Schwarz Namizna Ekscentrična Stiskalnica Z Zaščitnim Ščitom nakup rabljenega (55.345)

Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Ekscentrična stiskalnica za obdelavo pločevine z orodji. Pgsdjytykzjpfx Altjp

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Znamka: HSM Tip: V-Press 1160 plus Leto izdelave: 2008 Tlačna sila: 532 kN Napetost: 400 V Maks. teža bale: do 550 kg (odvisno od materiala) Pgedpfx Aszh Eztoltop Dimenzije bale: 120 x 110 x 120 cm Teža stroja: 2403 kg Dimenzije stroja: 180 x 157 x 298,5 cm Velikost polnilne odprtine: 119,5 cm × 65 cm Stanje: zelo dobro! Video delujočega stroja je na voljo na zahtevo Možen je tudi prevoz

Stanje: rabljeno, Single-Column Hydraulic Press with Drawing Cushion RÖCHER Type REP 100.01 SZ Hydraulic Drawing Press Machine No. 15,499 Year of manufacture: 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Pgjdpfx Aoyupuljltjp Installation height: 600 mm Table surface: 850 x 700 mm with through-hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Drawing cushion force: 40 tons (400 kN) Drawing cushion stroke: 200 mm Drawing cushion surface: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Max. hydraulic operating pressure: 300 bar Hydraulic tank capacity: 700 liters Rapid approach speed: approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Electrical connection: 400 Volt, 50 Hz (63 Amps) - Operation and programming via control panel PC 670 touch panel, keyboard and mouse - Machine control via Siemens S7-300 PLC - Ram stroke and pressing force programmable via the control system - Drawing cushion with drawing and ejector function - Drawing cushion force infinitely adjustable - Ram and drawing cushion fitted with direct travel measurement systems - Drawing cushion can be moved in and out under the press area, for punching operations using the through-hole - Floor-level installation, drawing cushion does not extend into the floor - Pressure and travel shut-off - Fixed stop with indirect measuring system - Pressure holding time infinitely programmable - Table surface with holes for drawing cushion ram rods - Ram with ejector - Cutting stroke damping - Stroke release via two-hand operation, foot switch, hand lever, and push button on the control panel - LEUZE light barrier as reach-in protection in safety mode - Front mirror columns on the press table laterally adjustable - Electrical control cabinet mounted on the machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose lines for tool temperature control or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirement for the press (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Stanje: rabljeno, Hydraulic Notching Machine with Angle Adjustment SIMASV Type AV 220-6PA Serial No. C1524 Year of Manufacture: 1996 Blade Length: 220 mm Material Thickness (Steel): 6 mm Material Thickness (Stainless Steel): 4 mm Table Dimensions: 950 x 790 mm Table Height: 940 mm Motor Power: 3 kW Power Supply: 400 Volt, 50 Hz - Operation via pushbutton or foot switch - Adjustable notching angle from 30° to 140° - Angle adjustment by two hand cranks for right and left - Hydraulic clamping for the adjustable blades - Electric foot switch - 2 adjustable stop bars with degree graduation - Multiple mm measuring scales integrated in the table top - HSS blades newly ground, as new condition Required space (L x W x H): 1000 x 950 x 1470 mm Weight: 750 kg Very good condition Pjdpfx Aerzfh Holtjgp

