Lindner Recyclingtech Gmbh Jupiter 1800 nakup rabljenega (70.287)

Leto izdelave: 2013, stanje: rabljeno, Proizvajalec: PAUL VON DER BANK GMBH, Tip: Robotska varilna naprava, Leto izdelave: 2013, Serijska št.: 13.536, Varilni vir, proizvajalec Fronius, tip CM TransPuls Synergic 4000, Hladilna naprava, Varilna enota VR7000CMT, Programirni terminal RCU5000I, Obratna miza, Varilni robot, proizvajalec KUKA, tip KR5-2ARC, Robotska krmilna enota KRC4, Odsesovalna naprava, proizvajalec Plymovent – naprava ni priključena Ksdpfx Ajyx Exvsqqelt

Stanje: rabljeno, Technical Data – Input Hopper with Hydraulic Walking Floor and Bag Opener for Recyclables from Yellow Bags and Commercial Waste: Manufacturer: BRT HARTNER GmbH Model: HP5-3035 Year of manufacture: 2015 Hopper volume: 30 m³ Drive power: 17.5 kW Dimensions (current state): 13,200 x 3,050 x 4,350 mm (L x W x H) Klsdpfxsy S Rw Dj Aqqet Machine Condition: The input hopper with bag opener was previously used at a large recycling facility, where recyclables from yellow bags or commercial waste were loaded into the hopper by wheel loaders. The bags were opened by the bag opener, with the recyclables either fed into a sorting plant or commercial waste transferred for further processing in a metered manner. The system operated flawlessly until it was dismantled and replaced with a larger unit with higher throughput capacity. The machine was disassembled into individual components in our workshop, partially refurbished, reassembled, and tested under operating conditions. The following refurbishment work was carried out and the following spare parts were replaced: - Disassembly of input hopper and bag opener into individual components; cleaning, partial sandblasting, priming, and painting of steel parts. - Various wear and cover plates were newly fabricated and installed. - Removal of worn ends (approx. 40 cbm) of walking floor tubes. Welding and smoothing of new tubes. - Complete replacement of the sliding plastic plates for the hydraulic walking floor. - Removal of the hydraulic unit from the walking floor, draining of the hydraulic oil tank, replacement of oil filters, refill with new hydraulic oil. - Renewal of all three hydraulic blocks, all valves, sight glass and all hydraulic hoses from the hydraulic unit. - On all three walking floor hydraulic cylinders, the seal sets and hydraulic hoses were replaced. - All six end switches (proximity sensors) of the walking floor were replaced. - The conveyor chains on both left and right sides of the drag chain conveyor were renewed. - Seven driver slats of the drag chain conveyor were replaced. - The drive motor of the tearing discs was replaced. - All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and fittings were renewed. - All sliding plastic plates for the hydraulic adjustment of the bag opener were replaced. The bag opener can be moved in depth to allow the system to be used for commercial or residual waste without utilizing the bag opener. - On both sides, the lateral collision protection plates were replaced. - Various wear parts of the bag opener were replaced. - The entire system was electrically rewired and connected. - The system control in the switch cabinet was retrofitted by BRT Hartner to autonomous single control and the standard program was reinstalled into the control system. - The system was commissioned and tested by BRT Hartner, see the function video. Notes: Documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is available. Inspection by appointment. We accept no liability for technical information or possible errors.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2019, obratovalne ure: 3.000 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 70 t, leto zadnje generalne obnove: 2025, Technical Data Baling Press / Can Press / Sheet Metal Press: Manufacturer: unoTech GmbH Model: UPAXX 70 Year of manufacture: 2019 Operating hours: approx. 3,000 hours Pressing force: 700 kN at 315 bar Klsdsy S Rv Tjpfx Aqqet Feed opening chute: 420 x 1,250 mm (D x W) Channel cross-section (bale size): 350 x 500 mm (H x W), length depends on material Drive power: 30 kW Connected load: 40 kW Total current consumption: 70 A Processing capacity for empty beverage cans: - One press stroke: approx. 1.7 t/hour - Two press strokes: approx. 2.5 t/hour Achieved compaction: approx. 1,200 kg/m³ Hydraulic oil tank capacity: 850 L Press dimensions (assembled): 8,000 x 1,600 x 2,500 mm (L x W x H) Transport weight of press: approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made from wear-resistant steel S355 Material suitability: According to the manufacturer, this machine is suitable for pressing tinplate cans, sheet metal scrap, steel sheet, as well as aluminum, brass, and copper waste. Condition of the baling press: The baling press has been completely overhauled in our workshop. The press is in very good condition – see functional video after refurbishment. During relocation of the machine, there was transport damage. The control cabinet was damaged and slightly dented by a forklift, and the main switch (on/off switch) was damaged. These damages are reflected in the significantly reduced sale price and must be repaired by the buyer at their own expense. Remarks: The complete documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available. Inspection possible by appointment. We accept no liability for technical details or possible errors.

