Dmg Mori Dmg Mori Sprint 20/8 nakup rabljenega (58.623)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, obratovalne ure: 2.808 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NL257181158, stružna dolžina: 705 mm, potovalna razdalja osi X: 260 mm, pomik osi Y: 50 mm, pomik po osi Z: 795 mm, premer nihanja nad prečnim premičnikom: 742 mm, premer nihanja nad prečno desko: 920 mm, New auction due to buyer default on payment! TECHNICAL DETAILS Working area Swing diameter over bed max.: 920 mm Swing diameter over cross slide max.: 742 mm Maximum turning length: 705 mm Bar capacity: 80 mm X-axis travel: 260 mm Y-axis travel: 50 mm Z-axis travel: 795 mm Main spindle Power: 18.5/15 kW Max. speed: 4,000 rpm Chuck size: 10 inch Spindle bore: 91 mm Front bearing diameter: 140 mm Bwedpfx Ahezck Txs Ter Sub spindle Power: 11/7.5 kW Max. speed: 4,000 rpm Chuck size: 6 inch Spindle bore: 45 mm Front bearing diameter: 85 mm Turret and axes Tool stations: 12 Tool shank cross-section: 25 mm Max. driven tool speed: 10,000 rpm Rapid traverse X-axis: 30,000 mm/min Rapid traverse Y-axis: 10,000 mm/min Rapid traverse Z-axis: 30,000 mm/min Rapid traverse B-axis: 30,000 mm/min MACHINE DETAILS Control: M730UM with CELOS Dimensions & weight Machine height: 2,000 mm Installation dimensions: 3,347 x 2,106 mm Weight: 5,820 kg Operating hours: 2,808 h Power-on hours: 11,311 h EQUIPMENT Y-axis Sub spindle Main spindle with 10-inch chuck Sub spindle with 6-inch chuck Chip conveyor High-pressure coolant system Tool measuring device Parts catcher Workpiece ejector Interface for bar loader

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, obratovalne ure: 2.770 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NL257181158, stružna dolžina: 705 mm, potovalna razdalja osi X: 260 mm, pomik osi Y: 50 mm, pomik po osi Z: 795 mm, premer nihanja nad prečnim premičnikom: 742 mm, premer nihanja nad prečno desko: 920 mm, TECHNICAL DETAILS Working Area Swing diameter over bed max.: 920 mm Swing diameter over cross slide max.: 742 mm Turning length max.: 705 mm Bar capacity: 80 mm X-axis travel: 260 mm Y-axis travel: 50 mm Z-axis travel: 795 mm Main Spindle Power: 18.5/15 kW Max. speed: 4,000 rpm Chuck size: 10 inches Spindle bore: 91 mm Front bearing diameter: 140 mm Sub Spindle Power: 11/7.5 kW Max. speed: 4,000 rpm Chuck size: 6 inches Spindle bore: 45 mm Front bearing diameter: 85 mm Turret and Axes Tool stations: 12 Tool shank cross-section: 25 mm Max. driven tool speed: 10,000 rpm Rapid traverse X-axis: 30,000 mm/min Rapid traverse Y-axis: 10,000 mm/min Rapid traverse Z-axis: 30,000 mm/min Rapid traverse B-axis: 30,000 mm/min MACHINE DETAILS Control: M730UM with CELOS Dimensions & Weight Bjdpfjy A Nf Iox Ah Tswr Machine height: 2,000 mm Installation dimensions: 3,347 x 2,106 mm Weight: 5,820 kg Operating hours: 2,770 h Power-on hours: 10,820 h EQUIPMENT Y-axis Sub spindle Main spindle with 10-inch chuck Sub spindle with 6-inch chuck Chip conveyor High-pressure coolant system Tool measuring device Parts catcher Workpiece ejector Interface for bar feeder

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, potovalna razdalja osi X: 1.600 mm, pomik osi Y: 1.100 mm, pomik po osi Z: 1.400 mm, hitro pomikanje X-os: 60.000 m/min, hitri pomik os Y: 60.000 m/min, hitri pomik na osi Z: 60.000 m/min, širina mize: 1.000 mm, dolžina mize: 1.250 mm, obremenitev mize: 3.000 kg, število mest v zalogovniku orodij: 180, X-os: 1600 mm Y-os: 1100 mm Z-os: 1400 mm Bwjdpox Sqptjfx Ah Tor Indeksiranje osi B: 360000° Dolžina mize: 1250 mm Širina mize: 1000 mm Obremenitev mize: 3000 kg Število palet: 2 Pomik osi X: 60000 mm/min Pomik osi Y: 60000 mm/min Pomik osi Z: 60000 mm/min Vpenjalni sistem orodja: HSK-100 ISO/BT/MK Moč vretena: 52 kW Št. vrtljajev: 12000 o/min Menjalec orodij: 180 Število krmiljenih osi: 4 Dolžina: 9170 mm Širina: 6320 mm Višina: 3969 mm Teža: 39500 kg

