Lafert Ms 132Sc2 Bremsmotor Sn: 119299 nakup rabljenega (6.170)

Stanje: rabljeno, Leto izdelave: 2004, vrsta prenosa: drugo, prva registracija: 01/2004, barva: oranžna, prevoženi kilometri: 1.001 km, voznikova kabina: drugo, Vehicle location: Bovenden Dodskn Aamspfx Apljcg Body: Küpper Weisser IMSSN, Drive type E2940HFA. Hydraulic drive, wet salt system with 1950 L tank. Folding roof, protective grille, unladen weight: 1,365 kg. ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to change, prior sale, and errors excepted!

Leto izdelave: 2026, stanje: novo, - 260 mm cutting height - 750 mm passage width - 5–30 m/min infinitely variable feed rate - 2 x 75 kW saw motors - 3 kW feed motor - 70 mm saw shaft diameter - 400 mm saw blade diameter Dodpfobu Rqpjx Aplecg - 5,000 kg weight

Stanje: novo, Leto izdelave: 2024, Maximum cutting height: 160 mm Maximum cutting width: 600 mm Feed rate: 5-30 m/min Saw motor: 37 kW (higher kW optional) Feed motor: 2.2 kW Maximum number of saw blades at 145 mm: 6 Saw spindle diameter: 70 mm Weight: 3,200 kg Special equipment: - Electric height adjustment of infeed rollers - Laser with alignment adjustment Dcjdpfou I Dmox Apljg - Powered roller conveyors - Electronic braking system

Leto izdelave: 2024, stanje: novo, - 150 mm feed height - 430 mm feed width - 30 mm chip length - 2 chopping knives + 1 counter knife - 440 mm rotor diameter - 590 rpm rotor speed - 30 m/min feed rate - 37 kW main motor - 3 kW and 2.2 kW infeed rollers Dsdpfx Asful Uioplscg - 6,000 mm long infeed conveyor belt - 2,000 mm long discharge conveyor belt underneath the machine

Leto izdelave: 2024, stanje: novo, - 6,000 mm cutting length - Minimum cutting length 600 mm - 5 saw supports - Cutting height 80 - 140 mm Dsdpfx Ajpfcgaeplecg - 4 kW saw motor - 1.5 kW variable feed 10-30 m/min Optional: - Disposal conveyor belts

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, • 350 mm maximum cutting height • 75-250 mm minimum/maximum cutting width • 100 – 350 mm minimum/maximum round timber diameter • 18-80 mm side board width • 1.8 – 6 m cutting length • 550 mm saw blade diameter • 4/6 simultaneous saw cuts • 5-30 m/min variable feed speed • 2 x 30 kW and 2 x 22 kW saw motors • 3 kW SEW feed gearbox motor • Automatic 6-position width adjustment • Infeed table with 3-way turning device • 2 pairs of centering rollers with pneumatic pressure Dsdpehkh Npjfx Aplecg • Powered infeed roller with 0.75 kW motor and pneumatic pressure • 2 pairs of powered outfeed rollers, each with 0.55 kW motor • 4 pairs of pneumatic pressure rollers in outfeed

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, - 340 mm cutting height - 70–250 mm maximum cutting width - 500 mm pass-through width - 6000 mm feed length Dedpehkh N Tofx Aplscg - 3–20 m/min feed speed - 2 x 30 kW saw motors - 1.1 kW feed motor - 0.25 kW width adjustment motor - 1300 kg weight

Leto izdelave: 2024, stanje: novo, - 4 singulation stages - Log length on request Dcodpepfaubsfx Apleg - Log diameter on request - Discharge height on request - 5.5 kW SEW geared motor - R127 SEW gearbox

Leto izdelave: 2024, stanje: novo, - 160 mm cutting height - 750 mm maximum cutting width - 5–50 (100) m/min stepless feed speed - 37–110 kW saw motor - 75 mm saw shaft diameter Dcjdobrq Ndepfx Aplog - 30–500 mm min/max edging width - 2 adjustable saw guides

