Samco Stiskanje Nosilcev - Stroj Za Izsekovanje Nosilcev nakup rabljenega (86.531)

Stanje: rabljeno, Bending tool, die, upper blade, upper tool, straight tool, die tool, seam closing tool Rodpfx Aegxgm Hegtst - Tool: for swing bending machine RAS type 74.30 - Dimensions: see drawing in photos - Slot spacing on rail: center to center 650 mm - Dimensions: 3060/28/H121 mm - Weight: 65 kg

Stanje: dober (rabljeno), Bending tool, die, upper blade, upper tool, upper clamping beam - Press brake tool: from Lotze HDZ folding machine - Length: 2678 mm - Hole spacing: 100 mm / M10 Rsdeip Eq Dspfx Agtot - Dimensions: see drawing in the photos - Size: 2678/6/H45 mm - Total weight: 5.6 kg

Stanje: rabljeno, Bending tool, die, upper blade, upper tool, straight tool, upper beam -Press brake tool: for folding (swivel bending) machine -Tool angle: 45° -Dimensions: see drawing in the photos -Size: 47 x 11 mm Rodpolcfiiofx Agtst -Length: 945 mm -Weight: 3.5 kg

Stanje: dober (rabljeno), Leto izdelave: 2006, številka stroja/vozila: 80706, Offre 25496 Machine d’usinage hydraulique universelle à deux stations – Cisaille d’angle + Unité de poinçonnage Caractéristiques techniques : Station 1 – Unité de cisaillement d’angle - Longueur de coupe jusqu’à : 220 mm - Épaisseur de coupe – Acier (résistance 400 N/mm²) : 6 mm - Angle de coupe réglable en continu au volant : 30° – 140° - Serrage pneumatique - Butées de positionnement gauche et droite - Surface de la table : 1020 x 940 mm - Avec rainures en T et butées de profondeur - Hauteur de la table env. : 920 mm Station 2 – Pliage ou poinçonnage - Force de pression max. : 200 kN - Vitesse de travail : 0 à 10 mm/sec - Capacité de pliage jusqu’à : 800 mm - Capacité de poinçonnage : jusqu’à 50 mm dans tôle de 3 mm - Butées de profondeur Rsdsx I Nbgspfx Agtjt - Entraînement : 400 V / 4 kW - Pédale électrique - Encombrement env. : L 1000 x H 1350 x P 1110 mm - Poids env. : 1100 kg

Leto izdelave: 2024, stanje: novo, Punching force 30 tons or 60 tons Table area 1000x600 mm or 1600x800 mm The electro-hydraulic elevating table punching machine with retractable bridge, type USC, is a machine developed from practical experience over many years. It stands out due to its utmost operational safety and optimal visibility of the punching table when the punching bridge is retracted. In the standard configuration, the punching cycle is initiated via the non-contact safety light curtain or using either of the two hand-operated coarse pushbuttons on the left and right sides of the machine. The stroke and passage of the machine can be continuously adjusted within the mentioned limits via an electronic position measuring system/potentiometer. Rsdpfonfu Nwjx Agtst Off-center loading of the machine is possible thanks to the extremely robust central guide column and the arrangement of the two hydraulic punching cylinders. The modular electro-hydraulic power unit is completely housed at the rear of the machine and is easily accessible for maintenance purposes. An automatic central lubrication system supplies all lubrication points in the stand with the required amount of lubricant. The electrical switching devices are housed in a separate control cabinet, which is permanently mounted to the machine. Machine settings are made via a user-friendly interface on the side-mounted touch panel. A freely programmable control system reliably and quickly processes all operations.

