Weiss Ogrevalni Sistem Za Vodo Ali Paro nakup rabljenega (87.443)

Stanje: dober (rabljeno), Leto izdelave: 2013, Ogrevalni sistem za lesno gorivo (sekanci ali tudi les) lahko proizvaja paro do 150 °C, primeren pa je tudi za ogrevanje sanitarne vode. Hidravlični pomik omogoča uporabo večjih kosov goriva. Ogrevalna moč do 850 kW, po potrebi tudi do 1 MW. Trenutno je shranjen v skladišču. Kledpoyhlrmefx Aqqet

Stanje: novo, Leto izdelave: 2023, For sale due to planning error: a brand-new, original-packaged cantilever arm discharge unit for a Fröhling heating system, suitable for a 6 m storage room, including a 1 m auger extension. Features separate drives for auger and rotary plate (two motors), making it ideal for dual boiler systems. The photo is from a different installation, as my unit is still in its original packaging. Kledpfeuq Iy Rjx Aqqet

Stanje: dober (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, še dobro ohranjena sekanci kurilnica Kjdpfx Aow Rpdreqqelt 60 kW ogrevalne moči leto izdelave 2014 brez sistema za izmet (lahko pa se priskrbi)

Stanje: rabljeno, Leto izdelave: 2008, Kotlovnica na lesne sekance z ogrevalno močjo 100 kW Polžasti transporter spredaj levo Kljdpfsyalbljx Aqqet Zaboj za pepel na desni z izpraznjevanjem za prostor premera 6 m že demontirano prosto zaradi priklopa na daljinsko ogrevanje vključeno nakladanje na tovornjak

Leto izdelave: 1995, stanje: dober (rabljeno), Rotor width 600 mm Kledpfx Aqefxg Dljqet 7.5 kW motor 650 rpm

Stanje: dober (rabljeno), Leto izdelave: 2010, Naprava za uplinjanje lesa za proizvodnjo električne energije, cca 50 kW. Vgrajena v 20-nožni kontejner. Zaloga rezervoarja cca 3,5 m dolžine. Dovod materiala preko dvižnega verižnega transporterja. Plinski motor ni vključen, ga pa je možno zagotoviti rabljenega ali novega. Klodpfx Asyxv Emjqqst

Stanje: dober (rabljeno), Leto izdelave: 1991, Shaker with triangular special stones Kljdpfx Ajn I Rqcjqqet

Stanje: rabljeno, Leto izdelave: 2021, vhodna napetost: 400 V, vhodni tok: 9 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, skupna masa: 3.500 kg, Ponujamo rabljeni Tantec PLX XYZ sistem za predobdelavo površin pred tiskom, letnik 2021. Tip: PLX XYZ Letnik: 2021 Serijska številka: 41805 Krmilna napetost: 24 VDC Napetost: 400/230 V 3f+N+PE Tok: 9,5 A Frekvenca: 50 Hz Moč: 6,5 kW Teža: 3500 kg Če imate kakršnakoli vprašanja ali potrebujete dodatne informacije, nam pišite ali nas kontaktirajte po telefonu. Klodpey Am D Ijfx Aqqst

Stanje: novo, Leto izdelave: 2026, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 3.400 mm, skupna širina: 600 mm, skupna višina: 1.400 mm, trajanje garancije: 18 meseci, skupna masa: 500 kg, vhodna napetost: 400 V, moč: 3 kW (4,08 KM), priključek za stisnjen zrak: 8 letvica, zračni tlak: 7 letvica, Oprema: dokumentacija / priročnik, SAS200 – Avtomatski sistem za oblikovanje i sečenje snack proizvoda bez omotača Industrijsko rešenje za proizvodnju snack proizvoda kao što su mini salame, kabanosi, jerky trake, riblji ili pet snack – potpuno bez omotača. Kompatibilan sa Handtmann, REX, Vemag ili našim sopstvenim zupčastim vakuum punjačem. Glavne karakteristike: • Kapacitet: do 200 kg/h • Kalupi za oblikovanje: cilindrični (Ø8–20 mm) i ravni (25×5 mm do 200×5 mm) • CE sertifikat • Izrada od nerđajućeg čelika u skladu sa higijenskim standardima • Pneumatska giljotina sa automatskim čišćenjem • Deo za rasterećenje za ravnomeran protok proizvoda • Upravljački panel sa 10,1” TFT touchscreenom (Delta) • Opcionalno sa kolica za sušenje (60 tacni, 30 nivoa) Kompatibilan sa: ✅ Handtmann, REX, Vemag ✅ Takođe sa našim sopstvenim vakuum punjačem (200 L) Kodpep S Nv Ijfx Aqqjlt Moguća demonstracija uživo u: • 🇬🇧 Ašford, Velika Britanija – Windsor Food Machinery • 🇵🇱 Krakov, Poljska – REGIS Showroom

