Knopp Stabila-100 nakup rabljenega (24.780)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Power 3 kW Iijdpovwgt Tsfx Aa Uea Weight 50 kg This cfm industrial vacuum cleaner has only been used for wet vacuuming and is in good condition.

Stanje: rabljeno, Leto izdelave: 1985, Pressure 100 t Stroke 650 mm Throat 380 mm Ijdpjyx Ihyefx Aa Ueia Installation height 950 mm Table surface 800 x 700 mm Table height above floor 920 mm Ram surface 630 x 600 mm Speed downward 16 - 65 mm/s Speed upward 375 mm/s Working speed 0 - 16 mm/s Oil capacity 350 l Drive power 18.5 kW Weight 9.0 t Space requirement approx. 1.5 x 2.5 x 4.0 m (LxWxH) Approved for manual loading/unloading according to German accident prevention regulations (UVV) with electro-hydraulic drive, pressure/time and stroke-dependent control, adjustable speed, two-hand operation Can be offered either in its current working condition or alternatively with new Siemens S7-1500 F control.

Stanje: rabljeno, Leto izdelave: 1996, Tlak 100 t Iztegnitev 510 mm Hod 600 mm Vgradna višina 1000 mm Površina mize 1025 x 650 mm Sila izvlečnega blazine 25 t Hod izvlečnega blazine 200 mm Površina izvlečnega blazine 600 x 400 mm Višina mize nad tlemi 970 mm Površina bata 1025 x 650 mm Hitrost iztega 350 mm/sek Hitrost vračanja 330 mm/sek Delovna hitrost 30–43 mm/sek Količina olja 540 l Skupna električna moč 48,0 kW Teža stroja ca. 12,0 t Prostorske zahteve ca 1,2 x 2,7 x 3,9 m Odobreno za ročno vpenjanje v skladu s CE-normo z oljno hidravličnim pogonom, hidravlična izvlečna blazina v mizi Na voljo video dokončane ‘sestrske’ naprave – z novo krmilno enoto Iedpfx Aovuunmja Uoia

Stanje: rabljeno, Leto izdelave: 1993, Pressure: 100 t Column gap: 1900 mm Stroke: 500 mm Distance table/ram, stroke up: 800 mm Table surface: 1850 x 1000 mm Table through-hole: 160 mm Table height above floor: 850 mm Ram surface: 1850 x 800 mm Lateral column clearance: 540 mm Descent speed: from 400 mm/s Return speed: 400 mm/s Working speed: 20 - 70 m/min Oil capacity: 900 l Drive power: 34.0 kW Weight: 13.0 t Space requirements (WxDxH): 2.7 x 2.2 x 4.0 m Iiodpfevuui Djx Aa Uea Approved for manual loading/handling as per German accident prevention regulations (UVV) Equipped with oil-hydraulic drive, hydraulic stroke shock absorption, hydraulic ram locking No foundation pit required Can be offered as-is (non-operational), operational as-is, or alternatively retrofitted with new Siemens S7-1500 F control system.

Stanje: rabljeno, Leto izdelave: 1980, Pressure 100 t Stroke 20 - 200 mm Strokes per minute 20 - 60 Gap between columns 1230 mm Installation height (stroke + ram adjustment at top) 650 mm Lateral column passage 540 mm Table surface 1050 x 750 mm Table height above floor 760 mm Ram surface 1000 x 750 mm Ram adjustment 100 mm Drive power 18.0 kW Weight 20.5 t Space requirement approx. 2.8 x 1.9 x 4.3 m (LxWxH) Isdpovuk H Eofx Aa Uoia Only permitted for use with safety tooling or fixed guards in accordance with German accident prevention regulations (UVV). Features steplessly adjustable drive (PIV), pneumatic clutch/brake combination (Desch), hydraulic overload protection in the ram, semi-automatic stroke adjustment, motorized ram adjustment, pneumatic ram counterbalance, motorized oil circulation lubrication, two-hand and foot operation. As is, where is, WITHOUT commissioning.

