in gretjem, upravljanje z joystickom, gumijaste gosenice. Sprednja nivelirna rezila, hitra menjava, dodatne hidravlične cevi za udarni kladivo, 1 nagibna planirna žlica s hidravličnim cilindrom, 2 izkopni žlici. Motor PERKINS z močjo 24 KM. MASON TRUCKS Lodpfxeyy U Sbe Aamsrp Via Vicenza, 31 Vedelago (Treviso)

Stanje: rabljeno, prevoženi kilometri: 60.784 km, moč: 100 kW (135,96 KM), vrsta goriva: dizel, vrsta prenosa: mehanski, prva registracija: 12/2002, emisijski razred: Euro 3, barva: bela, zavore: retarder, število sedežev: 11, Leto izdelave: 2002, Oprema: ABS, parkirni grelec, Attractive MB Vario 814D from government ownership / state police: +++ Body thoroughly refurbished and partially repainted below +++ Configured as a bus (group vehicle) MR / high-roof with auxiliary heater, driver's airbag, ABS, and differential lock on the rear axle, as well as a retarder. This is a wear-free electric eddy current brake used for speed control. The bodywork was professionally repaired in our own workshop and partially repainted at the rear to half height. Vehicles are dismantled beforehand and, for example, all body seams are sealed permanently elastic after painting. The frame/chassis on this Vario was also partially derusted, painted, and permanently preserved with wax as a final step. Additionally, this Vario received a fresh service from us, including engine oil and brake fluid change, renewal of all four batteries, and a new air dryer for the brake system. Furthermore, the plastic glazing in the driver’s cab was replaced with real glass. Due to the good insulation properties, the plastic glazing was retained in the rear section of the vehicle. An ideal base for a spacious motorhome—the technical conversion to a "special vehicle, motorhome" can be completed by us for an additional charge of €600. As part of this, the vehicle will also receive an external 220 V power inlet with RCD circuit breaker and two internal sockets. Further general information about the MB Vario 814D: The auxiliary heater is extremely effective here: It is a circulating hot water heater with convectors in the passenger compartment for draft-free heating. Maximum speed thanks to long axle ratio: Vmax according to documents 120 km/h. Total of 11 seats; the passenger compartment seats are reclining seats with adjustable backrests and armrests. Additionally, the inner left seats can be shifted about 10 cm into the aisle for more freedom of movement. There are three efficient roof hatches in total. Ljdpfsyxuv Dox Aamjrp Interior dimensions from driver’s seat: 4000 x 1850 x 1900 mm (L x W x H) +++ Errors, changes, and intermediate sales reserved.

Stanje: dober (rabljeno), Leto izdelave: 2014, Cutting range 300 mm Cutting capacity at 90 degrees: flat 330 x 260 mm Cutting capacity at 90 degrees: square 260 x 260 mm Cutting capacity at 45 degrees: round 260 mm Cutting capacity at 45 degrees: flat 270 x 200 mm Cutting capacity at 45 degrees: square 250 mm Cutting capacity at 60 degrees: round 180 mm Cutting capacity at 60 degrees: flat 170 x 170 mm Cutting capacity at 60 degrees: square 180 mm Automatic feed 9999.9 mm Minimum feed 2.0 mm Minimum cutting diameter 5.0 mm Band speed 15 - 100 m/min Vice opening 340 mm Saw blade dimensions 3650 x 27 x 0.9 mm Control MEP CNC Total power requirement 2.2 kW Weight 1240 kg Dimensions L-W-H 1800 x 1900 x 1750 mm Current new price approx. EUR 23,000 Ledpfx Aaszkbn Uomorp Special price on request Equipment: - Heavy-duty electro-hydraulic fully automatic band saw (INDUSTRIAL) - With additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 control and 7” touch screen display * Simple and quick adjustment of all machine parameters * With additional soft keys + backlit display * 10 programs, each with a max. of 9999 pieces and max. 9999.9 mm length - Material feed with stepper motor via ball screw * Single stroke 600 mm, repeatable for any length * Accuracy of ± 0.1/600 mm - Feeder with protective cover and safety limit switch - Precise setting of the cutting feed, indicated in mm/min - Positioning of saw head and movement of feeder via joystick - Automatic detection of cut start - Large, adjustable cast steel guide wheels - Saw band tensioning with tension control and display indication - Carbide band guides for highest cutting precision - Automatic monitoring of cutting load - Quick-action vice * With replaceable clamping and stop jaws - Large, side pull-out chip tray and coolant tank * Fitted with 2 electric pumps for band lubrication and cooling * Coolant gun for machine cleaning - Swarf removal brush for cleaning the saw band - Operating manual in German Manufacturer’s information: If this saw is installed in a network with a residual current circuit breaker (RCD), the breaker should be all-current sensitive and rated not less than 300 mA.

