Kyffhäuser Maschinenfabrik Separator nakup rabljenega (6.305)

Leto izdelave: 2026, stanje: skoraj kot novo (rabljeno), Dozator veziva / trosilnik apna, rabljen iz kratkega najema. Dozator ima integriran sistem tehtanja z zaslonom, 18V akumulatorski sistem je od Makite, zato je neodvisen od kakršnegakoli zunanjega vira energije. Nameščena je glava OilQuick 70/55, lahko pa se zamenja. Za vprašanja sem na voljo. Lep pozdrav, Jürgen Wolf Za bagre od 15 t naprej Potrebna povratna oljna povezava: 0 Rsdpfxjyupyne Apbsu

Stanje: skoraj kot novo (rabljeno), Tip: za META Clip vtične regale Velikost: Za 30 cm globoke regale Višina: 15 cm Površina: pocinkano Cena: 30 cm 1 EUR/kos 50 cm je že prodano. Regalni razdelilnik ali organizator regala je praktičen pripomoček za shranjevanje, s katerim lahko police razdelite na manjše predele ali oddelke. Redpfx Ajm Dr Txspbju Ti elementi služijo predvsem ustvarjanju reda in preglednosti za različne predmete – kot so knjige, dokumenti, posoda, oblačila ali pisarniški material. Dostava: Prosimo, za povpraševanje o stroških pošiljanja navedite svojo poštno številko, kraj in želeno količino artiklov. Druge storitve: Načrtovanje, montaža/demontaža regalov, odkup/prodaja. Spremembe in napake v tehničnih podatkih, informacijah in cenah ter vmesna prodaja so pridržane!

Stanje: dober (rabljeno),

Stanje: rabljeno, Leto izdelave: 2021, skupna višina: 1.800 mm, skupna dolžina: 1.200 mm, skupna širina: 1.000 mm, skupna masa: 150 kg, dolžina cevi: 10.000 mm, potrebna višina: 1.800 mm, zahteva za prostor dolžina: 1.200 mm, potrebna širina: 1.000 mm, transportna dolžina: 1.200 mm, transportna širina: 1.000 mm, transportna višina: 1.800 mm, kapaciteta rezervoarja: 50 l, No. 04521 Cyclone Pre-Separator ESTA ZA 50 Unused, year of manufacture 2021, in mint condition Filter relief for very large quantities of dust The stationary cyclone pre-separators are installed upstream of the main filter unit and serve to pre-separate dry and free-flowing dusts. Medium and coarse dust particles are already separated in advance, leaving only fine dust to be filtered. This reduces the operating costs for the entire extraction system. Cyclone pre-separators achieve a separation efficiency of over 90% for medium grain sizes of at least 150 microns. Upper cyclone diameter: 282 mm Cyclone height: 1,458 mm Dust container: 50 liters Upper pipe connection diameter: 50 mm Rjdjx Upqhspfx Apbsu Container pipe connection diameter: 82 mm Incl. approx. 10 m extraction hose, diameter 50 mm Transport dimensions approx. 1200 x 1000 x 1800 mm (LWH) Weight approx. 150 kg To avoid possible misunderstandings, on-site inspection by appointment is possible and recommended. The sale is made as-is. Technical data, condition description, year of manufacture, and scope of delivery as per manufacturer’s brochure and/or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded. The following applies: "purchased as inspected." Terms of payment: Prices plus statutory VAT. Payment before collection or dispatch. Delivery terms: ex stock.

