Mc 4 Komplet nakup rabljenega (61.976)

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, 9 units frequency inverters - MC07B0015-5A3-4-50 / FSC11B - 1.5 kW Price: Negotiable Hjdpfxst Sv Eks Afasp

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, 2 pieces frequency converter - MC07B0005-5A3-4-50 / FSC11B - 1.5 kW Price: negotiable Hsdpfx Afst Sv Hujajp

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, 1 piece frequency inverter – MC07B0220-503-4-00 / FSC11B – 1.5 kW Price: negotiable Hodpot Sv Ryefx Afasp

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, 2 units frequency inverter - MC07B0150-503-4-00 / FSC11B - 22.2 kVA Price: negotiable Hodpfxet Swaps Afajp

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, nosilnost: 40.000 kg, dvižna višina: 13.400 mm, vrsta goriva: električni, tip droga: teleskopski, gradbena višina: 2.318 mm, lastna masa: 34.420 kg, skupna dolžina: 5.244 mm, vrsta pogona: Elektro, gradbena širina: 2.250 mm, Pick & Carry-Kran Hsdpet Dd Ukefx Afaop Masttyp: Teleskop Zustand: Neuwertig Technischer Zustand: Sehr gut Bereifung vorne: Non Marking Bereifung hinten: Non Marking Fernbedienung

Stanje: rabljeno, Leto izdelave: 1989, x-hod 650 mm y-hod 410 mm z-hod 450 mm x-pomik spredaj 1000 mm Hedpex U A Rnjfx Afaop Krmiljenje mc4va Menjalec orodij Ni znanih napak pri nas

Leto izdelave: 2006, obratovalne ure: 109.000 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Horizontal machining centre with 6-station pallet system The machine has only been used for aluminium – new spindle installed in 2020 TECHNICAL DETAILS X-axis: 700 mm Y-axis: 800 mm Z-axis: 800 mm NC rotary table, B-axis 0.001° Spindle speed: max. 18,000 rpm Control: SIEMENS 840D Shopmill Clamping surface: 500 x 500 mm Table load capacity: max. 800 kg Workpiece diameter: max. 800 mm Workpiece height: max. 900 mm Tool holder: HSK 63 Tool changer: 180 positions Spindle power: max. 30 kW Torque: 5,000 Nm Holding torque: 5,000 Nm Rapid traverse/feed rate: 60 m/min Feed force X/Y/Z: 10 kN EQUIPMENT - Chip conveyor - Pallet station for 6 pallets - Automatic 3D tool measurement with M+H wireless probe - Coolant system with paper band filter Hodpfx Aomfrgnsfaop - Through-spindle coolant system with band filter, 40 bar 30 tool pockets in the magazine are defective.

Stanje: zelo dobro (rabljeno), Stratasys Stratasys Fortus 450mc Industrial 3D Printer + Krumm Tec CLEAN MATIC 3150 + Transformer – Complete System Description: The Stratasys Fortus 450mc is a high-end, industrial 3D printer from the FDM (Fused Deposition Modeling) series. It is used worldwide for prototype manufacturing, small batch production, mechanical engineering, the automotive industry, medical technology, and aerospace applications. For sale is a complete industrial 3D printing system consisting of: - Stratasys Fortus 450mc (3D Production System) - Krumm Tec CLEAN MATIC 3150 cleaning station for support material - Badger Magnetics 8 kVA transformer (suitable for EU power grids) The system comes from professional use and was employed for the production of high-quality functional parts and prototypes. Main features of the Fortus 450mc: - Industrial FDM 3D printer with large build volume: 406 × 355 × 406 mm - Prints high-strength materials such as ABS-M30, PC, ASA, Nylon, ULTEM* - Very high dimensional accuracy and repeatability - Network capable, touchscreen, easy operation - Ideal for prototyping, small series production, tool making, jigs and fixtures (*depending on material licenses) Technical data Fortus 450mc: - Voltage: 120/208 V, 3-phase (transformer included for EU operation) - Power consumption: 18 A - Dimensions approx.: 127 × 91 × 196 cm - Software version, according to display: 6.2.6624.0 Hedox D Uqispfx Afaep Krumm Tec CLEAN MATIC 3150: - Model: CM 3150 US/PS - 4 kW, 400 V, 50 Hz, 16 A - Ideal for removal of SR-30 / SUP706 support material - Weight: 140 kg Total weight approx.: 600–700 kg Important note: "The table shown in the photos is not included in the sale." Scope of delivery: - Stratasys Fortus 450mc - Krumm Tec CLEAN MATIC 3150 cleaning station - Badger Magnetics 8 kVA transformer (Technical data subject to change and errors excepted!) Further questions can gladly be answered by phone.