Stanje: skoraj kot novo (rabljeno), Type: Farsoon FS HT1001P Build Station, Preheating Station, Cooling Station Ljdpfxjy Hg S Ts Aamjrp Automated job changeover between two build cylinders Scanner from a Chinese manufacturer, deviates from standard series specification Modifications and condition: - Overflow system upgraded with automatic draining - Laser protection glass replaced, approx. 200 operating hours - Infrared emitters replaced, approx. 500 operating hours - Ports for IR cameras present, cameras not included - Curtains installed in the build chamber - Operating hours printer: less than 2000 hours Dimensions: 5585 × 3410 × 2980 mm Weight: approx. 5000 kg Maximum build size: 1000 × 500 × 450 mm Build volume: up to 15 liters per hour Scanner: 2 × high-precision 3-axis galvo systems Scan speed: up to 15.2 m/s Layer thickness: 0.06 to 0.3 mm Laser: 2 × CO₂ lasers, 100 W each Max. chamber temperature: 220 °C Thermal control: multi-zone heating with intelligent temperature management Temperature regulation: continuous real-time monitoring and optimization Operating system: 64-bit Windows 7 File format: STL Software features: manual and automatic control, real-time parameter adjustment, 3D visualization and diagnostics Recommended materials: FS3300PA, FS3250MF, FS3400GF, FS-TPU Voltage: AC 380 V, 3-phase, N/PE Frequency: 50 to 60 Hz Total power: 25 kW Maximum current: 45 A Voltage fluctuation: ± 10 % Fuses: 3 × 50 A Preheating Station - No active preheating present - Used for storage of build cylinders for automated changeover - Roller blinds for protection against crushing and burn hazards Cooling Station - Nitrogen flooding under seal - Surface temperature measurement of the powder cake - Roller blinds as safety feature - Cooling system: Deltatherm - Compressor power: 1.32 kW - Pump power: 0.45 kW - Flow rate: approx. 18 liters per minute - Pump pressure: approx. 5.0 bar - Cooling medium: drinking water - Connections: supply and return 3/4" female thread - Tank volume: approx. 30 liters - Air volume: approx. 2250 cubic meters per hour - One axial fan present - Fan power: 135 W - Dimensions: W 740 mm × D 740 mm × H 500 mm - Weight: approx. 110 kg Unpacking Station (Powder Breakout Station) Dimensions: 1870 mm × 920 mm × 2150 mm Weight: approx. 1200 kg 200-240 Volts Frequency: 50 to 60 Hz Total power: 2 kW Max. current: 10 A Powder Handling Schleiss RPTech - Function: Mixing, sieving, and conveying plastic powders - System forms a complete powder circuit - Components: powder mixing unit with mixer and sieving machine, containers for blended powder, overflow powder, used powder, and fresh powder; pumps for material transfer between containers; humidification module present - Vibratory motor for sieve not included Powder Handling Mixing and Sieving System Technical Data: - Dimensions: 1800 x 815 x up to 2600 mm height - Weight: approx. 240 kg - Temperature range: 0 to 40 °C - Mixing throughput: approx. 10 liters in 8 min - Sieving throughput: 5 kg in 3 min - Voltage: 230 V at 50 Hz with 16 A circuit breaker - Mixer power: 210 W - Extraction power: 2200 W - Air demand: approx. 100 to 140 liters per minute - Operating pressure: 5 to 6 bar Condition: used Scope of delivery: (see picture) (Technical data may be subject to change and errors reserved!) For further questions, please feel free to contact us by phone.

Stanje: dober (rabljeno), Kamnično stikalo, odklopnik, stopničasto stikalo, rotacijsko stikalo, kamnično stikalno orodje, majhen mikro stikalo -Proizvajalec: Schleicher, kamnično stikalo -Tip: PK 15 -Napetost: 220 V 50 Hz Lrodpfezkrv Nsx Aamsp -Dimenzije: 235/110/V110 mm -Teža: 1,1 kg

Stanje: zelo dobro (rabljeno), Scie à panneau à pression PANHANS ECOPAN -occasion- Commande PC avec optimisation, lame inciseur, détection automatique de la longueur de coupe, dispositif de pression latérale, tables à coussin d'air, tables mobiles, avance du chariot de scie en continu, imprimante d'étiquettes ----- Données techniques ----- Longueur de coupe : 4 200 mm, Largeur de coupe : 4 200 mm, Hauteur de coupe max. : 72 mm, Nombre de pinces : 6 pcs., Lsdpeyrqrtofx Aamorp Avance du groupe de sciage max. : 100 m/min., Avance de la butée longitudinale max. : 80 m/min., Puissance moteur scie principale : 11 kW, Puissance moteur inciseur : 1,5 kW, Diamètre lame scie principale : 300 x 30 mm, Diamètre lame inciseur : 180 x 30 mm, Diamètre buse d'aspiration en bas : 140 mm, Diamètre buse d'aspiration sur la poutre de pression : 3x100 mm, Débit d'air : 5 000 m³/h, Raccordement air comprimé : 6 bar, Consommation d'air : 140 l/min., Courant nominal : 38 A, Protection maximale : 50 A Infos qualité : - inspection complète de base - nettoyage complet de base - Électricité vérifiée - Prête à l'emploi immédiatement

