Kk Kletzer Cnc Abkantpresse Kki Europa Xl 6050 Mm X 400 To, Y nakup rabljenega (113.639)

Leto izdelave: 2020, stanje: novo,

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, številka stroja/vozila: P 710, Funkcionalnost: popolnoma funkcionalen, moč: 5,5 kW (7,48 KM), kapaciteta rezervoarja za olje: 120 l, skupna masa: 6.500 kg, vrsta upravljanja: CNC krmiljenje, Machine is in like-new condition. The High Quality Press Brake (HQPB) represents the top model of Placke press brakes. The entire manufacturing process, from hydraulic cylinder to control cabinet construction, is carried out in-house. The combination of state-of-the-art technology and many years of experience in forming technology enables the HQPB series to achieve top-tier bending performance. Even the basic standard version is a fully functional press brake. This package offers safety, reliability, and efficiency, combined with intuitive operation, allowing us to meet the highest demands and precision requirements in the bending process. Machine Frame: - Base machine constructed from S 355 N steel - Side frames welded with two pressure pipes and a top-mounted oil tank - Above-floor design - Painted finish (2-component structural paint), light grey (RAL 7035) and signal grey (RAL 7004) Upper Beam: - Press beam stress-relieved annealed - Depth measurement, reading head guided via ball rail system - Separate Y1 and Y2 control, electrical deflection monitoring Hydraulic System: - Hydraulic proportional control valve system with electronically monitored cylinder synchronization - Solid steel cylinders with inductively hardened piston rods - Low-noise internal gear pump Punch Clamping: - Upper tool holder, WILA system, hydraulic clamping system, type NSCL-II-HC, fully hardened, Max. load: head-supported = 250 t/m, shoulder-supported = 300 t/m Lower Beam: - Narrow table incl. manual clamping bar, dimensions: 48 mm high, 70 mm wide - Reinforced lower beam. Due to the design, the use of mechanical crowning to compensate for deflection is not required. - Single-V die holder (13x20) - Working height: 1050 mm (with 55 mm tool height) Front of the machine: 2 aluminum support arms at the front, approx. 600 mm long, incl. 2 flip stops, tape measure, and plastic wear strip. Support arms are adjustable via a linear ball guide and can be set in height using a slot adjustment from 55 mm to 100 mm tool height. The ball guide is integrated into the lower beam. Control and Regulation Technology: - Operating voltage 400V / 3Ph / 50Hz - Switching and safety components by Telemecanique - Backgauge with AC servo technology - Pilz safety PLC Backgauge "2-axis controlled": - X and R axes CNC-controlled - Z axis manual Delem DA 66 Touch controller mounted on a swing arm. Safety equipment according to CE standard Technical data and working area: Press force 600 kN Working length 1550 mm Space between uprights 1200 mm Installation height 400 mm Throat depth 255 mm Ram stroke 215 mm Ram speeds: Rapid traverse max. 280 mm/s Pressing speed max. 9.8 mm/s Return speed max. 170 mm/s Ram positioning accuracy ± 0.01 mm Ram tilt ± 10 mm Electronically limited to ± 5 mm Height of lower beam above floor 947 mm Motor power 5.5 kW Main dimensions: Depth below floor 0 mm Side frame pit depth 0 mm Machine weight approx. 6.5 t Tank capacity (hydraulic oil) 120 l (Technical specifications subject to change) Rear machine lighting: Bsdpfxoyvzkio Agtolg Work area illuminated by LED light strip between the uprights.

Stanje: zelo dobro (rabljeno), Rubber protective mats, conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt Bsdpfx Asit Rl Njgtjlg - Manufacturer: Forbo Siegling, endless conveyor belt with Z-splice - Width: 400 mm - Length: 4280 mm - Thickness: mm - Quantity: 1x conveyor belt available - Price: per piece - Transport dimensions: 440/290/H260 mm - Weight: 5.7 kg/pc.

