Mikroskop, stereomikroskop, profilni projektor, merilni projektor, merilni mikroskop

MOTIC SL-41 Series

Leto izdelave: 2000, stanje: rabljeno, x-travel 1000 mm y-travel 1600 mm z-travel 800 mm Control system: WENZEL WPC 2040/FW31.351 Total power requirement: kW Machine weight approx. 5500 kg Required space approx. m WENZEL CNC-controlled vertical 3-D coordinate measuring machine Model: LH 108 CNC Year of manufacture: 2000 (continuously serviced and calibrated by manufacturer) Y-axis as longitudinally movable measuring portal: 1,600 mm X-axis as transverse measuring head carriage: 1,000 mm Z-axis as vertical measuring spindle: approx. 800 mm Max. workpiece weight / table load: approx. 2,250 kg Clearance under measuring portal: approx. 900/1000 mm Overall table size: approx. 2,600 x 1,250 mm Table height above floor: approx. 700 mm Table plate thickness: 380 mm Machine height: approx. 3,100 mm Weight: approx. 5,500 kg Special Equipment / Accessories: • Measuring table, crossbeam, and spindle made of dark natural hard stone; table with 6 x 9 threaded holes for securing workpieces/fixtures • All axes are air-bearing, making them easy to operate, virtually wear-free, and equipped with incremental linear scales with a resolution of 0.0005 mm • WENZEL CNC control unit Type WPC 2040 / FW31.351 built into the workstation (Control system was replaced approx. 3 years ago) Hnjdpfx Ajt Hw Nyjbxen • WENZEL measuring software Type METROSOFT QUARTIS R 12 SP 1 with SurfPro package and QUARTIS Q-DAS • RENISHAW motorized rotary and swivel head (automatic indexing in 7.5° steps) with measuring probe Model PH 10 M Plus and measuring probe TP 20 plus various probe accessories • RENISHAW Probe Head Controller Type PHC 10 C-3 Plus, also integrated into the workstation • Automatic probe change possible, 6-position probe magazine Model MCR 20 mounted on the table • Mobile hand control panel with progressive control lever (joystick) for manual adjustment of all 3 axes with continuously adjustable travel speeds • Reference sphere for setup on the table, workstation, various clamping devices, etc. Condition: Very good – can be inspected under power in stock, ready for demonstration, was professionally disassembled by a measuring machine specialist at previous owner and reassembled at current location. Delivery: Ex stock – as is and as inspected Payment: Net – upon receipt of invoice.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 9.000 h, Funkcionalnost: popolnoma funkcionalen, TECHNICAL DETAILS Control system: Mitsubishi Meldas 700 Main Spindle Machining diameter: 20 mm Machining length without repositioning: 200 mm Spindle bore: 24 mm Spindle speed: 200 - 10,000 rpm Spindle indexing C-axis: 0.001° Motor power (built-in motor): 2.2 / 3.7 kW Sub Spindle Machining diameter: 20 mm Spindle speed: 200 - 8,000 rpm Spindle indexing C-axis: 0.001° Motor power: 0.75 / 1.5 kW Driven Tools on Vertical Holder Speed: 200 - 4,500 rpm Motor power (AC servo motor): 1.0 kW Number of tools: 6 Tooling System Turning tools (12x12x130): 5 Tool holder / Cut-off tool (16x12x130): 1 Drilling tools (front side): min. 3 Drilling tools (rear side): 5 Tool holders, tailstock (diameter): 19.05 mm Tool holders, turning tools (shank cross-section): 12 mm Collets and Guide Bush Main/sub spindle collet: F25 (145E) Guide bush (Neukomm): T223 (22.001) Rapid Traverse All axes: 32 m/min Machine Specifications Footprint (without magazine) L/W/H: 2,430 x 1,085 x 1,770 mm Spindle height: 1,050 mm Machine weight: 2,150 kg Input power: 8 kVA EQUIPMENT - 6 turning tools (12 mm shank cross-section) - 3 driven tools for cross machining - 3 driven tools for face machining on the main spindle - 3 driven tools for face machining on the sub spindle - Main spindle with C-axis - Sub spindle with C-axis - 3x driven tools for rear side machining - Yellow warning light - Interior lighting - Workpiece conveyor belt Hedpfxoxf Hqqj Abxenn - FMB Turbo 3-26 loading magazine - Option for long parts - Spindle flushing (Scherzinger pump)

Stanje: rabljeno, Leto izdelave: 2007, Stružni premer 600 mm Obhodni premer 680 mm Stružna višina 600 mm z-os 500 mm x-os 560 mm Moč glavnega vretena 65/80 kW Hitrost glavnega vretena: 2800 Izmenjevalnik obdelovancev 12 mest Pomik z-os 0,01–30.000 mm/min Pomik x-os 0,01–45.000 mm/min Vpenjalna glava Rota NCR 630 mm Napetost 400 V Frekvenca 50 Hz Krmiljenje Siemens 840 D pl Hnodsv Rrq Dspfx Abxsn Skupna potrebna moč 140 A Teža stroja ca. 18 t Potrebni prostor ca. 6,5 x 3,8 x 4,20 m Vključno s paleto z orodjem.