Stanje: zelo dobro (rabljeno), Here we offer you a TOX insertion press, model TOX-C C-frame press. TOX Pressotechnik Insertion Press TOX-C C-Frame Press Pneumo-hydraulic manual workstation with process monitoring for pressing in functional elements. Technical Data: - Press type: EMB 030.068.A.001 - Drive: KWE3O.0O.17O.10H - Pneumatic connection: G3/4'' - Compressed air treatment: filtered and dried compressed air, max. particle size 40 µm - Air pressure during operation: Pmin. = 3.0 bar, Pmax. = 6.0 bar - Pressing force: 170 kN - Total stroke / power stroke: 170 mm / 10 mm - Control: STE 326-366-3/4"-90-230V/AC, special version, complete - Electrical connection: 90-230V/AC - Ambient temperature operation: Tmin. = 10°C, Tmax. = 60°C - TOX press monitoring: EPW 500FP force / displacement measurement - Spring-return device: ZHE for TOX press - Insertion clearances: width 1917.5 mm, height 2506 mm, depth 1917.5 mm - Safety fence system: Leuze B20/B21 light curtain - Press-in tool: see images 15 to 18 - Press-in bushing (picture 17): 24.5 mm diameter Rjdpfshhil Tex Agtjt - Scope of application: insertion - Weight: 2200 kg - Model: EMB 030.068.A.001 - Condition: used - Scope of delivery: (see pictures) (Specifications and information subject to change and error!) If you have any further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Trumpf We are offering a laser and punching machine. Technical specifications: Power supply: 400V/50 Hz Protection: 3 x 100 A Connected load: 65 kVA Working area X x Y without repositioning Combined operation: 2585 x 1280 mm Punching operation: 2585 x 1370 mm Laser operation: 2585 x 1280 mm Performance: Laser: 2000 W Maximum sheet thickness: 8 mm Maximum punching force (incl. 20 kN active stripper): 220 kN Active stripper (programmable in steps): 4.5-20 kN Redpsm Ak Hujfx Agtst Maximum workpiece weight: 200 kg Maximum pass-through height: In punching mode: 35 mm In laser mode: 22 mm Speeds: X-axis: 90 m/min Y-axis: 60 m/min Simultaneous strokes: Punching: 900 /min Marking: 2800 /min C-axis: Punching: 60 rpm Thread forming: 330 rpm Tools Tool stations in linear magazine: 19 (with 2 clamps) Number of tools with multitool use: 19 to 190 tools All tools can rotate 360° continuously Tool change time: 1.5-5 s Maximum punching diameter: Single stroke: 76.2 mm at all tool stations Standard multi-cut: 200 mm Maximum bending height: 25 mm Maximum part size: 500 x 500 mm Accuracy: Position deviation: ± 0.1 mm Mean position scatter: ± 0.03 mm TRUMPF CNC control: Base: Siemens SINUMERIK 840D Type: TC 6000 L 1300 Loading and dismantling must be carried out by the buyer! Condition: used Scope of delivery: (See picture) (Specifications, technical data, and information subject to change and error!) We are happy to answer further questions by phone.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Drilling and insertion machine for all types of furniture fittings; row drilling and group drilling machine in the 32 mm system. Power supply: 400V, 0.75kW Spindle speed: 2800 rpm Stop rule: 960 mm 2x swiveling stops For drills with 10 mm shank diameter Maximum workpiece thickness: 40 mm Includes: 1x 7-spindle drilling head for row drilling with 32 mm pitch, equipped with integrated positioning pins Manual feed Base frame included Available at extra cost: Rjdpfx Agjumw Sbjtet Olive (handle) drilling head: €450.00 Mepla drilling head with press-in die: €550.00 Hettich drilling head with press-in die: €550.00

Stanje: dober (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, Revizija 1989 Tlačna sila: 2x200 kN, Število hodov: 40 - 300 hodov/min, Hod: 50 mm, Redjxx T Hfopfx Agtet Sklopka: pnevmatska, Napetost: 380 V, Teža stroja: 2.200 kg, dodatni izmetalec, tovarniško okrepljena izvedba

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Pozdravljeni, prodamo 2 IDC stroja znamke LUMBERG, model VARICON 7000. Rjdpfx Agoxt Rn Njtet Možnosti: - VARICON 7000-1: Rast 5, Rast 2,5 Plus, letnik izdelave 2010 – slike in video so priloženi v oglasu. (Oglas, cena in slike veljajo samo za ta stroj) - VARICON 7000-14: Rast 2,5 Plus, letnik izdelave 2016 – slike in video na zahtevo. Stroji so popolnoma delujoči. Cena za stroj VARICON 7000-1: Rast 5, Rast 2,5 Plus, letnik 2010.