Stanje: rabljeno, Leto izdelave: 1991, Pressure: 100 t Frame width: 770 mm Stroke: 200 mm Distance table/ram, stroke at top: 800 mm Table surface: 770 x 900 mm Table height above floor: 850 mm Cushion pressure in table: 40 t Cushion stroke in table: 200 mm Cushion surface in table: 600 x 600 mm Lateral frame opening: 600 mm Ram surface: 770 x 900 mm Downward speed: 62 mm/s Upward speed: 350 mm/s Working speed: 17.5 mm/s Iiodpfx Aovut Ufja Uea Oil capacity: 700 l Drive power: 42.0 kW Weight: 9.0 t Space requirements (WxDxH): 2.6 x 2.0 x 3.8 m Approved for manual loading/unloading in accordance with German accident prevention regulations (UVV) Equipment: with oil-hydraulic drive, pressure/time and stroke-dependent control, hydraulic cushion in table, shock absorption during cutting, depth stop, two-hand operation No foundation pit required Can be offered not commissioned, commissioned in current condition, or alternatively with a new Siemens S 7-1500 F control system – video of machine before disassembly available

Stanje: rabljeno, Leto izdelave: 1957, Tlak 100 t Izvlek 315 mm Hod 30 - 160 mm Število hodov 40 /min Razdalja med mizo in batom, velik hod zgoraj, nastavljivo zgoraj 460 mm Površina mize 910 x 680 mm Ijdpfjvzxnwjx Aa Ueia Prehodna odprtina v mizi 400 mm Višina mize nad tlemi 800 mm Prehod med stenami ohišja 400 mm Površina bata 630 x 400 mm Nastavitev bata 80 mm Pogonska moč 7,5 kW Teža 7,5 t Potrebni prostor (ŠxGxV) 1,7 x 2,0 x 3,0 m POSEBNA AKCIJA prodaja se kot stoji in leži BREZ zagona / BREZ drugih del natovorjeno na tovornjak brezplačno

Stanje: rabljeno, Leto izdelave: 1994, Tlak 100 t Razdalja med nosilci 910 mm Hod 600 mm Razdalja med mizo in batom, bat v zgornjem položaju 1000 mm Površina mize 1340 x 1085 mm Prehodna odprtina v mizi 705 x 405 mm Višina mize nad tlemi 800 mm Iisdpfx Aaevuk E Is Uoa Stranski prehod med nosilci 685 mm Površina bata 1235 x 1000 mm Vsebnost olja 450 l Izmetalna sila 7,5 t Hod izmetalca 150 mm Hitrost spuščanja 380 mm/s Hitrost dviganja 185 mm/s Delovna hitrost 28 mm/s Vsebnost olja 450 l Pogonska moč 15,0 kW Teža 9,5 t Potrebni prostor (ŠxDxV) 2,3 x 1,9 x 3,6 m POSEBNA AKCIJA kot stoji in leži, NEPREVERJENO BREZ zagona / BREZ dodatnih del Prosto naloženo na tovornjak Površina mize 1340 x 685 mm ali 910 x 1085 mm Površina bata 1235 x 685 mm ali 910 x 1000 mm

Stanje: rabljeno, Rabljen filtrirni preš za bistrenje proizvajalca Seitz Orion, tip OF 100/150, izdelan iz nerjavečega jekla. Preš ima 154 filtrirne plošče iz nerjavečega jekla z dimenzijami 1000 mm x 1000 mm in dve končni plošči. Filtracijska površina je približno 310 m2. Hidravlično zapiranje. Preš je nameščen na okvir iz nerjavečega jekla. V kompletu z napravo so dovodni priključki, manometri in lokalna nadzorna plošča. Specifikacije: Material: Nerjaveče jeklo Velikost plošč: 1000 mm x 1000 mm Število plošč: 154 filtrirnih plošč iz nerjavečega jekla Oči: 4 Tip plošč: Bistrilne Iodpfx Aoyi Eygoa Uoia Filtracijska površina: 310 m2 Zapiranje: Hidravlično

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, engine power 5.5 kW diameter of briquette 80 mm sawdust level sensor operating hours 6,363 h hopper diameter 1,200 mm adjustable feed quantity year of manufacture 1996 power supply 380 V Isdpfx Aajy Amx Ss Ueia

