Seiger Record L Cg 4 - 1800 nakup rabljenega (96.674)

Stanje: rabljeno, največja dovoljena obremenitev: 16.050 kg, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, prva registracija: 11/2010, Leto izdelave: 2010, Oprema: ABS, Proizvajalec: HMK Bilcon Model: 22.000 l ADR cisterna, 4 prekati Leto izdelave: 2010 Stanje: Zelo dobro Serijska številka: UH9TP2BXXA1HB1615 Ref. št.: 7987 Datum registracije: Bsdoxwr Npopfx Agtelg Kolutne zavore: ? ABS: ? Preme: BPW Dimenzija pnevmatik: 425/65R22,5 Ostanek profila: 80 - 60% Vzmetenje: ? Orodjarna: ? Skupna masa: 20.000 kg Lastna masa: 3.950 kg Nosilnost: 16.050 kg Kapaciteta rezervoarja: 21.900 l Število prekatov: 4 (

Stanje: rabljeno, Ta oglas je za BioQuell L-4 OPTI Enota je v popolnem delovnem stanju in je pripravljena za takojšnjo uporabo Bjdpfxsxzgr Hj Agtolg BioQuell L-4 OPTI je vsestranski, mobilni generator vodikovega peroksida (HPV) v pari, ki se uporablja za biološko dekontaminacijo različnih prostorov in opreme, vključno z izolatorji, digestorji, liofilizatorji in celo celotnimi prostori. Gre za del Bioquell tehnologije podjetja Ecolab, ki je znana po učinkovitem odstranjevanju mikrobne obremenitve. Oznaka „OPTI“ se najverjetneje nanaša na optične senzorje sistema, ki so lahko v pomoč pri nadzoru postopka ali potrditvi njegove učinkovitosti.

Stanje: rabljeno, Leto izdelave: 1999, barvni kanali: 8, Ponujamo rabljen offset tiskarski stroj Heidelberg Speedmaster 74 8 Color Plus Coater 4/4, letnik 1999. Bsdpfxoynvurj Agtolg Proizvajalec: Heidelberg Model: Speedmaster 74 8 Color Plus Coater Obratno tiskanje 4/4 ali naravnost Leto izdelave: 1999 Konzola CPC 1.0.4 Hladilna enota Technotrans Stanje: rabljeno ID kategorije: 839 ID tipa: 520 Tip: offset tiskarski stroj V primeru vprašanj ali če potrebujete več informacij, nam pošljite sporočilo ali nas pokličite.

Stanje: rabljeno, - Polavtomatski delilniki testa za okrogle ali kvadratne kose od 1.490 € - Polavtomatski delilnik testa s kvadratno posodo, 20 delov; cena: 1.490 € - Polavtomatski delilnik testa za okrogle kose, 20 delov, blagovna znamka: Lambert; cena: 1.990 € - Polavtomatski delilnik testa za okrogle kose, 20 delov; cena: 1.990 € - Polavtomatski delilnik testa, 24 delov, blagovna znamka: Bertrand Puma; cena: 2.490 € - Polavtomatski delilnik testa za okrogle kose, 24 delov, blagovna znamka: Bertrand Puma; cena: 2.490 € - Polavtomatski delilnik testa za okrogle kose, 20 delov, blagovna znamka: JAC; cena: 2.490 € - Polavtomatski kvadratni delilnik testa, 20 delov, blagovna znamka: PANIRECORD; cena: 2.490 € - Polavtomatski delilnik testa za okrogle kose, 20 delov, blagovna znamka: JAC; cena: 2.500 € Bsdpfx Ajxvyymsgtolg - Polavtomatski delilnik testa z okroglo posodo, 20 delov, blagovna znamka: PANIRECORD; cena: 2.500 € - Polavtomatski hidravlični kvadratni delilnik testa JAC DIV 20, rabljen, blagovna znamka: JAC; cena: 2.600 € - Delilnik testa, 20 delov, kvadratni DIVITRAD, blagovna znamka: Bertrand Puma; cena: 3.900 €