Stanje: novo, Leto izdelave: 2025, New machine Year of manufacture: 2025 Description: Technical Specifications Working width: 630 mm Table dimensions: 640 x 1000 mm Working height: - Maximum: 300 mm - Minimum: 3.5 mm Max. cutting depth per pass: 8 mm Minimum workpiece length: 260 mm Cutterblock diameter: 120 mm 4 knives: 35x3x640 mm Cutterblock speed: 4500 rpm Feed speed electronically adjustable: 4–20 m/min Feed motor (S6 -40%): 1.3 kW Extraction port diameter: 150 mm Standard Equipment and Accessories - Automatic thicknessing table lift with 2 speeds, including micrometric positioning - Thicknessing table with vertical movement via 4 steel lead screws - Electronic 2-axis control for the setting of: * programmed thicknessing table position * feed speed - Infinitely variable electronic feed speed from 4 to 20 m/min via inverter - Feed speed adjustment based on maximum main motor power consumption - Ribbed steel infeed roller - Two upper rubber-coated outfeed feed rollers - Interchangeable feed rollers - Independent pneumatic pressure regulation for upper feed rollers - Motor power 9 kW 50 Hz (11 kW 60 Hz) with automatic star-delta start: * S1] 7.5 kW / 10 HP 50 Hz (8.8 kW / 12 HP 60 Hz) * [S6 -40%] 9 kW / 12 HP 50 Hz (11 kW / 15 HP 60 Hz) Safety/Protection - Noise reducing guards at infeed and outfeed - Micro safety switch on the guard cover - Emergency stop switches at the front and rear of the machine - Lockable main switch - Motor protection circuit breaker - Low voltage control circuit (110 Volt) - Automatic motor brake - C.E. Declaration of Conformity Production code: S 7 109999 Standard safety regulations 530314 TERSA – cutterblock (monoblock version) with disposable reversible cutters 083201 Stand 930731 Voltage 400 V EU Lodpfsy D U A Iex Aamerp R02017 L'invincibile S 7 CE version 931201 Frequency 50 Hz 109993 MACHINE LANGUAGE: German Availability: short term Location: Flörsheim

Stanje: novo, Leto izdelave: 2025, New machine Year of manufacture: 2025 Standard equipment and accessories - Swiveling control panel easily accessible to the operator "eye-S 15" electronic control system. Includes: * 15" touchscreen monitor * Direct control of 6-8 axes with manual, semi-automatic, and automatic operation modes * Operator assistance with the option to manage 3 different points on the tool for precise determination of the zero point * Capacity to store up to 1,000 programs with related images * Capacity to store up to 1,000 different tools with related images * USB port * Network connection ready - Operator assistance on the electronic control system including: * Tool database management * Indication of coordinates for 3 points on the tool to define a new zero point * Management of the tool's edge speed * Operator guidance for common machining operations - "Flex" milling fence with automatic adjustment via electronic control. Complete fence compensates for tool diameter, infeed jaw for desired chip removal. The "FLEX" fence can be moved away from the worktable. - Aluminum fence jaw for the milling fence with inserts for a continuous support surface - "Fast" table insert, manually adjustable, replaces table rings for optimal workpiece support area adjustment - Electrical pre-wiring for a power feed unit - Spindle with reversible direction (right/left rotation) - Automatic motor start - M-E version includes: * Electrospindle with maximum performance from 3,400 rpm * Electrospindle power 7.5kW 10HP [S6 -40%] * Interchangeable MK5 spindle * Frequency inverter for speeds from 900 to 12,000 rpm - Interchangeable MK5 milling spindle Safety/Protection - Milling cutter guard, maximum tool diameter 160 mm - Electronic motor brake with guaranteed function even in case of power failure - Safety sensors during tool change for: spindle stop, spindle lock, tool holder open/close - Electropneumatic spindle lock - Micro safety switch at machine door - Emergency stop switch - Lockable main switch - Motor protection circuit breaker - Auxiliary circuit 24V - EC Declaration of Conformity - Frequency 50 Hz (931201) - Base (083250) - MACHINE LANGUAGE: German (109993) - Standard safety regulations (109999) - 570257 Manual device for feed support height adjustment according to workpiece thickness with mechanical digital display and horizontal adjustment according to tool diameter. Thanks to the operator panel column, this device allows the power feed unit to be swung away from the worktable. - 930731 Volt 400 EU Lodpox Nbzujfx Aamsrp - 570288 Quick tool clamping "T-SET" Enables clamping/releasing tools using a simple air gun. - R00845 L'invincibile TI 5 CE version - 110293 LL version worktable with two cast iron table extensions. Total length 2500 mm, complete with extendable support rail for wide workpieces - Emergency stop switch - 131304 Milling spindle diameter 30 mm. Availability: prompt