Stanje: novo, Leto izdelave: 2026, – Kapaciteta 1,2 mm – Variabilna regulacija hitrosti – Z 9 kompleti valjev – Nožno upravljanje – Zaviralni motor Redjydhlzepfx Agtot – Nujna zaustavitev – Dokumentacija – 400V

Stanje: novo, Leto izdelave: 2025, najv. debelina jeklene pločevine: 4 mm, - Capacity 4 mm Rsdpfx Agjgg Nq Hotjt - Hydraulic roll adjustment - Foot switch - Brake motor - With 4 sets of rolls - Emergency stop - 400V

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, A used four-column punching press MABU with MPC200 control system, in very good technical condition. Pressing force 30° before BDC: 250 kN Stroke rate, infinitely adjustable: 80–400 strokes/min Stroke adjustment: 7–62 mm Redpfx Aeuh U Etsgtet Tool holder: diameter 40H7x90 mm Clearance between columns front/side: 404/334 mm For further technical data, please refer to the PDF document. Technical data and dimensions: subject to change/errors excepted.

Leto izdelave: 2019, stanje: zelo dobro (rabljeno), Širina materiala: 500 mm Hitrost: max 150 m/min Glavno odvijanje - Odvijanje z ležaji na obeh straneh - Pnevmatsko dviganje valja - Servo pogon Vakuumska rezalna miza - BST vodilo za rob materiala - Vakuumska postaja (2x) - Servo pogon - Nastavljiva širina materiala Štancača postaja - Servo pogon - Pnevmatsko upravljan PowerBridge - Enostavna menjava orodja zahvaljujoč premičnemu mostu - Kontrola registrskih oznak Navijalo/odvijalo - Ločen servo pogon za navijalo in pomožno os Rsdpeu Iucuefx Agtet - Smer vrtenja na obe strani - Pnevmatsko vpenjanje - Samodejni izračun premera Tube Scan - spremljanje materiala Enota za akumulacijo materiala (statika) Tandem navijalo - Ločen servo pogon v vsakem primeru - Trenjske gredi - Rezalna miza za fiksiranje materiala - Ločen zaslon S-CONtrol - Udobno in intuitivno upravljanje - Upravljanje uporabnikov in receptur - Zaslon na tirničnem sistemu

Leto izdelave: 2026, stanje: novo, Specification: Max. sheet size: 740 x 1060 mm Min. sheet size: 330 x 400 mm Maximum die-cutting force: 3.0 MN Speed: 8,000 sheets/hour Processable materials: Paper: min. 80 g/m² Cardboard: up to 2,000 g/m² Rsdpfxolyqrco Agtet Corrugated board: up to 4 mm Equipment: Non-stop feeder Manual non-stop device at feeder Blanking station Automatic non-stop rolling carpet Centerline Including platform 1 tool set Delivery time for the machine: 6–8 months after order

Leto izdelave: 2026, stanje: novo, Specification: Max. sheet size: 570 x 820 mm Rodpfx Agolyqpdotet Min. sheet size: 230 x 280 mm Maximum die-cutting force: 1.8 MN Speed: 8,000 sheets/hour Processable materials: Paper: min. 80 gsm Cardboard: up to 2,000 gsm Corrugated board: up to 3 mm Equipment: Sheet feeder Blanking station Automatic non-stop feeder apron Centerline system 1 tool set Delivery time: 6–8 months after order

Leto izdelave: 2026, stanje: novo, Specification: Max. sheet size: 740 x 1,060 mm Min. sheet size: 330 x 400 mm Maximum die-cutting force: 3.0 MN Speed: 9,000 sheets/h Processable materials: Paper: min. 80 g/m² Cardboard: up to 2,000 g/m² Corrugated board: up to 4 mm Equipment: Non-stop feeder Manual non-stop device at the feeder Blanking station Automatic non-stop roll apron Centerline Including platform 1 tool set Machine delivery time: 6-8 months after order Rjdpfx Agslyp Emetet

Stanje: rabljeno, Leto izdelave: 1999, Priključna napetost 220 V Nazivni tok 263/152 Št. stroja: Rjdpfx Aovvx E Sjgtot Teža stroja cca 1 t

Stanje: dober (rabljeno), Bending tool, die, upper blade, upper tool, upper beam - Press brake tool: from Lotze HDZ folding machine - Length: 2678 mm - Hole spacing: 100 mm / M10 - Dimensions: see drawing in the photos - Size: 2678/15/H57 mm Rjdoip Eqrepfx Agtet - Total weight: 15.7 kg

