Kraussmaffei New Mc5/Mc6 Krauss Maffei Touch Panel 12-200-1922-K Operator Panel1922-K nakup rabljenega (86.491)

Stanje: pripravljen za uporabo (rabljen), Rabljeni stroj Brizgalni stroj Proizvajalec: Krauss Maffei KM 80 C1 Letnik: 2000 Na zalogi je le še 1 stroj Ni dobavnega roka, takoj dobavljivo Ogled možen po predhodnem dogovoru Stroj ni več priključen na elektriko / noben priključek za hladilno vodo Stroj je strokovno uskladiščen Tehnični podatki: Zapiralna sila (kN): 800 kN Pritrdilna plošča (mm): 610×610 Razdalja med stebri (mm): Vgradna višina (mm): 250 Odprtina med ploščami (mm): 750 Krmiljenje: MC4 Zaslon v nemškem jeziku (ni mogoče spremeniti v druge jezike) Brizgalna enota Ncodpfxsu Ti Srs Ah Uot Premer polža (mm): 45 Brizgalni tlak (bar): 1878 Prostornina hoda (cm³): 275 Moč pogona črpalke (kW): 18,5 Grejna moč (kW): 13 Polnjenje olja (l): 270 Dimenzije (m): 4,3 x 1,4 x 2,1 Skupna masa: 3,2 t Dodatne fotografije na zahtevo.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Stock no. 13602 Manufacturer: Krauss Maffei Machine type: KM 650 – 8000 CM Year of manufacture: 1997 Operating hours: 80,000 h Control type: MC 3-F Screen language: German Location: D-52249 Eschweiler Nodpfoub S R Hsx Ah Uect Clamping Unit: Clamping force: 6,500 kN Maximum mold opening force: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Mounting platen size (H x V): 1,704 x 1,700 mm Clear distance (H x V): 930 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 600 mm Maximum opening width: 1,750 mm Ejector stroke: 250 mm Ejector force fwd/rev: 226 kN Injection Unit: Screw diameter: 130 mm L/D ratio: 20 Injection pressure: 1,296 bar Stroke volume: 6,172 ccm Shot weight (PS): 5,617 g Injection flow rate: 1,540 ccm/s Screw speed: 138 rpm Plasticizing throughput: 238 g/s Nozzle contact force: 246 kN Electrohydraulic Equipment: Pump motor rated power: 132 kW Installed heating capacity: 70 kW Cylinder heating control zones: 7 Dimensions and Weights: Space requirement approx.: 12.00 x 2.80 x 2.70 m Total weight: 43,000 kg Accessories: - Vibration damping elements Additional Equipment: - 1 x air valve - 2 x hydraulic core pulls on BFAP - 2 x hydraulic core pulls on FFAP - 8 x hot runner controllers - Robot interface according to Euromap 67

Leto izdelave: 2002, stanje: pripravljen za uporabo (rabljen), Clamping force: 2500 kN, clear tie bar spacing: 630 mm/630 mm, opening stroke: 1150 mm, minimum mold installation height: 330 mm, screw diameter: 60 mm, specific injection pressure: 2000 bar, max. shot volume: 670 cm³, connected load: 74 kW, control system: MC4. Machine dimensions: 5700 mm / 2200 mm / 2300 mm, machine weight: 12.5 t, operating hours: 47,572 h. Available from February 2025, including special accessories: Krauss Maffei LRX-S 100, 8 hot runner controllers, 4 core pulls, blow-out unit, pressure accumulator, hydraulic tie bar withdrawal device, energy saving mode, ALS interface, 20 mA interface, and color dosing device interface. On-site inspection possible, documentation available. Ncjdpfx Ahsuiykds Ust

Leto izdelave: 1999, stanje: pripravljen za uporabo (rabljen), Na voljo je dvokomponentni brizgalni stroj Krauss Maffei Multinject. Zapiralna sila: 3500kN, dimenzije plošč X/Y: 1280mm/1190mm, drugi agregat: 390CZ. Dimenzije stroja X/Y/Z: pribl. 6300mm/2000mm/3100mm, teža: pribl. 17000kg, krmiljenje: Krauss Maffei MC4, obratovalne ure: 78424h. Krmiljenje je v okvari. Dokumentacija je na voljo. Ogled na lokaciji je možen. Ncsdpfx Aexx Uf Aeh Ust

Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), Clamping force: 1,500 kN, screw diameter: 50 mm, tie bar spacing: 500 mm, platen dimensions X/Y: 780 mm / 790 mm, opening stroke: 600 mm, daylight: 900 mm, ejector stroke: 150 mm, shot volume: 305 cm³, shot weight: 278 g, injection pressure: 2,336 bar. Machine dimensions X/Y/Z: approx. 4,700 mm / 1,550 mm / 2,200 mm, weight: approx. 7,000 kg, control system: MC4. Including Sepro handling robot. Documentation available. On-site inspection possible. Njdpfjw Hthzsx Ah Uoct

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2006, 160 ton Krauss-Maffei brizgalni stroj, letnik 2006, s transportnim trakom. Premer polža 35 mm, 2 izvlečna jedra, 6 vročih kanalnih con. Stroj bo od nas dostavljen prenovljen in ga je možno pri nas prikazati v obratovanju! Ncodpfx Ahjh Dh Duo Uot

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2006, obratovalne ure: 60.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 8.000 kN, premer vijaka: 85 mm, Horizontal injection moulding machine from Krauss-Maffei. 800 tons clamping force. Year of manufacture: 2006. Screw diameter: 85 mm. MC5 control system. Approximate operating hours: 60,000. The injection moulding machine is delivered RE-conditioned by our team of technical experts and in optimal working condition. We can offer commissioning service at the customer's facility, ensuring full functionality upon completion of installation. Technical Details Ncedpow Avafsfx Ah Uot SCREW DIAMETER: 85 mm INJECTION PRESSURE: 2242 Bar SHOT VOLUME: 2695 cm³ INJECTION WEIGHT: 2452 g (PS) YEAR OF MANUFACTURE: 2006 OPERATING HOURS: 60,000 MIN./MAX. MOULD HEIGHT: 550 / 1100 mm MAX. DISTANCE BETWEEN PLATENS: 2100 mm OPENING STROKE: 1600 mm TIE BAR DISTANCE: 1120 x 1000 mm PLATEN DIMENSIONS: 1600 x 1530 mm CLAMPING FORCE: 8000 kN

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2004, Krauss-Maffei KM 650-3500 C 1 650 t Krauss-Maffei injection moulding machine, year 2004, with only approx. 45,000 operating hours in automatic mode. The machine will be delivered fully refurbished. REFURBISHED MACHINE Equipment: Ncodpfxshy Nnbj Ah Ust - 6 pneumatic cascade valves - 24 hot runner zones - 1 core puller on the fixed platen - 1 core puller on the moving platen - Electric screw drive Technical specifications: - CLAMPING FORCE: 6,500 kN - PLATEN SIZE: 1,540 x 1,440 mm - CLEARANCE BETWEEN BARS: 1,110 x 960 mm - MAX. MOULD OPENING STROKE: 1,150 mm - DAYLIGHT OPENING: 1,750 mm - SCREW DIAMETER: 90 mm - MIN. MOULD INSTALLATION HEIGHT: 600 mm - YEAR OF MANUFACTURE: 2004 - SHOT VOLUME: 1,953 cm³ - SHOT WEIGHT: 1,777 g - INJECTION PRESSURE: 1,742 bar

Stanje: rabljeno, Leto izdelave: 2005, Technical details: Screw diameter: 90 mm Shot weight in polystyrene: 1,758 g/PS (g/polystyrene) Clamping force: 6,500 kN Machine weight approx.: 32 t From series production Nedpfx Ahotuncce Ujct