Leto izdelave: 1987, stanje: rabljeno, številka stroja/vozila: 7.0176, Note: We have 6 units of this machine in stock! Manufacturer: Gildemeister Type: GS 36 – 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11 t General / Technical Data: Portal 6-spindle automatic lathe Spindle pitch circle diameter: 300 mm Number of longitudinal slides: 6 Number of cross slides: 2 Max. cross slide travel: 60 mm Max. longitudinal slide travel: 125 mm Spindle speeds: Infinitely variable 562 – 3373 rpm Hnodjin Ub Topfx Abxjn Main time range: Infinitely variable 1.95 – 78 sec. Nonproductive time range: 0.79 – 2.13 sec. Drive power: DC motor spindles 20 kW; feed drives 8 kW Footprint: approx. 1720 x 4700 mm Note: The machine cannot be converted for bar work. Equipment: – 1 creep feed drive for setup operation – 1 automatic central lubrication system – 1 coolant system with pipes and pump – 1 facing slide, position 3 (without cams) – 1 facing slide, position 5 – 6 longitudinal slides (without drive, without cams) – Feed for independent longitudinal slide, flexible, positions 1-6 – Programmable logic controller IPC 620 – Noise protection measures 80 dB – Automatic feed re-engagement with electric interlock on side door – Hinged belt chip conveyor – Machine version with DC drives for speed and feed – KIENZLE terminal 2450-07 with signal interface and data transmission control Accessories: Electrical configuration: The electrical equipment consists of a DC main drive with 20 kW power output for spindle drive and an AC servo motor for feed drive with 8 kW power output (protection rating IP 54), as well as the corresponding switching and control devices and necessary installation. Total connected load for the machine: 32 kW/h.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1972, Funkcionalnost: popolnoma funkcionalen, Tlačna sila: maks. 1.250 t Prosta odprtina: 585 mm Vgradna višina: maks. 480 mm Hod: maks. 355 mm Teža: 9.000 kg Hnsdjwuutbopfx Abxen Opomba: Stiskalnica je bila leta 2002 delno obnovljena s strani SACK & KIESSELBACH in je prejela nov krmilni sistem.

Leto izdelave: 1990, stanje: rabljeno, x-travel 850 mm y-travel 1200 mm z-travel 600 mm Total power requirement: kW Machine weight approx.: t Space requirement approx.: m Refurbished: 2000 X-axis as longitudinally traversing portal: 850 mm Y-axis cross slide within portal: 1,200 mm Z-axis as measuring head quill (vertical) approx.: 600 mm Clearance between portal sides approx.: 1,000/1,080 mm Vertical clearance approx.: 750 mm Hnodet Hwqkspfx Abxjn Total table size approx.: 1,000 x 2,100 mm Table height above floor approx.: 850 mm Overall machine height approx.: 3,050 mm Weight approx.: 3,800 kg Special equipment / Accessories: – Granite plate as measuring table and crossbeam, vibration-dampened – Measuring 3D probe head for accommodating 5 different probe inserts and for SCANNING operation for continuous data acquisition, resolution 0.1 µm – Path control for 3 axes simultaneously – HEWLETT-PACKARD computer system H 382 with colour monitor, disk drive, keyboard, optional printer – ZEISS software as follows: UMESS 300/MFT 300 with extension package, revision 1998, as well as 302 Form and Position Inspection, 303 Fitting Functions, 305 Automatic Operation, 307 Parameter Ctrl. Manager, and options Tools/KMG Disk Rev. 7xxx / SAM 300 / KMG Disk / Bore Pattern Program A 741 and Probe Check 99 – Mobile manual control panel with progressive control lever for continuously adjustable travel speed of the 3 axes – Probe magazine mounted on the machine, equipped with 3 probes, with probe change-over facility – Separate control and switch cabinet Type 608485, separate computer desk, separate cabinet – Operating manuals, various measuring probes, and table-mountable calibration ball/standard

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Baty SM300 Profile Projector – Compact and Precise Optical Inspection Hjdpjuyh N Sofx Abxjnn The Baty SM300 profile projector is a versatile and precise projector, specifically developed for demanding quality control in workshop or production environments. With a vertical light path and a 300 mm screen, it is ideal for inspecting small and medium-sized components. The SM300 offers high resolution of 0.5 microns and a measuring range of 150 mm x 50 mm, allowing for detailed and accurate measurement of parts. The device is available with various magnification lenses, including 10x, 20x, 50x, and 100x, to meet your specific inspection requirements. The GMR display, which provides complete geometric measurement capabilities, is available as a display option for this profile projector. These features make the SM300 an ideal choice for use in quality control, where precision and efficiency are critical. Features: - 300 mm screen with finely ground glass for clear projections. - Rugged design suitable for use in harsh environments. - Magnification options: 10x, 20x, 50x, 100x. - Measuring range of 150 mm x 50 mm with a resolution of 0.5 microns. - Integrated profile and surface illumination for sharp and precise images. - Digital angle measurement and comprehensive geometric measurement functions with the GMR display system. The SM300 is particularly suitable for workshops where reliable and precise inspection is required. Its robust construction ensures a long service life and consistently high measurement accuracy, even under challenging conditions.

Leto izdelave: 1984, stanje: rabljeno, Printing machine, embossing machine, stamping machine - Non-functional, control unit: defective Hnodpfxod Hp Tzs Abxsn - Pneumatic-hydraulic press - Stroke: 50 mm - Clear distance between columns: 850 mm - Table size: 400 x 370 mm - Dimensions: 1285/590/H1820 mm - Weight: 416 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, For sale is a complete turning line for drive shafts, including an end machining unit (cutting to length & drilling). The line consists of the following machines: - Lang-Laru: for cutting to length and drilling Hnsdpfx Abeupgbwexen - 3x Emag VTC 250: for turning the drive shafts All machines are interconnected via an Ewab conveyor system. Each turning machine is loaded by a KUKA robot. Technical specifications for each machine can be found in the images provided.

Stanje: dober (rabljeno), Multi-spindle lathe (6 spindles) Hsdpfop Dux Tox Abxenn Max. bar diameter: 16 mm Guide tubes: 4,000 mm Chip conveyor