Scm Minimax Fs 41 Es nakup rabljenega (13.133)

Stanje: novo, Leto izdelave: 2022, obratovalne ure: 81 h, vrsta goriva: električni, Pogon: Kolesa Lastna teža: 5.150 kg Gsdpfxoyxkwke Afweit Dvižna zmogljivost: 363 kg Delovna višina: 1.430 cm Tip površine: Zahteven teren Za več informacij se obrnite na prodajo podjetja KEY-TEC.

Stanje: novo, Leto izdelave: 2022, obratovalne ure: 65 h, vrsta goriva: električni, Pogon: Kolesa Lastna teža: 5.150 kg Gedpfjyxkwdsx Afwjit Nosilnost dviga: 363 kg Delovna višina: 1.430 cm Transportne mere (D x Š x V): 0,00384x0,00176x0,00197 Vrsta površine: grob teren Za dodatne informacije se obrnite na prodajo KEY-TEC.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: ES 412, Leto izdelave: 2019, obratovalne ure: 15 h, nosilnost: 1.400 kg, dvižna višina: 4.240 mm, prosto dvigovanje: 1.470 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 1.960 mm, dolžina vilic: 1.150 mm, lastna masa: 874 kg, skupna dolžina: 1.870 mm, vrsta pogona: Elektro, gradbena širina: 800 mm, Visokodvižni viličar Številka šasije: ES 412 Težišče tovora: 600 Širina vilic: 560 mm Gsdpfxexf N Tus Afwoit Tip droga: Triplex Stanje: kot novo Tehnično stanje: novo Tip sprednjih gum: poliuretan Stanje sprednjih gum: 80 - 100% Tip zadnjih gum: poliuretan Stanje zadnjih gum: 80 - 100% Napetost baterije: 24V Kapaciteta baterije: 250Ah Tip baterije: PzS Leto izdelave baterije: 2024 Stanje baterije: 80 - 100% Popoln prosti dvig,

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: ES 412, Leto izdelave: 2024, obratovalne ure: 5 h, nosilnost: 1.200 kg, dvižna višina: 4.240 mm, prosto dvigovanje: 1.470 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 1.960 mm, dolžina vilic: 1.150 mm, lastna masa: 874 kg, skupna dolžina: 1.870 mm, vrsta pogona: Elektro, gradbena širina: 800 mm, High-lift stacker Chassis number: ES 412 Load centre: 600 mm Giedpjwanucsfx Afwot Fork width: 560 mm Mast type: Triplex Condition: New machine Technical condition: New Front tyres type: Polyurethane Front tyres condition: 80 - 100% Rear tyres type: Polyurethane Rear tyres condition: 80 - 100% Battery voltage: 24V Battery capacity: 250Ah Battery type: PzS Battery year: 2024 Battery condition: 80 - 100% Full free lift,

Stanje: rabljeno, Skobeljni in debelinski stroj Nikmann FS 41N - širina skobljanja 41 cm - vreteno s 4 noži Gsdeya Drvopfx Afwoit - 2 mizna valja - motor z zavoro Stroj v zelo dobrem, odličnem stanju.