Stanje: zelo dobro (rabljeno), Beading Machine / Sheet Metal Edge Forming Machine by renowned German manufacturer Weberwerke Siegen. The machine is designed for edging, hemming, and beading (creating ribs) on sheet metal edges. Its robust and heavy cast iron construction ensures stable and precise operation. The open C-frame allows for processing large sheets and long components. The electric drive with a large flywheel guarantees smooth operation and sufficient torque for forming sheet metal. The pressure and roller guidance are mechanically adjustable. Blodpfx Agsyga T Njteg Nameplate data: • Model: BM 4 • Year of manufacture: 1952 • Working width: up to 1250 mm • Sheet thickness: up to approx. 4–5 mm (depending on material) • Material strength: Gb = 45 kg/mm² This machine is not a shear – it does not cut sheet metal; it is exclusively for shaping it. Used condition, complete, with visible signs of use consistent with its age. Ideal for locksmith shops, tool rooms, maintenance departments, as well as restoration work and one-off or small-batch production.

Stanje: zelo dobro (rabljeno), Na prodaju profesionalne vatrogasne pumpe PFJ (PFJ Pumpen und Feuerlöschtechnik GmbH, Njemačka) model TS 8/8 DIN 14410. ⚙️ Tehničke specifikacije: Model: TS 8/8 DIN 14410 Bledpfx Agsyyxiwsteg Kapacitet: 800 l/min Radni tlak: 8 bar Nazivna brzina vrtnje: cca 2725 o/min Godina proizvodnje: 2 komada – 1993, 32 radna sata, 98 radnih sati 1 komad – 1997, 164 radna sata Težina: cca 162 kg Proizvođač: PFJ GmbH Jöhstadt – Proizvedeno u Njemačkoj 🔧 Tehničko stanje: Pumpe su ispravne, pale se i rade ispravno Uobičajeni tragovi korištenja (ogrebotine, oštećenja – vidljivo na fotografijama) Oprema rabljena, ali u dobrom tehničkom stanju Kompletne kao na fotografijama 📦 U setu: Motorna pumpa Upravljačka ploča Rasvjeta Elementi vidljivi na fotografijama 💡 Primjena: Vatrogasci / DVD Izvlačenje vode Industrijski i građevinski radovi Protupožarni sustavi ℹ️ Dodatne informacije: Cijena se odnosi na 1 komad Moguća kupnja kompleta Moguća dostava

Stanje: zelo dobro (rabljeno), A robust industrial machine of German manufacture: Walther Trowal, model DLT 4, year 1980. The device is designed for surface finishing of metal, aluminum, or plastic components, using the vibratory finishing process (deburring, edge rounding, polishing, cleaning). Classic rotary drum construction – reliable, heavy-duty, and durable, typical of "West Germany" manufacturing. Technical specifications: • Model: DLT 4 • Manufacturer: Carl Kurt Walther GmbH & Co. KG, Wuppertal-Vohwinkel (West Germany) • Year of manufacture: 1980 • Drive type: ZOD71N 10 • Motor power: 0.38 kW • Power supply: 380 V / 50 Hz • Rotational speed: 31 / 61 rpm • Range: 3.5 – 7 rpm • Drum diameter: Ø 70 cm • Working length: approx. 80 cm • Net weight: 825 kg Bodsxmlinjpfx Agtjlg Condition description: • Machine is complete, drum rotates freely and smoothly. • Perforation and interior are in good condition. • No signs of cracks or structural damage. • Electrical connection and possible inspection required. • Ideal for a tool shop, metal finishing plant, or production line. Applications: • Deburring and cleaning of components after machining. • Polishing of metal or aluminum parts. • Finishing of bolts, bushings, stamped components, castings, and precision parts. Condition: used, robust, classic Walther Trowal design – suitable for light refurbishment or ready for immediate use.