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Krauss Maffei KM 160–750 CX Injection Moulding Machine Year of manufacture: 2006 Fully hydraulic clamping system. MC5 control system with colour monitor, integrated control panel, and built-in USB ports. Plasticising Unit 1 complete HPS-UN plasticising unit for thermoplastics: Screw diameter: 50 mm Non-return valve, open nozzle Nozzle radius: 10 mm Nozzle orifice: 4 mm Technical Data Clamping Unit Clamping force: 1,600 kN Mould opening force: 86.4 kN Moving platen force: opening: 44.8 kN closing: 37.8 kN Platen dimensions (H × V): 820 × 845 mm Tie bar spacing (H × V): 520 × 520 mm Mould opening stroke: 650 mm Minimum mould height: 300 mm Ncsdjx Thzpjpfx Ah Uet Total daylight (max. platen opening): 950 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 50 mm Injection pressure: 1,892 bar Injection volume: 393 cm³ Shot weight (PS): 357 g Screw speed (standard / optional): 390 / 490 rpm Electrical and Hydraulic Equipment Pump drive power: 22 kW Installed heater power: 10.97 kW Number of heating zones (barrel): 5 Dry cycle time (Euromap): 1,600 1/h Oil tank capacity: 489 l Dimensions and Weight Net weight with control cabinet: 6.0 t Machine dimensions (L × W × H): 4.6 × 1.6 × 2.1 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Brizgalni stroj Krauss Maffei KM 800-5000 MC Leto proizvodnje: 2001 Oprema: robot Tehnični podatki: Zapiralna sila: 8 000 kN Največja sila odpiranja orodja: 356 kN Sila pomika gibljive plošče (odpiranje): 98 kN Sila gibljive plošče (zapiranje): 92 kN Velikost plošč (š × v): 1 610 × 1 530 mm Razmak stebrov (š × v): 1 120 × 1 000 mm Hod odpiranja orodja: 1 400 mm Minimalna višina orodja: 600 mm Maksimalno odprtje: 2 000 mm Hod hidravličnega izmetalca: 250 mm Premer polža: 90 mm Razmerje L/D: 23 Tlak vbrizgavanja: 1 742 bar Prostornina vbrizga: 2 863 cm³ Masa vbrizga (PS): 2 605 g Splošni podatki o stroju Dimenzije (d × š × v): 10 500 × 2 860 × 2 890 mm Nodox Tfyiepfx Ah Uoct Teža: 43 000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Fabricant : Krauss Maffei Type : KM 650-3500-700 CZ Année de fabrication : 2007 Commande : MC 4 Unité de fermeture : Force de fermeture : 650 t Course d’ouverture : 1150 mm Hauteur minimum d’installation du moule : 600 mm Distance maximale entre plateaux : 1750 mm Entraxe colonnes (h x v) : 1100 x 900 mm Dimensions des plateaux (h x v) : 1510 x 1370 mm Centrages (buse – plateau éjecteur) : 200 / 200 mm 1ère unité d’injection : Diamètre de vis : 80 mm Poids de dose max. en PS : 1400 g Volume de dosage : 1543 cm³ Pression d’injection : 2205 bar 2ème unité d’injection : Diamètre de vis : 45 mm Poids de dose en polystyrène : 278 g Volume de dosage : 305 cm³ Pression d’injection : 2336 bar Nedpjx Uqa Dsfx Ah Uoct Accessoires : 2 électrovannes Cascade 16 voies 3 tirages de noyaux sur plateau mobile 3 tirages de noyaux sur plateau fixe 20 zones de régulation pour canaux chauds Interface robot : Euromap 67 Dimensions : Poids total : 34 500 kg Dimensions totales (L x l x h) : 7,8 x 2,5 x 2,5 m Heures de fonctionnement : 45 400 h La machine peut également être utilisée comme machine monocomposant (1K).

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, KM 500/2700C2 Technical Data Clamping Side: Clamping force: 5000 kN Tie bar spacing (h x v): 900 x 800 mm Min. mould height: 480 mm Max. platen distance: 1650 mm Centring diameter: 200 mm Mould weight: 7900 kg Injection Side: Screw diameter: 80 mm Shot volume: 1433 cm³ Injection pressure: 1829 bar Equipment: Nedpox Uqawofx Ah Usct MC 4 control system Core pulls: 2+2 Machine is sold without robot and peripherals!

