Swt Maschinenbau / Häwa Stroj Za Odstranjevanje Lubja nakup rabljenega (87.904)

Stanje: rabljeno, Leto izdelave: 2000, Brushes - Diameter 250 mm Brush width 80 mm Speed range 1500 / 3000 rpm Operating voltage 380 Volt Total power requirement 2.0 / 3.0 kW Machine weight approx. 175 kg Space requirement approx. 800 x 400 x 1,300 mm Equipment/features: - Deburring of manageable/convenient sheet metal parts with notches and contours - Sheet thicknesses up to 6.0 mm can be quickly and reliably rounded - Without forming a secondary burr - The sheet metal to be processed is guided manually with slight pressure along the rotating deburring brush - Simple radial brush rotation with high speed - Suitable materials: steel, stainless steel, aluminium, other non-ferrous metals Isdpfx Aaexaa Ifj Uoar * Machine link: ?machineno=1008-9238987

Stanje: novo, Brushes - Diameter Ø 250 mm Brush width 40.0 mm Speed range 2850 rpm Operating voltage 400 Volt Total power requirement 1.3 / 1.8 kW Machine weight approx. 36.0 kg Space requirement approx. 415 x 467 x 356 mm Features: - Deburring of single parts and small batches - Deburring of straight round, rectangular, and square tubes, as well as flat materials - Heavy-duty, durable industrial design - Maintenance-free motor - Long service life and smooth operation due to balanced rotor - Equipped with high-quality ball bearings - Storage shelf for safety goggles - Incl. 1 multipurpose wire brush, wire diameter 0.35 mm - Operating manual included Iaedpfx Aoxaamnsa Ujr

Stanje: novo, Idealna dopolnitev za vaš brusilni / odstranjevalni stroj (ustrezen odstranjevalni stroj imamo tudi na zalogi :)!) Iaedjx Diiaopfx Aa Uor Mokri ločevalnik znamke Ulmatec Material za odsesavanje: jeklo / nerjaveče jeklo / aluminij, suh prah Elementi, ki pridejo v stik z vodo, so iz nerjavečega jekla. Upravljanje preko zaslona. Motor: 7,5 kW, 400 V, 50 Hz, IE3 Maks. zračna količina: pribl. 11.000 m³/h Maks. podtlak: pribl. 4.000 Pa Sesalni nastavek: Ø 355 mm Izpust: izpustni ventil Polnjenje: Samodejno preko magnetnega ventila Vključuje: Hepa naknadni filter (predelava nerjavečega jekla) Atex izvedba (npr. pri obdelavi aluminija) Brez cevovodov Razdalja odsesavanja - stroj največ 10m Priklop na lastno omrežje izvede stranka.

Stanje: rabljeno, Wide Belt Sander Used Make: TimeSaver Model: WRB Series Machine No. 2480-19 Dry-working deburring/edge rounding machine with contact rollers and a rotary brush unit Max. working width: 1350 mm Abrasive belt dimensions (W x L): 1350 x 1900 mm Brush outer diameter: 530 x 350 mm Table opening: 0.8–100 mm Ijdpfx Aoudb R Isa Ujar Min. part size: 50 x 50 mm Brush speed: 6–17 m/sec Abrasive belt speed: 11 m/sec Feed speed: 0.2–8 mm/sec Power consumption: Unit W: 11.0 kW Unit RB: 1.5 kW Brushes: 4 x 1.5 kW Connection: 400 V, 50 Hz Compressed air required: 6 bar Total consumption: 25 l/min Including ceramic brush set R plus 350 x 530 mm and zirconium brush set, grit 180 Machine has been completely overhauled (refurbished) New conveyor belt installed Application Area: Abrasive belt roller unit W: Pre-deburring with abrasive belt or Scotch-Brite belt Removal of heavy burrs Applying a sanding or brush finish Repairing a sanding or brush finish RB unit: Deburring and edge rounding of flat and contoured parts Weight: 6,200 kg