Stanje: rabljeno, Leto izdelave: 2017, potovalna razdalja osi X: 650 mm, pomik osi Y: 520 mm, pomik po osi Z: 475 mm, Oprema: transportni trak za ostružke, CENTRO DI LAVORO DMG MORI DMC 650 V Anno 2017 Costruttore DMG MORI Modello DMC 650 V CNC Celos con Siemens 840D Dimensioni mm 4725x5090 H 2670 Peso kg 5.900 CORSE DEGLI ASSI Asse X 650 mm Asse Y 520 mm Asse Z 475 mm Avanzamento rapido 42 m/min Velocità di avanzamento fino a mm/min 42.000 MANDRINO speedMASTER Numero di giri Programmabile in continuo 1/min 20.000 Giri in modalità di preparazione 1/min 800 Potenza del motore POTENZA MAX. 40% ED kW 35 Potenza nominale 100% kW 25 Coppia Coppia massima mandrino 40% ED Nm 130 Coppia nominale 100% ED Nm 86 Attacco utensile SK40 Forza di trazione porta utensile kN 11,2 TAVOLA Dimensioni mm 960 x 570 Distanza cave a T mm 100 Numero di cave pz 4/14H12 Cava di riferimento pz 1/14H7 Carico massimo kg 800 Altezza di carico (dal pavimento angolo/superficie tavola) mm 800 4° ASSE - DIVISORE NC MORI SEIKI DDRT 200X Altezza centro mm 140 Ø tavola mm 200 Ø foro centrale mm 65H7 Ø superficie di serraggio mm 50 Cava di serraggio mm 14h6 Coppia di serraggio Nm 600 Coppia massima Nm 280 Velocità di rotazione 1/min 150 Tempo di posizionamento s 5 Tempo di ripetizione s 3 Ø massimo pezzo mm 250 Velocità massima 1/min 200 Carico Peso massimo pezzo serrato su un lato kg 102 Carico verticale massimo pezzo kg 100 Carico verticale massimo pezzo con contropunta kg 250 Carico orizzontale massimo pezzo kg 250 Peso Peso divisore NC kg 115 MISURAZIONE UTENSILE TT160 Accuratezza tastatura µm < 15 Deviazione massima elemento di misura mm 5 Forza deviazione assiale N 8 Forza deviazione radiale N 1 Velocità di tastatura max m/min 5 Grado di protezione (EN 60529) IP67 Temperatura di lavoro °C 10-40 EVACUATORE TRUCIOLI CON SISTEMA ESTESO DI RAFFREDDAMENTO Volume di riempimento l 230 UNITÀ DI RAFFREDDAMENTO MACCHINA Capacità effettiva di raffreddamento kW 4,5 Portata della pompa circuito di raffreddamento l/min 40 Refrigerante R 134 a Fluido di raffreddamento acqua - Antifrogen® L % 70/30 Volume di riempimento fluido di raffreddamento l 38 Temp. di scarico °C +15 - +30 Temp. ambiente consentita °C +10 - +45 Peso unità senza riempimento kg 130 Altre informazioni utili Ore di lavoro circa 2.200 Magazzino utensili a 20 posizioni Bjdoy Nkcnopfx Ah Towr Macchina fornita con manuali e dichiarazione di conformità CE Tutti i dati tecnici riportati sono indicativi e possono essere modificati senza preavviso, pertanto non sono da considerarsi vincolanti.