Stanje: novo, moč: 368 kW (500,34 KM), konfiguracija osi: 6x2, barva: modra, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, vzmetenje: zrak, Oprema: ABS, EBS (Elektronski zavorni sistem), klimatska naprava, For inquiries regarding the vehicle, Mr. Seidel will be happy to assist you (contactable at Tel. ...). Godpeyhyh Hofx Afwsit Iveco AS260S50Y/FS CM 6x2 BDF Swap Body Chassis Axle configuration: 6x2P, 3 axles, trailing axle, cab version AS MY, emission standard Europe, engine: Cursor 13, 500 HP, Euro VIe, transmission: 12-speed HiTroniX automated, permissible gross weight: 26 tons, drive axle variant SR single reduction, single axle, full air suspension, disc brakes, steered trailing axle, single tires, vehicle type: container chassis CM, vehicle set-up ON, wheelbase 4,800 mm, model year 2024, engine speed 1,650 RPM, emission standard EURO VI E, tire size 315/70R22.5, speed limiter 90 km/h, electrically operated lifting roof, transparent for high roof (MLL), standard black front grille, manually operated cab tilting mechanism, mirror cam covers for AS, FHS in body color, front underrun protection for chassis with total weight over 7,490 kg, plastic bumper, high roof AS cab, electronic immobilizer and 2nd vehicle key, dashboard design: plastic with black trims, COC EU vehicle type approval, digital tachograph version 4.1, air compressor 2-cyl. 630 cc with integrated clutch, demand-controlled, smart generator 2,880 W (24V x 120A), demand-controlled, SR-SOLO LIGHT 17x, rear shock absorbers, weight variants: front axle 8,000 kg, rear axle 11,500 kg (up to 12,000 kg technically possible), trailing axle 7,500 kg (up to 8,000 kg technically possible), standard train brake, front axle stabilizer, standard applications, front axle stabilizer, exhaust end pipe to the left, air filter unit under cab, lift mechanism for trailing axle or leading axle (TX/P), driving height with two settings, omission of rear underrun protection, trailer version for operation with continuous brake system, end crossmember, D-value: 130 kN, trailer socket for 24V operation, 15-pin, rear axle ratio: i = 2.31, connectivity box 4G incl. TCO service contract, engine idle shutdown, tire pressure monitoring system (TPMS) with internal sensors, VDI interface for telematics services version 4.0, infotainment: 10" TFT display, transmission software with ECO-Roll (coasting function), GPS cruise control Hi-Cruise, driver fatigue warning system (Driver Drowsiness Attention Warning), warning triangle according to ECE-27 specification, hill-start assist (Hill Holder) for comfortable starting on slopes, electronic stability program (ESP), reversing monitoring system with camera, blind spot monitoring system (BSIS) right side, intelligent speed assistant (ISA), forward detection system (MOIS), emergency braking assistant (AEBS), preparation for alcohol interlock device (ALC) with wiring, NOISE ECE 51/03, standard EU vehicle width, ECAS air suspension with 2 sensors, Speedline aluminum wheels, SLT, painting of plastic cab parts in cab color, luggage compartment left and right, transparent sun visor mounted on the outside of the cab roof, auxiliary diesel/water heater 4kW, fully automatic climate control including stationary air conditioning, standard refrigerator and storage box, leather steering wheel, curtains for bed, air horn mounted behind bumper (air operated), foldable table on passenger side, lower bed single-piece, firmness level: firm, upper bed with one-piece mattress, ashtray in center console, electrical provision for tail lift operation, ...

Stanje: rabljeno, prevoženi kilometri: 772.000 km, moč: 260 kW (353,50 KM), prva registracija: 12/2010, vrsta goriva: dizel, število sedežev: 41, vrsta prenosa: samodejen, emisijski razred: Euro 5, barva: bela, zavore: retarder, Leto izdelave: 2010, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, parkirni grelec, Rabljeno vozilo Sedeži: 41, stojišča: 44, prostor za otroški voziček/invalidski voziček: 1 Prikaz prioritete znotraj in zunaj Stanje notranjosti/sedežev: zelo dobro ohranjeno - Odobritev razreda O2 - Avtomatski menjalnik - Dvigalno-spuščalna naprava - Klimatska naprava - Radio - CD predvajalnik - Vrata I dvojna širina - Vrata II dvojna širina - Prostor za otroški voziček/invalidski voziček - Prikaz ciljne postaje spredaj, ob strani, zadaj - Signalizacija za potnike - Sedeži Transit - Sedežne prevleke visoke trdnosti - Mikrofon Gedpfx Afow Nz Uyewoit - Retarder - Dodatno ogrevanje - Ventilacijski kanal brez šob - Zaščitno steklo proti okužbam za voznikovo mesto