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, moč: 4 kW (5,44 KM), stiskalna sila: 80 t, hod: 60 mm, Pritisna sila: 80 ton Površina mize: 680 x 540 mm Število hodov: 60/min. Hod: 60 mm Nastavitev bata: 20 - 80 mm Podpfszbvvvox Altegp Izrez: 275 mm Luknja v mizi: 150 mm Upravljanje: Dvoručno upravljanje Država porekla: Nizozemska Moč motorja: 4 kW Dimenzije stroja (D׊×V): 175 x 100 x 235 cm Teža stroja: 3700 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, številka stroja/vozila: TYPE 63 R4, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 100 h, moč: 5,5 kW (7,48 KM), vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, stiskalna sila: 63 t, skupna masa: 4.600 kg, Oprema: dokumentacija / priročnik, EKSCENTRIČNA PREŠA OMERA Model: 63 R4 Osnovni tehnički podaci Nominalna snaga: 630 kN Snaga motora: 5,5 kW Broj hodova u minuti: 45–104 Hod klizača: 9–120 mm Razmak između stola i klizača: 310 mm Dimenzije stola: 750 × 570 mm Dimenzije klizača: 500 × 350 mm Debljina stola: 65 mm Otvor u stolu: 165 mm Težina stroja (pribl.): 4.600 kg Dimenzije stroja (za transport): 2.806 × 1.244 × 1.492 mm Priključak: 380 V / 50 Hz / 3 faze Boja stroja: RAL 7035 (svijetlo siva) / pokretni dijelovi RAL 5017 (plava) Pgjdpfsyn Sdpjx Altep Oprema stroja Centralizirani sustav podmazivanja PLC: SCHNEIDER s upravljačkom pločom Frekvencijski pretvarač za regulaciju brzine rada preše Pneumatska spojka Balansirajući cilindri Hidraulički sustav zaštite od preopterećenja VPN priključak za udaljeni pristup Dodatna oprema Dodatna radna ploča 750 × 570 × 65 mm (1 kom) Gumeni amortizeri vibracija (1 set) Rasvjeta radne zone (1 set) Sustav za zaštitu alata i nadzor rada preše Podaci o stroju Serijski broj: CM18355 Godina proizvodnje: 2022 Radni sati: cca. 100 Stanje: Stroj korišten samo za prezentacije i ispitivanje alata Dokumentacija Potpuna dokumentacija na hrvatskom jeziku (tiskana i digitalna) Električne i hidrauličke sheme CE Izjava o sukladnosti Demontaža, priprema i utovar za transport: cca. 1.500 EUR

Stanje: novo, Condition: New Delivery time: approx. 14 - 16 weeks from order Country of origin: Turkey Price: €58,200 Leasing rate: €1,099.98 Pgedpfx Aewiq I Doltop Pressing force: 80 t Nominal pressing force at 4 mm Table length: 600 mm Table width: 900 mm Through-hole in table: 200 mm Stroke: 1 - 110 mm Strokes per minute: 60 Ram guides: 6 Ram adjustment: 80 mm Ram bore: 50 mm Throat depth: 300 mm Installation height: 400 mm Motor: 7.5 kW Length: 1600 mm Width: 1500 mm Height: 2750 mm Weight: 5,700 kg Welded steel frame construction 6-way ram guide Pneumatic clutch-brake combination Safety enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Motorized ram adjustment Variable stroke rate via frequency inverter Operating modes: * Setup mode * Two-hand activation * Foot pedal activation * 2-cycle operation via light barriers * Continuous operation Touchscreen for: * Stroke counter with preselection for continuous operation * Stroke rate adjustment * Lubrication intervals and duration * Alarm messages * Motor rotation direction * Monitoring of inputs and outputs 2 free cams for connecting peripheral devices Automatic central lubrication Equipment in accordance with CE regulations (Sample images) OPTIONS: Vibration pads: €192.00 T-slot plate: on request Hydraulic overload protection: on request etc.

Stanje: dober (rabljeno), Leto izdelave: 2012, Baujahr ist 1979, die Maschine wurde aber 2012 komplett generalüberholt auf neuste UVV Einbauhöhe: 800 mm Stößelhub: 500 mm Ausladung: 360 mm Nennkraft: 400 kN Hydraulikdruck: 160 bar Betriebsstunden: 1356 Sonstiges: neue Steuerung von Pilz, Elektroschaltpläne vorhanden Video über Funktionalität vorhanden Auf Wunsch kann Transport und Verladen gegen Aufpreis Europaweit organisiert werden. Preise zzgl Mehrwertsteuer Besichtigung nach Terminvereinbarung möglich. Kontaktieren Sie uns, unser Team freut sich Ihnen weiterhelfen zu dürfen. Maschinen An- / Verkauf Pgodpfx Aloy H Iddotep KAUF / VERKAUF VON PRODUKTIONS- & METALLBEARBEITUNGSMASCHINEN WERKZEUGMASCHINEN UVM. Sie benötigen eine hochwertige, aber preiswerte Maschine für Ihre Fertigung? Oder wollen Sie Ihre verkaufen? Für weitere Infos- oder Kontaktmöglichkeiten erreichen Sie uns über das Kontaktformular.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, tested machine: Power: 75 tons Strokes per minute: 90 spm Throat depth: 300 mm Ram stroke: 16 - 140 mm Ram adjustment: 80 mm with protective guard Pjdpfx Alsy St Ncotegp newly safety-inspected (UVV-tested) .

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 45.000 h, stiskalna sila: 80 t, hod: 30 mm, širina mize: 780 mm, dolžina mize: 880 mm, širina plošče bata: 650 mm, dolžina plošče bata: 800 mm, Oprema: CE označba, dokumentacija / priročnik, stiskalnica Balconi 80t udarcev 100-400 Pedpfx Aljy Ulbvjtjgp nastavljiv hod 30 mm razdalja 350 mm teža stroja 15.000 kg po želji tudi z izolirano kabino in dovodno linijo s SARONNI škarjami 800 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 10 t, hod: 65 mm, širina mize: 450 mm, dolžina mize: 320 mm, širina plošče bata: 280 mm, dolžina plošče bata: 180 mm, skupna dolžina: 1.145 mm, skupna širina: 970 mm, skupna višina: 1.930 mm, skupna masa: 1.250 kg, Oprema: dokumentacija / priročnik, Ekscentrična preša LEN 10C. Leto izdelave: 1987 (SMERAL TRNAVA Češka). - pritisk: 10 ton, - število hodov drsnika pri neprekinjenem delovanju: 80 ali 160/min, - število posameznih hodov: 45/min in 60/min. - nastavljiv hod drsnika: 6-65 mm, - obseg nastavitve med mizo in drsnikom: 45 mm, - izteg: 160 mm, - razdalja med mizo in drsnikom: 225 mm, - delovna površina mize: 450 x 320 mm, - delovna površina drsnika: 280 x 180 mm, - dimenzije (dolžina x širina x višina): 1145 x 970 x 1930 mm, - pnevmatska sklopka (min. pritisk stisnjenega zraka: 0,4 MPa), - moč motorja: 1,1/1,5 kW, - masa preše: 1250 kg. Pgodpfxey Ry Tfo Altep

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 160 t, hod: 150 mm, skupna masa: 19.000 kg, Oprema: CE označba, Enotočkovna kolenska hidravlična stiskalnica z dodatno opremo. Odvijalnik, ravnalo, podajalnik in varnostne ograje. Proizvajalec HANIL KNUCKLE PRESS CO LTD, Južna Koreja - 2018. Tip HKCA-160. Tlačna sila 1600 kN. Največja točka pritiska (R.T.P.) 4,0 mm pred spodnjo mrtvo točko. Gib bata 180 mm. Delovna hitrost 80 gibov/minuto. Največja višina matrice 450 mm. Nastavljivost bata 100 mm. Delovna miza 1300 x 700 mm x 140 mm debeline. Delovni bat 900 x 600 mm. Zračni tlak 5 barov. Dimenzije (Š x D x V) 2100 x 1800 x 3450 mm. Teža 19 ton. Glavni motor 15 kW. Pedpoy Twgzofx Altegp

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, moč: 8,75 kW (11,90 KM), stiskalna sila: 25 t, hod: 500 mm, obratovalna hitrost: 100 mm/s, hitrost vzvratne vožnje: 450 mm/s, širina mize: 630 mm, dolžina mize: 500 mm, širina plošče bata: 450 mm, dolžina plošče bata: 360 mm, razmak između stupova: 800 mm, skupna dolžina: 16.500 mm, skupna širina: 10.500 mm, skupna višina: 27.500 mm, skupna masa: 2.200 kg, hod blazine orodja: 160 mm, Hidravlična stiskalnica PYE 25 S1M z izmetalnikom. Leto proizvodnje 1987. Proizvajalec VEB Wema Zeulenroda (Nemčija). Pgsdstzwxdepfx Altep Parametri: Maksimalna stiskalna sila 25 ton. Delovni tlak 16 MPa. Zgornja miza 450 x 360 mm. Spodnja miza 630 x 500 mm. Prehod 800 mm. Hod bata 500 mm. Hitrost navzdol 100 mm/s. Hitrost navzgor 450 mm/s. Sila spodnjega izmetalnika 10 ton. Hod spodnjega izmetalnika 160 mm. Poraba moči 8,75 kW. Teža 2200 kg. Višina 2750 mm, dolžina 1650 mm, širina 1050 mm. Tehnično stanje stroja zelo dobro. Stroj po generalnem pregledu. Možen ogled in testiranje stroja v obratovanju.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, hod: 500 mm, obratovalna hitrost: 200 mm/s, hitrost vzvratne vožnje: 200 mm/s, širina mize: 750 mm, dolžina mize: 560 mm, širina plošče bata: 530 mm, dolžina plošče bata: 400 mm, skupna dolžina: 1.900 mm, skupna širina: 1.200 mm, skupna višina: 3.200 mm, skupna masa: 5.040 kg, Oprema: dokumentacija / priročnik, Hidravlična stiskalnica PYE 100 S1M z izmetalcem.\nProizvajalec: Werkzeugmachinen GmbH Zeulenroda (Nemčija), leto 1990.\nParametri:\nMaksimalna stiskalna sila: 100 ton.\nDelovni tlak: 16 MPa.\nMaksimalna izmetalna sila: 40 ton.\nHod batnice izmetalca: 200 mm.\nZgornja miza: 530x400 mm.\nSpodnja miza: 750x560 mm.\nSvetla odprtina: 800 mm.\nHod cilindra: 500 mm.\nHitrost navzdol: 200 mm/s.\nHitrost navzgor: 200 mm/s.\nPotreba po moči: 17 kW.\nTeža: 5040 kg.\nVišina: 3200 mm, Dolžina: 1900 mm, Širina: 1200 mm. Pgsdpfx Aljygtzyjtjp

Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 40 t, hod: 500 mm, obratovalna hitrost: 100 mm/s, hitrost vzvratne vožnje: 450 mm/s, širina mize: 630 mm, dolžina mize: 500 mm, širina plošče bata: 450 mm, dolžina plošče bata: 380 mm, kapaciteta rezervoarja za olje: 300 l, skupna dolžina: 1.150 mm, skupna širina: 1.750 mm, skupna višina: 3.050 mm, skupna masa: 3.200 kg, razdalja med stojali: 800 mm, Oprema: dokumentacija / priročnik, Hydraulic press PYE 40 S1/M with ejector. Year of manufacture: 1986. Manufacturer: VEB Wema Zeulenroda (Germany). Machine after complete overhaul. Piston seal replaced. Specifications: - Maximum pressing force: 40 tons - Operating pressure: 16 MPa - Upper table: 380 x 450 mm - Lower table: 500 x 630 mm - Daylight opening: 800 mm - Cylinder stroke: 500 mm Pgjdpfxswbt Uqs Altsp - Downward speed: 100 mm/sec - Upward speed: 450 mm/sec - Ejector stroke: 200 mm - Ejector force: 16 tons - Power requirement: 13 kW - Weight: 3180 kg - Height: 3050 mm, Length: 1750 mm, Width: 1150 mm Technical condition of the machine is very good. The machine has undergone a complete overhaul. Inspection and functional testing of the machine are possible by appointment.