Stanje: rabljeno, Leto izdelave: 2009, x-travel: 4000 mm y-travel: 2000 mm z-travel: 600 mm Dimensions (LxWxH): 6,400 x 3,200 x 3,100 mm Weight approx.: 10,500 kg Bjdewiatijpfx Agtolg Waterjet Cutting Machine Stein-Moser GmbH CNC 5 Axis 4020 x 2020 x 600 mm Technical Data: - Working area X, Y (2D): 4,020 x 2,020 mm - Support surface X, Y: 4,400 x 2,400 mm - Z-axis: 600 mm - Swivel range A, B: +/- 46° - Rotary axis C, 360° rotatable: +/- 3600° - Positioning speed: 10 m/min - Repeatability: +/- 0.1 mm - Pneumatic connection: min. 6.5 bar - Water connection: 2 – 5 bar - Machine dimensions (LxWxH): 6,400 x 3,200 x 3,100 mm - Weight (with water): approx. 10,500 kg - Operating temperature: +10°C to +40°C - Max. operating pressure (high pressure waterjet): 4,000 bar A video of the waterjet system can be provided on request. Original price approx. EUR 300,000,-- for the waterjet system Sale incl. abrasive sand EUR 28,000.-- Series: WS2040HB/090601 Type: WS 2040 HB Tank 4.2 PC cabinet (Rittal) with wheels and cooling unit, equipped with: servo control, TYM NUM AXIUM POWER, NUM MDLU 3 drive system, control PC, monitor, splash-proof keyboard and mouse, hand-held operator device for manual machine operation - Connection values: 400 V AC, 16 A - Control voltage: 24 V DC Servo control NUM AXIUM POWER: - Central unit for CNC, PLC, and communications - Decentralized I/O modules with 32/32 digital inputs/outputs via fiber optic Drive system MDLU 3: - Fully digital, compact, integrated power supply - Integrated position, speed, and current control - Brushless digital servo motors - High-resolution measuring system via integrated SinCos encoder - Nominal motor power: 2 kW CAD/CAM software: Complete package for creating or importing drawings, setting process-specific waterjet parameters, and controlling the machine. - Direct machine control - 32-bit Windows software - Automatic approach strategies - Automatic correction sequence - Freely selectable cutting direction for each contour - Jet correction - Material database - Visual cut control - HPGL and DXF import - Automatic piercing

Stanje: dober (rabljeno), Leto izdelave: 2010, Abkant stiskalnica, upognitvena klop, upogibni stroj, nihajna upogibna stiskalnica, stiskalnica za upogibanje z matricami -Stroj: lahko si ga ogledate pod napetostjo -CNC abkant stiskalnica: s 3 osmi in laserskim varnostnim sistemom -Delovna širina: 3200 mm Bsdpfxsxxz E Ne Agtslg -Tlačna sila: 125 t -Maks. hod upognitvene grede: 160 mm -Razdalja med stebri: 2700 mm -Hod zadnjega prislona: 590 mm -Zadnji prislon: 2 elektronsko vodeni osi, 1 os ročno -Dodatna oprema: glej slike -Postavitvene mere: 2140/5195/H2530 mm -Transportne mere: 1680/5195/H2530 mm -Teža: 9300 kg

Stanje: dober (rabljeno), Ventilator za odsesavanje prahu, odsesavanje izpušnih plinov, odsesavanje varilnega dima, odsesavanje, ventilator, tlačni puhalnik, vakuumski puhalnik, radialni ventilator, prezračevalno puhalo, radialno puhalo, puhalnik, ventilator Bljdpfx Agex Exnwjtjg -Ventilator: puhalnik/radialni ventilator, dvojna izvedba brez pogona -Ventilatorsko kolo: 2x Ø 400 x 380 mm -Dolžina osi: pribl. 1230 mm -Moč motorja: predvidena za 0,55 do 7,5 kW -Pogonska os: Ø 30 mm, dvokanalna klinasta jermenica Ø 235 mm, glej slike -Količina: na voljo 2 puhalnika -Cena: na kos -Mere: 1470/600/H690 mm -Teža: 65 kg/kos

Leto izdelave: 2002, stanje: zelo dobro (rabljeno), Technical specifications: Working width: 3550 mm Max. bending capacity: 42.0 mm Max. prebending: 35.0 mm CNC control system Upper roller diameter: 480 mm Second upper roller diameter: 540 mm Diameter of lateral side rollers: 480 mm Diameter of central lower roller: 480 mm Conical bending device by angular adjustment of both side rollers Mobile control panel with digital display Hydraulic drop end bearing Net weight: approx. 44 tonnes Additional equipment: Lateral bending aid Swing-away upper bending aid Blodpoittzfofx Agtjg Additional upper roller The seller assumes no liability for typing or data transmission errors. The machine’s appearance, technology, and wear are consistent with its age; used machines are sold without any guarantee.

