Rodcraft Delavniška Stiskalnica - Hidravlična nakup rabljenega (4.443)

Stanje: rabljeno, Leto izdelave: 1992, Pressure: 75 t Throat depth: 280 mm Stroke: 303 mm Total power requirement: 15 kW Machine weight approx.: 7,000 kg Space requirements approx.: (dimensions not specified). Hydraulic C-frame press, Type HZS 75 Year of manufacture: 1992 Serial No.: H 92-2249 _____ Pressing force of the main ram: 75 t Table size: 750 x 515 mm Table height above floor: 820 mm Pass-through hole in table: 300 x 200 mm Max. installation height: 500 mm Throat depth: 280 mm Stroke of main ram approx.: 303 mm Ram area: 500 x 400 mm Ram bore: 50 mm Total drive approx.: 15 kW - 380 V - 50 Hz Weight approx.: 7,000 kg Overall machine height: 3,850 mm Accessories / Special features: - DUNKES program control type PC 10 with data input panel for pressure adjustment, pressure/time switch-over, top/bottom stroke, rapid traverse and working speeds, with digital display for pressing force, ram position, pressing time, program number. Memory for up to 30 tool programs. PLC: SIEMENS S5, teach-in button. - Press ram guided by adjustable prism strips. - Hydraulic shock absorption (cut/shear damping) mounted in the press cylinder, 15 mm. - Motorized depth stop and shear damping adjustment. - Double sheet detection = maximum pressing force applied only after reaching the pre-set stroke. - Hydraulic die clamps (4) on the table, hydraulic pin clamping in the ram, hydraulic ejector in the ram, 3 t/15 mm. - Two-hand safety release, electrical and infinitely variable return stroke limitation. - Overrun monitoring devices (NKS), ram switching of the main piston. Tsdpfx Alst Hwrzjtea - Attached control cabinet, connection for oil cooler, etc.

Stanje: rabljeno, Leto izdelave: 1990, Pressure 25 t Throat Depth 250 mm Stroke 100 mm Total Power Requirement 7.5 kW Machine Weight approx. 3,200 kg Space Requirement approx. 1,000 x 1,700 x 2,600 mm DUNKES CNC Controlled Hydraulic C-Frame Press Model HZS 25 Year of Manufacture 1990 Serial no. H 90-2018 _____ Pressing Force (Ram) 25 t Table Size 620 x 460 mm Table Height above Floor 820 mm Through Hole in Table 100 mm Todpfx Alst Hw Ezstja Maximum Installation Height 350 mm Throat Depth 250 mm Ram Stroke approx. 100 mm Ram Surface Area 500 x 350 mm Ram Bore 32 mm Working Speeds: Rapid Advance/Retract 400/400 mm/s At Partial Load / At Full Load 50 / 18 mm/s Total Drive Power approx. 7.5 kW - 380 V – 50 Hz Weight approx. 3,200 kg Machine Dimensions (L x W x H) 1,000 x 1,700 x 2,600 mm Accessories / Special Equipment: • DUNKES program control type CNC 100 with data entry panel for pressure setting, pressure/time switching, stroke upper/lower limit, rapid traverse and working speeds, as well as with digital display for press force, ram travel, pressing time, program number. Storage of up to x tool programs, SIEMENS S5 PLC, teach-in button • Hydraulic shock absorption installed in press cylinder • SICK – light curtain and two-hand safety control, • Intermediate tables mounted, control cabinet fitted • Overrun time 85 ms / overrun distance 30 mm, safety distance 170 mm Condition: good to very good – can be demonstrated under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. We always have a selection of hydraulic presses in stock, please contact us for further options.