Stanje: rabljeno, Leto izdelave: 2021, številka stroja/vozila: 7007490, Lastna teža: 14.300 kg, Dimenzije: dolžina: 6,9 m, širina: 2,5 m, višina: 2,55 m, Dimenzija zabojnika: 6,5 m, Številka drobilca: 103334 Klsdpfx Aqsy Rvlqeqst

Stanje: rabljeno, Leto izdelave: 2018, številka stroja/vozila: CS418-03-08, Lastna teža: 7900 kg, priključna moč: 15 kW, mere kontejnerja: dolžina: 6,5 m, širina: 2,3 m, višina: 2,64 m Kodpfx Aoy Rvmnoqqjlt

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Dressing Machine for Grinding Wheels: Simple manual operation, robust and precise Technical specifications: Kodpfoha Eh Hex Aqqolt Diamond grinding spindle: HSK-50 or as per customer request (e.g. SK-40, Perfect Arbor, etc.) Max. dressing wheel diameter: ø300mm Max. dressing wheel width: 20mm Max. grinding wheel diameter: up to ø250mm Grinding wheel speed: 0-1500 rpm (infinitely variable) Travel range left/right: 135mm Travel range forward/back: 135mm Dressing wheel diameter (silicon carbide): ø180x10xΨ32mm Approx. 98 degrees traversable on both sides Dressing wheel speed: 0-2800 rpm (infinitely variable) Oscillation frequency of dressing wheel: 0-50 cycles/min (infinitely variable) Dressing wheel oscillation stroke: 0-50mm (adjustable) X/Y axis optical scale resolution: 0.001mm Capabilities: profiling of radii, dressing multiple wheel sets Electrical connection: 380V, 50Hz, total power approx. 1.5kW DXF import included Camera system with live transmission via 23" monitor included Latest software generation GWDress-Studio with automatic AI measurement included

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, The GWDress-250 smartline is the intelligent solution for precise dressing of grinding wheels up to a diameter of 250 mm. Thanks to selectable manual or automatic control, dressing processes can be flexibly and highly efficiently configured. Performance Data: - Rotary and feed axes, CNC-controlled - Diamond grinding spindle: HSK-50 or per customer request (e.g., SK-40, Perfect Arbor, etc.) - Max. dresser wheel diameter: ø300 mm - Max. dresser wheel width: 20 mm - Max. grinding wheel diameter: up to ø250 mm - Grinding wheel speed: 0–1500 rpm (infinitely variable) - Range of motion, left/right: 135 mm - Range of motion, forward/backward: 135 mm - Dresser wheel dimensions (silicon carbide): ø180x10xΨ32 mm - Approx. 98 degrees traversable on both sides - Dresser wheel speed: 0–2800 rpm (infinitely variable) - Dresser wheel oscillation frequency: 0–50 cycles/min (infinitely variable) - Dresser wheel oscillation length: 0–50 mm (adjustable) - X, Y axis optical scale system: 0.001 mm - Capabilities: Profile dressing, disc pack dressing - Connection: 380V, 50Hz, total power approx. 1.5 kW - DXF import included - Camera system with live transmission to a 23" monitor included Kljdjw E E S Ajpfx Aqqet - Latest software generation GWDress-Studio with automatic AI measurement included - Country of origin: Austria

