Hesse By Isitan Sfc 315-V nakup rabljenega (73.315)

Stanje: novo, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €28,450 Leasing rate: €543.40 Bending length: 1,550 mm Max. bending capacity – construction steel: 7 mm Max. sheet thickness without pre-bending at D=5x top roller: 7 mm Max. sheet thickness without pre-bending at D=1.5x top roller: 4.5 mm Max. sheet thickness with pre-bending at D=5x top roller: 4.5 mm Max. sheet thickness with pre-bending at D=1.5x top roller: 3.5 mm Top roller diameter: 150 mm Bottom roller diameter: 150 mm Side roller diameter: 130 mm Rolling speed: 1.5 / 6 m/min Motor power: 4 kW Length: 3,750 mm Width: 960 mm Height: 1,100 mm Weight: 2,500 kg Hjdpfx Aoyb Szhjl Dju 4 rollers Top roller driven by hydraulic motor and planetary gearbox, lower rollers driven by gear and cardan shaft Hydraulic adjustment of lower and side rollers Digital display for lower and side roller positions Hardened rollers Cone bending device Hydraulic release of top roller Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE directive OPTIONS: (Delivery time with options approx. 10 weeks) Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: Maximum sheet thickness is 50% of rated capacity Cone length must be max. 30% or more than 60% of roller length Hardened rollers are recommended

Stanje: novo, Condition: New Delivery time: approx. 14 - 16 weeks from order Country of origin: Turkey Price: €29,800 Leasing rate: €569.18 Saw frame: double-column guide Saw blade dimensions: 5400 x 41 x 1.3 mm Infinitely variable blade speed: 20–100 m/min Cutting capacity at 0° round: 450 mm Cutting capacity at 0° square: 425 mm Cutting capacity at 0° flat: 695 x 425 mm Cutting capacity at 45° round: 430 mm, square: 425 mm Cutting capacity at 60° round: 320 mm, square: 290 mm Working height: 690 mm Hydraulic motor: 0.55 kW Drive motor: 4 kW Coolant pump motor: 0.12 kW Length: 3,090 mm Width: 1,200 mm Height: 1,940 mm Weight: 1,630 kg Hjdpfx Aewiq Iqjl Dou Double linear guideways Hydraulic-mechanical blade tensioning Chip brush Continuously adjustable cutting speed Sensitive feed control Hydraulic vice Bi-metal saw blade 41 Coolant system Thermal overload protection Heavy-duty gearbox Optical height adjustment 3° inclined blade Operating manual in GERMAN or ENGLISH OPTIONS: - Hydraulic vertical clamping - Minimum quantity lubrication - Chip conveyor - Cutting line laser

Stanje: novo, Leto izdelave: 2025, Stanje: novo Leto izdelave: 2025 Številka zaloge: 090086 Dobavni rok: takoj, možnost vmesne prodaje Država porekla: Turčija Hsdpfxewiqmme Al Dju Cena: 7.400 € Leasing obrok: 142,82 € Na zalogi: 1 Dolžina rezila: 197 mm Debelina pločevine (420 N/mm²): 4 mm Debelina pločevine (600 N/mm²): 2 mm Število hodov: 20 1/min Kot: 90° Motor: 4 kW Dolžina: 890 mm Širina: 780 mm Višina: 1.115 mm Teža: 550 kg Hidravlični pogon Samodejna prilagoditev reže reza 2 pritisna elementa 2 kotno nastavljiva prislona Zaščita iz pleksi stekla Nožno stikalo Posoda za odpadke Oprema po smernicah "CE" Navodila za uporabo v nemščini in angleščini