Stanje: rabljeno, Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 650 mm, pomik po osi Z: 550 mm, največja hitrost vrtenja: 12.000 obr/min, skupna masa: 7.500 kg, For sale: CNC 5-axis machining center, brand DMG, model DMU 60 P The machine is fully functional and ready for immediate use. In 2021, a new spindle was installed and all maintenance work has been carried out. History: 2019: New ball screw (KGT) 2021: New spindle 2022: Single-shift operation 2023: Occasional job orders 2024: Taken out of operation but still connected to the power supply 12/2025: Disassembled, cleaned, and placed into storage Technical data: X-axis travel: 600 mm y-axis travel: 650 mm z-axis travel: 550 mm Control system: Heidenhain TNC 426 Spindle speed range: max. 12,000 rpm Spindle drive power: 15 kW Max. torque: 130 Nm Tool holder: SK 40 Table diameter: 630 mm Max. table load: 500 kg Number of tool stations: 60 positions Max. tool length: 350 mm Rapid traverse (X/Y/Z): 24 m/min Feed speed: 20 - 10,000 mm/min Total power requirement: 44 kVA Space requirement approx.: 7.0 x 6.0 x 2.7 m Bodewbhq Hopfx Ah Tjwr Machine weight approx.: 7.5 t No chucks or vices are included in the offer. Transport and loading can be organized throughout Europe upon request and for an additional charge. Prices are quoted plus VAT. Viewing by appointment is possible. Contact us—our team will be pleased to assist you. Trade-in or exchange possible! Machinery purchase/sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you planning to sell your machine? For further information or to contact us, please visit our website.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2009, obratovalne ure: 625 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 350 mm, pomik osi Y: 240 mm, pomik po osi Z: 340 mm, skupna višina: 2.100 mm, skupna dolžina: 2.000 mm, skupna širina: 1.700 mm, skupna masa: 1.600 kg, For sale is a 3+2 axis machining center by DMG, model DMU 35 M. This machine comes from an educational institution and was used for training purposes as well as setup with controls. Especially notable are the low spindle hours. Technical data: Year: 2009 Spindle hours: 625 Machine number: 18065358844 X-axis travel: 350 mm Bwodex Aiiqjpfx Ah Ter Y-axis travel: 240 mm Z-axis travel: 340 mm Max spindle speed: 6,300 rpm Feed rate: Stepless up to 5,000 mm/min Rapid traverse: 5 m/min Servo motors for X, Y & Z axes Clamping surface: Ø 400 x 280 mm Rotary range: 360° (mechanical) Table clamping: +105° / -150° (mechanical) Max table load: 100 kg Tool change: Manual Tool holder: SK 40 Tool clamp: pneumatic/mechanical Footprint: 3,800 x 3,600 x 2,100 mm Transport dimensions: approx. 2,000 x 1,700 x 2,100 mm Weight: 1,600 kg Transport and loading can be organized throughout Europe on request, for an additional fee. Prices are subject to VAT. Inspections are possible by appointment. Contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchasing/Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your manufacturing needs? Or would you like to sell your machine? For further information or to get in touch, please visit our website.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, največja hitrost vretena: 5.000 obr/min, proizvajalec krmilnikov: SIEMENS, model krmilnika: DMG MORI SLIMline multi-touch, število mest v zalogovniku orodij: 42, This DMG MORI CLX 350 V3 was manufactured in 2023. It is a universal lathe equipped with driven tools and a C-axis. The machine features a hydraulic three-jaw chuck D210mm, a 12-position servo tool turret VDI 30 with 12 driven tool stations, and a hollow clamping device with a maximum bar capacity of D65mm. This is a great opportunity to purchase this DMG MORI CLX 350 V3 universal lathe. Contact us for further details about this machine. Additional equipment • Direct measuring system on X-axis • Chip tray • Hollow clamping device • Hydraulically operated tailstock via M-function • External electronic handwheel • DMG Mori IoT connector • Machine comes complete with tool holders, chuck, and jaws Additional information • Main spindle: A2-6 with AC motor • Hydraulic 3-jaw chuck diameter: 210 mm Bwjdpfx Aeyyuv Tjh Tor • Max. bar capacity: 65 mm • Driven tools and C-axis for advanced machining capabilities • 190 spindle hours Machine still under power

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, obratovalne ure: 113 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AL150210302, stružna dolžina: 336 mm, premer struženja: 440 mm, izvrtina vretena: 61 mm, največja hitrost vretena: 6.000 obr/min, model krmilnika: DMG MORI COMPACT LINE, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Samo 113 obratovalnih ur! TEHNIČNI PODATKI Dolžina struženja: 336 mm Premer struženja: 440 mm Premer palice (maks.): 52 mm Obseg nad posteljo: 620 mm Obseg nad prečnim suportom: 465 mm Hitrost vretena (maks.): 6.000 vrt/min Število stopenj hitrosti vretena: 1 korak Notranji premer vretena: 61 mm Notranji premer ležaja vretena: 100 mm Premer držala za štirikotno orodje: 20 mm Premer držala za vrtalne palice: 32 mm Pomik X-os: 260 mm Pomik Z-os: 375 mm Hitrost pomika po X-osi: 30.000 mm/min Hitrost pomika po Z-osi: 30.000 mm/min Bwsdpfx Aeytbqvsh Ter Število orodnih mest v zalogovniku: 12 PODROBNOSTI O STROJU Model krmiljenja: DMG MORI COMPACT LINE Frekvenca: 50 Hz Obratovalne ure: 113 h OPREMA Hladilni sistem Transporter za ostružke

Stanje: rabljeno, Leto izdelave: 2017, Technical Details: X-axis travel: 560 mm Y-axis travel: 560 mm Bwedpfxoyqybbs Ah Tor Z-axis travel: 660 mm Control: Celos Siemens 840D SL Operate ERGOline Multitouch Spindle speed: 20 – 20,000 rpm Spindle motor: 25/35 kW Spindle torque: 86 / 130 Nm Tool holder: HSK-A63 Tool magazine capacity: 60 positions Max. tool diameter: 70 mm Max. tool diameter with adjacent slots free: 170 mm Max. tool length: 450 mm Max. tool weight: 12 kg Number of pallets: 2 Pallet size: 400 x 400 mm Max. workpiece diameter: 630 mm Max. workpiece height: 900 mm Table load capacity: 400 kg Rapid traverse (X/Y/Z): 60 m/min Feed rates (X/Y/Z): 60 m/min Internal coolant supply: 70 bar Machine weight approx.: 8.5 t Overall dimensions: 3200 x 4800 x 2900 mm Equipment: Rotoclear view window 4-color signal lamp Electronic handwheel Tool breakage and tool length measurement Coolant shower Renishaw spindle probe preparation (preparation only) HSK taper cleaning station with brushes Horizontal machining center with Siemens-Celos control, 4th axis rotary table, magazine for 123 HSK-A63 tools, and 40 bar internal coolant supply. The machine has just received a new spindle.

