Dallan Rollforming Machine For Omega Profiles nakup rabljenega (86.433)

Stanje: novo, Leto izdelave: 2024, številka stroja/vozila: 302340, Ring bending machine Manufacturer: KB, Turkey Model: MB 30 Lower shaft: 30 mm Upper shaft: 30 mm Cgodped S Uf Ssfx Aqcju 2 driven rollers With base frame for horizontal and vertical operation Bending capacity: - Round tube up to 48 x 3.0 mm - Flat bar (upright) 50 x 10 mm - Square tube 40 x 40 x 3 mm Weight: 170 kg Motor: 0.75 kW, 400 Volt, 50 Hz, 3-phase.

Stanje: novo, Leto izdelave: 2024, Section bending machine Zopf - Model: ZB 60/3 MD Cgodpfogh T Hkox Aqceu - Year of manufacture: 2024 - Motor-driven - Three-roll drive - With digital display - Shaft diameter: 30 mm - Equipped with standard rolls - Bending capacity up to round tube 48 x 3.2 mm - Solid material up to 30 mm - Weight approx. 190 kg - Motor: 0.75 kW, 400 V, 50 Hz, 3-phase - With mobile base, for horizontal and vertical operation - New

Stanje: novo, Leto izdelave: 2024, Profile bending machine Zopf - Model ZB 60 M with base frame - Year of manufacture: 2023 - Motorized drive - Two-roll drive - Shaft diameter: 30 mm - Equipped with standard rollers Cgedpfx Aqogh T H Dsceu - Bending capacity: up to round tube 48 x 3.2 mm - Solid material up to 30 mm - Weight approx. 150 kg - Motor 0.75 kW, 400 V, 50 Hz, 3-phase - New

Stanje: novo, Leto izdelave: 2024, Ring Bending Machine, Manufacturer: Zopf – Model ZB 80/3 H eco NC - Three driven rollers with smooth surfaces - Hydraulic adjustment of the top roller - Working positions: horizontal and vertical - NC control for length and radius - Shafts supported by tapered roller bearings - Exchangeable slide rails on the guide carriage - Roller diameters: 152/162 mm - Shaft diameter: 40 mm - Shaft speed: 8.5 rpm - Drive motor: 1.5 kW - Hydraulic cylinder pressing force: 80 kN - Bending capacity: up to 60x12 mm (vertical orientation) - Round pipes: up to 80x2 mm - Angle iron: 60x60x6 mm - Solid material: 35 mm - Weight: 550 kg - Year of manufacture: 2019 Cgjdpfx Aog Ntmhoqcou

Stanje: novo, Angle iron/leg length / mm Double-T beam over x-axis / mm U-section over x-axis / mm Total power requirement: 4/380 kW Machine weight: approx. 1645 kg Space required: approx. 1500 x 1000 x 1400 mm The Gerd Wolff HPK-80 is a hydraulic profile and tube bending machine with 3 rolls. The machine is ideally suited for bending profiles, tubes, and similar materials. Model: HPK 80 Upper shaft diameter: Ø 80 mm Lower shaft diameter: Ø 70 mm Roll diameter: Ø 245 mm Working speed: 7 m/min Motor power: 4.75 kW / 380 V Dimensions (L x W x H): 1500 x 1000 x 1400 mm Weight: 1645 kg Standard equipment Welded steel construction 3 driven rolls Csdpfx Aqoyk Im Ejcegu Hardened and ground shafts made from high-strength special steel Rolls hardened and ground Horizontal and vertical working positions Hardened standard rolls Mobile control panel Mechanical lateral guide rolls with 3 axes Brake motor for precise bending 2 digital displays Optional equipment Pipe, profile, and square bending rolls Hydraulic lateral guide rolls (2 axes) Automation with NC control

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Description to follow! Cgodpoxy S D Sofx Aqcou

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994, Données techniques : 2 rouleaux réglables hydrauliquement 3 rouleaux entraînés Puissance du moteur principal : 5,5 kW La machine peut fonctionner à l’horizontale ou à la verticale Diamètre des arbres d’entraînement : 105 mm Diamètre des rouleaux standards : 275 mm Vitesse de travail : 0 – 7 m/min Affichage digital Capacités de cintrage : Fer plat : 100 x 25 mm Cornière : min. 100 x 100 x 12 mm Profilé en T : min. 120 x 120 x 13 mm Rond plein : 70 mm Tubes ronds : 100 mm Tubes carrés : 90 x 90 x 5 mm Marquage CE Dimensions (L x l x H) : env. 1600 x 1500 x 1500 mm Poids : env. 3 t État : Très bon état Accessoires : Divers outils Cgsdpsyurwvofx Aqcsu Le vendeur décline toute responsabilité pour les erreurs d’écriture ou de transmission des données. L’apparence, la technique et l’usure de la machine sont conformes à son âge ; les machines d’occasion sont vendues sans aucune garantie.

Leto izdelave: 2009, obratovalne ure: 11.720 h, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2008/065, 1 nosilec za odjemanje 1 nosilec za vodni utor 7 nosilcev za čelno brušenje 3 zgornji posneti robovi 3 spodnji posneti robovi konsola za razširitev mize smer teka traku od desne proti levi Cedpfsw Exx Asx Aqcjgu

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, RÖDER Profile Drilling System PBA 3000 NC with 2-axis positioning control Heidenhain Positip 8016 active for x and y axes and drilling unit Optimum MH35V Year of manufacture: 2024 for rational and efficient production of holes in beams, profiles, tubes, and other long parts Technical Data: Max. travel x-axis: 3000 mm Max. travel y-axis: 250 mm Max. travel z-axis: 350 mm Max. support length: 5700 mm (via extendable support rollers) Max. support load: 500 kg Equipment (Standard): 3 pcs. mechanical vices Röhm BOF 4 Max. clamping width: 220 mm Clamping width: 160 mm Jaw height: 50 mm Codpjx E Sytefx Aqcjgu Drilling Unit Optimum MH35V Technical Data: Motor: 1.5 kW, 400 V Drilling capacity in S235JR: Ø 32 mm Continuous drilling capacity in S235JR: Ø 28 mm Tapping mode: Yes Spindle taper: BT 30 Spindle stroke: 90 mm Speed gearbox: Two-stage industrial motor plus 6 transmission stages Speed range: 220 – 3100 rpm Gear head: swivels +/- 30° Minimum quantity lubrication equipped with micro dosing pump, pneumatic frequency generator, 6 mm push-in connection for air supply/device control; 75 l PE liquid tank, nozzle feed D8 mm, 2000 mm length, plastic articulated nozzle G1/8" with mounting sleeve D12 x 30 mm, nozzle tip made of aluminum Optionally available at extra cost: Pneumatic tapping device M3 – M12; Integrated on PBA 3000/6000, pneumatic, with flexible arm, Speed: 400 rpm Working range: Radius 100–950 mm, 6 pcs. quick-change inserts M4, 5, 6, 8, 10, 12; Including linear guide, adapter, pneumatic connection, and maintenance unit Subject to prior sale. No liability for typographical errors or mistakes.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, številka stroja/vozila: 607-9027, PROFILOVÁ VRTACÍ JEDNOTKA PBA 3000 pro efektivní a hospodárnou výrobu otvorů v nosnících, profilech, trubkách a dalších dlouhých dílech Technická data: Max. pojezdová dráha osa x: 3000 mm Max. pojezdová dráha osa y: 250 mm Max. pojezdová dráha osa z: 350 mm Max. délka podpěry: 5700 mm (prodloužitelná opěrnými válečky) Max. zatížení podpěry: 500 kg 3 ks mechanických svěráků Röhm BOF 4: Max. šířka upínání: 220 mm Šířka upínání: 160 mm Výška čelistí: 50 mm Digitální indikace polohy (přesnost +/-0,1 mm) Dorazové body: 10 kusů Vrtací agregát Maxion Unimax 3T AV Technická data: Motor: 1,5 kW, 400 V Vrtací výkon v St 37: Ø 35 mm Cedpjrdx A Ssfx Aqcegu Trvalé vrtání v St 37: Ø 26 mm Řezání závitů v St 37: M16 Kužel vřetene: MK 3 Zdvih vřetene: 125 mm Rozsah otáček: max. 3200 ot/min Automatické nastavení výšky osa z Minimální množství mazání Pneumatický závitořez M3-M12 Rezervujeme si právo na mezitímní prodej. Neodpovídáme za tiskové chyby a omyly.

Stanje: dober (rabljeno), Leto izdelave: 1998, prebijalna sila: 70 t, skupna masa: 2.400 kg, skupna dolžina: 2.100 mm, skupna širina: 1.300 mm, skupna višina: 1.900 mm, Profile steel shear with punching and notching station, press force 70 tons, shear capacity 450x15 mm, punching force 130 tons, punching capacity Ø 28x20 mm, throat depth for punching 500 mm, punching table 1150x530 mm with stops, shear length stop with release, 2 foot pedals, numerous punching tools; dimensions 1300x2100x1800 mm, approx. 2400 kg Cgsdpfomig D Djx Aqcju

Stanje: dober (rabljeno), Tehnični podatki: 2 valja hidravlično nastavljiva 3 valji poganjani Premer valjev: 225 mm Premer gredi: 75 mm Okroglo jeklo: premer 50 mm Kvadratno jeklo: 45 x 45 mm Ploščato jeklo: 200 x 20 mm Kotno jeklo: 75 x 15 mm Hitrost upogibanja: 7 m/min Moč motorja: 4 kW Stroj lahko deluje horizontalno ali vertikalno Dimenzije (dolžina x širina x višina): pribl. 1200 x 1100 x 1200 mm Cgjdpfx Aqeytyf Socou Teža: pribl. 1,3 t Dodatna oprema: razna orodja Prodajalec ne odgovarja za napake pri pisanju ali prenosu podatkov. Stroj je v stanju videza, tehnike in obrabe ustreznemu starosti; rabljeni stroji se prodajajo brez kakršnega koli jamstva.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Loading Unit: Horizontal loading magazine, model HLM 4-strand timing belt conveyor 6 compartments, each 285mm wide, for profile storage; max. material height as per saw cutting range, round material max. diameter 130 mm 3 sliding rails between the belts as additional support Profile length min. 2,700 mm, max. 6,500 mm Saw: Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA Saw blade diameter max. 500 mm Continuously adjustable speed Hydropneumatic saw blade feed, continuously adjustable from rear to front Control: Siemens S7-300 with touchscreen Reversing device with 5-fold stroke up to max. 5,000 mm Electric material feed 3 – 1,000 mm (single stroke) Cutting slot extension on both sides Cgsdpoxvbvvsfx Aqcju Pneumatic unloading pusher Waste flap after the saw for offcuts / remnants Cut-off length: profile-dependent, from 8 mm Menzel minimum quantity lubrication Clamping pressure regulation 2 extraction nozzles for chip extraction Unloading: Table area: 1,500 mm x 2,500 mm Pneumatic cross pusher

Stanje: novo, Machining centre with 4 CNC-controlled axes for processing profiles made of aluminium, PVC and steel Comparable to Emmegi, Elumatec, Fom, Pertici, etc. Machine frame of sturdy welded construction, stress-relieved and equipped with hardened linear guides Protective enclosure over the entire machining length Pneumatically operated safety door Milling spindle: 3.8/4.6 kW S1/S6 3.0/3.7 Nm S1/S6 max. 18,000 rpm, air-cooled with ISO 30 tool holder with minimal quantity cooling lubricant spray system for tools, including fill level monitoring Tool magazine: 5 positions, mounted on the left side of the machine bed, suitable for accommodating drilling, milling and tapping tools, angle head, and disc cutters up to Ø 150 mm Workpiece clamping: 4 pneumatic profile clamps, clamping range up to 250 mm automatic positioning via fixture on the Z-axis Workpiece positioning: One pneumatic reference stop each to the left and right on the A-axis Travel paths: X-axis 3500 mm Y-axis 370 mm Z-axis 348 mm A-axis ±90° Rapid traverse rates: X-axis 70 m/min y-axis 30 m/min Z-axis 30 m/min A-axis 60°/sec Max. working areas: X-axis 3270 mm Y-axis 250 mm at 0° / 116 mm at ±90° of A-axis Z-axis 170 mm at 0° / 200 mm at ±90° of A-axis Control software: CAD/CAM in 3D technology (option, included!) Programming system compliant with ISO standard Functionality: Linear and circular interpolation in two axes (X-Y) Three-sided machining by rotating the A-axis 90°–0°–90° End-face machining with disc cutter Operating modes: One profile bar over the entire machining length Two profile bars with split machining length Lubrication system: Automatically controlled central lubrication for all axes, ball screw drives and linear guides, with fill level monitoring Operator interface: 18.5" touchscreen Mouse + keyboard Connections: Cjdpfowrcwpex Aqcegu Electrical: 400V/50Hz (3-Ph+N+PE), 16A, supplied without power cable Pneumatics: pressure 6–8 bar Dimensions and weight: Length: 5800 mm Width: 1640 mm Height: 2000 mm Weight: 2000 kg Including: Graphical programming software CM3D/CAD3D Barcode scanner Additional network connection incl. remote maintenance/diagnostics for 1 year

Leto izdelave: 2018, stanje: dober (rabljeno), For machining aluminium and steel profiles Fully functional, in very good condition Machining length: 7200mm 3-axis control with 15" display Tool changer: 8 positions / turret 8 pneumatic horizontal material clamps Automatic clamp positioning Two separate work zones suitable for pendulum operation 2 pneumatic material stops 8 tool positions / BT30 turret Barcode scanner Handheld control device Cgodpjx Diqwefx Aqceu Safety light curtain at the front and side safety fence Minimum quantity lubrication Central lubrication Thread cutting without compensating chuck Simple programming via control device High-speed spindle up to 18,000 rpm Incl. 3 angle heads X-axis [mm]: up to 7,200 / 7,200 Y-axis [mm]: up to 485 / 310 Z-axis [mm]: up to 340 / 260 Travel speed X-/Y-/Z-axis [m/min]: 60/60/60 Max. milling cutter diameter: 25mm Max. saw blade diameter: 180mm Max. tool length: 200mm (tool + holder) Max. spindle speed: 6,000 rpm Spindle power: 6 kW Weight: approx. 5.5 t Total operating hours: 30,844 h Total spindle hours: 11,583 h

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, obratovalne ure: 193 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 7.200 mm, pomik osi Y: 480 mm, pomik po osi Z: 340 mm, največja širina rezanja: 335 mm, dolžina obdelovanca (maks.): 6.000 mm, največja hitrost rezkalne vretena: 6.000 obr/min, dolžina odseka (maks.): 6.000 mm, TECHNICAL DETAILS – Profile Milling Machine Processing length: 7,200 mm Number of axes: 4 Control system: eluCAM graphical interface, Windows XP operating environment Workstations: 2 independently operating stations Revolver tool changer: 8 tools, servo-driven Tool holder: BT 30 Disc cutter diameter: 180 mm Tool length: 150 mm (measured from holder interface) Travel Paths X-axis travel: 7,200 mm (without end-face machining), 7,080 mm (with end-face machining) Y-axis travel: 480 mm Z-axis travel: 340 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y/Z-axes: 30 m/min Positioning accuracy: ±0.1 mm/m Spindle Milling spindle speed: 1 to 6,000 rpm Milling spindle power: 6.0 kW Supply Air connection: min. 7 bar Air consumption: 100 l/min Electrical connection: 400 V, 3~, 50 Hz, 35 A EQUIPMENT - Two independent workstations with light curtain and camera system - Fixed angular milling head for 2 tools, ER20A, up to 18,000 rpm - Swivel angular milling head 4 × 90°, ER20, up to 22,000 rpm - Non-swiveling angular milling head for steel, ER20A, 1,554 rpm - Fixed saw head i=1:1, for D=300 mm saw blade, suitable for 90° cross cuts - Carbide-tipped saw blade Z=100, D=300 mm, kerf 3.2 mm - Tool holder i=1:3.86 for 18,000 rpm, ER25 - Cooling/lubrication unit for steel machining - Disc milling cutter holder BT30, D=16 mm - Disc milling cutter D=92 × 6 mm, Z=14, D=16 mm, carbide teeth TECHNICAL DETAILS – Double Mitre Saw Max. cutting length: 6,000 mm Min. cutting length at 90°: 335 mm Min. cutting length at 45°: 335 mm Saw blade diameter: 420 mm Cutting angle (rotation): pneumatically adjustable to 90° and 45° (interior); intermediate angles and acute 22.5° adjustable manually with digital display Cutting angle (tilt): pneumatically adjustable to 90° and 45° (interior) Sawing direction: saw blades move from bottom to top Control System Control type: E580/1 Length adjustment: automatic with positioning control Saw blade tilt: pneumatically automatic between 90° and 45° Positioning accuracy: ±0.1 mm/m Positioning: pneumatic clamping Operating system: Windows Saw Unit Speed: 2,800 rpm Power per motor: 4,000 W (5.5 hp) Saw blade cooling: included Air consumption per cycle without cooling: 40 l Air consumption per cycle with cooling: 64 l Supply Electrical connection: 230/400 V, 3-phase, 50 Hz Air connection: 7 bar Dimensions and Weight Length: 7,550 mm Width: 1,600 mm Height: 1,450 mm Weight: 1,750 kg EQUIPMENT - Automatically closing safety covers - Electronic positioning of heads with +/- 0.1 mm/m accuracy - Digital angle display for manually adjustable special angles - Pneumatically adjustable saw blade rotation and tilt angles - Operation via Windows control system with 8.4" display and handwheel - Saw blade cooling system included Csdpfjwprmzex Aqcegu - Saw unit with bottom feed for optimal cutting force

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Trenutno imamo na voljo upogibni stroj Roundo. Ta stroj je sposoben upogibati velike nosilce z širokimi policami — tudi v hladnem stanju — v radije ali ukrivljene oblike. Gre za robustno in vsestransko enoto, idealno za podjetja, ki želijo izboljšati ali razširiti svoje zmogljivosti za oblikovanje jekla. Cgodoxn I Rwepfx Aqcou

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna širina: 1.400 mm, skupna dolžina: 1.000 mm, skupna višina: 950 mm, skupna masa: 195 kg, vhodna napetost: 220 V, moč pogonskega motorja podajalnika: 1.100 W, sekundarna napetost: 380 V, število valjev: 7, Oprema: CE označba, dokumentacija / priročnik, nujno zaustavitev, Wir fertigen die "R-PRO 25" Doppelstehfalz-Profiliermaschine mit höchster Präzision auf modernsten CNC-Bearbeitungszentren. Mit der benutzerfreundlichen, leistungsstarken, langlebigen und robusten "R-PRO 25" Doppelstehfalz-Profiliermaschine können Sie Ihre Stehfalzarbeiten qualitätsorientiert ausführen. Als REIS STANDING SEAM TECHNOLOGIES unterstützen wir unsere Kunden jederzeit mit vorrätigen Ersatzteilen – von der Produktion bis zur Montage, vom Verkauf bis zum technischen Service. MAXIMALE MOBILITÄT ZU GERINGEN KOSTEN Große, schwer zu transportierende und kostspielige Stehfalz-Profiliermaschinen sind dank der "R-PRO 25" nicht mehr erforderlich. Mit unserer tragbaren Stehfalzmaschine ist eine hochpräzise Herstellung von Stehfalzpaneelen ohne Längenbegrenzung möglich. QUALITÄT UND VERTRAUEN – REIS STANDING SEAM TECHNOLOGIES Cgsdpfx Aqshpuhtecsu Jede produzierte "R-PRO 25" Stehfalzmaschine wird sorgfältigen Tests unterzogen. Einfache Wartung CE-Zertifikat EG-Konformitätsbescheinigung ISO 9001 DIN EN 349 DIN EN 1037 DIN EN ISO 12100-1/2 DIN EN 13849-1 DIN EN ISO 13850 DIN EN ISO 13857 DIN EN 14121-1 DIN EN 60204-1 2 Jahre Garantie Starkes Management. Loyaler, hochqualifizierter Mitarbeiterstamm. "R-PRO 25" Standardausstattung: - Standardfalz-Höhe: 25 mm - Gewicht: 195 kg - Transport mit Kleinwagen möglich - Einfach auf das Dach zu heben - Für den einfachen Transport in vier Teile zerlegbar (Standard) - Kabelfernbedienung (Standard) - Not-Aus-Taste (Standard) - Vorwärts- und Rückwärtsfunktion (Standard) - Materialbreitenverstellung (250 mm – 700 mm) (Standard) - Rollen mit Feststellfunktion (Standard) "R-PRO" Sonderausstattungen: - Sickenprägewerkzeuge (Optional) (R-Pro 25 Plus – R-Pro DUO – R-Pro MAX) - Digitaler Wegmessgeber (Optional) (R-Pro 25 Plus – R-Pro DUO – R-Pro MAX) - Kreissäge (Optional) (R-Pro 25 Plus) - Manuelle Tafelschere (Optional) (R-Pro MAX) - Gleitende Schere (Optional) (R-Pro DUO) Für weitere Informationen und Preise kontaktieren Sie uns bitte...

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, vrsta upravljanja: ročni, vrsta aktuacije: hidravlični, Geka (Spain) Hydraulic Punching, Shearing and Notching Machine Type: Hydracrop–55/110A Year of manufacture: 2001 Flat Bar Shear Capacity: 300 x 15 mm / 200 x 20 mm Blade length: 305 mm Square: 25 mm Cgodeyxpawspfx Aqcju Working height: 880 mm Angle Shear Capacity: 1100 kN Angle iron, non-deforming: 120 x 120 x 10 mm Angle iron at 45°: 70 x 70 x 7 mm Round and Square Bar Shear Round bar: 40 mm Square bar: 40 mm Notching Unit Sheet thickness: 10 mm Angle bar: 100 mm Notch depth: 90 mm Notch width: 42 mm Punching Unit Capacity: 550 kN Maximum capacity with quick-change system: Ø 40 x 10 mm / Ø 20 x 20 mm Throat depth: 250 mm Stroke length: 60 mm Working height: 1085 mm General Specifications Number of strokes per minute at set stroke length 20 mm: 25 Power: 3 kW Net weight: 1320 kg Gross weight: 1518 kg Dimensions (L x W x H): 1600 x 1100 x 2000 mm Machine Details - 2 cylinders, one for the punching side and one for the shearing side - Punch unit with quick-change system - Die holder in gooseneck design + extra support - Punches and dies up to Ø 40 mm of choice - Flat bar shear incl. table and guides for 45° and 90° - Angle shear - Round and square bar shear (also suitable for fitting U and I profiles) - Rectangular notcher - Emergency stop - Key switch for notcher safety - Selector switch for dip operation of punch and shear sides - Selector switch for foot pedal / back gauge - Stroke length adjustment for punch and shear side - 2 foot pedals - Receptacle tray for punch slugs - Dutch instruction manual Includes: Punching table incl. back gauges Notching table incl. back gauges Electric back gauge 1000 mm 30 sets of punch tools Price of the Geka Hydraulic Punching, Shearing and Notching Machine: €16,500 Machine is like new, original paint Delivery Conditions: Delivery time: from stock, subject to prior sale Delivery: ex works Baarle-Nassau Payment: before collection Prices: net, excluding VAT Machinehandel De Leeuw BV cannot be held liable for discrepancies between the technical specifications in this offer and the actual machine, accessories, and/or parts. Machines, accessories, and parts are purchased in their current condition and as known to the buyer. We cannot provide a warranty on used machines, accessories, and parts. Delivery terms: Delivery time: from stock, excluding VAT Delivery: ex Baarle-Nassau Payment: before collection Prices: net, excluding VAT Machinehandel De Leeuw BV is one of the few companies in Europe that stocks and sells primarily used Kardex Remstar automatic lift and rotating warehouse systems. We assemble and/or disassemble these systems safely with VCA-certified technicians, and we've been doing so for over 33 years. Best regards, Antoine de Leeuw Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands VAT / GST nr.: NL800103026B01 Chamber of Commerce Tilburg 18034279

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, največja hitrost vrtenja: 8.000 obr/min, dolžina gredi: 145 mm, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! TEHNIČNI PODATKI Zgornja rezkalna enota Cgsdpfx Ajxxar Uoqceu Število motorjev: 1 Dolžina gredi: 145 mm Moč motorja: 4 kW Število obratov: 8.000 obr/min PODROBNOSTI O STROJU Vgrajena skupna moč: 5 kW Moč motorja: 3 kW