Stanje: rabljeno, Leto izdelave: 2006, Tehnički detalji: Bljdpfx Agjwmcx Aotsg Prečnik obrade: 490 mm Dužina obrade: 2000 mm Ukupna potreba za snagom: 15/20 kW Težina mašine cca: 3,6 t Potrebni prostor cca: 2,8 x 1,85 x 1,9 m Stanje kao novo · Ciklična kontrola Heidenhain · Kruti ležaj od visokokvalitetnog livenog materijala sa kaljenim, fino brušenim vođicama i optičkim merilom na X-osi · Sigurnosna spojka na Z- i X-osi · Zaptiven vazduh sa filterom od uglja u direktnom sistemu za merenje položaja · Visoka preciznost i krutost glavnog vretena zahvaljujući preciznom ležaju, otvor vretena Ø 93 mm standard, opcija do Ø 130 mm · Masivan konjić, pinola Ø 90 mm sa unutrašnjim konusom MK5 · Veliko izvlačenje iznad sanki za laku dostupnost prilikom obrade osovina. Dužina obratka 2 m bez konjića, 1,70 m sa konjićem. Strug Seiger ima Teach-in CNC programe. Upravljanje je MC420. Držač alata: SAUTER.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, številka stroja/vozila: NR: 220.10.029.19, Funkcionalnost: popolnoma funkcionalen, moč: 15 kW (20,39 KM), vhodna napetost: 400 V, vhodni tok: 28 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, višina obdelovanca (maks.): 60 mm, Oprema: CE označba, dokumentacija / priročnik, Naprodaj visokokakovostni robni lepilni stroj Format4 Tempora 60.06 EL – takoj pripravljen za delo! Dvignite svojo proizvodnjo na višjo raven s tem malo rabljenim robnim lepilnim strojem Format4 Tempora 60.06 EL v odličnem stanju. Stroj je zasnovan za industrijsko uporabo in zagotavlja izjemno natančnost ter popolno površino vsake plošče. - Visokonatančno avtomatsko lepljenje robov Bsdjy Dg N Topfx Agtelg - Enota za predrezkanje za popolno pripravo roba - Zanesljiv in konstanten sistem lepljenja - Popolna obdelava: porezovanje, rezkanje, poliranje - Enostavno upravljanje in zanesljivo delovanje Vključene dodatne opreme: - Rdeč zračni rezervoar (kot je prikazano na fotografijah) - Dodatni ogrevani posoda za lepilo – idealna za hitro menjavo različnih barv lepila Stroj je skrbno vzdrževan, zelo malo rabljen in popolnoma operativen – pripravljen za neposredno uporabo v proizvodnji. Stroj je na voljo zaradi reorganizacije obrata. Za več podrobnosti ali ogled nas kontaktirajte.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, leto zadnje generalne obnove: 2026, vrsta vhodnega toka: trifazni, skupna masa: 350 kg, vhodna napetost: 400 V, skupna dolžina: 500 mm, skupna širina: 520 mm, skupna višina: 1.200 mm, vhodna frekvenca: 50 Hz, Certificirano po DGUV do: 05/2027, Stroj za deljenje in oblikovanje testa Stiskalnica za žemljice Record Polavtomatski, 36-delni Delilna glava NOVO obnovljena Novi noži iz nerjavečega jekla Vložek testa do 2100 g S 3 oblikovalnimi ploščami Priključek: 400V, 16A-CEE vtič Mere: 520 x 500 x 1200 mm (ŠxGxV) Rabljeni stroj, obnovljen Z jamstvom in servisom rezervnih delov Možnost: SAMO PRI NAS! Nova oblikovalna plošča Dostavna služba Bedpfxsuav Ite Agtslg Podest iz nerjavečega jekla Vzdrževalna pogodba Servisni paket E-Box Navodila in zagon Velika izbira stiskalnic za žemljice samo pri nas!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg Bedpfx Asd Tbbdogtolg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Blodpfxsfdkb Ts Agtog Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. Bodpfx Aod Tqaljgtolg When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg Bljdpfsfdkb Uex Agtog - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Bljdeguk A Hjpfx Agtsg Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. Bodpfefdkbhjx Agtolg When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard Bledjguk Dkspfx Agtog - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. Bjdpsguk Dvsfx Agtslg For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: zelo dobro (rabljeno), Edgebander FORMAT 4 Tempora 60.06 glueBox - used Touchscreen Swiveling control panel Program memory Automatic pressure bridge adjustment Feed via transport chain Extendable workpiece support Diamond jointers for both climb and counter-rotation Glue pot located at the bottom Quick-change glue pot system Suitable for PUR adhesives GLUEBOX system Bsdpfxju R S Nwj Agtslg Pressure unit with powered roller Cut-off saw with 2 high-frequency motors Cut-off saw, pneumatically tiltable Flush / radius milling unit Motorized positioning control for milling unit x-motion PLUS Corner rounding unit with diamond-coated cutters Radius scraper blade Radius scraper blade with motorized positioning Flat scraper blade Workpiece-activated flat scraper blade Infeed lock Spraying unit for release agent Spraying unit for lubricant Spraying unit for cleaning agent Year of manufacture: 2022 ----- Technical Specifications ----- Edging thickness, coil material: 0.4 - 3 mm Edging thickness, strip material: 3 - 6 mm Workpiece thickness: 8 - 60 mm Min. workpiece length: 140 mm Feed speed: 10 m/min Screen diagonal: 15 inches Jointers dimensions: D 80 x 64 mm Jointers power: 1.1 kW Cut-off saw power: 0.35 kW Milling station power: 0.75 kW Extraction port diameter: 80 + 160 mm Compressed air connection: 7 - 10 bar Total length: 4,872 mm Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm Weight: 1,500 kg Quality Info: - All settings checked - Adjusted to manufacturer specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Immediately ready for operation

