Mbs Balance V-Ivb-100 Vertical Balancing Machine nakup rabljenega (102.955)

Stanje: rabljeno, Leto izdelave: 1998, X-travel: 800 mm Y-travel: 500 mm Z-travel: 510 mm Total power requirement: 60 kW Machine weight approx.: 10 t Space requirements approx.: m CNC-controlled vertical machining center for bar machining. For 5-axis machining of complex shapes at any angle with maximum productivity and accuracy, Model: MC 535 SM Year of manufacture: 1998, # 535 1107 TECHNICAL DATA: Bar diameter/profile size x max. length: 80 x 800 mm (!) Milling slide travel longitudinal X-axis: 800 mm Milling slide travel transverse Y-axis: 500 mm Nedpfot Hwtfox Altswi Milling head vertical travel Z-axis: 510 mm Workpiece axis rotation/swivel: 360°/120° Installation height under vertical spindle approx.: 350 mm Spindle taper: HSK 63 Spindle speeds, infinitely variable: 36 - 10,000 rpm Feed rate all 3 axes: 1 – 10,000 mm/min Rapid traverse: 40,000 mm/min Spindle drive: 22 to 32 kW Total drive: 60 kW - 380 V - 50 Hz Weight approx.: 10 t Accessories / Special equipment: - CNC path control FANUC Type 16iM, for all 5 axes with display, direct input, various subprograms, tool corrections, tool monitoring, parallel programming, and much more - Bar loader magazine on the left side of the machine for up to 10 bars, each Ø 80 mm - Integrated CNC rotary-swivel device with collet chuck for bar material, in combination with hydraulic tailstock as counter-support - Automatic tool magazine with 66 tool positions, Ø 125 x 300 mm length - Tools also with ICS (internal coolant supply), independent tool data management, chip-to-chip time 4 sec - Tool breakage monitoring via laser light barrier, etc. - Gripping and swiveling unit to hold the workpiece during cut-off milling, remove it from the remaining bar, and transfer to a conveyor as a finished part - Fully enclosed working area, chip conveyor included, but without coolant system - Touch probe system for workpiece measurement possible, water-cooled milling spindle, various collets, no tools included Very robust machine.

Stanje: rabljeno, Leto izdelave: 1977, Maximum wheel diameter: 400 mm Wheel width: 280 mm Nedpfx Ast Hw Hxsltowi Module - min.: 1 Module - max.: 4 Total power requirement: 15 kW Machine weight: approx. 6,000 kg Space required: approx. ___ m L O R E N Z Universal Gear Hobbing Machine Model: F 400 Year: 1977 Serial No.: 8687 Wheel diameter min./max.: 400 mm Module range: 1 - 4 Number of teeth approx.: 8 – 210 Hobbing width approx.: 280 mm Maximum workpiece installation length approx.: 450 mm Swivel range of hobbing slide: up to 60° Cutter size (diam. x length): 160 x 220 mm Maximum cutter shift: 180 mm Cutter speeds: 125–500 rpm Table diameter x bore: 375 x 80 mm Feed ranges: axial 0.31 – 4.00 mm/rev radial 0.12 – 1.60 mm/rev tangential 0.035 – 4.5 mm/min Hob spindle drive approx.: 8 kW Total drive approx. max.: 15 kW – 380 V – 50 Hz Weight approx.: 6,000 kg Accessories / Special Equipment: • Various selectable hobbing programs for climb and conventional cutting, and for radial/axial processes, possibly for worm hobbing • Universal hobbing head with cutter shift • Hydraulic workpiece clamping in table and hydraulic tailstock • Hydraulically swiveling counter-holder connection for easier loading • Differential for helical gearing • Stepless speed adjustment, speed and ampere display • Change gears, various accessories, coolant system • Very robust construction Condition: good – to be demonstrated shortly Delivery: ex-stock – as inspected Payment: upon receipt of invoice, strictly net

