Prezračevalna Postaja nakup rabljenega (701)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, barva: drugo, Leto izdelave: 2026, Kot Constmach razvijamo mobilne asfalterne postaje, ki nudijo prilagodljivost, hitrost in učinkovitost pri infrastrukturnih in cestnih gradbenih projektih. Zaradi prenosljive zasnove je naše mobilne postaje mogoče enostavno prepeljati z enega projekta na drugega, kar zmanjša časovne izgube in omogoča hitro montažo. Z zmogljivostjo od 60 do 160 ton/uro lahko proizvajajo asfalt enake kakovosti kot fiksne postaje. Njihova kompaktna zgradba, integriran šasijski sistem in napredna avtomatizacija še dodatno poenostavljajo proizvodne procese in povečujejo učinkovitost na terenu. Ključne lastnosti: - Visoka zmogljivost: 60–160 ton/uro, primerno za projekte različnih obsegov. - Prilagodljiv dizajn: Moduli, ki jih je mogoče prilagoditi glede na potrebe projekta. Ncodpfx Ahexpyhds Uet - Hitra postavitev: Zagotavlja zagon v krajšem času brez priprave gradbišča. - Napredni krmilni sistemi: Natančna in brezhibna proizvodnja z avtomatsko PLC-krmilno enoto. Mobilne asfalterne postaje Constmach združujejo hitrost, kakovost in učinkovitost v eni rešitvi. Zaradi enostavne transportnosti, energijsko učinkovite proizvodnje in dolgotrajnih sestavnih delov so vaše najzanesljivejše partnerke v proizvodnji asfalta. Izberite mobilne asfalterne postaje Constmach, da hitro pričnete s projekti in dosežete razliko v kakovosti asfaltne proizvodnje! Zakaj mobilne asfalterne postaje Constmach? - Vrhunska kakovost: Vse glavne komponente so izdelane iz visokotrdnostnih materialov in zagotavljajo dolgotrajno ter varno uporabo. - Visoka učinkovitost: Zagotavlja enakomerno proizvodnjo v vseh pogojih s pomočjo naprednih sistemov za ogrevanje, mešanje in doziranje. - Okolju prijazno: Z vrečnimi filtri in nizkimi emisijskimi vrednostmi omogoča okoljsko odgovorno proizvodnjo. - Enostaven transport: Modularna in kompaktna zgradba omogoča lahek prevoz s tovornjakom ali prikolico. - Podpora uporabnikom: Prisotni smo v vseh fazah – od inženiringa in načrtovanja pred prodajo do tehnične podpore po prodaji. Kaj počnemo pri Constmach? Constmach je vodilni proizvajalec strojev za gradbeno in rudarsko industrijo s širokim naborom izdelkov. Naša ponudba zajema stroje za izdelavo betonskih blokov, stacionarne in mobilne betonske centrale, stroje za drobljenje kamna, drobilne in presejalne postaje, pralnike in izdelovalce peska, asfaltne postaje, transportne tračne sisteme, čeljustne drobilce in mobilne drobilne postaje. Z visokimi standardi kakovosti, inovativnim pristopom in rešitvami, usmerjenimi v stranke, je Constmach prepoznaven kot zanesljiva blagovna znamka tako na nacionalnem kot tudi mednarodnem trgu. Naši izdelki so zaradi vzdržljivosti, učinkovitosti in dolgotrajne zmogljivosti stalna izbira strokovnjakov iz industrije.

