2019 Henkovac T4 Vakuumski Stroj nakup rabljenega (32.931)

Stanje: novo, Stanje novo Dobavni rok cca 12 tednov od naročila Država porekla Turčija Cena 43.000 € Leasing obrok 821,3 € Dolžina upogibanja 2050 mm Maks. zmogljivost upogibanja – konstrukcijsko jeklo 10 mm Maks. debelina pločevine brez predupogiba – konstrukcijsko jeklo 10 mm Maks. debelina pločevine s predupogibom – konstrukcijsko jeklo 8 mm Maks. debelina pločevine brez predupogiba pri D=5x zgornji valj 10 mm Maks. debelina pločevine brez predupogiba pri D=1,5x zgornji valj 8 mm Maks. debelina pločevine s predupogibom pri D=5x zgornji valj 8 mm Maks. debelina pločevine s predupogibom pri D=1,5x zgornji valj 6 mm Premer zgornjega valja 200 mm Premer spodnjega valja 200 mm Premer stranskega valja 180 mm Hitrost valjanja 6 m/min Dolžina 3850 mm Crjdpfxeyb S Arj Anujh Širina 1350 mm Višina 1290 mm Teža 3750 kg Motoriziran pogon valjev Zgornji in spodnji valj poganjana Hidravlično pozicioniranje stranskih valjev 3 digitalni prikazovalniki Hidravlične odklopne ležaje Kaljeni valji Stožčasta upogibna naprava Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI OPCIJE (CENE NA ZAHTEVO): Zgornja podpora Stranska podpora Spremenljiva hitrost NC krmiljenje

Stanje: novo, Condition: new Delivery time: approx. 8 weeks from order Country of origin: Italy Price: €39,500 Leasing rate: €754.45 Max. diameter (steel pipe): 127 mm Length: 850 mm Width: 1200 mm Height: 850 mm Weight: 720 kg Max. bending modulus (E-modulus): 80 cm³ Standard steel pipe: 127 x 7.1 mm Gas pipe for pipelines: 4" x 8.56 mm Furniture tube: 127 x 7.1 mm Stainless steel AISI304-318: 114.3 x 5.6 mm Stainless steel AISI308 (food grade): 114.3 x 5.6 mm Soft brass: 139.7 x 8.8 mm Hard copper and aluminium: 139.7 x 8.8 mm Soft copper: 64 x 6 mm Conduit pipe (TAZ): 88.9 x 3.65 mm Mepla, Gebereit and similar: 50 x 4 mm Round steel (S275JO): 90 mm Flat bar (S275JO): 130 x 25 mm upright, 130 x 6 mm Max. bending radius: 700 mm Min. bending radius: 36 mm Min. pipe Ø: 10 mm Max. bending speed: 0 - 0.75 rpm Motor: 3.5 kW Quick-change tooling system Digital bending angle display Springback compensation Accurate slide shoe positioning Foot switch Four hexagonal tool holders (40, 50, 80, and 110 mm) Left and right bending possible Crodeynmr Ujpfx Anuoh Operating manual Tooling on request