Stanje: rabljeno, Leto izdelave: 1995, Wheel diameter – max. 80 mm Nsdpfjt Hw R Dsx Altewi Wheel width 120 mm Module – max. 3 Module – min. 1 Control unit SIEMENS 840 C Total power requirement 30 kW Machine weight approx. 7,500 kg Space requirement approx. ___ m LIEBHERR CNC-controlled gear hobbing machine Model LC 82 Year of manufacture 1995 # 0836 _____ Max. wheel diameter: 80 mm Module: 1 – 3 Helix angle: +/- 45° Distance from table center to tool center: 15 – 160 mm Vertical travel of milling slide: 250 mm Shifting/Tool traverse path: 180 mm Min. number of teeth: 3! Cutter diameter x length approx.: 90 x 200 mm Cutter speeds up to max.: 800 rpm Feed rates (axial/radial/tangential): 20/4/5 mm/rev Maximum workpiece clamping length: 250 mm Spindle drive approx.: 8 kW Total drive approx.: 30 kW – 400 V – 50 Hz Total weight approx.: 7,500 kg Accessories / Special features • SIEMENS CNC control system Type 840 C for 6 axes (i.e., cutter drive / table drive / swiveling angle of milling head / axial feed / radial feed / tangential feed), with gear-cutting-specific operator interface and diagnostic functions for fast troubleshooting. • Equipped for automatic threading of the hobbing cutter into the tooth gap • Automatic shifting of the cutter axis • Automatic workpiece loading system SSL = rapid-swing loader with mechanical step gearing and cam disk for fast loading cycles. Features triple rotary gripper for blank picking / machining position / unloading. Current workpiece size Ø 30 x 120 mm, helical gearing (pinion) • Workpiece feed is via a plate-chain conveyor (PKB) for transporting workpieces with frictional engagement using workpiece carriers. Additional conveyor belt for blanks and finished parts • Chip conveyor, complete working area enclosure, intermediate coolant tank with pump Complete enclosure of the working area with sliding door and oil mist extraction, etc. Machine can also be used for dry gear cutting. Condition: satisfactory to good – under power and ready for demonstration, compact construction! Delivery: ex stock – as inspected Payment: net – upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 2005, x-axis travel 750 mm y-axis travel 560 mm z-axis travel 600 mm Control HEIDENHAIN iTNC 530 Total power requirement 70 kW Machine weight approx. 11,000 kg Space requirement approx. m DECKEL MAHO Vertical machining center with linear drive technology in gantry design for highest precision, Model DMC 75 V linear Year of construction 2005 # 27 298 48 Working area: Longitudinal stroke X-axis 750 mm Vertical stroke Z-axis 600 mm Cross stroke Y-axis 560 mm Clamping area 950 x 650 mm Max. table load approx. 1,000 kg Workpiece height (portal clearance) max. approx. 610 mm Tool holder HSK 63 Spindle speeds 18,000 rpm Max. torque 86/130 Nm Spindle ramp-up / braking time 3.2 s Feed rates/rapid traverse X/Y/Z-axis max. 90,000 mm/min Feed force XY / Z 11,000 / 9,500 N Axis acceleration X/Y/Z-axis 15 / 12 / 18 m/s² Spindle drive power S1/S6 25/35 kW Total power approx. 70 kW - 400 V - 50 Hz Weight approx. 11,000 kg Nodpfx Aot Hw Trjltowi Accessories / Special equipment: This machine type is a high-precision vertical machining center with extremely stable gantry construction and high axis speeds via linear drives. • HEIDENHAIN 3-axis CNC control type iTNC 530 with all standard options, cycles and subprograms, control cabinet attached. • 30-position tool carousel magazine (max. tool diameter 100/140/200 mm x length max. 300 mm, tool weight max. 10 kg, with chip-to-chip time 6 s, with drill breakage detection), • BLUM receiver for RENISHAW probe, but no probe included • KESSLER spindle with spindle cooling, separate cooling unit for the linear drives • KNOLL coolant device and scraper-type chip conveyor and pump • Work area enclosure with 2 sliding doors, table easy to load, with rotary window. Spindle operating hours approx. 23,000 h, Probably no internal coolant supply (IKZ) Condition: very good – soon available for demonstration. Delivery: immediately from stock Payment: strictly net – upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 1997, x-travel 800 mm y-travel 400 mm z-travel 350 mm Total power requirement 40 kW Machine weight approx. 8 t Space requirement approx. m CNC-controlled vertical machining center for bar processing. For 5-axis machining of complex shapes at any angle with maximum productivity and precision, Type MC 530 SM Year of manufacture 1997, #530 1195 TECHNICAL DATA: Bar diameter / profile size x max. length: 60 x 800 mm (!) Milling slide travel longitudinal X-axis: 800 mm Milling slide travel transverse Y-axis: 400 mm Nwjdpot Hwx Ijfx Altei Milling head travel vertical Z-axis: 350 mm Workpiece axis rotation/swivel: 360° / 120° Mounting height under vertical spindle approx.: 300 mm Spindle taper: HSK 63 Spindle speeds continuously variable: 36 – 10,500 rpm Feed rates, all 3 axes: 1 – 10,000 mm/min Rapid traverse: 40,000 mm/min Spindle drive: 14 to 32 kW Total drive: 40 kW - 380 V - 50 Hz Weight approx.: 8 t Accessories / Special equipment: CNC path control FANUC type 16 MB, for all 5 axes with monitor and direct input, various subprograms, tool corrections, tool monitoring, parallel programming, 3-D and helical interpolation, and much more. IRCO bar loading magazine mounted on the left of the machine, for up to 10 bars with a diameter of 60 mm. Mounted CNC rotary/swiveling unit with collet chuck system for holding bar stock in combination with hydraulic tailstock as counter support. Automatic tool magazine with 42 tool stations, Ø 100 x 200 mm length. Tools also with internal coolant (IKZ), with separate tool data management, chip-to-chip 4 sec. Tool breakage monitoring via laser light barrier, etc. Pneumatically retractable finished part catcher between workpiece head and tailstock; conveyor belt for parts removal without opening the work area. Fully enclosed work area, chip conveyor installed, but without coolant supply (central provision). Thread cutting possible without compensating chuck, no toolholders included. Very robust machine.