Stanje: novo, Stanje: novo Dobavni rok: približno 14–16 tednov od naročila Država izvora: Turčija Cena: 97.600 € Mesečni obrok lizinga: 1.844,64 € Sila stiskanja: 160 to Nominalna sila stiskanja pri 6 mm Dolžina mize: 750 mm Širina mize: 1100 mm Premer luknje v mizi: 230 mm Hod: 1–172 mm Število hodov: 45 1/min Število vodil za bat: 6 Nastavitev bata: 100 mm Premer luknje v batu: 80 mm Izvis: 375 mm Višina vgradnje: 540 mm Motor: 11 kW Dolžina: 1890 mm Širina: 1950 mm Višina: 3650 mm Teža: 15.500 kg Varjena jeklena okvirna konstrukcija 8-kanalno vodilo za bat Pnevmatska kombinacija sklopke in zavore Zaščitno ohišje z optičnimi senzorji in stranskimi vrati Hidravlična zaščita pred preobremenitvijo Dvojna upravljanje z ročnimi in nožnimi pedali Ročna nastavitev hoda Motorizirana nastavitev bata Nastavljivo število hodov preko frekvenčnega spreminjalnika Načini delovanja: Način nastavitve Sprožitev z obema rokama Sprožitev z nogo Delovanje v dveh taktnih načinih preko optičnih senzorjev Neprekinjeno delovanje Hedpewiqu Rofx Al Deu Na dotik občutljiv zaslon za: Števec hodov z možnostjo prednastavitve za neprekinjeno delovanje Nastavitev števila hodov Intervali in trajanje mazanja Alarmna sporočila Smer vrtenja motorja Nadzor vhodov in izhodov 2 prosti gredi za priključitev periferije Avtomatsko centralno mazanje Oprema v skladu s standardi CE Simbolične fotografije, prikaz vključuje dodatno opremo, ki je na voljo MOŽNOSTI: Vibracijske blazinice 192,00 € Napetna plošča Po dogovoru Hidravlična zaščita pred preobremenitvijo Po dogovoru itd.

Stanje: novo, Stanje: novo Dobavni rok: približno 14–16 tednov od naročila Država izvora: Turčija Cena: 61.200 € Mesečni leasing: 1.156,68 € Sila stiskanja: 80 to Nominalna sila stiskanja pri 4 mm Dolžina mize: 600 mm Širina mize: 900 mm Prehodna luknja v mizi: 200 mm Hod: 1–110 mm Število hodov: 60 1/min Število vodil za bat: 6 Nastavitev bata: 80 mm Luknja za čep v batu: 50 mm Izmet: 300 mm Višina vgradnje: 400 mm Motor: 7,5 kW Dolžina: 1600 mm Širina: 1500 mm Višina: 2750 mm Teža: 5700 kg Varjena konstrukcija jeklenega okvirja 8-kratna vodila za bat Pnevmatična kombinacija sklopke in zavore Zaščitno ohišje z optičnimi senzorji in stranskimi vrati Hidravlična zaščita pred preobremenitvijo Dvojna upravljalna enota za ročno in nožno pedalo Ročna nastavitev hoda Motorizirana nastavitev bata Spremenljivo število hodov prek frekvenčnega pretvornika Načini delovanja: * Način nastavitve * Sprostitev z obema rokama * Sprostitev z nogo * 2-taktni način delovanja prek optičnih senzorjev * Neprekinjeno delovanje Na dotik občutljiv zaslon za: * Števec hodov z možnostjo prednastavitve za neprekinjeno delovanje * Nastavitev števila hodov * Intervali in trajanje mazanja * Alarmi * Smer vrtenja motorja * Nadzor vhodov in izhodov 2 prosta greda za priključitev periferije Avtomatsko centralno mazanje Oprema v skladu s predpisi CE (Simbolične fotografije) MOŽNOSTI: Vibracijski blažilniki Hodpfx Alswiq I Do Dju 192,00 € Namizna plošča Po dogovoru Hidravlična zaščita pred preobremenitvijo Po dogovoru itd.

