Olympus 1,2 X 1,2 M Cnc Usmerjevalnik nakup rabljenega (100.863)

Stanje: novo, Leto izdelave: 2026, – Kapaciteta 1,2 mm – Variabilna regulacija hitrosti – Z 9 kompleti valjev Fsdpoydhlzjfx Abrjpn – Nožno upravljanje – Zaviralni motor – Nujna zaustavitev – Dokumentacija – 400V

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: 9 rack uprights, height 4,230 mm with foot section, usable depth 1,200 mm 27 cantilever arms with usable depth 1,200 mm, with deflectors 9 roof beams with 1,500 mm cantilever, pre-drilled for customer-supplied roofing (*Without timber purlins and trapezoidal sheets for roofing) Including longitudinal and diagonal bracing for 1,500 mm upright spacing Including fasteners (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments Fpsdsmhhy Nopfx Abrsn - Each upright with 3 bolted cantilever arms, 1,200 mm deep, with deflectors = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm upright spacing - Rack length: 12,100 mm - Including fasteners (excluding floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight shipping with prior delivery notification. The material is packed appropriately to enable easy unloading. The floor must be concrete, level, capable of being doweled, and able to bear the acting loads. The customer is responsible for checking and ensuring the floor condition, load capacity, and any necessary local permits. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to trade association guidelines, the rack uprights should protrude at least 500 mm above the top storage level.

Stanje: zelo dobro (rabljeno), CNC-OBDELAVALNI CENTER S 3 OSMI (X-Y-Z) Gibljiva plošča (obdelovanec), gibljiva obdelovalna glava Vertikalna plošča (obdelovanec) Fsdpfozx Dvdjx Abrspn Krmilnik MAESTRO konzola "eye-M PRO" Programska oprema "3D PROBE" za samodejno preverjanje dimenzij plošč Varnostna kabina obdelovalne glave Št. 2 vpenjal za pritrditev plošč Minimalne dimenzije obdelovanca (X-Y-Z) mm 200 x 50 x 8 Maksimalne dimenzije obdelovanca (X-Y-Z) mm 3050 x 1300 x 95 Skupna priključna moč (A) 43 DELOVNE SKUPINE: Št. 1 Vrtalna enota (5 strani s tehnologijo Ro.Ax. – rotacijsko-aksialna tehnologija) F31LTC (moč kW 3,9) z vreteni: - Št. 21 neodvisnih vertikalnih vreten - Št. 10 neodvisnih horizontalnih vreten (6 v osi X + 4 v osi Y) - Št. 3 neodvisnih vreten (za tečaje) Št. 1 Enota za krožno žago (za obdelavo v osi X), premer (mm) 125 Št. 1 vertikalno glavno vreteno (rezalna enota) HKS63 (moč kW 7,5) Samodejni sistem za menjavo orodij – mesta v skladišču (št. 6 mest za orodja)

Stanje: rabljeno, Leto izdelave: 2019, Funkcionalnost: nepreverjeno, izvrtina vretena: 82 mm, premer struženja: 560 mm, stružna dolžina: 1.900 mm, poteza s peresom: 150 mm, premer tulec: 75 mm, skupna dolžina: 3.830 mm, skupna širina: 1.750 mm, skupna višina: 1.620 mm, največja hitrost vretena: 2.200 obr/min, hitrost vretena (min.): 7 obr/min, skupna masa: 2.850 kg, hitro pomikanje X-os: 4 m/min, hitri pomik na osi Z: 8 m/min, teža obdelovanca (maks.): 400 kg, premer trikrake glave: 250 mm, KRAFT – CIKLIČNI STROJ ZA OBREDOVANJE ZDM 560Z × 2.000 – RABLJEN, TEHNIČNO SKORO KOT NOV Fpodpfx Abjzi Dadoron KRAFT – ciklični stroj za obredovanje ZDM 560Z × 2.000, leto izdelave 2015, iz prve roke. Od dneva nakupa je deloval samo v enosmenskem obratovanju, v praksi pa še manj. Tehnično je enak našim trenutnim novim strojem ZDM 560, vendar je cena le del cene novega stroja. Iz podjetja, ki se zapira. Ogled na licu mesta je mogoč kadar koli in je priporočljiv. KLJUČNE LASTNOSTI - SIEMENS SINUMERIK 828D basic T s programsko opremo ShopTurn za upravljanje v delavnici, vključno z 2 elektronskima ročnima kolesoma - Avtomatski 4-osni menjač orodij AK21, čas menjave orodja 2,4 s - Fiksni vodnik Ø 10-200 mm in vrtljiv vodnik Ø 20-100 mm serijsko - Ročni podporni nastavek MK 5 - Avtomatski menjalnik, 3-stopenjski STANDARDNA OPREMA - CNC-krmilnik SIEMENS SINUMERIK 828D basic T / ShopTurn - 4-osni menjač orodij AK21, električno programirljiv - 3-čeljustna vpenjalna glava Ø 250 mm, trde čeljusti - Fiksni + vrtljiv vodnik - Servo motorji SIEMENS X/Z - Zaklepanje vrat, zaklenjen pokrov vpenjalne glave, 2 halogenski strojni reflektorji - Avtomatski sistem za hlajenje in mazanje - Nemški + angleški priročnik za uporabo, izjava o skladnosti CE STALIŠČE – TRANSPARENTNO PREDSTAVLJENO Prvotno je bil nameščen sistem za odvajanje ostankov (glejte potrdilo naročila iz leta 2016). Danes ta sistem ni več nameščen, stroj pa trenutno deluje s posodo za ostanke. Po želji je mogoča dodatna vgradnja sistema za odvajanje ostankov, vendar za doplačilo. Prodamo »kot je«, brez garancije. Ogled na licu mesta ali prek videokonferenčnega klica je zelo priporočljiv, po želji pa je mogoč tudi neodvisen pregled delovanja in natančnosti. NAŠE STORITVE Ogled tovarne na spletu ali na licu mesta pri prejšnjem lastniku · Organiziran prevoz po želji · Montaža, zagon in usposabljanje operaterjev s strani naših servisnih tehnikov · neposreden kontakt v nemščini za rezervne dele in podporo · član FDM, združenje za veleprodajo strojev in orodij e.V. Ker gre za edinstven kos, velja: prodaja je pod pogojem. Pokličite nas ali nam pišite, dogovorili se bomo za termin ogleda.