Stanje: zelo dobro (rabljeno), Na voljo količina: 10 kosov. Visokokakovostna hladilna naprava za elektro omare Rittal iz serije TopTherm v zelo dobrem stanju (rabljeno). Naprava je primerna za zanesljivo klimatizacijo in hlajenje elektro omar ter industrijskih naprav. Robustna industrijska izvedba z visoko stopnjo zaščite in zmogljivo hladilno tehnologijo. Proizvajalec: Rittal Model: TopTherm SK 3304540 Tip naprave: hladilna naprava za elektro omaro Stanje: zelo dobro, rabljeno Datum izdelave: 10/2018 Serijska številka: 2018K000166679 Napetost: 400 V / 50 Hz / 3~ Alternativna napetost: 460 V / 60 Hz / 3~ Nazivni tok: 2,2 A Zagonski tok: 11,5 A Odklopnik: 6,3 – 10 A Ledpfjzgf Haox Aamerp Priključna moč: 0,64 kW Skupna hladilna moč po DIN EN 14511: 1,10 kW Senzibilna hladilna moč po DIN EN 14511: 0,94 kW EER L35 L35: 1,72 Hladilno sredstvo: R134a Količina hladilnega sredstva: 325 g GWP R134a: 1430 CO2 ekvivalent: 0,46 t Območje delovne temperature: 10 °C do 55 °C Razred zaščite notranji krog: IP54 Razred zaščite zunanji krog: IP34 Teža: 40 kg Hermetično zaprto: da Preizkušeno na puščanje po EN-378-2

Stanje: novo, Leto izdelave: 2026, vrsta goriva: dizel, proizvajalec motorjev: Perkins 404J-22G, Namen uporabe: gradbeništvo Lastna teža: 735 kg Moč generatorja: 20 kVA Dimenzije tovornega prostora: 172 x 92 x 130 cm CE-oznaka: da Emisijska stopnja: Stage V / Tier IV final Volumen vodnega rezervoarja: 56 l Država proizvajalke: CN Za več informacij se obrnite na ekipo DPX. = Druge možnosti in dodatna oprema = - Baterija - Nadzorna plošča - Jeklena streha Lrodpfjzc Dxbox Aamop - Cisterna

Stanje: rabljeno, prevoženi kilometri: 878.129 km, moč: 310 kW (421,48 KM), prva registracija: 05/2013, vrsta goriva: dizel, skupna masa: 25.000 kg, konfiguracija osi: 3 osi, zavore: retarder, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, parkirni grelec, Special equipment: Axle load measuring device, front axle load 8.0 t, start assist with timer control, work lights, exhaust outlet downward right, right exterior mirror with maneuvering position, CB radio, compressed air connection in cab, high-pressure air unit, air horn, electrical and lighting for swap body frames, cab: steel-sprung, standard, fire extinguisher, Fleetboard vehicle computer, fuel tank: 630 liters aluminum, air intake on cab side, roof air deflector (latched, without base trim), 2-cylinder air compressor, tire pressure monitoring system, side-mounted spare wheel hoist, retarder, acoustic reversing warning (external warning signal), tail lift switch, drawers under sill, circuit breaker, sunblind for side window, driver’s door, additional 24V socket in passenger footwell, Fleetboard preparation. Lrsderx Ndtjpfx Aamjp Additional equipment: Axle configuration: 6x2, Actros, trailer brake 2-line system, connections left side, trailer socket 24V / 15-pin, audio system: radio with USB port, exterior mirrors electrically adjustable and heated, functional passenger seat, rear axle differential lock, steel compressed air tanks, EURO 6 engine, cab width: 2.30 m, cab: L StreamSpace, cab floor with 170 mm engine tunnel, folding driver's seat backrest, suspension: air/air (full air suspension), electric window lifts, tinted windshield, generator 100 A, 12-speed transmission - type: G 211-12, urea (AdBlue) tank: 60 liters, rear axle crown wheel 440, information display 10.4 cm with additional indicator, body/chassis: chassis, comfort lower bunk, central locking system, communication interface, radiator grille blind, regulated steering assist pump, liftable tag axle, engine 12.8 liters – 310 kW inline 6 diesel (OM 471), engine brake, engine compartment encapsulation, single tires on tag axle, ramp mirror, spare wheel, residual heat utilization, disc brakes on front and rear axles, driver's standard air-suspended seat, seat cover/upholstery: fabric, voltage converter 24V/12V, 10A, front spray protection, front axle stabilizer, additional stabilizer rear/tag axle, external storage flap left, 24V cab socket, tachograph / EC control device, extended cab doors, aerodynamically shaped underrun protection front, toll recording preparation, dropped front axle, regulated water pump, permitted gross weight 25.00 t, auxiliary heater (water) * WDB9630201L747236 * First registration: 15.05.2013 * Chassis length: 7.10 m * Wheelbase: 4600 / 1350 mm * Net price! * Our information is provided without warranty or guarantee. Tel./WhatsApp:

Stanje: rabljeno, Rotating Device Gunter Seibold Rotating Device for HTS Coils – Steplessly Adjustable Drive (Type S05082) Description: Professional rotating device for holding and rotating HTS coils with winding mandrel. Designed for the even distribution of two-component resin during the curing process. Ideal for research, laboratory, or production environments with high-temperature superconductor coils. The winding form is electrically heated, with power supply fed directly to the form (not included in scope of delivery). The machine excels with precise control, straightforward operation, and maintenance-friendly design. Technical specifications Robust machine stand: Welded square tube construction with leveling screws and floor anchors Drive: Three-phase planetary gear motor (11 kW, 400 V, 50 Hz, 3-phase) Stepless variable speed (0.2 – 100 rpm) Soft start & stop via frequency inverter (4-quadrant controller) Electromagnetic spring-loaded brake (safe stop in event of power failure) Reversible rotational direction (clockwise/counterclockwise) Control panel: 5.7" touchscreen for setting speed, direction, ramps, time, or number of revolutions Emergency stop button, ergonomically integrated 2 programmable analog inputs Electrics & control cabinet: Control integrated into machine base 400 V / 230 V supply, 24 V DC control voltage Circuit breakers, 30 mA RCD Sockets: 8× 230 V / 16 A, 2× 400 V / 16 A CEE, 1× 400 V / 32 A CEE Control cabinet with climate unit Complete grounding & static discharge of main spindle Ljdpfx Aszil R Roamsrp Workplace lamp adjustable in height and swivel Feature / Value Max. coil diameter: 1,500 mm Coil clearance: 1,700 mm Center height above floor: 1,100 mm Max. load on face plate: 500 kg Face plate: Ø 600 mm, 4 T-slots (DIN 650) Speed range: 0.2 – 100 rpm (stepless) Torque: 775 – 539 Nm Operating voltage: 400 V / 50 Hz Control voltage: 24 V DC Connected load: 11 kW Rated current: 32 A Color scheme (to RAL): Base machine: Blue (RAL 5010) Moving parts: Yellow (RAL 1021) Control panel / cabinet: Light grey (RAL 7035 / 5010) Weight: approx. 1,800–2,000 kg Condition: used Scope of supply: (See photo) (Specifications and details subject to modifications or errors!) We are happy to answer any further questions by phone.

Stanje: dober (rabljeno), 3D Systems Model: ProX™ 800 ProX™ 800 3D Production Printer by 3D Systems – High-Performance SLA Printer The unit has been regularly serviced Operating hours: 18,700 (as of 18/04/2023) Not operated after 18/04/2023 Note: Annual maintenance performed until disassembly For sale is a used ProX 800 stereolithography (SLA) production printer from 3D Systems. This large-format SLA system features state-of-the-art printhead technology, ideal for highly precise components and industrial applications (e.g., automotive, aerospace, medical technology). Additional features: - Automatic material refill system and prefabricated material feed module (quick module change, uninterrupted operation) - 3D-Manage™ software for CAD model and print job management - Device-integrated touchscreen control (Print3D Pro™) - Status/signal light module, centralized user interface - Comprehensive safety system including laser safety monitoring (Class I), emergency stop buttons and interlocks - Detailed maintenance and error diagnostics functions - Material container (MDM) Technical specifications: Printing technology: Stereolithography (SLA) with frequency-tripled Nd:YVO4 UV solid-state laser (355 nm, max. 3 W) Maximum build envelope: approx. 650 × 750 × 550 mm Dimensions (L × W × H): approx. 1370 × 1600 × 2260 mm Weight: approx. 907 kg Resolution: up to 0.00127 mm (laser spot size), 4000 DPI Ljdozii Umjpfx Aamorp Accuracy: ± 0.025–0.05 mm per inch Materials: wide range of Accura resins (robust, transparent, high-temperature resistant, biocompatible, etc.) Electrical connection: Power supply: 200–240 V AC Frequency: 50/60 Hz Phase: Single phase connection Circuit breaker: 30 A Weight: approx. 1200 kg incl. material module Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical data, information without obligation!) If you have further questions, we are happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Weiss Model: WK3-340/70 Weiss Climate Test Chamber, Air-Cooled Control Unit: Touchpanel All control and operating commands can be activated on the "Touchpanel" control unit by simply touching the function icons. Adjustable Feet To compensate for floor unevenness and to ensure sufficient ventilation of the machine section, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber is fitted with feedthroughs on the right and left sides. These allow measuring cables and test fixtures to be routed into the test chamber. Lrsdpeziiwusfx Aamjp Feedthroughs installed as standard: R1: Nominal Width 125 mm L1: Nominal Width 85 mm Volume: 335 liters Test Chamber Internal Dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External Dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Data for Temperature Tests: Minimum Temperature: –72°C Maximum Temperature: +180°C Temperature Deviation, over time: ± 0.1 to ± 0.5 K Temperature Uniformity, spatial: ± 0.5 to ± 1.5 K Temperature Change Rate, Cooling: 3 K/min Temperature Change Rate, Heating: 3 K/min Data for Climate Tests: Temperature Range: +10°C to +95°C Dew Point Range: -3°C to +94°C Humidity Range: 10 to 98% r.h. Temperature Deviation, over time: ± 0.1 to ± 0.3 K Temperature Uniformity, spatial: ± 0.5 to ± 1 K Humidity Deviation, over time: ± 1 to ± 3% r.h. Operating Data: Test Chamber Lighting: Halogen bulbs 2 x 24V, 50W Rated Voltage: 3/N/PE AC 400V ±10% 50Hz Rated Current: 16 A Rated Power: 4.9 kW Circuit Breaker (on-site): 16 A slow-blow Refrigerant: R-452A/R23 Weight: approx. 585 kg For your security as the buyer, please note the following information! The following items are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data and information reserved!) Feel free to contact us by phone for further questions.