Stanje: dober (rabljeno), Leto izdelave: 1991, številka stroja/vozila: 1698 250, proizvodna zmogljivost: 30.000 enota/h, Separatorski stroj za smetano iz mleka, zmogljivost: 30.000 litrov na uro. Vključno z vsemi orodji za vzdrževanje. Rsdpfoxxyc Tjx Apbsu

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, proizvodna zmogljivost: 5.000 enota/h, Baktufuga, samodejno čiščenje. Vključuje boben, hitrost vrtenja bobna: 6.255 vrt/min, pokrov motorja, osnovni okvir, pnevmatski protitlačni ventil za mleko, indikator pretoka in ročni ventil za regulacijo pretoka za baktofugat z remiksom v dovod. Set manevrskih vodnih ventilov. Motor 7,5 kW – 15 A – 1.445 vrt/min. 5 orodij: obročni ključ in dvižna naprava vključeni. Prostostoječa nadzorna plošča z Westfalia krmiljenjem. Skupne dimenzije: 145x100x150 (d x š x v) – teža: 497 kg. Rjdpfx Apoyzxaxsbju

Leto izdelave: 2016, stanje: skoraj kot novo (rabljeno), Die benutzerfreundlichen Hauptkomponenten des CliniMACS Plus Instruments bieten anspruchsvolle Anwendungen für eine Vielzahl von Separationen. Die selektierten Stammzellen, Monozyten, DCs, NK-Zellen, B-Zellen sowie T-Zell-Subpopulationen ermöglichen Forschungen in den Bereichen regenerative Medizin, adoptive Immuntherapie und Transplantat-Engineering. Vollständige Systemsteuerung über einen integrierten Mikrocomputer Automatisierte Zellseparation durch eine magnetische Trenneinheit mit sowohl beweglichem Permanentmagneten als auch Halterung für die Separationssäule Eine Peristaltikpumpe gewährleistet einen durchgängigen Fluss im gesamten Schlauchset Diverse Quetschventile unterstützen die Peristaltikpumpe bei der genauen Steuerung des Puffers und der Zellaufschlemmung Die magnetische Markierung der Zellen erfolgt im Cell Preparation Bag mittels antigenspezifischem Reagenz. Anschließend wird der Cell Preparation Bag mit dem CliniMACS Plus Instrument verbunden. Benutzerfreundliche Software unterstützt die Anreicherung bzw. Depletion der Zielzellen sowie deren abschließende Sammlung im Cell Collection Bag. Das CliniMACS System verarbeitet große Zellmengen und liefert Zielzellen mit hoher Reinheit und exzellenter Ausbeute. Redpfx Asiptzfepbsu Guter, funktionsfähiger Zustand. Bitte sehen Sie sich auch unsere weiteren Angebote an.

Leto izdelave: 2022, obratovalne ure: 2.896 h, stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Modello: Lepton 2100 Anno di costruzione: 2022 Ore vaglio: ca. 2896 h Ore motore: ca. 3486 h Ubicazione: D 84069 Schierling Disponibilità: a breve termine Dotazione: - Macchina base Lepton 2100 con primo piano vagliante (possibilità di aggiungere un secondo piano opzionale) Interasse primo piano vagliante: 70 mm - Carro cingolato - Pre-vaglio con tramoggia lunga e nastro acceleratore - Telecomando tramite radio per tutte le principali impostazioni - Azionamento diesel-elettrico da 80 kW - Livellamento - Peso totale 18.500 kg - Dimensioni di trasporto: lunghezza totale 11,97 m, altezza 4,10 m, larghezza 2,53 m Materiali vagliabili possibili: Compost, verde, biomassa, radici, legno di recupero, rifiuti generali, CDR (combustibile derivato da rifiuto), vari materiali da riciclo (non idoneo per inerti o terreno di scavo) Varie: Rodjwlt N Nopfx Apbeu Condizioni d’uso molto buone, completamente operativo Richiedi ulteriori informazioni