Stanje: zelo dobro (rabljeno), Popolna linija za proizvodnjo palačink, crepesov in blinov. Sistem krožne vroče plošče. V odličnem stanju. Kodpfjx Hailjx Aqqslt

Stanje: dober (rabljeno), Leto izdelave: 1992, Fully automatic programmable cross-cutting with additional mark detection for defect removal via LUT system Kodpfxjl H E Tae Aqqjlt Infeed conveyor 6 m 6 discharge stations, total length 12 m The infeed belt is currently not running, most likely due to a frequency inverter issue.

Stanje: rabljeno, kapaciteta rezervoarja: 23.600 l, skupna dolžina: 5.000 mm, skupna širina: 3.000 mm, skupna višina: 1.750 mm, z revizijsko odprtino in iztokom Kodpfsycr Nnox Aqqelt Preskusni tlak: 2,3 m vodnega stolpca Prejšnja uporaba: rezervoar za svežo vodo

Stanje: rabljeno, lahko se uporablja za paniranje ali pomokanje (samo suhi premazi) idealno za nepravilne oblike v celoti iz nerjavečega jekla brezstopenjska regulacija hitrosti premično izhodni trak širina traku 400 mm zunanje dimenzije (D x Š x V): pribl. 3.000 x 1.600 x 1.900 mm Kodpfx Aqey Nx Huoqolt

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2000/80205, Complete powder coating line with automatic powder recovery. 1. WAGNER automatic powder coating booth – year of manufacture: 2000 Serial number: 2000/80205 Booth dimensions: 5.3 x 2.2 x 2.8 m Currently equipped with ZEUS Tribo spray guns – 8 pieces with rotary system Operating mode: through-feed Klsdpfoyrr Rqjx Aqqot Workpiece entrance dimensions: 100 x 158 cm 2. IMEL washer, external dimensions: 3 x 12 x 4.2 m (L-shaped) – Washer entrance size: 72 x 144 cm – Water tank: 3 x 2.2 x 1.2 m – Capacity approx. 6000 liters (located beneath the washer) – Water heating via Sant Andrea burner, model KB 40 GM with power modulation in the range of 179–468 kW (gas burner) 3. WAGNER powder filtering system, dimensions: 1.5 x 3.2 x 5.5 m 4. Overhead conveyor – length approx. 100 meters, with dedicated drive 5. WAGNER powder recovery unit with cyclone separator 6. Oven (double-circuit) with gas burner 163–390 kW One circuit for drying parts after washing; the other (longer) circuit for curing powder coating after spraying. Oven dimensions: 12 x 7 x 5.3 m, maximum workpiece size: 60 x 120 cm Additionally, we have 2 oil burners with comparable capacity as an alternative to gas burners. The total installed area is approximately 30 x 11 m.

Leto izdelave: 2009, stanje: rabljeno, Aluminium saw system with 2 saw motors, each capable of performing independent 45° cuts. Material feed unit with up to 8,100 mm capacity Cross conveyor, discharge table, chip conveyor, and extraction system included Soundproof enclosure Controlled via Siemens S7 panel Operating manual and other documentation available; further technical data upon request The machine was operational until disassembly For further technical data, please inquire or refer to the photos Kljdoqzmnuopfx Aqqet

Stanje: dober (rabljeno), skupna masa: 160 kg, The BookMaster brochure maker and the TrimMaster trimmer combine maximum performance with cost efficiency. They are easy to operate and require minimal maintenance, making them by far the most advanced, user-friendly, and reliable saddle-stitch brochure machines on the market. The BookMaster features a unique stapling mechanism that ensures virtually maintenance-free operation. The main wear parts are contained within the stapler cassette and are replaced every 5,000 cycles when the cassette is changed. This allows for over one million cycles before any maintenance of the stapling head is required. The BookMaster comes with manual adjustment for page margins, end offset, and stapling/folding position. The TrimMaster trimmer is equipped with a single, self-sharpening blade made of hardened steel for precise trimming of the book’s front edge. All trimmings are transported outside the machine into an external waste container, enabling continuous operation. Finished brochures are conveyed onto a high-performance outfeed belt. Additional information: - Max sheet size: 482 x 320 mm - Min sheet size: 210 x 140 mm - Max brochure thickness: 22 sheets - Max trim length: 25 mm - 230 Volt Kljdpfsy Idr Hox Aqqet Shipping available, collection possible, test run possible. Operating manual included.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, STC-Ref:G-671-2399 Horizon VAC 100A + SPF200 + FCA 200a, leto izdelave: 2012 Skupni števec: 11 milijonov. Oprema: - 1 postaja tipa VAC 100 a - Kratki tračni izstop - Rezalnik FC-200 A - Enota za spenjanje in zgibanje SPF 200 A - 1 zbirni stolp VAC 100 a - 2 spenjalni glavi Hohner - Zaslon (monitor) --> Na voljo od: 04/2026 Klodpfx Asywhczoqqet