Stanje: zelo dobro (rabljeno), Rowatec MM 33 - Transformer Welding Machine - Transformer with heavy-duty copper windings Lsdpfx Aeuyg Imjamerp - Output: 330A at 60% duty cycle, 250A at 100% duty cycle - Voltage range: 15.8V – 33V - Circuit breaker: 22A / 400V - Stepwise voltage regulation (10 fine adjustment positions, 2 coarse positions) - Stepless wire feed speed adjustment - 4-roll wire feed mechanism - Welding modes: 2-stroke, 2-stroke spot, 2-stroke timed, 4-stroke, 4-stroke spot, 4-stroke timed - Stepless setting of pause duration and welding time - Post-weld wire burn-back time adjustment

Stanje: rabljeno, popolnoma iz nerjavečega jekla Kapaciteta lijaka 270 L Širina forme 400 mm Uporabna površina forme 370 x 130 mm Maksimalna prostornina na takt: ± 1,47 kg maksimalno 50 taktov/minuto (odvisno od izdelka, oblike, temperature in nastavitev stroja) Skupna moč 8 kW Poraba zraka ± 300 L/min. Lsdpfszkg Imjx Aamjrp pomično brezstopenjska hitrost 3x400V 50Hz Dimenzije (D x Š x V): ± 2.200 x 1.000 x 2.100 mm Teža 1200 kg MC-krmiljenje z “bridge breaker”

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 20.000 h, vrsta goriva: plin, izhodna napetost: 6.300 V, izhodna frekvenca: 50 Hz, Jenbacher J620 generator na zemeljski plin. Popolna elektrarna: - Generator - Diane Lsdpozdtzyefx Aamerp - Krmilne plošče - Črpalke in ventili HT in LT - Hladilnik HT in hladilni stolp LT - Plinski vlak - Dušilec - Oljne črpalke - Preklopna stikala Vsa uradna poročila so na voljo. Boroskopske fotografije so na voljo. V primeru zanimanja vas vabimo, da kadarkoli organizirate ogled. Stanje: Trenutno demontirano in shranjeno v skladišču.

