Kubota Kx018-4 nakup rabljenega (60.951)

Stanje: rabljeno, Pogon: gosenice Gkedpfozwgmpsx Ac Hob Cena: na zahtevo Proizvajalec: Kubota, Japonska

Stanje: dober (rabljeno), Heidelberg Stahlfolder Ti 52 4/4/1 stroj za zgibanje Stroj je konfiguriran za zgibanje do 16 strani. Tehnične specifikacije: Minimalna velikost papirja: 105 x 150 mm Maksimalna velikost papirja: 520 x 840 mm Visokozmogljivo podajanje Konfiguracija: – 4 kasete na prvem modulu Ti-52 – 4 kasete na drugem modulu 2.Ti-52 – 1 elektronski nož – Mobilna dostava Nastavitev hitrosti zgibanja z inverterjem Gedpfx Ajzmu Hiec Hekb Zmanjšanje hrupa kaset Beckerjev kompresor Senzor dvojnega lista Elektronski števec z razvrščanjem Električna dostava z nastavljivo hitrostjo dostave. Rezervni deli, orodje in dokumentacija so vključeni. Stroj je v dobrem stanju in pripravljen za uporabo.

Stanje: dober (rabljeno), GUK K50/4/1/FL 2-50 Avtomatski zložljiv stroj Stroj v popolnem stanju, pripravljen na proizvodnjo. Format: 500x700 mm. Hitrost zlaganja: 30–160 m/min Oprema: 4 vzporedne kasete, elektronsko nastavljive preko računalnika 1 prečni rezalni nož Razširjena prva kaseta Neprenehna regulacija hitrosti preko inverter krmilne plošče Števec z možnostjo serijskega štetja in prikazom hitrosti zlaganja Gsdpfx Aozmu Hcec Hekb Rietschle kompresor Povišan zvočno izoliran pokrov Valj za orodja za vgradnjo pripomočkov kot so perforacija, biganje in rezanje Podajalnik FL2-50 z vakuumsko enoto Okenska kaseta z nadzorno enoto Mobilna dostava s stalno regulacijo hitrosti.

Leto izdelave: 1987, stanje: pripravljen za uporabo (rabljen), Ponujamo 5 strojev za obdelavo kovin različnih proizvajalcev. 1) Stolpni vrtalni stroj VEB BS16, letnik: 1960, teža: 110 kg. 2) Frezalni stroj Fritz Werner. 3) Stolpni vrtalni stroj Infratirea 4GC02502, letnik: 1987. 4) Stolpni vrtalni stroj Infratirea, letnik: 1987. 5) Radialni vrtalni stroj Tianjin št. 4 Z3063×20. Gsdpfxozqfxds Ac Hokb

Stanje: dober (rabljeno), 4 x Bonfiglioli Wind turbine gearbox JB00001227 SN B6201603697 Gkjdpfxswg E Uts Ac Hjb