Stanje: novo, Leto izdelave: 2025, Available from stock! Deburring and fine grinding machine with 3 working stations: Abrasive belt – Brush station – Abrasive belt Effective maximum working width: 1150mm Standard workpiece thickness: 0.8 – 150mm Digital workpiece thickness display on the control panel, accuracy 0.1mm Adjustable pressure rollers before and after the working stations Abrasive belt insertion on the left Abrasive belt centering by electronically controlled photo cell, emergency stop in case of tracking error or belt breakage Infinitely variable conveyor feed speed Includes the following options: Preparation of machine base for forklift loading Extraction collector in galvanized sheet metal for machine with 3 working units plus 1 external unit Iodpfx Aaopwh Tfs Ujar Vacuum device to increase the adhesion of small or slippery workpieces on the feed belt. Includes perforated feed table and belt, as well as a high-performance electric fan and sound-insulated outlet in accordance with CE standard, 5.5kW 2x Grit-Set for electronic fine positioning of the contact rollers Adjustment and display (0.01mm) on the operator panel, stand-by position with pneumatic return of the contact roller in case of emergency stop Frequency controlled drive motors for abrasive belt cutting speed, motor power per unit: 11kW Electronic adjustment of the brush unit HMI Vision – PLC control with visualization of various machine settings via color touch screen Storage capacity of up to 250 grinding programs

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, skupna višina: 1.200 mm, skupna širina: 580 mm, skupna dolžina: 820 mm, vhodna napetost: 230 V, Stroj je namenjen izkoščičevanju sliv, pri čemer slive ostanejo cele. Električni priklop: 230 V. Iedpfew H I Trsx Aa Uear Dimenzije stroja (mm): 820 x 580 x v1200. Stroj je bil prvotno opremljen z 10 rezili, a sta bili že ob nakupu 2 rezili izgubljeni, kar nikakor ne vpliva na delovni proces. Le izkoristek je nekoliko manjši. Produktivnost z 8 rezili: 100 sadežev / 1 minuta Premer odprtine: 30 mm. Teža stroja: 100 kg.

Leto izdelave: 2025, stanje: novo, Working width: 950 mm Maximum workpiece thickness: 1.0 – 50 mm Abrasive belt width: 970 mm Abrasive belt length: 1900 mm Machine weight: approx. 1.8 t Iajdpfx Asvfhm Dja Ujr The SMD 123 RE is a universal entry-level machine designed for deburring, uniform all-round edge rounding, and surface grinding of sheet metal in dry processing. * Suitable for processing steel, stainless steel, and aluminum. * The non-slip conveyor belt ensures safe transport and processing of even small workpieces. * The two rotary heads provide uniform edge rounding on all sides and a non-directional surface finish. * Intuitive touch panel operation enables any operator to quickly become familiar with the machine. * SMD 1 models are quickly installed and ready for operation. * The compact design saves valuable production space. * Low acquisition and operating costs result in short payback periods and guarantee economical processing of your workpieces. Includes: - SMD 123 RE grinding machine (kit) - SMD 123 RE conveyor belt cleaning unit - SMx xx3 – sanding belt +120 Cubitron II, width 970 mm, length 1900 mm - SMD 1x3 set of 3-piece abrasive flap roller P120 - DDE 3002 dry extraction system - Standard piping DDE 3002 / WDE 3002 for SMD 123, SMD 133 Additional detailed technical data available on request. The machine is available for immediate delivery from stock in Niederlangen.