Stanje: dober (rabljeno), Pomožni kontaktni blok, pomožni kontakt, kontaktor, polprevodniški kontaktor, kontaktor, močnostni kontaktor, kondenzatorski kontaktor, kontaktor, kontaktor, močnostno stikalo, motorski kontaktor Lrjdpozh Hplefx Aamep - Proizvajalec: Siemens, Sirius Contactor pomožni kontaktni blok močnostni kontaktor nerabljen, originalna embalaža - Tip: 3RT1045-1AL24 3ZX1012-0RT04-1AA1 - Količina: 1x kontaktor na voljo - Mere škatle: 210/150/V80 mm - Teža: 1,9 kg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, SOCOMEC SIRCO DC 2000A Tip: Ločilni stikalo / Fotovoltaični izolator za enosmerni tok Nazivni tok: 2000A Napetost: Do 1000 V DC Uporaba: Fotovoltaični sistemi, sončne instalacije, izolacija električnih vezij Znamka: SOCOMEC (svetovno priznana znamka na področju zaščite in upravljanja z energijo) Stanje: Novo Visoka zmogljivost 2000A, zasnovano posebej za fotovoltaične aplikacije, zagotavlja zanesljivo delovanje v zahtevnih okoljih. Zanesljiva zaščita za sončne sisteme, omogoča varno izolacijo in odklop električnih vezij. Napredna tehnologija SOCOMEC, vodilnega proizvajalca opreme za upravljanje z energijo. Primerno za industrijske instalacije, ki zahtevajo zanesljivo izolacijo visokonapetostnih enosmernih vezij. Prednosti: Povečana varnost: Omogoča varno izolacijo fotovoltaičnih sistemov, kar je bistvenega pomena za sisteme z visoko močjo. Skladnost z mednarodnimi standardi: Zasnovano v skladu s strogimi varnostnimi standardi za električne instalacije. Trajnost: Robustna konstrukcija, idealna za zunanja in industrijska okolja. Enostavno vzdrževanje zahvaljujoč preprostemu in hitremu dostopu do komponent. SOCOMEC, enosmerno stikalo 2000A, fotovoltaični ločilni stikalo, fotovoltaično stikalo, sončno odklopno stikalo, stikalo za odklop, obnovljiva energija, upravljanje z energijo, SOCOMEC izolator, sončni sistemi, oprema z visoko močjo. Model: SOCOMEC SIRCO DC 2000A Tip: Ločilno stikalo / Fotovoltaični izolator za enosmerni tok Nazivni tok: 2000A Napetost: Do 1000 V DC Uporaba: Fotovoltaični sistemi, sončne instalacije, izolacija električnih vezij Znamka: SOCOMEC, svetovno priznano ime na področju zaščite energije in upravljanja z energijo Stanje: Novo Visoko zmogljivo ločilno stikalo 2000A, zasnovano posebej za fotovoltaične aplikacije, kar zagotavlja zanesljivo delovanje v zahtevnih okoljih. Zanesljiva zaščita za sončne sisteme, omogoča varno izolacijo in odklop električnih vezij. Napredna tehnologija SOCOMEC od vodilnega proizvajalca opreme za upravljanje z energijo. Primerno za industrijske instalacije, ki zahtevajo zanesljivo izolacijo visokonapetostnih enosmernih vezij. Prednosti: Povečana varnost: Omogoča varno izolacijo fotovoltaičnih sistemov, kar je bistvenega pomena za sisteme z visoko močjo. Skladnost z mednarodnimi standardi: Zasnovano v skladu s strogimi varnostnimi standardi za električne instalacije. Trajnost: Robustna konstrukcija, idealna za zunanja in industrijska okolja. Enostavno vzdrževanje zahvaljujoč preprostemu in hitremu dostopu do komponent. Lredszkf R Topfx Aamep Ključne besede: SOCOMEC, enosmerno stikalo 2000A, fotovoltaično ločilno stikalo, fotovoltaično stikalo, sončno odklopno stikalo, ločilno stikalo, obnovljiva energija, upravljanje z energijo, SOCOMEC izolator, sončni sistemi, oprema z visoko močjo.

Stanje: novo, številka stroja/vozila: 1602-2-2, prevoženi kilometri: 5 km, moč: 96 kW (130,52 KM), vrsta goriva: dizel, lastna masa: 2.750 kg, največja dovoljena obremenitev: 750 kg, skupna masa: 3.500 kg, medosna razdalja: 3.445 mm, gorivo: dizel, Izpusti CO₂: 196 g/km, barva: bela, voznikova kabina: drugo, vrsta prenosa: mehanski, emisijski razred: Euro 6, vzmetenje: jeklo, dolžina tovornega prostora: 3.500 mm, širina tovornega prostora: 2.250 mm, višina nakladalnega prostora: 2.300 mm, Oprema: ABS, airbag, centralno zaklepanje, elektronski program stabilnosti (ESP), klimatska naprava, nadzor oprijema, računalnik na krovu, sistem za imobilizacijo, tempomat, Citroen Jumper Euro6 3500kg New Vehicle EU new car Mileage: 5 km Fuel: Diesel kW/HP: 96/131 6-speed manual transmission Engine capacity: 1,997 cm³ Particle filter, air conditioning, daytime running lights, rear-view camera, ESP, ABS, on-board computer, heated mirrors, electric front windows, central locking with remote control, emission class (LCV): Euro 6, COC documents. Sales body made of GFRP Superlight in sandwich construction with alcove, unused and featuring a large sales flap across the entire right side of the vehicle, 2/3 seats, suitable with driving license class B, rear step, LED lights, rear-view camera, slip-resistant industrial floor R11. Various low-frame chassis available (Fiat, Citroen, Opel). Box body internal dimensions WxDxH: 3500 x 2250 x 2300 mm Side flap: 3270 x 1480 mm Permissible gross vehicle weight: 3,500 kg Unladen weight: 2,750 kg Paint finish on request Lredpfx Aajf D Eg Tjmjp Interior fitting Left side: 1 work surface with stainless-steel worktop, sliding doors and intermediate compartment, approx. 3500 x 600 x 850 mm 1 double sink approx. 600 x 600 x 850 mm (WxDxH) incl. fresh and wastewater tank, boiler and pressure system, soap and paper dispenser, 12V automatic charger for starter battery. 4 wall shelves (white) with aluminium edge profile, 2 left at 1250 mm and 2 right at 1250 mm. Right side: 1 refrigerated counter, 800 mm deep, with compressor, storage compartment with extra bottom doors, foam-insulated housing, display area in stainless steel, aluminium work surface and front glass, temperature range +1°C to 7°C, approx. 3500 x 800 x 1100 mm (WxDxH). Additional equipment: Storage shelf above the sales flap, folding bag shelf at the sales opening. 2 LED ceiling panels, 3 dimmable LED spotlights above the sales counter and LED counter lighting. Standard electrical installation: 380 Volt/16A, switchable to 230 Volt/16A, 2 x CEE-compliant power inlets, RCCB, 16-amp circuit protection with inspection, 5 double sockets, hygiene package. Subject to error and prior sale!