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: EAN0729389556525, nosilnost na odsek shranjevanja: 3.000 kg, skupna dolžina: 44.800 mm, skupna višina: 4.500 mm, razmak između stupova: 3.600 mm, višina police: 4.500 mm, število vrst polic: 4, prosta razpetina: 3.600 mm, višina okvirja: 4.500 mm, širina okvirja: 1.100 mm, obremenitev na par nosilcev (maks.): 3.000 kg, dolžina police: 44.800 mm, dolžina opore: 3.600 mm, 4 vrste regalov za palete (M45113615-3) Vsaka: 11,2 m dolžine, 4,5 m višine, 1,1 m globine, po 3 polja, širina polja 3,6 m, po 3 nivoji prečk, nosilnost na polje 3000 kg. - 16 okvirjev (RM4511 – RAL5019) - 32 osnovnih plošč, podložni material, pritrdilni material - 64 talnih sider (ZZBA1210) - 72 posameznih prečk dolžine 3,6 m (T3615 – RAL2008) - 4 tablice s podatki o nosilnosti (BSMcP) Okvirji so vijačeni, niso predhodno sestavljeni. Prevoz / Dostava: - največ 20 delovnih dni po prejemu plačila - dostava brezplačno na gradbišče / mesto montaže - razkladanje iz tovornjaka izvede kupec z lastno dvižno napravo Gkedpfx Acozg Am De Hsb - Dostave po celotnem območju Zvezne republike Nemčije, razen otokov! Dostave v države EU po individualnem dogovoru.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, nosilnost na odsek shranjevanja: 3.000 kg, skupna dolžina: 34.000 mm, skupna višina: 4.500 mm, višina police: 4.500 mm, število vrst polic: 4, prostor za palete: 108 evropske palete, višina okvirja: 4.500 mm, širina okvirja: 1.100 mm, obremenitev na par nosilcev (maks.): 3.000 kg, dolžina police: 8.500 mm, dolžina opore: 2.700 mm, 4 vrste paletnih regalov (4 x M45112711-2) v vsaki dolžina 8,5 m, višina 4,5 m, globina 1,1 m, v vsaki 3 polja, širina 2,7 m, Gkedpfx Acjzf Dgvj Heb v vsaki 2 prečni nivoji, nosilnost police 3000 kg. - 16 okvirjev (RM4511 - RAL5019) - 32 osnovnih plošč, podložni material, pritrdilni material - 64 talnih sider (ZZBA1210) - 48 posameznih prečk (T27114 - RAL2008) - 4 tablice o nosilnosti (BSMcP) Okvirji so vijačeni, niso predmontirani. Prevoz / dostava: - največ 20 delovnih dni po prejemu plačila - dostava na gradbišče / mesto montaže - razkladanje iz tovornjaka opravi kupec z lastno dvižno opremo. - dostave po celotnem območju Nemčije, razen otokov! - dobava v države EU po individualnem dogovoru.

Stanje: rabljeno, moč: 22 kW (29,91 KM), Leto izdelave: 2015, obratovalne ure: 3.329 h, Pogon: gosenice Lastna teža: 3.520 kg Za dodatne informacije se obrnite na Emala Jaweeda. Godpjzc I Uyjfx Ac Hokb Minibager, Kubota KX101-3A3, letnik 2015, število delovnih ur: 3.329, dolžina: 4,20 m, širina: 1,53 m, višina: 2,33 m, teža: 3.520 kg, moč motorja: 22,9 kW, zračno vzmeten sedež, radio, hitra menjava Lehnhoff, poravnalno rezilo, žlica. Drugo: * Več kot 200 ponudb v prodaji. * Naša lokacija je 30 km severno od letališča Frankfurt/M. * Možnost financiranja in leasinga. * Specializirani smo za prevoze in ladijski transport po vsem svetu. * Izključena je odgovornost za tiskarske in pisne napake. * Pridržujemo si pravico do sprememb in prodaje vmes. * Možna je menjava staro za novo. * Za nakup vozil/prodaj rabljenih strojev veljajo izključno splošni pogoji poslovanja podjetja Jaweed GmbH. * Več informacij in naše splošne pogoje najdete na naši spletni strani.

Stanje: rabljeno, Leto izdelave: 2010, obratovalne ure: 504 h, moč: 10 kW (13,60 KM), Obratovalne ure: 504_____Kubota B 1620 mali traktorLetnik: 2010Prva registracija: 2020Obratovalne ure: 504Motor: 719 ccm, 10 kWMenjalnik: 6 naprej/2 nazaj, 19 km/hPTO 540/1000 Zadnji dvigovalnik, možnost 2 dvostranskih ventilovKabina z rotacijsko opozorilno lučjoČelni nakladač z žlicoProdaja po § 25a UStG obdavčenje razlikeLokacija skladišča: ni navedeno Gedezfu Abspfx Ac Hjkb

Stanje: zelo dobro (rabljeno), Naprodaj CNC vrtljiva miza priznane znamke Fadal Engineering (ZDA), model VH65. Profesionalna 4. os, namenjena obdelovalnim centrom, predvsem Fadal VMC, možna pa je tudi integracija z drugimi CNC stroji z ustreznim krmilnikom. Tehnični podatki: • Model: VH65 • Premer plošče: 165 mm (6,5”) • Prenos: 90:1 • Pnevmatska zavora (M60 VKLOP / M61 IZKLOP) • Industrijski več-pinski konektor • Serijska številka: 4630298. Stanje: rabljeno, mehansko brezhibno, običajni znaki uporabe. Trdna in težka konstrukcija – idealno za natančno 4-osno obdelavo. Gjdew R St Nepfx Ac Hjkb