Stanje: novo, Pressure: 175 Bending Length: 3020 mm Frame Gap: 2550 mm Installation Height: 600 mm Stroke (max.): 350 mm Throat Depth: 450 mm Dimensions (LxWxH): 3700 x 2230 x 3025 mm Weight approx.: 12,050 kg 4 Axes (Y1, Y2, X, R): Yes – all axes via Esa S630 (2D graphic control) CNC Crowning via Control: Yes, through CNC controller Esa S630 (2D graphic control) Motor Power: 22 kW Technical Specifications: Fpedpfx Abjfrvw Isron XL 30175 Unit Bending length: 3020 mm Bending force: 175 t Lowering speed: 150 mm/s Bending speed: 10 mm/s Return speed: 130 mm/s Stroke: 350 mm Installation height / daylight (E): 600 mm Throat depth (D): 450 mm Frame gap (B): 2555 mm Machine length (L): 3745 mm Machine width (W): 2280 mm Width without front gauge (Y): 1720 mm Maximum height: 3030 mm Main motor: 22 kW Hydraulic tank volume: 300 l Machine weight: 11,600 kg The robust EUROPA XL press brake impresses with its high precision, accuracy and versatile application options. The Europa XL features a very large installation height, thus providing a long stroke (ram travel). The generous throat depth is also above average, to keep restrictions at a minimum. We focus on quality, which is also reflected in the control system. As standard, we equip the machine with the high-quality DELEM DA 66 T control. Furthermore, the KKI Europa XL press brake is equipped with CNC axes Y1, Y2, X and R via the control system. Naturally, the DELEM DA 66 T is included as standard. We also make no compromises when it comes to the upper tool and die, fitting our KKI EUROPA XL CNC press brake with premium tools from EUROSTAMP Italy. Of course, every machine is only as good as its service. That’s why we place our main focus on highly qualified staff with extensive experience in CNC sheet metal processing. CNC Axes Y1, Y2, X and R DELEM 66 T 2D 17” Backgauge with double linear guides and ball screw Motorized crowning system with CNC control Heavy-duty height adjustment with handwheel; from 175 t heavy-duty version on linear guides Laser safety device on the upper beam CE safety equipment Various options available Other controllers: ESA 640 2D 15'' touchscreen controller € 4,520 ESA 675 W 3D 21'' touchscreen controller (Windows Base) € 6,485 DELEM 66 T 2D 17'' touchscreen controller (Windows Base) € 10,165 incl. DELEM 69 T 3D 17'' touchscreen controller (Windows Base) € 16,350 KK-Industries GmbH There’s something for everyone!