Stanje: novo, Diameter -- mm Workpiece length -- mm Workpiece width 0 - 20 mm Rotational speed 2850 rpm Angle range 0 - 60° (stepless) Machine weight approx. 19.5 kg Maximum chamfer width 20 mm + face machining Designed for chamfering and deburring straight edges, for so-called FACING – the removal of an unwanted material layer on the end face of the workpiece, such as occurs during flame cutting of sheet metal. Specifically developed for producing visible bevels and weld seam preparations. Powerful electric drive for extreme loads. * High-performance motor * Stepless adjustment of the working angle in the range of 0° - 60° * FACING – edge processing at 0° angle for removing unwanted material layers after flame cutting * Unique mechanical scale for setting chamfer width for greater precision * Very compact and ergonomic design for high working productivity * Surrounding protective frame to prevent damage and provide versatile grip options * With suitable accessories, pipes from D=150 mm can also be machined * Additional adjustable handle - Chamfer width (hypotenuse): 0 - 20 mm = 400 MPa / 0 - 16 mm = 400 MPa - Motor: 1100 W We are also pleased to offer you an optional pipe beveling attachment (D=150mm) for this device. Ijdpfeppgcvox Aa Uoar

Stanje: novo, Diameter -- mm Workpiece length -- mm Workpiece width 18 mm Angle range 15° - 50° Machine weight approx. 110 kg Beveling System UZ18 HARDWORKER Maximum bevel width 18 mm with automatic feed The UZ18 Hardworker is one of the most powerful automatic-feed beveling machines available on the market. It is suitable not only for workshop use but also for on-site assembly. The machine features a stepless adjustable bevel angle system. Thanks to its specially designed drive system, the UZ18 Hardworker is suitable for tougher materials as well. The machine is equipped with automatic feed, making operation with the UZ18 Hardworker highly comfortable. * For conventional steel (up to a strength of 600 MPa/87,022 PSI), brass, copper, and aluminum materials * For beveling workpieces with minimum dimensions of 70 x 150 x 6 mm * Suitable sheet thickness range: 6 – 40 mm * The bevel angle can be easily and steplessly adjusted from 15° to 50° without the need to replace any parts * Double-sided beveling (X, K geometry) without material handling * Easy connection to a 3D manipulator for simplified operation and handling * Silent operation * Equipped with automatic feed * Suitable for stationary or mobile use * The machine processes large workpieces without additional support at a speed of 1.9 m/min * Smaller workpieces are inserted directly into the machine - Max. bevel width (hypotenuse): 18 mm Iaodpsk Egrtsfx Aa Usr - Steplessly adjustable angle: 15° - 50° - Sheet thickness range: 6 – 40 mm - Motor: 750 W - Feed speed: 1.9 m/min - Weight: 110 kg - Dimensions: 438 x 719 x 644 mm We are happy to offer you an optional mobile 3D manipulator for this unit upon request.

Stanje: novo, Diameter -- mm Workpiece width -- mm Workpiece length -- mm Isdpfx Aaor I E Exe Ujar Chamfering System UZ30 EXPRESS Maximum chamfer width 30 mm with automatic feed Stationary UZ30 EXPRESS is one of the best solutions for chamfering large and small batches, as well as small parts or long and narrow flat bars. The UZ30 EXPRESS can be used not only for chamfering, but also for deburring. Thanks to the unique geometry of the milling cutter, the feed rate can be adjusted to up to 3.5 m/min. For longer workpieces, it is possible to equip the machine with an additional infeed and outfeed table, increasing the working area to an impressive 2,824 mm. - Designed for chamfering steel, aluminum, copper and other materials, flat bars, pipes, and welding bevels - Chamfering performed by high-quality milling (mirror finish) - Feed control via rotary knob - Cutter speed controlled via frequency inverter - Further optional accessories available for pipe chamfering - Option to extend the work table to a total of 2,824 mm - Fast and precise machine adjustment via gauge Technical Data: Approximate values of maximum chamfer width: at 30° – 30 mm, at 45° – 20 mm, at 60° – 17 mm Adjustable chamfer angle: 30° – 60° (constant) Application range – sheet thickness: 3 – 100 mm Pipe chamfering: OD 102 mm – OD 156 mm Milling motor power: 4,000 W Milling head speed: Adjustable via rotary knob (frequency converter) Feed rate: 0.6 – 3.5 m/min Weight: 400 kg Dimensions: 825 x 1200 x 1615 mm Number of indexable inserts: 5 pieces