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €40,900 Leasing rate: €781.19 Bending length: 2050 mm Max. bending capacity – mild steel: 10 mm Max. plate thickness without pre-bending (at D = 5x top roll): 10 mm Max. plate thickness without pre-bending (at D = 1.5x top roll): 8 mm Max. plate thickness with pre-bending (at D = 5x top roll): 8 mm Max. plate thickness with pre-bending (at D = 1.5x top roll): 6 mm Top roll diameter: 200 – 220 mm Lower roll diameter: 200 – 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Hsdpfx Asynmyfel Deu Length: 4400 mm Width: 1150 mm Height: 1250 mm Weight: 3950 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, lower roll driven by gears and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONE BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length may be a maximum of 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 4 months from order Country of origin: Turkey Price: €34,400 Leasing rate: €657.04 Saw frame: double column guide Saw blade dimensions: 6000 x 41 x 1.3 mm Blade speed: infinitely variable, 20–100 m/min Cutting capacity 0° round: 540 mm Cutting capacity 0° square: 540 mm Cutting capacity 0° flat: 750 x 540 mm Cutting capacity 45° round: 510 mm, square: 450 mm Cutting capacity 60° round: 270 mm, square: 250 mm Working height: 695 mm Motor: 4 kW Coolant pump motor: 0.12 kW Length: 3000 mm Width: 1300 mm Height: 2150 mm Hjdpfxewiqxvj Al Dou Weight: 2,445 kg Hydraulic vice Digital display for mitre angle Hydraulic clamping of the saw arm Manual saw arm rotation Steplessly adjustable saw arm descent speed Automatic saw frame lift after cutting Sensitive cutting pressure control depending on material properties Hydromechanical blade tension, readable via manometer Mobile control panel Helically geared, conical heavy-duty gearbox Powered chip brush Blade guide via carbide plates and rollers Automatic blade breakage protection Coolant system Hydraulic lifting of the saw frame 3° inclined saw blade Operating manual in GERMAN or ENGLISH (the hydraulic vertical clamping shown in the photo is optional) OPTIONS: Roller conveyors and saw blades available on request

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €88,113 Leasing rate: €1,665.34 Pressing force: 220 t Bending length: 3,050 mm Axes: Y1 / Y2 / X axis Stroke: 265 mm Distance between uprights: 2,600 mm Throat depth: 450 mm (side frame) Installation height: 530 mm Drive system: hydraulic Rapid traverse Y-axis: 140 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 140 mm/s Hodpfx Alewiqude Dou Backgauge speed X-axis: 500 mm/s Backgauge speed R-axis: 350 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 104 mm Oil tank: 250 l Motor power: 22 kW Length: 4,250 mm Width: 1,770 mm Height: 3,000 mm Weight: 12,600 kg Standard equipment: – 3 axes (Y1, Y2, X) – CNC control DT-15 - 2D graphic display 15” - Intuitive touch-screen operation (easy drawing of bending contour with finger) - User-friendly dialog-based programming - Automatic bending sequence calculation - Automatic calculation of developed length for sheet cutting - Graphic product and tool memory - Correction options - USB ports for backup and program transfer - PC software allowing programs to be written on PC and then transferred to the machine via USB – Servo-driven backgauge on linear guides and ballscrews – Backgauge finger blocks on double linear guides – CNC-controlled crowning – Upper tool 1010/A/75°, segmented and offset – 4-V die block 60x60 2009 (V = 16, 22, 35, and 50 mm) – Laser safety device Fiessler AKAS mounted on upper beam – Sheet support arms on linear guides – Equipment according to CE directives – Oil filling – Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE AD-S SERIES: – Greater stroke, installation height, and throat depth – Higher approach and return speeds of the upper beam – Increased backgauge speed – Backgauge fingers mounted on double, not single, linear guides – More available options, e.g., additional backgauge axes (such as Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measurement system, tandem configuration, alternative CNC controls, etc. OPTIONS: – R-axis – R/Z1/Z2 axes – CNC control Delem DA66 S – CNC control DELEM DA-69S 3D incl. PC software Profile-S with import function for 3D files – Hydraulic or pneumatic tool clamping for Euro or Wila tooling