Stanje: novo, Condition: new Delivery time: approx. 8 weeks from order Country of origin: Turkey Price: €111,800 Leasing rate: €2,113.02 Press force: 125 t Nominal press force at 5.5 mm Table length: 1,100 mm Table width: 630 mm Die opening in table: 180 mm Stroke: 15 - 150 mm Strokes per minute: 42 - 65 Ram size: 700 x 400 mm Ram guides: 8 Ram adjustment: 90 mm Throat depth: 320 mm Clear column spacing: 610 mm Motor: 15 kW Length: 1,400 mm Width: 2,200 mm Height: 3,120 mm Weight: 12,500 kg Pgedpfx Aljyq Svqstep Touch screen operation Semi-automatic stroke changeover Motorized ram adjustment with mechanical display and decimal resolution Variable speed motor Hydraulic overload protection Automatic cam switch control at top dead center Double T-slot table Oil circulation lubrication Dynamic braking Keyence light curtain Automation and monitoring of press parameters with PLC; alarm visualization on operator touch screen. Standard monitored parameters: - Control and visualization of press speed - Adjustable piece counter and total stroke counter - Motorized ram adjustment - Stroke setting automatic or manual - Tool monitoring - Alarm visualization - Hydraulic safety

Stanje: novo, Condition: New Delivery time: approx. 8 weeks from order Country of origin: Italy Price: €143,100 Leasing rate: €2,704.59 Pressing force: 160 t Nominal pressing force at 6 mm Table length: 1,200 mm Table width: 650 mm Die opening in table: 200 mm Stroke: 16–160 mm Strokes per minute: 35–55 Ram size: 740 x 420 mm Number of ram guides: 8 Ram adjustment: 100 mm Throat depth: 330 mm Clear gap between uprights: 690 mm Motor power: 15 kW Length: 1,410 mm Width: 2,220 mm Height: 3,544 mm Weight: 16,000 kg Touch screen operation Semi-automatic stroke change Motorized ram adjustment with mechanical display and decimal resolution Variable speed motor Hydraulic overload protection Automatic cam switching at top dead center Double clamping plate Oil circulation lubrication Pgodpfx Aleyq Suyjtsp Dynamic braking Keyence light barrier Automation and control of press parameters via PLC, with alarm visualization on OP touch screen. Monitored standard parameters: - Control and visualization of press speed - Adjustable piece counter and total stroke counter - Motorized ram adjustment - Automatic and manual stroke adjustment - Tool monitoring - Alarm visualization - Hydraulic safety

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Italy Price: €101,500 Leasing rate: €1,918.35 Press force: 100 t Nominal press force at 5 mm Pgodpfx Ajyq Sutoltsp Table length: 1,000 mm Table width: 630 mm Through-hole in table: 180 mm Stroke: 15 – 140 mm Strokes per minute: 45 – 70 Slide guides: 8 Ram adjustment: 90 mm Throat depth: 320 mm Clearance between uprights: 570 mm Motor: 11 kW Length: 1,320 mm Width: 2,200 mm Height: 3,080 mm Weight: 10,000 kg 8-fold slide guidance Fixed table Semi-automatic stroke adjustment Motorized ram adjustment Motor with variable speed Hydraulic overload protection Dynamic braking Clamping plate Automatic recirculating lubrication Keyence light curtains Operating manual in GERMAN or ENGLISH Automation and control of press parameters via PLC with alarm visualization on OP touch screen. Monitored standard parameters: - Regulation and visualization of press speed - Adjustable piece counter and total stroke counter - Motorized ram adjustment - Stroke adjustment automatic and manual - Tool monitoring - Alarm visualization - Hydraulic safety