Stanje: novo, Efficient Extraction of Coolant and Lubricant Mists Directly at the Machine Tool The two standard units, AL-KO OIL JET 600 and OIL JET 1200, offer the perfect solution for directly extracting oil and emulsion mist from all common turning, grinding, and milling machines. Fields of Application: AL-KO OIL JET units are used wherever oil and emulsion mists arise during production processes on modern machining equipment and need to be extracted directly from the processing chamber. Depending on the size of the machining area, operating time, and the type of coolant used, either the OIL JET 600 or the higher-capacity OIL JET 1200 model is selected. AL-KO OIL JET units are suitable for all standard cooling and lubricating fluids and can be mounted directly onto the machine tool or placed next to it on an optional floor stand. Redpfx Apswwt Tljbsu Operating Principle: The highly effective filter system in AL-KO OIL JET units is equipped as standard with a three-stage filtration process that removes emulsion content and material particles from the extracted air. 1st filtration stage: washable metal mesh filter 2nd filtration stage: filter mat (LoTex®) with frame 3rd filtration stage: main filter cassette (ePM1 80%) The first stage captures coarse particles. The second stage consists of a drained, nano-coated mat that separates and channels off emulsified liquids. The third stage filters out the finest residual particles. The emulsions, predominantly separated in the second filter stage, are collected in the base of the unit and can be discharged. Applications: - Lathes - Machine tools - Chip-removal machines Advantages: - Compact design - High separation efficiency due to three-stage filtration system - Energy-efficient EC motors - Simple, tool-free filter replacement - Numerous options

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, For sale is a sorting plant set consisting of the following machines: 1. TRENNSO Circular Screener, price negotiable: €19,500 - Model: SIK 750/1800/4 - Year of manufacture: 2008 - Condition: used, fully functional - Operating time: approx. 400 hours, laboratory unit, used exclusively for trials - Including 4 screen decks 2. TRENNSO Density Separator Table, price negotiable: €9,500 - Model: TTS 300 / 1000 / 1 KV Redpfx Apoyh Huaobou - Year of manufacture: 2001 - Condition: used, little wear - Operating time: approx. 400 hours, laboratory unit, used exclusively for trials 3. TRENNSO Density Separator Table, price negotiable: €12,000 - Model: TTS 600 / 1000 / 1 KV - Year of manufacture: 2011 - Condition: as new, unused - Note: small dent, see photo Sales conditions: - Preferably sold as a set - Single sales possible on request - Offer excludes screens - Various screens available, €500 per screen deck Circular Screener Screens: • 0.35 mm • 0.71 mm • 1.0 mm • 2.0 mm • 3.0 mm • 4.0 mm • 5.0 mm • 7.0 mm • NSL 1.5 mm • NSL 3.0 mm • NSL 6.0 mm • NSL 9.0 mm • NSL 12.0 mm • NSL 16.0 mm

Leto izdelave: 2016, stanje: novo, številka stroja/vozila: DMPMP260x104x41,5, Plate magnet in NdFeB neodymium design 260 x 104 x 41.5 mm fully welded housing 4 pieces of M8x20mm threaded holes Edge distance: 40mm -BHmax: 263-279 kJ/m³ Br: 1170-1210, JHc: > 955 kA/m Maximum operating temperature: 80°C This is surplus production that was no longer accepted by the customer. More than 10 units available. Redpfx Apjc Tctkebju

Leto izdelave: 2022, stanje: novo, številka stroja/vozila: 201811209, Inclined Conveyor / Angled Conveyor, Z-Type Conveyor incl. Overband Magnet Separator Magnetic Belt Inclined Conveyor + Overband Magnet Separator Complete Solution for Wood Chip Producers Aluminium Angled Conveyor with supporting frame incl. adjustable feet and machine feet for leveling Horizontal section: 3,000 mm Inclined section: 2,000 mm Angle at the bend: 45° Total conveyor length: 4,400 mm Discharge height: 1,600 mm Height of the horizontal section: 200 mm Belt width: 500 mm Drive drum + redirecting drum welded and machined from S235 steel Aluminum turning drum at bend, supported and crown-turned PU conveyor belt type DM 10/2 0+005 PU incl. corrugated sidewall, petrol matt Drive: Motor 1.1 kW, GEMOTEG, belt speed 0.3 m/sec Connection 230/400V, 50Hz, protection class IP54 Drive and all components ready to connect, motor included 2 pcs. sidewalls 40x35 mm T40 cleats, pitch 400 mm 2-ply, especially cross-stable Usable width 190 mm, defined as follows: Rodpedrdyyefx Apbju crosswise arrangement -70+35-190+35-70 mm