Stanje: rabljeno, Leto izdelave: 2000, x-axis travel: 800 mm y-axis travel: 500 mm z-axis travel: 510 mm Total power requirement: 60 kW Machine weight: approx. 10 t Required floor space: approx. [ ] m CNC-controlled vertical machining center for bar machining. For 5-axis machining of complex shapes at any angle with maximum productivity and precision, Model: MC 535 SM Year of manufacture: 2000, # 535 1108 TECHNICAL DATA: Bar diameter/profile size x maximum length: 80 x 800 mm (!) Longitudinal milling slide travel, X-axis: 800 mm Transverse milling slide travel, Y-axis: 500 mm Vertical milling head travel, Z-axis: 510 mm Workpiece axis rotation/swiveling: 360° / 120° Mounting height under vertical spindle: approx. 350 mm Spindle taper: HSK 63 Spindle speeds, steplessly adjustable: 36 – 10,000 rpm Feed rates all 3 axes: 1 – 10,000 mm/min Rapid traverse: 40,000 mm/min Spindle drive: 22 to 32 kW Total drive: 60 kW – 380 V – 50 Hz Weight: approx. 10 t Accessories / Special equipment: CNC path control FANUC Type 16iM, for all 5 axes, with monitor, direct input, various subprograms, tool correction, tool monitoring, parallel programming, and much more Njdpfx Alet Hwyretowi Bar loading magazine mounted on the left side, holds up to 10 bars Ø 80 mm Built-in CNC rotary-swivel unit with collet chuck for holding bar material, combined with hydraulic tailstock as counter support Automatic tool magazine with 66 positions, Ø 125 x 300 mm Tools also with ICS, dedicated tool data management, chip-to-chip 4 sec. Tool breakage control via laser light barrier, etc. Grip and swivel unit for holding the workpiece during 'cut-off milling', to detach it from the remaining bar and deposit it as a finished part on a conveyor Completely enclosed working area, chip conveyor built in, but no coolant system Probe system for workpiece measurement possible, water-cooled milling spindle, various collets, no tools included Very robust machine.

