Walter Vt V nakup rabljenega (65.654)

Stanje: zelo dobro (rabljeno), Vötsch VTS 7027-10 temperaturni preskusni omara Proizvajalec: Vötsch Industrietechnik GmbH Tip: VTS 7027-10 Tip naprave: Temperaturna preskusna omara / Omara za temperaturno testiranje Prostornina preskusne komore: približno 270 litrov Naprodaj je rabljena Vötsch VTS 7027-10 temperaturna preskusna omara s programirljivim upravljalnikom na dotik. Naprava je primerna za profesionalna temperaturna testiranja, simulacijo okoljskih razmer, testiranje materialov, testiranje elektronike in komponent, zagotavljanje kakovosti ter razvojne, staralni in obremenitvene teste. Tehnični podatki: Iijdpfx Aoz A A Ecomuog Temperaturno območje: -70 °C do +180 °C Hitrost spreminjanja temperature (ogrevanje): približno 10 K/min Hitrost spreminjanja temperature (hlajenje): približno 14,5 K/min Časovna odstopanje temperature: ±0,3 do ±0,8 K Prostorsko odstopanje temperature: ±0,5 do ±2 K Prostornina preskusne komore: približno 270 litrov Hladilno sredstvo: R404A / R23 Količina hladilnega sredstva: 8 kg / 2,1 kg Priključna napetost: 3/N/PE AC 400 V ±10 % / 50 Hz Nazivna moč: 14 kW Nazivni tok: 26 A Hlajenje: Izvedba s hladilom Na voljo je dovod in odvod hladilne vode Dimenzije: Notranje mere (Š × G × V): približno 580 × 620 × 750 mm Zunanje mere (Š × G × V): približno 870 × 1.895 × 1.775 mm Oprema: Programirljiv upravljalnik na dotik S!MCON/32-NET sistem za nadzor, spremljanje in regulacijo Notranjost iz nerjavečega jekla Veliko okno za opazovanje Osvetlitev preskusne komore Stranske odprtine za testirane vzorce Rešetke iz nerjavečega jekla Nastavljiv omejevalec temperature Programska omejitev temperature Vmesnik RS232 Hladilna enota, hlajena z vodo Transportni podatki: Dimenzije (Š × G × V): približno 870 × 1.895 × 1.775 mm Teža glede na tehnično dokumentacijo, brez dodatne opreme: približno 835 kg Transport z viličarjem ali podobnim dvigalom Stanje: Rabljeno / Used Vizualno stanje glede na slike. Obseg dobave: Vötsch VTS 7027-10 temperaturna preskusna omara Upravljalnik na dotik Vložki iz nerjavečega jekla glede na slike Dodatna oprema glede na slike Razpoložljivost: po dogovoru. Obseg dobave je tak, kot je prikazano na sliki. Pridržujemo si pravico do sprememb, napak in prodaje.

Stanje: zelo dobro (rabljeno), ötsch VTS 7027-15, temperaturni preskusni omara Proizvajalec: Vötsch Industrietechnik GmbH Tip: VTS 7027-15 Vrsta stroja: temperaturna preskusna omara / omara za preskušanje pri različnih temperaturah Prostornina preskusne komore: približno 270 litrov Iijdpfxjz A U N Te Amujg Na prodaj je rabljena temperaturna preskusna omara Vötsch VTS 7027-15 z programirljivim upravljalnikom na dotik. Naprava je primerna za hitre preskusne cikle s spreminjanjem temperature, simulacijo okoljskih razmer, preskušanje materialov, preskušanje elektronike in komponent, zagotavljanje kakovosti ter razvojne, staralnostne in obremenitvene teste. Tehnični podatki: Temperaturno območje: -72 °C do +180 °C Hitrost segrevanja: približno 17 K/min Hitrost hlajenja: približno 18 K/min Časovna temperaturna odstopanje: ±0,1 do ±0,5 K Prostorska temperaturna homogenost: ±0,5 do ±2 K Prostornina preskusne komore: približno 270 litrov Hladilno sredstvo: R404A / R23 Količina hladilnega sredstva: 6,5 kg / 2,3 kg Omrežna priključitev: 3/N/PE AC 400 V ±10 % / 50 Hz Nazivna moč: 16 kW Nazivni tok: 31 A Hlajenje: Izvedba z vodnim hlajenjem Na voljo je dovod in odvod hladilne vode Dimenzije: Notranje mere (Š × G × V): približno 580 × 620 × 750 mm Zunanje mere (Š × G × V): približno 870 × 1.895 × 1.775 mm Oprema: Programirljiv upravljalnik na dotik Upravljanje S!MCON/32-NET Preskusna komora iz nerjavečega jekla Veliko okno za opazovanje Osvetlitev preskusne komore Stranske odprtine za dostop do preskusnega vzorca Rešete iz nerjavečega jekla Omejevalnik temperature Vmesnik RS232 Programski in ročni način delovanja Transportni podatki: Dimenzije (Š × G × V): približno 870 × 1.895 × 1.775 mm Teža: približno 835 kg Transport z viličarjem / dvigalom Stanje: Rabljen / Used Optično stanje glede na slike. Obseg dobave: Temperaturna preskusna omara Vötsch VTS 7027-15 Upravljalnik na dotik Vstavki iz nerjavečega jekla glede na slike Dodatna oprema glede na slike Razpoložljivost: po dogovoru. Obseg dobave je prikazan na slikah. Pridržujemo si pravico do sprememb, napak in predčasne prodaje.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, obratovalne ure: 2.256 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 710 mm, pomik osi Y: 400 mm, pomik po osi Z: 350 mm, obremenitev mize: 250 kg, največja hitrost vretena: 12.000 obr/min, TEHNIČNI PODATKI Pomik X-os: 710 mm Pomik Y-os: 400 mm Pomik Z-os: 350 mm Dimenzije mize: 850 x 400 mm Maks. obremenitev mize: 250 kg Višina mize od tal: 850 mm Hitrost vretena: 12.000 min⁻¹ Vretenasti stožec: BBT 30 Moč glavnega vretena: 13 kW Hitri pomiki (X, Y, Z): 60 m/min Maks. premer orodja: 68 mm Maks. dolžina orodja: 200 mm Maks. teža orodja: 3,0 kg Čas menjave orodja: 0,9 s Maks. število orodnih mest: 20 PODATKI O STROJU Krmiljenje: FANUC 0i-MF Mere (D x Š x V): 2.100 x 2.600 x 2.700 mm Teža stroja: 3.150 kg Obratovalne ure Čas obdelave: 2.256 h Iiodpfxsxlf Nrj Amusg Delovni čas: 3.557 h Krmiljenje vklopljeno: 24.690 h OPREMA Avtomatska vrata Keyarrow transporter za odrezke