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Italy Price: €74,000 Leasing rate: €1,398.60 Working width: 1,350 mm Sheet thickness range (mild steel): 0.5 - 170 mm Abrasive belt dimensions: 1,370 x 2,200 mm Extraction capacity: 4,000 m³/h Extraction connection: diameter 200 mm Compressed air connection: 6 bar Noise level: 78 (+/-2) dB Length: 1,750 mm Width: 2,100 mm Height: 2,180 mm Weight: 2,000 kg EQUIPPED WITH 2 WORKING STATIONS: 1 x ABRASIVE BELT AND 1 x TOP BRUSH UNIT Machine made of stress-relieved steel welded construction for stable and rigid structure. Worktable with motorized height adjustment via 4 synchronized spindles. Independent drive motors for each working station. Extraction hoods inside the machine, one per station. Touch screen for Credsynmwkopfx Anueh * Automatic star-delta switching of main motors * Analog ammeter for each station * Digital sheet thickness display with decimal point tolerance * Material thickness setting (+/- 0.1 mm) * Machine status monitoring with alarm messages FEED SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt available on request. Variable feed speed via frequency inverter, 0.6 to 6.5 m/min. Rubber conveyor belt, oil and temperature resistant. Automatic conveyor belt centering. Side guides to prevent the belt from lifting. Rubber pressure rollers before and after each station, oil and temperature resistant. Idler rollers at the front and rear of the table. 1st WORKING STATION – R Balanced contact roller, anti-oil and anti-heat nitrile rubber coating. Adjustable via eccentric shaft for working position and compensation of abrasive belt wear. Pneumatic cylinders for automatic engagement in working position and lifting during emergency stop. Abrasive belts and/or Scotch-Brite can be used. Motorized adjustment and electronic control of contact roller height. Variable-speed motor with automatic emergency brake. Pneumatic belt tensioning system. Abrasive belt centering system with electronic photo cell. Oscillation adjustment for width and timing. Contact roller adjustment precision: ±0.02 mm Contact roller adjustment speed: 10 m/min Contact roller diameter: 180 mm Rubber roller hardness: 55 Shore Contact roller stroke (grit adjustment) up/down: 8 mm Abrasive belt speed: 3 – 18 m/s Motor power: 11 kW 2nd WORKING STATION – X 2 rows of vertical brushes, 10 rotating clockwise and 10 counterclockwise Oscillating cross movement of the whole group Quick-change system for brushes Brush diameter: 115 mm Number of brushes: 20 pcs Oscillation stroke: 15 mm Rotational motor power: 5.5 kW Rotational speed: 300 – 1000 rpm Oscillation motor power: 0.37 kW Abrasive brush speed: 10.0 m/s OPTIONS AND ACCESSORIES B Group – External horizontal drum brush Ø 150 mm over Scotch-Brite brush: €5,580.00 over wire brush 0.3 mm: €5,900.00 R Group – ABRASIVE BELT Motor 15 kW: €1,060.00 OPTIONS: Return to Sender system (workpiece is discharged to the front): €1,290.00 Conveyor belt with vacuum system, 300 mm wide, 4.0 kW: €4,780.00 2 additional PVC-coated rollers at infeed and outfeed sides: €2,040.00 Tampico brush system for component cleaning, 0.55 kW, Ø 150 mm: €4,5...

Stanje: novo, Stanje: novo Dobavni rok: približno 8 tednov od naročila Država izvora: Turčija Cena: 7300 € Leasing obrok: 140,89 € Tlačna sila: 10 t Hod: 185 mm Maks. zmogljivost upogibanja - konstrukcijsko jeklo: 150x8 mm Miza: 450x900 mm Višina sprejemnega zatiča: 150 mm Premer zatiča: 60 mm Crjdoynmzcjpfx Anush Delovna hitrost: 10 mm/s Povratna hitrost: 10 mm/s Motor: 1,1 kW Delovna višina: 915 mm Dolžina: 900 mm Širina: 450 mm Višina: 1130 mm Teža: 250 kg Nastavitev hoda z digitalnim prikazovalnikom Ročni in avtomatski način delovanja Sprejemni zatiči in orodja kaljeni in brušeni Upogibno orodje Nožno stikalo MOŽNOSTI: Rezila, prebijalna ali cevno-upogibna orodja na zahtevo

Stanje: novo, Stanje: novo Dobavni rok: cca 10 tednov po naročilu Država porekla: Turčija Cena: 10.500 € Leasing obrok: 201,6 € Dolžina upogibanja: 1.050 mm Maks. zmogljivost upogibanja – konstrukcijsko jeklo: 4 mm Premer zgornjega valja: 110 mm Moč motorja: 2,2 kW Dolžina: 1.100 mm Širina: 750 mm Višina: 1.000 mm Teža: 990 kg 3 valji Asimetrična postavitev valjev – s pred-upogibanjem 2 pogonska valja z zavoro na motorju Ročno nastavljanje stranskih valjev Zgornji valj se lahko nagne naprej Obrat naprej/nazaj Stožčasto upogibanje z nagibom zadnjega valja Premični upravljalni pult Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI MOŽNOSTI (CENE NA POVPRAŠEVANJE): utrjeni valji motorizirano nastavljanje stranskih valjev digitalni prikaz pozicije stranskih valjev Crsdpsynm Dkefx Anujh

Stanje: novo, Stanje: novo Dobavni rok: cca 10 tednov po naročilu Država izvora: Turčija Cena: 12.300 € Leasing obrok: 236,16 € Dolžina upogibanja: 1270 mm Največja zmogljivost upogibanja – konstrukcijsko jeklo: 4 mm Premer zgornjega valja: 120 mm Hitrost valjanja: 3 m/min Moč motorja: 2,2 kW Dolžina: 2470 mm Širina: 750 mm Višina: 1000 mm Teža: 1110 kg 3 valji Asimetrična postavitev valjev – s pred-upogibanjem 2 pogonska valja z zavoro motorja Ročno nastavljanje stranskih valjev Odklopni zgornji valj naprej Pogon naprej/nazaj Stožčasto valjanje z nagibanjem zadnjega valja Premični upravljalni pult Crjdoynm Dqopfx Anush Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI MOŽNOSTI (CENE NA ZAHTEVO): Kaljeni valji Motorizirano nastavljanje stranskih valjev Digitalni prikaz položaja stranskih valjev

Stanje: novo, Stanje: novo Dobavni rok: približno 10 tednov od prejema naročila Država izvora: Turčija Cena: 13.200 € Leasing obrok: 253,44 € Dolžina upogibanja: 1270 mm Maks. zmogljivost upogibanja – ogljikovo jeklo: 5 mm Premer zgornjega valja: 140 mm Hitrost valjanja: 3,5 m/min Moč motorja: 2,2 kW Dolžina: 2470 mm Širina: 750 mm Višina: 1000 mm Teža: 1350 kg 3 valji Asimetrična razporeditev valjev – s predupogibom 2 pogonska valja z zavoro na motorju Ročno nastavljanje stranskih valjev Zgornji valj pomičen naprej Tek naprej/nazaj Stožčasto upogibanje z zamikom zadnjega valja Premični upravljalni pult Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI Cedpeynm Dwefx Anujrh MOŽNOSTI (CENE NA ZAHTEVO): Kaljeni valji Motorizirano nastavljanje stranskih valjev Digitalni prikaz položaja stranskih valjev

Stanje: novo, Stanje: novo Dobavni rok: približno 6 mesecev po naročilu Država izvora: Tajvan Cena: 42.600 € Leasing obrok: 813,66 € Dolžina upogiba: 2.035 mm Debelina pločevine (420 N/mm²): 4,5 mm Pogon: hidravlični Maksimalni upogibni kot: 135° Dolžina: 3.300 mm Širina: 1.550 mm Višina: 1.900 mm Teža: 3.200 kg Hidravlični pogon Credpfx Aoynm S Uenuoh NC krmiljenje za predizbiro upogibnega kota Ročno nastavljivo zadnje prislonilo: 600 mm Neprekinjena koničasta letvica 45° Pristavni kotnik: 75 mm Mehanska nastavitev končne lege vpenjalne letve Nastavitev sile vpenjanja Oprema skladno s CE predpisi ALTERNATIVA: Različica AMH-K, z deljeno koničasto letvico 45° MOŽNOST (CENA NA POVPRAŠEVANJE): 2-osno NC krmiljenje s 7" zaslonom na dotik, vključno z motoriziranim zadnjim prislonilom 800 mm (Simbolične fotografije)

Stanje: novo, Stanje: novo Dobavni rok: približno 6 mesecev od oddaje naročila Država izvora: Tajvan Cena: 51.600 € Mesečni obrok ob finančnem lizingu: 975,24 € Dolžina upogiba: 3100 mm Debelina pločevine (420 N/mm²): 3,5 mm Pogonski sistem: hidravlični Maksimalni kot upogiba: 135 ° Dolžina: 4300 mm Širina: 1770 mm Višina: 1890 mm Teža: 4520 kg Hidravlični pogon NC krmilnik za predizbiro kota upogiba Ročni zadnji omejevalnik: 600 mm Neprekinjena vodilna letev: 45° Crodpfsynm Ucjx Anujh Prednji kot: 75 mm Mehanska nastavitev končnega položaja objemalne čeljusti Nastavitev objemalne sile Oprema v skladu s standardi CE ALTERNATIVNO: Verzija AMH-K, z DELJENO vodilno letevjo 45° OPCIJA (CENA NA ZAHTEVO): NC krmilnik z 2 osmi in 7-palčnim zaslonom na dotik, vključno z motoriziranim zadnjim omejevalnikom 800 mm (Simbolične fotografije)

Stanje: novo, Stanje: novo Dobavni rok: približno 6 mesecev od oddaje naročila Država izvora: Tajvan Cena: 61.800 € Mesečni obrok ob financiranju (leasing): 1.168,02 € Dolžina upogiba: 4010 mm Debelina pločevine (420 N/mm²): 3,5 mm Pogon: hidravlični Maks. kot upogiba: 135 ° Dolžina: 5600 mm Širina: 1800 mm Višina: 2050 mm Teža: 6100 kg Hidravlični pogon NC krmiljenje za prednastavitev kota upogiba Ročni zadnji oporni element: 600 mm Neprekinjena konična tirnica 45° Prednji kot: 75 mm Mehanska nastavitev končnih položajev objemne čeljusti Nastavitev sile objema Oprema v skladu s predpisi CE ALTERNATIVNO: Verzija AMH-K, z DELJENO konično tirnico 45° OPCIJA (CENA NA ZAHTEVO): NC krmiljenje z 2 osmi, s 7-palčnim zaslonom na dotik, vključno z motoriziranim zadnjim opornim elementom 800 mm (Simbolične fotografije) Credpfx Ajynm U Asnueh

Stanje: novo, Stanje: novo Dobavni rok: približno 6 mesecev od oddaje naročila Država izvora: Tajvan Cena: 62.500 € Mesečni obrok ob financiranju (leasing): 1.181,25 € Dolžina upogiba: 3100 mm Debelina pločevine (420 N/mm²): 2 mm Pogon: hidravlični Maksimalni kot upogiba: 135° Crsdpjynnaasfx Anueh Motor: 5 kW Dolžina: 4370 mm Širina: 1770 mm Višina: 1790 mm Z NAVPIČNO POMICNO GORNJO PREČKO ZA UPORABO RAVNIH IN VISOKIH GORNJIH PREČK Hidravlični pogon NC krmiljenje za prednastavitev kota upogiba Ročni zadnji opornik: 600 mm Neprekinjena ravna gornja prečka: 45° Mehanska nastavitev izbočenja upogibnih ram Nastavitev sile stiskanja Navpična pomična gornja prečka Oprema v skladu s predpisi CE Možnosti (cene po povpraševanju): razdeljena gornja prečka, višina 100 mm motoriziran zadnji opornik 800 mm z nadzorom na dotik (2 osi)

Stanje: novo, Condition: new Delivery time: approx. 12-14 weeks from order Country of origin: Turkey Price: €249,800 Punching force: 30 t Working area: 2500 x 1250 mm X-axis travel (+ repositioning): 2500 mm Y-axis travel: 1250 mm X-axis speed: 116 m/min Y-axis speed: 80 m/min Combined X+Y speed: 140 m/min Stroke: 40 mm Max. stroke rate (in 1 mm increments, 1 mm sheet thickness): 1200 strokes/min Max. stroke rate (in 25 mm increments, 1 mm sheet thickness): 425 strokes/min Max. stroke rate for marking: 3200 strokes/min Max. cutting capacity with fixed tool station (steel): 6 mm Max. cutting capacity with fixed tool station (stainless steel): 3 mm Max. cutting capacity with index station (steel): 3 mm Max. cutting capacity with index station (stainless steel): 1.5 mm Number of stations: 27 Positioning accuracy: 0.1 mm Repeat accuracy: 0.05 mm Tool changer rotation speed: 22 rpm Auto-index rotation speed: 150 rpm Max. workpiece weight: 120 kg Table height: 940 mm Air pressure: 6 bar Max. punching diameter (D station): 88.9 mm Motor power: 15 kW Length without light barriers: 5750 mm Length with light barriers: 6800 mm Width without light barriers: 5360 mm Width with light barriers: 7360 mm Height: 2310 mm Weight: 12,960 kg CNC control: SIEMENS Sinumerik 840 D SL CAD-CAM software Programming directly on the control unit Remote maintenance module Automatic positioning of the clamps Network connection Automatic tool lubrication UPS for control system Mobile scrap container Brush table Oil cooler USB port Foot pedal Webcam for service Repositioning device for X-axis Custom tools for D index station Manual nesting Tool changer (27 stations without tools and holders): 11 x A-station fixed: 0.8–12.7 mm 11 x B-station fixed: 12.8–31.7 mm 2 x C-station fixed: 31.8–50.8 mm 1 x D-station fixed: 50.9–88.9 mm 3 x D-station index: 50.9–88.9 mm Light barriers Credpfx Anjynnayjush Machine and equipment comply with CE regulations PRICE FCA TURKEY

