Popolnoma Avtomatska Žaga Za Optimizacijo 4,5 M nakup rabljenega (118.741)

Stanje: novo, Krožna žaga Profilma 502, reprezentativna za raznoliko serijo »Profilma« idealna za proizvodnjo oken in fasad, avtomobilsko industrijo, strojno in opremijsko industrijo, fotovoltaiko/solarne sisteme itd. • za aluminijaste in plastične profile • popolnoma avtomatizirano upravljanje • krmilnik Siemens S7 z zaslonom na dotik, vključno s števcem izdelkov • diagnostika napak, vključno z usmerjevalnikom IXON za VPN-povezavo • množitelj količin za uporabo svežnjev materiala • prikaz časa cikla v sekundah • za uporabo žagastih listov premera Ø 550 mm • pogon 7,5 kW, S6, 400 V, 50 Hz, 2.850 vrt/min • motorizirano podajanje žage, rezanje žage od spodaj • razširitev rezalne plošče na obeh straneh žagastega lista • enota za podajanje materiala s krogličnim vijačnim mehanizmom in servomotorjem • dolžina podajanja: 3–800 mm • drsna sani z dvižno in spuščeno podporno valjčno • povratna naprava do dolžine segmenta največ 4,0 m • samodejni izklop prek končnega stikala ob koncu žaganega materiala Nodpjzlr Rcofx Altjwi • ostanki od 75 mm (odvisno od profila) Osnovni stroj je na voljo tudi kot avtomat za žaganje, vrtanje in navojno rezanje ali kot avtomat za žaganje in izsekovanje. S hitrostjo in učinkovitostjo ter natančnostjo in visokim številom izdelkov boste hitro in učinkovito izvedli naročila. Druge avtomatizirane krožne žage, tudi za večje dimenzije profilov ali drage materiale, so na voljo v preizkušenem standardnem programu Pressta-Eisele. Na podlagi vaših specifikacij obdelave vam z veseljem svetujemo!

Stanje: rabljeno, Column-guided semi-automatic bandsaw METORA - KALTENBACH Type HMB 380 DS for 90° cuts only (Made in Austria) Machine no. 4580028 Year of manufacture: approx. 1993 Cutting range round: Ø 380 mm Square: 380 x 380 mm Nodpfx Aodzqtgjltswi Saw blade dimensions: 5650 x 34 x 1.1 mm Blade speed: 25–108 m/min, stepless Material infeed height: 870 mm Hydraulic drive power: 1.5 kW Saw motor power: 4 kW Power supply: 400 Volt, 50 Hz - Fully hydraulic bandsaw with twin-column design - Hydraulic saw frame lowering with stepless cutting pressure adjustment - Steplessly adjustable lowering speed - Hydraulic vice clamping with hydraulic top bundle clamping - Hydraulic unit integrated into the machine base - Material feed roller on infeed side with gear motor (not mounted on machine frame) - Coolant system with coolant pump for water-emulsion - Minimum quantity lubrication for the saw blade - Electric heating cartridge for coolant and hydraulics - Length stop TRENNJAGER Type EX-Stop1, with handwheel adjustment, digital display and hydraulic stop carriage clamping Stop total length: 6750 mm, stop travel: 5650 mm, stop arm hydraulically foldable Without roller conveyor Floor space required (L x W x H): 2800 x 1400 x 2450 mm Weight of machine: approx. 3 t Weight of stop system: approx. 800 kg In good condition

Stanje: novo, Leto izdelave: 2026, Aluminum Circular Saw UK 600 HA 90°, Semi-automatic The semi-automatic circular saw UK 600 HA 90° is an upcut machine, primarily used for cutting profile material made of cast aluminum, copper, and hard plastics (solid material only to a limited extent). The machine stands out for its simple operation and quick, convenient material changes. Please note that only 90° cuts are possible with this machine! The saw feed is automatic via push button. Material clamping is done by two pneumatically operated vertical and two horizontal clamping cylinders. The standard equipment includes a minimum quantity lubrication system and an air spray gun for cleaning the machine! Ports for a chip extraction system are provided. In addition, the machine can optionally be equipped with a digital mitre angle display, a marking laser, and a pneumatic system for lifting the safety hood. Equipment: - Large worktable, powerful drive motor - Two-button control for initiating the cutting process (optional single-button control available) - Clearly arranged control panel - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lift with oil level indicator - Fixed material support jaw can be moved backwards to increase cutting capacity - Large safety hood fully covers the working area - Minimum quantity lubrication system with 2-liter reservoir - Adjustable blade/feed rate - Air gun for cleaning the machine - Saw blade diameter: 600 mm Nwodpopa Nxdefx Altei Operation Sequence: 1. Set the cutting angle 2. Insert the material 3. Adjust the lifting speed 4. Bring the clamping cylinders up to 20 mm near the material 5. Clamp the material 6. Press the start button; the machine is ready for operation 7. Press and hold both SAW buttons; the material will be cut 8. At the end of the cycle, release both SAW buttons and press the STOP button 9. Open the clamp and remove or advance the material Technical data such as cutting