Stanje: novo, Leto izdelave: 2026, For sawing, milling, surface and thickness planing, and optionally mortising, in the smallest of spaces High-precision sliding table made of anodized aluminum, various lengths available Large outrigger (1200 x 650 mm) with material roller and extendable aluminum telescopic fence up to max. 3200 mm with professional flip stops Max. saw blade diameter 315 mm, tiltable from 90° to -45° Large spindle moulder swivel range from 90° to -45° to the rear Four spindle speeds up to 10,000 rpm, manually adjustable With spindle moulder reverse operation Strongly ribbed surface planing tables made of stress-relieved cast iron for decades of stability and flatness Two-speed feed for thickness planing Three independent industrial motors for continuous operation With lockable main switch and motor protection switch Fixed handwheels Dimensions and weights Weight (net) approx. 857 kg Surface planer Surface table width: 410 mm Surface table length: 2000 mm Max. planing depth, surface: 5 mm Extraction connection Extraction port diameter: 3 x 120 mm Saw blade guard extraction port diameter: 60 mm Installation information Space requirement length: 5960 mm Space requirement width/depth: 5140 mm Space requirement explanation: Dimensions consider maximum travel or working length. Working area length: 1600 mm Working area width/depth: 1600 mm Working area explanation: Please add specified dimensions to the space requirement to obtain the recommended installation area for the machine. Thickness planer Thickness table length: 757 mm Thickness table width: 423 mm Working thickness min.: 3 mm Working thickness max.: 230 mm Max. planing depth, thickness: 5 mm Electrical data Connection voltage: 400 V Line frequency: 50 Hz Gsdpfx Asih Dxlsfwjit Rated operation mode drive motor: S6 Duty cycle drive motor: 40% Power output drive motor: 3 x 5.0 kW Sliding table and worktable Sliding table length: 2660 mm Sliding table width: 360 mm Sliding table height: 142 mm Worktable length: 1250 mm Worktable width: 430 mm Worktable height: 900 mm Spindle moulder Spindle tilt: 0 to -45° Spindle shaft diameter: 30 mm Usable spindle length: 125 mm Spindle speeds: 3500/6000/8000/10000 rpm Max. milling tool diameter: Max. tool diameter, retractable: 210 mm Max. tool diameter, retractable at 45°: 150 mm Max. tool diameter, tenoning: 275 mm Cutterhead Cutterhead type: TERSA Cutterhead diameter: 87 mm Number of knives: 4 Cutterhead speed: 5200 rpm Panel saw unit Rip length: 2600 mm Cutting width with parallel fence: 900 mm Max. crosscut width left of blade: 3260 mm Saw blade tilt: 90–45° Max. cutting height at 90°: 90 mm Max. cutting height at 45°: 63 mm Max. saw blade projection 90°: 100 mm Max. saw blade projection 45°: 71 mm (Main) saw blade diameter: 315 mm (Main) saw blade diameter explanation: with scoring blade (Main) saw blade speed: 4000 rpm Feed Feed speed: 6–12 m/min Location: ex stock 54634 Bitburg - immediately available -

Stanje: rabljeno, Stereomikroskop, povečevalni projektor, mikroskop, projektor MOTIC tip SL-41 Series Letnik izdelave cca 1995 Gjdpjxtq Aasfx Afwoit Povečevalni objektiv W10X/20 Omrežni priklop 230 V, 50 Hz - Namizno stojalo z napajalnikom za epi-osvetlitev - Višinsko nastavljiva objektivna glava - Okroglo kolonsko stojalo z velikim prevesom, nagibno roko - Vir svetlobe za epi-osvetlitev 12 V, 10 W Potrebni prostor (D x Š x V) 500 x 140 x 350 mm Teža cca 10 kg V dobrem stanju

Stanje: novo, Siemens 6SL3120-1TE15-0AD0 Enomotorni modul 5A SN: T-R16252841 FS: B, nerabljen, v zapečateni originalni embalaži, 100% delujoč, obseg dobave po fotografijah Giodpex Dxgzofx Afwot

Stanje: pripravljen za uporabo (rabljen), VEM IE3-W41R 100L4 HR H motor SN ES 16088080052007, rabljen, dobro ohranjen, 100% delujoč, obseg dobave v skladu s fotografijami. Gisdpfx Aox Dwhqjfwet

