Mbo Stroj Za Zgibanje nakup rabljenega (87.076)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Roller Coating Machine BÜRKLE easy coater RCL 12M and UV Curing System easy cure UV - TRUV with 2 Lamps and 2 x Roller Conveyors BÜRKLE easy coater RCL 1300: For single-sided coating of flat surfaces from above Operator side: left Touch screen control TP 177 Micro Rubber-coated applicator roller Hard-chromed dosing roller, finely adjustable via worm gear Controlled belt transport with exposed counter roller for reliable workpiece transport Quick-change system with split bearing and disc coupling for easy replacement of the applicator roller Oscillating doctor blade, quick and easy to replace for cleaning Separate, infinitely variable FU direct drives for applicator and dosing rollers as well as for the transport system Reversible dosing roller Motors and limit switches in explosion-proof design on the machine Control cabinet and operator panel in non-explosion-proof design, located outside the hazardous area of the machine Mobile version Electric provision for integrating the roller coating machine into a coating line Technical Data: Working width: 1300 mm Workpiece height: 3 - 80 mm Min. workpiece length: 400 mm Rubber-coated applicator roller diameter: 240 mm Chromed dosing roller diameter: 172 mm Conveying speed: 2 - 15 m/min, variable Connected load: approx. 2.4 kW Dosing roller speed: 1.0 - 3.0 m/min Working height: 900 mm (+/- 20 mm) Safety devices compliant with CE standards Incl. control cabinet Weight: approx. 1650 kg UV System e.a.s.y. cure UV - TRUV with 2 Lamps: Single-sided curing of UV-curable coatings on flat workpieces from above Incl. control cabinet Max. working width: 1300 mm Max. workpiece height: 80 mm Number of lamps: 2 (replaced 10/2023) UV lamp power: 120 W/cm² each Speed: 2 - 15 m/min, variable Transport: conveyor belt Exhaust duct: 2 x 250 mm Connected load: 39 kW Weight: approx. 750 kg 2 x Roller Conveyor RB 1300: Working width: 1300 mm Length: 4000 mm Kodpfxjt Dx U Se Akaodl Speed: 2 - 15 m/min, variable Connected load: 2 x 0.37 kW Total system length: 12,450 mm

Stanje: zelo dobro (rabljeno), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with separate motor approx. 0.2 kW Sanding belt dimensions: 3000 mm x 200 mm Front sanding table: 980 x 340 mm Kdodpouxqzuofx Akaol Rear sanding table: 750 x 300 mm Space requirement (L x W x H) approx.: 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table infinitely adjustable in angle Angle stop on the rear worktable Oscillation via geared motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic, adjustable belt tensioning Extraction with blower Possible attachment of feed device 2 side support tables for radius sanding Note on used machines: • Errors in technical details and prior sale excepted. • Quoted prices are ex works—free loading at location! • Machine has been cleaned and function tested. • All machines are sold as inspected, without any claim to warranty. Buyers are welcome to inspect machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Belt dimensions: 2600 x 150 mm Motor power (grinding belt): 2.2 kW Operating voltage: 3 x 400 V + PE / 50 Hz Grinding table height adjustable via handwheel Table size: 975 x 340 mm Height-adjustable grinding table for radii; size: 400 x 200 mm Sanding arm adjustable: 90° – 0° Extraction port: Ø 120 mm CE certified Required space (L x W): approx. 1600 x 725 mm Weight: approx. 320 kg Note on used machinery: • Technical specifications are subject to error and prior sale. • Listed prices are ex-site and ex-loading. • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any guarantee or warranty. Buyers are welcome to inspect the machines at site. Kdodpjtt Da Dofx Akaol • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and telephone number!)

Stanje: delavnici obnovljeno (rabljeno), Mortising machine, oscillating chisel mortiser MAKA Type DB 5 including numerous mortising tools – see photos Workpiece stop: 2 pcs Stop rail left/right: 2150 mm Workpiece blow-out: 2x Foot switch Pneumatic workpiece clamping, lateral: 1 pc Pneumatic workpiece clamping, from above: 2 pcs Extraction connection: D 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Technical specifications are subject to errors and prior sale. • Stated prices are ex location, free loading! Kdodpfx Akov Hm Nmoasl • The machines have been cleaned and function tested. • All machines are purchased as inspected, with no claim to warranty whatsoever. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid if made in writing. (Inquiries will only be answered with your address and phone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Torsion-free C-frame construction made from steel Standard heating system Disc system with tolerance compensation for different veneer thicknesses Regulation of heating output in stationary and mobile operation Thread breaking roller Throat depth: 920 mm Feed rate: approx. 20 m/min Veneer thickness: approx. 0.4 - 2.0 mm Operating voltage: 400 V, 50 Hz, 3-phase Total connected load: 0.97 kVA Includes gluing reel & operating manual Dimensions (L x W x H): approx. 1280 x 580 x 1470 mm Weight: 220 kg Note on Used Machinery: • Subject to technical changes and prior sale. • Stated prices are ex location - free loading! • Machines have been cleaned and functionally tested. • All machines are sold as inspected, without any guarantee or warranty claims. Kdodpfx Aksg Nn E Njael Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries containing your address & telephone number!)