Stanje: novo, Diameter -- mm Workpiece length -- mm Workpiece width 15 mm Angle range 15-50° Sheet thickness 6-40 mm Total connected load 1.5 kW Feed speed 3.5 m/min Dimensions 530 x 395 x 860 mm Machine weight approx. 94 kg The UZ15 RAPID machine is one of the fastest bevelling machines with automatic feed on the market. It is suitable not only for workshops, but also for on-site assembly jobs. It features an infinitely variable bevel angle adjustment system. Additionally, the machine is equipped with an automatic feed, making operation with the UZ15 Rapid very convenient. - Suitable for conventional steel (up to a strength of 600 MPA/87,022 PSI), brass, copper, and aluminium materials - For bevelling workpieces with minimum dimensions of 70 x 150 x 6 mm - Operating range for sheet thickness 6–40 mm - The bevel angle can be easily adjusted steplessly from 15° to 50° without changing any parts - Double-sided bevel (X, K) without material handling - Simple connection to the 3D manipulator for easier operation and handling Iajdpjk Uqhasfx Aa Uor - Silent operation - Equipped with automatic feed - For stationary or mobile use - The machine can work with large workpieces without any support at a speed of 3.5 m/min - Smaller workpieces can be inserted directly into the machine - Discounted price when purchasing the UZ15 RAPID together with the 3D manipulator

Stanje: novo, Diameter -- mm Workpiece length -- mm Workpiece width 0 - 3 mm Spindle speed 3600 rpm Angle range 30 - 60° (stepless) Machine weight approx. 31 kg Space requirement approx. 530 x 420 x 410 mm Maximum chamfer width of 3 mm - Mechanically adjustable chamfer angle Designed for deburring and chamfering steel parts and workpieces. Suitable for processing various materials. Robust and stable machine construction. * Scale for setting machining depth * Safety cover * Adjustable machining angle * For steel, stainless steel, aluminium and other materials * Precise, heavy-duty and extra-long mechanical guide - Number of indexable inserts: 5 pieces (four-edged) - Feed: manual Iaodjppgcrspfx Aa Ujr

Stanje: novo, Diameter -- mm Workpiece length -- mm Workpiece width 12 mm Angle range 30/45/22.5/37.5/50 ° Machine weight approx. 30 kg Beveling System UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest beveling machines with automatic feed on the market. Thanks to its compact size and low weight, it is suitable not only for workshops but also for on-site assembly. The machine is equipped with an automatic feed, making operation with the UZ12 ULTRALIGHT very comfortable. * For conventional steel (up to a strength of 600 MPa/87,022 PSI), brass, copper, and aluminum materials * For beveling workpieces with minimum dimensions of 65 x 60 x 3 mm * Operating range plate thickness: 3 – 35 mm * Beveling pipes from an internal diameter of 95 mm * Variable adjustment of the desired bevel via interchangeable holder kit for each given angle * Double-sided bevel (X, K) without material handling * Quiet operation * Equipped with automatic feed * For stationary or mobile use * The machine processes large workpieces without any support at a speed of 1.8 m/min * Smaller workpieces are placed directly into the machine * Lightweight and compact design, can be handled by a single operator * Thermal motor protection - Max. bevel width (hypotenuse): 12 mm Iaodpfsppgcyox Aa Uor - Bevel angle: 30° / 45° / 22.5° / 37.5° / 50° (interchangeable KIT) - Working range plate thickness: 3 – 35 mm - Motor: 400 W - Feed rate: 1.8 m/min - Dimensions: 470 x 294 x 523 mm Optionally, we would be glad to offer you a 3D manipulator (mobile) for this device.