Stanje: novo, Leto izdelave: 2024, prostornina tovornega prostora: 41 m³, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 2.500 mm, Usable material: manure Gjdjwdy Hxspfx Afwjit

Stanje: potreben popravila (rabljeno), Leto izdelave: 2014, številka stroja/vozila: AA2/002546, število mest v zalogovniku orodij: 24, skupna masa: 6.600 kg, dolžina mize: 5.200 mm, širina mize: 1.300 mm, TEHNIČNI PODATKI Dolžina mize: 5.200 mm Širina mize: 1.300 mm Število rezkalnih vreten: 1 Tip rezkalne mize: nosilna miza Pozicije menjalca orodij: 24 PODROBNOSTI O STROJU Napetost: 400 V Poraba toka: 64 A Mere & teža Dimenzije (D x Š x V): 10.300 x 2.450 x 2.800 mm Lastna teža: 6.600 kg Transportni paketi: 1 OPREMA Vrtalno orodje Vakuumska črpalka Orodja Vakuumska črpalka Becker Vtlf 250: - Leto izdelave: 2008 - Glavna moč motorja: 5,5 kW - Priključni premer: 70 mm - Brezoljna: Da Gijdpfoy Nybtex Afwst Opomba: Stroj je potreben popravila. Obstaja težava s CAN-bus sistemom.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, številka stroja/vozila: AHH/157/00, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 12.500 mm, skupna širina: 2.400 mm, skupna masa: 4.000 kg, Oprema: CE označba, TEHNIČNI PODATKI Stroj ima naslednjo konfiguracijo: 1. Tip enote: predrezkalni agregat 2. Tip enote: lepilni agregat 3. Tip enote: pritisni valjčki 4. Tip enote: kapi agregat 5. Tip enote: grobi rezkalni agregat 6. Tip enote: agregat za zaoblovanje robov 7. Tip enote: radialni potegni agregat 8. Tip enote: ravni potegni agregat 9. Tip enote: krtačni agregat PODROBNOSTI STROJA Napetost: 400 V Poraba toka: 36 A Varovalka: 63 A Moč: 14,4 kW Dimenzije in teža Dimenzije (D x Š x V): 12.500 x 2.400 x 1.900 mm Teža: 4.000 kg OPREMA Orodja Gedpfey Nxrdjx Afwoit CE označba

Stanje: novo, Equipment: Height adjustment of the brush units via handwheel with numeric display Brush diameter 200 mm Machine in standard design, CE compliant Technical data: Working width: 600 mm Max. working height: 300 mm Extraction nozzle diameter: 2 x 140 mm Carpet feed motor power: 0.37 kW Feed speed variable: 3 - 20 m/min Brush unit motor power: 4.0 kW each (optionally 5.5 kW) Machine weight: approx. 750 kg Further technical data: see brochure attached Including ACCESSORIES: - Steel brush, brass-coated, Ø 200 mm - TYNEX brush, Ø 200 mm Giodpsdd Hi Ejfx Afwjt Note regarding used machines: • Errors in technical data and prior sale reserved. • Stated prices are ex works – free loading! • The machines have been cleaned and functionally tested. • All machines are sold as inspected with no warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: novo, Clean air extraction / dust extractor Dust tested to H3 standard, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum output in this class Very quiet operation Designed for commercial use Sturdy and compact housing made of galvanized sheet steel Extraction port easily convertible from left to right, offering flexible use Large maintenance openings Large, mobile chip containers with clamping bracket and chip collection bag Dust extractor is delivered fully assembled, ready for immediate use All models are mobile Filter material made from polyester fleece, aluminum-coated for long service life Filters are antistatic as standard, certified and approved according to Category M-BIA The fan is installed downstream of the filter Extraction motor energy efficiency class: IE3 Gjdpfx Afsr A Eq Rswsit Nominal airflow: 1,448 m³/h Nominal negative pressure: 2,242 Pa Drive motor power: 2.2 kW, 400 V, 50 Hz Chip collection volume: 2 x 165 l Outer diameter of extraction inlet: 160 mm Filter surface area: 9.21 m² Residual dust content: < 0.1 mg/m³ Maximum sound pressure level: 73 dB(A) Dimensions (L x W x H): approx. 1,618 x 830 x 1,653 mm Weight: approx. 268 kg PM VERSION Automatic filter cleaning with pneumatic system, operating a wiper frame