Leto izdelave: 2019, stanje: novo, številka stroja/vozila: 1C331151, Oil/water separator DONALDSON Ultrasep Superplus UFS-SP10 Nominal compressor capacity (based on 1 bar absolute and 20°C, depending on compressor design and lubricant): 120 m³/h Connection: G 1/2" Tank capacity: 25 litres Pre-adsorber volume: 0.9 litres Redpfodbwf Sjx Apbsu Effective activated carbon adsorber volume: 3.2 litres

Stanje: novo, Leto izdelave: 2024, številka stroja/vozila: 5.3495.0, Condensate treatment: New Kaeser oil/water separator Aquamat CF 6 Tested and certified condensate treatment: The Berlin Institute for Building Technology has tested and certified the operation of the AQUAMAT. In Germany, only condensate treatment systems certified by the Berlin Institute for Building Technology are approved. AQUAMAT condensate treatment systems provide processing according to the "state of the art" and offer legal compliance for operators. This ensures maximum safety for the user when treating compressed air condensate. The AQUAMAT significantly reduces disposal costs and contributes to environmental protection. High-performance filter material: Both the pre-filter and main filter cartridge are equipped with particularly high-performance filter material (no activated carbon). The upstream separation tank with preliminary separation by gravity further improves reliability and maintenance intervals (except for type CF3). Clearly visible alarm display: An alarm is triggered by a rising float, at which point the filters must be replaced. The reference turbidity tester allows the operator to regularly check the functioning of the AQUAMAT and, if necessary, arrange maintenance (recommendation: test function once per week). Clean filter replacement: With the practical carrying handles, the main filter cartridge can be easily pulled out and secured on the AQUAMAT housing for dripping. This allows for a clean filter replacement. Pre-soaking of the new filter is not necessary. Technical data: Maximum delivery volume for oil-cooled screw / rotary compressors and oil type in climate zone 2: Rjdpfjv Ta D Dsx Apbsu S-460; MOL; MOH; PAO; VCL: 3.8 m³/min VDL: 4.9 m³/min Maximum delivery volume for oil-cooled 1-/2-stage piston compressors and oil type in climate zone 2: PAO: 3.8 m³/min VDL: 4.9 m³/min Tank size (volume): 18.6 l Fill volume: 11.7 l Pre-filter: 4.7 l Main filter: 4.8 l Condensate inlet connection: 2 x DN10 Water outlet connection: DN10 Weight: 5.8 kg Dimensions W x D x H: 387 x 254 x 595 mm Visit our showroom in Erlangen. On more than 450 sqm of exhibition space, you will find a large selection of new and used compressors.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 220 V, Oprema: osvetlitev, Naprodaj je korona valjčni separator proizvajalca hamos, Tip: KWS 1010-1 - Leto izdelave: cca 1998 - Približno 500 obratovalnih ur Rodpfxjyhcqyo Apbeu - Uporabljen izključno za poskuse in testiranja, nikoli integriran v proizvodno linijo, temu ustrezno zelo malo obrabe - Tehnično delujoč Področje uporabe - Elektrostatična ločevanja - Uporaba v plastiki in recikliranju - Materialni preizkusi, proizvodnja Posebnosti - Robusten industrijski dizajn - Samostojen stroj z nadzorom - Idealno za laboratorije, razvojne oddelke ali pilotske naprave Prodaja kot videno Ogled mogoč po dogovoru

Stanje: rabljeno, Leto izdelave: 2014, Kersting Belt Conveyor, Conveyor Belt, Separator, Ejector, Placer GF 2880-510-400 RA2409 Technical data: Conveyor length (NL): 2880 mm Frame width (NB): 510 mm Belt width (GuB): 400 mm Height (BH): 780 mm infeed and 640 mm discharge Support legs: included Conveying speed (v m/s): Frequency inverter for stepless speed adjustment Drive: Drum motor Electrical data: 50Hz V380-500, kW 0.55 S1 Drive drum: Ø = 100 mm Return roller: Ø = 100 mm Package dimensions: (max 550) x (390...420) x (max 200) LxWxH Control and pneumatics included Food-grade with stainless steel design Optional available: Length adjustment (longer/shorter) Prices excl. VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to support you with the planning and implementation of your projects. Rjdpfx Apswkbfvebju We look forward to hearing from you. Best regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Stanje: rabljeno, Goudsmit separator kovin, rotirajoči magnet Dimenzije: 300mm x 300mm x 300mm Rjdpfoyykdysx Apbou Opremljen z 8 magnetnimi palicami Moč motorja: 0,18 kW, 22 obratov/min