Leto izdelave: 1985, stanje: potreben popravila (rabljeno), Removing machine for thread taps Isdji Huvhepfx Aa Usar - Sold as seen, in current condition - Power consumption: too high, machine offered as a source of spare parts - Manufacturer: Electro ARC, removing machine for thread taps or similar tools - Clamping table: 660 x 460 mm - Throat depth: 250 to 480 mm - Column diameter: 70 mm - Dimensions: 930/780/H2045 mm - Weight: 402 kg

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, This robust professional cable stripping machine, type KM1-F, cuts electrical cables with a diameter ranging from 1 to 70 mm. This model features speed regulation by means of a frequency inverter. - The blades are hardened, so they do not become blunt quickly when stripping armored cables. - There are 15 different cable feed slots. - The rollers are grooved on the inclined surfaces, providing better grip on the cables. - The cable is cut from both sides, making it easy to remove the copper core. - You can also strip rubber and flat cables with this machine. - The machine meets all safety requirements. - A comprehensive service manual and user instructions are included. - The manual also includes maintenance instructions. Technical specifications: Mains voltage: 230 V ~ 50 Hz Power: 2200 W with gearbox drive Dimensions: 60 cm long x 75 cm wide x 90 cm high Machine speed: adjustable Output: Depending on cable type, between 400 and 1200 kg/day Weight: 185 kg Price includes VAT Spare parts such as blades, drives, bearings, etc. are also available. Maintenance can be carried out by us upon request. A machine that is ready to use immediately and easy to operate. Iasdsyfw Egopfx Aa Ujr If you would like to test it, please bring your own cable.

Stanje: kot nova (razstavni stroj), obratovalne ure: 170 h,

Stanje: novo, Timesavers Series 12 WW The machine is equipped with two abrasive belt stations, allowing you to use Station 1 for preliminary grinding—to remove heavy burrs and splatter—and Station 2 to achieve a surface finish on the part. The conveyor carpet transport speed is infinitely adjustable. The table opening can be adjusted from 0.8 to 100 mm. Iajdpfx Ajwqf U Uja Uer

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 7.464 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0041, dolžina podajanja os X: 400 mm, dolžina pomika po osi Y: 400 mm, dolžina podajanja os Z: 600 mm, teža obdelovanca (maks.): 20 kg, No reserve price – guaranteed sale to the highest bidder! Isdpfx Aaewrr Tye Usar TECHNICAL DETAILS Working Area Cubic travel: 400 x 400 x 400 mm Electromechanical Adjustments Adjustment in Z direction: up to 600 mm manually Travel in X and Y directions: ±200 mm each Rotation around A and B axes: ±45 degrees each Adjustment speed: 1 m/s Load capacity: 20 kg Operation Control system: BOSCH REXROTH Connection Data Connected load: 21 kVA Operating voltage: 400 V

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 400 V, delovna širina: 1.100 mm, skupna masa: 1.300 kg, širina obdelovanca (maks.): 600 mm, priključek za stisnjen zrak: 6 letvica, najv. debelina pločevine: 40 mm, število prejšnjih lastnikov: 1, vrsta nastavitve višine: električni, dolžina mize: 3.000 mm, višina mize: 850 mm, širina mize: 600 mm, trajanje garancije: 3 meseci, Mode of operation: dry Iodew U A Dmopfx Aa Uoar Application description: Deburring of steel and stainless steel components Year of manufacture: 2007 Standards: CE, EC Machinery Directive 98/37/EC, VDE Units of measurement: mm, bar Operating instructions: 1x manual Paintwork: RAL 9002 white (textured), outfeed table RAL 5010 gentian blue Planetary head station with 3 units: Planetary head design, each with 6 tools, drive power 1.3 kW per unit; speed frequency-controlled 100–300 rpm, disc station with electric height adjustment. Technical data: Working width: 1100 mm Table height adjustment: 0.55 kW Planetary head adjustment drive: 0.18 kW Feed drive: 1.3 kW (Lenze Motec) Conveyor belt dimensions: 1100 x 3000 mm (highly wear-resistant design) Workpiece thickness: 0.8 – 40 mm Constant working height: 850 mm Compressed air connection: 6–7 bar Operating voltage: 3x400 Volt/N/PE/50 Hz Control voltage: 24 Volt DC Infinitely variable feed 0.5–5 m/min, frequency-controlled, automatic workpiece thickness adjustment with start-up switch (Joucomatic), 400 mm outfeed table with integrated brush for conveyor belt drive 0.25 kW, DC brake Height adjustment gearbox, vacuum blower, unit locking, belts replaced – machine is fully operational and in very good technical condition. Set according to manufacturer’s specifications/standards. Sale includes a mechanical functional warranty of 3 months from delivery.