Stanje: dober (rabljeno), Leto izdelave: 1999, Krauss Maffei Injection Moulding Machine KM 420 - 2700 C1 • Year of manufacture: 1999 Technical Data Clamping Unit • Clamping force: 4200 kN • Max. mould opening force: 250 kN • Moving platen force (opening): 124 kN • Moving platen force (closing): 102 kN • Dimensions of mounting platens (W x H): 1270 mm x 1200 mm • Tie bar spacing (W x H): 800 mm x 800 mm • Mould opening stroke: 1020 mm • Minimum mould height: 380 mm • Maximum daylight: 1400 mm • Ejector force (forward / backward): 95 / 48 kN Injection Unit Ncsdpowqd Aqsfx Ah Ujt • Screw diameter: 80 mm • L/D ratio: 20 • Injection pressure: 1829 bar • Shot volume: 1433 cm³ • Shot weight (PS): 1304 g • Injection rate: 513 cm³/s • Maximum plasticising rate: 108 g/s • Nozzle pressure: 173 kN Electrical and Hydraulic Installation • Pump motor power: 75 kW • Installed heating capacity: 36 kW • Number of cylinder heating zones: 7 • Oil tank capacity: 1075 l Dimensions and Weight • Machine dimensions (L x W x H): approx. 7.06 m x 2.33 m x 2.51 m • Total machine weight: 20,500 kg

Stanje: novo, Leto izdelave: 2025, Injection Moulding Machine – Krauss Maffei KM 160-750 CX Year of manufacture: 2025 Fully hydraulic clamping system. MC 6 control system based on an industrial computer with real-time Ethernet technology, equipped with an integrated 21.5" operator panel featuring a colour touchscreen display. Plasticizing Unit Complete plasticizing unit for thermoplastics, screw diameter 50 mm, with non-return valve and open nozzle Nozzle radius: 10 mm Nozzle opening: 4 mm Technical Specifications (Standard Version) Clamping Unit Clamping force: 1,600 kN Opening force: 86 kN Platen dimensions (H x V): 820 x 845 mm Tie bar spacing (H x V): 520 x 520 mm Opening stroke: 650 mm Minimum mould height: 300 mm Maximum daylight: 950 mm Ejector stroke: 150 mm Ejector force, forward/reverse: 23 / 10 kN Injection Unit Screw diameter: 50 mm L/D ratio: 20.2 Injection pressure: 1,892 bar Injection volume: 393 cm³ Shot weight (PS): 357 g Injection speed: 90 mm/s Injection rate (standard): 177 cm³/s Screw speed (standard): 265 rpm Electro-hydraulic System Pump drive power: 22 kW Installed heating capacity: 15.5 kW Dry cycle time according to Euromap 6: 2.1 s Oil tank capacity: 400 l Linear Robot – Krauss-Maffei LRX 100 Payload < 10 kg (gripper + drives + parts) Part removal on operator-off side Ncsdpfx Aexdd N Ujh Uet Axes: X-axis (from mould): 620 mm, servo motor Y-axis (vertical, with motor brake): 1200 mm, servo motor Z-axis (crosswise): 1500 mm, servo motor Dimensions and Weight Net weight (with control cabinet): 6.10 t Machine dimensions (L x W x H): 4.93 x 1.62 x 2.04 m

Stanje: novo, Leto izdelave: 2025, Injection Moulding Machine – Krauss Maffei KM 300-1400 CX Njdpfx Ajxdd Spsh Usct Year of manufacture: 2025 Fully hydraulic clamping system. MC 6 control system based on an industrial computer with real-time Ethernet technology, equipped with an integrated 21.5" operator panel with full-colour touchscreen. Plasticizing unit Complete plasticizing unit for thermoplastics, screw diameter 60 mm, with non-return valve and open nozzle Nozzle radius: 15 mm Nozzle orifice: 6 mm Technical data (standard version) Clamping unit Clamp force: 3,000 kN Opening force: 169 kN Platen dimensions (H x V): 995 x 1,050 mm Tie bar spacing (H x V): 630 x 630 mm Opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1,150 mm Ejector stroke: 200 mm Ejector force front/rear: 58 / 28 kN Injection unit Screw diameter: 60 mm L/D ratio: 20.8 Injection pressure: 2,006 bar Shot volume: 679 cm³ Shot weight (PS): 618 g Injection speed: 110 mm/s Standard injection rate: 311 cm³/s Standard screw speed: 260 rpm Electro-hydraulic system Pump motor power: 45 kW Installed heater power: 22.4 kW Dry cycle time according to Euromap 6: 2.7 s Oil tank capacity: 720 l Linear robot – Krauss-Maffei LRX 150 Payload < 15 kg (gripper + drives + parts) Part release on operator-opposite side Axes: X axis (from mould): 900 mm, servomotor Y axis (vertical, with motor brake): 750/750 mm, servomotor, telescopic Z axis (transverse): — Dimensions and weight Net weight (with control cabinet): 13.2 t Machine dimensions (L x W x H): 6.16 x 2.17 x 2.26 m