Leto izdelave: 2018, stanje: novo, Permanent overhead magnet separator Type PEM2200 2200 x 1000 x 400 mm ===== 4x lifting eye bolts for suspension Rubber belt GB30 Rsdpfxod Dy S Ds Apbsu Magnet dimensions: 1200x500 mm

Leto izdelave: 2018, stanje: novo, For sale is a magnetic filter that has only been used once. Redsdzp R Tjpfx Apbsu Sealed. 9 magnetic filter rods, including cleaning function.

Stanje: novo, Leto izdelave: 2024, številka stroja/vozila: 20244051202, Aluminum Angle Conveyor with Subframe Rsdjg At Hbepfx Apbou including adjustable leveling feet and machine mounts to compensate for uneven surfaces Horizontal section: 1,500 mm Inclined section: 2,100 mm Incline angle at bend: 45° Discharge height: 1,700 mm Aluminum Construction - Reinforced double profile 90x45 mm Drive: Inline geared motor 0.55 kW, speed 0.3 m/sec Connection: 230/400V, 50Hz, protection class IP54 PU conveyor belt with corrugated sidewalls & cleats Belt width: 600 mm 2 pieces of corrugated sidewalls, height 50 mm, width 25 mm 24 pieces of T-40 cleats Belt material: 2-ply, particularly cross-stable Permanent Overbelt Magnetic Separator TYPE PEM1200 1200 x 550 x 200 mm 4x lifting eyes for suspension Drive: Inline geared motor GEMOTEG 0.18kW, speed 0.4 m/sec Connection: 400V, 50Hz, protection class IP54 Endless PU conveyor belt 7 x T20 cleats, high-frequency welded Magnet dimensions: 700 x 230 x 120 mm Our core competence is delivering exactly what the customer truly needs. We work together with our customers to develop customized, individual solutions and supply corresponding systems from our own manufacturing. Contact us by phone as well to find the right solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free, metal detection, neodymium, overbelt magnet, magnetic belt separator

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Permanent overband magnetic separator, Type DMPM1200 1,800 x 900 x 220 mm ===== Massive welded steel construction Frame welded and painted RAL 7016 (anthracite grey) Magnet dimensions: 1,200 x 500 x 180 mm Drive roller + deflection roller: S235 steel, welded and machined Rsdpfxstxn Ire Apbju Ø220 x 700 mm, crowned and precision-turned; shaft fixed with pillow block bearings. Drive: Flange-mounted gearmotor GEMOTEG 1.1 kW, speed 0.4-0.6 m/sec Connection: 400V, 50Hz, protection class IP54 Drive pre-wired to motor terminal box (commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU, black matt, 5.4 mm thick Belt width: 650 mm 9 pcs. TG-40 cleats, high-frequency welded Belt material: 3-ply, particularly cross-stable * Equipped with stainless steel Alligator fasteners RS125 Magnetic properties: Installed magnet core: Strontium Ferrite Y30 Bonded SfRe strontium hard ferrite magnet core enclosed in soft iron, ensuring a very high permeability. Housing tightly sealed and encapsulated with 1.4301 stainless steel plate and pole shoes.

