Stiskalnica Za Prebijanje nakup rabljenega (89.898)

Stanje: novo, Leto izdelave: 2026, AREA - CARCASE PRESS GANNOMAT "CONCEPT 70 EASY 170" Complete in standard version with: - Sturdy, torsion-resistant frame made of steel, welded and bolted construction - SIDE press beam with continuous pressure surface and 25 mm thick, coated support plate - Counterpressure surfaces (side pressure wall, bottom) are 25 mm thick, coated, continuous support plates - Electromotive adjustment of the press beam via precision trapezoidal-thread spindles (with increased pitch and running accuracy) and high-performance slide nuts with grease reservoir - Pressing is performed electromotively via worm gear motor (0.75 kW) - Pressing force of the press beam can be continuously adjusted electronically via potentiometer and regulated via frequency inverter, therefore press force control is completely wear-free - Press force for vertical press beam min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Press and adjustment speed of the press beams with fine positioning, via 3-position selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of the press beam, e.g., for low pressing forces such as drawers, etc. - Very easy operation via two separate pushbuttons; two motion sequences (open/close) can be selected via the controller - Freely adjustable pressing time preselection 0-30 min (switchable to seconds or hours) with individually programmable opening dimensions for both press beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Njdpfx Ajw Sgnkjliewi Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Availability: short-term

Stanje: novo, Leto izdelave: 2026, Super special price, as the machine was operated during our in-house exhibition. Operating hours: 2 Immediately available – subject to prior sale Once it’s gone, it’s gone! Compact design, high reliability, and excellent value for money: These are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foam, or paper. Special feature: the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Overall dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput capacity (kg/h): 30-40 Hydraulic oil volume (l): 100 Weight (kg): 530 Equipment: Press Powerful press mechanism with low-wear, chrome-plated jaws Pre-compactor with end-position damped cylinder and bolted cover Control cabinet with PLC control Hydraulics Nsdpfslht H Eox Aliswi Separate oil tank with pump motor and valve control Safety switch for oil temperature Bin with agitator and gearbox motor Screw channel with discharge screw and gearbox motor Accessories: Briquette length monitoring Automatic on/off Location: 54634 Bitburg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Technical data: Laminated carcass press from our showroom; Working range: Width from 150 - 2,550 mm, Height from 150 - 1,400 mm; Depth from 150 - 700 mm; Variable pressing force adjustment 300/700/1100/1400/1800/2200 daN (kg) for the side pressing beam; Variable pressing force adjustment 500/800/1200/1500/1900/2200 daN (kg) for the upper pressing beam. Easy operation via 6 separate pressure buttons, freely adjustable pressing time preselection with automatic opening function, loading height 300 mm. Nsdeb Eln Dopfx Alijwi The machine is available for immediate delivery from our showroom. Location: ex stock 54634 Bitburg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2026, obratovalne ure: 1 h, Super special price, as this unit was run at our in-house exhibition. Operating hours: 1 Immediately available – subject to prior sale. Once it's gone, it's gone! Compact design, high reliability, and an excellent price-performance ratio: these are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foam, or paper. A key feature: the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Nwodpfx Aljtnz Ttoiji Throughput capacity (kg/h): 30-40 Hydraulic oil volume (l): 100 Weight (kg): 530 Equipment: Press: - High-performance pressing mechanism with wear-resistant, chrome-plated jaws - Pre-compactor with end-position dampened cylinder and bolted cover - Control panel with PLC control system Hydraulic system: - Separate oil tank with pump motor and valve control - Safety switch for oil temperature Container with agitator and gear motor Screw conveyor channel with discharge screw and gear motor Accessories: - Briquette length monitoring - Automatic on/off Location: 54634 Bitburg

Stanje: novo, Leto izdelave: 2025, Gannomat Concept 70 Eco Lamella Case Clamp with Rapid Traverse Nwjdpfxjiidm Ne Alisi Technical Data: Lamella case clamp from our showroom; Working range: Width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly glued carcass joints - Counterpressure surfaces: continuous, coated support plates, 40 mm thick - Pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and set using a frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Included Option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated in the pressure beams. Pressing speeds: 5/10/25 mm/sec; rapid traverse speed: 50 mm/sec. Sensors can be deactivated for special workpiece clamping. - Jog mode for precise positioning of both pressure beams, e.g., for low pressing forces, drawer boxes, and 45-degree carcasses. Simple operation via 6 separate pushbuttons. Freely adjustable pressing time pre-selection with automatic opening, loading height 300 mm. The machine is on display at our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - available immediately -