Stanje: rabljeno, Leto izdelave: 1985, Pressure 63 t Clear width 1350 mm Stroke 300 mm Total power requirement 16 kW Machine weight approx. 10 t Space requirement approx. 2.0 x 1.8 x 3.4 m H Y D R A P Hydraulic double-column press (embossing press with sliding table) Model HPDb 63 Year of manufacture: 1985 Serial No. H 40/5273 Todpfx Aot Hwxueltsa Press force (top ram): 63 t Return force: 7 t Stroke approx.: 300 mm Table size: 1200 x 500 mm Ram plate: 1200 x 500 mm Max. installation height (without exchange device): approx. 400 mm Stroke speed up / down (at full load): 400/400 or 16 mm/sec Clearance between columns (front): 1350 mm Clearance between columns (side): 350 mm Ejector in ram, force/stroke: 1.2 t / 19 mm Pump drive: 11 kW Total drive approx.: 16 kW – 380 V – 50 Hz Weight approx.: 10,000 kg Machine dimensions (W x D x H): 2.0 x 1.8 x 3.4 m (+ swing table) Accessories / Special Features Sturdy double-column frame press with adjustable four-point prism guides, equipped with: • Hydro-pneumatic sliding table (approx. 625 mm transverse stroke) with two clamping surfaces for holding the pressed parts and lower tool. These are positioned under the ram for the pressing process and then moved to a stacking device at the rear after pressing. The table then returns to the starting station. This feature can also be easily removed or modified. • CNC press control (Siemens S5) with monitor for input of all relevant process data and storage of tool data for easier and quicker machine changeovers, as well as monitoring of part transport. Swing table holder included. • SICK light barriers fitted at the front of the press and loading station. • Ram equipped with electro-motorised depth stop (300 mm stroke) and hydraulic tool clamping system, also with hydraulic ejector integrated. • Pressure and oil temperature display, piece counter, foot switch, two-hand operation, central lubrication, hydraulic oil circulation cooling, stand-alone electrical cabinet, etc. The machine was used for pressing in edge trims on cylinder head gaskets. Condition: Good to very good – ready for demonstration, under power Delivery: ex stock, as inspected Payment: strictly net, upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 1971, Pressure: 200 t Clear width: N/A mm Stroke: 180 mm Table length: 690 mm Table width: 530 mm Distance between uprights: 420 mm Total power requirement: 18 kW Machine weight approx.: t Space requirement approx.: m E X N E R Hydraulic four-column press for embossing, coining, backward extrusion, calibrating, and punching (medals) Type: H4SP 200 # 1101-20 Year of manufacture: 1971, but has been overhauled several times since then _____ Press force downward: approx. 200 t Return force upward: approx. 20 t Usable table size: 420 x 220 mm Total table size: 700 x 530 mm Distance between columns (front): 420 mm Side distance: 220 mm Die height (table to ram, top): 380 mm Ram stroke: approx. 200 mm Piston/column diameter: 270/120 mm Piston bore: 50 mm Closing speed (ram): — Rapid traverse/load traverse/ram down: 330/10/180 mm/sec Total power requirement: approx. 15 kW — 380 V — 50 Hz Tjdpfx Ajt Hw Dwjltea Weight: approx. 3,000 kg Machine dimensions (L x W x H): approx. 1.4 x 1.3 x 2.75 m Accessories / Special Equipment - Hydraulic ejector in table with separate pressure regulation - Electric selector switch for continuous stroke/foot release/manual engagement/setup - Large pressure gauge and control lamps to indicate pressure achieved/depth achieved - Press stroke and rapid traverse are set via a switching linkage with limit switches on either side of the press piston - Pressure is controlled via a fine-adjustment pressure valve - Reversal from pressing stroke to return stroke via pressure switch or limit cam - Control cabinet and hydraulic unit, all compactly attached and easily accessible - Previously equipped with automation, but only various pneumatic lines and valves remain

Stanje: dober (rabljeno), Leto izdelave: 1984, številka stroja/vozila: 054-008-212, Ponudba 25272 Tehnični podatki: - največja stiskalna sila: 25 t Tjdpfxsy Ewtrj Altsa - največji hod bata: 500 mm - hitrost hoda: 0 - 2,4 m/min - povratni hod: 0 - 12 m/min - vgradna višina: 800 mm - izseg do sredine bata: 360 mm - vpenjalna površina bata: 440 x 360 mm - vpenjalni zatič bata: 40 mm - dimenzija mize: 630 x 500 mm - odprtina mize / preboj: 180 mm - električno nožno stikalo - dvoročno upravljalno konzolo - pogon: 400 V / 8,75 kW - potrebni prostori približno: Š 800 x V 2750 x G 1150 mm - teža pribl. 2000 kg