Leto izdelave: 2024, stanje: novo, - 10,000 mm standard length Djdpfx Aebrq R Dsplocg - 800 mm standard roller width - 2.2 kW roller conveyor drive - 0.75 kW feed roller drive - pneumatic roller lifting - pneumatic centering

Leto izdelave: 2024, stanje: novo, - 8000 mm standard length - 800 mm roller width - 1.5 kW drive gear motor Dcodpfjbu Sb Dex Aplsg - 0.75 kW cross transport drive

Leto izdelave: 2024, stanje: novo, Round timber cross conveyor - Number of chain strands according to customer specifications - Length and width according to customer specifications - Heavy-duty SEW geared motors Djdpfx Aehmp Ibjplscg - Solid pin conveyor chain with protective rollers

Leto izdelave: 2024, stanje: novo, • Chopping height: 240 mm • Chopping width: 540 mm Dodpenyidbefx Aplocg • Chopping length: approx. 25–35 mm • Number of chopping knives: 2 • Rotor diameter: 600 mm • Rotor speed: 590 rpm • Feed motors: 4 + 3 kW • Main motor: 45 kW / 55 kW / 75 kW • 6,000 mm infeed conveyor • 2,000 mm discharge conveyor beneath the machine

Leto izdelave: 2024, stanje: novo, max. cutting height - ø 340 mm min./max. cutting width: 80 - 250 mm min./max. side board: 18 - 80 mm max. cutting length: 6,000 mm feed rate: 5 - 30 m/min saw motors: 2 x 55 kW feed motor: 4.0 kW width adjustment motor: 0.55 kW infeed roller motor: 0.75 kW weight: 8,000 kg Dcodpfx Apeu Izkjlsg Special features: Synchronously adjustable laser infeed table extension up to 8,000 mm automatic width adjustment with 6 fixed positions equipment for 1,000 mm diameter blades motor-driven log turning device electronic braking system

Leto izdelave: 2024, stanje: novo, The plant is available immediately! • Suitable for round timber diameters from 10 cm up to 50 cm Dcedjgvu Alspfx Aplsg • Suitable for round timber lengths from 2 – 6 m • 4-strand infeed conveyor, 6 m long • 4-strand singulator, 2 m long • 4-strand separator, 2 m long • Conveyor with pin conveyor chain M 112 and protective rollers • Block haul with 2-inch chain and pusher dogs • Special pushers for low-noise transport • Measurement with 1 mm resolution • Measuring frame with additional heating and sun protection roof • Display of all operating statuses on a 17" monitor • Fully automatic sequence control • Various storage options and sorting criteria • 5 ejectors left/right, powered by SEW geared motors with brake • Spacious, thermally insulated control cabin • 4 surveillance cameras with flat screen monitor • Control cabinet with all cables included • Sorting criteria as agreed

Leto izdelave: 2024, stanje: novo, max. cutting height: 160 mm max. cutting width: 600 mm min./max. edging width: 25-300 mm width adjustment times: 0.2-1.0 sec. feed rate: 5-30 (70) m/min saw motors: 37 kW (higher kW available) feed motor: 2.2 kW saw shaft diameter: 70 mm weight: 3,500 kg Standard equipment: 1 adjustable bushing Dodsu I D Djpfx Aplocg 1 fixed bushing digital cutting width display automatic cutting width adjustment Optional equipment: electric height adjustment for feed rollers laser with adjustment device driven roller conveyors electronic braking system

Leto izdelave: 2024, stanje: novo, - 50 mm cutting height - 1210 mm maximum cutting width - 12 feed rollers - 10-30 m/min stepless feed rate - 37 kW saw motor (higher output available) - 2.2 kW feed motor - 70 mm saw shaft diameter - 225 mm circular saw blades - 4000 kg total weight Dodjfdzrhepfx Aplocg