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, new hydraulic hot press Manufacturer: ITALPRESSE Type XL/6 30-13 with gold-anodized plates Touch display control - Electric heating plates 3,000 x 1,300 mm - Total pressing force 90 t - Number of heating plates: 2 pcs. - Number of levels: 1 pc. - Cylinder stroke: 350 mm - Daylight opening: 350 mm - All-round loading capability - Number of hydraulic cylinders: 6 pcs. - Cylinder diameter: 85 mm - Hydraulic unit power requirement: 3 kW - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating power: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V / 50 Hz - Safety standards according to CE Standard equipment: - Movement of the press table by rack-and-pinion and parallel guideways at 2 corners, made of self-lubricating material - Electronic control unit with touch screen for machine operation and monitoring - Digital timer for adjusting pressing time and automatic opening - Digital input and monitoring of pressing pressure Nwedpfexgbxfsx Aliji - Digital timer for setting pressing duration - Digital fault diagnostics and error display - Safety circuit with two-hand control - Emergency safety cable - Safety holder for lower press table Included accessories: - Touch Screen TS/400 - EFC Electronic Flatness Control - Gold-anodized heating plates (Busse) Location: ex works - immediately available -

Stanje: novo, Leto izdelave: 2026, Weima Briquetting Press TH 714 The TH 714 machines are designed for operations requiring throughput capacities of up to 150 kg/h. The robust press housing enables the production of high-density briquettes from materials such as wood, polystyrene, foams, light metals, paper, or biomass. Numerous additional options can be implemented, such as an oil cooling system for multi-shift operation. All machines are available in both left- and right-hand designs. Installation on a stable base frame ensures quick setup and allows for mobile use. User-friendly operation thanks to Siemens PLC control To uphold our performance promise, we design and manufacture all control cabinets ourselves at our Ilsfeld location, equipping them with reputable international components. This guarantees the highest quality in a compact build. The Siemens PLC control system is perfectly tuned to the requirements of the briquetting process. Foreign-object-resistant conveyor screw via cardanic suspension The conveyor screw, which transports material into the briquetting press pre-compactor, is mounted on a cardan joint. This prevents foreign objects from damaging the conveyor screw. As always, the choice of mounting depends on the specific application. For metal processing, for example, we often recommend rigidly mounted screws. Briquette diameter (mm): 70 Nwedpjil Hggsfx Alisi Throughput capacity up to (kg/h): 150*1 Hydraulic motor (kW): 11 Oil volume (litres): 250 Weight (approx. kg): 1100 Location: Ex stock 54634 Bitburg - immediately available - Subject to prior sale

Stanje: novo, Leto izdelave: 2026, Your Advantages - Stable pressing mechanism with low-wear, chrome-plated pliers - Press chamber wear bushing - Pre-compactor with end-position damped cylinder and bolted cover - Control cabinet with PLC control Nwedpfocnz U Ejx Aliei - Screw channel with discharge auger - Separate oil tank with pump motor and valve control - Safety switch for oil temperature - Mounted on a stable base frame with rubber feet - Briquette length monitoring Robust design, low-maintenance technology, minimal space requirement: The machines of the C-series are particularly suitable for small and medium-sized businesses with a required throughput rate not exceeding 50–80 kg/h or 200 to 400 kg/day. Practically any suitable material can be briquetted, such as wood, styrofoam, foam materials, paper, or biomass. All machines are available in left- or right-handed configurations. Mounting on a stable base frame ensures quick installation and enables mobile use. Briquette diameter (mm): 50 Throughput rate up to (kg/h): 50 (depending on material) Hydraulic motor (kW): 5.5 Auger motor (kW): 0.55 Oil volume (liters): 100 Weight (approx. kg): 800 Outstanding Features at a Glance - Hydraulics with separate oil tank: Temperature-monitored hydraulic unit, complete valve control, pump motor designed for long operating periods - Briquette length monitoring: Controls briquette length for uniform sizing - Press chamber wear bushing: Prevents wear in the pressing area Location: Ex works – free loaded