Stanje: rabljeno, Machine weight approx. 110 kg Space requirement approx. 950 x 435 x 980 mm The newly developed "mti inverter series" from ESS for single-phase welding machines, which has already proven itself thousands of times, is now being extended to a three-phase system. The combination of semiconductor technology, resonant inverter circuits, and classical transformer technology once again enables the integration of their respective advantages into state-of-the-art welding equipment. --> Technical data Mains connection: 3/PE AC 400 V --> Maximum primary power: 14 kVA --> Mains fuse: T 16 A --> Adjustment range: 5 - 300 A --> Stick electrodes: Ø 1.5 - 5 mm --> Protection class: IP 23 Klodpfxowf Rg Sj Aqqet --> Water cooling unit for the welding torch: integrated

Stanje: rabljeno, Leto izdelave: 2007, Machine weight approx. 290 kg Space requirement approx. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding machine designed for direct current welding (DC version) and for both direct and alternating current welding (AC/DC version), based on an innovative arc shaping process developed by Hermann GmbH. In practical use, the SHARC process achieves higher welding speeds while simultaneously improving weld quality and reducing ancillary welding costs (less distortion, improved penetration, reduced discoloration of the workpiece, lower hardening of the transition zones, and, if required, dispensing with additional filler materials). --> Technical data Welding current type: DC Mains voltage (50/60 Hz): 400 V Phases: 3 Adjustment range: 10 - 320 A Electrode adjustment range: 25 - 280 A Welding voltage: 22 V Open circuit voltage without HF: 70 V Open circuit voltage with HF: 90 V Primary power consumption: 23 kVA Duty cycle at 60%: 320 Duty cycle at 100%: 260 Cooling type: F Kedpfx Aqjwf Rg Ejqelt Protection class: IP 23

Stanje: rabljeno, Leto izdelave: 2007, Machine weight approx. 290 kg Space requirement approx. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for both direct and alternating current welding (AC/DC version), based on an innovative arc shaping process developed by Hermann GmbH. In use, the SHARC process results in higher welding speeds while simultaneously improving seam quality and reducing ancillary welding costs (less distortion, improved penetration, reduced discoloration of the workpiece, less hardening of the transition zones, and if required, the possibility to forgo filler materials). --> Technical Data Welding current type: DC Mains voltage (50/60 Hz): 400 V Phases: 3 Setting range: 10 - 320 A Setting range electrode: 25 - 280 A Welding voltage: 22 V Kodewf Rgxepfx Aqqolt Open circuit voltage without HF: 70 V Open circuit voltage with HF: 90 V Primary power: 23 kVA Duty cycle 60%: 320 A Duty cycle 100%: 260 A Cooling type: F Protection class: IP 23

Stanje: rabljeno, Leto izdelave: 2007, Machine weight approx. 290 kg Kjdpfxowf Rgrs Aqqjlt Space requirement approx. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding machine for direct current welding (DC version) and for both direct and alternating current welding (AC/DC version), based on an innovative arc shaping process developed by Hermann GmbH. In operation, the SHARC process enables higher welding speeds while simultaneously improving seam quality and reducing ancillary welding costs (less distortion, improved penetration, reduced discoloration on the workpiece, lower hardening of the transitional edge zones, and, if necessary, elimination of filler materials). --> Technical Data Welding current type: DC Mains voltage (50/60 Hz): 400 V Phases: 3 Adjustment range: 10 – 320 A Adjustment range electrode: 25 – 280 A Welding voltage: 22 V Open circuit voltage without HF: 70 V Open circuit voltage with HF: 90 V Primary power: 23 kVA Duty cycle 60%: 320 Duty cycle 100%: 260 Cooling type: F Protection class: IP 23