range, output, etc. (see data sheet in email attachment). We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, Aluminum Circular Saw UK 650 HA, Semi-automatic The semi-automatic circular saw UK 650 HA is an upcut machine primarily used for cutting profile materials made of aluminum castings, copper, and hard plastics (solid material only to a limited extent). The machine is distinguished by its user-friendly operation, quick and convenient material changeover, and easy miter angle adjustment. The UK 650 HA features a continuously adjustable miter range to the left and right up to 20° (pivoting range twice 70°). The saw feed operates automatically at the press of a button, while material clamping is achieved via two pneumatically controlled vertical and two horizontal clamping cylinders. Standard equipment includes a minimum quantity lubrication system and an air gun for cleaning the machine! This machine is also fitted with connections for a chip extraction system. Furthermore, optional accessories include a digital miter angle display, a marking laser, and a pneumatic device for lifting the safety hood. Equipment: - Double miter 20° – 90° – 20°, large support table - High-performance main drive motor - Two-button control for initiating the sawing cycle (optional one-button control available) - Clearly arranged control panel - Adjustable blade/feed rate - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lifting with oil level indicator - Fixed material fence can be repositioned to the rear to increase cutting capacity - Large safety hood covering the entire work area - Minimum quantity lubrication system with 2-liter reservoir - Air gun for cleaning the machine - Saw blade ø 650 mm Operating Procedure: 1. Set the cutting angle 2. Insert the material 3. Adjust the lift speed 4. Bring the clamping cylinders to within 20 mm of the material 5. Clamp the material 6. By pressing the start button, the machine is ready for operation. 7. Press and hold both SAW buttons; the material will be cut. 8. Upon cycle completion, release both SAW buttons and press the STOP button 9. Open the clamping vise and remove or advance the material You are welcome to visit and view the desired system in our manufacturing/demo hall at any time. Please feel free to contact us regarding this matter. Nwedpsidun Dsfx Altsi We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK 352 HA is an “upcut” machine, predominantly used for cutting profile materials made from cast aluminum, copper, and hard plastics (limited suitability for solid material). The machine is characterized by its user-friendly operation, quick and convenient material changes, and easy miter adjustment. The UK 352 HA features a stepless miter range adjustable from left up to 45° and right up to 0°. Saw feed is automatic at the press of a button, while material clamping is provided by two pneumatically operated vertical clamping cylinders. Standard equipment includes a minimum-quantity lubrication system and an air spray gun for machine cleaning! Connections for a chip extraction system are provided as standard. Equipment • Precision under-table circular saw Nedogwt Rrspfx Altjwi • Miter adjustment: left 45º / 90º / right -45º • Includes 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Chip extraction device • Mist lubrication system for air-oil cooling • Air gun with spiral hose • Includes maintenance unit with pressure reducer • Ergonomically arranged control panel • Max. cutting height: 125 mm • Saw blade: 350 mm • Saw blade not included in the scope of delivery! You are welcome to inspect the desired machine in our production/demonstration hall at any time. Please do not hesitate to contact us. We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK-400-A is an “upcut” machine, primarily used for cutting profiles made of cast aluminum, copper, and hard plastics (solid material to a limited extent). The machine is characterized by its intuitive operation, quick and convenient material changes, and easy mitre angle adjustment. The UK-400 A features a continuously adjustable mitre range to the left and right up to 20° (swivel range two times 70°). The saw feed is automatic and activated by pressing a button, while the material is secured by two pneumatically operated vertical and horizontal clamping cylinders each. The standard configuration for this machine includes a minimum quantity lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are provided. Additionally, this machine can optionally be equipped with a digital mitre angle display, a marking laser, and a pneumatic device for lifting the protective hood! Equipment • Precision under-table circular saw • Continuously adjustable mitre angles: 0º/45º/90º/-45º/-60º • including 2 pneumatic clamps (vertical) • Infinitely variable saw blade feed • Two-hand safety operation • Adjustable rear material stop • Chip