Stroj za upogibanje profilov

Roundo C-9000 Beam Bender

Leto izdelave: 2002, stanje: delavnici obnovljeno (rabljeno), Beam Cutting, Drilling and Marking Line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gear drive, drive system and saw blade mounted on a wear-resistant rotary bearing. - Heavy-duty saw gearbox with helical-toothed gears in oil bath, hardened and ground. - Hydraulically adjustable saw blade feed according to table, with very fast return. - Horizontal hydraulic clamping device. Rear clamping jaw with long-travel clamping cylinder and automatic return limit. - Vertical clamping block with self-adjusting pressure plate. - Miter cutting device to set angles from 45° left to 35° right. - Material sensor for automatic change from rapid feed to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector installed on the machine table. Specifications: - Blade mounting: 100x4x30x250mm - Blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20 m/min. - Saw feed speed: 0-400mm/min. - Quick return speed: 2,000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º Cutting - Angle steel: 250mm - U-steel: 400mm - Double T-beam: 600mm - Wide flange beam: 1,008x302mm - Special flange beams: 1,000x450mm Miter Cutting: IPBv Beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm Hnsdpfx Adjhzbipeksi - 35º: 478x307mm IPBs Beam - 75º: 1,008x402mm - 45º: 524x357mm IPE Beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-steel (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y Axis): 1 unit - Horizontal (Z and W Axes): 2 units Drilling diameters: 8 - 40mm RPM: 150 - 1,100 Rapid feed - Rapid return: 3,850mm/min. - 8,000mm/min. Drill spindle feed: 0-500mm/min. Spindle rapid positioning speed: 15,000mm/min. Automatic tool changer: 5 tools per drilling unit. 3x5 = 15 tools total Total power: 45KW MARKING UNIT FEEDING SYSTEM: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR INFEEDING BEAMS PARALLEL TO ROLLER CONVEYORS 30 METERS OF ROLLER CONVEYORS FOR OUTPUT + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL PARTS THE VAST MAJORITY OF ROLLERS ARE MOTORIZED The entire line occupies approximately 60 linear meters from input to output. *Installation drawings available on request.

Stanje: dober (rabljeno), Tehnični podatki: Delovna dolžina: 2050 mm Največja zmogljivost upogibanja: 18,0 mm Predupogib: 12,0 mm Hodpfx Adoxruvzskjni Premer zgornjega valja: 280 mm Premer spodnjega valja: 280 mm Naprava za stožčasto upogibanje Hidravlični nagibni ležaj Moč motorja: 7,5 kW Dimenzije (dolžina x širina x višina): pribl. 3650 x 1550 x 1650 mm Teža: pribl. 7,5 ton Prodajalec ne odgovarja za napake pri tipkanju ali prenosu podatkov. Stroj je po videzu, tehniki in obrabi primeren svoji starosti; rabljeni stroji se prodajajo brez kakršnega koli jamstva.

Stanje: rabljeno, Leto izdelave: 1987, Technical Details: Pressing force: 200 t Bending length: 4000 mm Distance between uprights: 3530 mm Control for programming: DNC 7000 Max. stroke: 220 mm / min: 200 mm Throat depth: 320 mm Approach speed: 70–80 mm/sec Working speed: 10 mm/sec Return speed: 49 mm/sec Backgauge: 700 mm, motorized Table dimensions (L x W): 4110 x 180 mm Working height: incl. table extension mm Interface: RS 232 Connection voltage: 380 V Total power requirement: 15 kW Machine weight approx.: total: 17.0 t Hodpfxeu Icc Ao Adkoni Machine dimensions (L x W x H): 4.6 x 1.6 x 3.3 m Heavy-duty welded steel construction Possible operating modes: manual, semi-automatic, fully automatic incl. 2 table extensions Back support 700 mm travel, motorized and 2 support arms with 1500 mm travel, motorized, right/left Operation via control panel with emergency stop as well as electrical foot switch Hydraulics: max. pressure 318 bar; oil capacity approx. 170 liters; pump output 19.3 l/min. Control DNC 7000, graphical display, PC software Equipment: Cutting zone lighting Stroke counter Tooling optional *