Stanje: rabljeno, prevoženi kilometri: 273.309 km, moč: 316 kW (429,64 KM), prva registracija: 03/2020, vrsta goriva: dizel, velikost pnevmatike: 385/65r22.5, konfiguracija osi: 6x2, medosna razdalja: 3.400 mm, gorivo: dizel, zavore: zaviranje z motorjem, barva: črn, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, skupna dolžina: 7.200 mm, skupna širina: 2.550 mm, skupna višina: 3.500 mm, Leto izdelave: 2020, Oprema: ABS, AdBlue, centralno zaklepanje, električno upravljanje oken, greljenje sedeža, klimatska naprava, nadzor oprijema, tempomat, zapora diferenciala, = Further Options and Accessories = - Remote central locking - Lift axle - Air suspension - Radio - Disc brakes - Sun visor - Toolbox = Remarks = Belgian registration documents. DAF CF 430 6x2*4 Lift and steering axle. Hedpeyv Hl Sefx Afaop Crane: Make: Copma Type: 240.4 Year: 2009 Radio remote control. 2.05 m – 9,600 kg 4.35 m – 5,000 kg 6.10 m – 3,400 kg 7.95 m – 2,530 kg 9.90 m – 1,980 kg 11.95 m – 1,620 kg = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Front axle: Tyre size: 385/65R22.5; Steering; Tyre tread left: 60%; Tyre tread right: 60%; Suspension: leaf suspension Rear axle 1: Tyre size: 315/70R22.5; Dual tyres; Tyre tread left (inside): 15%; Tyre tread left (outside): 15%; Tyre tread right (inside): 15%; Tyre tread right (outside): 15%; Suspension: air suspension Rear axle 2: Tyre size: 385/55R22.5; Steering; Tyre tread left: 40%; Tyre tread right: 40%; Suspension: air suspension Weights Kerb weight: 13,312 kg Payload: 14,688 kg Gross vehicle weight: 28,000 kg Functional Crane: Copma Financial Information Price: On request Identification Type number: CF 430 6x2*4 / 24 t/m CRANE / KR = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-EN), Wouter Greutink (NL-DE-EN-ES-IT), We speak Russian. We try our best to provide correct information, but no rights can be derived from the given texts.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: R6AP3801, stružna dolžina: 600 mm, premer struženja: 360 mm, model krmilnika: Siemens CNC 840 D, TECHNICAL DETAILS Swing diameter: 360 mm Turning length: 600 mm Control: Siemens CNC 840 D MACHINE DETAILS Operating voltage: 400 V~ Hjdpfew Em A Ajx Afasp Phases: 3/PE Frequency: 50/60 Hz Maximum current: 48 A Rated current: 36 A Short-circuit current (Ik): 6 kA EQUIPMENT - Twin-spindle

Stanje: rabljeno, Frequency converter, frequency inverter, drive inverter, controller, variable speed drive - Power: 0.75 kW - 0.55 kW - Input: 380/500 V - 50/60 Hz Hodpfxeb N E E Aj Afaep - Output: 3-phase: 380/500 V - Quantity: 1 unit available - Weight: 3 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Servomotor, elektromotor, enosmerni motor, servo motor z reduktorjem, sinhronski motor -Proizvajalec: Siemens Wittenstein, servo motor z reduktorjem -Sinhronski motor: Siemens tip 1FK7083-2AF71-1RG0 -Napetost: 308 V -Hitrost: 3000 / max: 6000 vrt/min -Reduktor: Wittenstein SP 100S-MC1-4 -1K1-2K i= 4 -Gred: Ø 32 x 60 mm Hedoxr A Avjpfx Afajp -Količina: 5x motorji z reduktorjem na voljo -Cena: na kos -Dimenzije: 450/155/V200 mm -Teža: 25,1 kg/kos