Leto izdelave: 1982, stanje: rabljeno, x-axis travel 970 mm y-axis travel 420 mm z-axis travel 430 mm Control unit: Heidenhain TNC 135 Number of spindle speeds: 12 Spindle speed range: 31.5–1400 rpm Feed range, longitudinal and cross: 8–2000 mm/min Feed range, vertical: 4–1000 mm/min Rapid traverse, longitudinal and cross: 4 m/min Rapid traverse, Z-axis: 2 m/min Redpfok H R H Ujx Agtot Table size approx. 1300 x 350 mm Machine weight approx. 3.8 t Dimensions approx. 3050 x 2350 x 2320 mm Movable milling unit with swiveling milling head: Manual adjustment up to max. 600 mm Swivels 90° to the left and right Vertical milling spindle mounted in quill, extendable by 100 mm

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna širina: 6.400 mm, skupna dolžina: 7.800 mm, skupna višina: 2.500 mm, skupna masa: 30.000 kg, New machine Machine for die-cutting, embossing, waste stripping, and blank separation Specifications: Maximum sheet size: 830 x 1,150 mm Minimum sheet size: 450 x 550 mm Maximum die-cutting force: 3.0 MN (300t) Speed: 7,000 sheets/hr Processable materials: Paper: min. 80 g/m² Cardboard: up to 2,000 g/m² Corrugated board: up to 4 mm Equipment: Manual non-stop feeder Automatic pile alignment at feeder 10” display at feeder Automatic non-stop delivery roll apron Stripping station Blank separation station Centerline system Automatic separator sheet inserter for stabilising blank stacks Quick-lock frames for upper stripping tool and central stripping board Quick-lock frames for upper and lower blanking tools Pneumatic chase clamps and die plate locking APC 1 – automatic cutting pressure control system APC 2 – platen tilting at the delivery end 1x 4 mm cutting plate incl. 10x 1 mm cutting plates 2x 5 mm cutting plates 1x quick-lock chase 2x chases without quick-lock QTM fine adjustment for cutting plates Sheet monitoring at each station with 2 sensors Rjdpot H Nhhsfx Agtot Incl. platform 1 tool set (Bobst system) Delivery time: 6-8 months

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 6.334 mm, skupna širina: 4.390 mm, skupna višina: 2.465 mm, skupna masa: 30.000 kg, New machine Machine for die-cutting, embossing, and waste stripping Rodpet H Nc Ssfx Agtjt Technical Data: Max. sheet size: 830 x 1,150 mm Min. sheet size: 450 x 550 mm Maximum die-cutting force: 3.0 MN (300 t) Speed: 7,000 sheets/h Materials processed: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated board up to 4 mm Equipment: Automatic non-stop roll-up delivery board Stripping station Centerline Quick-lock frame for upper stripping tool and central stripping board Pneumatic chase and die plate locking APC 1 – automatic die-cutting pressure system APC 2 – platen tilting at platen exit 1x 4 mm cutting plate incl. 10x 1 mm cutting overlays 2x 5 mm cutting plates 2x chase frames without quick lock Including platform 1 tool set (Bobst system) Delivery time: 6-8 months

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 858799A, Proizvajalec: Ruiyang Printing Machinery Co., Ltd., Kitajska Model: MH-1650 Vrsta stroja: Stroj za izsekovanje in žlebljenje Tip stroja: Avtomatski velikofornatni izsekovalnik Leto izdelave: 2014 Serijska številka: 858799A Tehnični podatki: - Maks. format polja: 1650 x 1210 mm Rjdpfjw Rb Ipox Agtot - Min. format polja: 650 x 550 mm - Maks. velikost izseka: 1620 x 1190 mm - Hitrost: do 3.200 pol/h - Priklop: 380 V, 50 Hz, 3 faze Posebnosti: - Avtomatski podajalnik s sesalno glavo - Staper za velikofornatne izhode - Robusna konstrukcija za karton in valovito lepenko - Upravljalna plošča z nadzornimi in varnostnimi funkcijami - Primerno za proizvodnjo velikih embalaž

Leto izdelave: 1999, stanje: pripravljen za uporabo (rabljen),

Stanje: dober (rabljeno), Leto izdelave: 1998, Neat used punching machine from Euromac Type: CX 1000 30 Capacity: 30 tons Throat depth: 1000 mm Rjdexld R Iopfx Agtjt Repositioning up to 10,000 mm Including tool cabinet with extensive tooling and multitool