Stanje: novo, Pressure: 60 tons Bending length: 1550 mm Frame gap: 1250 mm Installation height: 410 mm Stroke length (max.): 220 mm Throat depth: 400 mm Dimensions (LxWxH): 2445x2200x2390 mm Weight approx.: 4250 kg Motor power: 7.5 kW Feature | Value | Unit --- | --- | --- Bending length | 1550 | mm Fpodpfx Abod En R Dersn Bending force | 60 | t Downward speed | 180 | mm/s Bending speed | 10 | mm/s Return speed | 160 | mm/s Stroke | 220 | mm Gap height (D) | 410 | mm Throat depth (E) | 400 | mm Distance between uprights (B) | 1250 | mm Length (L) | 2445 | mm Width (W) | 2200 | mm Width without front gauge (Y) | 1635 | mm Maximum height | 2390 | mm Main motor | 7.5 | kW Oil tank | 100 | l Weight | 4300 | kg The robust EUROPA XL press brake stands out for its high precision, accuracy, and versatile applications. The Europa XL offers an exceptionally large installation height and consequently a long stroke (ram travel). Its throat depth is also above average, allowing for as few limitations as possible. We focus on quality, which is also reflected in the control system. As standard, we equip the machine with the high-quality ESA S640 (2D graphical control). Additionally, the KKI Europa XL press brake features control of Y1, Y2, X axes via the controller. We make no compromises when it comes to the upper tooling and die, equipping the KKI EUROPA XL CNC press brake with quality tools from EUROSTAMP Italy. Of course, a machine is only as good as its service. For this reason, we focus on highly qualified staff with extensive experience in CNC sheet metal processing. CNC axes Y1, Y2, X ESA S640 (2D graphical control) Backgauge with dual linear guide and ball screw 2 robust front support arms, height-adjustable via handwheel; heavy-duty linear guide supports from 175 tons Laser safety device on the upper beam CE safety equipment Various options available Options: R-axis                                                                                                                             € 5,375 Further control options: ESA 640 2D 15'' Touchscreen Control                                                     € 4,520 incl. ESA 675 W 3D 21'' Touchscreen Control (Windows base)                € 6,485 DELEM 66 T 2D 17'' Touchscreen Control (Windows base)              € 10,165 DELEM 69 T 3D 17'' Touchscreen Control (Windows base)              € 16,350 KK-Industries GmbH There's something for everyone!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolt system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams, 1,500 mm cantilever, pre-drilled for on-site roof construction Fpsdpfx Ajh R Taqsbron (*excluding timber purlins and trapezoidal sheets for the roof construction) - Including longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and system can be extended at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction using IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,500 mm center-to-center spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with scheduling prior to delivery. Material is sensibly packed for easy unloading. The installation surface must be concrete, level, suitable for dowelling, and able to withstand the loads applied. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any official permits that may be required. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to occupational health and safety regulations, it is recommended that the rack uprights have at least 500 mm clearance above the top storage level.

Stanje: novo, Pressure: 100 t Bending length: 2600 mm Frame gap: 2150 mm Open height: 530 mm Stroke (max.): 300 mm Throat depth: 450 mm Dimensions (LxWxH): 3320 x 2260 x 2780 mm Approx. weight: 7900 kg 4 CNC axes (Y1, Y2, X, R): Yes, all axes controlled via Esa S630 (2D graphic control) CNC crowning via controller: Yes, via Esa S630 (2D graphic control) Motor power: 11 kW Technical specifications XL 26100 Bending length: 2600 mm Bending force: 100 t Approach speed: 160 mm/s Bending speed: 10 mm/s Fpedpfx Ajd En Ryobron Return speed: 150 mm/s Stroke: 300 mm Throat depth (D): 530 mm Open height / daylight (E): 450 mm Frame gap (B): 2150 mm Machine length (L): 3320 mm Machine width (W): 2260 mm Width without front gauge (Y): 1710 mm Max. height: 2780 mm Main motor: 11 kW Oil tank capacity: 190 l Machine weight: 7700 kg Model: KKI EUROPA XL The robust EUROPA XL press brake stands out for its high precision, accuracy, and versatile application possibilities. The EUROPA XL offers an exceptionally large open height, which results in a long stroke (cylinder travel). The large throat depth provides high flexibility for a wide range of sheet metal jobs. We place special emphasis on quality, reflected in the advanced control system. The standard controller is the high-quality Esa S640 (2D graphic control). Furthermore, the KKI Europa XL press brake is equipped with Y1, Y2, X, and R CNC axes, all controlled via the Esa S640. Naturally, CNC-controlled crowning via the Esa S640 (2D graphic control) is included. When it comes to tooling, we make no compromises: The KKI EUROPA XL is fitted with premium upper and lower tools from EUROSTAMP Italy. Of course, a machine is only as good as the service behind it. That’s why we focus on highly qualified staff with extensive experience in CNC sheet metal processing. Features: - CNC axes: Y1, Y2, X, R - Esa S640 (2D graphic control) - Backgauge with double linear guide and ball screw - Motorized crowning device with CNC control - 2 front support arms, heavy-duty version with height adjustment via handwheel (from 175 t up, heavy-duty version on linear guide) - Laser safety device fitted to upper beam - CE safety equipment - Various options available Other control systems available: - ESA 640 2D 15'' touchscreen control: €4,520 incl. - ESA 675 W 3D 21'' touchscreen control (Windows-based): €6,485 - DELEM 66T 2D 17'' touchscreen control (Windows-based): €10,165 - DELEM 69T 3D 17'' touchscreen control (Windows-based): €16,350 KK-Industries GmbH There’s a solution for everyone here!