Stanje: dober (rabljeno), Leto izdelave: 1981, številka stroja/vozila: 022-009-36, Ponudba 24374 Tehnični podatki: - maks. stiskalna sila: 100 t - maks. hod bata ca.: 500 mm - hitrost hoda: 25 mm/sek. - povratni hod: 125 mm/min - vgradna višina ca.: 1000 mm - izpust do sredine bata: 380 mm Tjdpfsxuhzcjx Altoa - vpenjalna površina bata: 530 x 400 mm - vpenjalni čep bata: 40 mm - velikost mize: 750 x 560 mm - odprtina v mizi / preboj: 200 mm - višina mize nad tlemi: 720 mm - količina olja ca.: 200 l - pogon: 400 V / 11 kW - zahtevan prostor ca.: Š 1150 x V 3250 x G 1850 mm - teža ca.: 4600 kg

Stanje: novo, Tlak: 175 t Dolžina upogiba: 3100 mm Razdalja med stojali: 2600 mm Izraz stojala: 410 mm Hitrost bata: 160 mm/s Delovna hitrost: 10,0 mm/s Hitrost povratka: 120 mm/s Delovna dolžina: 265 mm Vgradna višina: 480 mm Višina mize: 900 mm Širina mize: 90,0 mm Vsebnost olja: 230 l Delovna napetost: 400 V Skupna potrebna moč: 18,5 kW Teža: 10500 kg Dimenzije (D x Š x V): 4100 x 2000 x 2820 mm ALPMAC, video proizvajalca: ?v=_FxXyPAcxlE ?v=YfkX9RwWv_0 ALPMAC, video izdelka, model B: ?v=lmT1tfy43WE Dodatni video stroja: ?v=Xg1TlKEuI1w ----- SERIJA MODELOV B175-3100 – CNC elektro-hidravlična upogibalna stiskalnica z: * povečano vgradno višino * povečano hodnost valja * povečan izraz ----- ! IZDELANO IZ CERTIFICIRANEGA KAKOVOSTNEGA JEKLA (ST 37-42-52) ! VISOKO ZMOŽNE HIDRAVLIČNE KOMPONENTE (HAWE GERMANY) ! VISOKA RAVEN TIHOTEGA DELOVANJA ZARADI NIŽJEGA DELOVNEGA TLAKA (50-60 DB) ! INDUKCIJSKO OBRADANI IN KROMIRANI VALJNI BATI ZA TRAJNO UPORABO ! ZADNJA OGRADA IZ LITEGA ALUMINIJA ! ZADNJA OGRADA Z MOČNIM POGONSKIM MOTORJEM (1,0 kW) ! MIZA STROJA IZ MOČNEGA IN ODPORNEGA JEKLA (C45) Zelena ECO tehnologija: manjša poraba, več miru, popoln nadzor. ! Vrhunska zmogljivost pri minimalni porabi energije ! maksimalna moč pri minimalnih stroških Todpjxaa Eqsfx Altja ! Najvišja zmogljivost, kadar je resnično potrebna ! Glavni motor se aktivira šele s pritiskom na stopalko ! brez porabe energije v stanju pripravljenosti ! nadzorovan proces zagona Oprema: - CNC elektro-hidravlična upogibalna stiskalnica - CNC krmilnik DELEM, model "DA-58T", grafični zaslon/na dotik * 2D grafično programiranje * 15-palčni barvni zaslon TFT z visoko ločljivostjo * Izračun zaporedja upogibanja * Programiranje izdelkov in prikaz v dejanski velikosti * USB vmesnik - CNC krmiljena os: Y1 – Y2 – X – R – bombiranje - CNC elektro-motorna zadnja ograja (os X) * na krogličnih vretenih * hod ... največ 750 mm * hitrost premika osi X ... 350 mm/s * z 2 ročno nastavljivima prstom ograje - CNC elektro-motorna nastavitev višine (os R) * hod ... največ 250 mm * hitrost premika osi R ... 300 mm/s - CNC elektro-motorno bombiranje mize - zgornji orodje ROLLERI, tip "PS 135.85-R08", sistem "A" * vključno s hitrim pritrdilnim sistemom * vključno z napravo za bombiranje v nosilcu orodja - ROLLERI, deljeni univerzalni matrični blok "M 460 R" * vključno z 1 matričnim podstavkom "C 1050-R" - varnostna naprava na zadnji strani: svetlobna pregrada - hidravlične komponente HAWE - FIESSLER AKAS laserska zaščitna naprava pred strojem (vključno z FPSC) - 2 sprednji podpiralni roki s sistemom SLIDING * preprosta in brez ključev nastavljiva višina - FIESSLER dvojna stopalkna upravljalna enota - CE oznaka / izjava o skladnosti