extraction device for chip extraction system • Mist spraying unit for air-oil cooling • Air gun with spiral hose • Including maintenance unit with pressure regulator • Ergonomically arranged control panel • Max. cutting height: 130 mm • Saw blade: 400 mm • Saw blade not included! You are welcome to inspect the desired unit at any time in our production/showroom facility. Please feel free to contact us. Nwodpfxegwt Rnj Altei We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK 352 HA is an “upcut” machine, predominantly used for separating profile materials made of cast aluminum, copper, and hard plastics (to a limited extent, solid materials). The machine is distinguished by its user-friendly operation, rapid and convenient material change capability, and easy mitre angle adjustment. The UK 352 HA offers a continuously adjustable mitre range of up to 45° to the left and 0° to the right. The saw feed is automatically driven at the push of a button, and material clamping is performed by two pneumatically operated vertical clamping cylinders. As standard, this machine comes equipped with a minimum quantity lubrication system and an air spray gun for cleaning the machine. The machine is prepared for connection to a chip extraction system. Features • Precision under-table circular saw • Mitre adjustment: left 45°, 90°, right -45° • Includes 2 pneumatic vertical clamps • Infinitely adjustable saw blade feed • Two-hand safety control system • Adjustable rear material stop • Extraction system for chip extraction unit Nwedpfegwt Rysx Altji • Mist spray system for air-oil cooling • Air gun with spiral hose • Maintenance unit with pressure regulator included • Ergonomically arranged control panel • Max. cutting height 125 mm • Saw blade Ø 350 mm • Saw blade not included! We look forward to hearing from you! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, pritisk: 6 letvica, The semi-automatic circular saw UK-600-A is an “upcut” machine, primarily used for cutting profile materials made of aluminum casting, copper, and hard plastics (to a limited extent, also solid material). This machine is characterized by its ease of operation, quick and convenient material change, and straightforward miter angle adjustment. The UK-600 A features a continuously adjustable miter range of up to 20° to the left and right (swivel range of two times 70°). Saw feed is automatic at the push of a button, while material clamping is performed by two pneumatically controlled vertical and horizontal clamping cylinders each. As standard, this machine comes equipped with a minimum quantity lubrication system and an air blow gun for machine cleaning. Connections for a chip extraction system are also provided. Additionally, this machine can optionally be equipped with a digital miter angle display, a line laser, and pneumatic hood lifting. Features: • Precision underfloor circular saw Nedpfxsgcbwgj Altswi • Stepless miter adjustment 0º/ 45º/ 90º/ -45º / -60º • Includes 2 pneumatic clamps (vertical) • Continuously adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Extraction system—chip extraction connection • Mist spray device for air-oil cooling • Air gun with coiled hose • Includes maintenance unit with pressure regulator • Ergonomically arranged control panel • Maximum cutting height 230 mm • Saw blade 600 mm • Saw blade not included! You are welcome to view the desired unit at any time in our production/showroom. Please contact us for an appointment. We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK 500 HA is an “upcut” machine, predominantly used for cutting profile materials made of aluminum cast, copper, and hard plastics (suitable for solid material to a certain extent). The machine stands out for its ease of use, fast and convenient material change, and simple mitre angle adjustment. The UK 500 HA offers a continuously adjustable mitre range from 30° to the left up to 0° to the right. The saw feed is automatically operated by pressing a button, while material clamping is achieved with two pneumatically controlled vertical and horizontal clamping cylinders each. The standard configuration of this machine includes a minimal lubrication system and an air blow gun for cleaning the machine! Connections for a chip extraction system are provided on this machine. Features • Precision underfloor circular saw • Continuously adjustable mitre adjustment at 0º/ 45º/ 90º/ -45º / -60º • Includes 2 pneumatic clamps (vertical) • Saw blade feed continuously adjustable • Two-hand safety control • Adjustable rear material stop • Chip extraction device for suction unit • Air-oil mist lubrication unit Nwsdpogwt R Dofx Altsi • Air gun with spiral hose • Includes maintenance unit with pressure regulator • Ergonomically arranged control panel • Max. cutting height 180 mm • Saw blade 500 mm • Saw blade not included in delivery! You are welcome to inspect the desired machine at any time in our manufacturing/demonstration hall. Please feel free to contact us. We look forward to hearing from you! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, Aluminum Circular Saw BC 450 HA, Semi-automatic (MG FRONT-450) The BC 450 HA is a double miter saw with a swiveling range of 45° to the left and 22.5° to the right and automatic miter adjustment via stop functions. The saw feed operates automatically, and the material is clamped pneumatically. The saw blade (450 x 30 mm) operates horizontally. Additionally, this machine can optionally be equipped with a digital miter angle display, a marking laser, and a pneumatic safety guard lifting system! Features - Double miter saw with a powerful drive motor - Two-button control for triggering the sawing cycle (optionally also available as a single-button control) - Large miter range from -22.5° to +45°, swivel range 67.5° – 0° – 45° - Automatic miter adjustment, fixed stop functions at -45° / 90° / +45°, plus two variable stop functions adjustable to the desired angle! - Two horizontal pneumatic clamping cylinders - Clear and accessible control panel - Large safety guard covering the entire working area, lifted pneumatically - Adjustable blade feed rate - Connections for extraction system - Minimum quantity lubrication system - Air gun for machine cleaning - Saw blade diameter 450 mm Operating Process 1. Set the cutting angle 2. Insert the material 3. Adjust the feed rate 4. Move the clamping cylinders to within 20 mm of the material 5. Clamp the material 6. The machine is ready for operation by pressing the start button 7. Press and hold both SAW buttons to cut the material 8. Upon completion of the cycle, release both SAW buttons and press the STOP button 9. Open the clamping device and remove or advance the material Nwodpopa Nxaefx Altoi Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, Aluminium Circular Saw UK 800 HA, Semi-Automatic The semi-automatic circular saw UK 800 HA is an upcut machine, primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (limited suitability for solid materials). The machine is characterized by its easy operation, quick and convenient material change, and simple mitre angle adjustment. The UK 800 HA offers a continuously adjustable mitre range to the left and right up to 20° (swivel range of two times 70°). The saw feed is actuated automatically at the press of a button; material clamping is provided by two pneumatically controlled vertical and two horizontal clamping cylinders. A minimum quantity lubrication system and an air blow gun for machine cleaning come as standard equipment! The machine is also equipped with connections for a chip extraction system. Additionally, optional features include a digital mitre angle display, a laser marking system, and pneumatic lifting for the safety hood. Nedpfjidun Ijx Altjwi Equipment - Double mitre 20° – 90° – 20°, large support table - High-performance drive motor - Two-button control for saw activation (optional one-button control available) - Clear control panel - Adjustable blade feed rate - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lift with oil level indicator - Fixed material stop can be moved backward to increase cutting capacity - Large safety hood covering the entire work area - Minimum quantity lubrication system with 2-liter reservoir - Air gun for cleaning the machine - Saw blade diameter: 800 mm Workflow 1. Set the cutting angle 2. Insert the material 3. Adjust the lifting speed 4. Move the clamping cylinders up to 20 mm from the material 5. Clamp the material 6. Press the START button to ready the machine 7. Press and hold both SAWING buttons to initiate cutting 8. After the cycle, release both SAWING buttons and press the STOP button 9. Open the clamping vice and remove or advance the material You are welcome to inspect the desired equipment at any time in our production/showroom. Please feel free to contact us for an appointment. Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK 352 HA is an "upcut" machine, primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (solid material possible to a limited extent). The machine stands out due to its user-friendly operation, quick and convenient material change, as well as easy mitre angle adjustment. The UK 352 HA offers an infinitely adjustable mitre range from 45° left to 0° right. Saw feed is automatic at the press of a button, and material clamping is provided by two pneumatically operated vertical clamping cylinders. As standard, the machine comes equipped with a minimum-quantity lubrication system and an air blow gun for machine cleaning! Connections for a chip extraction system are also available on this machine. Equipment • Precision under-table circular saw • Mitre adjustment: 45º left / 90º / 45º right • Incl. 2 pneumatic clamps (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable rear material stop • Chip extraction device interface • Mist spraying system for air-oil cooling • Air gun with spiral hose • Incl. maintenance unit with pressure regulator • Ergonomically arranged control panel • Max. cutting height: 125 mm • Saw blade: 350 mm • Saw blade not included! You are welcome to view the desired machine at any time in our production/showroom. Nwsdpfx Alegwt Rvjtji Please feel free to contact us. Plantec Maschinen GmbH