Leto izdelave: 2000, stanje: rabljeno, Tank & Environmental Protection Wozniack Dear Sir or Madam, We offer: 5,000-litre double-walled storage tank Nominal volume: 5 cbm Quantity: 1 Used: but fully refurbished, i.e. the tank has been cleaned, sandblasted, primed, and painted Paint finish: RAL colour of your choice; of course, you can specify your preferred colour at any time. Material: steel-in-steel construction, material grade S235JRG2 Documentation: Manufacturer’s certificate / inspection certificate according to DIN 6616 D/2 and type plate Included: 1 x dipstick overfill prevention device (Grenzwertgeber), new 1 x breather fitting 1 x fill connection 1 x new leak detection device with filled leak detection liquid 1 x ladder 1 x suction line Form: cylindrical storage tank with supports / mounting console Tank dimensions: length approx. 2,710 mm; diameter approx. 1,600 mm; weight approx. 1,500 kg Installation: above-ground Compact Piusi 56 diesel dispensing unit Pump: 230 Volt, up to 55 L/min (optionally available with 70 L/min) ===== Naturally, you can help design your own tank system! We gladly accommodate your colour and equipment preferences where possible. All our units are thoroughly inspected and tested by selected employees at our company. Cost-effective delivery available upon request. Viewing of our equipment is possible at any time. Other tank systems for both above-ground and underground storage are available in all sizes and can be viewed at our premises. Have we convinced you with our offer? If you have any questions or special requests, simply give us a call—one of our experienced staff will be happy to assist you. We are also interested in purchasing existing tank systems at any time. Trade-in of existing installations is possible. Best regards from Warstein, Tank and Environmental Protection Wozniack Enkerbruch 2 Nedpsc Nkrpofx Ah Uoct 59581 Warstein

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 10.000 l, Diesel refueling station – On-site refueling station – Commercial refueling installation – consisting of: 1 x storage tank, 10,000 liters capacity, used 1 x fuel dispenser, model Eco 75, brand new Storage tank description: According to DIN 6616-D, above-ground, double-walled, including test certificate. The tank is supplied with two saddle feet, a manhole with dome cover, is used, internally emptied and professionally cleaned, equipped with the following fittings: - 1 fill pipe with TW cap (filler cap) and dip pipe - 1 gauge pipe with dipstick and dipstick closure Ncsdei An Ufspfx Ah Uet - 1 vent pipe with ventilation hood - 1 brand new overfill prevention sensor with type approval (AIII) - 1 ladder and 1 spare socket for extraction purposes - 1 optical leak detection device with type approval and leak detection liquid The tank will be newly primer-coated and painted externally (RAL color tone). L = approx. 5.30 m - D = 1.60 m - Weight approx. 2.4 t - ex works, loaded free of charge Fuel dispenser description: Model Eco 75 – not suitable for calibration (non-legal-for-trade), Delivery rate up to approx. 75 l/min, suitable for diesel fuel, including: - Fuel management terminal with connection to myTecalemit Cloud - Incl. web-based tank data management software – Basic module - 2 ID systems for driver/vehicle, max. 4,000 users - Identification via transponder technology - USB interface for data retrieval - Vane cell pump with single-phase asynchronous motor – 230 Volt - Oval gear meter with pulse generator, accuracy approx. +/- 0.5% - Angle seat filter / dirt filter with fine-mesh strainer - 4 m hose DN 25 with type-approved automatic nozzle, including swivel joint and nozzle holder - Nominal suction height approx. 3.5 m / max. suction line length = 6.0 m - Robust powder-coated sheet steel housing Dimensions: approx. 1,410 x 520 x 275 mm - Two-line illuminated monochrome display, character height 8 or 19 mm - Memory for up to 10,000 fueling transactions - Menu guidance in German, English, and French Magnetic keys / transponders are additionally required. General: You will receive an invoice with VAT shown separately. Purchase subject to our General Terms and Conditions. Other tank systems (new and used) as well as rental systems are also available! Additionally, we purchase existing tank systems and can, with certified specialist qualification according to the German Water Resources Act (§ 62 WHG), professionally empty, clean, dismantle, and transport them away.