Stanje: dober (rabljeno), Leto izdelave: 2016, obratovalne ure: 6.400 h, DMG MORI EcoMill 1100V CNC rezkalni stroj V dobro vzdrževanem stanju, DMG MORI Ecoline rezkalni stroj. Letnik izdelave: 2016. Tehnični podatki: Hitrost vretena: 20–12.000 min⁻¹, brezstopenjsko nastavljiva Glavni motor: 14 kW Vpenjanje vretena: SK40 Pomiki: X: 1100 mm, hitri pomik: 36 m/min Y: 560 mm, hitri pomik: 36 m/min Z: 510 mm, hitri pomik: 30 m/min Dimenzije mize: 1400 × 560 mm Bwedsy Ulb Njpfx Ah Tsr Največja obremenitev mize: 1000 kg Krmiljenje: Siemens SLIMline 3D Multi Touch 19" Teža: cca 5830 kg Zunanje mere: 4898 × 2770 × 2935 mm Opremljen z: IKZ (notranje hlajenje skozi vreteno) Velik magazin orodij in menjalec orodij z 30 pozicijami Renishaw Power Probe 3D-merilni sistem Transporter za ostružke Dokumentacija in zgodovina vzdrževanja Omarica za orodje z različnimi nastavki in Renishaw OMP40-2.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2018, številka stroja/vozila: 1606-I0019, Oil cooler for DMG SL-150 MC machine Weight: 68 kg Dimensions (L x W x H): approx. 1040 x 320 x 400 mm Bodpfxeiby Sks Ah Tjwr Maximum 5 operating hours Manufacturer according to label: Kouwakougyo Co. LTD.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, obratovalne ure: 2.443 h, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 271 mm, pomik po osi Z: 830 mm, moč vretenovega motorja: 17.000 W, skupna višina: 1.950 mm, skupna širina: 3.260 mm, skupna masa: 6.300 kg, proizvajalec krmilnikov: FANUC, največja dolžina izdelka: 2.440 mm, število osi: 3, Ta 3-osna DMG MORI CLX450 je bila izdelana leta 2019. Ponaša se z revolverjem za orodja s 12 postajami in integriranim protivretenom za povečano produktivnost. Stroj je opremljen s tričeljustnim vpenjalom na glavnem vretenu. Če iščete zmogljive stružne funkcije, priporočamo DMG MORI CLX450 horizontalni stružni stroj, ki je na voljo za prodajo. Kontaktirajte nas za več podrobnosti. • Različica V3 (brez protivretena, brez Y-osi) • Brez podajalnika palic Bwodpfx Aeyu Sc Eoh Tjr • Moč glavnega vretena: 25,5 kW (pri 40 % DC) ali 17 kW (pri 100 % DC) Tehnične specifikacije Protivreteno: Ne Pogonska orodja: Da

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NTX26200912, stružna dolžina: 1.530 mm, premer struženja: 670 mm, največja hitrost vretena: 12.000 obr/min, potovalna razdalja osi X: 675 mm, pomik osi Y: 300 mm, pomik po osi Z: 40 mm, največja hitrost vrtenja: 4.000 obr/min, število mest v zalogovniku orodij: 76, Simultaneous 5-axis machining with direct drive (DDM) in the B-axis HIGHLIGHTS Bodpfx Aeyap Shjh Tswr Milling spindle: compactMASTER with a shortest installation length of 350 mm Machining option: Complete 6-sided machining thanks to a high-performance counter spindle TECHNICAL DETAILS X1-axis travel: 675 mm (+550 / -125 mm) Y1-axis travel: 300 mm (+/-150 mm) Y2-axis travel: +/-40 mm Machining area Maximum machining envelope: Ø 670 mm x 1,530 mm Control system Control type: FANUC F31iB5 with CELOS Operation: CELOS - ERGOline Touch Spindle Main spindle: Standard spindle Ø 91 mm, 4,000 rpm Counter spindle: Standard spindle Ø 91 mm, 4,000 rpm Chuck Main spindle chuck: Hollow chuck 10", Ø 254 mm Counter spindle chuck: KITAGAWA 10" hollow chuck BB210A821 Protection: Double foot switch with safety cover for main and counter spindle Travel control: Automatic stroke control of the clamping cylinder for main and counter spindle Turn-mill Spindle Spindle (B-axis): Standard speed 12,000 rpm (FANUC) Tool interface: Capto C6 Positioning: B-axis with 0.0001° accuracy for 5-axis machining Tool turret Type: Turret 2 with tailstock function Equipment: 10-station turret for bolt-on tool holders Milling performance: 6,000 rpm, 40 Nm (Turret 2, FANUC) Tool magazine Capacity: 76 tools Tool interface: CAPTO C6 Measuring & Monitoring Tool presetting: Manual tool presetter for main and counter spindle, removable (standard) Position measuring system: Direct measurement system in the X, Y, and Z axes of the turn-mill spindle Sensor system: Spindle sensor measuring system with wireless signal transmission, Renishaw RMP600 Automation Signal lamp: 4-color (red, yellow, green, blue) Interface: For bar feeder (LNS, IRCO, IEMCA, Edge Technologies, multi) MACHINE DETAILS Machine dimensions (L x W): 5,825 x 2,830 mm Coolant & Chip Disposal Chip conveyor: Right discharge, hinge-type belt + drum filter Coolant: Use of water-soluble coolant (emulsion) Pressure: High-pressure coolant system, 70 bar Coolant supply: Through the spindle for tool spindle and lower turret Filtration unit: Knoll/Interlit Compressed air system Blow-off system: For chucks on main and counter spindle Oil mist system Oil mist separator: Extraction port Ø 200 mm, AFS 1600 Filter & Cooling System Filtration unit: INTERLIT TMF300/980 compact filtration unit, 70 bar Additional pressure: 15 bar for turret II with lift pump (FANUC/MITSUBISHI) Cooler: INTERLIT auxiliary cooler, 15 kW

