Wmw- Fritz Heckert Keilschuh nakup rabljenega (1.280)

Stanje: rabljeno, Teža: 295 kg Višina konic: cca 180 mm Godpfx Aasykvbde Ueug Dimenzije Dolžina: cca 480 mm Širina: cca 450 mm Višina: 280 mm Teža: 110 kg

Stanje: novo, Type / Model: for WMW drilling machine Total length: 1,140 mm Gedpfobptmdex Aa Ujug Bar diameter: 50 mm Length of adapter sleeve: 190 mm Sleeve diameter: 78 mm Mount: MT 5 Condition: apparently unused Weight: Dimensions: 1,140 x 78 mm

Stanje: rabljeno, Swing diameter over support 800 mm Control Siemens 802D Gedev H Etdspfx Aa Uoug Max. turning diameter 2000 mm Centre height 1000 mm

Stanje: rabljeno, Leto izdelave: 2010, Dolžina mize: 2000 mm Godpfx Asztrvnsa Ueug Širina mize: 1800 mm Nosilnost mize: 12,5 t Dolžinska nastavitev: 1250 mm Dolžinski pomiki mize: 0,63–2000 mm/min Višina mize: 920 mm Širina utora: 36 mm Krmilni sistem: moviaxes SEW Skupna potrebna moč: 10 kW Masa stroja: približno 7,5 t Potreben prostor: približno 3,7 x 2,1 x 1 m

Stanje: rabljeno, Leto izdelave: 1997, Pressure: 630 t Stroke: 300 mm Strokes per minute: 10–75 spm Table size: 3600 x 2200 mm Passage width: 4000 mm Ram area: 3600 x 2200 mm Lateral frame passage: 2000 mm Ram adjustment: 150 mm Installation height (stroke down, adjustment up): 1000 mm Operating voltage: 400 V Height above floor: 7600 mm Press pit depth: 2500 mm Total power requirement: 160 kW Machine weight: approx. 225 t Space requirement: approx. 750 m² Guodpfswx R Rdsx Aa Uog Complete blanking line with decoiling/feeding system and destacking system. System suitable for strip width 300–1600 mm and strip thickness 0.5–3 mm. The machine is equipped with two sliding tables that can be swapped out from the front. The destacking unit is positioned laterally and has two pallet stations. Destacking can also be performed to the rear with 2 pallets. 3-fold coil feeding, each for 25 t; Schnutz decoiler, strip infeed, straightening machine, and roll feeder.

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), Horizontal machining center Starrag Heckert Model HEC 1600 Athletic, in ready-for-operation condition (2 units available) Pallet size: 1250 x 1600 mm Max. pallet load: 8,000 kg Number of pallets: 25 pcs Fastems system Table indexing: B-axis, 0.001° Table cross travel (X): 2,800 mm Spindle vertical travel (Y): 2,200 mm Column longitudinal travel (Z):2,100 mm Boring spindle axial travel (W): 740 mm Feed X/Y/Z: 1 – 40,000 mm/min Rapid traverse X/Y/Z: 40 m/min Rotary table: 8 rpm Max. rotary diameter: 3,000 mm Spindle taper: ISO 50 Spindle bearing diameter: 200 mm Spindle motor output: 37 kW Spindle speed: 20 – 2,500 rpm Boring spindle diameter: 150 mm ATC (automatic tool changer): 80 positions CNC control: Siemens Sinumerik 840D Operating hours: Spindle: 22,200 hours Accessories: - Hexagon wireless measuring probe - Coolant unit with vacuum rotary filtration system - High-pressure coolant supply through spindle - Electrically operated Visiport clear-view window Guodpfeguk Nhox Aa Ueg - Laser tool breakage control in work area - Cylinder path interpolation - ARTIS tool and process monitoring system Machines without Fastems = without pallet changers. - Pallet changer unit can be supplied by Starrag Heckert. Year of manufacture: 2007 (See also further offers from this advertiser)