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2026, obratovalne ure: 1 h, Super special price, as the machine was operated during our in-house exhibition. Operating hours: 2 Immediately available – subject to prior sale Once it’s gone, it’s gone! Compact design, high reliability, and excellent value for money: These are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foam, or paper. Special feature: the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Overall dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput capacity (kg/h): 30-40 Hydraulic oil volume (l): 100 Weight (kg): 530 Equipment: Press Powerful press mechanism with low-wear, chrome-plated jaws Pre-compactor with end-position damped cylinder and bolted cover Control cabinet with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Bin with agitator and gearbox motor Nwodpjtnz Hbjfx Alioi Screw channel with discharge screw and gearbox motor Accessories: Briquette length monitoring Automatic on/off Location: 54634 Bitburg

Stanje: novo, Leto izdelave: 2026, Compact design, high reliability, and an excellent price-performance ratio: these are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foams, or paper. Special feature: the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput (kg/h): 30-40 Hydraulic oil capacity (l): 100 Weight (kg): 530 Equipment: Press: - High-performance pressing mechanism with low-wear, chrome-plated clamp - Pre-compactor with end-position damped cylinder and bolted lid - Control cabinet with PLC control Nodsbtnf Ejpfx Aliswi Hydraulics: - Separate oil tank with pump motor and valve control - Oil temperature safety switch Tank with agitator and gear motor Screw channel with discharge screw and gear motor Accessories: Briquette length monitoring Automatic On-Off Location: 54634 Bitburg

Stanje: dober (rabljeno), Koda: 0421 Znamka: ORMAMACCHINE Nwsdpozgtpiofx Alioi Model: NPC – v skladu s standardom CE Vroča preša z ogrevanjem s termičnim oljem za obdelavo lesa, mizarstvo, pohištvo, izdelavo pohištva po naročilu, plošč, vrat, kompozitnih materialov in drugih materialov – v skladu s standardom CE Dimenzije plošče: 3000 x 1580 mm Masivne jeklene plošče z ogrevanjem s termičnim oljem Število batov: 6, premer: 85 Odpiranje: 400 mm Ogrevanje plošč z električnim kotlom Potisk: 120 ton Stranski vodniki Plošče, prevlečene s folijo Mylar Celotne dimenzije: 3700 x 1850 x 2600 mm (višina)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Montažna linija za ohišja, sestavljena iz: Pritisna naprava Ligmatech se lahko proda ločeno in je bila izdelana leta 2010, ostali del linije je bil izdelan leta 1996. Poz. 1 Montažna miza s trakom 2500*800 mm in regalom za drobne dele. Poz. 2 Transportni sistem z valji, približno 6000*800. Poz. 3 Postaja za nanašanje lepila na stranice ohišij z 1 lepilno pištolo. Poz. 4 Transportni sistem z valji, približno 4000x800 mm. Poz. 5 Postaja za odlaganje ohišij, približno 3000*800; višina od 850 mm do 300 mm. Poz. 6 Pritisna naprava Ligmatech MPH 510/25/09/S Profiline, izdelana leta 2010, z avtomatskim dovodom in odvodom ohišij (transportni trak), varnostna svetlobna pregrada na sprednji strani. Tehnični podatki stroja: za ohišja z dolžino: 250-2500 mm širino: 250-1000 mm višino: 150 -1400 mm pritisk: 14 KN hitrost pozicioniranja: 25 mm/s delovna višina: 300 mm potreben prostor: 4000 x 750 x 2300 mm teža: 2200 kg Nwsdpfxjzi N Rus Aliei Poz. 7 Postaja za postavljanje ohišij, približno 3000*800 mm. Poz. 8 Transportni trak, 4000*800. Poz. 9 Postaja za izhod ohišij, 1200*800 mm. Poz. 10 Postaja za montažo ohišij, nastavljiva po višini s transportnim trakom, 4000*800.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Briketirni stiskalnik za aluminijeve ali jeklene ostružke Izjemno visok pritisk stiskanja 3.700 kg/cm² 9 kW Velik lijak: 600 x 1500 mm Format briketa: 60 x 40 mm Zmogljivost: Aluminijevi ostružki – do 70 kg/h Jekleni ostružki – do 180 kg/h Njdew Ig Suepfx Alijwi Medeninasti ostružki – do 220 kg/h *odvisno od vhodnega materiala in nastavitev Vključuje: - Kad za emulzijo - Emulzijska črpalka - Oljni hladilnik