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Tlak 60,0 t Dolžina upogiba 2600 mm Razdalja med stojali 2100 mm Izstop stojal 200 mm Gib zgornje matrice 100 mm Vgradna višina 280 mm Višina mize 840 mm Delovna hitrost 10,0 mm/s Hitrost vrnitve 70,0 mm/s Zadnji opornik – nastavljiv, največ 650 mm Krmilnik ATS 560 Količina olja približno 150 l Napetost 380 V Skupna poraba moči 7,5 kW Masa stroja približno 4700 kg Dimenzije D-Š-V 3800 x 1400 x 2200 mm Oprema: - elektrohidravlična NC upogibna stiskalnica – enostavna za uporabo - HACO NC krmilnik, model ATS 560 * 7-mestni LED prikazovalnik * Pomnilniška kapaciteta za 200 programov z največ 400 koraki * Delo s tlakom in globino potopa * Funkcija za elektronski zadnji opornik * Vnos želenih/dejanskih vrednosti za zadnji opornik * vrtljiv nadzorni panel, spredaj levo - NC-krmiljene osi: Y1 + Y2 + os X - NC elektrohidravlično sinhrono uravnavanje in uravnavanje globine potopa - NC elektromotoriziran zadnji opornik * z krogličnimi vijačnicami * hitrost 240 mm/s * vključno z 2x ročno nastavljivima opornikoma za širino in višino * zadnji opornik programirljiv z natančnostjo 0,1 mm Tjdpfxozbc Dmo Altsa - ročna nastavitev mize, z ročnim kolesom in analognim prikazom - nastavek za orodje "SYSTEM A" zgoraj, vključno z nastavitvijo zgornjega klina - nastavek za orodje "SYSTEM A" spodaj - različna orodja za obdelavo/upogibanje - 1x samostojno upravljanje z roko/nogo * premika se samo pri delovni hitrosti - navodila za uporabo v obsegu dobave je vključen tudi (vgrajen): - 1x tovarniško nov/razdeljen komplet zgornjih orodij * UKB 11.200 mm - 3x 835 mm * Kot 85° - polmer R 0,8 mm - višina 66,5 mm * Nosilnost 1000 kN/m maks. - 1x tovarniško nov/razdeljen komplet spodnjih orodij * UKB 21.207 - 3x 835 mm * V odprtine = 16/22/35/50 mm * Kot 85° * Nosilnost 800 kN/m maks.

Stanje: pripravljen za uporabo (rabljen), Hidravlična stiskalnica, stiskalnica za navijanje tuljav, rabljena oprema Tedpfx Alsu Hkfpstsa Dimenzije: 1340 x 1240 x 2740 mm Teža: 640 kg Električne specifikacije: 400 V Hidravlični tlak: 100 bar Hod bata: 180 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Pressure: 135 t Bending length: 3050 mm Frame width: 2550 mm Installation height: 320 - 560 mm Stroke: 240 mm Working speed: 10.0 mm/sec Return speed: 150 mm/sec Throat depth: 400 mm Working height: 1050 mm Control system: DNC 1200 PS/B Max. operating pressure: 297 bar Compressed air: 4.5 - 6.0 bar Connected load: 15.0 kW Oil capacity: 250 ltr. Weight: 11,500 kg Dimensions (L x W x H): 5240 x 2400 x 2900 mm In good / well-maintained condition (!!) Previously used in aluminium processing - Tested condition - Machine video - ?v=z-Bxibk_8uE Equipment: - CNC electro-hydraulic press brake - CYBELEC CNC control unit, model DNC 1200 PS/B * Serial no.: 0080 * Swiveling control panel, front right * Numeric programming * Tool & program library - CNC-controlled axes: Y1 + Y2 + X + R + CNC crowning - CNC electro-motorized backgauge (X-axis) * With 3x manually adjustable stop fingers (Z-axis) * Travel speed max. 250 mm/sec. - CNC electro-motorized height adjustment for backgauge (R-axis) Todpfxsx Ik D Ao Altja * Travel speed max. 100 mm/sec. - CNC lower table crowning - CNC pneumatic die shifting (I-axis) - Pneumatic upper tool clamping - Pneumatic lower tool clamping - Rear safety guard incl. swiveling door - 2x side safety guards - Includes LAZER SAFE safety system (front) - 2x robust front support arms with "Sliding-System" - Original EHT segmented top and bottom tools - 1x mobile 2-hand/foot control - Circuit diagram + hydraulic diagram