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, obratovalne ure: 58.000 h, Funkcionalnost: popolnoma funkcionalen, Superbly maintained injection moulding machine from a cleanroom (pharmaceutical production) - Fully operational with functionality guarantee - Equipped with GEKU SR 500 ST linear robot - Excellent cosmetic condition Technical Specifications Manufacturer: Engel Model: e-max 200/100 Serial Number: 170609 Year of Manufacture: 2008 Operating Hours: approx. 58,774 h Dimensions (L/W/H): 4.0 x 1.3 x 1.9 m Weight: 3,900 kg Functionality: fully operational Condition: excellent cleanroom Special Features Control system: CC200 Screw diameter: 25 mm Shot weight: 55 g/PS Injection pressure: 2,400 bar Injection volume: 59 cc Clamping force: 1,000 kN / 100 t Tie bar spacing: 460 x 410 mm Platen size: 650 x 600 mm Mould height: 150-450 mm Max. platen distance: 800 mm Opening stroke: 350 mm Ejector stroke / force: 100 mm / 25 kN Clamping unit: electric Connected load: 45 kW Rated current: 69 A The machine is available immediately at our warehouse in Hannover, Germany, and has been tested. Extras GEKU Robot Type: SR 500 ST Control: Simotion X-axis: 600 mm Y-axis: 1,400 mm (vertical) Z-axis: 2,500 mm (horizontal) A flip axis: SWM 45 C-axis: Servo Gripper: SWS16 B-axis: not present Warranty Warranty valid until first commissioning. Iiedpfxoubamvo Aa Usa Loading/Shipping FCA – Free loading onto buyer’s truck or delivered free to destination against freight reimbursement from our warehouse in Hannover, Germany Financing On request – hire purchase option Price: On request

Stanje: rabljeno, Stanje: rabljeno Številka zaloge: 2411 Država izvora: Kitajska Cena: 120 € Na zalogi: 1 Širina čeljusti: 100 mm Višina čeljusti: 40 mm Največja odprtina: 108 mm Teža: 13 kg Ijdpjyukc Rjfx Aa Ujia STANJE KOT NOVO Primež za vrtalni stroj (Simbolična fotografija)

Stanje: novo, Stanje: novo Iodpfx Aajyukcdj Uoia Dobavni rok: približno 2 tedna od naročila Cena: 428,36 € Širina čeljusti: 100 mm Višina čeljusti: 32 mm Maksimalna odprtina: 135 mm Teža: 13 kg [felix] 2.0 Preprosto in varno vrtanje - zahvaljujoč inovativnemu vrtalnemu primežu Felix Röwekämper. Vrtalni primež za prosto nastavljivo pritrjevanje obdelovanca. Preprosta, hitra, varna in izboljšana uporaba. Primež je z dvema potezama pritrjen na delovno mizo, natančno nastavljeno in varno pritrjen. Prizmatične čeljusti z ramensko stopnico ter horizontalnimi in vertikalnimi izrezi za širok spekter obdelovancev. Kaljena in natančno brušena vpenjalna čeljust. Dodatna vpenjalna sredstva niso več potrebna.

Stanje: novo, Leto izdelave: 2025, Stanje: novo Leto izdelave: 2025 Inventarna številka: 00774 Dobavni rok: nemudoma, vmesna prodaja možna Država izvora: Nemčija Cena: 523,41 € Na zalogi: 1 Širina čeljusti: 100 mm Višina čeljusti: 32 mm Teža: 12 kg Primež [felix] 2.0 100 Isdpfoyukbgjx Aa Usia Hitrovpenjalna vrtalna glava B18 3-16 mm (Natančnost 0,17 mm) Stožec B18/MK II Redukcijski tulec MK II/MK I