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6153102135, Usada sierra de cinta de marco giratorio semiautomática, KASTOmicut U2.6, año de fabricación: 2023, número de serie: 6153102135, en excelente estado, con muy poco uso. Se entrega con el rodillo que aparece en las fotos. Sierra de cinta universal semiautomática de construcción muy robusta, diseñada para un uso intensivo en talleres y capaz de realizar cualquier tarea de corte a medida o cortes en inglete (-45°/+60°) en tubos, perfiles y material macizo. La velocidad de corte y el avance hidráulico totalmente regulables de forma continua permiten cortes sensibles y prolongan la vida útil de la hoja. Datos técnicos: - Capacidad de corte a 90° redondo: 260 mm - Capacidad de corte a 90° plano (ancho x alto): 310 x 260 mm - Dimensiones (L x A): 760 x 1620 mm - Altura (cabezal bajado): 1690 mm - Altura (cabezal elevado): 2040 mm - Altura de soporte de material: 950 mm - Peso total: 510 kg Nodjvyl Dvepfx Altowi Características de rendimiento: - Potencia total: 2,0 kW - Motor sierra, potencia con regulación de frecuencia: 1,5 kW - Velocidad de corte infinitamente variable, control por frecuencia: 20 – 110 m/min - Dimensiones de la hoja de sierra: 3180 x 27 x 0,9 mm - Guías de hoja: rodillos laterales guiados y cojinetes traseros, intercambiables - Sujeción del material: mecánica - Avance de corte: hidráulico, regulable sin escalonamientos - Tensión de la hoja: mecánica - Limpieza de la hoja: con cepillo sincronizado, fácil de intercambiar - Equipamiento eléctrico según DIN EN 60204. Tensión de alimentación: 440 V, 60 Hz. Tensión de control: 24 V Ciclo de trabajo (semiautomático): - Control del avance totalmente hidráulico y regulable sin escalonamientos - Mesa giratoria como soporte de material - Mordaza horizontal de ajuste rápido y carrera corta hidráulica - Velocidad de corte variable 20 – 110 m/min por accionamiento regulado por frecuencia - Sistema de refrigeración con dos boquillas - Parada automática tras el corte y retorno del cabezal unos 100 mm - Ajuste de inglete variable (-45° a +60°) - Regulación continua del brazo de la sierra - Protección eléctrica de las cubiertas de la hoja (normativa de prevención de accidentes) - Cepillo sincronizado para eliminación de virutas - Anclajes de fijación incluidos - Hoja bimetálica de 4 – 6 dientes por pulgada - Manual de instrucciones conforme a la Directiva de Máquinas de la UE y EN 82079 Precio: 15.428 euros + IVA, negociable, FCA Oradea/Rumanía Sujeto a errores, modificaciones y venta previa. Hablamos español / We speak English / Wir sprechen Deutsch / Beszélünk magyarul / Nous parlons français / Vorbim romana

Stanje: dober (rabljeno), Fully automatic with mitre cutting, Nwedpetqdvgsfx Altoi Max. diameter or cutting width 180 mm, Minimum dimension to be cut D 10 mm, Automatic feed single 600 mm, Max. feed length multiple 1800 mm, Minimum remnant length for single cut 20 mm, Minimum remnant length in automatic mode 110 mm, Table rotation range for mitre cut 135 degrees, Total drive power 3.2 kW, Weight without roller conveyors 1100 kg, Coolant system, The saw is still connected to power, Operating video available, Operating manual with circuit diagrams and spare parts lists.

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: EAN0729389556525, nosilnost na odsek shranjevanja: 3.000 kg, skupna dolžina: 44.800 mm, skupna višina: 4.500 mm, višina police: 4.500 mm, dolžina opore: 3.600 mm, dolžina police: 44.800 mm, višina okvirja: 4.500 mm, obremenitev na par nosilcev (maks.): 3.000 kg, širina okvirja: 1.100 mm, število vrst polic: 4, prosta razpetina: 3.600 mm, razmak između stupova: 3.600 mm, 4 vrste regalov za palete (M45113615-3) dolžina 11,3 m, višina 4,5 m, globina 1,1 m, 3 polja, širina 3,6 m, 3 nivoji nosilcev, nosilnost 3000 kg. - 16 okvirjev (RM4511 - RAL5019) - 32 podstavnih plošč, podložni material, vijaki - 64 talnih sidrnih elementov (ZZBA1210) - 72 posameznih nosilcev, dolžina 3,6 m (T3615 - RAL2008) - 4 oznake nosilnosti (BSMcP) Okvirji so priviti, niso vnaprej sestavljeni. Nsdpozp Dv Ejfx Altowi Prevoz/dostava: - največ 20 delovnih dni po prejemu plačila - dostava do gradbišča/mest montaže - raztovarjanje z tovornjaka opravi kupec z lastno dvižno napravo - dostave se izvajajo na celotno ozemlje Zvezne republike Nemčije; razen na otoke! Dostave v države EU se izvajajo po predhodnem dogovoru.