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, nazivna (navidezna) moč: 63 kVA, sekundarna napetost: 200 V, vrsta izhodnega toka: trifazni, izhodna napetost: 200 V, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, Suhi transformator, trifazni, 63 kVA, primarno navitje: 3 x 400 V, sekundarno navitje: 3 x 200 V Za prodajo trifazni transformator 63 kVA v odličnem stanju Ledpfxeydrgpj Aamorp Proizvajalec: Trafó Print Tip: BTZ63000 Moč: 63 kVA Primarno navitje: 3 x 400 V (3x125A) Sekundarno navitje: 3 x 200 V Frekvenca: 50 Hz Kompaktni odklopnik GE Record D250 Jekleno ohišje

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Maks. delovna temperatura: 90° C. Maks. delovni tlak: 2 kg/cm². Moč: 3.000.000 kcal Gorivo: lesni odpadki MTN kotel je generator tople vode, ki kot gorivo uporablja žagovino ter ima nalaganje goriva s pomočjo gorilnika tipa "AUTOFOCO". Kotel je vodoravnega tipa. Cevaste plošče in plašč so izdelani iz debele pločevine iz ogljikovega jekla. Jedro je prevlečeno z ognjeodpornim cementom z visokim deležem aluminijevega oksida. Na zadnji strani je litoželezna rešetka za zgorevanje trdnih kosov lesa, izračunana za izhodno moč enako 60 % nazivne moči kotla. Cevni snopi so iz ogljikovega jekla. Osnova s kuriščem je večjih dimenzij, kar omogoča namestitev gorilnika s čepom. Lrodpfx Aaetywzqemjp Kotel je opremljen z razdelilnikom zraka. Telo kotla je izolirano z mineralno volno in obloženo z litoželezom. Dodatna oprema: - 1 nastavljiv termostat - 1 varnostni termostat - 1 varnostni termostat z ročnim vklopom - 1 termometer - 1 hidrometer - 1 naprava za nadzor zgorevanja - 1 termostatski ventil, nameščen v dimni cevi ROČNO POLNJENA REŠETKA je fiksna rešetka iz posebnih nodularnih litoželeznih palic, pritrjena v ognjeodporno maso in enostavno zamenljiva. 1 komplet električnih komponent, zaščita motorja, kontaktorji. 1 komplet dodatkov za ožičenje. 1 glavno stikalo. 1 napajanje za pomožna vezja. 1 vezalno shemo. 1 manometer. 2 temperaturni sondi. 1 sistem za odsesavanje prahu, sestavljen iz ventilatorja z jermenskim prenosom, z dekantacijskim ciklonom, povezavami kotel-ciklon, ciklon-ventilator, ventilator-ventilator, ventilator-dimnik, vse izvedeno iz barvanega ogljikovega jekla. 1 dimnik.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Splošne informacije Predvidena uporaba: gradbeništvo Referenčna številka: 8 Ledpfxsy A I Saj Aamsrp Teže Lastna teža: 1.200 kg Funkcionalnost Dimenzije tovornega prostora: 120 x 80 x 80 cm Označitev CE: da Vzdrževanje, zgodovina in stanje Število lastnikov: 1 Tehnično stanje: zelo dobro Optično stanje: zelo dobro Dodatne informacije Primerno za naslednje stroje: 17 – 29-tonske bagri Pogoji dostave: EXW Delovni tlak: 160–180 bar Potrebna hidravlična pretoka: 155 l/min Frekvenca udarcev: 330 – 680 Zadnji pregled: 2025-12-09 Država proizvodnje: DE Dodatne informacije Za dodatne informacije se obrnite na Ö. Inalkac.

Stanje: rabljeno, Auxiliary circuit breaker, automatic circuit breaker, fuse, line circuit breaker, miniature circuit breaker Lrsdeb Nkvrepfx Aamjp - Manufacturer: Siemens - Model: 5SY6106-7 - Quantity: 46 units available - Price: per piece - Dimensions: 90/26/H75 mm - Weight: 0.2 kg

Stanje: rabljeno, Auxiliary circuit switch, circuit breaker, fuse, line switch, miniature circuit breaker, load disconnect switch, terminal connector plate, load isolator Lodpfsffwpfsx Aamjrp -Rittal: SV9343.050 Load Disconnect Switch -Current rating: 160 A -Price: per unit -Quantity: 5 units -Dimensions: 215/105/H195 mm -Weight: 1.2 kg/unit