Stanje: novo, x-axis travel: 3000 mm y-axis travel: 2000 mm z-axis travel: 250 mm Pump power for flushing: 37 kW Control system: Siemens PLC touch screen, directly usable DXF files Output pressure: max. 5500 bar Abrasive feed system for waterjet cutting machines – fill weight 350 kg OMAX vacuum sensor to monitor abrasive supply to the nozzle Sensor for monitoring pump pressure In waterjet cutting, water is compressed to pressures of up to 5500 bar. Depending on the requirement and the workpiece, this is then forced through a nozzle with a diameter between 0.01 and 0.08 mm. As the waterjet technology processes materials without heat input, no deformations occur. By adding an abrasive, waterjet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible manufacturing allows for both vertical and angled cuts. We are happy to accept your individual CAD data. Waterjet technology offers great advantages for industry, trades, and custom prototype production. It also scores points in terms of environmental impact, as the waterjet process operates dust- and steam-free and is material-efficient. Waterjet Cutting: Sample Gallery What already sounds impressive in theory is even more remarkable on the finished object. We have compiled a selection of images to demonstrate our capabilities with waterjet cutting. Browse through our sample gallery to get an impression of the possibilities offered by this modern machining process. Waterjet will also find the right solution for your project! Advantages - No deformations in the cut area - Cutting without thermal influence - Material-saving - High precision: +/- 0.1 mm - Cutting area: x = 3010 mm; y = 2010 mm; z = 250 mm - Flexible manufacturing - Vertical and angled cuts - Acceptance of your CAD data formats: DXF, DWG, IGES, STP, STEP, PRT, JPT, JAM - Environmentally friendly, steam- and dust-free We cut everything All materials formed to shape: Fedpfx Ashqnl Tjbrspn - Aluminum - Steel - Brass - Copper & bronze - Other precious metals - Glass - Granite & marble - Tiles - Composites - Promat cutouts - Rubber - Plastics - Plexiglass Optional: Oil cooler ..... €10,725.00 Water filter system..... €1,430.00 Sludge extraction system ..... €10,725.00 Professional water treatment system..... €10,725.00 An oil cooler must be present during commissioning!!! Necessary for operation longer than 1 hour. Further videos:

Stanje: novo, – Kapaciteta 1,2 mm – Osem kompletov valjev – Nadzor s pedalom – Zavorni motor – Zasilna ustavitev Fpsdpfx Absucq D Ijrjn – 400 V