Stanje: rabljeno, - Kolut etiket: 250 mm - Višina izdajnega roba od tal: nastavljiva od 50 do 100 cm. - Premično na kolesih Ncsdpfxjx H Tmqs Ah Uot

Leto izdelave: 2003, stanje: rabljeno, Mobile cooking station with ceramic hob/frying station and bain-marie Ncsdpfx Ahoh Euuzs Uot

Stanje: zelo dobro (rabljeno), Das Hamilton FLOW PCR Setup Instrument ist eine kompakte Laborroboter-Workstation zur vollautomatischen Vorbereitung von PCR- und qPCR-Ansätzen. Sie wurde entwickelt, um manuelle Pipettierfehler zu minimieren und den Probendurchsatz zu erhöhen. Das System kommt häufig in Verbindung mit Roche Life Science-Produkten wie dem MagNA Pure 96 System und dem LightCycler® 480 innerhalb der FLOW-Lösung zum Einsatz. Merkmale und Spezifikationen Das Hamilton FLOW PCR Setup Instrument (PSU) überzeugt durch Präzision und nahtlose Integration in automatisierte Labor-Workflows. Nedpfjyk Uxnox Ah Uoct Automatisierung: Vollautomatisches Pipettieren und Verteilen von PCR-Komponenten (Proben, Mastermixe, Primer) auf 96- oder 384-Well-PCR-Platten. Volumenbereich: Ausgelegt zur Aspiration und Dosierung von Volumina bis maximal 1 ml. Rückverfolgbarkeit: Integrierte Barcode-Erkennung für Zubehör und Verbrauchsmaterialien zur lückenlosen Probenverfolgung. Software-Integration: FLOW-Software ermöglicht den Import von Testaufträgen aus Laborinformationssystemen (LIMS) und Rückmeldung der Ergebnisse. Die Software unterstützt eine intuitive Konfiguration der PCR-Setups. Flexibilität: Betrieb als Stand-Alone-Gerät für das PCR-Setup oder im „FLOW Flex“-Modus für kombinierte Probenvorbereitung und PCR-Ansatz. Zubehör: Optional sind Kühlblöcke für PCR-Platten erhältlich, um temperaturempfindliche Reagenzien optimal zu schützen. Anwendungsbereiche Laut Hamilton und Roche ist das System für vielfältige genomische Anwendungen einsetzbar, darunter: - Genexpressionsanalyse - Genotypisierung - Sequenzierung - Erregernachweis (z. B. bei SARS-CoV-2-Tests) - Klinische Diagnostik Technische Daten Spannungsversorgung: 115 V AC bis 230 V AC (+/-10 %) Frequenz: 50/60 Hz (+/- 5 %) Leistungsaufnahme: 600 VA Abmessungen: 112,4 × 90,3 × 100,6 cm (B × H × T), Tiefe ohne automatische Beladung 79,5 cm Gewicht: 180 kg Finanzierung über unsere Partnerbank möglich. komplett-konzept.leasingo.de Viele weitere neue und gebrauchte Artikel finden Sie in unserem Shop. Internationaler Versand auf Anfrage möglich!

Leto izdelave: 2003, stanje: dober (rabljeno), Schatz Advanced vijačna linija Schatz vijačna linija Dolžina: 5450 mm Višina: 3000 mm Navijalni podstavek Dolžina: 5020 mm 2 x Demag dvigalo 1 x Liftket električna verižna dvigalka 1 x Schatz 907500 Sistem brez Advantech TPC-1260 TE Touch Panel PC Nodpfxoihiiio Ah Usct Možno je tudi financiranje preko naše banke. komplett-konzept.leasingo.de Na voljo so tudi druge vijačne linije različnih velikosti – nove in rabljene –