Leto izdelave: 2024, stanje: novo, - Machine with 3 pairs of feed rollers - Infeed and centering trough - Minimum log diameter: 100 mm - Maximum log diameter: 600 mm - Minimum log length: 2,000 mm - Feed speed: 30 m/min - 5 interchangeable carbide knives Djdpjfvbphefx Apljcg - 37 kW debarking motor - 9.2 + 5.5 + 7.5 kW feed drive units - Total weight: 9,000 kg

Leto izdelave: 2024, stanje: novo, • 2.5 – 6 m cutting length • 120 – 450 mm maximum cutting height • 80 – 250 mm cutting width • Infeed table with centering rollers Djdpfxogp Su Es Aplocg • Infeed table with log turning device • Saw with 6-stage width adjustment • Outfeed bridge with 2 powered outfeed rollers • Outfeed bridge with 5 pairs of pressure rollers • 650 mm saw blade diameter • 2 x 37 kW bottom saw motors • 2 x 30 kW top saw motors • 6 saw cuts • 4 kW SEW feed gear motor • 5 – 30 m/min stepless feed speed

Leto izdelave: 2024, stanje: novo, max. cutting length 3,000–8,000 mm min. cutting length 500 mm max. cutting height 80–140 mm Dodoxfzlepfx Aplocg infinitely variable feed rate 10–30 m/min saw motor power 4.0–7.5 kW feed motor 1.5 kW number of saw carriages 2–6 weight 1,000–2,500 kg

Leto izdelave: 2024, stanje: novo, - 340 mm maximum cutting height - 70–250 mm maximum cutting width - 500 mm passage width - 6000 mm cutting length - 3–20 m/min feed speed - 2 x 18.5 kW saw motors - 1.1 kW feed motor Dcedo E Rg Sjpfx Apljg - 0.25 kW width adjustment motor - 1300 kg weight

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Good day, We are offering our very well-maintained cross-cut saw from MS Maschinenbau. Technical specifications: - Cutting lengths between 600 mm and 3000 mm - Workpiece thickness: min. 3 mm, max. 100 mm - Feed rate: 5–30 m/min, stepless adjustment - Roller conveyor included - Condition: as new Dcedetykw Sepfx Apljg The machine can be inspected and tested if you are interested. If you have any questions, please feel free to contact us.

Stanje: rabljeno, prevoženi kilometri: 1 km, prva registracija: 06/2006, Leto izdelave: 2006, številka stroja/vozila: 036 / 16, Special features Body-mounted spreader with body extension: 1.80-1.85 m, conveyor belt spreader, side wheel drive, RO-RO system, lighting, electric control panel (not tested), folding roof, access ladder, electric stationary discharge Capacity: 4 m³, Wet salt: 2,660 l, Sale in existing condition!! Dcedpfxeikp Igs Apleg

Stanje: novo, številka stroja/vozila: Modell AMHE 71Z XA2, moč: 0,37 kW (0,50 KM), model motorja: Modell AMHE 71Z XA2, 🔍 Specifikacije proizvoda: • Proizvođač: Laferf (Proizvedeno u Italiji) • Model: AMHE 71Z XA2 • Snaga: 0,37 kW (približno 0,5 KS) • Brzina: 2.810 o/min (2-polarni, 50 Hz) • Klasifikacija učinkovitosti: IE2 (Visoka učinkovitost prema EU standardima) • Stepen zaštite: IP55 (Zaštita od prašine i otporan na mlaz vode) • Klasa izolacije: F • Režim rada: S1 (Neprekidan rad) • Veličina kućišta: 71Z • Tip hlađenja: IC411 (samoventilirajuće s internim ventilatorom) • Stanje: Novo/nekorišćeno Dcedpfx Ajwuc Eleplog • Dostupna količina: ⚠️ Cena je za 1 motor. Dostupno 40 komada. Prilikom kupovine više komada odobravamo popust – kontaktirajte nas za količinske popuste ili kombinovanu isporuku!

Stanje: novo, Dolžina: 3000 mm iz zaloge Dsdporcb A Rofx Aplocg