Stanje: novo, Leto izdelave: 2023, Robust steel grey cast iron construction Milling spindle can be tilted backwards from 0° to -45° Forward and reverse rotation of the milling spindle Large-sized milling unit made of grey cast iron, mounted directly to the table Solid and precise cast iron table Standard swing-type milling guard Aluminium sliding table with ball contact system Torsion-resistant, highly precise, smooth-running, and reliable in daily operation 10-year SCM warranty against wear on the guideways Milling spindle supported at the top with precision ball bearings for minimal bearing load and maximum service life Precise milling fence with rapid adjustment and fine adjustment with scale at the fence jaw Integrated extraction port Large milling table opening enables use of larger tooling Weight approx. 290 kg Extraction connection diameter 2 x 120 mm Work table L x W = 1000 x 435 mm Gijdpjiknp Rofx Afwot Table height 900 mm Sliding table length 1000 mm Sliding table width 270 mm Drive motor power 5.0 kW, 400 V, 50 Hz Milling spindle tilt 0° to -45° Usable spindle length 100 mm Maximum table overhang 130 mm Spindle speeds 3500/7000/10000 rpm Spindle diameter 30 mm Maximum retractable tool diameter 180 mm

Stanje: novo, Working width (finished size): 23–180 mm Working height (finished size): 6–105 mm Minimum workpiece length: 300 mm Feed speed: 6–12 m/min Motor power, horizontal spindles: 2 x 7.5 kW Motor power, vertical spindles: 1 x 7.5 kW Spindle speed: 6,000 rpm Spindle diameter: 35 mm Clamping length, vertical spindles: 120 mm Clamping length, horizontal spindles: 190 mm Manual lubricant pump Gjdpfx Afeiiv Dcjwsit Profile capacity without axial adjustment on vertical spindle: 10 mm Loose roller integrated in outfeed table Extraction connection diameter: 4 x 120 mm Including OPTIONS: - Motor-driven feed roller in front of the planer with lever for quick adjustment - Front vertical pressure unit in front of the left vertical spindle - Infeed table length: 2,300 mm - Tool package consisting of 4 planer heads and one jointer rebate cutter

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, Automatic moulder with 9 spindles and SCM Control 100 PC control for all spindles Max. working width: 240 mm Min. working width: 25 mm Godjg Umrmjpfx Afwjit Max. working height: 120 mm Min. working height: 10 mm Minimum workpiece length: 640 mm Feed speed: 6 - 36 m/min, variable Spindle speed: 6000/8300 rpm Spindle diameter: 40 mm Usable length of vertical spindles: 140 mm Usable length of horizontal spindles: 250 mm Axial adjustment of vertical spindles relative to worktable: 0 - 80 mm Axial adjustment of horizontal spindles relative to right guide: 0 - 45 mm Min. and max. profile tool diameter: 100 - 220 mm Min. and max. cutterhead diameter: 120 - 140 mm Profiling capacity of 2nd lower horizontal spindle with 200 mm tool diameter: 15 mm Feed motor power: 5.5 kW Diameter of feed rollers: 140 mm Infeed table length: 2500 mm Quick adjustment of infeed table and guide: 10 mm Extraction capacity: 7500 m³/h Compressed air supply: 6 - 10 bar Weight: 6000 kg Dimensions (L x W x H): 6300 x 1620 x 1655 mm Spindle configuration: Lower horizontal spindle Motor power: 11.0 kW Spindle speed: 6000 rpm Right vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm Left vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm 2nd right vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm 2nd left vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm Upper horizontal spindle Motor power: 11.0 kW Spindle speed: 8300 rpm 2nd lower horizontal spindle Motor power: 12.0 kW Spindle speed: 8300 rpm 2nd upper horizontal spindle Motor power: 11.0 kW Spindle speed: 8300 rpm 3rd lower horizontal spindle Motor power: 7.5 kW Spindle speed: 8300 rpm SET - UP quick adjustment system Work tables with fine adjustment of all units via Control 100 PC system Axial adjustment range of vertical spindles: 80 mm large tool diameters Pneumatically operated full safety enclosure Feed system with full cardan drive Infinitely variable feed speed Electric height adjustment of the feed system and spindles with independent control Segmented pressure shoes after upper horizontal spindles Fine adjustment of outfeed table Pneumatic device for spindle locking in working position Automatically adjustable left vertical spindle Including ZIWO CL 15 feeder unit Note for used machines: • Specifications are subject to errors and prior sale. • Listed prices are ex works – free loading! • The machines have been cleaned and function tested. • All machines are sold as seen, with no guarantee or warranty whatsoever. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries with your address and telephone number!)