Stanje: zelo dobro (rabljeno), Na prodaj profesionalna CNC vrtljiva miza priznanega proizvajalca Fadal Engineering (ZDA, hčerinska družba Giddings & Lewis Inc.), model VH65. Opremljena s stružnim vpenjalom Röhm ZG Ø125 mm, kar bistveno poveča vsestranskost uporabe. Tehnične specifikacije: • Model: VH65 • Premer plošče: 165 mm (6,5”) • Prenos: 90:1 • Pnevmatska zavora (M60 VKLOP / M61 IZKLOP) • Stružno vpenjalo Röhm ZG Ø125 mm – maks. 4000 vrt/min, moment 80 Nm • Serijska številka: 6660297 • Industrijski večpin priključek Stanje: rabljeno, mehansko popolnoma delujoče, običajni znaki uporabe. Masivna, težka konstrukcija – jamstvo za natančnost in dolgo življenjsko dobo. Pripravljena za uporabo kot dodatna 4. os v obdelovalnem centru. Gedpfx Acow R Syis Hskb

Stanje: zelo dobro (rabljeno), Beading Machine / Sheet Metal Edge Forming Machine by renowned German manufacturer Weberwerke Siegen. The machine is designed for edging, hemming, and beading (creating ribs) on sheet metal edges. Its robust and heavy cast iron construction ensures stable and precise operation. The open C-frame allows for processing large sheets and long components. The electric drive with a large flywheel guarantees smooth operation and sufficient torque for forming sheet metal. The pressure and roller guidance are mechanically adjustable. Nameplate data: • Model: BM 4 Gksdpsyga T Njfx Ac Hjb • Year of manufacture: 1952 • Working width: up to 1250 mm • Sheet thickness: up to approx. 4–5 mm (depending on material) • Material strength: Gb = 45 kg/mm² This machine is not a shear – it does not cut sheet metal; it is exclusively for shaping it. Used condition, complete, with visible signs of use consistent with its age. Ideal for locksmith shops, tool rooms, maintenance departments, as well as restoration work and one-off or small-batch production.

Stanje: zelo dobro (rabljeno), A robust industrial machine of German manufacture: Walther Trowal, model DLT 4, year 1980. The device is designed for surface finishing of metal, aluminum, or plastic components, using the vibratory finishing process (deburring, edge rounding, polishing, cleaning). Classic rotary drum construction – reliable, heavy-duty, and durable, typical of "West Germany" manufacturing. Technical specifications: • Model: DLT 4 • Manufacturer: Carl Kurt Walther GmbH & Co. KG, Wuppertal-Vohwinkel (West Germany) • Year of manufacture: 1980 • Drive type: ZOD71N 10 • Motor power: 0.38 kW • Power supply: 380 V / 50 Hz • Rotational speed: 31 / 61 rpm • Range: 3.5 – 7 rpm • Drum diameter: Ø 70 cm • Working length: approx. 80 cm • Net weight: 825 kg Condition description: • Machine is complete, drum rotates freely and smoothly. • Perforation and interior are in good condition. • No signs of cracks or structural damage. • Electrical connection and possible inspection required. • Ideal for a tool shop, metal finishing plant, or production line. Gkjdpfx Asxmlinjc Hjb Applications: • Deburring and cleaning of components after machining. • Polishing of metal or aluminum parts. • Finishing of bolts, bushings, stamped components, castings, and precision parts. Condition: used, robust, classic Walther Trowal design – suitable for light refurbishment or ready for immediate use.