Stanje: novo, Leto izdelave: 2025, skupna dolžina: 1.450 mm, skupna širina: 800 mm, skupna višina: 1.800 mm, skupna masa: 500 kg, moč: 4,75 kW (6,46 KM), FC 120 ZK Working capacity: Ø 120x120 mm, Number of belt stations (Z): 1, Number of brush stations (K): 1, Abrasive belt dimensions: 120x1850 mm, Brush belt dimensions: 120xØ200 mm, Abrasive belt speed: 20 m/s, Ijdpfxet D D Nzj Aa Usar Brush belt speed: 15 m/s, Feed speed: 12 m/s, Abrasive belt motor per head (x1): 3 kW, Brush motor per head (x1): 1.5 kW, Feed motor: 0.25 kW, Total power: 4.75 kW, Current consumption: 12A, Dust extraction port per head Ø (2x): 80 mm, Dimensions: 1450x800x1800 mm, Weight: 500 kg

Leto izdelave: 2015, stanje: dober (rabljeno), Deburring machine, used Manufacturer: NS Maquinas Industrial Model: DM 1600 DC Year of manufacture: 2015 Working width: 1600 mm Minimum part size: 50x50 mm Iaedpfxeikm Tks Aa Uor Power: 8 kW Number of cross-belt stations: 1 Cross-belt speed: 2–8 mm/s Feed speed: 0.6–3.2 mm/s Extraction unit: Donaldson Performs edge rounding and removes sharp edges on both external and internal contours of parts made from stainless steel, steel, or aluminum, which have been cut by a laser, shear, or punching machine. Dimensions: 2730x1740x1940 mm Weight: 1790 kg.

Stanje: dober (rabljeno), Leto izdelave: 1995, Model: Rotomat 180 Manufacturer: Egon Wutzke, Zell a. A., Germany Machine type: Bürst-Entgratemaschine (deburring and brushing machine) Article number: 609 101-04 Serial number: 1071 Year of manufacture: 1995 Main components: - Main switch – red rotary knob (positions 0/1) - Fault indicator – signals machine error - Power indicator – power-on control lamp Brush rotational speeds: I: 800 rpm II: 1600 rpm Working width: approx. 180 mm (designation “180”) Type of processing: brush deburring (suitable for metal, aluminium, steel, plastics) Power supply: 400 V / 50 Hz (three-phase) Motor power: approx. 2.2 – 3.0 kW (depending on version) Speed adjustment: 2-stage (800 and 1600 rpm) Dust extraction connection: yes (extraction nozzle visible at the rear of the machine) Safety features: emergency stop, mechanical interlocks, fault indication 🔹 Typical applications - Removal of sharp edges after laser cutting, punching, or milling - Processing of small and medium-sized metal parts - Surface preparation before painting, galvanizing, or welding For sale: EWU Rotomat 180 Deburring Machine Offered for sale is a brush deburring machine – EWU Entgrattechnik Rotomat 180, year of manufacture 1995, produced by Egon Wutzke (Germany). The machine is fully functional, used, has been serviced, and is ready for immediate operation. Technical specifications: • Model: Rotomat 180 • Manufacturer: Egon Wutzke / EWU Entgrattechnik • Year of manufacture: 1995 • Serial number: 1071 • Motor power: approx. 2.2 kW • Power supply: 400 V / 50 Hz (three-phase) • Rotational speeds: 800 / 1600 rpm (2 ranges) • Max. workpiece size: Ø 180 mm / square up to 127 mm • Dimensions: approx. 950 × 1125 × 1270 mm • Weight: approx. 350 kg • Hour counter: [enter current reading – shows 4451 h in the photo] • Equipment: nozzle for dust extraction connection Applications: • Deburring and rounding of edges of pipes, profiles, steel and aluminium parts • Edge finishing after cutting, punching, or milling • Surface preparation prior to painting, galvanizing, or welding Iajdpfx Aasw Uabij Uor Condition: • Machine in good technical condition • Electrical system and controls fully operative • Ready for use, inspection and testing possible on site