Stanje: rabljeno, Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, hod: 200 mm, sila umika: 10 t, skupna masa: 5.700 kg, obratovalni tlak: 250 letvica, vgradna višina: 450 mm, pritisk: 250 letvica, We are offering this used Lauffer RPT100 hydraulic press, year of manufacture 1992. Machine Type: RPT100 Machine No.: 14161 Year of Manufacture: 1992 Weight: 5,700 kg Maximum Upper Ram Pressing Force: 1,000 kN Maximum Lower Ram Pressing Force: 100 kN Upper Ram Return Force: 100 kN Lower Ram Return Force: kN Maximum Upper Ram Stroke: 200 mm Maximum Lower Ram Stroke: 80 mm Maximum Operating Pressure: 250 bar Installation Height: 450 mm Overrun Distance: 20 mm Overrun Time: 84 ms Safety Distance: 134 mm For sale is a hydraulic downstroke press / high-speed press from the quality manufacturer Maschinenfabrik LAUFFER GmbH & Co. KG. Technical Data: Tjdpfoywiyuox Altea Manufacturer: LAUFFER Description: High-speed oil-hydraulic press / hydraulic downstroke press Type: RPT 100 Year of Manufacture: 1992 Serial No.: 14161 Pressing Force: 1,000 kN (≈ 100 t) Operating Pressure: 270 bar Stroke (Ram): 307 mm Clamping Surface / Table: 710 × 450 mm Passage: 710 × 560 mm Distance between Clamping Surface and Ram: 450 mm Column Spacing (as per specification): 830 mm (width) / 280 mm (long side) Power Requirement: 15 kW Pump Flow Rate: 30 l/min Speed: 1,500 min⁻¹ Oil Capacity: approx. 450 l Oil Specification: HLP 46 (DIN 51525) Condition / Inspection: Used machine from industrial stock. Viewing and collection by prior arrangement. Collection/Logistics: Loading by crane included.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, HYDRAULIC PRESS BRAKE COLMAL 3000X250 TON, 4 AXES, 300 mm THROAT DEPTH. OVERALL DIMENSIONS: 380X350X180 (H) cm, WEIGHT 14,100 KG Tsdswyng Sopfx Altea

Stanje: rabljeno, Leto izdelave: 2006, Tlak 135 t Upogibna dolžina 2550 mm Razmak med stojali 2050 mm Krmiljenje CYBELEC ModEva 10 S Vgradna višina 570 (EHT) mm Skupna potrebna moč 25 kW Teža stroja cca 11.000 kg Stroj: - Stabilen strojni okvir kot varjena jeklena konstrukcija - Tlačna prečka z visoko upogibno trdnostjo - Elektrohidravlični pogon zgornje prečke preko proporcionalnih ventilov - Sodobna blok hidravlika Posebna oprema: - Povečanje vgradne višine in hoda za po 150 mm - Zadnji prijemni sistem 2 - 2 osi, nastavitev R-osi 150 mm - 2 x dodatna prijemna prsta 2/4-osna, vendar zamaknjena za 20 mm - CNC podpora pri upogibanju - Razdalja upogibne linije do podpore cca 240 mm - EHT hitrovpenjalna naprava za EHT zgornje orodje, pnevmatska, širina glave 26 mm, vodoravno samocentrirajoča - EHT vpenjalni sistem za spodnje orodje, nosilna širina 55 mm, pnevmatska - Kaljena vložna letvica za EHT vpenjalni sistem spodnjih orodij 55 mm / 90 mm - CNC upravljano premikanje matrice, brezstopenjsko - CNC bombirni sistem v mizi (minimalna širina mize 110 mm), brez vpenjanja orodja - Varnostna naprava SICK V4000 - 2 x pomožna roka za upogibanje, maks. 1500 N - 2 x 2 nosilna letva za pomožno roko z utorom T 14 mm in merilnim trakom Todpfx Aoy D T S Isltja - 2 x podaljšek mize za pomožno roko - Parkirni položaj desno in levo, kratka

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Distance between uprights: 1,870 mm Tsdpfx Alowyuqkjtea Installation height: 1,400 mm Table length: 1,600 mm Length: 3,400 mm Width: 3,400 mm Height: 3,500 mm Weight: 19,000 kg