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 2.860 kg, največja dovoljena obremenitev: 7.040 kg, skupna masa: 9.900 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Central Axle Tipping Trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm ball bearing support Gear support leg at the front Foldable rear support 2 wheel chocks with holders Steel underrun protection Full-width rear mudflap (not with forklift holder) Quarter-shell mudguards Lockable storage compartment for loading ramps underneath the load bed 1 pair of ramps, 3,000 mm long, 360 mm wide, load capacity per pair 4,000 kg (ramp hooks at the rear) Central axle trailer coupling Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles & Suspension GFA or BPW axles (at manufacturer's discretion), with tapered roller bearings and S-cam brakes Axle/chassis laser aligned to reduce tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and automatic axle load equalization (rocker balance) Wheels and Tyres 235 / 75 R 17.5 as per manufacturer's choice Steel rims, factory silver Braking system 2-line compressed air braking system, color-coded lines for easier service Manual spindle parking brake Integral air reservoir ABS and ALB, with ABS socket at front, including connecting cable Note: The trailer may only be towed by trucks that ensure ABS functionality! 2 non-interchangeable coupling heads at front, incl. connecting lines to towing vehicle Electrics 24 V system, multi-chamber rear lights, side-mounted amber LED lighting 2 white front marker lights 2 white/red rear outline marker lights 2 x 7-pin non-interchangeable plugs at the front, incl. connecting cable Hydraulics Ijdpfxsi Ri Eie Aa Ueia Three-way tipping system, hydraulic multi-piston press with lift limit and safety wire Low-pressure cylinder up to max. 170 bar, no throttle (to be retrofitted to the truck if needed) Hydraulic connection with SVK plug NW 10/3, incl. hose Operated hydraulically via truck PTO Tipping Body Robust tipping body with 4 mm steel floor, steel side boards, continuous and fold-down side walls (non-swiveling), no lower central locking. Rear corner stanchions removable, rear wall fold-down and swiveling, lower central locking. Platform length approx. 4,500 mm, side walls with 5 bottom hinges Platform width 2,420 mm 5 pairs of lashing rings in the floor, each rated 5 t Operating Instructions Specified gross weight is technically possible, but due to type of cargo and compliance with permissible axle, support, and kingpin loads the maximum gross weight may not be achievable. (Poor driving and tracking behavior may occur due to improper load distribution) Registration/Country Plates Country of registration: Germany With Dekra inspection and certificate (per §13 EG-FGV) 24/7 service hotline Prepared for single-line license plate holder ECE R 048 compliant contour marking with reflective strips, white sides and red rear Paintwork Frame hot-dip galvanized including passivation, 15-year warranty against rust-through Sideboards/body RAL 9010 pure white Note: Tipping body interior is only primed unless painted version ordered! Attention: Archive photos shown. With 5 m body ALSO available IMMEDIATELY!

Stanje: rabljeno, Leto izdelave: 2019, including tools CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and milling made for you! This numerically controlled machining center comes with a comprehensive array of milling and drilling tools to meet any woodworking requirement. - Highly efficient: equipped with drilling spindles running at 8,000 rpm and the industry's most robust spindle technology, offering over 1,000 maintenance-free operating hours. Ijdpjvvi Scsfx Aa Ueia - Optimal and completely equipped: the suction cups can be individually configured on the TV FLEX worktable, allowing the machine to be tailored precisely to your needs. - Easy and intuitive programming thanks to integrated Cad-Cam MAESTRO CNC software. - User-friendly operation: the lowered machine frame provides easy access to the worktable at all times. The control cabinet and vacuum pump are integrated into the machine bed. In the PRO SPACE version, no additional protective infrastructure is required. Supporting structure The supporting frame is made from an exceptionally sturdy, monolithic steel base, heavily ribbed and extremely robust. The extra-wide support surface is specially designed to give the machine maximum stability and to ensure constant precision under all working conditions. No floor anchoring is required. The base forms a large and solid support for the moving gantry. The machining unit is equipped with a balanced, stable, and highly durable support structure that withstands heavy loads, guaranteeing top-tier performance and superior accuracy. The moving gantry is made from a single, solid piece, anchored to the base, and runs on premium prismatic rails with ball-bearing carriages. The machining unit is attached to this and moves in the Y and Z axes, also on prismatic rails with ball-bearing carriages. The movement of the lower mobile unit (X axis) and the machining unit along the gantry (Y axis) is ensured by a rack-and-pinion drive with helical gears, resulting in greater tooth engagement for increased acceleration and higher speeds along the X and Y axes. The specially designed helical gearing reduces wear on mechanical parts and enables quieter operation. The vertical Z-axis is driven by a ball screw, which ensures perfect balance under dynamic load, as well as high acceleration and deceleration speeds. The main milling unit is directly coupled to the Z-axis carriage, providing extremely fine processing quality by eliminating vibrations. The X-Y-Z axis movements are driven by brushless motors powered by static inverters, which provide: - Shorter machining times thanks to improved acceleration - Greater positioning accuracy thanks to high-resolution encoders - No setup required upon machine start-up due to absolute encoders - Elimination of general maintenance work as the brushless system has no brushes The control and management of all axes and working elements is handled via e