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, obratovalne ure: 6.490 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 650 mm, pomik osi Y: 950 mm, pomik po osi Z: 700 mm, največja hitrost vrtenja: 15.000 obr/min, število mest v zalogovniku orodij: 123, TECHNICAL DETAILS Control: CELOS control with Siemens 840D sl Operate X-axis travel: 650 mm Y-axis travel: 950 mm Z-axis travel: 700 mm Spindle Speed: up to 15,000 rpm Interface: HSK-A63 Power: 21 kW (40% duty cycle), 16 kW (100% duty cycle) Torque: 111 Nm (40% duty cycle), 85 Nm (100% duty cycle) Tool clamping force: 25 kN Work Table NC rotary table, maximum permissible load: 600 kg Workpiece Dimensions Interfering contour diameter: 630 mm Height: 700 mm Bodpjxamm Iofx Ah Tswr Tool Magazine Type: Wheel magazine Capacity: 123 pockets Permissible tool weight: 15 kg Permissible total weight per wheel: 300 kg Cooling System Coolant tank: 1,300 L Drive motor A-axis and B/C-axis liquid-cooled B/C-axis gearbox liquid-cooled Measuring Systems Renishaw infrared probe, tool breakage monitoring In-process tool measurement with Blum laser, tool length and diameter measurement Measuring systems on linear axes: direct, absolute, resolution 0.00001 mm (10 nm) Feed Rates Maximum feed rate X-Y-Z: 60,000 mm/min Rapid traverse X-Y-Z: 60 m/min Accuracy Machine accuracy X-Y-Z: A

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 15.208 h, potovalna razdalja osi X: 730 mm, pomik osi Y: 730 mm, pomik po osi Z: 880 mm, skupna masa: 12.000 kg, največja hitrost vretena: 15.000 obr/min, moč vretenovega motorja: 21.000 W, število osi: 4, This 4-axis DMG MORI NHX 5000 was manufactured in 2017. It features a maximum spindle speed of 15,000 rpm and travel distances of 730 mm in the X and Y axes, with a Z-axis travel of 880 mm. The machine is equipped with a robust 500 x 500 mm pallet size and a tool capacity of 40 tools. If you are looking for high-quality machining capabilities, you should consider the DMG MORI NHX 5000 horizontal machining center that we have for sale. Contact us for further details. • Spindle torque: 111 Nm (continuous 85 Nm) • Tool holder: BT40 • Tool capacity: 40 tools (optional magazine for 60 tools) • Rapid traverse (X/Y/Z): 60 m/min • Acceleration (X/Y/Z): 1G • Pallet size: 500 x 500 mm • Number of pallets: 2 • Automatic rotary pallet changer: 2 stations • NC table B-axis: direct drive, indexing 0.001°, max. speed 100 rpm • Maximum pallet load: standard 500 kg (optional 700 kg) • Direct position measurement system; linear scale standard • Control: CELOS Siemens 840D sl with 21.5" ERGOline multitouch display • Electronic handwheel: Siemens • Coolant through spindle preparation up to 70 bar • Renishaw measuring probe OMP60 • Tool breakage detection system • Machine status signal lamp • Water-glycol spindle cooling • Application tuning cycle (ATC) • Machine bed: 3-point support Bodpfx Ajyt Hwzsh Towr • Power connection: L1 L2 L3 N PE • Connected load: 46 kVA • Maximum input current: 67 A • Circuit protection: 125 A • Short-circuit current: 1.25 kA • Maximum supply voltage: 4.0 kV • Supply voltage: 400 V ±10 % • Frequency: 50 Hz • Control voltage: AC 230 V / DC 24 V • Operating hours: 27,715 h • Spindle hours: 15,208 h Additional equipment • Knoll KF110/700 • Knoll flow monitor • High-pressure coolant system • 2x clamping towers (250 x 250 x 650 mm) TRIAG incl. accessories • 95x tool holders HSK63 (various clamping devices) Technical Specification Taper Size BT 40