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €102,300 Leasing rate: €1,933.47 Pressing force: 80 tons Bending length: 2,550 mm Axes: 4 Stroke: 320 mm Distance between uprights: 2,840 mm Installation height: 500 mm Drive concept: servo-motorized belt drive Rapid traverse Y-axis: 105 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 105 mm/s Back gauge travel X-axis: 650 mm Back gauge travel R-axis: 250 mm Length: 3,700 mm Width: 2,200 mm Height: 2,550 mm Weight: 6,400 kg Servo-motorized drive Power transmission via multi-guided flat belt 4 axes (Y1, Y2, X, R) CNC control DELEM DA-66S - 17" 2D graphics display - 3D visualization in simulation and production - Intuitive touch screen operation (easy drawing of bending contours with finger) - Simple and convenient data transfer - Multi-simulation capability - User-friendly dialog programming - Graphical simulation of bending process Servo-driven back gauge with linear guides and ball screws Back gauge finger blocks with double linear guides Intermediates for upper tool clamping Upper tool 1010/A/75°/0.8/105, segmented, bending radius hardened and ground Die holder for 60 mm dies Die 2009/85° (V 16, 22, 35, 50 mm), segmented, entry radii hardened and ground BLVT light barrier safety system Sheet support arms with linear guides Side and rear safety barriers Equipment in accordance with CE regulations Operating instructions in GERMAN or ENGLISH Advantages of this design: - No reduction of working width due to side frames, distance between uprights is larger than the bending length - Up to 30% higher productivity versus conventional hydraulic press brakes due to almost instantaneous pedal signal response - Minimal frame deflection Hsdpjynndfefx Al Dou - No crowning system required as bending force is applied over many points along bending length - High repeatability and bending accuracy throughout entire bending length - Low energy consumption - No hydraulic components Options: CNC control DELEM DA-69S 3D including PC software Profile-S with 3D file import capability

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €32,480 Leasing rate: €620.37 Bending length: 1,550 mm Max. bending capacity - structural steel: 9 mm Max. plate thickness without pre-bending at D=5x upper roll: 9 mm Hedpfjynmzpox Al Dju Max. plate thickness without pre-bending at D=1.5x upper roll: 7 mm Max. plate thickness with pre-bending at D=5x upper roll: 7 mm Max. plate thickness with pre-bending at D=1.5x upper roll: 5 mm Upper roll diameter: 180 mm Lower roll diameter: 180 mm Side roll diameter: 150 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 3,250 kg 4 rolls Top roll drive by hydraulic motor and planetary gearbox, lower roll drive via gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The maximum plate thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 4 months from order Country of origin: Turkey Price: €82,900 Leasing rate: €1,566.81 Saw frame: double column guide Saw blade dimensions: 8400 x 54 x 1.6 mm Infinitely variable blade speed: 20–100 m/min Cutting capacity 0° round: 650 mm Cutting capacity 0° flat: 1000 x 600 mm Cutting capacity 45° rectangular: 660 x 600 mm Cutting capacity 60° rectangular: 440 x 600 mm Cutting capacity -45° rectangular: 660 x 600 mm Working height: 880 mm Hydraulic motor: 4 kW Main motor: 7.5 kW Coolant pump motor: 0.12 kW Length: 4400 mm Width: 2270 mm Height: 2660 mm Weight: 6520 kg Hydraulic vice Digital display for angle indication Hydraulic clamping of the saw arm Manual saw arm rotation Infinitely adjustable lowering speed of saw arm Automatic saw frame lift after cut completion Sensitive cutting pressure regulation depending on material properties Hjdpfxoynm N Te Al Dsu Hydromechanical blade tension, readable via manometer Mobile control panel Helical bevel heavy-duty gearbox Powered chip brush Blade guide with carbide plates and rollers Automatic blade breakage detection Coolant system HYDRAULIC SAW FRAME LIFTING Operating manual in GERMAN or ENGLISH

Stanje: novo, Condition: new Delivery time: approx. 14 - 16 weeks from order Country of origin: Turkey Price: €48,500 Leasing rate: €926.35 Press force: 60 tons Nominal press force at 3.5 mm Table length: 500 mm Table width: 700 mm Through-hole in table: 190 mm Stroke: 1 - 100 mm Strokes per minute: 65 Ram guides: 4 Ram adjustment: 70 mm Ram bore: 45 mm Throat depth: 260 mm Installation height: 340 mm Motor: 5.5 kW Length: 1250 mm Width: 1350 mm Height: 2400 mm Weight: 3500 kg Welded steel frame construction 4-fold ram guidance Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Manual ram adjustment Hjdswwwtiepfx Al Dou Operating modes: * Setup mode * Two-hand release * Foot release * 2-cycle operation via light barriers * Continuous operation automatic central lubrication Equipment according to CE regulations OPTIONS: Vibration pads Clamping plate