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Servomotor, elektromotor, enosmerni motor, servo motor z reduktorjem, sinhroni motor -Proizvajalec: Siemens Wittenstein, servo motor z reduktorjem -Sinhroni motor: Siemens tip 1FK7042-2AF71-1RG0 -Napetost: 270 V -Hitrost: 3000 / maks: 9000 vrt/min -Reduktor: Wittenstein SP 075S-MC1-4 -1E1-2K i= 4 -Gred: Ø 22 x 35 mm -Količina: 8x motor z reduktorjem na zalogi -Cena: na kos -Dimenzije: 345/96/H140 mm -Teža: 8,2 kg/kos. Hjdpoxr Ugajfx Afaop

Leto izdelave: 2026, stanje: novo, Fleksibilne linije za uzdužno rezanje lima prilagođene su standardnim i srednjim proizvodnim potrebama sa mogućnošću personalizacije kapaciteta i širine. Bosporas Machinery je proizvođač linija za obradu traka, koji širom sveta isporučuje visokoperformantna i prilagođena rešenja za industriju. Naše standardne i srednjenaponske linije za uzdužno rezanje dizajnirane su za preciznu proizvodnju limova iz trake, sa pouzdanim radom, stabilnim učinkom i fleksibilnim konfiguracijama. Ovi sistemi su idealni za proizvođače kojima su potrebna efikasna rešenja za obradu limova srednje debljine. Dostupni su različiti kapaciteti i radni opsezi, a linije se mogu prilagoditi ciljevima proizvodnje, tipu materijala i zahtevima rasporeda postrojenja. Bilo da se radi o novim investicijama ili modernizaciji proizvodnje, Bosporas nudi kompletna rešenja po principu „ključ u ruke“ uz međunarodno iskustvo u realizaciji projekata. ⚙️ DOSTUPNE KONFIGURACIJE 2 mm | 1300 mm | 4 t linija za uzdužno rezanje 3 mm | 1500 mm | 15 t linija za uzdužno rezanje Proizvodimo i nestandardne kapacitete, širine i opsege debljina po zahtevu kupca. 📊 TEHNIČKI OPSEG Debljina materijala: 2–3 mm Širina trake: 1300–1500 mm Težina role: 4–15 t Visoka preciznost rezanja na dužinu Stabilan i kontinuiran rad Hodpfx Aoy Dug Hofaep 🔧 GLAVNE KOMPONENTE LINIJE U zavisnosti od projekta, linija može uključivati: • Hidraulična ili mehanička odmotača (decoiler) • Pravilac / nivelator • Servo sistem za uvodjenje materijala • Giljotina / rotaciona / hidraulična / ekscentrična mehanička makaza • Transporteri • Automatski sistem slaganja • Izlazni sto • PLC & HMI upravljački sistem ⚙️ KONSTRUKTIVNE KARAKTERISTIKE • Visoka tačnost i ponovljivost rezanja • Stabilnost ravnosti lima • Robustna industrijska konstrukcija • Servo upravljanje uvodjenjem • Intuitivni automatizovani interfejs • Modularni dizajn, mogućnost naknadnih proširenja • Pogodna za kontinuirani industrijski rad ⚡ OPERATIVNE PREDNOSTI • Fleksibilna proizvodnja različitih formata • Konstantan kvalitet rezanja • Smanjena potreba za radnom snagom i rukovanjem • Efikasna obrada materijala • Proj. rešenja po principu „ključ u ruke“ • Kraći rok isporuke u poređenju sa evropskim proizvođačima 🏭 PODRUČJA PRIMENE • Centri za obradu čelika • Distributeri limova • Proizvodnja građevinskog materijala • Proizvođači HVAC opreme • Industrija bele tehnike • Generalna obrada metala 📸 REFERENTNI PROJEKTI Fotografije u ovom oglasu prikazuju primere instalacija sličnih linija za uzdužno rezanje uspešno proizvedenih i puštenih u rad u različitim državama. Ove reference potvrđuju našu inženjersku stručnost i međunarodno iskustvo u projektima. Dodatne reference, nacrte rasporeda i tehničke detalje dostavljamo na zahtev.