Stanje: rabljeno, Leto izdelave: 1969, Grinding height: 60 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Grinding length: [mm not specified] Workpiece height: 60 mm Total power requirement: 50 kW Machine weight: approx. 7,000 kg Space requirement: [not specified] DISKUS vertical double-sided surface grinding machine in C-frame design with rotary table workpiece feed Model: DDS 600 CRA Year of manufacture: 1969 S/N: 6672 Grinding wheels – diameter x bore each: 600 x 150 mm Grinding wheel height approx.: 60 mm Workpiece transport disc external diameter: 810 mm Workpiece: Max. grinding height x grinding width: approx. 60 x 120 mm Spindle adjustment vertically, each approx.: 150 mm Nsdpfjt Hw N Hox Altewi Hydraulic infeed impulses for depth feed: 0.0025 – 0.05 mm Outer diameter of transport disc: approx. 810 mm Rotary table feed rate steplessly adjustable: 14 – 145 mm/s Grinding wheel speed each approx. (24 m/s)/765 rpm Grinding spindle drive each: 22 kW Total drive approx.: 50 kW / 380 V / 50 Hz Machine weight: approx. 7,000 kg Accessories / Special features • Workpiece rotary table device for round transport discs with corresponding cut-outs for inserting components and with automatic discharge of finished parts onto a chute into a transport box. • IONIC measuring control No. 9 So with probe for measuring ground workpiece height and, if required, with automatic hydraulic grinding wheel infeed. • Stepless speed adjustment of the rotary device depending on the grinding dimension and workpiece. • Manual grinding wheel adjustment via corresponding buttons • Hydraulically pivoting dressing unit (RA) between both grinding wheels for simultaneous dressing of both grinding wheels with appropriate compensation and automatic return to the effective workpiece thickness after dressing = high time savings, can be triggered manually as well as via timer • Ampere counters for both grinding spindle drives * Central lubrication system, • Mechanical height check of parts with automatic machine shutdown in case of overheight • Separate control cabinet, separate hydraulic unit, separate large belt filter system, various grinding wheels, various transport discs, etc. This machine is particularly suitable for the simultaneous plane-parallel grinding of workpieces in high-volume production. For example: shims, piston rings, hydraulic components, watch parts, stamped parts, etc. Condition: good – soon ready for demonstration Delivery: ex stock – as inspected Payment: net – upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 1997, x-axis travel 500 mm y-axis travel 350 mm z-axis travel 350 mm Total power requirement 15 kW Machine weight approx. 6 t Space requirement approx. [dimension not specified] Table size each 600 x 375 mm Milling slide travel longitudinal (X-axis) each 500 mm Milling slide travel cross (Y-axis) 350 mm Milling slide travel vertical (Z-axis) 350 mm Installation height under vertical spindle 100/450 mm Overhang of vertical head 390 mm Spindle taper (69872) SK 40p Infinitely variable spindle speeds 20 – 10,000 rpm Nedpfx Aet Hwqdjltewi Drilling capacity in steel St 60 approx. 28 mm Milling capacity approx. 150 m³ Feed rate all 3 axes or rapid traverse max. 0 - 25,000 mm/min Spindle drive 6/9 kW CNC path control: SINUMERIK 840 C for 3 axes with monitor and all standard sub-programs and options, integrated in the operator panel 2 fixed tables set side by side, with T-slots, load capacity 2 x 400 kg automatic tool changer mounted above spindle head, with 36 tool positions, tool change time approx. 4.5 sec (chip-to-chip), various tools included Tool size: max. Ø 63/120 x 250 mm length, max. weight approx. 4 kg Complete all-round work area enclosure with sliding doors at the front and sides Coolant system 400 liters with chip conveyor, belt filter, and fine filter, also suitable for internal coolant supply through the tool (IKZ) 2 clamping fixtures each with 8 pieces 3-jaw chucks, pneumatically actuated, clamping diameter approx. 50 mm This is a very fast and flexible machining center for demanding milling and drilling operations in medium and large batch production. Condition: good to very good – can be demonstrated under power

Stanje: rabljeno, Leto izdelave: 1987, x-travel: 500 mm y-travel: 380 mm z-travel: 300 mm Control: FANUC Total connected load: 12 kW Machine weight approx.: 2,300 kg Space requirements approx.: m S T A M A (FANUC) Vertical 3-axis CNC machining center Model: MC 010 Year of manufacture: 1987 # KMH 010 1110 Working area: Longitudinal travel X-axis: 500 mm Vertical travel Z-axis: 300 mm Cross travel Y-axis: 380 mm Nedpet Hw H Eofx Altowi Table size / working area: 650 x 380 mm Table load capacity approx.: 200 kg Installation height between table/spindle: 240–540 mm Distance to spindle center approx.: 350 mm Tool holder: SK 30 Spindle speeds: 1,500 – 6,000 rpm Feed rates / rapid traverse max.: up to 1,000–4,000 mm / 15 m/min Drilling/milling capacity in steel: 20 mm / 130 cm³ Milling capacity in aluminum: 500 cm³ AC main drive: approx. 3.7 / 5.5 kW Total drive power: approx. 12 kW – 380 V – 50 Hz Weight: approx. 2,300 kg Accessories / special equipment: • Original FANUC control with monitor, all modern subprograms, fault diagnostics, electronic handwheel, RS 232, easy and quick to program directly at the machine, and much more. • Vertical turret head with 10 tool stations, ISO 40, fast tool changeover time approx. 7 seconds chip-to-chip • Programmable rotary table mounted on the machine table (not an additional CNC axis), excellently suited as an indexing table, hydraulic, type RST 2 • Separate coolant unit • Various tool holders, some with tools Ideal machine for productive drilling, tapping and milling in steel and aluminum. Condition: Good to very good – demonstration under power possible Delivery: Immediately from stock, loaded free onto truck Payment: Net – upon receipt of invoice We look forward to your order. We constantly stock a wide range of CNC machining centers of all types – please inquire for alternatives!