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2011, merilno območje os X: 100 mm, merilno območje os Z: 1.000 mm, montažni premer: 100 mm, skupna masa: 160 kg, natančnost merjenja poti: 2 mm, teža orodja: 160.000 g, Year of manufacture: 2011 Fully automatic with manual options "Intuitive input of automatic measuring cycles" Maintenance-free and wear-free linear motors Flexible operating console From manual to fully automatic operation Low deformation even under maximum permissible load thanks to high dead weight Bwodpoyzzb Sofx Ah Tjr "FEM-optimized and thermally stable cast iron construction" RFID – data carrier system Customer-specific data storage Measuring processes with integrated data query and storage Integration of all common RFID systems "The read/write head can be positioned automatically and manually for all common tool holder systems." Technical data Length and diameter up to 1,000 mm Max. tool diameter for measurements using indexing gauge principle: 100 mm Maximum tool weight: 160 kg Tool holder SK50 (other holders available from HAIMER/Microset) Spindle nose runout accuracy: 2 µm Repeatability: ±2 µm Tool presetting Fast and precise measurement results thanks to intuitive operation "Accurate measurement values for complex and spiral milling cutters with the precise focus window" User management and access rights Display currently in 16:9 format "Fixed/movable crosshair with automatic measuring lines and automatic contour evaluation" Uniform software for all device classes Windows 7 Professional or Ultimate – as required Data exchange "Processed data is transferred either via network or USB to the corresponding data exchange drive." "All devices can transfer tool data via a bidirectional interface to almost any software (tool management, databases, CAD/CAM)."

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 11.100 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NTX1150102, Leto 2015 s krmilnikom F31iB5 s CELOS Izvor izdelave: JP Napetost: 380V/50Hz/3-fazno Dimenzije: 4169 x 2543 x 2543 mm Neto teža stroja: 10.000 kg TEHNIČNE KARAKTERISTIKE Krmilnik: Fanuc F31iB5 s CELOS Bjdpow T Snfjfx Ah Towr Glavno vreteno Os X1: 455 mm Os Y: +/- 105 mm Os Z1: 800 mm (+ 165 za ATC) Os B: 240° Revolver 2 Os X2: 160 mm Os Z2: 730 mm Vreteno 1 / Vreteno 2 Os C: 360° / 360° Kontra-rep Os A: 820 mm Maksimalna razdalja med konicami: 1.050 mm Maksimalni premer struženja Glavno vreteno: Ø 430 mm Revolver 2: Ø 274 mm Maksimalna dolžina struženja: 800 mm Premer palice: Ø 52 mm, Ø 65 mm Razen napak ali opustitev so tehnični podatki podani brez jamstva.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, obratovalne ure: 4.800 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NL154200702, Origine de fabrication JP Tension 380V/50Hz/3ph Poids net 5400 kg Position douanière 8458.9100 DONNÉES TECHNIQUES Diamètre de tournage max. 350 mm Longueur de tournage 515 mm Commande numérique M730UM MAPPS Celos Passage au-dessus du banc 923,8 mm Diamètre de rotation sur chariot 755 mm Diamètre de tournage standard 260 mm Diamètre de barre 34 mm Broche principale : Plage de vitesses - broche 100 - 8 000 tr/min Puissance - moteur de broche 11 / 7,5 kW Axe C 0,001° Diamètre de serrage 210 mm Contre-broche : Vitesse 8 000 tr/min Nez de broche A2-5 Courses des axes : Axe X 260 mm Axe Z 580 mm Axe Y 100 (+/-50) mm Bwsdpfx Aew T Sn Eoh Tsr Tourelle : Tourelle (stations X) 20 stations Stations motorisées 20 Diamètre de broche 25 mm Vitesse max. outils entraînés 10 000 tr/min Puissance outils entraînés 5,5 / 3,7 kW Avances : Avance rapide axe X 30 m/min Avance rapide axe Z 30 m/min Avance rapide contre-broche 30 m/min Avance rapide axe Y 10 m/min Avance rapide axe C 400 tr/min Puissance totale requise 31 Kva Poids machine env. 5,4 tonnes Dimensions machine env. 4,0 x 3,0 x 3,2 m Sous réserve d’erreurs ou d’omissions – données sans engagement