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, nosilnost na odsek shranjevanja: 3.000 kg, skupna dolžina: 34.000 mm, skupna višina: 4.500 mm, višina police: 4.500 mm, število vrst polic: 4, prostor za palete: 108 evropske palete, višina okvirja: 4.500 mm, širina okvirja: 1.100 mm, obremenitev na par nosilcev (maks.): 3.000 kg, dolžina police: 8.500 mm, dolžina opore: 2.700 mm, 4 vrste paletnih regalov (4 x M45112711-2) v vsaki dolžina 8,5 m, višina 4,5 m, globina 1,1 m, Fjdpfxjz Dr Nas Abrspn v vsaki 3 polja, širina 2,7 m, v vsaki 2 prečni nivoji, nosilnost police 3000 kg. - 16 okvirjev (RM4511 - RAL5019) - 32 osnovnih plošč, podložni material, pritrdilni material - 64 talnih sider (ZZBA1210) - 48 posameznih prečk (T27114 - RAL2008) - 4 tablice o nosilnosti (BSMcP) Okvirji so vijačeni, niso predmontirani. Prevoz / dostava: - največ 20 delovnih dni po prejemu plačila - dostava na gradbišče / mesto montaže - razkladanje iz tovornjaka opravi kupec z lastno dvižno opremo. - dostave po celotnem območju Nemčije, razen otokov! - dobava v države EU po individualnem dogovoru.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized Fedpfx Aeguk Dksbrspn - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: rabljeno, prevoženi kilometri: 419.200 km, moč: 175 kW (237,93 KM), prva registracija: 06/2013, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 5, skupna širina: 2.600 mm, skupna višina: 3.780 mm, Leto izdelave: 2013, Oprema: dvižna zadnja plošča, klimatska naprava, parkirni grelec, * Mercedes Benz 1824 L AXOR z večkomorno hladilno nadstavbo Carrier Supra 950 - BÄR LBW 2 kos. Fodezd Iraepfx Abrjpn * Dizelski motor - Prostornina: 6.374 ccm³ - 175 kW / 240 KM - Euro 5 - Zelena nalepka - * Dimenzije nadstavbe: Dolžina 7.700 mm x Širina 2.600 mm x Višina 2.330 mm in 2.100 mm notranja višina - Medosna razdalja: 4.900 mm - * 2 sedeža - Avtomatski menjalnik - Klima naprava - Vzmetenje: listno / zračno - Priklopna kljuka (samo priklopna krogla) - Formula gume: 4x2 * Retarder - Dovoljena skupna masa: 18.000 kg - Prazna masa: 10.550 kg - Nosilnost: 7.450 kg - * Tovornjak 1: 1824 L - Datum prve registracije / Prevoženi kilometri: 400.500 - Šasija: WDB 9505361L652633 - 144 - 2.330 mm notranja višina * Tovornjak 2: 1824 L - Datum prve registracije / Prevoženi kilometri: 513.750 - Šasija: WDB 9505361L752647 - 116 - 2.100 mm notranja višina * Tovornjak 3: 1824 L - Datum prve registracije / Prevoženi kilometri: 422.750 - Šasija: WDB 9505361L756551 - 119 - 2.330 mm notranja višina * Tovornjak 4: 1824 L - Datum prve registracije / Prevoženi kilometri: 419.250 - Šasija: WDB 9505361B980262 - 151 - 2.330 mm notranja višina * Vozila so na voljo takoj in pripravljena za prevzem - Vozila niso označena - * Za ogled se dogovorite za termin - Cena je na vozilo - * Kontaktna oseba: gospod Andreas Vogel * Podatki, navedeni na internetu, so nezavezujoči opisi. * Ne predstavljajo zagotovljenih lastnosti. * Prodajalec ni odgovoren za napake pri vnosu podatkov ali pri njihovem prenosu. * Pridržujemo si pravico do sprememb, napak in predčasne prodaje. Posebna oprema: Pokrov pesta, odlagalna površina na sredinskem tunelu motorja, priklopna kljuka: vlečna kljuka, avdio sistem: CD radio, akumulator 220 Ah, rezervoar za stisnjeni zrak iz aluminija, kabina: udobno vzmetenje (1,8 Hz), različica kabine: S (kratka z podaljšano zadnjo steno), generator 100 A, grafični informacijski zaslon z merilnikom porabe, zadnje luči za priklop dvižne ploščadi, zračni sušilnik z enim filtrom z ogrevanjem, stranski dvigalnik rezervnega kolesa, stikalo dvižne ploščadi, varovalka, sedeži v kabini: voznikov sedež, vzmeteno, udobno, vključno z horizontalnim vzmetenjem, pretvornik napetosti 24V / 12V 15 A, jeklena platišča 9.00x22.5, vtičnica 12 voltov, vtičnica v kabini 24V, zaščita proti podiranju spredaj, priprava za hladilno škatlo/hladilnik, priprava za telefon/faks, sprednja os s krajšim izbočanjem, toplotno izolirano steklo, dodatno ogrevanje (zrak) Dodatna oprema: Emisijski standard EURO 5, konfiguracija osi: 4x2, obremenitev osi sprednje osi 7,5 t, vzvratna ogledala, električno nastavljiva in ogrevana, vzvratna ogledala, električno nastavljiva, leva, indikator zunanje temperature, kabina za daljše prevoze, strešno okno (jeklo), blokada diferenciala zadnje osi, kabina: S (kratka), vzmetenje: listno / zračno, električni pomik stekel, menjalnik 6-stopenjski - tip: G 85-6, rezervoar za sečnino (AdBlue): 95 l, zadnja os H 6, stožnica 440, notranji filter: filter za cvetni prah, karoserija/nadstavba: šasi, rezervoar za gorivo: 210 l, plastika, prenova modela Axor 2, motor 6,4 l - 175 kW dizel (OM 906 LA), sistem za samodejni izklop in vklop motorja, motorna zavora s konstantno dušilko, rezervno kolo pod koncem šasije, kolutne zavore, sedeži v kabini: sovoznikov sedež, fiksno, stabilizator zadnje osi, stabilizator sprednje osi, sistem Telligent Brake z ABS+ASR, zaščita proti podiranju zadaj, fiksno, blokada proti kraji, dovoljena skupna masa 18.000 t.

Stanje: novo, prva registracija: 12/2014, Leto izdelave: 2014, KRONE Turntable Trailer – Jumbo Carrier with Swap Body • ABS • Lift-lowering system • BPW ECO Plus axles • Full air suspension • LED tail lights • Length-adjustable drawbar • Tire size: 445/45 R 19.5 Fpedpfswmpkrjx Abrsn • Good tires! • 18,000 kg gross vehicle weight KRONE Swap Body • With split sideboards • Kinnegrip • Wooden floor • High front wall • Internal dimensions: 7,250 x 2,500 x 600 mm (LxWxH) • Loading edge/height: 1,180 mm - New inspection/TÜV and safety check! - Ready for operation Errors and prior sale excepted!

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 7.000 mm, pomik osi Y: 1.600 mm, pomik po osi Z: 1.400 mm, dolžina podajanja os X: 7.000 mm, dolžina pomika po osi Y: 1.600 mm, dolžina podajanja os Z: 1.400 mm, Komplett mit allen zur Aufstellung / Inbetriebnahme erforderlichen Baugruppen. x = 7 m, y = 1,6 m, z = 1,4 m (800 mm + Pinole 600 mm). Generalüberholung 2007, Baujahr 1991. Eilgang 12.000 mm/min, w-Achse 6.000 mm/min. Neue Siemens Sinumerik 840D Steuerung, neue Antriebsmotoren, Führungsbahnen überholt, neue Schaltschränke. Die ECOCUT 1 wurde danach nur wenige Stunden genutzt. Fpodpfxjz Dunlj Abren Drehtisch TDV 2: max. Werkstückgewicht 6 t, Spannfläche 1.000 x 1.000 mm. Drehtisch TDV 3: max. Werkstückgewicht 12 t, Spannfläche 1.250 x 1.600 mm. Zubehör: Zwei Winkelfräsköpfe, Kettenwerkzeugwechselsystem, Plattenfeld, Komplettgehäuse, Knoll Trichterzuführung, Absaugung, Kühlsystem mit Bandfilter. Inklusive aller BWF-Fixatoren für den Einbau von Maschinenbett und Aufspannplatte.