Leto izdelave: 1989, stanje: pripravljen za uporabo (rabljen), Na voljo je pnevmatična horizontalna membranska tlačna stiskalnica Bucher za uporabo v živilski industriji. Nazivna prostornina: 100 hl, največja zmogljivost (grozdje): 6000 kg/serija, dimenzije stroja (X/Y/Z): približno 6300 mm/2200 mm/2250 mm, teža: približno 5000 kg. Vključuje centralni sistem za polnjenje in posodo za odtekanje. Možen je ogled na kraju samem. Njdjzl U Nhepfx Alijwi

Stanje: rabljeno, Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Na prodaj je zmogljiva CNC-naprava za obdelavo tuljave DIMECO LINAPUNCH MC-F za avtomatizirano obdelavo materiala v obliki traku neposredno iz tuljave. Naprava je še posebej primerna za ekonomično proizvodnjo perforiranih plošč, montažnih plošč, pritrdilnih profilov, komponent za prezračevanje ter posebej izdelanih stisnjenih delov v srednjih in velikih serijah. Z neposredno obdelavo iz tuljave se znatno zmanjša poraba materiala, čas priprave in stroški na kos. Tehnologija LINAPUNCH združuje prilagodljivost CNC-stiskalne naprave s produktivnostjo neprekinjene linije za obdelavo tuljave. Naprava deluje s standardiziranimi orodji Thick-Turret in omogoča visoko produktivne proizvodne procese. Tehnični podatki Proizvajalec: DIMECO Tip: LINAPUNCH MC-F Vrsta naprave: CNC-naprava za obdelavo tuljave / stiskalna linija Nadzor: CNC, Siemens Simostar 370 Obdelava tuljave Notranji premer tuljave: 508/610 mm Največji zunanji premer tuljave: 1700 mm Največja teža tuljave: 6000 kg Najmanjša/največja širina traku: 170 do 525 mm Debelina materiala: 0,4 do 3 mm Največja dolžina izdelka: 6000 mm Programirljiva dolžina podajanja Servovoden NC-podajalnik traku Avtomatsko vodenje traku Nwodjzmv Dvjpfx Alioi Tehnika stiskanja Stiskalna sila: pribl. 20 t Večosna stiskalna tehnika (osi X/Y) Programirljiv hod stiskalnika Funkcija Auto-Index Funkcija Multi-Index Nosilec za standardna orodja Thick-Turret Število stiskal: 26 kosov Število stiskalnih glav: 1 kos Število rotacijskih orodij: 2 Sestav: Odvijalnik tuljave Naprava za izravnavo NC-podajalnik Stiskalna glava LINAPUNCH MC-F Stiskalne škarje Naprava za nanašanje črnila Naprava za izmet izdelkov 2 dvižni mizi Krmilna plošča s CNC-nadzorom Zaščitna ograja Področja uporabe: Elektroindustrija Proizvodnja omar za nadzorne enote Prezračevalna in klimatska tehnika Obdelava kovin Proizvodnja profilov in komponent Serijska proizvodnja iz materiala v obliki tuljave EXW, pomoč pri razstavljanju in natovarjanju je možna.

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 7926 TEHNIČNI PODATKI Njdpfszmfvuox Aliowi - delovna dolžina: 6200 mm - delovna širina: 150 mm - delovna višina: 1350 mm - 12 vertikalnih hidravličnih cilindrov - mere d/š/v: 6580/1270/2350 mm - teža približno 4000 kg PREDNOSTI – zelo dobro stanje – rabljena preša – ni prebarvana – namenjena profesionalni uporabi Neto cena: 69.900 PLN Neto cena: 16.650 EUR Neto cena izračunana po tečaju 4,2 PLN/EUR (v primeru večjih valutnih nihanj se lahko cena spremeni)

Stanje: pripravljen za uporabo (rabljen), Hertweck P4 Hydraulic Press, Plunger Press You are welcome to visit for an inspection. We are happy to arrange cost-effective shipping for you! Nwjdpfx Ajvux Spjliei You will receive a proper invoice. For international customers, a net invoice can also be issued. The prerequisite is a valid VAT identification number. Subject to prior sale. Visit our shop and view our other offers. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description of the products only. Deviations from technical data as well as errors in the item description may occur and are reserved.

Stanje: dober (rabljeno), Leto izdelave: 2014, Peletna stiskalnica Proizvajalec – TEKNO UNO Nwedpfx Alsvdrtxsiji Model – TK 304 Leto – 2014 Moč motorja – 50 kW Kapaciteta – 450 kg/h

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994, Stroj za izdelavo žebljev Proizvajalec: WAFIOS Model: N90 Leto izdelave: 1994 Območje premera: 2,5-3,8 mm Dolžina žebljev: 50-90 mm Kapaciteta – kosi/min: 800 Stroj vključuje avtomatski rezalnik žice in čistilec žice!! Nwedouhxqmepfx Aliei

Stanje: novo, Leto izdelave: 2026, The Cormak VP3000 gluing press is a robust and efficient machine, perfectly suited for the production of furniture, stairs, and other wooden elements. Its steel construction ensures durability and stability, while easy adjustment and fast movement of the pressing unit provide both comfort and precision during operation. High-performance, fully adjustable hydraulic cylinders Nsdpfx Alewcy U Tjiswi Powerful hydraulic cylinders deliver high pressing force, essential for bonding even thick and hard materials. Full adjustment of the cylinders allows for precise control of the clamping force to meet specific requirements. Hydraulic valves maintain constant pressure Hydraulic valves maintain a steady pressure throughout the entire gluing process, ensuring uniform and durable bonding of glued elements. Constant pressure guarantees safe operation and prevents material damage. Hydraulic pressure gauge included as standard The machine is equipped with a hydraulic pressure gauge, enabling real-time monitoring of the clamping force, which facilitates control over the gluing process. The gauge allows you to accurately set and maintain the desired pressure, resulting in high bonding quality. Sturdy steel construction The steel frame ensures that the device will withstand many years of intensive use. Robust materials guarantee both stability and safety when operating the machine. Easy adjustment of the pressing unit Thanks to easy adjustment, you can quickly and precisely adapt the clamping force to various materials. This translates to better work results and increased versatility of the machine. Pressure lock feature for maintaining constant force The pressure lock allows you to secure the set clamping force, which is particularly useful for repetitive tasks. Technical specifications Overall height: 2040 mm Overall width: 3000 mm Max. clamping height: 1550 mm Min. distance between pressing units: 240 mm Distance from hole to pressing unit: 50 mm Pressure: 6 x 2000 kg Dimensions: 3030 x 450 x 660 mm Total weight: 260 kg

Stanje: rabljeno, Leto izdelave: 1978, rabljen dobro stanje očistil preverjeno delovanje Proizvajalec: Bürkle Tip: U 88 Letnik: 1978 Številka stroja: 3102629 Preizkušen po standardu GS Krmiljenje s tipkami Varnostna vrv na vrhu Električno ogrevanje Specifičen maksimalni pritisk: 80 t Aluminijaste plošče, zlepljene Spodnji bat Število: 6 Njdpszkl Ifjfx Aliewi Približne mere plošče v mm: 2550 x 1300 Približna širina odprtine v mm: 400 Premer bata: 70 Približne dimenzije prostora v mm (D x Š x V): 3100 x 1500 x 1900 Približna teža v kg: 4000 Nahajališče: 97447 Gerolzhofen, brezplačno natovarjanje, brez embalaže. Predaja v trenutnem stanju, kot je bilo pregledano, brez garancije in kakršnih koli jamstev.

Stanje: rabljeno, Maksimalni pritisk stiskalnice: 104 t Delovna dolžina: pribl. 3.100 mm Delovna širina: 4 x 240 mm Maksimalna višina obdelovanca: 490 mm Masivna hidravlična letevna ali nosilna stiskalnica Wemhöner tip VS 4 S za furniranje letev, lepljenje lesa, lepljenih nosilcev ali druge naloge stiskanja. Stiskalnica ima štiri neodvisno nastavljive pritisne površine. Njdpfey Emwaex Aliowi Stroj za nanašanje lepila prav tako na voljo.