Stanje: zelo dobro (rabljeno), Epson G10-854SR Robot Assembly Station Dispensing Station The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 Assembly Area Heatsink + Front Wall Bracket, and 3.3 Assembly Area Front. (KK = Heatsink, SW = Front Wall Bracket) St.3.1: Dispensing Area - A workpiece carrier (WT) with mounted chassis and PCB enters the dispensing area via the transfer belt. - It is stopped at the lift-positioning unit (HuPo), lifted off the belt and fixed in place. - Next, the x-y-z handling system moves the dispensing head to the specified location and starts the dispensing process. - After successful dispensing, the handling system moves into the park position and the WT is set back onto the belt. - The carrier is then conveyed to the Assembly Area Heatsink + Front Wall Bracket (provided there is no WT in the placement position). St.3.2: Assembly Area Heatsink + Front Wall Bracket - A WT moves from the dispensing area into the Assembly Area Heatsink + Front Wall Bracket via the transfer belt. - It is stopped at the lift-positioning unit (HuPo), lifted off the belt, and fixed in place; at the same time, the chassis side walls of the partially assembled unit are aligned. - Simultaneously, the heatsink tray and front wall tray are positioned. Nedpfx Asibx S Neh Usct - A stack of 12 heatsink trays and a stack of 12 front wall bracket trays are manually placed onto the respective infeed belts outside the safety enclosure. - The two safety interlocks are opened and the loaded tray stacks move into the gripping position of each stacker. - The safety interlocks close again. - The corresponding grippers pick up the respective tray. - The tray is separated and transported upwards with the stacker z-axis to above the actual pick-up height. - To center and stabilize the tray, a centering support is pushed and positioned underneath each tray by the x-handling system. - With the stacker z-axis, each tray is set onto its corresponding centering support. - The trays are now ready for component removal. - Using the multi-gripper on the SCARA robot, the heatsink (KK) is gripped from the tray and placed in an intermediate alignment position (to compensate for pickup inaccuracies and ensure a repeatable gripping position for assembly). - The heatsink is scanned, picked up again, and if the scanner result is OK, it is assembled onto the WT. - If not OK, the heatsink is placed in an NOK box. - The SCARA robot multi-gripper then picks up the front wall bracket (SW) from the tray and places it in the alignment position. - The front wall bracket is picked up again and assembled onto the WT. - Proceed to Assembly Area Front. Technical Data Model: SCARA (4-axis robot) Payload: nominal 5 kg, max. 10 kg Horizontal reach: 850 mm Vertical reach: Axis 3: 420 mm Orientation range: J4: +/- 360° Horizontal repeatability: +/- 0.025 mm Vertical repeatability: J3: +/- 0.01 mm Orientation repeatability: J4: +/- 0.005° Max. operating range: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Max. operating speed: J1,J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Allowable moment of inertia: nom. 0.02 kg*m², max. 0.25 kg*m² User cabling electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-Axis: Ø outer: 25 mm Press-in force: 250 N Weight: 48 kg Controller: EPSON RC180 Mounting type: ceiling IP Protection class: IP20 Power and signal cables: 3m Financing through our bank is also possible. Complete offer at komplett-konzept.leasingo.de