Leto izdelave: 2010, stanje: pripravljen za uporabo (rabljen), - RABLJEN - CNC STROJ ZA OBSTRANJEVANJE Z DVOJNO HIDRAVLIČNO RAMO NAJVEČJI PREMER OBSTRANJEVALNEGA DELA: 3000 mm NAJVEČJA VIŠINA OBSTRANJEVALNEGA DELA: 800 mm NAJVEČJI PREMER OBSTRANJEVALNEGA DELA: 2800 mm VRATILO: 1–160 vrt/min; 71–114 kW; 68500 Nm; 2500 mm HOOD X-OSI: -150 + 1780 mm HOOD Z-OSI: 900 mm HITROSTI PODAJANJA X-Z: 8–10 m/min MENJALNIK ORODIJ: KOŠARICEV TIP; TIP CAPTO C5; 24 POZICIJ NADZORNA ENOTA: SIEMENS 840D NAJVEČJA DOVOLJENA OBREMENITEV: 15000 kg TEŽA: 54000 kg DODATNA OPREMA: TRANSPORTER STROŽKOV; NAPRAVA ZA NASTAVITEV ORODIJ; AVTOMATSKA VRATA; SISTEM ZA HLAJENJE VRATILA; Iiedeyyrh Hjpfx Amuog PRENOSNO ROČNO KRMILO; SONDA ZA DOTIK

Stanje: nepreverjeno (rabljeno), Znamka: Walter Model: Woodtronic CNC5 z nakladalcem za 2 paleti Iiedpexm T Huofx Amuog Leto izdelave: 2000 Prodaja se v trenutnem stanju, rabljeni CNC stroj za brušenje karbidnih rezil, 8 osi za čelno in zadnjo stran z linearnim nakladalcem, 2 postaji. Obseg premerov: 80 do 850 mm - Standardna merilna sonda za zajem in upravljanje parametrov brušenja - SIEMENS MMC103 numerično krmiljenje - Vse geometrije zob Nakladalec za 2 paleti - Premer rezila do 600 mm - Magnetni žeblji Možnosti na voljo na zahtevo Pogodbene fotografije

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Overhauled, 12 months warranty, immediately available. Equipped with a safety system for solvent-containing substances according to DIN 1539, includes exhaust fan, supply air cage filter, as well as concentration monitoring and recirculating air filter wall inside the chamber. - Internal dimensions (W x D x H): 1000 x 1000 x 1500 mm - External dimensions (W x D x H): 1900 x 1430 x 2315 mm - Capacity: 1500 liters - Max. temperature: 300°C - Eurotherm Controller 2404 (20 programs with up to 16 segments each) - Eurotherm Recorder - Connected load: 29 kW - 6 grid shelves included, plus V2A support brackets - Minimum exhaust air flow rate: 360 m³/h - Maximum permissible solvent volume: 36 g at nominal temperature of 300°C - With concentration measurement - New window gaskets - Own weight approx. 1200 kg - Includes documentation, CE declaration - Electrically tested and supplied with DGUV test report Iiedsvcb U Aepfx Amusg Viewing available by appointment in our warehouse. We offer new and used industrial ovens. Contact us! Oven, ovens, drying oven, kiln, heat oven, warming cabinet, industrial oven, paint dryer, tempering oven, heating oven, chamber furnace, curing oven, recirculating air drying cabinet, recirculating oven, solvent oven, chamber recirculation oven

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Splošne informacije Tip stroja: Vertikalni obdelovalni center s pomično kolono Krmilna enota (CNC): MAZATROL Fusion 640M Leto izdelave: 2003 Število osi (krmiljenih): 3 (standardno), 4 (opcijsko z vrtljivo mizo) Hodi in delovno območje Pomik X-osi (vzdolžno): 1740 mm Pomik Y-osi (prečno): 760 mm Pomik Z-osi (vertikalno): 660 mm Ijdpjx Ezntjfx Amusig Dolžina mize: 2000 mm Širina mize: 760 mm Največja masa obdelovanca (nosilnost mize): 1400 kg Vreteno in zmogljivost Stožec vretena: SK 40 (ali ISO/BT 40) Največje število vrtljajev vretena: 12.000 min⁻¹ (vrt/min) Moč glavnega motorja vretena: 18,5 kW (običajno 10-minutna vrednost, neprekinjena moč je lahko nižja) Hitri podajalec (X-os): do 42 m/min Hitri podajalec (Y/Z-osi): do 36 m/min ali 42 m/min (odvisno od konfiguracije) Delovni podajalec: do 36.000 mm/min Menjalec orodij (ATC) Kapaciteta zalogovnika orodij: 30 orodij (standardno), 48 orodij (opcijsko) Največja masa orodja: 8 kg Največja dolžina orodja: 350 mm Največji premer orodja (z orodji v sosednjih mestih): 80 mm Največji premer orodja (brez sosednjih orodij): 110 mm Dimenzije in masa stroja Dolžina stroja (L): ca. 4450 mm Širina stroja (W): ca. 3460 mm Višina stroja (H): ca. 3100 mm Masa stroja: ca. 11.500 kg (11,5 ton) Kapaciteta rezervoarja hladilne tekočine: ca. 450 l Skupna priključna moč: ca. 46,7 kW Potreben tlak zraka: 5 - 9 bar