Stanje: novo, Leto izdelave: 2026, Enostavno vzdrževalna naprava za odstranjevanje prahu, posebej razvita za agresiven peskalni prah z predsobo s prizmatičnim ločevalnikom, v osnovi sestavljena iz: a) 1 kos kartušnega suhega filtra, tip PF 2.16.B250 za 30.000 m³/h (na voljo tudi druge velikosti) Sestavljen iz stabilnega, vakuumsko neprepustnega 3 mm jeklenega ohišja, razdeljenega na surovi plinski prostor s filtrskimi kartušami, filtrsko predsobo s prizmatičnim ločevalnikom in čistim plinskim prostorom s čiščenjem filtra z uporabo stisnjenega zraka, vsak z ločenimi servisnimi vrati Easy Open. Lijak za zbiranje prahu z režnim ventilom ali zvezdastim dozatorjem za odstranjevanje prahu z Big Bag vrečami. Krmiljenje magnetnega ventila z indikatorjem diferenčnega tlaka za optimalno nastavitev čiščenja filtrov. Kljdpsw Ivqmjfx Aqqot Servisna vrata kot nihajna vrata – enostavno vzdrževanje.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, pritisk: 6 letvica, trajanje garancije: 60 meseci, notranja širina: 5.000 mm, notranja dolžina: 10.000 mm, notranja višina: 5.000 mm, filtrirna površina: 250 m², volumenski pretok: 16 m³/h, Oprema: dokumentacija / priročnik, osvetlitev, Blast house *up to 5 years warranty* for all blasting media, constructed from a steel frame/insulated panels, with filtration system, recirculating air system, abrasive recycling, 200l pressure blasting pot with automatic refilling, blast hose with dead-man control, breathing air system, LED lighting, wall cladding with 70 shore 4mm fabric-reinforced rubber, sweeping pit with bucket elevator. Abrasive return via sweeping pit with bucket elevator, optionally upgradable to cross screw conveyor with metering hood spanning the full width as a sweeping pit or as a complete flat conveyor floor. Workpiece transport upgradeable: blast trolley with rail track, crane system, roof crane opening, etc. Kedou Ey Dljpfx Aqqjlt For glass bead blasting of stainless steel, upgradeable with appropriate magnetic drawer or electrically driven magnetic drum separator. For blasting with two different blasting media (ferrous and mineral), upgradeable with magnetic drum separator, final demagnetization stage, and second air sifter for media separation and cleaning. Safety features: emergency lighting with battery backup, emergency stop switches inside the cabin and outside, inspection window to blast chamber, gate/door end switches, dead-man control, pressure vessel quick venting. Warranty up to 5 years on selected components. 50 years of experience and more than 3,000 systems built in blast room engineering.

Stanje: novo, Leto izdelave: 2026, Shot blasting booth components: flat conveyor floor, cross screw conveyor, bucket elevator, air separator, screen, abrasive bunker, blasting machine, filter unit, fan, air ducts, lamella extraction wall, blast feed box, electrical control system supplied as a kit without installation. Alternatively, the system components can also be installed on your premises by our professional technicians. Kledpfxehc T Nle Aqqet

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Grinding Wheel Dressing Machine: Easy to operate, robust, and precise Our grinding wheel dressing machine with enclosure offers you an unbeatable combination of user-friendly operation and exceptional stability. The solid granite bed ensures maximum precision and durability, while the intuitive controls optimize efficiency in your workshop. Kjdpeubbrtjfx Aqqjlt While you continue production on your tool grinding machine, our dressing machine saves you both time and money. Ideal for anyone who values reliable performance and outstanding value for money!