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 120 mm, premer struženja: 1.550 mm, premer struženja nad ležiščem sani: 1.550 mm, premer struženja nad zgornjim sanežem: 1.220 mm, stružna dolžina: 6.000 mm, skupna dolžina: 8.500 mm, skupna širina: 1.600 mm, skupna višina: 1.600 mm, teža obdelovanca (maks.): 15.000 kg, nosilec vretena: MK 6, The universal lathe PORĘBA TR-155B2/6M has been comprehensively rebuilt and modernized by us. It features technical parameters that match those of the technical and operational documentation of a new machine, complies with the WOT acceptance standards as well as Polish standards, and also fulfills EU requirements. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: Order-specific general overhaul, delivery time 3.5 months from placing the order. Technical data: - Distance between centers / turning length: 6,000 mm - Swing over bed: 1,550 mm - Swing over cross slide: 1,220 mm - Swing in gap: 1,880 mm - Spindle bore diameter: 120 mm - Maximum workpiece weight between centers: 9,000 kg - Maximum workpiece weight between centers + 1 steady rest: 12,000 kg - Maximum workpiece weight between centers + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 – 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power [kW]: 27/41 (1st gear / 2nd gear) - Overall dimensions: - Total length: 8,500 mm - Width: 2,130 mm - Height: 1,550 mm - Total weight: 14,100 kg Standard equipment: tailstock, coolant pump, chuck guard, toolholder Optional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and versions - Digital Read Out for 2 axes, including display, with installation and calibration Hnodpsv Ab Dqofx Adksi - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change toolpost - Rear safety guard along the entire machine length - Inverter including soft-start function and potentiometer for stepless speed control

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, skupna masa: 35.000 kg, Ковашки чук HUTA ZIGMUNT тип MPM 1000A, 3600 кгм, произведен в Румъния, модел CM 1250. Hedpfxotgpdze Adksni

Stanje: rabljeno, Clamping Plate – Table of a Long Planer Machine – Table Width / Clamping Width: 1845 mm Table Length / Clamping Length: 5505 mm 7 longitudinal T-slots for T-slot nuts: M30 T-slot spacing: 263 mm Total length: 6230 mm Total plate height: 350 mm Hedpfebn Amfox Adkeni Weight: 11 t

Stanje: novo, Leto izdelave: 2025, Enostavno vzdrževalna naprava za odstranjevanje prahu, posebej razvita za agresiven peskalni prah z predsobo s prizmatičnim ločevalnikom, v osnovi sestavljena iz: a) 1 kos kartušnega suhega filtra, tip PF 2.16.B250 za 30.000 m³/h (na voljo tudi druge velikosti) Sestavljen iz stabilnega, vakuumsko neprepustnega 3 mm jeklenega ohišja, razdeljenega na surovi plinski prostor s filtrskimi kartušami, filtrsko predsobo s prizmatičnim ločevalnikom in čistim plinskim prostorom s čiščenjem filtra z uporabo stisnjenega zraka, vsak z ločenimi servisnimi vrati Easy Open. Hnjdodrtaljpfx Adkji Lijak za zbiranje prahu z režnim ventilom ali zvezdastim dozatorjem za odstranjevanje prahu z Big Bag vrečami. Krmiljenje magnetnega ventila z indikatorjem diferenčnega tlaka za optimalno nastavitev čiščenja filtrov. Servisna vrata kot nihajna vrata – enostavno vzdrževanje.