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks ex works Country of origin: Turkey Price: €134,000 Leasing rate: €2,532.60 Bending length: 3,100 mm Max. bending capacity (mild steel): 25 mm Max. plate thickness without prebending at D = 5x top roll: 25 mm Max. plate thickness without prebending at D = 3x top roll: 20 mm Max. plate thickness without prebending at D = 1.5x top roll: 20 mm Max. plate thickness with prebending at D = 5x top roll: 20 mm Max. plate thickness with prebending at D = 1.5x top roll: 16 mm Top roll diameter: 360 mm Lower roll diameter: 360 mm Side roll diameter: 270 mm Max. opening: 60 mm Working height: 1,510 mm Motor power: 22 kW Length: 5,560 mm Width: 2,060 mm Height: 2,050 mm Weight: 16,750 kg 4 rolls PLC Fully hydraulic drive for top and lower rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic lower roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Conical bending device Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment complies with CE regulations Hjdpfx Aloypbque Dsu OPTIONS: Upper and side plate supports NC control IMPORTANT NOTES FOR CONICAL BENDING: The max. plate thickness is 50% of the rated capacity The cone length must not exceed 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 4 months from order Country of origin: Turkey Price: €32,000 Leasing rate: €611.20 Saw frame: Double column guide Saw blade dimensions: 5000 x 34 x 1.1 mm Variable band speed: 20 - 120 m/min Cutting capacity 0° (round): 330 mm Cutting capacity 0° (square): 330 mm Cutting capacity 0° (flat): 350 x 330 mm Working height: 845 mm Hydraulic motor: 1.1 kW Main motor: 3 kW Coolant pump motor: 0.12 kW Length: 2815 mm Width: 1935 mm Height: 1855 mm Weight: 2560 kg Servo feed with 700 mm stroke Cutting length up to 9,999 mm (multiple feed) Omron touchscreen, up to 50 different cutting lengths and 30 programs can be saved Linear guide 41 mm saw blade Control panel Hydraulic vise Hydro-mechanical band tensioning Heavy-duty gearbox Coolant system Sensitive pressure adjustment Inverter for infinitely variable band speed Chip brush Optical height adjustment Hodpfxjwiq Hgs Al Deu Chip conveyor Operating manual in GERMAN or ENGLISH OPTIONS: Roller conveyors and saw bands available upon request

Stanje: novo, Stanje: novo Dobavni rok: približno 8 tednov po naročilu Država porekla: Turčija Cena: 31.080 € Leasing obrok: 593,63 € Debelina pločevine – konstrukcijsko jeklo: 0,4 – 3 mm Največja širina pločevine: 400 mm Največji prečni prerez: 1.200 mm² Premer podajalnih valjev: 80 mm Podajalna hitrost: 75 m/min Pospešek podajanja: 10 m/s² Motorni navor: 10 Nm Stožčato-čelni zobniški prenos WATTDRIVE (izdelan v Avstriji) Hodpfx Ajynnf Aol Dju Pnevmatski sistem FESTO Servo pogon in krmiljenje SIEMENS 7'' barvni zaslon na dotik SIEMENS 2 pogonska valja Zunanji enkoder MOŽNOST: Ročni volan in modul za daljinsko vzdrževanje Simlinx € 4.290,--

Stanje: novo, Stanje: novo Dobavni rok: približno 10 tednov po naročilu Država porekla: Turčija Cena: 31.620 € Leasing rata: 603,94 € Debelina pločevine – konstrukcijsko jeklo: 0,4 – 2 mm Maks. širina pločevine: 600 mm Maks. presek: 1200 mm² Premer podajalnih valjev: 80 mm Hitrost podajanja: 75 m/min Pospešek podajanja: 10 m/s² Motorni navor: 10 Nm Stožčasti čelni zobniški prenos WATTDRIVE (Izdelano v Avstriji) Pnevmatski sistem FESTO Servo pogon in krmiljenje SIEMENS 7'' barvni zaslon na dotik SIEMENS 2 gnana valja Zunanji enkoder Hsdpeynnf Nsfx Al Deu OPCIJA: Rokov koles in Simlinx daljinski servisni modul 4.290 €