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: EAN0729389556525, nosilnost na odsek shranjevanja: 3.000 kg, skupna dolžina: 44.800 mm, skupna višina: 4.500 mm, razmak između stupova: 3.600 mm, višina police: 4.500 mm, število vrst polic: 4, prosta razpetina: 3.600 mm, višina okvirja: 4.500 mm, širina okvirja: 1.100 mm, obremenitev na par nosilcev (maks.): 3.000 kg, dolžina police: 44.800 mm, dolžina opore: 3.600 mm, 4 vrste regalov za palete (M45113615-3) dolžina 11,3 m, višina 4,5 m, globina 1,1 m, 3 polja, širina 3,6 m, 3 nivoji nosilcev, nosilnost 3000 kg. - 16 okvirjev (RM4511 - RAL5019) - 32 podstavnih plošč, podložni material, vijaki - 64 talnih sidrnih elementov (ZZBA1210) - 72 posameznih nosilcev, dolžina 3,6 m (T3615 - RAL2008) - 4 oznake nosilnosti (BSMcP) Okvirji so priviti, niso vnaprej sestavljeni. Prevoz/dostava: - največ 20 delovnih dni po prejemu plačila - dostava do gradbišča/mest montaže Nwjdpfx Alszpfa Setei - raztovarjanje z tovornjaka opravi kupec z lastno dvižno napravo - dostave se izvajajo na celotno ozemlje Zvezne republike Nemčije; razen na otoke! Dostave v države EU se izvajajo po predhodnem dogovoru.

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: EAN0729389556525, nosilnost na odsek shranjevanja: 3.000 kg, skupna dolžina: 22.400 mm, skupna višina: 4.500 mm, razmak između stupova: 3.600 mm, višina police: 4.500 mm, število vrst polic: 2, višina okvirja: 4.500 mm, širina okvirja: 1.100 mm, obremenitev na par nosilcev (maks.): 3.000 kg, dolžina police: 22.400 mm, dolžina opore: 3.600 mm, 2 vrsti regalov za palete (M45113615-3) vsaka dolžina 11,2 m, višina 4,5 m, globina 1,1 m, vsaka 3 polja, širina 3,6 m, vsaka 3 nivoji prečk, nosilnost police 3000 kg. - 8 okvirjev (RM4511 - RAL5019) - 16 talnih plošč, podporni material, vijačni material - 16 talnih sider (ZZBA1210) Nwjdpfjzl N Apjx Altoi - 36 posameznih prečk (T3615 - RAL2008) - 2 oznaki za nosilnost (BSMcP) Okvirji so vijačeni, niso predmontirani Prevoz / dostava: - najkasneje 20 delovnih dni po prejemu plačila - dostava do gradbišča / montažne lokacije - raztovarjanje s tovornjaka opravi kupec z lastnim dvižnim strojem - Dostave po celotnem ozemlju Zvezne republike Nemčije, razen otokov! Dostave v države EU po individualnem dogovoru.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, nosilnost na odsek shranjevanja: 1.500 kg, skupna dolžina: 34.000 mm, skupna višina: 4.500 mm, višina police: 4.500 mm, število vrst polic: 3, nosilnost: 13.500 kg, prostor za palete: 117 evropske palete, višina okvirja: 4.500 mm, širina okvirja: 1.100 mm, obremenitev na par nosilcev (maks.): 4.500 kg, dolžina police: 34.000 mm, dolžina opore: 2.700 mm, TEŽKO (IZJEMNO TEŽKO) NOSILNI REGALI 3 vrste paletnih regalov vsaka 11,3 m dolžine, 4,5 m višine, 1,1 m globine, vsaka ima 4 polja, 2,7 m širine, nosilnost police 4500 kg! nosilnost polja 13500 kg! - 15 okvirjev (RH4511) RAL5019 - 30 talnih plošč, podložni material, vijačni material - 60 talnih sider (ZZBA1210) - 54 posameznih prečk (T27155!) RAL2008 - 3 table z nosilnostjo (BSMcP) Okvirji so privijačeni, niso predhodno sestavljeni Prevoz / Dostava: - največ 26 delovnih dni po prejemu plačila - brezplačna dostava na gradbišče / mesto montaže - razkladanje iz tovornjaka je v pristojnosti kupca z lastno dvižno napravo. - Dostave po celotnem ozemlju Zvezne republike Nemčije, razen otokov! Nwedpszkb Hdjfx Altji - Dostava v države EU po individualnem dogovoru.