Stanje: zelo dobro (rabljeno), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration roller, steel 2nd Unit: Combination unit (roller 60 Sh, sanding pad with 2 inserts (hard, soft)) Gisdsxqggcopfx Afwst Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotoric table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front & rear Sanding pad inserts fitted with new graphite cloth Includes nearly new abrasive belts Includes all documentation Note for used machinery: • Errors in technical specifications and intermediate sale reserved. • Listed prices are ex-works and free loading! • The machinery has been cleaned and function-tested. • All machines are sold as seen, with no warranty or guarantee whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only possible in written form. (We only respond to inquiries that include your full address and telephone number!)

Stanje: zelo dobro (rabljeno), Wide Belt Sander for Calibration and Fine Sanding Working width: 1100 mm Min/max workpiece height: 3 - 120 mm Feed motor power: 0.8 kW Abrasive belt speed: 18 m/sec Abrasive belt dimensions: 1115 x 2620 mm Feed speed: 4.5 / 9 m/min Extraction port: 3 x 160 mm Compressed air connection: 6 bar 1st Unit: Sanding roller Rubber-coated 90 Sh Motor power: 11 kW 2nd Unit: Combination unit Rubber-coated sanding roller 60 Sh Rigid sanding pad Motor power: 11 kW 3rd Unit: Cleaning brush Automatic workpiece thickness adjustment at infeed with digital thickness display Table extension at outfeed Dimensions (approx.) L x W x H: 2291 x 1784 x 2350 mm Weight (approx.): 3000 kg Note for used machines: • Subject to technical changes and prior sale. • Prices quoted are ex-location and free loaded. • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty claims. Gjdpfx Afjtwzyfewjit Buyers are welcome to inspect the machine at its location. • Special agreements are only valid if made in writing. (We only respond to inquiries that include your address and phone number!)

Stanje: novo, Wide belt sander for calibration and fine sanding Working width: 1,100 mm Min./Max. working height: 4 / 170 mm Abrasive belt width: 1,115 mm Abrasive belt length: 2,150 mm Gear motor: 2.2 kW Feed speed: variable m/min Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning blower 1st unit Oscillating belt cleaning blower 2nd unit Oscillating belt cleaning blower 3rd unit 10” touchscreen operating panel “eye-S” 1st unit: steel roller 2nd unit: rubber-coated calibrating roller 85SH 3rd unit: combination unit with pneumatic segmented sanding pad/rubber sanding roller 35 SH Motor power 1st unit: 18.5 kW Motor power 2nd & 3rd unit: 18.5 kW Version "B" for RRCS with: pneumatic switching on/off 1st unit pneumatic switching on/off 2nd unit pneumatic switching on/off 3rd unit “MESAR” elastic segmented sanding pad pneumatic switching on/off of the sanding pad unit electronic adjustment of working height SPECIAL PRICE! Gedpfx Asitvkuefwjit AVAILABLE IMMEDIATELY!