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €15,900 Lease rate: €305.28 Shaft diameter: 50 - 60 mm Top roller diameter: 180 mm Roller diameter: 180 mm Lower roller diameter: 180 mm Codpfx Aeyn R E Senujrh Driven rollers: 3 Motor power: 3.75 kW Speed: 6 m/min Flat bar upright (cross-section / min. diameter): 60x10 mm / 500 mm; 20x5 mm Flat bar flat (cross-section / min. diameter): 80x20 mm / 500 mm; 50x5 mm Square bar (cross-section / min. diameter): 32x32 mm / 400 mm; 12x12 mm Round bar (cross-section / min. diameter): Ø 35 mm / 350 mm; Ø 10 mm Tube (cross-section / min. diameter): Ø 60x2 mm / 600 mm; Ø 15 mm Rectangular tube upright (cross-section / min. diameter): 50x25x3 mm / 450 mm; 20x1 mm Square tube (cross-section / min. diameter): 45x3 mm / 600 mm; 20x2 mm Angle iron legs out (cross-section / min. diameter): 60x60x6 mm / 650 mm; 30x3 mm Angle iron legs in (cross-section / min. diameter): 50x50x5 mm / 550 mm; 30x3 mm UPN legs out (cross-section / min. diameter): UPN 80 / 600 mm; UPN 30 / ... UPN legs in (cross-section / min. diameter): UPN 65 / 600 mm; UPN 30 / ... IPN flat (cross-section / min. diameter): IPN 80 / 600 mm Length: 1200 mm Width: 850 mm Height: 1200 mm Weight: 955 kg 3 driven rollers (brake motor) Hardened drive shafts Hydraulic adjustment of the two lower rollers Hardened universal rollers Lateral straightening rollers, manually adjustable in 3 axes Usable in horizontal and vertical position Digital display for lower roller positions Machine and equipment compliant with CE regulations Operating manual in GERMAN and ENGLISH

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €62,600 Leasing rate: €1,183.14 Bending length: 2,050 mm Max. bending capacity - steel: 13 mm Max. plate thickness with pre-bending - steel: 10 mm Max. plate thickness without pre-bending at D=5x top roll: 13 mm Max. plate thickness without pre-bending at D=1.5x top roll: 10 mm Max. plate thickness with pre-bending at D=5x top roll: 10 mm Max. plate thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 820 mm Motor power: 11 kW Length: 3,830 mm Width: 1,160 mm Height: 1,200 mm Weight: 5,000 kg 4 rolls PLC Fully hydraulic drive for top and bottom rolls (for bending capacity ≥ 30 mm, all four rolls driven via planetary gear) Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Credpfx Aeypbqbsnush Hydraulic drop-end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in compliance with CE regulations OPTIONS: Upper and side sheet supports NC control IMPORTANT POINTS FOR CONICAL BENDING: Max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €70,300 Leasing rate: €1,328.67 Bending length: 3,100 mm Max. bending capacity – mild steel: 8 mm Max. plate thickness without prebending at D=5x top roll: 8 mm Max. plate thickness without prebending at D=1.5x top roll: 6 mm Max. plate thickness with prebending at D=5x top roll: 6 mm Max. plate thickness with prebending at D=1.5x top roll: 5 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 825 mm Motor power: 11 kW Length: 4,880 mm Width: 1,160 mm Height: 1,200 mm Weight: 6,450 kg 4 rolls PLC Fully hydraulic drive for top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gear Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment according to CE regulations OPTIONS: Top and side plate supports NC control Credpfeypbqnsx Anujh IMPORTANT POINTS FOR CONICAL BENDING: The max. plate thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Zustand neu Crsdeyq Su Tjpfx Anueh Lieferzeit ca. 2 - 4 Wochen ab Auftrag Ursprungsland Niederlande Preis 1063 € Rohrdurchmesser 1 1/4" 42,4, 1 1/2" 48,3 mm Max. Wandstärke Baustahl 3 mm Max. Wandstärke Edelstahl 2.5 mm Gewicht 15 kg Mit dem Rohrausklinker AL3 können Sie Rohre mit den Außendurchmessern Ø42.4 (1 1/4") und Ø48.3 (1 1/2") ausklinken. Die Geräte mit Handbedienung sind einfach an der Wand zu befestigen. Mit ALMI Rohrausklinkern gehört Feilen oder Fräsen von Rohren der Vergangenheit an. Der große Vorteil gegenüber anderen Ausklinkwerkzeugen ist, dass mit nur einem Satz mehrere Durchmesser ausgeklinkt werden können, ohne erst Teile wechseln zu müssen. Die Vorteile auf einen Blick: hohe Produktivität, geringe Investition, einfache und schnelle Bedienung, mehrere Durchmesser sofort verfügbar und ideal für doppelte Eckverbindungen.

Stanje: novo, Stanje novo Dobavni rok cca. 2–4 tedne od naročila Država izvora Nizozemska Cena 811 € Premer cevi: 3/4" 26,9 mm, 1" 33,7 mm, mm Najv. debelina stene ogljikovega jekla: 3 mm Najv. debelina stene nerjavečega jekla: 2,5 mm Teža: 8 kg Z izsekovalcem cevi AL1 lahko izsekavate cevi z zunanjimi premeri Ø26,9 (3/4"), Ø33,7 (1") in Ø42,4 (1 1/4"). Ročno upravljane naprave so enostavne za uporabo na steni – z izsekovalci cevi ALMI je piljenje ali rezkanje cevi stvar preteklosti. Velika prednost v primerjavi z drugimi orodji je, da lahko z enim kompletom izsekate več premerov, ne da bi morali menjati dele. Prednosti na kratko: visoka produktivnost, nizka investicija, enostavno in hitro upravljanje, več premerov takoj na voljo ter idealno za dvojne kotne spoje. Cjdpfx Anjyq Svdsuorh

Stanje: novo, Condition: new Delivery time: approx. 2 - 4 weeks from order Country of origin: Netherlands Price: €5,932 Lease rate: €114.49 Pipe diameter: 3/4" 26.9 mm, 1" 33.7 mm, mm Max. wall thickness for construction steel: 5 mm Credpoyui Sqofx Anujh Max. wall thickness for stainless steel: 3 mm Weight: 93 kg With the AL1-2U pipe notcher, you can notch pipes with outside diameters of Ø 26.9 (3/4"), Ø 33.7 (1"), Ø 42.4 (1 1/4"), Ø 48.3 (1 1/2"), Ø 60.3 (2") and PIPES FOR ZINC OUTLETS WITH OUTSIDE DIAMETERS FROM Ø22 TO Ø76. Do you frequently notch pipes? Then the AL1-2U pipe notcher with a 2.2 kW electric motor is the right solution for you! The motor forms a single unit with the special eccentric shaft that drives the notching tool. Furthermore, the motor is equipped with an on/off switch with undervoltage protection and a safety cover. Advantages at a glance: high productivity, low investment, simple and quick operation, multiple diameters immediately available, and ideal for double corner joints.

Stanje: novo, Condition: New Delivery time: approx. 2 - 4 weeks from order Country of origin: Germany Price: €3303.85 Drilling capacity in structural steel: 6 mm Mount: B12 Throat: 220 mm Speeds: 100 - 10,000 rpm Motor: 0.54 kW Tapping capacity: M5 Length: 452 mm Width: 700 mm Height: 1130 mm Weight: 44 kg Quill stroke: 60 mm Distance spindle - table: 140 - 315 mm Table: 300 x 250 mm Column diameter: 70 mm Credpfjy Hf Rhsx Anueh Continuous/normal drilling capacity: 6/8 (in E335/ST60) Thread cutting device Control panel with OLED display Robust, high-quality drill head cover with ergonomically inclined front LED lighting Quick-adjustable and ergonomic drilling depth stop Infinitely variable speed control via central rotary knob Emergency stop button Thermal overload protection Spindle stop Drill guard with electrical interlock Connection cable with Schuko plug 3-year warranty for single-shift operation OPTIONS (PRICES ON REQUEST): Machine cabinet with door and drawer Drill package 2 (vice & quick-release drill chuck)