Stanje: dober (rabljeno), Leto izdelave: 2024, Leto izdelave 2024 3D AOI inšpekcijski sistem z inteligentno DLP projekcijo 1 x AOI podatkovna struktura Spletni Apache strežnik 1 x učno mesto (offline programiranje) 1 x verifikacijska postaja (preverjanje ali popravilo) 1 x Q-up (analizna postaja) 1 x administrativni vmesnik za upravljanje AOI Debelina tiskanega vezja 0,4–4 mm Iiodpfx Aeyw Nxwjmusg Teža tiskanega vezja do 4 kg Upogib tiskanega vezja +/- 10 mm Stisnjen zrak 0,3x0,6 Mpyi 10l/min Osvetlitev RGB barvna High Light metoda 2D kamera in 3D merjenje Ločljivost: telecentrična leča s 15µ + 4 stranske kamere po 10µ Merjenje višine do 25 mm Velikost tiskanega vezja 50x50–510x460 mm Prost prostor nad komponentami zgoraj 40 mm, spodaj 40 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Na voljo je CNC vertikalno obdelovalni center Mazak. Pomik X/Y/Z: 1660mm/760mm/660mm, moč vretena: 11kW, hitrost vretena: 7000 obr/min, dimenzije mize X/Y: 2000mm/760mm, največja teža obdelovanca: 800kg, hitri pomik X/Y/Z: 24m/min/24m/min/20m/min, podajanje: 5m/min, število orodnih mest: 24. Dimenzije stroja X/Y/Z: pribl. 4350mm/3400mm/2850mm, teža: pribl. 8700kg. Dokumentacija je na voljo. Možen je ogled na kraju samem. Iiedpfxexfvico Amueg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, potovalna razdalja osi X: 220 mm, pomik po osi Z: 300 mm, moč vretenovega motorja: 15.000 W, največja hitrost vretena: 4.000 obr/min, skupna višina: 2.650 mm, skupna masa: 5.000 kg, proizvajalec krmilnikov: OKUMA, model krmilnika: OSP-E100L., kot vrtenja osi C (maks.): 360 °, število osi: 3, Vertikalni stružni stroj, letnik 2004. Okuma LVT300 ima največji premer struženja 280 mm in dolžino struženja 200 mm. Omogoča obseg vrtljajev glavnega vretena od 60 do 4.000 min⁻¹ ter revolver z 12 postajami za večjo produktivnost. Če iščete vrhunske zmogljivosti struženja, razmislite o stroju Okuma LVT300, ki ga ponujamo v prodajo. Za več informacij nas kontaktirajte. • Hitri pomik X-osi: 60.000 mm/min • Hitri pomik Z-osi: 30.000 mm/min • Maks. premer struženja: ϕ 280 mm • Maks. dolžina struženja: 200 mm • Število revolverskih mest: 12 • Hitrost pogonskega revolverja (model M): 45–4.500 min⁻¹ • Tlorisna dimenzija: 1.400 x 3.180 mm Isdpfxoy Shiqo Amusig Tehnične specifikacije Pogonska orodja: da

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, obratovalne ure: 6.000 h, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 4.000 obr/min, hitro pomikanje X-os: 75 m/min, hitri pomik os Y: 30 m/min, premer struženja: 450 mm, skupna dolžina: 8.720 mm, skupna višina: 3.888 mm, skupna širina: 4.325 mm, vrsta vhodnega toka: trifazni, vrtilni moment: 585 Nm, skupna masa: 18.000 kg, model krmilnika: Siemens 840 D sl, Na prodaj je Hessapp DVT400, letnik 2022. Opremljen s krmilnikom Siemens 840 D sl. Oprema: - Pogonjeni orodni vložki na levi rotacijski glavi - Dovodni in odvodni trak - Sistem za odvajanje sekancev (izmet na desni strani) Iijdpfx Amsw D Apcjuog - 2x nosilec orodja 12x VDI50 Naprava je priključena na električno omrežje in si jo je mogoče ogledati.

Stanje: zelo dobro (rabljeno), Heraeus Vötsch Type: VT 7021 Temperature Test Chamber, Air-Cooled 1 Feedthrough, DN 80 mm Test Chamber Volume: 210 liters Temperature Range: -70°C to +180°C Temporal Temperature Deviation: ± 0.2 to ± 0.5 K Spatial Temperature Deviation: ± 0.5 to ± 1.5 K Temperature Change Rate Heating: 2.5 K/min Temperature Change Rate Cooling: 2.5 K/min Max. Heat Compensation: 800 W Test Chamber Dimensions: Width 560 mm x Depth 570 mm x Height 630 mm External Dimensions: Width 850 mm x Depth 1250 mm x Height 1640 mm Iisdpfjziiw Ijx Amuog Electrical Connection: 1/NPE AC 230V ± 10% 50Hz Rated Power: approx. 1.8 kW Rated Current: 12 A Refrigerants: R404A and R23 Weight: 355 kg Important Information for Buyers: For your safety, the following procedures are carried out on all chambers we offer: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful checks, the chambers undergo a documented test run Condition: used Scope of delivery: (See picture) (Subject to changes and errors in technical specifications and information) Further questions can be answered by phone.