Stanje: novo, Condition new Delivery time approx. 14 - 16 weeks from order Country of origin: Turkey Price: €83,200 Leasing rate: €1,572.48 Press force: 130 t Nominal press force at 4.5 mm Table length: 650 mm Table width: 950 mm Table through-hole: 220 mm Stroke: 1 - 132 mm Strokes per minute: 50 Ram guides: 6 Ram adjustment: 95 mm Ram bore: 70 mm Throat depth: 325 mm Installation height: 500 mm Motor: 11 kW Length: 1,800 mm Width: 1,725 mm Height: 3,020 mm Weight: 8,000 kg Welded steel frame construction 6-fold ram guide Pneumatic clutch-brake combination Safety enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Motorized ram adjustment Variable stroke rate via frequency inverter Operating modes: * Setting mode * Two-hand activation * Foot pedal activation * 2-cycle operation via light barriers * Continuous operation Touchscreen for: * Stroke counter with preselection for continuous operation * Stroke rate adjustment * Lubrication intervals and duration * Alarm messages * Motor rotation direction * Monitoring of inputs and outputs 2 free cams for peripheral device integration Automatic central lubrication Equipped according to CE regulations Sample images, shown with optionally available clamping plate OPTIONS: Tsdpfx Aswiqn Rsltea Vibration pads €192.00 Clamping plate on request Hydraulic overload protection on request etc.

Stanje: dober (rabljeno), Leto izdelave: 1999, številka stroja/vozila: H99-2989, Funkcionalnost: popolnoma funkcionalen, moč: 24 kW (32,63 KM), vhodna napetost: 400 V, vhodni tok: 63 A, vhodna frekvenca: 50 Hz, stiskalna sila: 63 t, hod: 420 mm, obratovalna hitrost: 92 mm/s, hitrost vzvratne vožnje: 430 mm/s, širina mize: 620 mm, dolžina mize: 520 mm, višina mize: 1.000 mm, širina plošče bata: 600 mm, dolžina plošče bata: 400 mm, tabela razdalj do bata: 610 mm, razmak između stupova: 800 mm, kapaciteta rezervoarja za olje: 700 l, skupna dolžina: 1.400 mm, skupna širina: 1.900 mm, skupna višina: 3.800 mm, skupna masa: 4.500 kg, Oprema: CE označba, dokumentacija / priročnik, Prodajam hidravlično vlečno stiskalnico, v dobrem stanju, vključno z vlečnim prijemalom (sila 250 kN, hod 150 mm, površina vlečnega prijemala 300 mm x 420 mm). Redni pregledi v skladu s predpisi o varnosti in zdravju pri delu so bili izvedeni, zadnji pregled je bil leta 2024. Stroj je bil uporabljan v enosmenskem delovnem ciklu za izdelavo prototipov. Tjdpfx Aozl R Imsltja Cena ne vključuje demontaže in transporta.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1972, Funkcionalnost: popolnoma funkcionalen, Tlačna sila: maks. 1.250 t Tedpfx Alswuutbetea Prosta odprtina: 585 mm Vgradna višina: maks. 480 mm Hod: maks. 355 mm Teža: 9.000 kg Opomba: Stiskalnica je bila leta 2002 delno obnovljena s strani SACK & KIESSELBACH in je prejela nov krmilni sistem.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1965, Funkcionalnost: popolnoma funkcionalen, Tlačna sila: maks. 630 t Prosta odprtina: 420 mm Vgradna višina: maks. 320 mm Tjdpoyylhaofx Altea Hod: maks. 310 mm Teža: 3.700 kg.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, Pressing force: max. 630 t Todpfx Asgwv S Usltja Installation height: max. 375 mm Stroke: max. 275 mm Weight: 4,500 kg

Stanje: dober (rabljeno), Leto izdelave: 1986, številka stroja/vozila: 057-016-47, Ponudba 26185 Tehnični podatki: - maks. sila stiskanja 160 t - maks. hod bata približno 500 mm - povprečna delovna hitrost približno 92 mm/s - hitrost povratnega giba 125 mm/s - višina vgradnje približno 1000 mm - razdalja do sredine bata 360 mm - pritrdilni čep bata 40 mm - velikost mize 900 x 630 mm - luknja/odprtina v mizi 220 mm - višina mize nad tlemi 720 mm - količina olja približno 200 l Todozn H Rvjpfx Altsa - pogon 400 V / 17 kW - potreben prostor približno Š 1150 x V 3400 x G 1850 mm - teža približno 7500 kg