Stanje: novo, Zustand neu Lieferzeit ca. 2 - 4 Wochen ab Auftr Ursprungsland Deutschland Preis 2792.28 € Bohrleistung in Baustahl 10 mm Aufnahme B 16 Ausladung 220 mm Drehzahlen 250 - 3000 U/min Motor 0,45 kW Länge 320 mm Breite 520 mm Höhe 820 mm Gewicht 44 kg Pinolenhub 60 mm Abstand Spindel - Fuß 140 - 315 mm Tisch 300 x 250 mm Säulendurchmesser 70 mm Dauer-/Normalbohrleistung 10/12 (in E335/ST60) Robuste, qualitativ hochwertige und geneigte Rotations-Haube für einfaches Ablesen der Drehzahl LED-Beleuchtung Schnell verstellbarer und ergonomischer Bohrtiefenanschlag Stufenlose Drehzahlregelung über mittigen Drehknopf NOT-AUS-Schlagtaster Thermischer Überlastungsschutz Unterspannungsauslöser Bohrschutz mit elektr. Absicherung Anschlußkabel mit Schuko-Stecker (1,2 m) 3 Jahre Garantie bei Einschichtbetrieb Art. - Nr. 217.410 mit Zwischentisch und Tischhöhenverstellung über Zahnstange OPTIONEN: Maschinenschrank mit Tür und Schublade Crodoy Hf Rzjpfx Anuoh Bohrpaket 2 (Schraubstock & Schnellspannbohrfutter)

Stanje: novo, Leto izdelave: 2025, Stanje: novo Leto izdelave: 2025 Številka zaloge: 090086 Dobavni rok: takoj, možnost vmesne prodaje Država porekla: Turčija Cena: 7.400 € Leasing obrok: 142,82 € Na zalogi: 1 Dolžina rezila: 197 mm Debelina pločevine (420 N/mm²): 4 mm Debelina pločevine (600 N/mm²): 2 mm Število hodov: 20 1/min Kot: 90° Motor: 4 kW Dolžina: 890 mm Širina: 780 mm Višina: 1.115 mm Teža: 550 kg Hidravlični pogon Samodejna prilagoditev reže reza 2 pritisna elementa 2 kotno nastavljiva prislona Cjdpfx Anowiqmmjusrh Zaščita iz pleksi stekla Nožno stikalo Posoda za odpadke Oprema po smernicah "CE" Navodila za uporabo v nemščini in angleščini

Stanje: rabljeno, Leto izdelave: 1999, barvni kanali: 2, Heidelberg SM 74-2 P. - Letnik 1999; - 57 milijonov natisov; - vlaženje z alkoholom, z Baldvinovim sistemom; - pranje valjev za barvo; - pranje gumijastega in cilindričnega valja; - zračni nož; - sistem za nanos prahu; Cedpfx Anszlgpyeujrh - perfektor (2+0; 1+1); - brez poškodb na cilindrih.

Stanje: rabljeno, Leto izdelave: 1973, Lokacija skladišča: Nattheim Codpfx Anovvkt Ujusrh

Stanje: rabljeno, Leto izdelave: 2018, 1 piece CNC-CONTROLLED BORING, GLUING, AND DOWEL INSERTION MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro), 400V, 3Ph, 50Hz, complete in standard configuration with: - Carriage with linear guide, consisting of: - 1 pc. single-spindle horizontal boring unit, motor 1.1 kW, selectable spindle speed via operator software (3000/5000/8000 rpm) - 1 pc. exhaust, gluing, and dowel insertion station in reinforced design for dowels Ø 8 mm, dowel length 30 mm - Fully automatic, electronically controlled central lubrication system - X-axis NC controlled, with working length of 1300 mm, maximum traverse speed 78 m/min - Z-axis, position via table support programmable from 5–40 mm, option for NC-controlled Z-axis - Programmable dowel projection depth from 7–20 mm, option for NC-controlled Y-axis - Drilling depth from 0–35 mm (with drill bit length 70 mm) is set automatically with dowel projection - Closed gluing system with 6 bar glue pressure via glue nozzle, suitable for adhesives with viscosity of 150 to 350 mPas - Infinitely variable glue quantity control via operator software - Selector switch GLUE/WATER for flushing the glue system; each with 1 stainless steel tank for 5 kg glue and 5 l water - Indicator light for glue residual level in glue container - 1 pc. left, 1 pc. right, and 1 pc. central side stop (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT control with: - Integrated industrial PC, inkl. Soft PLC Beckhoff TWINCAT, operating temperature range 0–50°C, TFT industry display 15" resistive touch, 1024 x 768 resolution, CPU 2 GHz, 256 MB RAM, 2x network adapters, IDE hard drive, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - Programming via menu-guided user software, freely programmable drilling distances with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 4 work areas assignable with different programs, graphical workpiece representation, parametric programming, zero-point shift, programmable work lists, error diagnosis in plain text OPTIONS: - 1 electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle - 4 additional vertical angled clamping cylinders 10° with holders (total 8 clamping cylinders) - Surcharge for machine bed length 1800 mm with working length 1800 mm - Surcharge for: 1 horizontal drilling unit, 1.5 kW motor, with multi-spindle boring head with 3 individually selectable drilling spindles, 32 mm pitch along X-axis, spindle speed 3000 rpm (standard working length not reduced) - 1 NC-controlled Y-axis, with ball screw and dynamic traverse speed 300 mm/sec. Programmable via software: dowel projection 7–30 mm and drilling depth 0–42 mm (with drill bit length 77 mm) for vertical drilling unit from ABOVE; Y-axis position 5–42 mm - Surcharge for NC-controlled Y-axis, position 5–62 mm instead of 5–42 mm - Surcharge for: 1 vertical drilling unit from ABOVE, 1.5 kW motor, with multi-spindle boring head with 3 individually selectable drilling spindles, 32 mm pitch along X-axis, spindle speed 3000 rpm, Y-axis position 5–42 mm, workpiece length (Y) min. 130 mm (standard working length not reduced) - 1 NC-controlled Z-axis, with K... Codpsxwaz Hsfx Anuerh