Stanje: novo, Condition: New Delivery time: approx. 4 months from order placement Country of origin: Turkey Price: €27,700 Lease rate: €529.07 Saw frame: double-column guide Saw blade dimensions: 6000x41x1.3 mm Infinitely variable blade speed: 20-100 m/min Cutting capacity at 0° round: 560 mm Cutting capacity at 0° square: 560 mm Cutting capacity at 0° flat: 750x560 mm Cutting capacity at 45° round: 410 mm, square: 410 mm Working height: 590 mm Hydraulic motor: 1.1 kW Main motor: 4 kW Coolant pump motor: 0.12 kW Length: 3400 mm Width: 1000 mm Height: 2050 mm Weight: 2045 kg Saw blade inclined by 2° Linear guides Operator control panel Material sensor pin Coolant system Roller conveyor 1200 mm Hjdpfjwiqt Hjx Al Dsu Hydraulic vice Hydromechanical blade tensioning Frequency inverter for stepless blade speed adjustment Adjustable cutting pressure Saw blade brush Optical height control Safety switch Operating manual in GERMAN or ENGLISH OPTIONS: Swivel base for miter cuts Hydraulic material clamping from above Minimum quantity lubrication Laser cutting line Roller conveyors and saw blades

Stanje: novo, Stanje: novo Hodoynnb Djpfx Al Dou Dobavni rok: približno 3-6 tednov po naročilu Država izvora: Turčija Cena: 130.600 € Leasing obrok: 2.468,34 € Pritisna sila: 200 t Dolžina mize: 1.200 mm Širina mize: 740 mm Prehodna odprtina v mizi: 220 mm Hod: 24 - 140 mm Število hodov: 50 1/min Tlačilo: 950 x 600 mm Nastavitev tlačila: 100 mm Globina: 390 mm Motor: 15 kW Dolžina: 2.350 mm Širina: 1.700 mm Višina: 3.435 mm Teža: 14.900 kg 8-točkovno vodilo tlačila Sprednje varovalo z varnostno svetlobno zaveso Motorizirana nastavitev tlačila Hidravlična zaščita pred preobremenitvijo Avtomatsko mazanje Oprema v skladu s CE direktivami Navodila za uporabo v NEMŠČINI in ANGLEŠČINI

Stanje: novo, Stanje novo Rok isporuke cca. 12-14 nedelja od porudžbine Zemlja porekla Slovačka Cena 28.300 € Leasing rata 540,53 € Pritisna snaga 40 t Hsdpfx Alsynm A To Dou Dužina savijanja 2000 mm Ose X i Y osa Hod 100 mm Ugradbena visina 310 mm Pogonski koncept hidraulični Rezervoar za ulje 38 l Motor 6 kW Dužina 2500 mm Širina 1200 mm Visina 1900 mm Težina 2100 kg Zadnji graničnik 420 mm Matrica 1 Brzina 10 mm/s Brzina povlačenja 12 mm/s Brzina zadnjeg graničnika 40 mm/s Preciznost pritisne grede +/-0,02 mm Preciznost zadnjeg graničnika +/-0,05 mm 2 ose (Y i X) Motorni zadnji graničnik sa tasterom i ručnim finim podešavanjem sa brojačem Dubina presovanja Y i gornja mrtva tačka preko kontrolera za predizbor Međuprsten sa polugom za brzo stezanje za stezanje gornjeg alata Gornji alat 1010/75/R0,8/105 1x835 mm + 1x835 mm podeljeno Matrica 2009/85° (V16/22/35/50 mm) 1x835 mm + 1x835 mm podeljeno 2 ruke za podupiranje lima Oprema u skladu sa CE normama Ulje uključeno Uputstvo za upotrebu na nemačkom