Stanje: novo, Dolžina pločevine: 2560 Debelina pločevine: 2,5 Standardna oprema: NC-krmiljenje Fpjdpfxogiclas Abrsn Programirno motorizirano zadnje vodilo s hodom 750 mm Osvetlitev sence rezalne črte 1 kos vpenjalne roke z merilno lestvico 2 kosa podpornih roke za pločevino 1 kos dodatne podporne roke (za modele 1106-1306-1505) Zaščita za prste Kroglična miza (Ball Transfer Table) Enostavna nastavitev reže od spredaj Kroglični vreteno Števec rezov Prenosno nožno stikalo z gumbom za zaustavitev v sili Svetlobna pregrada na zadnjih varovalih

Stanje: novo, Pressure: 220Bending length: 3020Frame gap: 2550Clear height: 600Stroke length (max.): 350Throat depth: 450Dimensions (LxWxH): 3745x2290x3055Approx. weight: 11,2504 axes (Y1, Y2, X, R): Yes, all axes controlled via Delem DA 66 (2D graphical control)CNC crowning via control: Yes, through the Delem DA 66 CNC controller (2D graphical control)Motor power: 22Technical specificationsXL 30220UnitBending length: 3020 mmBending force: 220 tLowering speed: 140 mm/sBending speed: 10 mm/sReturn speed: 130 mm/sStroke: 350 mmClear installation height / daylight (E): 600 mmThroat depth (D): 450 mmGap between frames (B): 2555 mmMachine length (L): 3745 mmMachine width (W): 2290 mmWidth without front stop (Y): 1720 mmMaximum height: 3055 mmMain motor: 22 kWOil tank capacity: 300 lMachine weight: 11,800 kg Model: KK Kletzer EUROPA XL The robust EUROPA XL press brake stands out thanks to its high precision, accuracy, and versatile application options. The EUROPA XL offers a very large clear height and, as a result, a long stroke (ram travel). The throat depth is also above average, providing maximum flexibility with minimal limitations. We focus on quality, reflected in the machine’s control system. As a standard controller, we use the high-quality Esa S640 (2D graphical control). Furthermore, the KKI Europa XL press brake is equipped with Y1, Y2, X, and R CNC axes via the controller. Naturally, CNC crowning is also integrated via the Esa S640 (2D graphical control). We make no compromises on the upper tooling and die either, equipping the KKI EUROPA XL CNC press brake with premium tools from EUROSTAMP Italy. Of course, every machine is only as good as its service support. For this reason, we put a strong emphasis on highly qualified personnel with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2, X, and R Esa S640 (2D graphical control) Backgauge with double linear guides and ball screw Fpsdpfxod Edhlj Abren Motorized crowning system with CNC control Heavy-duty design, height adjustment via handwheel; from 175 t up, heavy version on linear guide Laser protection system on upper beam CE safety equipment Various options available Other controllers: ESA 640 2D 15" touchscreen control                                                        ¤ 4,520,-- incl. ESA 675 W 3D 21" touchscreen control (Windows based)                       ¤ 6,485,-- DELEM 66 T 2D 17" touchscreen control (Windows based)                    ¤ 10,165,-- DELEM 69 T 3D 17" touchscreen control (Windows based)                    ¤ 16,350,-- KK-Industries GmbH There is something for everyone!

Leto izdelave: 2014, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Aluminijast silos za shranjevanje z dolgim podstavkom, premer 3.000 Tehnični podatki / Mere Razpoložljivo število: 2 Prostornina: približno 35.000 litrov Vrsta posode: silos Stanje: rabljeno Primerno za živila: ne Izvedba: stoječa Notranji premer: približno 3.000 mm Zunanji premer: približno 3.060 mm Višina valja: približno 7.525 mm Skupna višina: približno 8.785 mm Teža: približno 1.800 kg Specifična teža medija: 0,60 t/m³ Delovni tlak: brez tlaka Debelina stene spodnjega dela: približno 4,0 mm Debelina stene zgornjega dela: približno 5,0 mm Debelina stene plašča/valja: približno 4 mm Delovna temperatura: 50 °C Material / Lastnosti Material notranjega plašča: aluminij Oznaka materiala: AlMg3 Fsdpfx Aozy D Iisbrepn Oprema Izvedba podstavka: obroč/podstavek Vrsta dna (zgornji del): koničasto dno Vrsta dna (spodnji del): konus Naklon konusa: 60 stopinj Zgornji del: 1 x ograja na robu strehe (višina: približno 1.200 mm) 1 x samodejno zapiralna vrata 2 x luknja za žerjav 1 x pokrov DN 600 z pokrovom, zračnimi odprtinami in varovalom proti padcu 1 x prirobnica DN 100 (merjenje nivoja) 1 x prirobnica DN 100 (polnjenje) 1 x navojna puša 1 1/2" (signalizacija mejnega nivoja) 1 x prirobnica DN 250 Plašča: 1 x vrata za dostop (približno 1.400 x 850 mm) 1 x cev za polnjenje DN 100, ki se na spodnjem delu konča v Storzovo spojko 4 x nosilec cevi za cev za polnjenje 1 x zaščitna cev za kabel DN 50 1 x navojna puša 1 1/2" za signalizacijo mejnega nivoja Spodnji del: 1 x izhod DN 200 1 x priključek za sesanje Silos ima 60° konus. Opombe: Ena od silosov ima enojne stopnice z varovalom (dodatna cena: 1.250 €). Trenutno priključena oziroma prisotna merilna in regulacijska tehnika bo brezplačno priložena. Vendar za njeno delovanje ne prevzemamo nobene garancije. Dokumentacija: Risba Statika posode