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2007, številka stroja/vozila: CA90H2 PIPE BENDING ROLL, premer gredi: 90 mm, premer valja: 260 mm, vrtljajska hitrost (min.): 8 obr/min, največja hitrost vrtenja: 8 obr/min, skupna masa: 1.000 kg, skupna dolžina: 1.260 mm, skupna širina: 1.000 mm, skupna višina: 1.260 mm, moč: 3,68 kW (5,00 KM), vhodna napetost: 380 V, vrsta vhodnega toka: trifazni, obratovalna hitrost: 8 mm/s, premer valja: 260 mm, Oprema: dokumentacija / priročnik, nujno zaustavitev, PROFILBIEGEWALZEN, WELLEN-AUSGANG 90 MM – ROHRBIEGEWALZE MARGI CA90H2, BAUJAHR 2007 WELLEN AUSGANGSGRÖSSE: 90 MM SATZ UNIVERSALWALZEN, DURCHMESSER 260 MM SEITLICHE RICHTWALZEN LINKS/RECHTS, SCHRAUBENVERSTELLUNG Kdedowkrr Tspfx Akajl 4 WALZENSÄTZE FÜR ROHRBIEGEN: 61 – 78 – 90 – 116 MM KONSOLE ELEKTRISCH FAHRBAR AUF ROLLEN, ALLE BEDIENELEMENTE ZENTRALISIERT DIGITALE ANZEIGE DER WALZENPOSITION OBERE WALZE ANGETRIEBEN, ELEKTROMOTOR MIT GETRIEBE SEITENWALZEN HYDRAULISCH EINZELN VERSTELLBAR MIT KOLBEN MASCHINE REVERSIERBAR – BETRIEB MIT WELLEN VERTIKAL/HORIZONTAL MÖGLICH SICHERHEITS- UND NOT-AUS-AUSRÜSTUNG AN DER MASCHINE INSTALLIERT BEDIENUNGSANLEITUNG UND SCHALTPLAN IM ORIGINAL MIT DER MASCHINE GEWICHT: 1.000 KG ABMESSUNGEN: 1.260 X 1.000 X H 1.260 MM

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, delovna višina: 500 mm, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Lisec stroj za pranje stekla RTL-25VN, letnik 2007, smer dela levo/desno, s 6 ščetkami za Low-E steklo, vključno z enim rezervoarjem za toplo vodo, enim peščenim filtrom in enim puhalom. Stroj se dobavi z vhodnim trakom RTVN-32/25WE (dolžina 3,2 m) in izhodnim trakom RTVN-16/25ST (dolžina 1,6 m). Kedjy Sv Tkjpfx Akasdl Ščetke so glede na uporabo uporabne še najmanj 1-2 leti. Stroj je bil uporabljen le v manjši proizvodnji. Ker ima nekaj rjavih madežev, ga lahko ponudimo po ugodni ceni. Stroj je na voljo iz našega skladišča v Oroshazi, Madžarska.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Zelo dobro ohranjen stroj malo delovnih ur, Kontak možen tudi preko WatsApp, Govorimo Angleško Nemško in ex YU jezike. Strj se nahaja v Nemčiji. Vsa specifikacija mašine je v prilogi pdf Koder Idkwjpfx Akasdl

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, Odlično ohranjen stroj, trifazni priklop malo rabljen. Govorimo Angleško, Nemško in ex Yu jezike. Kontakt možen tudi preko WatsApp Kdjdpfx Aksy R Ep Eoasl

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, HOMAG EDGETEQ S-500 (OPTIMAT KAL 375/16/V25) Year of manufacture: 2022 Serial number: Excellent condition – used only for demonstration and sample production. Machine has been professionally maintained and is immediately available for inspection in Slovenia. Technical data and equipment: Continuously adjustable feed speed: 16–25 m/min Workpiece thickness: 8–60 mm Fixed fence on the left-hand side Working height adjustable Pre-installation for LOOPTEQ O-200/O-300 return system Kodpfx Akjxwuryeaedl Feed lock system Workpiece alignment at infeed with roller support Top pressure unit Sizing package with DIA joint trimming cutter set WD40 Gluing package with preheating up to 60 mm thickness Adhesive application system with emptying function Edge magazine with two vertical roll holders Pressure zone PERFORMANCE2 package End trimming unit PK25 Rough trimming unit BF10 (I-HM straight cutter set) Profile trimming unit FF32 top/bottom WD60 with FLEXTRIM quick-change system (2 radii) Multi-scraper MN21 automatic with profile knife set Cleaning agent spraying unit Glue joint scraper FA20 BASIC Buffing unit FP10 top and bottom PowerControl PC23 PowerTouch control system TAPIO Ready Ethernet network connection Wired manual control for setup operation Software package WOODCOMMANDER with MMR data logging, ToolManager, speed adjustment for track control, and full diagnostic functions Documentation in Slovenian (digital and paper format) Remote service enabled