Stanje: dober (rabljeno), WSM Stationary Screwdriving Unit Screwdriving Station Assembly of components for car radios and navigation systems, as well as testing these units. The assembly station is enclosed by a protective housing. The service doors are equipped with monitored locking switches (interlocks). During automatic operation, the doors are locked and can only be opened during an automatic stop or in manual mode after pressing the 'Door' button on the control panel. Automatic operation cannot be started when a door is open. Functional Sequence The station is loaded via the transfer conveyor with the pre-assembled module. Below is a description of the steps performed in the automatic station during the processing of one workpiece carrier (WT). In normal operation, all 3 stations run in parallel. - Positioning the WT with the pre-assembled module in station 2.1 - Lowering of the carrier with the scanner and vision sensor - Scanning the 3 codes (front panel, front PCB, SD PCB), cross-check with the database - Verifying correct latching of the FFC (flexible flat cable) in the connector - Raising the carrier and lowering the WT onto the conveyor belt Ncsdpoibichjfx Ah Uot - Positioning the WT with the pre-assembled module in station 2.2 - Positioning the screwdriver and fastening the front PCB - Lowering the WT onto the conveyor belt - Positioning the WT with the pre-assembled module in station 2.3 - Lowering the light protection hood and contacting, moving the carrier with the test sensors from below - Type-specific testing of the illumination of SD + CD slots and keys - Function test of the CD eject button - Lowering the WT onto the conveyor belt > continue If errors occur during testing, they are displayed on the screen and can be rectified if possible. To do this, switch to manual mode and open the doors. After repair and restarting automatic operation, the WT is checked again in the station. If repair is not possible (e.g., screwdriving error), the WT is marked as NIO (not OK) in the control system and is no longer processed. Manual NIO marking and discharge is also possible. Financing through our bank is also available. komplett-konzept.leasingo.de Additional new and used assembly stations—find them in our shop! International shipping costs on request!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Foam dosing station with foam mixer and applicator Nsdpfxeu D E A Do Ah Ujct The system operates similarly to the SUPRA MIX concept. Multiple chemicals are metered and mixed in a controlled ratio with water and air. Recipes are stored in the controller and can be changed during operation. Foam applicator with mixer • Dynamic foam mixer with online dosing of 5 products plus water • 5 dosing pumps • One direct inlet for the mixture • Product monitoring for chemicals • Air dosing valve • Dynamic foam mixer with adjustable speed • PLC control • Foam applicator • For single-piece carpets up to 1 m width Applications - Stain blockers - Dirt, water and oil repellents - Fluorocarbons - Antistatic agents - Softeners - Flame retardants - Antibacterial chemicals - Moth and beetle repellents - Pile stabilizers - Anti-shedding agents - Resins for wrinkle resistance and dimensional stability Specification Foam density: 20 - 100 g/l (higher density at lower flow rate) Dosing range: 0.5 - 500 g/l (1:100 with each pump) Foam throughput: 50 - 500 l/min Electrical data Connected load: 6 kVA, 10A Mains voltage: 400V / 50Hz Control voltage: 24V Dimensions: HxWxD = 1400 x 2100 x 860 mm Year of manufacture: 2007 Purchase price: €47,600 Financing through our bank is also available. komplett-konzept.leasingo.de Discover more items – new and used – in our shop! International shipping costs on request!

Stanje: zelo dobro (rabljeno), ZIM Hülsta Uređaj za podizanje i postavljanje korpusa Uređaj za podizanje korpusa služi za uspravljanje i daljnji transport montiranih korpusa. Uglavnom se koristi kod preša za korpuse s prolaznom funkcijom. Ncjdpfjvdb Ixex Ah Uet Olakšava rukovanje pri postavljanju velikih radnih komada. Transportni i montažni uređaj unutar linije za montažu korpusa. Iza prolazne preše za korpuse, prešani korpusi se pomoću ovog uređaja polažu na stražnju stranu. Tako se omogućuje montaža na donjoj strani. Proizvođač: ZIM Hülsta-Werke Tip: Uređaj za podizanje korpusa Dimenzije: Valjkasti transporter (D x Š x V): 2800 x 900 x 800 mm Širina valjka: 800 mm Nagibna površina (D x Š): 1000 x 900 mm Napajanje: 3x400 V AC Instalirana snaga: 2 kW Financiranje putem naše banke također je moguće. komplett-konzept.leasingo.de Više novih i rabljenih artikala pronađite u našoj trgovini! Međunarodni troškovi dostave na upit!

Stanje: dober (rabljeno), Leto izdelave: 2010, Horlemann HR10U-S Switchgear 12 kV HR 10U – the universal switchgear for industry and utilities Modular medium-voltage switchgear system for solar power distribution Switchgear details: Manufacturer: Horlemann Switching configuration: KKÜHTTT Model: HR10U-S Rated voltage: 12 kV Rated current: 630 A Short-circuit capacity: 20 kA/1s Nodpjnfu Dysfx Ah Usct Height: 2060 mm Width: 1300 mm Depth: 800 mm Cell width: 7 x 650 mm Busbar: AL 50 x 10 mm Weight: approx. 620 kg HR10U Rated Data: Ur: 12 kV Ir: 630 A Up: 75 kV Ik: 20 kA (1s) Ud: 28 kV Ip: 50 kA Fr: 50 Hz IAC: AFL 25 kA (1s) Degree of protection: IP4X According to IEC-62271-200 (VDE 0671-200); 2003-11 TMC Cast Resin Transformer: Design: Cast resin iPrimary voltage: 10 kV Secondary voltage: 400-230 V Connection: Dyn5 Year of manufacture: 2010 Height: 1740 mm Width: 1300 mm Depth: 900 mm Weight: 1.8 t The pressure relief of the switchgear is provided via a pressure relief chamber in the lower section of the switchgear panel. Documentation: Test report Wiring diagram Financing is also available through our bank. komplett-konzept.leasingo.de You will find more new and used items in our shop! International shipping costs on request!