Stanje: novo, Technical data: Working width mm: 1,350 Min./max. working height mm: 4 - 170 Abrasive belt width/length mm: 1,370 / 2,620 Main motor power kW: 18.5 with inverter Feed speed variable m/min: 3.5 - 18 Working units: 1st unit: "RA" helical grooved contact roller, Sh 86, diameter 160 mm 2nd unit: Combi: Rubber-coated sanding roller diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad “MESAR” with 24 segments Version C: - Elastic electronic segmented sanding pad “MESAR” complete with: - Pneumatic cylinder (On/Off) for automatic engagement/disengagement of the sanding roller-sanding pad unit - Activation of segments via electronic control, which synchronizes their engagement with feed speed and adjusts the number based on workpiece geometry, enabling selection of more or fewer segments to the left and right of the workpiece. Versions 135: “MESAR 24” with 24 segments, segment width 55 mm, complete with B/24 workpiece sensing strip at the infeed Gsdpohtuvrefx Afwsit Additional equipment: Roller table at infeed and outfeed for long workpieces Perforated table and conveyor belt Vacuum table with 4 kW (5.5 HP) electric fan integrated into the machine frame Oscillating blow-off unit 2nd unit Touch screen 10.4” display with ‘eye S software integration’ PLEASE NOTE: IMAGES ARE SAMPLE PHOTOS OF A SIMILAR SD70!

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Cutting length: 3,200 mm Cutting width: 3,200 mm Cutting height: 65 mm Saw blade diameter max.: 300 mm Main saw motor: 5.5 kW Scoring saw blade diameter max.: 160 mm Scoring unit motor power: 1.5 kW Air cushion tables: 3 pcs. (1 x 2500 x 500 & 2 x 1500 x 500 mm) Office version for panel optimization Clamping grippers: 8 pcs. Saw carriage height adjustment on THK guides Pressure beam with slots (through-feed) Side alignment device Pneumatic quick-change saw blade system Extraction connection diameter: 1 x 120 mm & 1 x 150 mm Installation dimensions (L x W): 5700 x 6000 mm Weight: approx. 2,500 kg INVERTER NEW Note on used machines: • Technical data may be subject to errors and prior sale. • All prices are ex-works, free loaded onto truck! • The machines have been cleaned and tested for functionality. • All machines are sold as viewed, with no warranty or guarantee. The buyer has the opportunity to inspect the machines at the location. • Special agreements are only valid in written form. Giedpehvan Iofx Afwst (We only respond to inquiries that include your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, 3-axis controlled panel saw with parallelogram support table Swiveling control panel above the table Data input via membrane keypad Electronic adjustment of the scorer unit Automatic rip fence with adjustment via lead screw and linear ball bearing guide Parallelogram support table for miter cuts Manual adjustment with angle settings from +50° to -50° perpendicular to the cutting axis, with fine adjustment. Angle detection system via magnetic strip and LCD display. Crosscut fence with 3 LCD displays Extendable support table with roller support Technical data: Cutting length mm: 3200 Main saw blade diameter mm: 450 Scorer blade diameter mm: 120 Panel cuts with extendable stop mm: 3200x3200 Saw blade tilt range degrees: 0° / +46° Max. saw blade cutting height at 90° mm: 150 Max. saw blade cutting height at +45° mm: 130 Saw blade speed rpm: 2500, 3500, 5000 Scorer speed rpm: 9000 Extraction port diameter mm: 120 & 100 Main motor power Hz 50 kW: 7.5 Scorer unit power Hz 50 kW: 0.75 Cutting width with rip fence mm: 1270 Weight approx. 1180 kg Gisdpoyftzkefx Afwet Used machinery notice: • Technical data subject to errors and prior sale. • Prices quoted are ex-location, free loading! • The machine has been cleaned and function-tested. • All machines are purchased as inspected, with no warranty claims whatsoever. Buyers are invited to inspect the machine at its location. • Special agreements are only valid in written form. (We only respond to inquiries that include your address & telephone number!)