Stanje: rabljeno, Leto izdelave: 2004, The press brake was manufactured in 2004 in Turkey, at the ERMAKSAN factory. The press brake is in good condition and is sold with tooling. The machine is connected and can be tested and inspected on site. Specification: Hnodjq U Sdrjpfx Adkoi Model: Ermaksan AP 2600/80 Year: 2004 Working length: 2600 mm Bending force: 80 T Axes: Y1-Y2-X Tooling: Included Weight: 5.5 T Motor: 7.5 kW If you have any further questions, we will be happy to answer them.

Stanje: novo, Leto izdelave: 2025, skupna širina: 1.000 mm, skupna dolžina: 1.600 mm, skupna višina: 950 mm, moč: 1,5 kW (2,04 KM), Maschine zur Herstellung von Dachelementen F3-27 mit Clip-Relief Die OOO „Evolutioner“ hat die Dachpaneel-Profiliermaschine F3-27 mit Clip-Relief speziell für die Produktion von Dächern mit doppelstehender Falzprofilierung entwickelt. Das Stehfalz-Dach wird häufig beim Bau verschiedenster Gebäude und Konstruktionen sowie bei der Sanierung historischer Häuser und architektonischer Objekte eingesetzt. Das Stehfalzsystem verleiht dem Dach ein ansprechendes Erscheinungsbild und unterstreicht dessen Einzigartigkeit sowie das architektonische Design. In der modernen Architektur dienen Stehfalzpaneele oft auch zur dekorativen Gestaltung von Fassaden an diversen Gebäuden. Die Profiliermaschine F3-27 ermöglicht das Formen von Metall-Dachpaneelen beliebiger Länge – die Umformlänge ist unbegrenzt. Die Maschine ist äußerst leicht und daher unmittelbar am Montageort des Daches einsetzbar, sodass die Profilierung der Elemente direkt vor Ort erfolgen kann. Somit entfällt der Transport der fertigen Dachpaneele von der Werkstatt zum Bauort, wodurch das Risiko von Transportschäden sowie Transportkosten erheblich reduziert werden. Technische Daten: Profilierlänge – unbegrenzt; Anzahl der Umformstationen: 7; Schlosshöhe (mm): 27 Die Metall-Dachpaneelmaschine F3-27 verfügt über ein einfach verstellbares System zur Breitenanpassung – zur Einstellung der Paneelbreite muss lediglich ein spezielles Handrad gedreht werden. Als optionale Ausstattung zur F3-27 Profiliermaschine sind erhältlich: - Querschneidemesser - Längenmessgerät - Sickenwalzen - Radienwalzen - manuelle Falzzangen - elektrische Falzmaschine ESM-1 - Schiebeclipformer - Festclipformer - Fußabwickelhaspel - Sickenpaneel-Profiliermaschine RPFM - automatische Schere mit Automatiksystem Die mobile Dachpaneel-Profiliermaschine F3-27 ist mit sechs Walzenpaaren ausgestattet, um eine Profilhöhe von 27 mm herzustellen. Ein zusätzlicher Ständer ermöglicht das Einbringen eines Clip-Reliefs. Das Clip-Relief ist eine spezielle Biegung am Paneel, die dazu dient, Schiebe- oder Festclips abzudecken. Diese Clips werden zur Befestigung der Dachpaneele am Dachrahmen verwendet. Darüber hinaus produzieren wir folgende Metall-Dachpaneelmaschinen: Hedpsp Stgnefx Adkoni Stehfalz-Dachmaschine F3; Dachpaneel-Profiliermaschine F3-9 mit Clip-Relief; Snap-Lock-Dachpaneel-Profiliermaschine SL-1; automatische Snap-Lock-Dachpaneelmaschine SL-1 auto.

Stanje: novo, Leto izdelave: 2025, Velik stroj za lasersko rezanje cevi in profilov. Hnodpfomxl S Asx Adkji Do premera H profil do 12 metrov dolžine cevi ali profila. Laserska glava glede na debelino materiala. Ponudba na zahtevo. Montaža in usposabljanje vključena.