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 23.905 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 600 kN, premer vijaka: 35 mm, delovna prostornina: 135 cm³, tlak vbrizgavanja: 2.221 letvica, odmični hod: 335 mm, skupna dolžina: 2.420 mm, skupna širina: 1.700 mm, skupna višina: 3.100 mm, skupna masa: 6.700 kg, Oprema: dokumentacija / priročnik, Prodajam vzdrževan stroj za brizganje ENGEL INSERT 200V/60 z le 23.905 delovnimi urami. Stroj je bil uporabljen izključno za vzorčenje. Ogled pod električnim tokom je možen kadarkoli! Tehnični podatki so vidni na slikah! Stroj je takoj na voljo! Kdjdpfx Asy Iwlaekaol

Leto izdelave: 1900, stanje: rabljeno, Rabljeni stroj A2/35”. Minimalni premer 80 mm, največji 900 mm. Minimalna dolžina hloda 180 cm. Kjdpewqmyfsfx Akasdl Cena velja za stroj v trenutnem stanju. Podajalne verige in verižniki so lahko obnovljeni ali dobavljeni z doplačilom.

Stanje: novo, Polirne krtače iz perlona 45/25x4 Ksdpfx Akoy R R H Neajdl

Leto izdelave: 2010, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Trimmer 2A is a CNC cleaning machine for PVC frame corners, featuring two interpolated axes and automatic cycle. When properly configured, it can check the dimensions of the workpiece. Equipped with a 275 mm diameter blade, it allows, through various machining programs, the cleaning of the external corner of different profiles. Trimmer 2A is also fitted with upper and lower units with knives for cleaning seams, as well as upper and lower units with knives for cleaning internal corners. The cleaning of internal and external corners can be completed using the upper and lower drilling/milling units, designed for cleaning corners or gasket seats. The working units can be programmed independently via a CNC PC, which controls the profile programming and the machine operation, either manually or automatically. Kjdpfow Hk T Uex Akasdl

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, obratovalne ure: 18.600 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 110, premer žaginega lista: 1.430 mm, korak zobnika: 110 mm, premer brusilnega koluta: 125 mm, vrsta vhodnega toka: trifazni, leto zadnje generalne obnove: 2026, vhodna frekvenca: 50 Hz, premer diska: 125 mm, odprtina brusnega koluta: 32 mm, moč motorja brusilnega vretena: 1.000 W, vhodna napetost: 400 V, skupna masa: 1.800 kg, moč hladilne črpalke: 100 W, število osi: 3, Stroj je bil tehnično prenovljen in nadgrajen za največji premer žaginega lista od 80 do 1430 mm. Model CEF350 je namenjen brušenju stranskih ploskev zob na krožnih žagah s HM rezili. Kodpfx Ajy Tpa Tokajdl

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, moč: 3 kW (4,08 KM), Oprema: dokumentacija / priročnik, funkcionalno obnovljeno - takoj pripravljeno za uporabo Kjdpfxjy Tpr No Akaodl

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.700 kg, Oprema: dokumentacija / priročnik, Univerzalni stroj COMEC RCG 900 za obnovo glav, blokov, bobnov in diskov osebnih in gospodarskih vozil. Širina obdelave: 320 mm Dolžina obdelave: 900 mm Največja delovna višina: 370 mm Največji hod mize: 1200 mm Pomik: 0,8 - 450 mm/min Največji premer zavornih bobnov: 1400 mm Glavni motor: 5,5 Hp Obrati za obdelavo zavor: 35-70-50-100 vrt/min Približna teža z dodatki: 1700 kg Kdedpfxsy Rffyo Akaol Dimenzije: 2300 x 790 x 1700 mm (V)

Stanje: dober (rabljeno), Leto izdelave: 2008, številka stroja/vozila: 082429, Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.260 kg, leto zadnje generalne obnove: 2025, Oprema: CE označba, SCM Olimpic K500 – Robna lepilka – Leto 2008 Naprodaj robna lepilka SCM Olimpic K500, letnik 2008, zanesljiv in robusten stroj, idealen za mizarska in industrijska dela. ✔️ Popolnoma delujoča ✔️ Pripravljena za uporabo, ne potrebuje posegov ✔️ Vzdrževanje vedno opravljeno skrbno ✔️ Odlično splošno stanje Stroj bo na voljo od junija. Popolna rešitev za vse, ki iščejo profesionalno robno lepilko, takoj pripravljeno za delo. Kedpfx Aoy Sph Iekaedl 📍 Možnost ogleda in preizkusa po dogovoru. 📞 Za več informacij nas kontaktirajte.

Stanje: novo, Zustanje novo Dobavni rok cca. 14 - 16 tednov od naročila Država izvora Turčija Cena 81.500 € Leasing obrok 1.540,35 € Maks. debelina pločevine – konstrukcijsko jeklo 8 mm Maks. debelina pločevine – nerjaveče jeklo 5 mm Maks. robni polmer 80 mm Kdsdpfxjyq Svko Akael Min. robni polmer 10 mm Maks. premer diska 4.500 mm Min. premer diska 720 mm Maks. višina roba 95 (R 80) / 35 (R 25) mm Motor 11 kW Dolžina 4.900 mm Širina 1.700 mm Višina 2.700 mm Teža 4.550 kg Vključuje robne valje za konstrukcijsko jeklo (R25) Vključuje rezila Ena hitrost (70 min⁻¹) z možnostjo nastavitve največjega navora Pogonski zgornji in spodnji valj z neodvisnimi hidravličnimi motorji ter planetnim reduktorjem Možno obdelovati ravna in konveksna dno Hidravlično nastavljiva višina dna Postopek rezanja in robljenja na istem glavi Stranske podporne valje Upravljanje prek zaslona na dotik Možnosti kot so fiksni in nastavljivi nosilci stožcev, adapterji za manjše premere, rezila za nerjaveče jeklo ali večje hitrosti … po povpraševanju.

Stanje: novo, Leto izdelave: 2026, Working width: 400 mm Working height: 300 mm Minimum workpiece length: 250 mm Units: 2 brush units, individually adjustable Kjdpei Hpk Uofx Akasdl 1st brush: Scotch Brite Medium / Diameter 220 mm, variable speed drive 2nd brush: Scotch Brite Hard / Diameter 220 mm, variable speed drive Height adjustment: Handwheel Height display: Mechanical counter Feed speed: 4 - 12 m/min Brush motor power: 2 x 3 kW / both with variable speed drive (infinitely adjustable) Feed motor power: 0.37 kW Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

Stanje: novo, Leto izdelave: 2026, Working width: 400 mm Working height: 300 mm Minimum workpiece length: 250 mm Units: 2 brush units, individually adjustable Brush lift height: 25 mm with pneumatic damping 1st brush: Metal brush, diameter 220 mm 2nd brush: Tynex brush, grit 80, diameter 220 mm Reversible operation: both brushes Height adjustment: Handwheel Height display: Mechanical counter Feed speed: 4 – 12 m/min Brush motor power: 2 x 3 kW Feed motor power: 0.37 kW Machine length: 1400 mm Machine width: 900 mm Kjdpfx Aji Ezrzokajdl Weight: 500 kg

Stanje: novo, Leto izdelave: 2026, Working width: 600 mm Working height: 220 mm Minimum workpiece length: 250 mm Units: 4 1. Saw cut unit (Random System): Saw cut optic Kdedpfshwrp Rsx Akajl 2. Brush: Metal, diameter 220 mm 3. Brush: Tynex grit 60, diameter 220 mm 4. Brush: Tynex grit 120, diameter 220 mm Height adjustment: Handwheel Height display: Mechanical counter Feed speed: 4 - 12 m/min Motor power, saw roughing unit: 1.1 kW Motor power, brushes: 4 kW Motor power, feed: 0.37 kW Machine length: 2,800 mm Machine width: 1,500 mm Machine height: 1,600 mm Weight: 1,500 kg

Stanje: novo, Leto izdelave: 2026, Nova brusilni stroj za dolge nože z vrtljivim magnetom, dolžina 2000 mm Ksdpfxey Smx Do Akasdl

Leto izdelave: 2021, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Curioni Sunmaster 350, leto 2021, v zelo dobrem delujočem stanju, v redni proizvodnji. Kedpfx Aey Rr R Askajdl

Stanje: rabljeno, Leto izdelave: 1985, Rabljeni stroj Kodpfx Akswka Hfoaedl Leto izdelave: 1985 Oprema in tehnični podatki: - Za konstrukcijske izvrtine horizontalno in vertikalno - Za vrtanje vrst lukenj vertikalno z razmakom 32 mm - Vertikalni vrtalni agregat z dvo-vretenskimi glavami, prosto pozicioniranimi na indeksni osi - Motor 1,5 kW s 1400 vrt/min - Motor 1,5 kW s 2800 vrt/min - Vrtalne glave s pnevmatskim pomikom - Pnevmatski vpenjalci materiala - Prehodna širina pribl. 850 mm - Vključno z različnimi omejevalniki in svedri Razpoložljivost: takoj Lokacija: Röllbach