Stanje: rabljeno, Rabljena nerjaveča vertikalna mešalna posoda proizvajalca FIB Industriele Bedrijuen BV, približno 106 litrov. Posoda ima privijačen prirubni pokrov in varjeno zaobljeno dno. Dimenzije so približno 400 mm premera x 400 mm ravne višine. Notranja zasnova pritiska: 3 bar/polni vakuum pri 135 °C. Opremljena je z mešalom iz nerjavečega jekla, v obliki diska, z vstopom od spodaj, poganja ga Jongia model LEM30 s 1,5 kW motorjem ter Siemens reduktorjem z razmerjem 2,05/1. Posoda je postavljena v okvir iz nerjavečega jekla. Specifikacije: Kapaciteta: 28 gal Premer: 1,31’ Višina: 1,31’ Vrsta nerjavečega jekla: ni navedeno Tip glave: privijačen prirubni pokrov in varjeno zaobljeno dno Postavitev: vertikalna Nogice/Nasloni/Ovitek: postavljeno v okvir iz nerjavečega jekla Dimenzije: 400mm x 400mm Bedpfx Agsyh Ncaotelg

Stanje: zelo dobro (rabljeno), 3-axis (X-Y-Z) CNC-controlled "FLEXIBLE" MACHINING CENTER Moving table (workpiece), stationary operating head – Horizontal table (workpiece) Control unit: PowerControl (woodWOP software) Operator head safety enclosure 2x safety interlock workpiece clamping chucks in the working area WEEKE pre-positioning unit – for faster positioning of workpieces in machines with clamp grippers. Blodpfx Agolkdpmstog Support table (workpiece support) at infeed – outfeed table (with conveyor belt) Includes automatic panel pusher Minimum workpiece dimensions (X-Y-Z) mm: 200 x 70 x 8 (2 x 4 mm) Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1000 (option 1300) x 80 (2 x 40 mm) Two workpieces can be machined simultaneously (in the Z-axis) Separate electrical and control cabinet UPPER MACHINING UNITS: 2V32, 2H8X/Y2, N2 X-Y90, F2-ETP-6 kW 23 independent vertical drilling spindles (drill head output 2.3 kW) 5 independent horizontal drilling spindles (4 in X + 1 in Y) 1 grooving saw unit (swivels 90° in X-Y direction), blade diameter 125 mm 1 vertical main spindle (milling unit) ETP (vertical main spindle output 6 kW) LOWER MACHINING UNITS: 23 independent vertical drilling spindles (drill head output 2.3 kW) 5 independent horizontal drilling spindles (4 in X + 1 in Y) 1 grooving saw unit (swivels 90° in X-Y direction), blade diameter 125 mm 1 vertical main spindle (milling unit) ETP (vertical main spindle output 6 kW)

Stanje: zelo dobro (rabljeno), 3-axis (X-Y-Z) CNC MACHINING CENTER Movable panel (workpiece), movable working head – Vertical panel (workpiece) Control: TPA – Software: Albatros Safety enclosure for working head Workpiece drive with transport chain Rubber rollers for securing the workpiece during feed and operation Infeed table (with conveyor belt) – Outfeed table (with conveyor belt) With workpiece return system to operator (180°) Minimum working area (X - Y - Z) mm: approx. 260 x 40 x 10 Maximum working area (X - Y - Z) mm: infinite x 1300 x 80 (approx.) Separate electrical and control cabinet Total connected load (kW): 35 WORKING UNITS: Drilling aggregate with vertical spindles: 1 unit Independent vertical drilling spindles: 24 (7 in X + 17 in Y) Drilling aggregate with horizontal spindles: 2 units Independent horizontal drilling spindles: 36 (9+9 = 18 x 2) Drilling head motor power (kW): 3 x 3 (approx.) Vertical main spindle (milling unit): 1 unit Power vertical main spindle (kW): 7.5 (approx.) Blsdpoihfiijfx Agtog Automatic tool changer – Revolver type, magazine positions: 10 tool slots

Stanje: dober (rabljeno), Tehnični podatki: Delovna dolžina: 6040 mm Kapaciteta upogibanja jekla: 2,0 mm NC upravljanje Nastavitev kota upogiba: 0 – 180° Odprtina zgornje čeljusti: 500 mm Dimenzije (d x š x v): pribl. 8300 x 1350 x 2000 mm Teža: pribl. 11 t Dodatki: različna deljena orodja izhodna miza zadaj Prodajalec ne odgovarja za napake pri pisanju ali prenosu podatkov. Stroj je po videzu, tehniki in obrabi skladno s starostjo; rabljeni stroji se prodajajo brez kakršnekoli garancije. Bodpfx Agjyiaucetslg

Stanje: zelo dobro (rabljeno), Technical data for the shelving rack: Shelving system: Dexion Type: HI280 Technical data for the assembly: Number of rack rows: 01 pc. Rack length: 820 mm Number of bays per rack row: 01 pc. Number of shelves: 05 pcs. Included in delivery: 02x rack uprights, new II. choice Material colour: Sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment grid: 25 mm Incl. cross bracing and base plates Uprights pre-assembled 2,100 mm high 400 mm deep 05x shelves, used Material colour: Sendzimir galvanized Dimensions: 750 x 375 x 30 mm 05x shelf beams, used Material colour: Sendzimir galvanized Clear width: approx. 750 mm Z-profile: 50 x 25 mm Number of hooks: 02 pcs. 04x leveling plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material colour: Sendzimir galvanized 01x load sign with details on bay and shelf load limits, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Bjdpfx Agetrwa Netelg Mr. Falk Deutsch General information about the item: This item is only offered for collection. Transport or shipping of this item beyond collection is subject to additional costs, which can be queried with us depending on the place of delivery and scope of supply.

Stanje: kot nova (razstavni stroj), Technical Specifications for the Shelf Rack Upright: Racking System: Dexion Bodpfxotrmfwo Agtslg Type: HI280 Scope of Delivery Includes: 01x Shelf Rack Upright, New Item, Grade II Material color: Sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment pitch: 25 mm Incl. cross brace and base plates Uprights are supplied unassembled Height: 2,100 mm Depth: 400 mm Note: The shelf rack uprights are delivered unassembled for orders. For an additional charge of €5.00 per piece plus VAT, we can supply the uprights pre-assembled. This is new, unused Grade II stock. New, Grade II means there may be dust deposits or minor soiling present. Currently available in stock: 30 pcs. Contact persons at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipping of this item will incur extra costs, which we can provide upon request depending on the delivery location and scope.

Stanje: skoraj kot novo (rabljeno), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Scope of delivery includes: 01x Stackable Box, Grade II Manufacturer: SSI Schäfer Type: Traka 14-6 Bljdjhm Sllspfx Agteg Material: Metal Finish: RAL 5002, ultramarine blue Dimensions: 600x400x120 mm Weight: approx. 2.84 kg Additional data / information: Hole pattern: 117 Bottom + all four side walls with offset round perforations Round hole Ø: approx. 12 mm Spacing: approx. 14 mm center to center - With hand grip openings on both end faces - With beaded rim Please note: These are Grade II stackable boxes. Scratches, soiling or color defects may be present. General information about the item: This item is only available for collection. If transport or shipping is required, additional costs will apply, which can be provided separately depending on the delivery location and scope. Our service overview: (Prices on request) Installation, Assembly Our general installation conditions apply Racking inspection Racking inspection according to DIN EN 15635, performed according to the requirements of BGR 234 – visual inspection for all racking systems Delivery with our own fleet (without unloading)

Stanje: dober (rabljeno), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Scope of delivery includes: 80x stackable containers, grade II Manufacturer: SSI Schäfer Model: Traka 14-6 Material: Metal Finish: RAL 5002, ultramarine blue Dimensions: 600x400x120 mm Weight: approx. 2.84 kg Further data/information: Perforation pattern: 117 Base and all four side walls with offset circular perforations Bsdpfxohm Sltj Agtelg Hole diameter: approx. 12 mm Hole spacing (center-to-center): approx. 14 mm - With hand grips on both short sides - With folded rim Please note: These are grade II stackable containers. Scratches, soiling, or color defects may be present. General information about the item: This item is only available for collection. Delivery or shipping can be arranged at additional cost, which can be quoted upon request depending on the delivery location and scope. Our range of services at a glance: (Prices on request) Assembly and installation Our general assembly conditions apply. Racking inspection Racking inspection according to DIN EN 15635, performed in compliance with BGR 234 visual inspection requirements for all racking systems Delivery with our own fleet (without unloading)