Stanje: novo, Stanje: novo Rok isporuke: oko 14 - 16 nedelja od porudžbine Zemlja porekla: Turska Cena: 29.800 € Leasing rata: 569,18 € Okvir testere: zakretni okvir Dimenzije tračne testere: 3660x27x0,9 mm Brzina trake: kontinuirano podesiva 15-120 m/min Kapacitet sečenja 0° okruglo: 320 mm Kapacitet sečenja 0° kvadrat: 320 mm Kapacitet sečenja 0° ravno: 350x320 mm Kapacitet sečenja 30° okruglo: 170 mm, kvadrat: 150 mm Kapacitet sečenja 45° okruglo: 260 mm, kvadrat: 220 mm Kapacitet sečenja 60° okruglo: 320 mm, kvadrat: 280 mm Radna visina: 740 mm Hidraulički motor: 1,1 kW Motor: 2,2 kW Servomotor: 1 kW Motor pumpe za rashladno sredstvo: 0,12 kW Dužina: 2120 mm Širina: 2100 mm Visina: 1810 mm Težina: 1810 kg NC kontrolni panel Servo pomeranje sa kugličnim navojnim vretenima Hidraulička stezna glava Hidromehaničko zatezanje trake Inverter Pumpa za hlađenje Tračna testera Četka za strugotinu Sigurnosni prekidač Podešavanje visine Uputstvo za upotrebu na NEMAČKOM ili ENGLESKOM Hsdpfowirhljx Al Dju OPCIJE (CENE NA UPIT): Hidraulički uređaj za stezanje paketa Transportni valjci i tračne testere

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €31,600 Leasing rate: €603.56 Bending length: 2,050 mm Max. bending capacity - mild steel: 6 mm Max. plate thickness without pre-bending at D=5x top roll: 6 mm Max. plate thickness without pre-bending at D=1.5x top roll: 4 mm Max. plate thickness with pre-bending at D=5x top roll: 4 mm Max. plate thickness with pre-bending at D=1.5x top roll: 3 mm Top roll diameter: 150 mm Lower roll diameter: 150 mm Side roll diameter: 130 mm Rolling speed: 1.5 / 6 m/min Hjdpoyb Szbsfx Al Dsu Motor power: 4 kW Length: 4,250 mm Width: 960 mm Height: 1,100 mm Weight: 2,800 kg 4 rolls Top roll driven by hydromotor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of the lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Movable control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: Max. plate thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Stanje: novo Dobavni rok: približno 10 tednov po naročilu Država izvora: Turčija Cena: 86.300 € Leasing obrok: 1.631,07 € Tlačna sila: 150 t Hod: 300 mm Bata: 950x650 mm Miza: 1200x750 mm Vgradna višina: 550 mm Hitri pomik: 100 mm/s Delovna hitrost: 5,5 mm/s Hitrost povratka: 165 mm/s Motor: 11 kW Dolžina: 2200 mm Hsdpfx Aswiq Tyol Dsu Širina: 2200 mm Višina: 3250 mm Teža: 8.200 kg 4-točkovno vodenje bata Miza in bat z T-utoroma Ročna nastavitev hoda preko krmilnega stikala Ročno in avtomatsko delovanje Svetlobne zavese Oprema v skladu s CE standardi

Stanje: novo, Condition: New Delivery time: approx. 14 - 16 weeks from order Country of origin: Turkey Price: €104,600 Leasing rate: €1,976.94 Saw frame: Double-column guidance Saw blade dimensions: 10,430 x 54 x 1.6 mm Blade speed: steplessly adjustable 20-100 m/min Cutting capacity 0° round: 750 mm Cutting capacity 0° flat: 1300 x 700 mm Cutting capacity 45° rectangular: 850 x 750 mm Cutting capacity 60° rectangular: 570 x 750 mm Cutting capacity -45° rectangular: 850 x 750 mm Working height: 930 mm Hydraulic motor: 4 kW Main motor: 11 kW Coolant pump motor: 0.12 kW Length: 5,500 mm Width: 2,280 mm Height: 3,400 mm Weight: 8,500 kg Hydraulic vice Hodpfx Ajynm Rdsl Dou Digital angle display Hydraulic clamping of the saw arm Manual saw arm rotation Infinitely adjustable saw arm lowering speed Automatic saw frame lift after cut completion Sensitive cutting pressure adjustment depending on material properties Hydromechanical blade tension, readable via pressure gauge Mobile control panel Spiral-bevel heavy-duty gearbox Driven chip brush Blade guidance via carbide plates and rollers Automatic blade breakage protection Coolant device Hydraulic saw frame lift Operating manual in GERMAN or ENGLISH OPTIONS: Roller conveyors and saw blades on request