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 7.186 h, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: ITNC530, največja hitrost vretena: 12.000 obr/min, število osi: 5, Ta 5-osna DMG MORI DMU 60 MonoBlock je bila izdelana leta 2010. Opremljena je z avtomatskim menjalcem orodij za 60 orodij, največjo hitrostjo vretena 12.000 min⁻¹ in držalom za orodje SK40. Druge lastnosti vključujejo merilno sondo Heidenhain TS649, 3D quickSET in hlajenje skozi vreteno pri 40 bar. Idealna za kompleksne in natančne obdelovalne naloge. Za več informacij o tem stroju nas kontaktirajte na Islandiji. • Hlajenje skozi vreteno: 40 bar Bjdox D Iirspfx Ah Towr • Razpršilna pištola • Elektronski ročni kolešček • BA4 način delovanja Dodatna oprema: • Merilna sonda Heidenhain TS649 • 3D quickSET (kalibracijski/preverjalni sistem) Tehnične specifikacije Stožec SK 40

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 18.071 h, skupna masa: 6.000 kg, število osi: 3, This 3-axis DMG MORI Gildemeister CTV 250 2nd was manufactured in 2016. The machine is ideal for precise vertical turning operations and stands out for its robust construction and reliability. If you are looking for high-quality turning solutions, you should consider the DMG MORI Gildemeister CTV 250 2nd that we have for sale. Please contact us for more information. Additional Equipment • Shopturn option Machine Benefits Technical advantages of the machine: • Available from • Weight: 6000 kg • 40 kVA Bodpfxsx D Nl Ij Ah Towr • 58 A max. current • 63 A • 400 V • 50 Hz • Control: Siemens Sinumerik 840D Slimline • Main drive: AC main drive 25 / 32 kW • Duty cycle: 100% / 40% ED • Spindle speed: 5000 rpm • Torque: 280 / 360 Nm • Hollow clamping cylinder • 12-position turret with tool holders • Turret diameter: 340 mm • Hinged belt chip conveyor • 4-color status signal tower • Air blast through main spindle • C-axis with driven tool system for turret UDI 40 • Drive for all tool stations • Y-axis travel mm • Linear guide system • Ball screw spindle • AC servo motor with integrated absolute encoder • Glass scale on guide rails • Rapid traverse speed: 30 m/min • Coolant system 8 / 20 bar • Coolant tank capacity: 600 liters • Coolant pump flow rate: 8 bar / 20 l/min • High pressure pump flow rate: 20 bar / 40 l/min • Coolant supply through turret disk to all turret stations • Band filter system filtration: 40 µm • Coolant level monitoring • Integrated work area extraction max. 400 m³/h • Renishaw LP2DD workpiece probe • Probes installed at loading and unloading stations • Stylus with pneumatically actuated flap and electronic control • Measuring accuracy: 10 µm • Functional plate for additional tools • Machine cabinet temperature regulation max. 40°C • Control cabinet cooling unit up to 40°C • Hydraulic oil cooler • Remote diagnostics support via Internet • Work area rinsing with 3 flushing nozzles • Two separately switchable valves at 8 bar • Workpiece exit conveyor for SRA 160 transport system • Workpiece diameter: 100 mm • Continuous workpiece transport system SRA 160 in drag chain design • Storage capacity: 30 workpieces diameter 30–70 mm, max. 7 kg • Storage capacity: 18 workpieces diameter 30–100 mm, max. 15 kg • Maximum workpiece height: 160 mm • Maximum total workpiece weight: 320 kg including pallets • Loading height approx. 800 mm • Chain conveyor with transport prisms • Drag chain motion controlled via NC axis • Set of drag frames • Workpiece diameter min. 30 mm/max. 160 mm • Light barrier for workpiece transport system intake station • Hold-down for SRA 160 pallet loading • Robot interface Profinet • Electrical interface for 6-axis robot via Profinet • Power chuck centering and face plate chuck • Buffer tray on functional plate • Air blast cleaning for the inner workpiece area • Measuring probe with air blast with two nozzles front and rear • Clamping pressure adjustment with motor-driven valves • Clamping pressure programmable via NC program • Extension of chip chute at chip conveyor by 300 mm • Aluminum machining package • Modified sludge pump at chip conveyor • Forced indexing of band filter • Larger chip container • Extension of insertion screens on chip conveyor