Stanje: novo, Leto izdelave: 2025, Injection Moulding Machine – Krauss Maffei KM 651-6100 GX Year of manufacture: 2025 Hydraulic-mechanical, two-platen clamping system with four pressure pads on the fixed platen and four locking units on the moving platen. PV – injection unit control. MC6 control system based on an industrial PC using real-time Ethernet technology, equipped with an integrated 21.5” operator panel with a color touchscreen display. Plasticizing System Complete plasticizing unit for thermoplastics, screw diameter 95 mm, with non-return valve and open nozzle. Nozzle radius: 25 mm Nozzle opening: 9 mm Technical Specifications (standard version) Clamping Unit Clamping force: 6500 kN Opening force: 455 kN Platen dimensions (H x V): 1660 x 1530 mm Tie-bar spacing (H x V): 1200 x 1020 mm Opening stroke: 1450 mm Mould height (min.–max.): 450 – 1000 mm Daylight: 1900 mm Ejector stroke: 300 mm Ejector force, forward/back: 140 / 70 kN Injection Unit Screw diameter: 95 mm L/D ratio: 23.0 Injection pressure: 1795 bar Shot volume: 3367 cm³ Shot weight (PS): 2391 g Injection speed: 110 mm/s Injection capacity: 780 cm³/s Screw speed (standard): 147 rpm Plasticizing rate (at standard speed): 102 g/s Nozzle contact force: 166 kN Ncodpfx Ahjxdd U Dj Uet Electro-hydraulic System Pump motor power: 97 kW Installed heater power: 54 kW Number of barrel heating zones: 7 Dry cycle time (per Euromap 6): 3.3 s / 840 mm Dry cycle time (KM standard): 2.9 s / 600 mm Oil tank capacity: 1435 l Linear Robot – Krauss-Maffei LRX 250 Payload < 25 kg (gripper + drives + parts) Part placement on operator-opposite side Axes: X axis (from mould): 900 mm, servomotor Y axis (vertical, telescopic, with motor brake): 1000/1000 mm, servomotor Z axis (crosswise): 2500 mm, servomotor Dimensions and Weight Net weight (with control cabinet): 38.5 t Machine dimensions (L x W x H): 10.19 x 3.03 x 2.51 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Krauss Maffei Injection Moulding Machine KM 250-1900 C1 Year of manufacture: 2007 ✅ General Information Manufacturer: Krauss Maffei Model: KM 250-1900 C1 Year of production: 2007 Clamping system: fully hydraulic Control system: MC4 with colour monitor, control panel and floppy disk drive 🔹 Clamping Unit Clamping force: 2500 kN Opening force: 160 kN Platen traverse force: opening 86 kN, closing 68 kN Platen dimensions: 995 x 1050 mm Tie bar spacing: 630 x 630 mm Mould opening stroke: 820 mm Nodsxak Ucspfx Ah Usct Mould height: 330 mm Open daylight: 1150 mm Ejector stroke: 200 mm Ejector force: 58/28 kN 🔹 Injection Unit Screw diameter: 70 mm Injection pressure: 1778 bar Shot volume: 1047 cm³ Shot weight (PS): 953 g Screw speed: 218/306 rpm Injection rate: 400 cm³/s Throughput (PS): 75 g/s (standard), 105 g/s (increased speed) 🔹 Electro-Hydraulic Equipment Pump motor power: 55 kW Cylinder heaters: 30 kW (6 zones) Dry cycles per Euromap: 1400 1/h Oil tank: 720 l 🔹 Dimensions and Weight Net weight (with control cabinet): 14.2 t Dimensions (L x W x H): 6.21 x 2.04 x 2.38 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Brizgalni stroj Krauss Maffei KM 80-380 CX Leto izdelave: 2010 Enota za zapiranje Zapiralna sila: 800 kN Dimenzije vpenjalnih plošč (V × Š): 670 × 670 mm Prostor med stebri (V × Š): 420 × 420 mm Višina orodja (min./maks.): 250 mm Maksimalna odprtina: 750 mm Vbrizgalna enota Premer polža: 40 mm Volumen vbrizga: 201 cm³ Masa vbrizga (PS): 183 g Tlak vbrizga: 1860 bar Elektro-hidravlična oprema Moč črpalnega motorja: 15 kW Moč grelcev: 10,9 kW Dimenzije in teža Dimenzije stroja (d × š × v): 4,09 × 1,48 × 2,02 m Teža (z električno omaro): 3,55 t Ncodjxw Upfjpfx Ah Ust