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: EAN0729389556525, nosilnost na odsek shranjevanja: 3.000 kg, skupna dolžina: 44.800 mm, skupna višina: 4.500 mm, razmak između stupova: 3.600 mm, višina police: 4.500 mm, število vrst polic: 4, prosta razpetina: 3.600 mm, višina okvirja: 4.500 mm, širina okvirja: 1.100 mm, obremenitev na par nosilcev (maks.): 3.000 kg, dolžina police: 44.800 mm, dolžina opore: 3.600 mm, 4 vrste regalov za palete (M45113615-3) Vsaka: 11,2 m dolžine, 4,5 m višine, 1,1 m globine, po 3 polja, širina polja 3,6 m, po 3 nivoji prečk, nosilnost na polje 3000 kg. - 16 okvirjev (RM4511 – RAL5019) - 32 osnovnih plošč, podložni material, pritrdilni material - 64 talnih sider (ZZBA1210) - 72 posameznih prečk dolžine 3,6 m (T3615 – RAL2008) - 4 tablice s podatki o nosilnosti (BSMcP) Okvirji so vijačeni, niso predhodno sestavljeni. Prevoz / Dostava: - največ 20 delovnih dni po prejemu plačila - dostava brezplačno na gradbišče / mesto montaže - razkladanje iz tovornjaka izvede kupec z lastno dvižno napravo Nedpjzg Am Defx Altjwi - Dostave po celotnem območju Zvezne republike Nemčije, razen otokov! Dostave v države EU po individualnem dogovoru.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, nosilnost na odsek shranjevanja: 3.000 kg, skupna dolžina: 34.000 mm, skupna višina: 4.500 mm, višina police: 4.500 mm, število vrst polic: 4, prostor za palete: 108 evropske palete, višina okvirja: 4.500 mm, širina okvirja: 1.100 mm, obremenitev na par nosilcev (maks.): 3.000 kg, dolžina police: 8.500 mm, dolžina opore: 2.700 mm, 4 vrste paletnih regalov (4 x M45112711-2) v vsaki dolžina 8,5 m, višina 4,5 m, globina 1,1 m, v vsaki 3 polja, širina 2,7 m, Nodpfx Aezf Dgvsltewi v vsaki 2 prečni nivoji, nosilnost police 3000 kg. - 16 okvirjev (RM4511 - RAL5019) - 32 osnovnih plošč, podložni material, pritrdilni material - 64 talnih sider (ZZBA1210) - 48 posameznih prečk (T27114 - RAL2008) - 4 tablice o nosilnosti (BSMcP) Okvirji so vijačeni, niso predmontirani. Prevoz / dostava: - največ 20 delovnih dni po prejemu plačila - dostava na gradbišče / mesto montaže - razkladanje iz tovornjaka opravi kupec z lastno dvižno opremo. - dostave po celotnem območju Nemčije, razen otokov! - dobava v države EU po individualnem dogovoru.

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: EAN0729389556525, nosilnost na odsek shranjevanja: 3.000 kg, skupna dolžina: 22.400 mm, skupna višina: 4.500 mm, razmak između stupova: 3.600 mm, višina police: 4.500 mm, število vrst polic: 2, višina okvirja: 4.500 mm, širina okvirja: 1.100 mm, obremenitev na par nosilcev (maks.): 3.000 kg, dolžina police: 22.400 mm, dolžina opore: 3.600 mm, 2 vrsti regalov za palete (M45113615-3) vsaka dolžina 11,2 m, višina 4,5 m, globina 1,1 m, vsaka 3 polja, širina 3,6 m, Njdpjzdcwrsfx Altewi vsaka 3 nivoji prečk, nosilnost police 3000 kg. - 8 okvirjev (RM4511 - RAL5019) - 16 talnih plošč, podporni material, vijačni material - 16 talnih sider (ZZBA1210) - 36 posameznih prečk (T3615 - RAL2008) - 2 oznaki za nosilnost (BSMcP) Okvirji so vijačeni, niso predmontirani Prevoz / dostava: - najkasneje 20 delovnih dni po prejemu plačila - dostava do gradbišča / montažne lokacije - raztovarjanje s tovornjaka opravi kupec z lastnim dvižnim strojem - Dostave po celotnem ozemlju Zvezne republike Nemčije, razen otokov! Dostave v države EU po individualnem dogovoru.