Stanje: dober (rabljeno), Your contacts at our company: Bjdpfx Agehm Slpotslg Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Scope of delivery: 05x stackable bins, second choice Manufacturer: SSI Schäfer Type: Traka 14-6 Material: Metal Surface: RAL 5002, ultramarine blue Dimensions: 600x400x120 mm Weight: approx. 2.840 kg Further data / information: Hole pattern: 117 Base and all 4 side walls with offset round perforations Hole diameter: approx. 12 mm Distance: approx. 14 mm center-to-center - with through-grip handles on both front sides - with crimped edge Please note: These are second-choice stackable bins. Scratches, soiling, or color defects may be present. General information about the item: This item is available for collection only. If transport or shipping is required, it will incur additional costs, which can be provided upon request depending on the delivery location and quantity. Overview of our services: (prices on request) Assembly, installation Please note our general assembly conditions. Racking inspection Racking inspection according to DIN EN 15635, executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (unloading not included)

Stanje: dober (rabljeno), Included in the scope of delivery: 01x Open front storage bin, used Manufacturer: Bito External dimensions: 600 x 400 x 170 mm Internal dimensions: 560 x 360 x 167 mm Opening dimensions: front half-side open, 275 x 82 mm (W x H) Handle: yes, single-sided, open Colour: blue Weight per unit: 1.59 kg Blsdow E D Iijpfx Agtsg General information about the item: This item is only offered for collection. If transport or shipping of this item is required, additional costs will apply. The exact charges can be provided upon request, depending on delivery location and quantity.

Stanje: pripravljen za uporabo (rabljen), easyLINE 2-osni sistem X-os: 140 mm Y-os: 120 mm, s priključnimi kabli, rabljen, z manjšimi sledmi uporabe, 100% delujoč Bodpfoi D Uqlex Agtelg

Stanje: rabljeno, Granitni marmor ATELIERS MAITRE Dolžina: 2000 mm Širina: 1200 mm Bljdpfexxlnuox Agtjg Debelina: 400 mm Višina na nogah: 910 mm Razred 2 Teža: pribl. 2 t

Stanje: rabljeno, Lito železna kotna plošča Bjdpfxexm Sgye Agtelg Širina: 640 mm Višina: 400 mm Globina: 320 mm Dimenzije utorov: 100 x 24 mm Teža: 110 kg

Stanje: novo, Working length 2000 mm Working width 400 mm Roller width 400 mm Roller diameter 60 mm Number of rollers 8 pcs. Working height 810 - 910 mm - straight design Bljdsp S Ddbjpfx Agtog - light version - insert shelves - bucket holder

Stanje: novo, Working length: 3000 mm Working width: 400 mm Roller width: 400 mm Bodpfop S Ddfjx Agtslg Roller diameter: 60 mm Number of rollers: 12 pcs. Working height: 810 - 910 mm - straight design - lightweight version - shelves - bucket holder

Stanje: dober (rabljeno), Tubular heater, heating band, heating jacket, mica heater, cylinder heater, heated cylinder, ceramic heating band - Manufacturer: Erge, heating band/heating jacket - Type: Ø100 x 22 mm - No.: 832 597 65 - Heating power: 400 W - Voltage: 220 V - Quantity: 3x heating bands available - Price: per piece - Dimensions: 250/160/H60 mm - Weight: 0.3 kg/pc. Bedjlw Azijpfx Agtslg

Stanje: dober (rabljeno), Clamping plate with T-slots and cross table, platen field, welding table, plate drilling machine, T-slot plate, pallet changer, pallet changing system - Clamping plate: with T-slots and clamping devices, removed from a CNC machining center - Width: 500 mm - Length: 400 mm - Slot width: 14 mm Blsdpfx Ageg R Tfustog - Slot pitch: 65 mm - Dimensions: see technical drawing in the photos - Clamping devices: see photos - Overall dimensions: 400/500/H315 mm - Weight: 111 kg

Stanje: dober (rabljeno), Clamping plate with T-slots and cross table, plate field, welding table, plate-type boring machine, T-slot plate, pallet changer, pallet change system Bodpfx Ageg Si I Istolg - Clamping plate: with T-slots and clamping devices, taken from a CNC machining center - Width: 500 mm - Length: 400 mm - Slot width: 14 mm - Slot spacing: 65 mm - Dimensions: see technical drawing in the photos - Clamping devices: see photos - Total dimensions: 400/500/H310 mm - Weight: 86 kg