Stanje: novo, lastna masa: 661 kg, največja dovoljena obremenitev: 1.339 kg, skupna masa: 2.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 2.880 mm, širina tovornega prostora: 1.940 mm, višina nakladalnega prostora: 2.000 mm, prostornina tovornega prostora: 11 m³, barva: srebrn, gradbena višina: 2.560 mm, delovna širina: 2.500 mm, Hydraulics, automatic reversing system, hot-dip galvanization, steel sheet walls, 4x supports, * IMMEDIATE AVAILABILITY * with steel sheet walls, 4x supports Technical Data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATE! - Permissible total weight: 2,000 kg - Unladen weight: 661 kg - Payload: 1,339 kg - Internal dimensions: 288 x 194 x 200 cm (L x W x H) - Overall external dimensions: 447 x 250 x 256 cm (L x W x H) - Loading edge height: 52 cm - Tyres: 155/80R13 - Brakes: yes - Jockey wheel: yes - 100 km/h certificate: available at extra cost - Including vehicle documents Body: - Floor: Wood, 18 mm phenolic resin-coated plywood - Side panels: Steel sheet walls - Roof material: Steel sheet roof - Chassis: KNOTT rubber torsion axle - Number of lashing eyes: 6 units - Rear door: YES - Tailgate: - - Rear door material: Steel sheet - Tailgate/door function: Angle lever lock - Interior light: available at extra cost - Supports: Yes, 4 units - Overrun device & brakes: Yes, KNOTT - Frame/chassis: V-drawbar, hot-dip galvanized by full immersion - Lighting connector: 13-pin - Registration: ZBII & COC papers Standard Equipment: - Sturdy V-shaped drawbar, hot-dip galvanized by full immersion - Overrun device from KNOTT - 18 mm thick floor plate - Reinforced side walls and roof made of steel sheet - Double-wing rear doors - Angle lever locks on the rear doors - 6 lashing rings on the floor - Jockey wheel - Automatic reversing system - Plastic mudguards - 13-pin connector - Reversing lights - Large, dimensioned safety lighting - Integrated rear fog lamp - Body: splash-proof - Registration documents: ZBII & COC papers Optional Accessories (available on request): - Anti-theft device - Lashing straps - Additional lashing eyes - Slat rails with rubber coating for tie-down straps & load bars - Load bars (steel or aluminum) - Interior lights - Reversing lights Hodpfx Aju Htlrofajp - and much more New vehicle with warranty and TÜV. We are happy to offer you tailored financing! Descriptions and images are protected by copyright! Over 800 trailers immediately available! We have been specialist dealers and repair workshop for over 30 years: Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix Delivery available throughout Germany for an additional charge! Trailer Center BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt Errors, omissions, and prior sale excepted.

Stanje: dober (rabljeno), prevoženi kilometri: 105.756 km, moč: 338 kW (459,55 KM), prva registracija: 10/2017, vrsta goriva: dizel, medosna razdalja: 5.650 mm, gorivo: dizel, kapaciteta rezervoarja za gorivo: 500 l, barva: bela, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2017, Oprema: AdBlue, = Dodatne možnosti in oprema = - PTO (odvzem moči) Hsdpfx Aexzq Hhsfajp = Dodatne informacije = Število cilindrov: 6 Prostornina motorja: 10.837 ccm Lastna teža: 20.300 kg Nosilnost: 16.700 kg Skupna dovoljena masa: 37.000 kg Tehnično stanje: dobro Vizualno stanje: dobro

Leto izdelave: 2014, obratovalne ure: 7.500 h, stanje: rabljeno, M2 GmbH offers you the following machines: - BAUER MC 96 - BAUER HDS 100 - BAUER BC 40 Further information available upon request! Hodpfx Ash Tyzfjfaep