Leto izdelave: 2004, stanje: dober (rabljeno), Izdelano leta 2004. Grejna moč 20,8, 23,4, 31,2 kW. Najvišja temperatura 280 °C. Višina izhodnega odprtja 300–400 mm. Največja širina tunela 500 mm. Nastavljiva hitrost transporta 5–25 m/min. Električno napajanje 400 VAC. Električno napajanje 3-fazno, N+PE. Električna frekvenca 50 Hz. Električna moč, odvisno od gretja 18–30 kW. Dimenzije (D x Š x V) 2600 x 1100 x 1500 mm. Oprema: Časovnik za zamujeno izklopitev. Tlačne kolesa na izhodu. Iiedpfxod S Svhj Amueg Hladilni ventilator nad izhodom. Stranska naprava za pihanje folije. Vgrajena vtičnica 16 A. Sistem za mazanje verige.

Stanje: zelo dobro (rabljeno), Vötsch temperaturno-šok testna komora Tip: VT 7012 S2 Proizvajalec: Vötsch Industrietechnik GmbH Izvedba: vodno hlajenje Na prodaj je temperaturno-šok testna komora Vötsch v dvo-komorski izvedbi za hitre temperaturne teste. Primerna za industrijo, avtomobilsko industrijo, letalstvo ter raziskave in razvoj. Temperaturna območja: Topla komora: +50 °C do +220 °C Hladna komora: -80 °C do +70 °C Temperaturni podatki: Časovno temperaturno odstopanje: ±1 K Prostorsko temperaturno odstopanje: ±2 K Hitrost ogrevanja tople komore: pribl. 11 K/min Hitrost ogrevanja hladne komore: pribl. 2 K/min Hitrost hlajenja: pribl. 3 K/min Preizkusni prostor: Prostornina: pribl. 125 litrov Notranje mere: pribl. 470 x 650 x 410 mm Prehod za kable: Ø 67 mm Električni podatki: Priključek: 3/N/PE AC 400 V ±10% / 50 Hz Nazivna moč: pribl. 10 kW Nazivni tok: pribl. 25 A Hladilno sredstvo: R404A: 2,9 kg R23: 1,27 kg Tlačni podatki: ND max.: 22,5 bar HD max.: 25 bar Dimenzije: pribl. 930 x 2115 x 1970 mm Teža: Iiedpfx Amey Iyuwoueg pribl. 1000 kg Oprema: Dvo-komorni šok testni sistem Digitalno upravljanje Programski način delovanja Opazovalno okno Prehod za kable Stanje Rabljeno Vizualno stanje skladno s slikami Prisotne običajne sledi skladiščenja in uporabe Obseg dobave: Vötsch VT 7012 S2 temperaturno-šok testna komora Pribor kot prikazano na slikah Pomembno obvestilo: Vsi podatki so bili pripravljeni po najboljšem vedenju na podlagi slik, tipnih tablic in informacij proizvajalca. Dostava možna. Pridržujemo si pravico do sprememb, napak in predhodne prodaje. Za dodatna vprašanja smo na voljo po telefonu.

Stanje: novo, Leto izdelave: 2024, Many of our machines are available from stock. Call us to find out more! The offer applies to the basic version of the machine. All optional equipment and their prices can be found on our website. Fiber Tube Laser with Automatic Feed FLV-TA-6022 3kW Iiedpfxjtiy I Ij Amueg Technical Specifications - Max. profile height: 220 mm - Max. profile length: 6000 mm - X and Y axis positioning accuracy: ±0.05 mm/m - Repeatable X and Y axis positioning accuracy: ±0.03 mm - Max. acceleration: 0.0G - Power: 3.0 kW - Source brand: Raycus or MAX Photonics (selectable) - Power supply: ~3x400 V 50 Hz - Protection class: IP54 Construction The machine is extremely stable thanks to its welded construction. High-speed movement of the cutting head with high precision is guaranteed by Japanese Fuji servo drives. Automatic lubrication system for axis guides. User Convenience Loading heavy sheets is made easier by transport balls integrated into the table surface, ensuring smooth sliding during loading. Removing small finished parts is also significantly easier thanks to the drawers located under the machine, which can be pulled out effortlessly using a practical handle. RayTools cutting head with autofocus Otinus Protect (optional*) This product offers individual protection for your laser source. With this service, you ensure continuous operation in your company. We secure your business so you can meet your delivery deadlines. Voltage stabilizer (optional*) Control Panel The computer runs Windows 10 with CypCut software for processing, featuring functions such as design, file import and export, and job optimization. All installed programs come with lifetime licenses. The machine is equipped with a wireless controller. Professional Support We ensure ongoing support to our customers. That’s why we offer an hourly package for expert support by Otinus technicians with every machine purchase. Otinus Academy Learning Software By purchasing this machine, you will receive one-year access to online courses, allowing you to train new staff easily or refresh existing training knowledge! Included with the machine: - 3-day training and machine installation - Days 1 and 2: up to 8 hours – commissioning and training on controls - Day 3: up to 8 hours – independent operation under our technician’s supervision, including programming specific details - Consultation with our experts - By phone: 7:30 am to 9:00 pm (Mon-Sat) – an 8-hour package to be used within 12 months - Online: 7:30 am to 2:30 pm (Mon-Fri) – an 8-hour package to be used within 12 months - Access to Otinus Academy online courses - LibreCad – access valid for 12 months Additionally, you will receive: - CAD drawing package