Stanje: rabljeno, Leto izdelave: 2016, TECHNICAL DATA AXES Max. Workpiece Dimensions X-Y-Z mm: 3050 x 800 x 50 Min. Workpiece Dimensions X-Y-Z mm: 300 x 90 x 10 Working Area Drilling/Grooving mm: 0 x 800 / 0 x 800 X-Axis Stroke mm: 750 Max. Traverse Speed X-Y Axes m/min: 25 DRILLING UNIT Vertical Spindles: - Number: 7 (4X-4Y, one shared) Horizontal Spindles (along Y-axis): - Number: 2 (1+1) Horizontal Spindle (along X-axis): - Number: 1 Fixed Grooving Saw (Direction): X Saw Blade Diameter mm: 100 Max. Saw Blade Thickness mm: 5 Motor Power kW (HP): 1.5 (2) Spindle Speed rpm: 3350 Saw Blade Speed rpm: 4300 INSTALLATION Power Supply V (Hz): 380 / 400 (50/60) Installed Power kVA: 4.5 Compressed Air Requirement bar: 6 Compressed Air Consumption Nl/cycle: 90 Extraction Requirement m³/h: 1200 Extraction Air Speed m/sec: 20 Extraction Port Diameter mm: 80+80 F10L Drilling Unit Includes: - 7 independent vertical spindles - Drill holder D10 mm - Distance between spindles: 32 mm - 2 horizontal drilling heads: 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill holder D10 mm) - Speed: 3350 rpm - 1 integrated saw unit in X (max. diameter 100 mm) - Saw blade speed: 4300 rpm - Motor power: 1.5 kW - Vertical pneumatic stroke per spindle: 70 mm - Horizontal pneumatic stroke of drilling unit Workpiece Positioning and Drive of the Working Unit A CNC-controlled vacuum suction cup clamps and positions the workpiece sequentially under the working unit during machining. Movement along the X and Y axes is via THK rails with transmission on reinforced toothed belts. Movement in the Z axis is pneumatic on ball bushing guides, with stops adjustable via the end position. Positioning of the working units is via DC motor technology and drives. CNC CONTROL The control system is specifically designed for use in drilling and milling machines. - CN - 7" color display with touchscreen - Alphanumeric keypad - Self-diagnosis and any faults or errors displayed in the operator's language Cjdpfxsvvi I Rs Anuorh Programming - Programmed via CN - Automatic optimization of drilling operations - Option for plate zero-point shift - Option to save and import drilling programs via USB dongle - Option to import drilling programs from external CAD-CAM software Configuration - User interface in the same language as the operating manual - Graphic display of aggregate configuration Vacuum Suction Cup "B-Power" vacuum suction cup with dual vacuum connection, recommended for highly porous panels (e.g., MDF light). Machine Operating Interface Software: Xilog Maestro USB Hardware and Software Requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min.; multicore processor recommended - Memory: 1GB min., 2GB recommended - Free disk space: 5GB - Graphics card: OpenGL compatible (The package includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphical programming - Supported programming with graphical and syntax aids for drilling operations - Ability to create and save machining macros Integrated Additional Functions - Self-diagnosis and error reporting in the operator's language - User interface in