Stanje: zelo dobro (rabljeno), Profesionalni knjižarski vrtalnik priznane nemške družbe Constantin Hang Maschinenfabrik Göppingen. Model 114-4 je opremljen s 4 vrtalnimi glavami, namenjenimi za natančno vrtanje papirja, dokumentacije, katalogov, koledarjev in drugih tiskarskih materialov. Stroj se uporablja v: • tiskarnah, • knjigoveznicah, • grafičnih delavnicah, • proizvodnji registratorjev in katalogov, Gkjdpfxey Nm A Rj Ac Hjb • pripravi tehnične dokumentacije. Trdna nemška konstrukcija zagotavlja visoko natančnost delovanja in dolgo življenjsko dobo. Tehnični podatki: • Proizvajalec: Constantin Hang Maschinenfabrik • Model: 114-4 • Število glav: 4 • Nastavljiv razmak glav • Nastavljiva delovna miza • Noga za upravljanje – pedal • Zaščitni pokrov • Proizvedeno v Nemčiji

Stanje: novo, Factory-new electric actuator from the renowned German manufacturer AUMA. Professional device designed for industrial automation, suitable for operating gate valves, valves, dampers, and industrial fittings. The actuator is in warehouse condition – unused. Equipped with a manual emergency handwheel and a robust industrial housing with a high IP67 ingress protection rating. Nameplate data – actuator: • Manufacturer: AUMA • Type: SAR 07.5-F10 • Comm. No.: 194452 • No.: 0402ND90010 • Protection class: IP67 • Output speed: 45 rpm • Closing torque (T Zu): 30–60 Nm • Opening torque (T Auf): 30–60 Nm • Lubrication: F1 • Operating temperature: -25°C to +60°C Nameplate data – motor: • Motor type: AD0R 63-4/80 • Article No.: Z011.859 • No.: 0402NM31789 • Supply voltage: 3~ 400V • Frequency: 50 Hz • Power: 0.37 kW • Current: Y 1.7 A • Cos φ: 0.58 • Operating mode: S4 – 25% ED 1200 cycles/h • Protection class: IP67 • Motor speed: 1400 rpm • Thermal protection: TH • Insulation class: F Application areas: • industrial automation • industrial fittings • gate valves and dampers • water supply installations • energy sector • technological systems Condition: new / warehouse stock Gkedsy Skm Espfx Ac Hjb The price refers to 1 unit.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2025, Format 4 Kappa 450 x-Motion 2-osno upravljanje, višina in nagib Tehnični podatki: - Dolžina reza: 2800 mm Gjdpfx Ajy Rp D Tsc Hskb - Širina reza: 1300 mm - Višina reza: 155 mm - Maks. premer žaginega lista: 450 mm - X-motion upravljanje - Kotna lestvica z dolžinsko kompenzacijo - Možnost odsesavanja Ø 120 mm - Moč motorja: 10 kW - Leto izdelave: 2025 Duplex kotni prislon

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Gjdpfx Acjd Tbbds Hekb Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Gkedpfx Aod Tqalec Hob Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Godpjfdkbhofx Ac Hskb Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Gkjdpofdkb Tsfx Ac Hjb Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth Gedpfx Aoguk A Hjc Hjkb - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany Gjdpfefdkb Uex Ac Hskb - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard Gksdjguk Dkopfx Ac Hjb - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Gkedpoguk Dvofx Ac Heb Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: zelo dobro (rabljeno), I am offering an industrial SEW EURODRIVE MOVIDRIVE B frequency inverter designed for controlling high-power motors in demanding industrial applications. The device is used in industrial automation, production lines, conveyors, technological machinery, and drive systems. Technical data: • Manufacturer: SEW EURODRIVE • Series: MOVIDRIVE B • Type: MDX61B0450-503-4-0T • Supply voltage: 3 × 380–500 V AC • Frequency: 50/60 Hz • Motor power: 45 kW • Output current: 89 A AC • Protection class: IP20 • Country of manufacture: Germany Applications: • Production lines • Conveyors and conveyor systems • Industrial machinery • Industrial automation systems • High-power drives Device advantages: • Smooth speed regulation of the motor • Advanced control and diagnostic functions • Built-in operator panel with display • High reliability and durability • Professional industrial-grade design Condition: • Used • Removed from an industrial installation • Normal signs of use and storage • Visual condition as per photos • Sold exactly as shown in the pictures Gjdpfx Acjzcf D Ss Hekb Includes: • SEW EURODRIVE MDX61B0450-503-4-0T inverter • Operator panel mounted on the device