Stanje: dober (rabljeno), Leto izdelave: 2014, Tecna 3484 Universal Spot Welding Unit 8 kVA Universal welding station 8 kVA with hand-operated gun, dual program. Simultaneous connection of two tools with automatic retrieval of the corresponding welding program, which saves time and prevents errors for a simple and safe workflow. Bodywork repairs: resistance spot welding of sheet metal, straightening with dent puller (nails and washers), localized heating (carbon electrode), screw and rivet welding, dent removal from stainless steel sheets. Synchronous SCR welding control, adjustment of welding time in cycles and pulses, welding current setting, and compensation function. Power supply: 400V Mains frequency: 50 / 60 Hz Fuse: 25 A Rated power at 50% duty cycle: 8 kVA Maximum welding power: 35 kVA Maximum secondary current: 6.4 kA Thermal current 100%: 0.88 kA Year of manufacture: 2014 Weight: 85 kg Financing through our bank is possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! Nsdol Smn Sepfx Ah Usct International shipping costs on request!

Stanje: dober (rabljeno), Roche MagNA Pure LC Nucleic Acid Preparation Station Manufacturer’s description, all information without guarantee. Features - Save time with rapid, fully automated isolation of high-quality DNA, RNA, and mRNA. - Achieve reliable, reproducible results. - Benefit from high flexibility regarding sample type and volume, as well as elution volume and post-elution processes. - Enjoy software-assisted setup of reagents and consumables. - Automated pipetting of PCRs into LightCycler® capillaries (LightCycler® sample carousel), LightCycler® 480 multiwell plates (96-well), PCR plates, strips, or tubes. Product Description The MagNA Pure LC instrument is a benchtop device designed for the rapid, cross-contamination-free preparation of nucleic acids and PCR setup. A fully enclosed housing, automatic clot and tip loss detection, as well as sample tracking, make the MagNA Pure LC instrument a true “walk-away” solution. Filtration, centrifugation, and other manual steps are completely eliminated. No vacuum pumps or tubing are required. The piston-driven 8-channel nozzle head and direct-displacement liquid handling minimize the risk of cross-contamination to an absolute minimum. UV decontamination and the HEPA filter system provide maximum safety for samples and the environment. Condition: used, untested Nodpfx Ajh Dpxhoh Usct Scope of delivery as shown Financing through our partner bank is also possible. komplett-konzept.leasingo.de You will find more items – both new and used – in our shop! International shipping costs available upon request!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Ponujamo pipetirno postajo s pipetami v brezhibnem stanju. Pipetirna postaja CyBi-FeliX s CHOICE Head, 8-kanalni Choice adapter 10-1000uL in 0,5-50uL. Leto izdelave: 2021. Znamka: Analytik Jena. Model: Cybio Felix Choice. Osebni prevzem v Olsztynu (Poljska, Poland). Nodsumtkaspfx Ah Uect

Leto izdelave: 2017, stanje: rabljeno, Setup station, pallet changing system, pallet changer, pallet storage, tool changer chain, chain magazine, tool changing system, tool magazine - Setup station with: Garant ZERO CLAMP G-11886 Nodpfxoflk Hpj Ah Usct - Manufacturer no.: 101545300002672 - 21063 1721559 - Dimensions: 400/400/H810 mm - Weight: 232 kg

Stanje: rabljeno, Ventilation duct, ventilation flap, ventilation system, filtration unit, chip extraction, dust extraction, extraction system, ventilation ducts and fittings - Outer frame made of: galvanized sheet steel Ncodpfx Ahofccuzj Ujt - Dimensions: 2510/1910/H205 mm - Weight: 120 kg

