Hidravlična črpalka Bucher QT51-100/23-005R

Bucher QT51-100/23-005R

Stanje: dober (rabljeno), Leto izdelave: 2000, širina mize: 1.000 mm, dolžina mize: 1.800 mm, širina plošče bata: 600 mm, skupna dolžina: 25.000 mm, skupna širina: 27.000 mm, skupna višina: 47.000 mm, skupna masa: 43.000 kg, hod blazine orodja: 200 mm, Siemens Simatic OP 27 control system Iasdpfetiwgisx Aa Usr Sick light barrier Separate Rittal control cabinet Side walkways/access passages Floor-level installation

Stanje: rabljeno, Leto izdelave: 1970, številka stroja/vozila: 120895, Pressing force: 63 t Throat depth: 250 mm Stroke: 8 - 100 mm Strokes per minute: 120 s.p.m. Table: 715 x 500 mm Installation height: 330 mm Ram adjustment: 63 mm Clamping plate: 700 x 480 mm Pass-through opening in the table: 240 mm Iaedpfxsfx Hv Hs Aa Uor Pass-through opening in the clamping plate: 110 mm Ram clamping surface: 450 x 280 mm Machine weight approx.: 5.5 t Required floor space approx.: 1.2 x 1.7 x 2.7 m Single-column eccentric press in tiltable design, via hydraulic adjustment system, tiltable in 4 stages, pass-through opening to the rear (325 x 500 mm) or downward (360 x 160 mm), with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot release can be configured, operation mode selector for continuous or single stroke setup, emergency stop switch, piece counter, various accessories.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 13.209 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, širina odprtine za polnjenje: 1.050 mm, dolžina polnilne odprtine: 1.250 mm, širina bale: 1.100 mm, višina bale: 700 mm, teža bale: 500 kg, kapaciteta rezervoarja za olje: 400 l, leto zadnje generalne obnove: 2025, volumenski pretok: 108 m³/h, Technical Data – Baler: Manufacturer (according to nameplate): BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Model: HC 50 (equivalent to Presto HPK 50) Year of manufacture: 2007 Operating hours: 13,209 hours (status: March) Number of bales pressed: 23,379 pcs Pressing force: 50 t Specific press force: 650 kN/m² Feed chute dimensions: 1250 x 1050 mm (L x W) Filling volume: 0.96 m³ Theoretical cycle time: 32 seconds Theoretical throughput: 108 m³/hour Bale dimensions: 1100 x 700 mm (W x H), length variable Drive power: 15 kW Total current consumption: 50 A Tying: 4-fold vertical, fully automatic Throughput rates (by bulk density): - 30 kg/m³: approx. 3.1 t/hour - 60 kg/m³: approx. 4.5 t/hour Iaodsw U Dt Nepfx Aa Usr - 100 kg/m³: approx. 7.2 t/hour Bale weights (with bale length 1.2 m): up to 500 kg, material-dependent Hydraulic oil tank capacity: 400 L PLC: Siemens S7-200 Effective transport dimensions (excluding baler): 6780 x 1800 x 2100 mm (L x W x H) Transport weight (baler): 8.5 t Condition of the Baler: The baler was in operational use within a production environment, used exclusively for compacting cardboard, and serviced regularly. With only 13,209 operating hours, the machine has low mileage for its type. The baler has been partially overhauled and subsequently tested in our workshop. The following overhaul work was carried out: - Machine cleaned - Bale retaining claws freed and lubricated - Light barrier replaced - Twisting unit completely dismantled, all bearings and plastic sliding blocks replaced, lubricated, chain tension adjusted - Knife and counter-knife removed, sharpened, reinstalled - Knife gap newly adjusted - General maintenance and lubrication performed Scope of delivery: - 1 baler incl. wire reel boxes, without wire - 1 set of machine documentation Remarks: The complete documentation (operating instructions, CE declaration, electrical/hydraulic schematic) is available. Viewing possible by appointment. We accept no liability for the technical information or for possible errors.

Stanje: novo, Leto izdelave: 2024, Double-column press 250 tons (3000 kN) at 245 bar Stroke: 1000 mm Installation height: 1200 mm Ram plate: 1400 mm x 1200 mm Table plate: 1400 mm x 1200 mm Complete Rexroth hydraulic system Siemens PLC Approach speed: 170 mm/sec Pressing phase: 8 - 15 mm Return stroke: 150 mm Isdpfx Ajkw Rbdsa Usar Return speed: 110 mm/sec Main motor: 30 kW Sample image

Stanje: zelo dobro (rabljeno), Was installed in a Husky injection molding machine. Ijdpfx Aefci Hpja Uoar

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Reflow oven by Rehm Iasdpfx Aaeudk Ame Usr

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Reflow oven manufactured by Rehm Iaedpfx Aasudk Age Uor