Stanje: zelo dobro (rabljeno), Vötsch VT³ 7012 S2, omara za preskusne preizkušnje s temperaturnim šokom Proizvajalec: Vötsch Industrietechnik GmbH Tip: VT³ 7012 S2 Tip stroja: Omara za preskusne preizkušnje s temperaturnim šokom Prostornina preskusne komore: 125 litrov Ponujamo rabljeno omaro Vötsch VT³ 7012 S2 za hitre temperaturne spremembe in preskusne preizkušnje simulacije okoljskih razmer. Iiodpfxoztwk Rj Amujg Naprava je primerna, med drugim, za preskušanje elektronike, komponent, materialov in sklopov, zagotavljanje kakovosti, raziskave in razvoj ter preskusne preizkušnje staranja in obremenitve. Tehnični podatki: Temperaturno območje tople cone: +50 °C do +220 °C Temperaturno območje hladne cone: -80 °C do +70 °C Prostornina preskusne komore: 125 litrov Maksimalna obremenitev: 50 kg Hlajenje: vodno hlajeno Hladilno sredstvo 1: R404A Količina hladilnega sredstva: 1,70 kg Maksimalni nizki tlak: 22,5 bar g Maksimalni visoki tlak: 25 bar g Hladilno sredstvo 2: R23 Količina hladilnega sredstva: 1,27 kg Maksimalni nizki tlak: 22,5 bar g Maksimalni visoki tlak: 25 bar g Delovni tlak: 14 bar g Priklop na električno omrežje: 3/N/PE AC 400 V +10 % / 50 Hz Nazivna moč: 10 kW Nazivni tok: 25 A Dimenzije: Dimenzije preskusne komore (Š × G × V): 470 × 650 × 410 mm Zunanje dimenzije (Š × G × V): 970 × 2350 × 2450 mm Oprema: Programirljiv nadzorni sistem na dotik Dve temperaturni coni Vodno hlajen hladilni sistem Okno za opazovanje Razsvetljava preskusne komore Kazalnik temperature Kazalnik stanja Nosilec/transportna košara za preskusni vzorec Prehod za preskusni vzorec Dodatna oprema glede na slike Transportni podatki: Zunanje dimenzije: 970 × 2350 × 2450 mm (Š × G × V) Teža: 1000 kg Možen je prevoz s špediterjem. Stanje: Rabljen/Used Vizualno stanje glede na slike Tipna oznaka je prisotna. Obseg dobave: 1 × Omara Vötsch VT³ 7012 S2 za preskusne preizkušnje s temperaturnim šokom Programirljiv nadzorni sistem na dotik Dodatna oprema glede na slike Za varnost naših strank se pred prodajo na ponujenih preskusnih in klimatskih napravah izvedejo naslednji postopki: 1. Preverjanje delovanja in zamenjava potrebnih komponent 2. Po potrebi ponovno polnjenje z hladilnim sredstvom, ki ustreza zakonskim zahtevam 3. Preizkus tesnosti z izdajo potrdila 4. Dokumentiran preizkusni tečaj po uspešnem preverjanju Naprava je na voljo. Obseg dobave je prikazan na slikah. Pridržujemo si pravico do sprememb, napak in vmesne prodaje.

Stanje: zelo dobro (rabljeno), Vötsch Model: VTS³ 7018-5 Water-cooled Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 900 mm x Depth 1550 mm x Height 1850 mm Temperature testing: Temperature range: -70°C to +180°C Temperature change rate: Heating 7.5 K/min Temperature change rate: Cooling 7.5 K/min Test chamber volume: 190 liters Rated voltage: 400 V Rated current: 20 A Rated power: 9 kW Weight: approx. 540 kg Refrigerant: R404A and R23 Important safety information for buyers: The following procedures are carried out on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if required 3. Leak tightness testing with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see image) (Specifications subject to change and error!) Iiedpfszfg Ucex Amujg For further questions, feel free to contact us by phone.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 163 kg, vrsta goriva: dizel, kapaciteta rezervoarja: 16 l, barva: bela, Izhodni tok: 11 A, izhodna napetost: 400 V, izhodna frekvenca: 50 Hz, vrsta izhodnega toka: trifazni, nazivna moč: 6 kW (8,16 KM), nazivna (navidezna) moč: 7 kVA, skupna dolžina: 900 mm, skupna širina: 560 mm, skupna višina: 800 mm, največja hitrost vrtenja: 3.000 obr/min, vrsta hlajenja: zrak, število valjev: 1, delovna prostornina: 498 cm³, kapaciteta rezervoarja za gorivo: 16 l, izolacijski material: F, vrsta zaščite (IP koda): IP23, Dizelski rezervni agregat GB8500VTS, tovarniško nov, takoj na voljo, možne manjše površinske poškodbe laka. 84419 Schwindegg. PREKLOPLJIVO MED 230 V (32 A) IN 400 V (16 A) Naprava se prek nadzorne plošče preklaplja med enofaznim delovanjem pri 230 V in trifaznim delovanjem pri 400 V. Sistem za preklapljanje faz VTS omogoča uporabo enega samega generatorja tako v enofaznem načinu (230 V) kot v trifaznem načinu (400 V), pri čemer je izguba moči minimalna. Iedezwwzwopfx Amujig Pomembno: pri čistem trifaznem agregatu z močjo 6 kW je na vsako fazo na voljo le približno 2 kW. To pogosto ni dovolj za krožno črpalko, črpalko za vrtino ali hladilni sistem. Pri GB8500VTS je v enofaznem delovanju na voljo polna moč na eni fazi, vtičnica 32 A pa je ustrezno zasnovana. NADZORNA PLOŠČA Digitalni prikaznik HJ-502 za napetost, tok, moč, frekvenco in delovne ure. Ključno stikalo, stikalo za izklop v sili, gumb za predgretje, rotacijsko stikalo 400 V / 0 / 230 V. Na voljo je priključek za avtomatsko preklapljanje na omrežno napajanje (ATS). GENERATOR IN MOTOR Samovzbujni sinhroni generator z regulacijo napetosti AVR, izolacijski razred F, stopnja zaščite IP23, oznaka po ISO 8528-1. Enovaljni dizelski motor, zračna hladitev, štiritaktni, neposreden vbrizg, električni zagon, naprava za predgretje in stikalo za zmanjšanje kompresije za varen hladni zagon pozimi. Dizel brez bio sestavin, količina olja 1,65 l, rezervoar 16 l z indikatorjem nivoja. IZVEDBA Zvočno izoliran pokrov, 68 do 72 dB(A) v razdalji 7 m. Transportni komplet z 4 kolesi in 2 ročajema. Mere 90 x 56 x 80 cm, teža 163 kg. Enosmerni izhod 12 V / 8,3 A. OBSEG DOSTAVE Agregat z vgrajeno zagonsko baterijo, ustrezni vtiči za izhod 400 V in 230 V, komplet orodja in uporabniški priročnik v nemščini. Montaža ni potrebna. Olje in gorivo nista vključena. Garancija 12 mesecev v skladu z našimi splošnimi pogoji. DRUGI MODELI IZ ISTEGA SKLADIŠČA GB8500: 7,5 kVA / 6,0 kW, zračna hladitev, čisto trifazni 400 V, 11 A, enovaljni, 16 l rezervoar – isti motor, najcenejša različica. GB85001Ph: 7,5 kVA / 6,0 kW, zračna hladitev, čisto enofazni 230 V, 32 A, enovaljni, 16 l rezervoar. GB11000VTS: 9 kVA / 7,5 kW, zračna hladitev, preklopno, 230 V, 32 A oz. 400 V, 16 A, enovaljni, 30 l rezervoar. GB13000: 12,5 kVA / 10 kW, zračna hladitev, čisto trifazni 230 V, 16 A, dvovaljni, 25 l rezervoar. GB13000VTS: 7,36 kVA oz. 12,5 kVA / 10 kW, zračna hladitev, preklopno, 230 V, 32 A oz. 400 V, 16 A, dvovaljni, 25 l rezervoar. GB50: 50 kVA / 40 kW, vodna hladitev, SmartGen, štirivaljni, 95 l rezervoar. GB80: 100 kVA / 80 kW, vodna hladitev, SmartGen, štirivaljni, 165 l rezervoar. Podatkovni listi za vse modele so na voljo na zahtevo. KOLIČINE IN CENIKI Večje količine takoj na voljo. Navedena cena velja za posamezen nakup. Možne so dobave v kontejnerjih in celotnih dobave. DOSTAVA Osebni prevzem v 84419 Schwindegg po dogovoru. Dostava kot posamezen kos ali s špediterjem, stroški prevoza do ciljne lokacije na zahtevo. Izvoz v tretje države je možen. PRODajalec Geisberger Gesellschaft für Energieoptimierung mbH, Hassenham 4, 84419 Schwindegg. Številka za DDV: DE 204232112 Kot družinsko podjetje proizvajamo blokovne toplotno-električne centrale in rezervne agregate že od leta 1999 ter iz našega sedeža v Schwindeggu, Gornja Bavarska, neodvisno odgovarjamo na tehnična vprašanja.

Stanje: dober (rabljeno), Nosilnost 5000 kg. Iijdpfx Aozlaiaomuog Na voljo sta 2 kosa.

Stanje: novo, Leto izdelave: 2024, Many of our machines are available from stock. Call us to learn more! The offer refers to the basic version of the machine. All optional equipment and their prices can be found on our website. Fiber Tube Laser for Profiles FLV-T-6022 1.5 kW Technical Specifications - Maximum profile height: 220 mm - Maximum profile length: 6000 mm - X and Y axis positioning accuracy: ±0.05 mm/m - Repeatable positioning accuracy (X and Y axis): ±0.03 mm - Maximum acceleration: 0.0G - Power: 3.0 kW - Power consumption: 24.0 kW - Laser source brand: Raycus or MAX Photonics (selectable) - Power supply: ~3x400 V 50 Hz - Protection class: IP54 Cutting Depth - Steel S235: recommended depth 20.0 mm, max. depth 22.0 mm - Stainless steel: recommended depth 8.0 mm, max. depth 10.0 mm - Aluminum: recommended depth 6.0 mm, max. depth 8.0 mm - Brass: recommended depth 5.0 mm, max. depth 6.0 mm Construction The machine is extremely stable thanks to its welded frame design. High-speed and highly accurate head movement is ensured by Japanese Fuji servo drives. Automatic lubrication system for the axis guides. User Convenience Loading of heavy sheets is facilitated by transport balls integrated in the table surface, enabling smooth sliding during loading. Small finished parts can also be easily removed using drawers located beneath the machine, which can be conveniently pulled out via a practical handle. RayTools cutting head with autofocus Otinus Protect (optional*) This product provides customized protection for your laser source. This service ensures uninterrupted operation in your company. We safeguard your business so you can fulfill your orders on time. Voltage stabilizer (optional*) Control Panel The computer runs Windows 10 and CypCut software for processing features such as design, import/export of files, and job optimization. All installed programs come with lifetime licenses. The machine is equipped with a wireless controller. Iiodpstiy Hbjfx Amueg Professional Support We maintain close contact with our customers. Therefore, when you purchase a machine, we offer a package of service hours for professional support by Otinus technicians. Otinus Academy Training Software With the purchase of this machine, you receive one year of access to online courses, allowing you to efficiently train new employees or refresh knowledge acquired from trainings! Scope of Delivery Includes a 2-day training and machine installation - Day 1 up to 8 hours – commissioning and training in machine operation - Day 2 up to 8 hours – independent work on the machine under supervision of our technician, with the possibility of programming specific parts. Consultation by our specialists - By telephone: 7.30 to 21.00 (Mon-Sat) – an 8-hour package to be used within 12 months. - Online: 7.30 to 14.30 (Mon-Fri) – an 8-hour package to be used within 12 months. Access to Otinus Academy online courses - LibreCAD – access valid for 12 months Additionally, you receive - CAD drawing package