Stanje: novo, Condition: New Delivery time: approx. 14 - 16 weeks from order Country of origin: Turkey Price: €46,400 Leasing rate: €886.24 Saw frame: double-column guide Saw blade dimensions: 6800 x 41 x 1.3 mm Blade speed: stepless adjustment, 20-100 m/min Cutting capacity 0° round: 560 mm Cutting capacity 0° flat: 820 x 540 mm Cutting capacity 45° rectangular: 550 x 540 mm Cutting capacity 60° rectangular: 360 x 540 mm Cutting capacity -45° rectangular: 550 x 540 mm Working height: 880 mm Hydraulic motor: 1.1 kW Main motor: 4 kW Coolant pump motor: 0.12 kW Length: 3800 mm Width: 1750 mm Height: 2350 mm Weight: 3,200 kg Hydraulic vice Digital display for angle indication Hydraulic clamping of the saw arm Manual rotation of the saw arm Continuously adjustable lowering speed of the saw arm Automatic saw frame lift after cutting cycle Sensitive cutting pressure regulation according to material characteristics Hydromechanical blade tension with pressure gauge display Mobile control panel Obliquely toothed, conical heavy-duty gearbox Powered swarf brush Blade guide via carbide plates and rollers Automatic blade breakage protection Hjdpjwiqx Ajfx Al Dou Coolant system HYDRAULIC SAW FRAME LIFTING Operating instructions in GERMAN or ENGLISH (Roller conveyor as shown in the photo—available at extra cost)

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €51,900 Leasing rate: €980.91 Shaft diameter: 120 mm Roller diameter: 390 mm Driven rollers: 3 Motor power: 15 kW Hsdpoynmruofx Al Dou Speed: 2 / 7.5 m/min Flat bar upright (cross-section / min. diameter): 125x25 mm / 1,200 mm; 30x Flat bar flat (cross-section / min. diameter): 200x50 mm / 1,000 mm; 100x Square bar (cross-section / min. diameter): 65x65 mm / 750 mm; 20x20 mm Round bar (cross-section / min. diameter): Ø 80 mm / 850 mm; Ø 20 mm Tube (cross-section / min. diameter): Ø 160x4 mm / 2,800 mm; Ø ... Rectangular tube upright (cross-section / min. diameter): 120x40x4 mm / 1,800 mm; 3x Square tube (cross-section / min. diameter): 90x90x5 mm / 1,800 mm; 30x Angle iron, leg outwards (cross-section / min. diameter): 120x120x12 mm / 1,200 mm; Angle iron, leg inwards (cross-section / min. diameter): 100x100x10 mm / 1,200 mm; UPN, leg outwards (cross-section / min. diameter): UPN 220 / 1,000 mm; UPN 1... UPN, leg inwards (cross-section / min. diameter): UPN 220 / 1,200 mm; UPN 1... IPN horizontal (cross-section / min. diameter): IPN 220 / 1,000 mm; IPN 8... Length: 2,000 mm Width: 1,650 mm Height: 1,900 mm Weight: 4,450 kg 3 driven rollers (hydraulic motor and planetary gearbox) Shafts made of hardened and ground special steel Hydraulic adjustment of both lower rollers Hardened universal rollers Side guide rolls hydraulically adjustable in 3 axes 2 speeds Usable horizontally and vertically Mobile control panel Digital display (3 axes) Machine and equipment according to CE standards Operating manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES!