Alzinger Maschinenbau Lepton 5100 nakup rabljenega (1.048)

Stanje: rabljeno, Leto izdelave: 1978, Machine no.: 40 1008 Rated current: 20 A Voltage: 24 V Machine weight: approx. 3.5 t Dodpfjwg Hunsx Aahecl

Stanje: pripravljen za uporabo (rabljen), * Znamka: RN Maschinenbau * Površina: dolžina 5500 mm, širina 2100 mm – 2 etaži * Velikost odprtine zgornjega sita: [] 18 mm. Dsdpfx Aeywmpmsahocl * Velikost odprtine spodnjega sita: [] 8 mm. * Pogon: 30 kW elektromotor * Vključuje: vzmeti.

Stanje: pripravljen za uporabo (rabljen), * Znamka: RN Maschinenbau * Površina: dolžina 5500 mm, širina 2300 mm – 3 etaže * Pogon: 30 kW E-motor * Vključuje: vzmeti. Dcodpfxjywmpgs Aahel

Leto izdelave: 1972, stanje: nepreverjeno (rabljeno), številka stroja/vozila: SW3a DP. U. AP. 40923 , Guillotine Shear: A used guillotine shear (swing beam shear) by manufacturer Wieger. On this shear, the blade gap does not need to be adjusted when cutting different sheet thicknesses. Max. cutting capacity: 10 mm Model/Type: SW3a DP. U. AP. 40923 (with lamellar working clutch with brake, electro-pneumatically operated) Year of manufacture: 1972 Condition: unchecked - used Dcodpfx Aaed Eg Ngjhel

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, The steep conveyor belt is for sale and has the following dimensions; an operating manual is of course also available. The conveyor belt operates on 230 volts and, via frequency inverter (SEW), the speed can be adjusted from 1 m/min to 15 m/min. Length: 1600 mm Belt width (NB): 200 mm Overall width (GB): 290 mm Dcodevadvqepfx Aahel Frequency inverter (FU): SEW

Stanje: rabljeno, Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, Rezalni mlin DHB Maschinenbau v kombinaciji z zračno odsesovalno napravo in zvočno zaščitno ohišje Moč motorja: 15 kW Letnik: 2012 Dcjdoyxw Iijpfx Aahsl Širina rotorja: 600 mm Premer rotorja: 260 mm Število nožev rotorja: 6 kosov v 3 vrstah Število statornih nožev: 4 kosi v 2 vrstah Prečni presek dovoda: 600 x 280 mm Hitrost vrtenja rotorja: 580 obr/min Oprema: zvočno zaščitno ohišje (opcijsko: primeren ventilator in ciklon ter prav tako na voljo kompletne rešitve za odsesavanje) Teža: 1250 kg Sito: 10 mm Dimenzije: V: 1925 mm, globina: 950 mm, širina: 1260 mm

Leto izdelave: 1990, stanje: dober (rabljeno), Wickert Maschinenbau GmbH Landau vulcanizing press Year of manufacture: 1990 Machine no.: 2559 Pressing force: 2800 kN Djdpen Sm Aysfx Aahocl Heating plates: 500 x 500 mm Heating: electric Plate gap: 200 mm Control: Siemens S5 OP17 (conversion to S7 possible) Includes sliding table, vacuum pump, vacuum chamber, storage tank Good used condition. With CE marking.

Leto izdelave: 1993, stanje: dober (rabljeno), Wickert Maschinenbau GmbH Landau Vulcanizing Press Year of manufacture: 1993 Machine no.: 2758 Press force: 2,800 kN Heating plates: 500 x 500 mm Heating: electric Plate opening: 200 mm Control: Siemens S5 OP17 (conversion to S7 possible) Dedpfxsn Sm A Sj Aahecl Including sliding table, vacuum pump, vacuum chamber, storage tank In good used condition. With CE marking.

Stanje: novo, Leto izdelave: 2026, max. cutting height: 200 mm max. cutting width: 400 mm max. passage width: 490 mm feed speed: 5–30 m/min saw motors: 2 × 37 kW (higher power available) feed motor: 2.2 kW Dsdpju I Duofx Aahscl saw shaft diameter: 70 mm saw blade diameter: 325 mm weight: 2,800 kg Standard features: electric height adjustment for upper rollers Optional equipment: laser with adjustment mechanism driven roller conveyors electronic braking system

Leto izdelave: 2024, stanje: novo, max. cutting height: 160 mm max. cutting width: 600 mm min./max. edging width: 25-300 mm width adjustment times: 0.2-1.0 sec. feed rate: 5-30 (70) m/min saw motors: 37 kW (higher kW available) feed motor: 2.2 kW saw shaft diameter: 70 mm weight: 3,500 kg Standard equipment: 1 adjustable bushing 1 fixed bushing digital cutting width display automatic cutting width adjustment Dsdpfxeu I D Dj Aahecl Optional equipment: electric height adjustment for feed rollers laser with adjustment device driven roller conveyors electronic braking system

Stanje: novo, Leto izdelave: 2026, • Dimensions: 600 x 3,000 mm • Transport chain M 56 with protective rollers and MS pushers • 2.2 kW SEW gear motor for feed chain drive • Automatic centering of round timber to the rotor center • Dimensions: 1,500 x 4,500 mm • Machine suitable for round timber with a diameter of 6 – 35 cm • 18.5 kW drive motor for the rotor • 4 pre-cutters • 4 main cutters • Each equipped with hydraulic pressure system • 1 pair of centrally centering rollers before the rotor Dcodpsu Rpibofx Aahol • 1 pair of centrally centering rollers after the rotor • 4 kW SEW gear motor for roller drive • 30 m/min feed speed • 1 pair of non-driven rollers at the outfeed

Leto izdelave: 2024, stanje: novo, - 4 singulation stages - Log length on request - Log diameter on request - Discharge height on request Dodpfxspfaube Aahocl - 5.5 kW SEW geared motor - R127 SEW gearbox

Leto izdelave: 2024, stanje: novo, - 6,000 mm cutting length - Minimum cutting length 600 mm - 5 saw supports - Cutting height 80 - 140 mm - 4 kW saw motor - 1.5 kW variable feed 10-30 m/min Optional: - Disposal conveyor belts Dcedpfxspfcgaj Aahsl

Stanje: novo, Leto izdelave: 2026, - 200mm cutting height - 750mm cutting width - 5–30 m/min stepless feed rate - 90 kW saw motor Dcjdpfxsca Haws Aahel - 3 kW feed motor - 75mm saw shaft diameter

Leto izdelave: 2024, stanje: novo, - 150 mm feed height - 430 mm feed width - 30 mm chip length - 2 chopping knives + 1 counter knife - 440 mm rotor diameter - 590 rpm rotor speed - 30 m/min feed rate - 37 kW main motor - 3 kW and 2.2 kW infeed rollers - 6,000 mm long infeed conveyor belt - 2,000 mm long discharge conveyor belt underneath the machine Dsdpfx Ajful Uioahocl

Leto izdelave: 2024, stanje: novo, The plant is available immediately! • Suitable for round timber diameters from 10 cm up to 50 cm • Suitable for round timber lengths from 2 – 6 m • 4-strand infeed conveyor, 6 m long • 4-strand singulator, 2 m long • 4-strand separator, 2 m long • Conveyor with pin conveyor chain M 112 and protective rollers • Block haul with 2-inch chain and pusher dogs • Special pushers for low-noise transport • Measurement with 1 mm resolution Dcjdpfx Aaogvu Aljhjl • Measuring frame with additional heating and sun protection roof • Display of all operating statuses on a 17" monitor • Fully automatic sequence control • Various storage options and sorting criteria • 5 ejectors left/right, powered by SEW geared motors with brake • Spacious, thermally insulated control cabin • 4 surveillance cameras with flat screen monitor • Control cabinet with all cables included • Sorting criteria as agreed

Leto izdelave: 2024, stanje: novo, max. cutting length 3,000–8,000 mm min. cutting length 500 mm Dcedpfxjxfzlj Aahjl max. cutting height 80–140 mm infinitely variable feed rate 10–30 m/min saw motor power 4.0–7.5 kW feed motor 1.5 kW number of saw carriages 2–6 weight 1,000–2,500 kg

Leto izdelave: 2024, stanje: novo, - 340 mm maximum cutting height - 70–250 mm maximum cutting width - 500 mm passage width - 6000 mm cutting length - 3–20 m/min feed speed - 2 x 18.5 kW saw motors - 1.1 kW feed motor - 0.25 kW width adjustment motor Djdpfx Aae E Rg Sshjcl - 1300 kg weight

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, moč: 55 kW (74,78 KM), • 160 mm višina reza • 600 mm širina reza • 70 mm žagin vreteno • 1 komplet distančnih obročev po želji kupca • 5 – 30 m/min brezstopenjski pomik • 2,2 kW motor za pomik • 4 poganjani spodnji valji • 2 poganjana zgornja valja • 3200 kg teža • 55 kW žagin motor • Popolna električna oprema z razdelilno omaro in upravljalno konzolo Dodpfx Aasxqd Nnehecl • CE skladna izdelava • Stroj lakiran v RAL 6011 • Zaščitne naprave lakirane v RAL 7032

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, • 350 mm maximum cutting height • 75-250 mm minimum/maximum cutting width • 100 – 350 mm minimum/maximum round timber diameter • 18-80 mm side board width • 1.8 – 6 m cutting length Dcjdpfehkh Npsx Aahjl • 550 mm saw blade diameter • 4/6 simultaneous saw cuts • 5-30 m/min variable feed speed • 2 x 30 kW and 2 x 22 kW saw motors • 3 kW SEW feed gearbox motor • Automatic 6-position width adjustment • Infeed table with 3-way turning device • 2 pairs of centering rollers with pneumatic pressure • Powered infeed roller with 0.75 kW motor and pneumatic pressure • 2 pairs of powered outfeed rollers, each with 0.55 kW motor • 4 pairs of pneumatic pressure rollers in outfeed

Leto izdelave: 2024, stanje: novo, Round timber cross conveyor - Number of chain strands according to customer specifications - Length and width according to customer specifications - Heavy-duty SEW geared motors Dcjdjhmp Ibepfx Aahel - Solid pin conveyor chain with protective rollers

Leto izdelave: 2026, stanje: novo, - 260 mm cutting height - 750 mm passage width - 5–30 m/min infinitely variable feed rate - 2 x 75 kW saw motors Dcedpfobu Rqpsx Aahjl - 3 kW feed motor - 70 mm saw shaft diameter - 400 mm saw blade diameter - 5,000 kg weight

Leto izdelave: 2024, stanje: novo, max. cutting height - ø 340 mm min./max. cutting width: 80 - 250 mm min./max. side board: 18 - 80 mm max. cutting length: 6,000 mm feed rate: 5 - 30 m/min saw motors: 2 x 55 kW feed motor: 4.0 kW width adjustment motor: 0.55 kW infeed roller motor: 0.75 kW weight: 8,000 kg Special features: Synchronously adjustable laser infeed table extension up to 8,000 mm automatic width adjustment with 6 fixed positions equipment for 1,000 mm diameter blades Dcedpfsu Izkex Aahol motor-driven log turning device electronic braking system

Leto izdelave: 2024, stanje: novo, - 10,000 mm standard length - 800 mm standard roller width - 2.2 kW roller conveyor drive Dcsdobrq R Dspfx Aahjl - 0.75 kW feed roller drive - pneumatic roller lifting - pneumatic centering

Leto izdelave: 2024, stanje: novo, • 2.5 – 6 m cutting length • 120 – 450 mm maximum cutting height • 80 – 250 mm cutting width • Infeed table with centering rollers • Infeed table with log turning device • Saw with 6-stage width adjustment • Outfeed bridge with 2 powered outfeed rollers • Outfeed bridge with 5 pairs of pressure rollers • 650 mm saw blade diameter • 2 x 37 kW bottom saw motors • 2 x 30 kW top saw motors • 6 saw cuts • 4 kW SEW feed gear motor Dcsdpfxsgp Su Es Aahol • 5 – 30 m/min stepless feed speed