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 260 mm, pomik po osi Z: 590 mm, moč vretenovega motorja: 11.000 W, skupna višina: 2.120 mm, skupna masa: 5.500 kg, največja dolžina izdelka: 2.900 mm, število osi: 3, This 3-axis DMG Mori Seiki NLX1500MC/500 horizontal turning center was manufactured in 2014. It features a maximum turning diameter without interference of 366 mm, an X-axis travel of 260 mm, and a Z-axis travel of 590 mm. With a spindle speed of 6,000 rpm and a turret equipped with 12 driven stations, this DMG Mori Seiki NLX1500MC/500 offers an excellent purchasing opportunity. Contact us for further details. • Operating hours: 11,996 • CNC control: MAPPS M730BL • Max. turning diameter without interference: 366 mm • C-axis: 360,000° • Turning length: 515 mm • Spindle nose: A2-5" • Spindle bore: 61 mm • Bar capacity: Ø 52 mm • Turret: 12 stations (all driven), index time 0.25 sec • Driven tools: 6,000 rpm, 5.5 kW • Programmable tailstock (B-axis), travel 564 mm • Coolant pump • Oil cooler • Electronic handwheel • 3-color status beacon • Air-conditioned electrical cabinet • Condition/Availability: Machine in excellent condition; outstanding appearance; very good; videos available; immediately available Additional equipment • Chip conveyor • Bar loader interface • Bar feeder magazine: SAMSYS MULTI-3000 (short bar, 1,000 mm) • Hydraulic chuck: KITAGAWA BB208, Ø 165 mm • Collet chuck: HAINBUCH COMBI TOPlus size 65 • HAINBUCH collets: Ø 6.5 - 10 - 16 - 18 - 20 - 25 - 26 - 30 - 40 mm • Square collets: 20×20 - 35×35 - 40×40 mm • Hex collet: 14 mm • Tool-setting probe arm • 7 driven tool holders (3 axial, 4 radial) • 15 static tool holders • Parts catcher Bedpfx Ahsyg Icls Tjwr • Automatic door opening/closing • Isolation transformer • Documentation and CD-ROM • Clamping brackets for transport and handling

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, obratovalne ure: 23.574 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 560 mm, pomik po osi Z: 560 mm, model krmilnika: Siemens Sinumerik 840D, največja hitrost vretena: 8.000 obr/min, The following components of the machine have been renewed: - Motor & pump of the hydraulic system - Hydraulic and pneumatic hoses (partially) - Control cabinet LT module replaced - Drum of the Knoll system TECHNICAL DETAILS Travel range X-axis: 600 mm Travel range Y-axis: 560 mm Travel range Z-axis: 560 mm Bwjdpfxoy Nbuno Ah Tsr B-axis: 360 x 0.001 (60 rpm) Spindle speed: 8,000 rpm Table size: 6 pallets, each 500 x 400 mm Table width: 400 mm Table length: 500 mm Table load capacity: 350 kg Feed rate: 1 - 60,000 mm/min Rapid traverse: 60 m/min MACHINE DETAILS Control model: Siemens Sinumerik 840D Overall length: 7,000 mm Overall width: 5,000 mm Coolant supply: 50 bar Coolant system: approx. 1,100 L Motor power: 13 kW / 20 kW Torque: 124 / 191 Nm Total connected load: 20 kW Dimensions & Weight Space requirements (L x W): 7 x 5 m Machine weight: approx. 16,000 kg Operating Hours Power-on time: approx. 48,804 h Spindle runtime: 23,574 h total EQUIPMENT - Documentation/manual - Infinitely variable spindle speed - Chip conveyor - Knoll cooling unit with drum filter (30/40/50 bar via M-command) - Tool measurement: Renishaw probe - Tool breakage control in the machining area - Pallet storage (4 positions) - Pallet sequence operation - Enclosed work area guard according to UVV - Network capability - Technical documents & installation plan

Stanje: novo, Leto izdelave: 2018, Transportni trak za ostružke z vključeno črpalko, primeren za CTV 160 Bedpey Amhyjfx Ah Tjwr

Stanje: zelo dobro (rabljeno), Transportni trak za ostružke za DMC 635 V z vključno črpalko Bwodpfx Ajyz Iicjh Tsr

Stanje: dober (rabljeno), Leto izdelave: 2014, Caracteristici tehnice ale acestui centru de prelucrare cu 5 axe Producător: DMG Model: DMU 50 An fabricație: 2014 Control CNC 3D: HEIDENHAIN ITNC530 SMART NC Tip ecran: DMG ERGOLINE®️ CONTROL 19” Masă rotativă NC basculantă, simultană: INCLUSĂ Suprafață masă: 630×500 mm Greutate maximă admisă pe masă: 250 kg / palet Masă rotativă (Axa C): 0,001º (±360º) Bedpfxjy Smyne Ah Tewr Axe Deplasare longitudinală (Axa X): 500 mm Deplasare transversală (Axa Y): 450 mm Deplasare verticală (Axa Z): 400 mm Avans rapid (axe X/Y/Z): 42.000 mm/min Avans de lucru (axe X/Y/Z): 10.000 mm/min Interval înclinare (Axa B): -5º/+110º Broșă Turație broșă: 10.000 rpm Con frână: SK40-DIN 69871 Putere motor principal: 25 kW Schimbător automat de scule (ATC) Număr locașuri ATC: 60 Lungime maximă sculă: 300 mm Echipare Transportor de șpan: INCLUS Răcire activă a dulapului electric: INCLUS Palpator de scule: INCLUS Sistem de măsurare directă: INCLUS Pistol de spălare: INCLUS Manșă portabilă de comandă: INCLUS Sistem de aspirație: INCLUS Răcire internă: INCLUS Rezervor lichid de răcire cu filtru de hârtie: INCLUS Altele Dimensiuni utilaj (Lxlxh): 5.100×3.200×2.750 mm Putere electrică totală: 27 kVA Greutate utilaj: 4.500 kg Preț la cerere