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), Horizontal Machining Center Starrag-Heckert HEC 1600 Athletic In operational, ready-to-use condition Pallet size: 1250 x 1600 mm Maximum pallet load: 8,000 kg Number of pallets: 25 pcs (Fastems system) Table indexing: B-axis 0.001° X-axis traverse: 2,800 mm Y-axis (spindle vertical): 2,200 mm Z-axis (column longitudinal):2,100 mm W-axis (boring spindle axial): 740 mm Feed rate X/Y/Z: 1 – 40,000 mm/min Rapid traverse X/Y/Z: 40 m/min Rotary table speed: 8 rpm Maximum swivel diameter:3,000 mm Spindle taper: ISO 50 Spindle bearing diameter: 200 mm Spindle drive motor: 37 kW Spindle speed: 20 – 2,500 rpm Boring spindle diameter:150 mm ATC: 80-tool magazine CNC control: Siemens Sinumerik 840D Gedpfeguk I Ijx Aa Ujug Operating Hours Spindle: 21,400 hours Accessories - Hexagon wireless measuring probe - Coolant unit with vacuum rotary filtration system - High-pressure coolant through spindle - Electrically operated clear-view window (Visiport) - Laser tool breakage detection in work area - Cylindrical path interpolation - Tool and process monitoring system – ARTIS Machine without Fastems = without pallet changers. - Pallet changer unit available from Starrag Heckert as an option. Year of manufacture: 2007 (See also other listings from this seller)

Leto izdelave: 1978, stanje: pripravljen za uporabo (rabljen), Na voljo je valjčna profilirna linija Instytut Obróbki Plastycznej (Poljska) za plastično preoblikovanje kovin. Število valjčnih postaj: 12, premer gredi: 50 mm, največja širina profila: 300 mm, največja debelina profila: 2 mm, skupne dimenzije linije X/Y: ca. 20 m/4 m. Vključno z avtomatsko odrezno enoto z inkrementalnim merjenjem dolžine ter odlagalnim odvijalcem. Ogled na lokaciji je možen. Guedpjzhw Swofx Aa Uog

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1984, Pomik X/Y/Z: 1600mm/1000mm/1100mm, nosilec obdelovanca (palete) X/Y: 800mm/800mm-1000mm, čas menjave: 38s, obseg vrtenja mize: 360°, največja nosilnost mize: 2000kg, podajanje: 10m/min, hitri pomik: 15m/min, moč vretena: 32kW, število mest za orodja: 50, vpenjanje orodja: ISO50, število vrtljajev: 4500U/min. Dimenzije stroja X/Y: 5800mm/5200mm, teža: pribl. 25000kg. Dokumentacija je na voljo. Ogled na lokaciji je možen. Gsdpfx Asxl Elyoa Usug

Leto izdelave: 1994, stanje: pripravljen za uporabo (rabljen), A total of four WMW/Werkö saw blade grinding machines are available. Saw blade diameter min./max.: 250 mm / 1450 mm, grinding wheel diameter: 250 mm, speed: 2500 rpm, tooth pitch: 42 mm, grinding spindle swivel range: +/-45°, machine dimensions X/Y/Z: approx. 850 mm / 1000 mm / 1800 mm, weight: approx. 1100 kg. Documentation is available. On-site inspection is possible. Godov Exthspfx Aa Uoug

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1982, Premer vrtalne vretena: 130 mm, vpenjalo orodja: SK50, centriranje: 500 mm, hodi X/Y/Z: 250 mm/160 mm/380 mm, hodi W/U: 1000 mm/320 mm, pomik: 2 m/min, hitri pomik: 5 m/min, največji premer vrtanja/čeljenja: 800 mm/1400 mm, navor vrtalne vretena/čelilnega podporca: 3100 Nm/6150 Nm, dimenzije vpenjalne plošče X/Y/Z: 3500 mm/1750 mm/350 mm, teža: ca. 30000 kg, krmiljenje: Bosch. Vključno z kotno glavo, podaljškom, stožčastim držalom za orodje za SK50 (brez orodij), 4 x plošče dimenzij 1080 mm/2000 mm in izvrtalno napravo. Dokumentacija je na voljo. Ogled na lokaciji je mogoč. Guedpfx Aaeyttw Ue Ujg

Leto izdelave: 1965, stanje: pripravljen za uporabo (rabljen), A lead and feed screw lathe WMW, completely overhauled in 1993 and unused since, is available. Centre distance: 1600 mm, turning length: 1600 mm, turning diameter: 250 mm, swing diameter over bed/cross slide: 450 mm/250 mm, tool post area X/Y: 140 mm/140 mm, tool cross-section: 25 mm/25 mm. Spindle speed: 2240 rpm, spindle bore: 45 mm, faceplate diameter: 450 mm, tailstock quill stroke: 160 mm, max. workpiece weight: 800 kg/1250 kg, max. journal diameter: 60 mm. Includes taper turning device, coolant system, and four-way tool holder. Documentation available. On-site inspection possible. The machine has not been used since its overhaul in 1993. Guedpfx Aevy E A Soa Ujg