Stanje: novo, naslednji pregled (TÜV): 09/2026, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 540 mm, skupna širina: 2.000 mm, velikost pnevmatike: 23x9-10, stanje pnevmatik: 100 odstotek, barva: oranžna, Leto izdelave: 2026, Platformni transportni voziček Nosilnost: 10.000 kg Kledpfxsit Twue Aqqot Dolžina nakladalne površine: 8.000 mm Širina nakladalne površine: 2.000 mm Višina nakladalne površine: 540 mm Transportno dno: 30 mm duglazija, poglobljeno in privijačeno Privezne oči na vsaki vzdolžni strani: 5 kosov Barva: RAL 2000 Vlečna ojnica z nastavitvijo višine in varovalom proti padcu Dvodelni podporni zagozd Superelastične pnevmatike 23x9-10 s kovinskim platiščem in stožčastim ležajem Vse-kolesno krmiljenje Sled in krmilne palice nastavljive z zgibnimi očesi

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Heavy-duty transport trailer with a payload of 8 tons on the loading platform. Dimensions: 6000 x 2400 x 900 mm with a turntable steering system on the front axle and a fixed trailing axle. Pneumatic tires 7.00-15. Equipped with an overrun brake and a parking brake on the steering axle. Transport floor made of 30 mm wood, or optionally 18 mm phenolic resin coated plywood for an additional €220. At the front (in the direction of travel) a 1000 mm high front wall with grille, 40 mm mesh size. Lashing points along the sides for securing the load. Optional lighting system available for an additional €980, including a spiral connection cable. Standard paint finish in RAL 2000; other colors available on request for newly manufactured units. Kledpfx Aqokzhqxjqjt

Stanje: skoraj kot novo (rabljeno), lastna masa: 2.300 kg, največja dovoljena obremenitev: 20.000 kg, skupna masa: 22.300 kg, naslednji pregled (TÜV): 11/2025, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.000 mm, velikost pnevmatike: 450x300, barva: oranžna, Leto izdelave: 2025, obratovalna teža: 20.000 kg, Težki transportni priklopnik z mero 5000 x 2000 x 610 mm. Nosilnost 20 ton pri 6 km/h. Krmiljenje z vsemi kolesi, osne čepne ročice z nastavljivimi sledilnimi palicami. Obloge 450 x 300 na jeklenih platiščih z obojestranskimi konusnimi ležaji. Vlečna os z kovanim vlečnim ušesom 40 mm in zavarovanjem proti izpadu. Transportno dno iz 40 mm smreke, utopljeno in privito. Na vsaki vzdolžni strani na okvir privarjene pritrdilne zanke za varovanje tovora. Na okviru nameščena dvodelna zagozda za kolesa. Klodpjn D D S Sefx Aqqjt

Stanje: novo, lastna masa: 3.400 kg, največja dovoljena obremenitev: 30.000 kg, skupna masa: 33.400 kg, dolžina tovornega prostora: 6.000 mm, širina tovornega prostora: 2.200 mm, velikost pnevmatike: 559x300, Leto izdelave: 2026, TPW 30 VL - LK Prednja os krmiljena preko obračalne šasije Kljdpfxohbmu Ij Aqqet Zadnja os tog Dolžina 6000 mm Širina 2200 mm Vlečna drog z varovalom proti padcu in nastavitvijo višine Kolesa z obročem 559x300 s kovinskimi platišči Na vsaki vzdolžni strani 5 omejevalnih blokov za pritrjevanje tovora Barva RAL 2000 modra Transportno dno iz lesa, 40 mm, vgreznjeno in privijačeno #Težki transport #Sistemi notranjega transporta #Težke prikolice 6-100 ton #Težke prikolice od 3 do 100 ton #Transportni platformni voziček za težke tovore #Platformne težke prikolice #Krmiljenje vseh koles #Transportni voziček