Stanje: novo, Leto izdelave: 2025, OMCN P30/SA hydraulic press with dual-speed manual hand pump, 30 tons. The OMCN P30/SA hydraulic press is operated manually via a two-speed hand pump and features a robust base frame for maximum stability and minimal floor space requirements. Thanks to its slotted frame, the support base is height-adjustable to 9 different positions, allowing the press to handle components of various sizes. The winch makes lifting the worktable practical and fast. +Fast approach stroke +High precision An essential tool for workshops and industrial environments, perfect for pressing metal parts such as assembling mechanical groups, fitting bearings or pulleys onto shafts. Made in Italy, CE certified, constructed with high-grade materials to ensure long-term reliability. The press can generate a force of 30,000 kg. Todpfjklyvtjx Altea Dimensions 2180 x 1300 x 600 mm Weight 280 kg Capacity 30 tons Distance between uprights 695 mm Ram stroke 190 mm Ram diameter 60 mm

Stanje: novo, Leto izdelave: 2025, OMCN 100 Ton Electro-Hydraulic Press Mod. 164/R Made in Italy ELECTRO-HYDRAULIC DOUBLE-SPEED PRESS AUTOMATIC, EQUIPPED WITH PRESSURE GAUGE Hydraulic press with high-speed motor, featuring a manometer and a double-speed hydraulic power unit. Rapid approach and return are achieved using a vane pump, while the working phase operates via an axial piston pump. Equipped with a pressure adjustment valve and a three-position control lever (advance - neutral - return). The machine is supplied with oil and features a winch for lifting the working table. The piston rod is made of specially treated and chrome-plated steel. The press is fitted with a two-hand control system and concurrency protection in accordance with current safety standards. Tedpfxofh R Nyj Altea Included are rear and side safety guarding panels. Fully CE approved, with electromagnetic compatibility. Piston stroke: 310 mm Clearance (internal opening): 1,010 mm

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, The P50MR motorized hydraulic press ensures high performance and maximum operational precision thanks to its robust, fully laser-cut frame, with no welds at the points of greatest stress. It is equipped with an immersed 400 V 50-60 Hz motor unit, a rapid approach and return pump factory set to 20 bar, and a pressure pump with an adjustable handwheel for delivering the required power. It also features a maximum pressure valve with mechanical lock to prevent overpressure, and the standard pressure gauge allows extremely precise calibration of the delivered force. Specifications: - Force: 50 Ton - Internal frame width: 800 mm - Approach speed: 1800 mm/min - Working speed: 350 mm/min - Rapid flow rate: 26 l/min Tsdofvhqgjpfx Altea - Slow flow rate: 5 l/min - Cylinder stroke: 300 mm - Cylinder bore: 135 mm - Rod diameter: 70 mm - Ram end diameter: M30 - Tank capacity: 50 liters - Max. pressure: 350 bar - Voltage: 400 V - Frequency: 50-60 Hz - Motor power: 3 kW - Max. absorbed current: 5.5 A - Weight: 500 kg - Dimensions: 1550 x 800 x 1965 (h) mm

Stanje: rabljeno, Leto izdelave: 2019, Pressure: 100 t Bending length: 3050 mm Frame gap: 3250 mm Control: Delem DA 66T Y-axis stroke: 300 mm Installation height: 590 mm Approach speed: 75 mm/sec Bending speed: 20 mm/sec Return speed: 75 mm/sec Total power requirement: 11 kW Machine weight: approx. 6.5 t Space requirement: approx. 4.3 x 2.0 x 2.9 m Demonstration unit Tjdev R Hvnepfx Altja Y1 / Y2 axes servo-electric Punch clamping: hydraulic (WILA Premium) Die clamping: hydraulic (WILA Premium) incl. motorized crowning Back gauge system: "DENER" X-, R-, Z1-, Z2-axis FIESSLER AKAS LC II M Type 4 (manual) with box bending function Rolleri quick-change segmented tooling: Punch: TPR200.28.R1, Die: TMR100.12.30 over 3,050 mm length