Stanje: dober (rabljeno), 4-postajni knjižnovezni stiskalnik za lepljenje blokov MURO 4 x 5000 A4/HAD Trdna konstrukcija, vodoodporna plošča in pocinkane komponente. Stroj je v brezhibnem stanju. Bjdpoy Ehnaefx Agtolg Tehnične specifikacije: Format: 350x320x550 (Š/G/V) Število postaj: 4 Napajanje: 230V Maksimalna poraba moči: 4kW Teža: 102kg Visoka vpenjalna sila, vztrajnika z udobnim oprijemom. Električno sušenje z dvema stopnjama moči: 2 in 4kW Vsak stiskalnik je mogoče nagniti do 45′ Konstrukcija je na kolesih za lažje premikanje.

Stanje: dober (rabljeno), GUK FA 49/4 zgibalni stroj + GUK FA 49/4 prečni zgibalni modul Stroj je v zelo dobrem tehničnem in vizualnem stanju. Format: 490x690 mm. Hitrost zgibanja: 30–160 m/min Oprema: 4 vzporedne kasete na glavni enoti 4 pravokotne kasete na prečni zgibalni enoti Prva kaseta podaljšana. Prilagoditve kasete so na številčnici. Gladko nastavljiva hitrost. Števec z možnostjo porcij in prikazom hitrosti zgibanja. Rietschle kompresor. Orodni valj z veliko število pripomočkov za perforacijo, biganje in rezanje. Povišani pokrovi za zvočno izolacijo. Podajanje s pomočjo vakuuma. Bsdsy Ehk Iopfx Agtslg Mobilni izhod (prosto stoječa izhodna enota) z gladkim upravljanjem hitrosti. Popolna dokumentacija. Obsežen nabor dodatne opreme.