Leto izdelave: 2021, stanje: novo, Complete solution for the transport of bulk materials as well as demetallization of magnetic metal contaminants. Rjdjhh A Iyjpfx Apbou Aluminum incline conveyor belt including substructure Incline start area at ground level (adjustable) Discharge height: 1800 mm (adjustable) Construction: height-adjustable Structure includes suspension for overhead magnetic separator DMPM1200 Conveyor belt width: 500 mm (adjustable) We supply our conveyor belts in PVC, PU, or rubber. PVC conveyor belt including carriers and wave edge Drive: 0.25 kW motor (adjustable), speed 0.3 m/s Power supply: 220/240V, 50Hz, protection class IP54 Drive and components ready for connection, motor control optional 6x height-adjustable machine feet for alignment Wave edge: 40x35 mm T-20 cleats - 400 mm spacing 2-ply construction for exceptional transverse stability Our core competence lies in supplying customers exactly what they need. We work hand in hand with our clients to develop customer-specific, individual solutions and provide tailored systems from our own production. Feel free to contact us by phone to find the right solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separators, overhead magnetic separators, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overhead magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, grate magnets, metal separators, block magnet, filtration systems.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2024, Permanent Overband Magnetic Separator Type: DMPM1400 2,000 x 900 x 220 mm ===== Robust welded steel construction Structure welded and painted RAL 7016 (anthracite grey) Magnet dimensions: 1,400 x 500 x 180 mm Drive pulley + return pulley made of S235 steel, welded and machined Ø220 x 700 mm crowned finish, shaft fixed with bearing blocks. Drive: Flange-mounted geared motor GEMOTEG 1.1 kW, belt speed 0.4–0.6 m/sec Connection: 400V, 50Hz, protection class IP54 Drive prewired up to the motor terminal box (commissioning must be performed by a qualified electrician) PU conveyor belt, DM 20/2 0+010 PU black matt, thickness 5.4 mm Conveyor belt width: 650 mm 10 pcs TG-40 cleats, high-frequency welded Belt material: 3-ply, especially cross-stable * equipped with stainless steel Alligator connectors RS125 Magnetic properties: Installed magnet core: Strontium Ferrite Y30 Bound SfRe strontium hard ferrite magnet core encased in soft iron, ensuring very high permeability. Rjdpehun U Usfx Apbou Enclosure tightly sealed and encapsulated with 1.4301 stainless steel plates and pole shoes. Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator Our core competency is delivering precisely what the customer really needs. Together with our customers, we develop and deliver bespoke, customer-specific solutions manufactured in-house. Feel free to contact us by phone as well to find the ideal solution for your application.

Leto izdelave: 2019, stanje: zelo dobro (rabljeno), Plate Magnet, Lifting Magnet, Overband Magnet, Police Magnet, Magnetic Filter, Magnetic Separator Overband Plate Magnet Design in stainless steel (VA 1.4301), fully welded NEODYMIUM MAGNET CORE, extremely high adhesive force! Dimensions: 620 x 520 x 200 mm 4 x M16 eye bolts on the rear side This lifting magnet was previously used by one of our customers as a "police magnet" in the meat processing industry. The stated price refers to 1 unit. Currently, 1 unit available for immediate delivery from stock! All information without guarantee, offer valid while stocks last! Rjdpfx Aohuphrjpbeu Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator Our core competence lies in delivering exactly what the customer truly needs. We cooperate closely with our customers to develop customized, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone as well to find the right solution for your application. Overband Plate Magnet Design in stainless steel (VA 1.4301), fully welded 420 x 420 x 200 mm 420 x 420 x 250 mm 620 x 420 x 200 mm 620 x 520 x 200 mm 820 x 520 x 200 mm 820 x 520 x 250 mm Fully welded stainless steel housing to protect the magnet core Lifting eyes for suspension Cleaning drawer for easy removal of collected contaminants. Can be mounted above all types of conveyor systems...

Leto izdelave: 2021, stanje: novo, Overband Plate Magnet from Surplus Stock / Overstock Design in stainless steel grade 1.4301, fully sealed. For sale is a plate magnet with threaded holes on the rear side. The magnet can either be installed as a "police magnet" or used for extracting metal contaminants above a conveyor belt. Lifting eye bolts for suspension are included. Rjdpfxsfktk He Apbeu Magnet block dimensions: 620 x 420 x 250 mm Only 1 unit available for immediate delivery. Many other dimensions available from stock.