Stanje: rabljeno, Fieldbus, Profibus, PLC control, automation technology, controllers and regulators, bus coupler, logic bus terminal, input terminal - Manufacturer: Beckhoff, 4-channel digital input terminal - Model: KL1904 - Rated voltage: 24 V DC - Quantity: 5 terminals available Nodpfshu Ddzox Ah Ujct - Price: per piece - Dimensions: 67/15/H100 mm - Weight: 0.1 kg/unit

Stanje: rabljeno, Telephone System Aerospace, Wireless Network - Manufacturer: Cisco, Aironet BR1310 Njdpjfm T E Njfx Ah Uoct - Model: AIR-BR1310G-E-K9-R - Dimensions: 205/205/H80 mm - Weight: 1.1 kg

Stanje: rabljeno, Ventilation duct, ventilation flap, ventilation system, filtration system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, louvered damper, backdraft damper, louvered ventilator Njdpfx Aheharupj Usct - Ventilation flap: louvered ventilator, louvered damper - Ventilation flaps: mechanically adjustable, without actuator - Opening (6 louvers): 1170 x 510 mm - Overall dimensions: 1325/560/H115 mm - Weight: 21 kg

Stanje: rabljeno, Transfer station, stop table, feed unit - The stop is actuated via a trapezoidal thread spindle Nodpfx Aec Rzk Roh Usct - Spindle stroke: 850 mm - Design: robust - Drive motor: 0.37 kW - Speed: 250 rpm - Number: 1x station available - Price: per unit - Dimensions: 1825/500/H920 mm - Weight: 138 kg

Stanje: rabljeno, corner transfer unit, roller conveyor, roller track, powered roller conveyor, roller conveyor, roller track with strip feeder, transfer station -Manufacturer: Grenzebach, transfer station roller conveyor type WRS -Drive: SEW-Eurodrive 0.18 kW 1380/88 rpm / 0.18 kW 71 rpm -Intermediate dimension: 1500 mm Ncedpotrhmqefx Ah Uot -Conveying length: 1250 mm -Axle spacing: 250 mm -Roller pitch: 250 mm -Rollers: rubber-coated -Lifting: pneumatic -Belt conveyor length: 1400 mm / belt spacing 2x 480 mm -Quantity: 1x transfer station available -Transport dimensions: 1740/1550/H680 mm -Weight: 410 kg

Leto izdelave: 2009, stanje: rabljeno, right-angle transfer, roller conveyor, roller track, driven roller conveyor, roller conveyor, roller track with strip feeder, transfer station - Manufacturer: Grenzebach, transfer station roller conveyor type WRS Nedpfx Astrhncoh Usct - Drive: SEW-Eurodrive 0.18 kW 1380/88 rpm / 0.18 kW 71 rpm - Intermediate dimension: 1500 mm - Conveyor length: 1250 mm - Axle spacing: 250 mm - Roller spacing: 250 mm - Rollers: rubber-coated - Lifting: pneumatic - Belt conveyor length: 1400 mm / belt spacing 2x 480 mm - Quantity: 3x transfer stations available - Price: per unit - Transport dimensions: 1700/1500/H1040 mm - Weight: 412 kg

Leto izdelave: 1986, stanje: rabljeno, Turning station, turntable, rotation station, rotary table, conveyor system, roller conveyor -for: edge banding machine, edge banding system, edge bander -Turning station: for rotating workpieces -Roller conveyor: wide model Nodpfxeb R Adcj Ah Usct -Roller width: 2900 mm -Roller conveyor length: 1500 mm -Rotary head roller: rubber-coated -Other roller conveyors available at extra cost -Transport dimensions: 1500/3850/H1950 mm -Weight: 969 kg

Stanje: rabljeno, Extraction system, filtration unit, oil mist separator, oil mist separator, air filter, mist separator, oil and emulsion mist separator - Ventilation flap: Louvered vent, jalousie damper - Type: 9 adjustable louvers - Material: Aluminum - Overall dimensions: 445/100/H330 mm Ncjdpfoi Exqmox Ah Uot - Weight: 2.6 kg