Stanje: novo, Leto izdelave: 2024, Many of our machines are available from stock. Call us to find out more! The offer applies to the basic version of the machine. All optional equipment and their prices can be found on our website. Fibre Tube Laser for Profiles FLV-T-6022 3kW Technical Specifications - Maximum profile height: 220 mm - Maximum profile length: 6,000 mm - Positioning accuracy (X and Y axis): ±0.05 mm/m - Repeatable positioning accuracy (X and Y axis): ±0.03 mm - Maximum acceleration: 0.0G - Laser power: 3.0 kW - Power requirement: 24.0 kW - Laser source: Raycus or MAX Photonics (to choose from) - Power supply: ~3x400 V 50 Hz - Protection class: IP54 Iisdpjtiy Hfsfx Amujg Cutting Depth - Steel S235: recommended 20.0 mm, maximum 22.0 mm - Stainless steel: recommended 8.0 mm, maximum 10.0 mm - Aluminium: recommended 6.0 mm, maximum 8.0 mm - Brass: recommended 5.0 mm, maximum 6.0 mm Construction The machine is exceptionally stable, thanks to its welded frame construction. High-speed movement of the head with maximum precision is ensured by Japanese FUJI servo drives. Automatic lubrication system for axis guides. User Convenience Loading heavy sheets is facilitated by transport balls integrated in the table surface to ensure smooth sliding during loading. Even the removal of small finished parts is much easier thanks to trays beneath the machine, which can be pulled out via a practical handle. RayTools Autofocus Cutting Head Otinus Protect (optional*) This product provides individual protection for your laser source. With this service, you ensure work continuity in your business. We safeguard your operations so you can fulfill your orders on time. Voltage Stabilizer (optional*) Control Panel The computer runs Windows 10 and CypCut software for operation, including features for design, file import/export, and process optimization. All installed programs come with lifetime licenses. The machine is equipped with a wireless controller. Professional Support We ensure close communication with our customers. That is why, with the purchase of a machine, you receive a package of hours for professional support from Otinus technicians. Otinus Academy Learning Software When you purchase this machine, you receive one year's access to online courses, enabling you to easily train new employees or refresh your knowledge from past training. Machine Scope of Delivery - 2-day training and machine installation - Day 1, up to 8 hours: Commissioning and control training - Day 2, up to 8 hours: Independent operation under the supervision of our technician – specific part programming possible. - Consultation with our specialists - By phone: 7:30 am to 9:00 pm (Mon-Sat) – 8-hour package, to be used within 12 months - Online: 7:30 am to 2:30 pm (Mon-Fri) – 8-hour package, to be used within 12 months - Access to Otinus Academy online courses - LibreCAD – access for 12 months Additionally included: - CAD drawing package

Stanje: zelo dobro (rabljeno), Vötsch Model: VTS³ 7027-25 Heraeus Vötsch Temperature Test Chamber, Water-cooled Technical Specifications: - With a temperature change rate of 25 K/min - Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 615 mm - External dimensions: Height 1775 mm, Width 780 mm, Depth 1895 mm - Temperature range: -72°C to +180°C - Temporal temperature deviation: ±0.1 to ±0.5 - Spatial temperature uniformity: ±0.5 to ±2.0 - Cooling rate: 25 K/min - Heating rate: 25 K/min - Heat compensation at -20°C: 8000 W - Heat compensation at +20°C: 8000 W - Test volume: 270 liters - 2x side feedthroughs ∅ 125 mm - 1x side feedthrough ∅ 50 mm - Chamber is water-cooled Test chamber lighting: - LED strip 24 V, 6.8 W / 2x halogen bulb 24 V, 50 W Electrical connection: - Rated voltage: 3/N/PE AC 400V ±10% 50Hz Iiedpfxjzg Eygs Amujg - Rated power: 26 kW - Rated current: 44 A - Refrigerants: R-452A and R-23 - Weight: approx. 980 kg Important safety information for you as the buyer! The following points are carried out in advance on all chambers we offer: 1. Functional test and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful verification, the chambers undergo a documented trial run Condition: used Scope of delivery: (See image) (Subject to changes and errors in technical data and information!) We will gladly answer any further questions by phone.

Stanje: rabljeno, Leto izdelave: 2011, Hankook VTC-160E, CNC obdelovalni center vertikalnega tipa s podstavkom, namenjen struženju in frezanju, opremljen z barvnim CNC-krmilnikom Fanuc 31i-Model A, premer mize 1600 mm, maksimalni premer obdelovanca 2000 mm, maksimalna višina struženja 1400 mm, maksimalna obremenitev mize 10.000 kg, horizontalni pomik glave (os X) 1900 mm, vertikalni pomik podstavka (os Z) 900 mm, vertikalni pomik prečnega nosilca 700 mm, resolucija osi C 0,001, moč vretena za frezanje 18,5 kW, hitrost vretena za frezanje 30–3000 vrt/min, hitrost mize 0,7 do 280 vrt/min (2-stopenjska prestavna omara), maksimalni navor mize 23800 Nm, velikost podstavka 220 mm x 220 mm, hitri pomik (os X) 7500 mm/min, hitri pomik (os Z) 7500 mm/min, hitrost podajanja orodja 0,001 mm do 7500 mm/obrat, držalo za orodja s 24 mesti (12 standardnih + 12 za frezanje), glavni motor 45 kW, skupna poraba električne energije stroja 100 kVA, velikost stroja 5300 mm x 4500 mm, teža stroja 34.000 kg, različna držala za orodja. Serijska številka: 42D09215 (2011). Država izvora: Južna Koreja. Spodbujamo predlaganje ponudb pred dražbo. Lokacija: Ti predmeti se nahajajo v Oldburyju, zahodni regiji Midlands, Združeno kraljestvo. Na žalost na lokaciji ni možnosti za natovarjanje, zato bo razstavljanje in natovarjanje stroja v breme kupca. Vsa orodja so ponujena, kot je posebej opisano. Iiodpfxezwnqcj Amuog