Stanje: dober (rabljeno), Leto izdelave: 2006, Deli, ki so prikazane na fotografijah z roko, niso vključene. Nwjdpfx Aozk Iw Asltoi Tehnični podatki so prikazani na sliki.

Stanje: rabljeno, Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 108069, OKUMA MB-500 Vertikalni obdelovalni center – naprodaj OKUMA MB-500 Vertikalni obdelovalni center Na prodaj ponujamo dobro vzdrževan vertikalni CNC obdelovalni center OKUMA MB-500, primeren za visokonatančno obdelavo jekla, nerjavečega jekla, aluminija, sive litine in drugih tehničnih materialov. Stroj je bil redno servisiran in vzdrževan v profesionalnem proizvodnem okolju. Je povsem izpraven in ga je mogoče pregledati pod napetostjo. Glavne značilnosti: Proizvajalec: OKUMA Model: MB-500 CNC krmilje: OKUMA OSP Visoka togost in odlična natančnost obdelave Primeren tako za posamično kot tudi za srednje in velike serije Zanesljivo delovanje vretena Nwedpfxszhl Adj Altji Avtomatski menjalec orodij Sistem za pranje z emulzijo Transportni trak za odvod ostružkov (če je opremljen) Redno vzdrževan stroj v dobrem delovnem stanju Uporaba: Natančno rezkanje Vrtanje Navojno rezanje Splošna mehanska obdelava zahtevnejših komponent Stroj je na voljo za ogled po predhodnem dogovoru. Dodatne tehnične informacije, fotografije, videoposnetki in dokumentacija so na voljo na zahtevo. Za dodatne informacije ali dogovor o ogledu nas prosim kontaktirajte.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Schiavo Hydro 3000.6 Vertical glass washing machine with pre-wash zone, main washing zone, and drying zone. Wet zone is largely made of stainless steel and moisture-resistant materials. 150 mm one-piece washing brushes with stainless steel core. Including water tanks for water treatment. Including fan for glass drying. Outfeed zone with inspection lamps. Nwsdpfx Aljwd N Uretji Processing dimensions: Max. glass height: 3,000 mm Glass thickness: 3–22 mm Brushes: 6 units Connected load: 22 kW

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Schiavo Top 1600.4 vertical glass washing machine with pre-wash zone, main washing zone, and drying zone Wet zone constructed mainly from stainless steel and moisture-resistant materials. 120 mm one-piece washing brushes with stainless steel core Includes water tanks for water treatment Nsdpovxf Uxjfx Altowi Includes fan for glass drying Discharge section with inspection lamps Processing dimensions: Max. glass height: 1600 mm glass thickness: 3–19 mm brushes: 4 units connected load: 11 kW

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Schiavo Top 2000.4 Vertical glass washing machine with pre-wash zone, main washing zone and drying zone. Wet area predominantly made of stainless steel and moisture-resistant materials. 120 mm washing brushes made from a single piece with stainless steel core. Including water tanks for water treatment. Including fans for glass drying. Outfeed zone with inspection lamps. Working dimensions: Max. glass height: 2000 mm Nedswd Raispfx Altowi Glass thickness: 3–19 mm Brushes: 4 units Connected load: 11 kW.