Leto izdelave: 2016, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6280028128, The machine is provided "free loaded on truck". No disassembly or loading costs! TECHNICAL DETAILS Max. profile cutting width: 320 x 160 mm Min. profile cutting width (depending on gripper position): 30 x 10 mm Raw Material Feeder Length of bar feeder: 7,600 mm Finished Part Conveyor Finished part length: 3,500–4,600 mm Short Piece Cell Short piece cell (50-150/150-350): optional Feeding System Shortest raw bar length: 1,500 mm Swing arm selection: 5 (optionally 9) Support plate: 10 (above 120 mm: 5) Material Infeed Servo drive: linear Gripper adjustment electric: Y/Z Gripper guidance: standard Offcut measuring: optional Offcut processing: fully automatic Processing Station Number of axes: 5 Milling spindles: 8 (preparable) Saw Number of axes: 3 Saw blades (diameter): Ø 550 mm, optional Ø 650 mm Sawing angle: 22.5°–157.5° (pivoting) Notching cuts: standard (from above) Cgedjvvu S Iepfx Aqcju Chip Conveyor (Outfeed Slide) Number of axes: 1 Outfeed Conveyor Lifting station: yes Swing arm selection: 5 Outfeed conveyor width: 4,000 mm MACHINE DETAILS Dimensions: 20 x 3 x 4 m Weight: 8.8 t Connected load: 39 kW Operating voltage: 3/N/PE 400 V EQUIPMENT - Feeding magazine - Loading conveyor - Processing station with milling unit, sawing unit, and clamping jaws - Discharge conveyor for profiles (discharge gripper) and discharge belt - Acoustic safety cabin - Operator panel at the soundproof cabin - Control cabinet - Safety fence and safety doors

Stanje: rabljeno, Leto izdelave: 1991, with 2 double-head linear grinding units used, good condition Manufacturer: Reckmann Model: GL 162 Year of manufacture: 06/1991 Machine no.: 1622 Workpiece width: 10–100 mm Workpiece thickness: 10–106 mm Number of units: 2 x 2 Vibro longitudinal grinding units: 2 double-head, tiltable 130° Cgodpfx Aqjvwgihsceu Pressure rollers from above Lateral pressure Digital display Feed speed: 0–25 m/min, infinitely variable Space requirement: approx. 2500 mm x 1300 mm x 1300 mm Weight: approx. 850 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Transfer in as-is condition as inspected, without any warranty or guarantee

Stanje: rabljeno, Model making machines including over 100 sanding belts including approx. 30 belts 15 mm, approx. 30 belts 30 mm, approx. 10 belts 40 mm including 11 profile sanding sticks Used, top condition, low hours Manufacturer: Zimmermann Type: PS 1 Belt length: 2700 mm - 2710 mm Extraction connection: D 80 mm Space requirement: approx. 1000 mm x 600 mm x 1800 mm Weight: approx. 400 kg Cgsdpfx Aewhqxaeqcju Location: 97447 Gerolzhofen, loaded free onto truck, unpacked Handover as seen in current condition, without any guarantee or warranty

Stanje: rabljeno, used Manufacturer: Löser Belt unit: 1 Motor: 1 / 1.4 kW Speed: 2 speeds Extraction connection: integrated extraction 0.44 kW Required space: approx. 1400 mm x 800 mm x 1700 mm Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-inspected condition, as seen Without any warranty or guarantee Cedpfx Asvwfwkjqcsgu

Stanje: rabljeno, Leto izdelave: 1987, Edge and Profile Sanding Machine with New Feed Belt Used, excellent condition, lightly used, top specification Manufacturer: Arminius Model: ST-4 Year of manufacture: 1987 Machine no.: 1948 Belt feed with top pressure rollers and roller track Application-controlled sanding shoe – interchangeable with profile sanding body Profile sanding spindle with infinitely variable speed control Sanding spindle: 28 x 90 mm 1.5 kW / max. 1,500 rpm, stepless Workpiece pass-through height: 0–100 mm Motor: 1.5 kW Oscillation via motor: 0.02 kW Veneer edge sanding device with controlled shoe Front table approx. 500 mm x 1,350 mm Aggregate tiltable 0–90° Belt length: 1,600 mm Belt width: 150 mm Belt speed infinitely variable Cgjdpfsvwfx Isx Aqcou Mobile design Mitre fence Round edge sanding device Feed system stepless – belt feed with top pressure, 5–25 m/min Belt tiltable 0–90° Original price approx. €25,000 Extraction connection: 100 mm Required space approx. 1,350 mm x 930 mm x 1,100 mm Weight approx. 280 kg Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition No warranty or guarantee