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, skupna masa: 150 kg, skupna višina: 2.300 mm, skupna dolžina: 1.200 mm, skupna širina: 600 mm, model krmilnika: SPS-Steuerung, delovna širina: 300 mm, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, priključek za stisnjen zrak: 6 letvica, nosilnost na stojalo: 50 kg, število predalov: 1, natančnost pozicioniranja: 1 mm, delovna višina: 30 mm, delovna dolžina: 400 mm, delovno območje: 400 mm, Oprema: CE označba, varnostna svetlobna zapora, Feeding and Buffering System for Lightweight Items in Workpiece Carriers. Tray feeding for magazine storage in automated production lines. Specifically designed for components sensitive to surface or contour. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm • Fast tray changeover time (4-8 seconds) • Max. tray weight including workpieces: 5kg • Max. tray stacker weight: 50kg • Positioning accuracy: ± 1mm • PLC control with operation and monitoring display • ESD equipment • Safety package: Leuze light curtain for tray stacker • AGV communication interface prepared – Siemens IWLAN Client • RFID read/write head • Increased autonomy time: 1 stack Kljdeyx Hgbspfx Aqqot • Machine safety: active door interlock • Compact footprint due to space-saving design • Flexible adaptation to various machines via different interfaces • Low investment costs • Fully equipped • Robust construction (solid steel frame, powder-coated) • No machine adapters required • Supply voltage 400V / 50Hz / 3ph • Minimum air pressure: 6bar • Dimensions: 1200 x 600 x 2300mm (L x W x H)

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 120 kg, skupna dolžina: 900 mm, skupna širina: 1.500 mm, skupna višina: 2.050 mm, vhodna napetost: 230 V, laserska moč: 30 W, valovna dolžina laserja: 1.064 nm, natančnost ponavljanja: 0,01 mm, vrsta laserja: vlakenski laser, Oprema: USB priključek, osvetlitev, The universally applicable LAS 28 XLe laser marking system by Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. The integrated fiber laser allows you to mark almost any material, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software automatically increments serial and item numbers after initial setup. Additionally, the software can import data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. The use of a handheld scanner is also possible. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as side cantilevers for marking long parts, movable Z-axis, drawer systems, etc., are available upon request. Made in Germany Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength: 1064 nm • Marking field size: 150x150 mm (larger optional) • Marking software EZCAD in German/English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: autofocus system – automatic focus distance determination • Optional: extraction unit (including activated carbon filter) • Pilot laser (easy preview, contour preview) • Focus finder (easy focus adjustment) • Signal tower for operating status display • Max. component height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • IPS PCAP touchscreen and height-adjustable keyboard platform • Aluminum profile frame • Air-cooled • Door width approx. 700 mm / door height (pass-through): 400 mm • Connection: 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg Klsdpeyxccrofx Aqqot

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, položaj glave za glodanje: mittig, največja hitrost vretena: 60.000 obr/min, skupna višina: 1.550 mm, skupna dolžina: 1.870 mm, skupna širina: 1.040 mm, največja hitrost vrtenja: 60.000 obr/min, vrsta vhodnega toka: trifazni, skupna masa: 560 kg, delovno območje: 420 mm, trajanje garancije: 12 meseci, vrsta pogona: Linearmotor, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Semi-automatic depaneling / Base machine with parallel shuttle The dynamic depaneling machine LOW 4322 is specifically designed for medium to high product volumes and meets the growing demands of the production process. PCB panels made of various materials are separated with maximum product flexibility, precision, and throughput using dust- and stress-minimizing sawing and milling techniques. Highly dynamic linear motor axes, tools, and grippers meet the highest quality standards, guaranteeing the depaneling machine superior durability and reliability. Semi-automatic depaneling – Solutions tailored to your needs The LOW 4322 allows for fast product changeovers while maintaining short separation and handling times. Panel loading is carried out via a parallel shuttle, with pick-up and fixation via pin clamping technology, and, if required, in combination with vacuum suction cups. Made in Germany The machine is equipped with: • A shaft and disc tool separation module on the Z-axis (automatically rotatable 0-90°) • X-Y cross table module with linear motor technology and high-resolution measuring system • Dual loading module designed as a parallel shuttle, separate left and right with sliding doors Ksdpfxjxt Dk Re Aqqslt • Profile frame with two maintenance doors – left and right, ESD compliant • Standard vision system base module for teach-in programming • Working area of 420 x 330 mm per side • Automatic cutter length compensation • Remote maintenance/support via remote connection • Touch IPC with Windows operating system • Laser axis measurement including protocol • Air ionization • Cutter breakage control for slot cutters only • Prepared for vacuum clamping technology • Disc and sliding doors ESD compliant An optional dust extraction unit can be offered retrofitted if needed.