Stanje: dober (rabljeno), Leto izdelave: 2009, HAAS VF-1 CNC vertikalni obdelovalni center Leto: 2009 Velikost mize: 660 mm x 356 mm Nwodpozhk S Djfx Altsi Pomik osi X: 508 mm Pomik osi Y: 406 mm Pomik osi Z: 508 mm Razdalja vretena do mize: 102-610 mm Vreteno: BT40 Maksimalne vrtljaje vretena: 7.500 obr/min Moč vretena: 14,9 kW Hitri pomik: 25,4 m/min Kapaciteta menjalca orodij: 20 orodij Teža: 2.500 kg Dodatki/možnosti: - HAAS (združljiv s Fanuc) CNC krmilje - Polž za odvod odrezkov - 10 različnih BT40 držal orodij - Avtomatski sistem mazanja - Priprava za 4. os (vključno z ožičenjem in pogonom) Stroji pod napajanjem v našem skladišču.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, Verticalne obrábacie centrum DECKEL MAHO DMC 635V Rok výroby: 2009 Njdpoyay D Uefx Altowi CNC riadenie: Siemens 840D Osi Pojazd X-os mm: 635 Pojazd Y-os mm: 510 Pojazd Z-os mm: 460 Vzdialenosť vretena od povrchu stola mm: 720 Rýchlosť posuvu m/min: 20 Rýchloposuv m/min: 30 Zrýchlenie osi m/s2: 5 Pracovný stôl Rozmery palety mm: 560×790 Max. hmotnosť obrobku kg: 600 Vreteno Max. otáčky vretena ot./min: 14 000 Výkon pohonu vretena kW: 18,5/15 (40%ED/cont) Krútiaci moment vretena Nm: 100/74 Systém nástrojov Upínanie nástrojov: SK40 Počet nástrojov v zásobníku: 20 Elektronický ručný ovládač Dopravník triesok Vzduchové ofukovanie stredom vretena voliteľné cez M-funkciu Priamy merací systém XYZ Prevádzkové hodiny stroja: Hodiny pod napätím: 14 500 Pracovný čas vretena: 3 600 Celkový príkon kVA: 35 Rozmery/Základný stroj/Hmotnosť Dĺžka mm: 2 275 Šírka mm: 3 288 Výška mm: 2 670 Hmotnosť: 4,5 t Vrátane upínačov a upínacích púzdier na nástroje

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Proizvajalec: DECKEL MAHO DMC 835V Leto izdelave: 2007 Krmiljenje: Siemens 840D / Shop Mill Pomik X-os: 835 mm Pomik Y-os: 510 mm Pomik Z-os: 510 mm Hitrost vretena: 10.000 obr/min Podajalna hitrost: Programabilna do 15 m/min - hitri pomik 30 m/min Pozicijska toleranca: 0,008 mm Magazin orodij: 30 mest Notranje hlajenje in transporter odrezkov Nsdoyaywbepfx Altswi Teža cca 6,5 t

Stanje: rabljeno, Leto izdelave: 2002, Krmiljenje HEIDENHAIN TNC426/430 Dimenzije mize 2900 x 750 mm Obremenitev mize 2800 kg X-hod 2300 mm Y-hod 800 mm Z-hod 600 mm Razdalja med vretenom in mizo 10 - 740 mm Glavno vreteno 0 - 12000 vrt/min (motorsko vreteno) Pogon 25 kW Vpenjanje SK40 Magazin za 30 orodij Maks. premer orodja D80 mm Maks. dolžina orodja 330 mm Maks. teža orodja 15 kg Teža 13000 kg Nwjdpfx Aoy T Ht Dsltji Mere DxŠxV = 6500 x 3100 x 3100 Oprema, dodatki - Hladilni sistem - Notranje hlajenje skozi vreteno (IKZ) - CELOX motorsko vreteno - Transporter za odrezke Stroški premika in nakladanja niso vključeni v ceno. Stroj je bil leta 2022 tehnično pregledan s strani servisa HEDELIUS na Madžarskem in obrabni deli so bili zamenjani. Od takrat je bil stroj skorajda neuporabljen. Stroj je izdeloval plastične dele.

Stanje: rabljeno, Leto izdelave: 2010, x-os 500 mm y-os 450 mm z-os 400 mm Nadzorni sistem iTNC 530 Heidenhain Območje vrtljajev – glavna vretena 20 – 10.000 min⁻¹ Moč pogona – glavna vretena 13 / 9 kW Maks. navor 83 / 57 Nm Nosilec orodja SK 40 DIN 69871 Površina za pritrditev mize 700 x 500 mm maks. obremenitev mize 500 kg T-utori 7 x 14 x 63 mm Število mest za orodja 60 maks. teža orodja 6 kg maks. premer orodja 80 mm maks. premer orodja pri prosti sosednji škatli 130 mm maks. dolžina orodja 300 mm Čas menjave orodja – orodje 1,6 s Čas menjave – odrezek 8,0 s Hitri pomik 24 m/min Vlačna sila 4,5 kN Hitrost podajanja 1 – 24.000 mm/min Nwedpey E Tv Ajfx Altoi Skupna poraba moči 26 kVA Teža stroja približno 4,5 t Potreben prostor približno 4,5 x 3,5 x 2,3 m CNC – vretenčna frezarka, vertikalna DECKEL MAHO – DMU 50 - 3 osi - samo približno 8.097 ur vretenčnega delovanja - paket varnostnih funkcij za izpad omrežja - uvoz datotek DXF