Stanje: rabljeno, Leto izdelave: 2018, Technical data: Processes: Washing, rinsing, drying Power supply: 3x400 VAC +/- 5%, 50Hz + N + PE Compressed air connection: 6 bar Power consumption: 76 kVA Machine height at 1.6 m: n/a Vibrations: none Maximum payload: 200 kg Washing tank: 900 l Kedpjwf U Rusfx Aqqjlt Rinsing tank: 900 l Oil separator: 200 l

Stanje: novo, General Minimum diameter of workpieces: 25 mm Maximum diameter of workpieces: 270 mm Minimum size of hexagonal workpieces: 25 mm Maximum size of hexagonal workpieces: 200 mm Klsdeh Dw Dijpfx Aqqst Maximum stacking height: 2 x 350 mm Maximum stack weight: 2 x 450 kg Length of automation: 1,902 mm Width of automation: 740 mm Height of automation: 2,202 mm Total system weight: 1,000 kg Electrical connection: 380 VAC Pneumatic consumption: < 100 L / min Robot Payload: 25 kg / 19 kg net Payload: 35 kg / 28 kg net Safety Standard Safety with laser scanner Protection via integrated wall Option Protection via light curtain Protection via separate mesh wall Protection via separate transparent wall Protection via sliding doors

Stanje: rabljeno, Leto izdelave: 1992, Funkcionalnost: omejena funkcionalnost, Lakirna kabina po slikah naprodaj, vključno s žeravno progo, kot je razvidno s slik. Ob samostojni demontaži je cena predmet dogovora. Kjdpfx Aoy Aldaeqqolt

Stanje: rabljeno, Leto izdelave: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defect detection. This machine is ideally suited for precise cutting of solid wood with automatic identification and removal of wood defects. Technical specifications: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of manufacture: 2001 Commission number: 0682-10 Mains voltage: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Rated power: 11 kW Ksdpfx Aewtgcxeqqolt Fusing: 25 A Condition: used

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, For sale due to closure of a craft bakery: a WP roll production line, year of manufacture 1995. Installed upstream is a WP Multimatic, a proofing cabinet (retarder/proofer), and a WP stamping station. Please note: The dismantling of the equipment must be carried out by the buyer. Kjdpfx Aqsuqw Drjqelt

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MD1001, skupna višina: 150 mm, skupna dolžina: 45 mm, skupna širina: 52 mm, skupna masa: 50 kg, PROMIX 2KS MIXER, 1 COLOR + 1 CATALYST + 1 AIR + SOLVENT SHIPPING AVAILABLE 🚚 - Brand: Graco - Reference: MD1001 - UPC Code: 633955370647 - General industry: PAINTS AND ADHESIVES Ksdpfxewp Slks Aqqolt - Application: TWO-COMPONENT PAINTS, SOLVENT AND WATER-BASED, ADHESIVES, VARNISHES, LACQUERS. - MIXING CLOSE TO SPRAY GUNS FOR BETTER CONTROL - Compatible with solvent- and water-based epoxies and polyurethanes - Mixing ratio up to 30:1 - Pressure: 275.6 bar (4000 psi) - Second hand, fully overhauled - Warranty: 1 year - OPTIONAL: COLOR AND CATALYST CHANGE WITH CONTROL UNIT (PRICE ON REQUEST)

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, število predalov: 9, skupna višina: 2.150 mm, skupna širina: 1.610 mm, skupna dolžina: 3.850 mm, dolžina vilic: 90 mm, Ročno skladiščenje z 9 mesti za pločevine dimenzij L3250xH1700 mm, vsaka polica ima podlogo 9 cm in nosilnost 500 kg. Zunanje mere +/-: L3850xŠ1610xV2150 mm Kledpfxoy N Thgs Aqqst

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, število predalov: 9, skupna višina: 2.150 mm, skupna širina: 1.610 mm, skupna dolžina: 3.850 mm, dolžina vilic: 90 mm, Ročno skladiščenje z 9 mesti za pločevine dimenzij L3250xH1700 mm, vsaka polica ima podlogo 9 cm in nosilnost 500 kg. Kodjy N Tdhspfx Aqqjlt Zunanje mere +/-: L3850xŠ1610xV2150 mm