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Aluminijast ravni transportni trak Geppert, model AM-F, 7,30 m x 0,30 m, z pogonom. Plastični modularni trak AM-F se odlikuje po svoji elegantni zasnovi. Širina okvirja je tako le 14 mm večja od širine verige. Tudi na preusmeritvenem mestu je razlika le 40 mm. Višina okvirja skupaj z verigo je 95 mm. Modularne plastične verige modela AM-F so optimalne za čiščenje, izjemno vzdržljive, vzdrževanje pa je enostavno, saj je mogoče zamenjati posamezne člene. Tehnični podatki: Leto izdelave: 2012 Dolžina: 7,30 m Širina: 0,30 m Višina: 1,00 m Pogon: 220/240 V, 1-fazni Celotna zaprtje tovarne, velika izbira skladiščnih ploščadi, paletnih regalov, regalov s policami, dvigal. Visokokakovostni industrijski stroji, stružni stroji, brusilni stroji, ročni stroji. Druge artikle – nove in rabljene – najdete v naši spletni trgovini! Mednarodni stroški pošiljanja na zahtevo. Fpsdpfx Absg Ib U Hjron

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, nosilnost na odsek shranjevanja: 3.250 kg, skupna dolžina: 82.200 mm, skupna višina: 5.000 mm, razmak između stupova: 3.300 mm, višina police: 5.000 mm, število vrst polic: 6, prosta razpetina: 3.300 mm, višina okvirja: 5.000 mm, širina okvirja: 1.100 mm, obremenitev na par nosilcev (maks.): 3.250 kg, dolžina police: 82.200 mm, dolžina opore: 3.300 mm, 2 jednostruka reda paletnih regala + 2 dvostruka reda paletnih regala (8 x M50113313-4) svaki 13,7 m dužine, 5 m visine, 1,1 m dubine, svaki po 4 polja, 3,3 m širine, svaki po 3 nivoa nosača, nosivost po polici 3250 kg. - 30 ramova (RM5011 - RAL5019) - 80 osnovnih ploča, podložno materijala, montažni materijal - 20 distancera/spojnica za dvostruke redove (ZAbh20) Fpodpfszhi Scjx Abren - 120 anker vijaka za tlo (ZZBA1210) - 144 pojedinačnih nosača (T33135 - RAL2008) - 0 zaštite od udara / zaštite od sudara (ZRS40901) - 6 oznaka nosivosti (BSMcP) Ramovi vijčani, nisu prethodno montirani Prevoz / isporuka: - najviše 20 radnih dana nakon prijema uplate - isporuka na gradilište / mesto montaže - istovar sa kamiona vrši kupac sopstvenim viljuškarom - Isporuke se vrše na teritoriji cele Nemačke osim ostrva! Isporuke u države EU po pojedinačnom dogovoru.

Stanje: dober (rabljeno), Filter za dim, ki nastaja pri varjenju, sesalni sistem za dim, ki nastaja pri varjenju, mobilna filtrska enota, sesalnik za dim, ki nastaja pri varjenju -Proizvajalec: Kemper, mobilni sesalni sistem za dim, ki nastaja pri varjenju, tip Eco M 3 x 400 V / 50 Hz -Pogonska moč: 0,75 kW -Maksimalni pretok zraka: 1650 m³/h -Maksimalno povečanje tlaka: 2100 Pa Fsdpfx Abjx I Aknsropn -Sesalna roka: Ø 150 mm x 5000 mm -Ventilator: Ø 290 mm x 60 mm -Število: Na voljo sta 2 sesalna sistema za dim, ki nastaja pri varjenju -Cena: na kos -Dimenzije za transport: 1200/800/V780 mm -Teža: 38 kg/kos