Leto izdelave: 2026, stanje: novo, Bosporas Machinery | AYIKA je proizvajalec naprav za obdelavo kolutov, linij za profilno oblikovanje ter sistemov za napajanje stiskalnic, ki ponuja visokokakovostne in prilagojene industrijske rešitve. Težka linija za vzdolžno rezanje pločevinastih kolutov (slitting) je zasnovana za natančno rezanje jeklenih kolutov z možnostjo konfiguracije debeline do 4 mm. Hedpjyy Ru Esfx Afaep TEHNIČNI PODATKI Debelina koluta: 0,3 – 3 mm / do 4 mm Širina koluta: 300 – 1500 mm Teža koluta: do 20 ton Hitrost rezanja: do 100 m/min Natančnost rezanja: ±0,1 mm Minimalna širina reza: min. 50 mm Vrsta materiala: hladno valjana (CR), toplo valjana (HR), pocinkana, nerjaveča pločevina, PPGI, hladno valjano jeklo, aluminij Ta linija za vzdolžno rezanje je namenjena visokopreciznemu rezanju jeklenih kolutov z visoko nosilnostjo in zanesljivim delovanjem. Primerna je za obdelavo materialov debeline 3–4 mm, širine do 1500 mm ter teže kolutov do 20 ton. Na voljo je z enojno ali dvojno jamo (loop pit), kar optimizira pretok materiala, hitrost linije in proizvodno učinkovitost. Sistem je sestavljen iz popolnoma integriranih enot, vključno s hidravličnim odvijalcem (decoiler), vozičkom za nalaganje kolutov, začetnim odlepljevalcem, izravnalnikom, rezalno glavo, navijalcem odrezkov, napenjalnim sistemom ter hidravličnim navijalcem, kar zagotavlja neprekinjeno in stabilno proizvodnjo. Linija je na voljo v različnih konfiguracijah, odvisno od proizvodnih zahtev: Ta prilagodljiva zasnova omogoča optimizacijo sistema glede na vrsto materiala, debelino in proizvodne potrebe. KLJUČNE LASTNOSTI - Težka izvedba za 20-tonske kolute - Visoka natančnost rezanja (±0,1 mm) - Napredna rezalna glava z natančnim nastavitvenim sistemom - Hidravlični in avtomatizirani operativni sistemi - Visokohitrostna proizvodnja (do 100 m/min) - Robustna mehanska konstrukcija za dolgoročno uporabo PREDNOSTI - Kratek dobavni rok v primerjavi z evropskimi proizvajalci - Visoka učinkovitost in neprekinjena proizvodnja - Zmanjšan čas izpada - Možnost prilagoditev konfiguracije - Zanesljiv in uporabniku prijazen avtomatiziran sistem UPORABA - Servisni centri za jeklo - Avtomobilska industrija - Gradbeni sektor - Objekti za obdelavo kovin DODATNA OPREMA - Rotacijski križni izmenjevalnik (turnstile) - Sistemi za manipulacijo in transport kolutov - Napredne rešitve avtomatizacije - Po meri oblikovane konfiguracije *Slike, prikazane v tem oglasu, vključujejo referenčne instalacije podobnih linij za vzdolžno rezanje kolutov (debeline 3 mm in 4 mm), ki so bile uspešno načrtovane, proizvedene, dobavljene in zagnane v različnih državah. Ti projekti dokazujejo naše izkušnje pri dobavi zanesljivih in visoko zmogljivih linij za rezanje kolutov po vsem svetu.

Stanje: rabljeno, Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, master jaws, 4-jaw set Hedjglwmyepfx Afajp - Manufacturer: Röhm, master jaws for four-jaw chuck, 2 sets - Type: ID: 107546, jaw width 20 mm - Dimensions: see photo/technical drawing - 1 set with soft top jaws, width 30 mm - Price/sale: only as a complete set - Overall dimensions: 200/90/H70 mm - Total weight: 4.7 kg

Stanje: dober (rabljeno), Zamenljive čeljusti, nadgradne čeljusti, trikrako vpenjalo, segmentne čeljusti, vpenjalne čeljusti, stopničaste blok čeljusti, stopničaste nadgradne čeljusti, blok čeljusti, osnovne čeljusti, štiri-delni komplet čeljusti - Nadgradne čeljusti: komplet čeljusti za vlečne vpenjalne glave, 4 kompleti Hsdpfjlg H Naex Afaep - Mere: glej tehnično risbo na fotografiji - Cena/dobava: kompletno - Skupne dimenzije: 330/230/V105 mm - Skupna teža: 27,5 kg

Stanje: dober (rabljeno), Exchangeable jaws, add-on jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped add-on jaws, block jaws, base jaws, 4-jaw set -Add-on jaws: 4-piece hard chuck jaw set, 2 sets -Jaw width: 25 mm -Dimensions: see technical drawing in photo -Price/Sale: only as a complete set Hjdpoglwmgjfx Afasp -Total dimensions: 200/90/H55 mm -Total weight: 4.1 kg

Stanje: delavnici obnovljeno (rabljeno), tie-bar-set (4) completo para DEMAG ET 330 Hjdpfjfwctasx Afaep