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Krauss Maffei KM 900 – 8100 GX Injection Moulding Machine Year of manufacture: 2015 General Description: Hydro-mechanical, two-platen clamping system with 4 pressure pads on the fixed platen and 4 control units on the movable platen. The machine is equipped with a PV (proportional valve) injection unit regulation system. Control is provided by a modern MC6 system, based on an industrial PC with real-time Ethernet technology. The control panel features an integrated 19-inch touchscreen with a colour display, LED backlighting, and full process visualisation via ProcessDesigner. Plasticising unit: Complete system for thermoplastics processing Wear-resistant (abrasion-proof) version Screw diameter: 105 mm Nodpfx Aowyxbgsh Uect Shut-off valve and open nozzle Technical specifications: Clamping unit: Clamping force: 9,000 kN Mould opening force (pressure pads): 630 kN Platen dimensions (W x H): 1660 x 1530 mm Tie bar spacing: 1180 x 1000 mm Max. mould opening stroke: 1600 mm Mould height (min – max): 500 – 1100 mm Maximum opening stroke: 2100 mm Ejector stroke: 300 mm Ejector force (forward / return): 140 / 70 kN Injection unit: Screw diameter: 105 mm L/D ratio: 23.0 Injection pressure: 1778 bar Injection volume: 4546 cm³ Shot weight (for PS): 3228 g Injection rate: 805 cm³/s Screw speed (standard): 150 rpm Nozzle touch force: 166 kN Electrical-hydraulic equipment: Pump motor power: 120 kW Heater power: 59 kW Number of barrel heating zones: 7 Dry cycle time / stroke (Euromap 6): 3.3 s / 826 mm Dry cycle time / stroke (KM standard): 2.9 s / 590 mm Oil tank capacity: 1450 l Dimensions and weight: Net weight (incl. control cabinet): 40 tonnes Machine dimensions (L x W x H): 10.72 x 3.03 x 2.51 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, INJECTION MOULDING MACHINE KRAUSS MAFFEI KM 300-1900 C1 Year of manufacture: 2007 Included: Wittmann W 731 Robot General Description We offer a used injection moulding machine from the renowned brand Krauss Maffei, model KM 300-1900 C1, equipped with a Wittmann W 731 robot. The machine features a fully hydraulic clamping system as well as a modern MC4 control system with a colour monitor, integrated operator panel, and floppy disk station. Plasticising Unit Complete plasticising unit for thermoplastics, with wear-resistant version, equipped with a 60 mm screw, check valve, and open nozzle. Technical Data Clamping Unit Clamping force: 3000 kN Mould opening force: 160 kN Moving platen force: – Opening: 86 kN – Closing: 68 kN Platen dimensions (H x W): 995 x 1050 mm Tie bar spacing: 630 x 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Platen opening stroke: 1150 mm Ejector stroke: 200 mm Ejector force: 58 / 28 kN Injection Unit Screw diameter: 60 mm Injection pressure: 2420 bar Injection volume: 769 cm³ Shot weight (PS): 700 g Screw speed (standard/option): 218 / 306 rpm Injection rate: 294 cm³/s Throughput at: Ncjdpfxow Du Hts Ah Uet – standard speed: 55 g/s – increased speed: 78 g/s Electro-hydraulic System Pump motor power: 55 kW Heater capacity: 30 kW Number of barrel heating zones: 6 Dry cycle rate (Euromap): 1,350 cycles/h Oil tank capacity: 720 l Dimensions and Weight Net weight with control cabinet: 14.2 t Overall dimensions (L x W x H): 6.21 x 2.04 x 2.38 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Krauss Maffei KM 250 – 1900 C1 Injection Moulding Machine Year of manufacture: 2007 Control system: MC4 Operating hours: only 8,900! Clamping unit: Clamping force: 2,500 kN Max. mould opening force: 160 kN Moving platen traverse force – opening: 86 kN Moving platen traverse force – closing: 68 kN Mould platen dimensions (H × L): 995 × 1,050 mm Clearance between tie bars (H × W): 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight between platens: 1,150 mm Ejector stroke (hydraulic): 200 mm Ejector force (forward/back): 58 / 28 kN Injection unit: Screw diameter: 70 mm L/D ratio: 20 Injection pressure: 1,778 bar Shot volume: 1,047 cm³ Injection weight (for PS): 953 g Injection rate: 400 cm³/s Screw speed (standard/option): 218 / 306 rpm Max. plasticising rate: 75 g/s Nsdpfx Aow A N Hfjh Uoct Nozzle contact force: 110 kN Electro-hydraulic equipment: Pump motor power: 55 kW Installed heating power: 30 kW Number of heating zones (barrel): 6 Oil tank capacity: 720 l Dimensions and weight: Machine dimensions (L × W × H): approx. 6.21 × 2.04 × 2.39 m Total weight: 14,500 kg Max. mould weight: 3,430 kg Accessories and additional equipment: Oil tank Anti-vibration pads 3 × core pullers 8 × hot runner control zones 2 × air valves Robot interface conforming to Euromap 67 Additional information: Machine located in Poland Ready for collection Possibility to organise loading, transport, installation and commissioning