Stanje: novo, Condition: New Delivery time: approx. 8 weeks from order Country of origin: Italy Price: €173,600 Leasing rate: €3,281.04 Press force: 200 tons Nominal press force at 7 mm Table length: 1,350 mm Table width: 800 mm Through-hole in table: 250 mm Stroke: 18 - 180 mm Strokes per minute: 35 - 50 Ram size: 900 x 570 mm Ram guides: 8 Ram adjustment: 110 mm Throat depth: 410 mm Pgsdpfx Aeyq Squsltop Clearance between uprights: 820 mm Motor: 22 kW Length: 1,500 mm Width: 2,633 mm Height: 3,950 mm Weight: 20,000 kg Touch screen operation Semi-automatic stroke change Motorized ram adjustment with mechanical display and decimal resolution Variable-speed drive motor Hydraulic overload protection Automatic cam switch control at top dead center Double clamping plate Oil circulation lubrication Dynamic braking Keyence light curtain Automation and press parameter control via PLC with alarm visualization on OP touch screen. Monitored standard parameters: - Regulation and visualization of press speed - Adjustable piece counter and total stroke counter - Motorized ram adjustment - Automatic and manual stroke adjustment - Tool monitoring - Alarm visualization - Hydraulic safety PRICE FCA ITALY

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Italy Price: €66,700 Leasing rate: €1,260.63 Press force: 50 t Nominal press force at 3.5 mm Table length: 800 mm Table width: 450 mm Stroke: 22 - 110 mm Strokes per minute: 60 - 100 Pedpfx Aloyq Sqnotegp Ram diameter: 70 mm Ram guides: 8 Ram adjustment: 70 mm Throat depth: 235 mm Installation height: 290 mm Motor: 5.5 kW Length: 1,330 mm Width: 1,000 mm Height: 2,650 mm Weight: 4,500 kg Touch screen control Semi-automatic stroke change Motorised ram adjustment with mechanical display and decimal resolution Motor with variable speed Hydraulic overload protection Double clamping plate Oil circulation lubrication Dynamic braking Keyence light curtain Automation and control of press parameters via PLC with alarm visualisation on OP touch screen. Monitored standard parameters include: - Control and visualisation of press speed - Adjustable piece counter and total stroke counter - Motorised ram adjustment - Stroke adjustment automatic and manual - Tool monitoring - Hydraulic safety

Stanje: novo, Condition: New Delivery time: approx. 14 - 16 weeks from order Country of origin: Italy Price: €199,300 Leasing rate: €3,766.77 Press force: 250 t Nominal press force at 8 mm Table length: 1,400 mm Table width: 800 mm Through-hole in table: 250 mm Stroke: 23 - 220 mm Strokes per minute: 25 - 50 Ram: 950 x 620 mm Ram guides: 8 Ram adjustment: 120 mm Throat depth: 410 mm Clear column width: 820 mm Motor: 33 kW Length: 1,600 mm Width: 2,900 mm Height: 4,250 mm Weight: 25,000 kg Touch screen operation Semi-automatic stroke change Motorised ram adjustment with mechanical display and decimal resolution Motor with variable speed Hydraulic overload protection Automatic cam control at top dead centre Double clamping plate Oil circulation lubrication Dynamic braking Keyence light curtain Automation and press parameter control with PLC and alarm visualization on operator touch screen. Monitored standard parameters: - Regulation and visualization of press speed - Adjustable piece counter and total stroke counter Pjdpfx Aljyq Spdetjgp - Motorised ram adjustment - Automatic and manual stroke adjustment - Tool monitoring - Visualization of alarms - Hydraulic safety PRICE FCA ITALY

Stanje: rabljeno, Leto izdelave: 1998, Beutler P96-C630 - Ekscentrična stiskalnica - mobilna nadzorna plošča - brezstopenjsko nastavljiv pogon - kombinacija sklopke in zavore - zaščita proti preobremenitvi v batnici - svetlobna pregrada - labodja vratna svetilka - leto izdelave: 1998 Tehnični podatki - Tlak: 630 kN - Hod: 12 - 120 mm - Število hodov: 30 - 130 /min - Najv. zaustavitveni čas: 96 ms - Izpad: 300 mm - Razdalja miza/batnica: 495 mm - Prehod med stenama ohišja: 270 mm - Površina batnice: 450 x 360 mm - Nastavitev batnice: 120 mm - Površina mize: 800 x 560 mm - Odprtina v mizi: Ø 100 mm - Delovna višina: 880 mm - Min. varnostna razdalja: 192 mm - Pogonska moč: 5,5 kW Pgodpfx Aeyna N Tsltep - Obratovalna napetost: 3x 400 V / 50 Hz - Dimenzije stroja (ŠxVxG): 1800 x 2600 x 1600 mm - Dimenzije elektro omare (ŠxVxG): 800 x 1700 x 450 mm - Teža: pribl. 5500 kg