Stanje: rabljeno, Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Krmiljenje: Siemens 840 D Obratovalne ure: cca 27.000 Dolžina struženja: 2000 mm Premer struženja nad posteljo: 490 mm – nad prečnim suportom: 280 mm Presek orodja za struženje: 25 x 25 mm Premer vretena: 130 mm Maksimalni navor: 500 Nm Bedoy Ipvwjpfx Agtolg Konjiček: premer pinole: 70 mm Pomik pinole: 160 mm Hitri pomik X: 7 m/min Hitri pomik Z: 10 m/min Pogon: 15/20 kW Dodatna oprema: 1 x velika luneta, 1 x mala luneta, 1 x sledilna luneta, držalo PARAT

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1090, TB6/SB MOD 140, proizvajalca Giani F.lli L. & G. s.n.c. (Italija), je industrijski stroj za vzdolžno rezanje, zasnovan za razrez filmov, papirja in embalažnih materialov. Stroj odlikuje robustna konstrukcija in zanesljivo rezanje, zato je primeren za neprekinjeno industrijsko uporabo. Običajno se uporablja v predelovalni, embalažni in filmski industriji, kjer so zahtevani natančni rezi in stabilno ravnanje z materiali. ⚙️ TEHNIČNI PARAMETRI Bljdpfsyghn Ijx Agtjg • Proizvajalec: Giani F.lli L. & G. s.n.c. (Italija) • Tip stroja: vzdolžni rezalnik / stroj za vzdolžno rezanje • Model: TB6/SB MOD 140 • Serijska številka: 1090 • Leto izdelave: 2007 • Certifikat: skladno s CE • Uporaba: filmi, papir in embalažni materiali

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, skupna dolžina: 34.000 mm, obremenitev na par nosilcev (maks.): 3.000 kg, število vrst polic: 4, višina okvirja: 3.500 mm, prostor za palete: 108 evropske palete, širina okvirja: 1.100 mm, višina police: 3.500 mm, dolžina police: 8.500 mm, dolžina opore: 2.700 mm, 4 rows of pallet racking (4 x M35112711-2) - Each 8.5 m long, 3.5 m high, 1.1 m deep - Each with 3 bays, 2.7 m wide - Each with 2 beam levels, compartment load capacity 3,000 kg Included: - 16 frames (RM3511 - RAL5019) - 32 base plates, shims, fastening material Bedjv Ukz Aepfx Agtslg - 64 floor anchors (ZZBA1210) - 48 single beams (T27114 - RAL2008) - 4 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Freight / Delivery: - Max. 20 working days after receipt of payment - Delivery free to site / installation location - Unloading from the truck is the purchaser’s responsibility using their own forklift equipment - Deliveries are made throughout Germany (mainland only, excluding islands) - Deliveries to EU countries by individual arrangement

Stanje: novo, nosilnost na konzolno roko: 650 kg, višina police: 4.000 mm, skupna dolžina: 4.000 mm, skupna širina: 1.480 mm, nosilnost na stojalo: 1.950 kg, Data: Bodpfx Asy Ixgxegtelg - H: approx. 400 cm - D: approx. 148 cm - L: approx. 400 cm - Cantilever arms: approx. 120 cm including 8 cm deflector at the front - Axle spacing: 130 cm - NEW stock available for immediate delivery. - 650 kg load capacity per arm - 1950 kg load capacity per upright - Uprights painted in RAL7016 - Cantilever arms painted in RAL3000 - Arms are hooked in - Arms adjustable in 100 mm increments - Levels: base + 3 storage levels (4 storage levels total) The uprights included in this racking set are pre-prepared free of charge for potential conversion to double-sided use. Advantages of the hooked-in cantilever arm: see images. Racking consists of: - 04 x uprights incl. base, approx. 400 cm made from IPE180 - 12 x cantilever arms, approx. 120 cm, profile 10 cm x 4 cm - incl. all necessary connecting elements and bolts Price: €1,995.00 net €2,374.05 gross You will receive an invoice with VAT shown separately. Accessories such as floor anchors, collision protection, etc., can also be purchased from us. Transport: Delivery is available on request via our partner shipping company; costs depend on postal code. Assembly: Our trained staff are available to professionally assemble and dismantle your equipment if required. Our recommendation: Let us know what you need... We are happy to assist you with your projects, from planning and ordering to installation.