Stanje: zelo dobro (rabljeno), Proizvajalec: KUNZMANN Model: WF 650 Tip stroja: CNC univerzalni rezkalni stroj / CNC obdelovalni center Leto proizvodnje: 2007 Delovni čas stroja: 20.625 ur Delovni čas vretena: 3.909 ur Nadzorni sistem: HEIDENHAIN iTNC 530 Delovni obseg / Gibi Gib osi X: 650 mm Gib osi Y: 500 mm Gib osi Z: 450 mm Delovna miza Površina za vpenjanje: 1.000 × 600 mm Maks. obremenitev mize: pribl. 400 kg Glavno vreteno Število vrtljajev vretena: 12.000 vrt/min Vpenjalni konus: SK 40 Menjalnik orodij: 20 pozicij Krmiljena CNC rezkalna glava (os B) Vertikalna rezkalna glava, možnost nagiba: -5° +95° Pomiki in hitri pomiki Območje pomika: 0–4.000 mm/min Hitri pomik osi X: 25 m/min Hitri pomik osi Y: 25 m/min Hitri pomik osi Z: 20 m/min Delovni obseg Razdalja med mizo in vertikalnim vretenom: 100–550 mm Nwodpfx Aljzkl Rtstei Razdalja med mizo in horizontalnim vretenom: 270–720 mm Teža stroja in priključne vrednosti Teža stroja: pribl. 5.500 kg Skupna poraba energije: pribl. 20 kW Oprema CNC nadzorni sistem HEIDENHAIN iTNC 530 3D tipalo Priprava za 4. os Elektronsko ročno kolo Sistem za hlajenje Centralno mazanje Osvetlitev stroja Kabina s popolno zaščito

Stanje: pripravljen za uporabo (rabljen), Tehnični podatki Nadzorni sistem: HEIDENHAIN iTNC 530 Delovno območje / Gibi Gib X-osi: 1.040 mm Gib Y-osi: 600 mm Gib Z-osi: 500 mm Delovna miza Površina mize: 1.250 × 600 mm Maks. obremenitev mize: 600 kg Glavna vretena Nastavek za orodje: SK 40 Število vrtljajev vretena: 1–8.000 vrt/min Navor vretena S1 / S6: 140 / 200 Nm Moč motorja vretena 100 / 40 % ED: 13 / 19 kW Podi in hitri gibi Maks. hitrost podiranja: 40.000 mm/min Hitri gib X- in Z-osi: 70 m/min Hitri gib Y-osi: 40 m/min Njdpfxozklxds Altewi Menjalnik orodij Število mest za orodja: 30 Maks. premer orodja: 100 / 140 mm Maks. dolžina orodja: 300 mm Maks. teža orodja: 7 kg Priključni podatki in teža Skupna poraba moči: 39 kVA Teža stroja: približno 8.900 kg Oprema CNC-nadzorni sistem HEIDENHAIN iTNC 530 Elektronski ročni krmilnik HEIDENHAIN HR 410 Neposreden sistem za merjenje poti v Y- in Z-osi Linearni pogon v X-osi 30-mestni menjalnik orodij Notranji sistem za dovajanje hladilne tekočine skozi vreteno (IKZ) Sistem za hladilno tekočino s filtrom iz papirnate trakove Zračni curek skozi sredino vretena, izbira prek funkcije M Transportni sistem za žagovine Izpiranje postelje stroja Dokumentacija stroja