Leto izdelave: 1985, stanje: pripravljen za uporabo (rabljen), V ponudbi je konvencionalni okrogli brusilni stroj. Nastavljen na ZRO 40,10, zaščita: IP54/IP32, krmiljenje: Erfurt electronic. Opremljen z integrirano krmilno omarico, dovajanjem obdelovanca, ločeno upravljalno konzolo, hladilnim sistemom. Teža: pribl. 380 kg, skupne mere X/Y/Z: pribl. 2500 mm/1800 mm/2000 mm. Ogled možen po dogovoru. Gjdsy Ulm Sepfx Aa Usug

Stanje: pripravljen za uporabo (rabljen), Širina zobnika: 600 mm, modulni razpon: 2-16, dimenzije rezkalnika X/Y: 240 mm/280 mm, premer mize: 1020 mm, hitrost vrtenja: 200 vrt/min, zasuk: +/-45°, maksimalni premer zobnika z/brez protiopore: 1250 mm/800 mm. Dimenzije stroja X/Y/Z: cca 4500 mm/2100 mm/3300 mm, teža: cca 16.200 kg. Ogled na lokaciji je možen. Gsdsy Hk T Iopfx Aa Ueug

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Na voljo je stroj za obdelavo koncev cevi Fritz Gross. Priključna moč: 11kW, največji premer cevi: 60mm, teža: cca 1500kg. Ogled na lokaciji je možen. Godpfxjy Nm Uye Aa Ujug

Leto izdelave: 1983, stanje: pripravljen za uporabo (rabljen), Swing diameter over bed/cross-slide: 630mm/340mm, turning length: 2000mm, center height: 290mm, spindle bore: 70mm, spindle speed: 1180 rpm, chuck: 400mm wedge bar chuck, tailstock: MT5, total power requirement: 15kW, machine dimensions (L/W/H): approx. 5000mm/1350mm/1500mm, weight: approx. 4500kg. Includes 2 x 340mm steady rests, 2 x medium steady rests, faceplate with diameter 630mm, 2 x faceplates with T-slots, various tool holders, steady rest box, tool cabinet with additional tools, Heidenhain position display and 400mm wedge bar chuck. Documentation available. On-site inspection possible. Gedpsu Av E Hjfx Aa Uoug

Stanje: rabljeno, Dolžina postelje: 4500 mm, nadzorna napetost: 220 V, delovna napetost: 380 V, nazivni tok: 110 A, nazivni tok varovalke z zamudo: 125 A, priključna moč: 58 kW, teža: 35 t, opremljeno z vodilom, napenjalnim mehanizmom, zunanjim elektromotorjem za vrtenje valja, nadzorno ploščo, odlagalno mizo, petimi vodilnimi valji in dodatno opremo. Možen je ogled na kraju samem. Gsdpfx Aaszulg Ne Ujug

Stanje: pripravljen za uporabo (rabljen), Največja višina: 450 mm, razdalja med centri: 3000 mm, varovalka: 630 A, nazivni tok: 46 A, nadzorna napetost: 220 V, delovna napetost: 380 V, frekvenca: 50 Hz, priključna moč: 22,5 kW, teža: 6,1 t, z vpetjem s štirimi čeljustmi (premer: 800 mm), podpornim vretenom, pomičnim vretenom in tremi vodilnimi ležaji. Ogled na licu mesta je možen. Gedpezukufofx Aa Ujug

Stanje: pripravljen za uporabo (rabljen), Varovalka: 100 A, nadzorna napetost: 220 V, delovna napetost: 380 V, priključna moč: 30,4 kW, teža: 14,4 t, opremljeno s štirimi čeljustmi (premer: 900 mm), vrtilnim centrirnim orodjem, vretenom, tremi vodilnimi ležaji in upravljalno enoto. Na voljo je možnost ogleda na lokaciji. Gedpfjzukt Ijx Aa Uoug

Stanje: rabljeno, Leto izdelave: 1986, Stroj: TC800 Serijska številka: 25133 Leto izdelave: 1986 Krmiljenje: Sinumerik System 8. Orodni držalo: SK50 Pomik X: 1600 / Y: 1000 / Z: 1100 mm Optični merilni sistem v oseh X, Y, Z 2 paletni mizi: površina 800x800 mm Gjdpfex Eyvpex Aa Ujug Sistem za menjavo palet Orodni magazin: 60 orodij Napajanje: 380V 50Hz 55kW.