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, skupna širina: 600 mm, skupna dolžina: 1.200 mm, skupna višina: 2.300 mm, skupna masa: 150 kg, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, delovno območje: 400 mm, višina izdelka (maks.): 30 mm, model krmilnika: SPS-Steuerung Siemens Simatic HMI, vhodna frekvenca: 50 Hz, priključek za stisnjen zrak: 6 letvica, nosilnost na stojalo: 50 kg, natančnost pozicioniranja: 1 mm, Oprema: CE označba, dokumentacija / priročnik, osvetlitev, varnostna svetlobna zapora, Feeding and Buffering System for Lightweight Items in Workpiece Carriers. Tray feeding for magazine storage in automated production lines. Specifically designed for components sensitive to surface or contour. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm • Fast tray changeover time (4-8 seconds) • Max. tray weight including workpieces: 5kg • Max. tray stacker weight: 50kg • Positioning accuracy: ± 1mm • PLC control with operation and monitoring display • ESD equipment • Safety package: Leuze light curtain for tray stacker • AGV communication interface prepared – Siemens IWLAN Client • RFID read/write head • Increased autonomy time: 1 stack • Machine safety: active door interlock • Compact footprint due to space-saving design • Flexible adaptation to various machines via different interfaces • Low investment costs • Fully equipped • Robust construction (solid steel frame, powder-coated) Kodpsyx Hrkofx Aqqolt • No machine adapters required • Supply voltage 400V / 50Hz / 3ph • Minimum air pressure: 6bar • Dimensions: 1200 x 600 x 2300mm (L x W x H)

Stanje: novo, Leto izdelave: 2025, Plasma cutting system for tubes and profiles Kledpfx Aqsgu Nmhjqet Machines for plasma cutting of pipes and profiles. The cutting contour is defined and created using CAM software. The generated CNC code is then transferred to the machine via USB or network. The program can be easily accessed via the 12" touch display. After the workpiece is manually loaded, the automatic cutting process is started. - Pipe length: max. 6000 mm - For round pipes up to max. OD=220 mm - For square tubes up to max. 152.4 x 152.4 mm (6" x 6") - Maximum pipe weight: 250 kg - 4-jaw chuck - Side loading possible, secured with light curtain - Fully automatic cutting process - Industrial PC control with 12" touch display - Data import via USB and LAN - Power consumption (machine): 400V 3P 2KW - Dimensions: 690 x 100 x 180 cm - Weight: approx. 1000 kg Made in Germany The pictures show an older machine.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Plasma cutting system for pipes and profiles Machines for plasma cutting of pipes and profiles. The cutting contour is defined and created via the CAM software. The generated CNC code is then transferred to the machine via USB or network. The program can be accessed easily via the 12" touch display. After manually loading the workpiece, the automatic cutting process is started. - Pipe length: max. 6000 mm - Suitable for round pipes up to max. OD = 150 mm - Suitable for square pipes up to max. 101.6 x 101.6 mm (4" x 4") - Maximum pipe weight: 150 kg - 4-jaw chuck - Side loading possible, secured by light curtain - Fully automatic cutting cycle - Industrial PC control with 12" touch display - Data import via USB and LAN - Power supply for machine: 400V 3-phase, 2 kW - Dimensions: 690 x 100 x 180 cm - Weight: approx. 800 kg Klsdpfog Dvdcjx Aqqjt Made in Germany The pictures show an older, larger machine.