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 800 kN, À vendre : une presse à injection de marque Arburg, type 370 C 800-100. Caractéristiques techniques : Année de fabrication : 2007 Groupe d'injection malheureusement non disponible Force de fermeture : 800 kN Distance entre colonnes : 370 x 370 mm Ouverture maximale des plateaux : 750 mm Hauteur d'outil mini : 250 mm Unité d'injection : 100 Sur demande, transport et chargement peuvent être organisés en supplément, partout en Europe. Prix hors TVA. Iedpfsyxqiyex Aa Usia Visite possible sur rendez-vous. Contactez-nous, notre équipe se fera un plaisir de vous aider. Reprise ou échange possible ! Achat / Vente de machines ACHAT / VENTE DE MACHINES DE PRODUCTION & D’USINAGE DES MÉTAUX, ETC. Vous cherchez une machine d’usinage des métaux de qualité à prix avantageux pour votre production ? Ou vous souhaitez vendre la vôtre ? Pour plus d'informations ou pour nous contacter, consultez notre site web.

Stanje: rabljeno, Rezkalni mlin / Rezkalni mlini Proizvajalec HERBOLD Tip SMS 45/100-H5-3 Polodprt rotor z noži 5x2, 2 vrsti statičnih nožev. Stroj je opremljen z zamenljivim tretjim ležiščnim nožem (deflektorjem) za obdelavo debelostenskih materialov. Vstopni lijak za dovajanje s transportnim trakom. Rotor nameščen izven ohišja. Ohišje razdeljeno na sredini, možno odpreti z ročnim vitlom. Dvojna poševna rezila: rotor in statični noži so nameščeni drug proti drugemu in režejo kot škarje. Iodpfx Aoyyxikoa Usia Z osnovnim okvirjem vklj. z dušilci vibracij. Podatki o stroju Noži na rotorju: 5 x 2 Vrste statičnih nožev: 2 Pogon: 75 kW

Stanje: delavnici obnovljeno (rabljeno), Stock No. 2452 1 used, partially overhauled and function-tested pelletizing line Throughput up to 300 kg/h depending on material, consisting of: Kreyenborg SW 100 stuffing unit, 7.5 kW drive BKG single-screw extruder Ø 100 mm – 35 L/D, 132 kW drive – AC frequency controlled Screw speed up to 143 rpm Screw flight depth 14 mm Installed heating power approx. 35 kW 1x atmospheric degassing with melt backflow device ("Stuffer")* Screen changer, double piston Kreyenborg K-SWE 160 RS backflush with screen area 244 cm² BKG underwater pelletizer AH 300, complete with: Start-up valve incl. hydraulic station Granulator with 4 kW drive Water pump 2.2 kW By-pass system, water tank with 9 kW installed heating and heat exchanger BKG pellet centrifuge TWE 300 with 3 kW drive Control cabinet OPTIONAL at extra charge > * Vacuum pump > Pellet classifier sieve, conveying system, big bag station > Process water cooling unit / temperature control Isdsh Eyd Rjpfx Aa Usia Further pelletizing lines available ex works Wuppertal, please request our current machinery stock list or visit us.

Leto izdelave: 2000, stanje: delavnici obnovljeno (rabljeno), Stock no.: 2107 Iiodpfxsiyyc Ee Aa Usa 1 used, partially overhauled and function-tested strand pelletizer COMAC Model SG-100 SV Strand feed width: 100 mm Cutter rotor width: 110 mm Parallel-cut rotor with 32 teeth Rotor diameter: 200 mm >> Adjustable cut length for strand pellets 2 drives: 1x for cutter rotor - 4 kW 1x for feed roller - 1.5 kW with STÖBER reduction gearbox Sound-insulated granulation chamber housing Inspection / test run available soon by appointment. We also have matching strand cooling troughs, strand blowers, and classifying screens available from stock. Further strand pelletizers and other pelletizing systems/plants available from stock (water ring, hot face, and underwater pelletizing).