Stanje: dober (rabljeno), Dodatna oprema za obdelavo pločevine Multi V spodnje orodje 100 x 100 x 5400 mm Skupna dolžina: 3100 mm Skupna širina: 75 mm V-širina: 10 - 20 - 24 - 30 - 40 mm Prosimo, upoštevajte: Informacije na tej strani smo zagotovili po najboljšem vedenju in prepričanju ter, kolikor je bilo mogoče, pridobili od proizvajalca. Informacije so podane v dobri veri, vendar točnosti ni mogoče zagotoviti. Zato le-te ne predstavljajo garancije ali pogodbenih pogojev. Priporočamo, da preverite vse pomembne podrobnosti. Fedpfszc Iypox Abropn

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, nosilnost na odsek shranjevanja: 3.000 kg, skupna dolžina: 34.000 mm, skupna višina: 3.500 mm, razmak između stupova: 2.700 mm, višina police: 3.500 mm, število vrst polic: 4, prosta razpetina: 2.700 mm, nosilnost: 9.000 kg, prostor za palete: 108 evropske palete, višina okvirja: 3.500 mm, širina okvirja: 1.100 mm, obremenitev na par nosilcev (maks.): 3.000 kg, dolžina police: 34.000 mm, dolžina opore: 2.700 mm, 4 vrste paletnih regalov (4 x M35112711-2) Vsaka dolžine 8,5 m, višine 3,5 m, globine 1,1 m, vsaka s 3 polji, širina polja 2,7 m, vsaka z 2 nivojema nosilcev, nosilnost polja 3000 kg. - 16 okvirjev (RM3511 - RAL5019) - 32 osnovne plošče, podložni material, pritrdilni material Fpjdpezk Dtmefx Abron - 64 talnih sider (ZZBA1210) - 48 posameznih prečk (T27114 - RAL2008) - 4 table s podatki o nosilnosti (BSMcP) Okvirji so privijačeni, niso predhodno sestavljeni. Prevoz / Dostava: - največ 20 delovnih dni po prejemu plačila - dostava do gradbišča / mesta montaže - razklad tovornjaka opravi kupec z lastno dvižno napravo. - Dobave po celotnem ozemlju Zvezne republike Nemčije, razen otokov! Dobave v države EU po individualnem dogovoru.

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 13.0 mm Total power requirement: 18 kW Weight approx.: 9,200 kg Dimensions (LxWxH): 4,000 x 1,900 x 2,350 mm Our renowned brand KK kletzer CNC GUILLOTINE SHEAR, guided ram design Model 3213, offers everything required for perfect cutting operations. KK kletzer CNC-guided guillotine shear Featuring robust, durable mechanical and hydraulic systems, a precise CNC backgauge with ball screw, and a user-friendly CNC controller, KK kletzer guillotine shears are highly efficient production machines. Our standard portfolio covers shears for sheet thicknesses from 6 mm to 20 mm and cutting lengths from 3 to 6 meters. Higher sheet thicknesses and cutting lengths are available upon customer request. Their exceptionally sturdy, fully welded frame accounts for the long service life of our guillotine shears. The entire machine body, cutting beam, and backgauge are resistant to torsion and deformation, ensuring maximum cutting quality. By entering the sheet thickness and material type, the CNC control automatically determines the required cutting angle and cutting gap. Our renowned brand KK kletzer CNC GUILLOTINE SHEAR, guided ram design Model 3213, offers everything required for perfect cutting operations. Fedpfx Abefl S Eforjpn Technological advantages: - Fast and precise cuts - Stable, long-lasting frame structure - Automatic cutting gap and angle adjustment - Easy operation - Low maintenance costs - High safety standards - Use of components from leading manufacturers - Low unit costs Technical data: - Sheet thickness: 13 mm - Cutting length: 3,280 mm - Cutting angle: 0.3 – 2° - Backgauge: 1,000 mm via CNC - Motor power: 18 kW - Length: 4,000 mm - Width: 1,900 mm - Height: 2,350 mm - Weight: 9,200 kg Features: • Guided ram design • CNC controller ELGO P 40 T - Backgauge - Cutting angle - Cutting gap - Cutting length • Ball screw for backgauge positioning • Ball transfers in the table • Side gauge • 2 support arms • 1,000 mm flip-up finger guard We have numerous references!

Stanje: novo, Blechlänge: 2060 Blechstärke: 3 Standardzubehör NC-Steuerung Programmierbarer, motorisierter Rückanschlag mit 750 mm Hub Schattenlinienbeleuchtung 1 Stück Anschlagschiene mit Skala 2 Stück Materialstützarme 1 Stück Materialstützarm (bei den Modellen 1103, 1303, 1503) Fingerschutz Schneidlinienbeleuchtung Kugelgewindetrieb Fjdpfegick Sex Abropn Schnittzähler Tragbares Fußpedal mit Not-Aus-Schalter Lichtschranke an den hinteren Schutzvorrichtungen Optionen 0–180° verstellbarer Winkelanschlag: 910 EURO Pneumatisches Blechstützsystem (hinten): 3.200 EURO Lichtschranke hinten (Sicherheit): 1.620 EURO Elgo P40T Touchscreen-Steuerung: 1.960 EURO Klinge für Edelstahl (statt Standard): 1.000 EURO Ersatzklingen (Ober- und Untermesser, 1 Satz): 2.350 EURO