Stanje: dober (rabljeno), Leto izdelave: 1981, HEISSPRESSE Nwsdpfx Aljwup U Hjiji PLATTENABMESSUNGEN: 2500 x 1300 mm ERWÄRMUNG DER PLATTEN DURCH HEISSWASSER 6 HYDRAULIKZYLINDER VON DER UNTERSEITE MAXIMALER PLATTENABSTAND: 450 mm GESAMTPRESSDRUCK: 120 Tonnen GUTER ZUSTAND

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 34.000 h, Funkcionalnost: popolnoma funkcionalen, Priložnost! Kot nova Salvagnini S4 / P4 iz prve roke, letnik 2018! Stroj je v brezhibnem, skoraj novem stanju in je takoj pripravljen za uporabo! Sistem je redno servisiran pri Salvagniniju, vzdrževanje je v okviru servisne pogodbe. Tehnični podatki in Salvagnini interna številka: Prebijalni stroj/škarje z rotacijsko postajo S4Xe.30 obsega: Transportni trak TAC30.L2000 Kotna obračalna enota DA30 Prebijalni stroj S4Xe.30 Prebijalna glava H3 Hidravlična pogonska enota HU22E Krmiljenje in upravljanje sistema SiX Pravokotne škarje CS5S Obračalna naprava DF Spodnji cilinder EI09 Enota za vtiskovanje BU30 Dvojni rotacijski prebijalec P2R3132 Dvojni rotacijski prebijalec P2R3334 Enota za navojno valjanje ME35 Naprava za samodejno nanašanje samolepilnih etiket LBC (tiskalnik etiket) Portalni robot MC30 Transportni transporter s krtačami CTS30 Škarjast dvižni mizni transporter TCV3015 Vodno-zračni hladilni agregat R81E Orodja (podroben seznam na zahtevo) P4Xe-3125 Upogibni center z rolno in obračalno postajo obsega: Škarjasto dvižno mizo TCV3015.CT.RPC Naprava za dovajanje in razlaganje PCD3015 Obračalna naprava RIP3015 Upogibni center P4Xe-3125 Zgornji upogibni nosilec LS Spodnji upogibni nosilec LI Programabilni pritiskač U1 Standardna vpenjalna noga NS Krmiljenje in upravljanje sistema SiX Delovno območje s kroglicami SFE Naprava za čiščenje in mazanje upogibnih nosilcev PSE Asimetrično upravljanje za pomožna upogibna orodja za pozitivne gube CLA-A Komplet CLA orodij s "labodjim vratom" UCE1500G38 Asimetrično upravljanje za pomožna upogibna orodja za negativne gube CLA-N-A Nodjzh I Iiopfx Aliowi Komplet CLA orodij s "labodjim vratom" za negativne gube UCE1500NG38 Naprava za V-zarezo RSU.UR-4 Vrtljiva enota za pomožna orodja T Opcija za rezanje in avtomatski izmet profilov CUT.SPC31 T-orodje za 90° upogibe UTZ2 Izmetni/puferski sistem za panele SAP34.POS Sistem vsebuje tečajni trak za centralno odstranjevanje ostankov pločevine. Ti se nato s transporterjem z labodjim vratom prevažajo v nagibne zabojnike. Razvrščanje na nerjaveče jeklo (VA), aluminij in črno pločevino je popolnoma avtomatizirano. Vgrajena je tudi tehtalna enota s prikazom napolnjenosti, ki signalizira stanje preko krmilnika. Ogled in testiranje stroja sta mogoča po dogovoru. Dodatne videoposnetke in podrobne slike sistema z veseljem posredujemo na zahtevo!

Stanje: rabljeno, Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 00026, skupna masa: 400 kg, Specifications: 8 bar Nwsdpewrp Iusfx Alioi 24 V 80 kN 3 K 150 E The Arnold & Shinjo / Multipower Farger & Joosten C-frame press is a powerful and versatile hydropneumatic riveting press, ideally suited for efficient and precise joining of components. Thanks to its robust design and reliable hydraulic technology, it delivers high force transmission for various riveting tasks, making it a valuable solution for production and assembly applications. The press stands out for its user-friendly operation and flexibility, allowing it to be used in a wide range of manufacturing processes.