Stanje: rabljeno, Deburring and fine grinding machine for sheet metal / flat material, new The compact machining center for deburring, slag removal, derusting, oxide layer removal, edge rounding, fine grinding, and even polishing of metal surfaces. Thanks to its fixed working height, this machine can be optimally integrated into a production line and is suitable for processing large parts. Working width: 1350 mm Maximum part weight: 400 kg Wide belts with abrasive belt length: 2620 mm Standard with vacuum holding system, optional with magnetic holding system The use of 2620 mm long abrasive belts provides a consistently smooth surface and reduces consumable costs, as the belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's processing task. Iaedom Rpy Rjpfx Aa Ujr The machine structure can accommodate up to 3 internal processing units and an additional external processing unit. The high rigidity of the machine structure and feed table, combined with advanced mechanics and electronics, make this series a universal machining center for deburring and finishing. Please contact us for further information and photos via mail(at) or

Stanje: rabljeno, Deburring and Fine Grinding Machine for Sheet Metal / Flat Material, new The compact machining center for deburring, slag removal, derusting, oxide layer removal, edge rounding, fine grinding, and polishing of metal surfaces. Thanks to its fixed working height, this machine can be optimally integrated into a production line and is suitable for processing large components. Working width: 1150 - 1350 mm Maximum part weight: 500 kg Wide belts with abrasive belt length: 2620 mm Equipped as standard with a vacuum holding system, optionally with a magnetic holding system The use of 2620 mm long abrasive belts ensures a consistently smooth surface finish and reduces consumable costs due to the belts' longer lifespan. Thanks to the modular design of the machine, the optimal configuration for the customer's processing requirements can be offered. The machine structure can accommodate up to 5 internal processing units and 2 additional external processing units. Iedjnah Tdspfx Aa Uoar The high rigidity of the machine frame and feed table, in combination with advanced mechanics and electronics, make this series a universal machining center for deburring and final finishing. Please contact us for further information and images via email (at) or *

Stanje: rabljeno, Deburring and Fine Grinding Machine for Sheets / Flat Material, New Isdsnah Taspfx Aa Uoar The compact machining center for deburring, slag removal, descaling, oxide layer removal, edge rounding, fine grinding, and polishing of metal surfaces. This machine is suitable for heavy-duty applications. Thanks to its fixed working height, the machine can be seamlessly integrated into a production line and is suitable for processing large workpieces. Working width: 650 – 1650 mm Maximum workpiece weight: 2000 kg Wide belt with sanding belt length: 3250 mm Comes standard with a vacuum holding system; optionally available with a magnetic holding system. By using sanding belts with a length of 3250 mm, you achieve an even, smooth surface and reduce consumable costs, as these belts have a longer service life. The modular design of the system allows us to offer the optimal configuration for the customer’s machining requirements. The machine frame can accommodate up to 5 internal processing units and 2 additional external processing units. The high rigidity of the machine structure and feed table, combined with advanced mechanics and electronics, make this series a universal machining center for deburring and finishing. Please contact us for more information and images via email (at) or