Stanje: delavnici obnovljeno (rabljeno), Stock No. 2452 1 used, partially overhauled and function-tested pelletizing line Throughput up to 300 kg/h depending on material, consisting of: Kreyenborg SW 100 stuffing unit, 7.5 kW drive BKG single-screw extruder Ø 100 mm – 35 L/D, 132 kW drive – AC frequency controlled Screw speed up to 143 rpm Screw flight depth 14 mm Installed heating power approx. 35 kW 1x atmospheric degassing with melt backflow device ("Stuffer")* Screen changer, double piston Kreyenborg K-SWE 160 RS backflush with screen area 244 cm² BKG underwater pelletizer AH 300, complete with: Start-up valve incl. hydraulic station Granulator with 4 kW drive Water pump 2.2 kW By-pass system, water tank with 9 kW installed heating and heat exchanger BKG pellet centrifuge TWE 300 with 3 kW drive Control cabinet OPTIONAL at extra charge > * Vacuum pump > Pellet classifier sieve, conveying system, big bag station > Process water cooling unit / temperature control Iiodji Dtb Ujpfx Aa Usa Further pelletizing lines available ex works Wuppertal, please request our current machinery stock list or visit us.

Stanje: delavnici obnovljeno (rabljeno), Stock No. 2452 1 used, partially overhauled, and function-tested pelletizing line Throughput up to 500 kg/h, depending on material, consisting of: - Kreyenborg SW 100 stuffing unit, 7.5 kW drive - BKG single-screw extruder, Ø 100 mm – 35 L/D, 132 kW drive – AC frequency controlled - Screw speed up to 143 rpm - Screw channel depth 14 mm - Installed heating capacity approx. 35 kW - 1x atmospheric degassing zone (vacuum pump available at additional cost) - Kreyenborg double-piston screen changer K-SWE 160 RS with backflush and screen area of 244 cm² - BKG underwater pelletizing system AH 300, complete with: * Start-up valve including hydraulic station * Pelletizer with 4 kW drive * Water pump 2.2 kW * By-pass system, water tank with 9 kW heater installed and heat exchanger - BKG granulate centrifuge TWE 300 with 3 kW drive Ijdpfed Sg I Isx Aa Usia - Granulate classification screen - Control cabinet with updated Siemens touch panel OPTIONAL at additional cost: > Vacuum pump > Material conveyor, Big-Bag station > Process water cooling/temperature control unit Additional pelletizing plants available ex works Wuppertal. Ask for our current machinery stock list or visit us.

Stanje: rabljeno, največja dovoljena obremenitev: 1.530 kg, skupna masa: 2.000 kg, konfiguracija osi: 2 osi, prva registracija: 01/2025, dolžina tovornega prostora: 2.760 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 1.600 mm, skupna širina: 1.565 mm, skupna višina: 1.600 mm, A65 GW26M0146957 Visokozložni prikolica, tandem os, s cerado in premium ogrodjem (notranja višina 160 cm), proizvajalec Unsinn, tip WEB H 2715-20-13, skupna dovoljena masa 2 t, s samodejno zavoro, 100 km/h Vozilo ni obnovljeno Pridržujemo si pravico do napak in vmesne prodaje. Iiedpfjyqdqaex Aa Usa

Stanje: rabljeno, največja dovoljena obremenitev: 649 kg, skupna masa: 750 kg, konfiguracija osi: 1 os, prva registracija: 03/2026, dolžina tovornega prostora: 2.100 mm, širina tovornega prostora: 1.100 mm, višina nakladalnega prostora: 650 mm, skupna širina: 1.555 mm, skupna višina: 900 mm, A63. GW26M0140819 Nizkonakladni prikolica, proizvajalec Unsinn, tip UT 2111-7-13, Skupna masa: 750 kg, odprt keson, 100 km/h Pridržujemo si pravico do sprememb in vmesne prodaje. Iedpfx Asyqdnfoa Usia

Stanje: rabljeno, največja dovoljena obremenitev: 660 kg, skupna masa: 750 kg, konfiguracija osi: 1 os, prva registracija: 01/2025, dolžina tovornega prostora: 2.011 mm, širina tovornega prostora: 1.100 mm, višina nakladalnega prostora: 1.125 mm, skupna širina: 1.510 mm, skupna višina: 1.125 mm, A64 GWN01572722 Nizkopodni priklopnik Unsinn, tip WEB T 2111-7-13, ponjava in ogrodje, notranja višina 125 cm, dovoljeno skupno maso 750 kg, 100 km/h, Iedpfx Aaoyqdmzo Usia Vozilo ni obnovljeno Pridržujemo si pravico do napak in vmesne prodaje