Stanje: rabljeno, Leto izdelave: 1986, Stroj: TC800 Serijska številka: 25132 Leto izdelave: 1986 Krmiljenje: Sinumerik System 8 Gjdpfx Aasx Eyt Uj Ujug Orodni vpenjalni stožec: SK50 Pomik: X: 1600 mm Y: 1000 mm Z: 1100 mm Optični merilni sistem na oseh X, Y, Z 2 paletni mizi, površina: 800x800 mm Sistem za menjavo palet Orodni magazin: 60 orodij Napajanje: 380V 50Hz 55kW.

Stanje: pripravljen za uporabo (rabljen), WMW stacionarna vrtalna naprava IIK 20 - Vrtalna zmogljivost: 20 mm - Število vrtljajev vretena: 95 / 150 / 190 / 300 / 380 / 600 / 760 / 1200 vrt/min - Število vrtljajev: 8 - Prestavna enota z dvema ročicama (A/B) - Ročni pomik - Vrtenje v desni/levi smeri - Naprava za hlajenje Gusdpfsztfdfox Aa Ujg - Luč na stroju - V višino nastavljiva in vrtljiva vrtalna miza s T-utori - Masivna izvedba iz sive litine - Trifazni motor Mere: D x Š x V 0,9 x 0,8 x 1,7 metra / Teža 420 kg Pridržujemo si pravico do sprememb / napak.

Stanje: pripravljen za uporabo (rabljen), Pressing force: 1,600 kN, throat depth: 450 mm, installation height: 560 mm, ram stroke: 8–160 mm, control system: SCHMERSAL SEPG 05.3.2.0.22/95, weight: 16.2 t, including documentation. Gujdpfshz Ua Sox Aa Uog

Stanje: pripravljen za uporabo (rabljen), Weight: 2.2 t, including documentation. Guodpfx Aomqly Uoa Usg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Swing diameter: 400 mm O F F E R We can offer you the following, subject to prior sale and errors, ex stock, without obligation: WMW - GLAUCHAU Universal Internal Cylindrical Grinding Machine with Face Grinding Device Type: SI 6/1 AS-N x 315 Year of manufacture: 1991 _____ Internal grinding diameter range: 40 - 400 mm Maximum grinding depth: 315 mm Maximum external cylindrical grinding diameter: 400 mm Maximum workpiece weight: 630 kg Workpiece swing diameter with / without chuck guard: 500 / 600 mm Centre height above table: 360 mm 16-step workpiece spindle speeds: 40 – 400 rpm Workpiece spindle bore, approx.: 53 mm Workpiece headstock swiveling max.: 30° Workpiece headstock cross adjustment, max.: 400 mm Grinding spindle stock r-feed: 70 mm Grinding spindle stock cross adjustment, approx.: 100 mm Guedjxyllvspfx Aa Usg Grinding head infeed, automatic intervals: 0.001 – 0.025 mm/stroke Grinding head infeed, continuous: 0.1 – 1 mm/min Table stroke, max.: 630 mm Table speed infinitely variable: 0.1 – 8 m/min (10 m/min) Distance between workpiece headstock and grinding spindle, max.: 1,250 mm Grinding spindle stock adjustment on table: 520 mm Grinding spindle drive approx.: 7.5 kW Total drive approx.: 17 kW - 380 V - 50 Hz Weight, approx.: 6,000 kg Accessories / Special equipment: • Universal internal grinding spindle stock with program-controlled cycles for grinding cylindrical and conical bores with one or more diameters, external cylindrical grinding and narrow face grinding • Face grinding device, hydraulically swiveling, with automatic cycles for grinding single and multiple face surfaces as well as stepped faces simultaneously • Electronic program control with large operating panel and ampere meter for both grinding spindles • Belt-driven grinding spindle drive with built-in grinding spindle and 5 separate, interchangeable grinding spindles with various belt pulleys of different diameters • Dressing unit for both grinding spindles, large chuck guard at the workpiece headstock • HEIDENHAIN digital display for cross adjustment of the workpiece headstock • Extensive accessories including 4-jaw faceplate approx. 520 mm, 3-jaw chuck approx. 380 mm, 3-jaw chuck approx. 130 mm, belt pulleys, spindle sleeves, grinding wheel mounts, foot switch • Separate hydraulic unit, mounted control cabinet, coolant system with magnetic separator Condition: Good to very good! Suitable for all grinding tasks! Please click here for a video of the machine: Delivery: Ex stock, available immediately, FCA Metzingen Payment: Net - upon receipt of invoice