Stanje: novo, Condition: new Delivery time: approx. 14 - 16 weeks from order Country of origin: Turkey Price: €48,500 Leasing rate: €926.35 Press force: 60 tons Nominal press force at 3.5 mm Table length: 500 mm Table width: 700 mm Through-hole in table: 190 mm Stroke: 1 - 100 mm Strokes per minute: 65 Ram guides: 4 Ram adjustment: 70 mm Ram bore: 45 mm Throat depth: 260 mm Installation height: 340 mm Motor: 5.5 kW Length: 1250 mm Width: 1350 mm Height: 2400 mm Weight: 3500 kg Welded steel frame construction 4-fold ram guidance Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Manual ram adjustment Operating modes: Pgjdpfx Ajwwwtijltop * Setup mode * Two-hand release * Foot release * 2-cycle operation via light barriers * Continuous operation automatic central lubrication Equipment according to CE regulations OPTIONS: Vibration pads Clamping plate

Stanje: novo, Leto izdelave: 2026, Condition: New Year of manufacture: 2026 Stock number: 070125 Delivery time: prompt, subject to prior sale Country of origin: Turkey Price: €40,200 Leasing rate: €767.82 In stock: 1 unit Press force: 40 tons Nominal press force at 2.5 mm Table length: 450 mm Table width: 650 mm Table through-hole: 150 mm Stroke: 1 – 80 mm Strokes per minute: 125 Slide guides: 4 Ram adjustment: 75 mm Ram bore: 40 mm Throat depth: 225 mm Installation height: 300 mm Table height: 835 mm Motor: 4 kW Length: 1350 mm Width: 1370 mm Height: 2330 mm Weight: 2100 kg Welded steel frame construction 4-way ram guiding Pneumatic clutch-brake combination Safety enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Manual ram adjustment Variable stroke rate via frequency inverter Operating modes: Pgjdpfx Alowiqvzstop * Setup mode * Two-hand operation * Foot pedal operation * Two-cycle operation via light barriers * Continuous run Touchscreen for: * Stroke counter with preset for continuous run * Stroke adjustment * Lubrication intervals and duration * Alarm messages * Motor rotation direction * Monitoring of inputs and outputs 2 free cams for connection of peripherals automatic central lubrication Equipment according to CE regulations OPTION: Vibration pads €192 Clamping plate €830

Stanje: novo, Stanje: novo Dobavni rok: približno 3-6 tednov po naročilu Država izvora: Turčija Cena: 130.600 € Leasing obrok: 2.468,34 € Pritisna sila: 200 t Dolžina mize: 1.200 mm Širina mize: 740 mm Prehodna odprtina v mizi: 220 mm Hod: 24 - 140 mm Število hodov: 50 1/min Tlačilo: 950 x 600 mm Nastavitev tlačila: 100 mm Globina: 390 mm Motor: 15 kW Dolžina: 2.350 mm Širina: 1.700 mm Višina: 3.435 mm Teža: 14.900 kg 8-točkovno vodilo tlačila Sprednje varovalo z varnostno svetlobno zaveso Motorizirana nastavitev tlačila Hidravlična zaščita pred preobremenitvijo Pgedpsynnb Djfx Altsp Avtomatsko mazanje Oprema v skladu s CE direktivami Navodila za uporabo v NEMŠČINI in ANGLEŠČINI