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: 1606.18, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 163 t, hod: 700 mm, širina mize: 2.000 mm, dolžina mize: 1.400 mm, višina mize: 800 mm, skupna dolžina: 2.400 mm, skupna širina: 3.200 mm, skupna višina: 5.200 mm, skupna masa: 28.000 kg, Oprema: dokumentacija / priročnik, Hidravlična 4-stebrična preša – 163 T – 2.000 × 1.400 mm Za prodajo je na voljo hidravlična 4-stebrična preša proizvajalca HYMAG z maksimalno silo prešanja 163 T. Stroj ima velikost mize 2.000 × 1.400 mm, odprto višino 1.300 mm, hod 700 mm in je tako primeren za operacije oblikovanja, popravljanja, prešanja, vstavljanja in montaže v industrijski uporabi. ##### Tehnični podatki + informacije: Hidravlična 4-stebrična preša – 163 T – 2.000 × 1.400 mm ==== Splošni podatki - Proizvajalec: HYMAG - Tip: Hidravlična 4-stebrična preša - Model: HS 4 160-K3 - Serijska številka stroja: 1606.18 - Leto proizvodnje: 2015 - Sila prešanja: 163 T - Nazivna sila: 1.600 kN - Velikost mize (uporabna površina): 2.000 × 1.400 mm - Velikost plošče bata: 2.000 × 1.400 mm - Višina mize: 800 mm - Odprta višina: 1.300 mm - Hod: 700 mm - Sprednji prehod: 2.010 mm - Stranski prehod: 900 mm - Skupna višina: 5.200 mm - Skupna širina: 3.200 mm - Skupna globina: 2.400 mm - Skupna teža: 28 T - Potrebna klet: ne ==== Hidravlični valj - Maks. delovni tlak: 305 bar - Hitrost povratnega gibanja navzdol: 220 mm/s - Hitrost povratnega gibanja navzgor: 150 mm/s - Začetna hitrost prešanja: 45 mm/s ==== Hidravlika in pogon - Glavni motor: 55 kW - Dodatna hidravlika: 7,5 kW - Pomožni motor: 7,5 kW - Hladilni motor: 1,5 kW - Rezervoar za olje: 600 l - Tip pogona črpalke (pogon I): V30D115RKN Tsdpfx Alezq Apgstea - Tip pogona dodatne hidravlike (pogon II): PGH3-2X/016 - Tip hladilnika: TFS/A-20-400 ==== Nastavek za orodje - T-utori: M20 po DIN 650 ==== Upravljanje - Napetost ventila: 24 V ==== Varnost - Blažilnik udarca - Oprema za vzdrževanje - Pomožni hod: 17 mm - Čas pomožnega hoda: 90 ms - Varnostna razdalja: 180 mm ==== Električna priključitev - Delovna napetost: 400 V - Poraba toka glavnega motorja: 98 A - Napetost pomožnega motorja: 400 V - Poraba toka pomožnega motorja: 15 A - Napetost hladilnega motorja: 400 V - Poraba toka hladilnega motorja: 4 A ##### Področja uporabe: Oblikovanje, globoko vlečenje, popravljanje, vstavljanje, žigosanje, montažne operacije, orodjarstvo, izdelava orodij, strojno inženirstvo, obdelava kovin, proizvodnja po naročilu, serijska proizvodnja. (Hidravlična 4-stebrična preša, 4-stebrična preša, hidravlična preša, HYMAG, HYMAG HS 4 160-K3, 163 T preša, 163 tonska preša, preša za oblikovanje, preša za globoko vlečenje, preša za popravljanje, preša za vstavljanje, montažna preša, industrijska preša) Iščete hidravlično prešo, prilagojeno vašim zahtevam? Kontaktirajte nas za individualno ponudbo. Naše hidravlične preše so izdelane v skladu z nemškimi smernicami za stroje in evropskimi smernicami za stroje (smernica 2006/42/ES), standardi ES in varnostnimi predpisi EU. Poleg tega naše preše presegajo kanadske in evropske varnostne zahteve, saj izpolnjujejo vse točke nacionalne brazilsko-ameriške varnostne smernice NR 12, na podlagi katere so zasnovane. Naša velika prednost je proizvodnja specialnih strojev in avtomatizacija preš. Prodajamo hidravlične preše po presenetljivo ugodnih cenah. Za hidravliko preš se pretežno uporabljajo komponente vodilnih evropskih proizvajalcev.