Stanje: novo, Leto izdelave: 2024, Many of our machines are available from stock. Call us to learn more! The offer applies to the machine's basic version. All optional equipment and corresponding prices can be found on our website. Fiber Tube Laser for Profiles FLV-T-6035 3kW Technical Specifications - Maximum profile height: 350 mm - Maximum profile length: 6000 mm - X and Y axis positioning accuracy: ±0.05 mm/m - Repeatable accuracy of X and Y axes: ±0.03 mm - Maximum acceleration: 0.0G - Power output: 3.0 kW - Power requirement: 24.0 kW - Source brand: Raycus or MAX Photonics, selectable - Power supply: ~3x400 V 50 Hz - Protection class: IP54 Cutting Depths - Steel S235: recommended depth 20.0 mm, maximum depth 22.0 mm - Stainless steel: recommended depth 8.0 mm, maximum depth 10.0 mm - Aluminum: recommended depth 6.0 mm, maximum depth 8.0 mm - Brass: recommended depth 5.0 mm, maximum depth 6.0 mm Construction Thanks to its welded frame, the machine is highly stable. High-speed, highly precise head movement is ensured by Japanese Fuji servo drives. Automatic lubrication system for linear guideways. User Convenience Loading heavy sheets is facilitated by transport balls integrated into the table top, allowing easy sliding during loading. Small finished parts are also easily retrieved thanks to carriages located under the machine, which can be pulled out using a practical handle. RayTools cutting head with autofocus Otinus Protect (optional*) This product provides tailored protection for your laser source. With this service, you can ensure continuous operation for your business. We safeguard your work so you can complete your orders on time. Voltage Stabilizer (optional*) Control Panel The computer operates on Windows 10 and includes CypCut software for processing with features such as: design, file import and export, workflow optimization. All installed programs come with lifetime licenses. The machine is equipped with a wireless controller. Iijdpsthh Nxjfx Amujg Professional Support We ensure ongoing contact with our customers. For this reason, with every machine purchase, we offer an hourly support package from Otinus technicians. Otinus Academy Learning Software With the purchase of this machine, you receive one year of access to online courses, allowing you to easily train a new employee or refresh training knowledge! Scope of Delivery - 2-day training and machine installation - Day 1: up to 8 hours – commissioning and control training - Day 2: up to 8 hours – independent machine operation under supervision of our technician – possibility to program specific details - Consultation with our specialists - By phone: from 7:30 to 21:00 (Mon–Sat) – an 8-hour package to be used within 12 months - Online: from 7:30 to 14:30 (Mon–Fri) – an 8-hour package to be used within 12 months - Access to Otinus Academy online courses - LibreCad – access valid for 12 months Additionally included - CAD drawing package

Stanje: novo, Leto izdelave: 2024, Many of our machines are available from stock. Call us to learn more! The offer relates to the base version of the machine. All optional equipment and their prices can be found on our website. Fiber tube laser for profiles FLV-T-6012 1.5kW Technical specifications - Maximum profile height: 120 mm - Maximum profile length: 6000 mm - Positioning accuracy of X and Y axes: ±0.05 mm/m - Repeatable positioning accuracy of X and Y axes: ±0.03 mm Iedjtiy A Aopfx Amusig - Maximum acceleration: 0.0G - Power output: 1.5 kW - Power requirement: 24.0 kW - Laser source brand: Raycus or MAX Photonics, selectable - Power supply: ~3x400 V 50 Hz - Protection class: IP54 Construction The machine is highly stable thanks to its welded frame. High-speed head movement with high precision is ensured via Japanese Fuji servo drives. Automatic lubrication system for axis guides. Convenient operation Loading heavy sheets is made easier with transport balls integrated into the worktable, enabling smooth sliding when loading. Picking up small finished parts is also much easier, thanks to carriages that can be conveniently pulled out using a practical handle located under the machine. RayTools cutting head with autofocus Otinus Protect (optional*) This product provides individual protection for your laser source. With this service, you can ensure uninterrupted operations in your facility. We safeguard your business so you can complete orders on time. Voltage stabilizer (optional*) Control panel The system runs with Windows 10 and CypCut software, featuring functionalities such as design, file import/export, and workflow optimization. All installed programs come with lifetime licenses. The machine comes equipped with a wireless controller. Professional support We make sure to stay in regular contact with our customers. Upon purchasing a machine, we offer an hourly package for professional support from Otinus technicians. Otinus Academy learning software When you purchase this machine, you receive one year of access to online training courses, making it easy to onboard new employees or refresh knowledge from trainings! Scope of delivery A 2-day training and machine installation - Day 1, up to 8 hours – Commissioning and training on the control system - Day 2, up to 8 hours – Independent operation of the machine under supervision of our technician, including programming possibilities for specific parts Consultation with our specialists - By phone: from 7:30 am to 9:00 pm (Mon-Sat) – 8-hour package, to be used within 12 months - Online: from 7:30 am to 2:30 pm (Mon-Fri) – 8-hour package, to be used within 12 months Access to Otinus Academy online courses - LibreCad – access for 12 months Additionally, you receive - CAD drawing package