Stanje: novo, Leto izdelave: 2025, Sliding table length: 3200 mm Cutting width at rip fence: 1350 mm Cutting width at crosscut fence: 3200 mm Hjdpfx Aoiv Hdvjfajp Cutting depth: 125 mm Scoring unit: yes Saw blade height adjustment: handwheel Saw blade tilt adjustment: handwheel Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: - Rip fence display: scale Crosscut fence display: scale Saw blade diameter: 400 mm Speeds: 3000 / 4000 / 5000 rpm Motor power: 7 kW Motor brake: yes / automatic Extraction connection: 80 mm and 120 mm Machine length: 3400 mm Machine width: 2000 mm Weight: 900 kg

Stanje: rabljeno, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, moč: 18 kW (24,47 KM), vhodna napetost: 400 V, vhodni tok: 40 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, Oprema: CE označba, dokumentacija / priročnik, Ponujamo to rabljeno obdelovalno središče FORMAT-4 PROFIT H200R 13.33 s prehodom, letnik 2022. Tip: PROFIT H200R 13.33 Serijska številka: 30B.05.067.22 Koda: 9417 Nazivna napetost: 400,0 V Število faz: 3P+N Frekvenca: 50/60 Hz Nazivni tok: 40,0 A Moč: 18,0 kW Leto izdelave: 2022 Krmilna napetost: 24 VDC Minimalno varovalo: 32 A Maksimalno varovalo: 50 A Minimalni zračni tlak: 8 bar Poraba zraka: 350 Nl/min Če imate vprašanja ali potrebujete več informacij, nam pošljite sporočilo ali nas pokličite. Hjdpfx Afeyvtq Uoaop

Stanje: rabljeno, Leto izdelave: 2016, Used machine Hedpfey Ih Rgsx Afaop Year of manufacture: 2016 Equipment and technical data: - Electrical system 3x400V 50/60Hz - Cardanic 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - Ceramic bearings including liquid cooling with infinitely variable height-adjustable extraction hood – motorized control - Full nominal power at approx. 12,000 rpm - Speed range: 1,000 - 24,000 rpm - Drive: 3-phase high-frequency motor, inverter-controlled - Rotation direction: right/left - 2 controlled compressed air connections - Interface for aggregates - Tool weight (rotating): 6 kg - Max. saw blade Ø 350 mm - Spindle cooling: liquid cooling - Continuously adjustable extraction hood - Profit H350 16.30: CNC machining center in gantry design (without tools), featuring digital drives (driven on both sides). The machine frame of the Profit H350 16.30 is made of thick-walled, electro-welded box sections. The steel ribbing inside the frame ensures high stability. - Machining area H350 16.30: Travel axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working field: X = 3000 mm Y = 1500 mm Z = 150 mm pass-through height Axis positioning speeds: Depend on the selected safety system (see layout for details). - Dual-drive gantry - X-axis guidance system: The drive for the X-axis gantry is via a rack-and-pinion with helical crowned teeth – ensuring maximum precision. The reduction gearbox provides the highest machining and repeat accuracy. Bearings are precision, encapsulated ball bearing carriages running on hardened and ground linear guides. - Y-axis guidance system: Bearings are precision, encapsulated ball bearing carriages running on hardened and ground linear guides. The Y-axis is positioned via a ground ball screw. - Z-axis guidance system: Bearings are precision, encapsulated ball bearing carriages running on hardened and ground linear guides. The Z-axis is positioned via a ground ball screw. - Automatic central lubrication system: Grease is automatically and precisely delivered to the guide carriages of the X, Y, and Z axes as well as to the ball screws of Y and Z. Lubrication cycle is performed automatically after a defined interval. - 12-position linear tool changer on the left of the machine frame including a pickup station for aggregates: The 12-position linear changer ensures minimal changeover times and provides sufficient space for milling tools. One aggregate station (configuration options, see layout). Max. tool diameter: 250 mm Max. tool length: 240 mm - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in X-direction and 5 spindles in Y-direction. Horizontal 6 spindles: 4 spindles in X-direction and 2 spindles in Y-direction. Stroke = 70 mm Max. drill bit length = 70 mm, shank diameter = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – X-direction Max. saw blade diameter: 120 mm Max. bla...