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, nosilnost: 13.500 kg, nosilnost na odsek shranjevanja: 1.500 kg, skupna dolžina: 34.000 mm, skupna višina: 4.500 mm, obremenitev na par nosilcev (maks.): 4.500 kg, število vrst polic: 3, višina okvirja: 4.500 mm, prostor za palete: 117 evropske palete, širina okvirja: 1.100 mm, višina police: 4.500 mm, dolžina police: 34.000 mm, dolžina opore: 2.700 mm, TEŽKO (IZJEMNO TEŽKO) NOSILNI REGALI 3 vrste paletnih regalov vsaka 11,3 m dolžine, 4,5 m višine, 1,1 m globine, vsaka ima 4 polja, 2,7 m širine, nosilnost police 4500 kg! nosilnost polja 13500 kg! - 15 okvirjev (RH4511) RAL5019 - 30 talnih plošč, podložni material, vijačni material - 60 talnih sider (ZZBA1210) - 54 posameznih prečk (T27155!) RAL2008 Njdpfxeyy Unis Altowi - 3 table z nosilnostjo (BSMcP) Okvirji so privijačeni, niso predhodno sestavljeni Prevoz / Dostava: - največ 26 delovnih dni po prejemu plačila - brezplačna dostava na gradbišče / mesto montaže - razkladanje iz tovornjaka je v pristojnosti kupca z lastno dvižno napravo. - Dostave po celotnem ozemlju Zvezne republike Nemčije, razen otokov! - Dostava v države EU po individualnem dogovoru.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, moč: 5,5 kW (7,48 KM), največja višina reza: 2.240 mm, premer žaginega lista: 303 mm, dolžina rezanja (maks.): 5.300 mm, globina reza: 800 mm, TEHNIČNE PODROBNOSTI Dolžina reza: 5.300 mm Višina reza: 2.100 / 2.240 mm Globina reza: 800 mm Premer žaginega lista: 303 mm Njdpfx Ajzktngsltswi Premer priključka za sesanje: 120 mm PODROBNOSTI O STROJU Moč motorja: 5,5 kW Skupna priključna moč: 5,5 kW Dimenzije in teža Potrebna površina: 6.300 mm x 1.250 mm x 2.720 mm Teža: 1.200 kg OPREMA Digitalni prikazovalnik v smeri Y Središčna opora Samostojna montaža Zložljiva letvena rešetka Lesena zadnja stena

Stanje: rabljeno, Leto izdelave: 2005, skupna višina: 1.340 mm, skupna širina: 4.160 mm, moč: 16 kW (21,75 KM), največja širina rezanja: 1.060 mm, višina mize: 1.060 mm, Ponujamo rabljeno tračno žago KASTO BBS U 10 serije 102, leto izdelave 2005. Proizvajalec: KASTO Model: BBS U 10 serije 102 Leto izdelave: 2005 Stanje: rabljeno ID kategorije: 1638 ID tipa: 1756 Tip: tračna žaga Napetost rezila: • Širina rezila 54 mm: 55 bar • Širina rezila 67 mm: 60 bar Nwedpfxsznza Ej Altji Celotne dimenzije stroja: (Vse dimenzije, ki se nanašajo na dolžino reza, so prikazane na naslednji strani) • Širina (z odprtim zaščitnim pokrovom), približno: 5.255 mm • Širina (z zaprtim zaščitnim pokrovom), približno: 4.160 mm • Višina (z lasersko napravo), približno: 1.340 mm • Višina nakladalne konzole: 1.060 mm Potrebe po električni energiji: • Skupna moč pogona, približno: 16,0 kW • Moč motorja pogona žage, približno: 7,5 kW Kapaciteta rezanja: • Minimalna širina reza: 10 mm • Maksimalna širina reza: o z merilnim opornikom: 900 mm o brez merilnega opornika: 1.060 mm Hitrost rezila: Nadzorovana s frekvenco • Standardno: 9–90 m/min • Možnost: 16–160 m/min Hitrost podajanja pri rezanju: Nadzorovana s frekvenco • 0,5–250 mm/min Dimenzije rezila: • 7772 × 54 × 1,6 mm ali • 7772 × 67 × 1,6 mm Širina reza: • 2,4 mm Vodila rezila: • Tri-valjna vodila, zamenljiva in nastavljiva Zadnje vodilo rezila: • Karbidno kolo, zamenljivo Čiščenje rezila: • Enostavno zamenljiva motorizirana krtača s plastičnimi ščetinami Sistem hlajenja: • Pretok skozi dve šobi Kapaciteta črpalke, približno: • 100 l/min Če imate kakršna koli vprašanja ali potrebujete dodatne informacije, nam pišite ali nas pokličite.

Stanje: rabljeno, Leto izdelave: 2001, maks. širina reza: 4300 mm maks. višina reza: 2200 mm premer žaginega lista: 300 mm maks. obdelovalna debelina: 80 mm luknja žaginega lista: 30 mm merilni sistem: lestvica nagib glave žage: ročno pomik žage: ročno odsesovanje: zunanje odsesovanje zaklepanje žaginega nosilca: ročno teža pribl.: 1200 kg dimenzije: 5300 x 1200 x 2900 mm Nedszp H Dlspfx Altewi moč motorja: 5,5 kW Lokacija skladišča: Nattheim