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 60 t, Used vertical baler HSM V-Press 1160 Plus, manufactured in 2015. The machine is regularly serviced by an authorized service center. The baler is fully operational and in very good technical condition. Pressing force: 594 kN Voltage / required: 400 V / 50 Hz Loading opening width x height: 1195 x 650 mm Nwedpfx Aozmwg Eeltei Bale dimensions (L x W x H): 1200 x 1100 x 1200 mm Machine dimensions (W x D x H): 1780 x 1568 x 2985 mm Machine weight: 2403 kg Bale material: film, mixed paper, cardboard, cutting waste Freight costs depend on weight, volume, and especially the distance. For inquiries, the following information is relevant: delivery address (postal code and town name). Further details require a phone call, so please contact us by phone to discuss transport costs and delivery modalities. Our contact details are found in the legal information of the seller. Payment in cash upon collection on site is possible. We sell and export worldwide. Thanks to our large storage capacity, we can also supply larger quantities flexibly and quickly. Please contact us before purchase. We issue intra-community invoices (VAT excluded). Business hours: Mon-Fri: 8:00 – 16:00 Sat: closed

Stanje: rabljeno, Leto izdelave: 2011, obratovalne ure: 5.000 h, številka stroja/vozila: M344Z16201031AHC, potovalna razdalja osi X: 2.032 mm, pomik osi Y: 660 mm, pomik po osi Z: 610 mm, obremenitev mize: 2.700 kg, največja hitrost vretena: 12.000 obr/min, Izvedena so bila naslednja popravila: Nsdszka Hispfx Altewi Ugotovljen in zamenjan pokvarjen pretvornik. Zamenjana ležaja v osi Y. Komplet ležajev VTXZ, os Y (5 kosov, 35x72). Nastavljeno vreteno (WZW). Nastavljena orientacija. TEHNIČNE PODROBNOSTI Hod osi X: 2.032 mm Hod osi Y: 660 mm Hod osi Z: 610 mm Hitrost vretena: 12.000 vrt/min Hlajenje vretena: notranje hlajenje Hitrost hitrega premika X/Y/Z: 35 m/min Moč: 18 kW Vpenjalna konica: SK 40 Število orodniških mest: 40 Premer orodja pri polni zasedbi: 75 mm Maksimalna teža orodja: 10 kg Maksimalna dolžina orodja: 300 mm Obremenitev mize: 2.700 kg Ploščina za pritrditev na mizi: 2.285 x 660 mm Število T-utorov na mizi po standardu DIN 650: 5 Širina utora za vpenjalno napravo: 18 mm H8 Razdalja med utori: 125 mm Natančnost pozicioniranja X, Y, Z: 0,02 mm Ponovljivost natančnosti X, Y, Z: 0,01 mm PODROBNOSTI O STROJU Ploščina postavitve Š x G x V, vrata odprta / s krmilnikom / transporter za odrezke: 6.950 x 5.150 x 3.700 mm Transportna teža: 20.000 kg Teža stroja: 18.000 kg Delovne ure: Ure delovanja stroja: 11.417 ur Ure delovanja vretena: približno 5.000 ur Naslednje ni vključeno v obseg dobave: primeži, orodja, sesalni sistem, voziček za orodja. Dodatne tehnične podatke najdete v priloženih dokumentih.

Stanje: rabljeno, Leto izdelave: 2004, obratovalne ure: 28.082 h, potovalna razdalja osi X: 800 mm, pomik osi Y: 620 mm, pomik po osi Z: 520 mm, model krmilnika: Siemens 840 D, največja hitrost vretena: 13.000 obr/min, Krmilnik (PCU 50) je bil zamenjan marca 2024! Vreteno stroja je bilo zamenjano pri približno 5.500 urah delovanja! TEHNIČNE PODROBNOSTI Hod osi X: 800 mm Hod osi Y: 620 mm Hod osi Z: 520 mm Število vrtljajev vretena: 13.000 vrt/min Število mest v orodjarniku: 30 PODROBNOSTI O STROJU Krmilnik: Siemens 840 D Delovne ure Ure vklopa krmilnika: 60.150 ur Ure vklopa stroja: 56.860 ur Ure delovanja vretena: 28.082 ur Nwsdpjzka Aksfx Altoi Menjava vretena pri: 5.500 urah OPREMA Orodja 4. os Hofmann RW/NC160 Naprava za sesanje oljne meglice Trakovni filter s notranjim hlajenjem 20 bar in dvojnim preklopnim filtrom Dokumentacija Hedelius + Siemens Sinumerik Infrardeči tipalo Renishaw

Stanje: dober (rabljeno), Leto izdelave: 2005, Deli, prikazani z roko, niso vključeni. Njdpfx Aozkkgmjltowi