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Krauss Maffei Injection Moulding Machine KM 110–750 CX Year of manufacture – 2007 Fully hydraulic clamping system. MC5 control with a colour monitor, integrated operator panel, and 3 USB ports. Plasticising Unit Complete plasticising unit for thermoplastics Version with abrasion protection Screw diameter: 40 mm Non-return valve Open nozzle TECHNICAL DATA Clamping Unit Clamping force: 1100 kN Mould opening force: 70 kN Movable platen force: - Opening: 35.4 kN - Closing: 31.4 kN Platen dimensions (h × v): 745 × 770 mm Tie bar spacing (h × v): 470 × 470 mm Mould opening stroke: 600 mm Minimum mould height: 300 mm Platen opening stroke: 900 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 40 mm Injection pressure: 2500 bar Shot volume: 251 cm³ Shot weight (PS): 228.41 g Screw rotation speed (standard/option): 295 / 355 rpm Electrical & Hydraulic Equipment Pump motor rated power: 22 kW Installed heater power: 15.62 kW Number of cylinder heating zones: 5 Dry cycles per Euromap: 2000 cycles/h Oil tank capacity: 489 l Ncodpfox Avhysx Ah Ujt Dimensions and Weight Net weight with control cabinet: 6.2 t Machine dimensions (L × W × H): 4.9 × 1.6 × 2.1 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Krauss Maffei KM 300-1000 CX Injection Moulding Machine Year of manufacture: 2008 Manufacturer: Krauss Maffei Control system: MC 5 with colour monitor, integrated control panel, and disk station Clamping system: Fully hydraulic Plasticising Unit SP 1000 Screw diameter: 50 mm Non-return valve, open nozzle Nozzle radius: 15 mm, opening: 3 mm Clamping Unit Clamping force: 3000 kN Opening force: 169 kN Platen dimensions (H × V): 995 × 1050 mm Tie bar spacing: 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Max. daylight: 1150 mm Ejector stroke: 200 mm Ejector force (forward/back): 58 / 28 kN Injection Unit Screw diameter: 50 mm L/D ratio: 22.0 Injection pressure: 2304 bar Shot volume: 432 cm³ Shot weight (PS): 393 g Injection speed: 170 mm/s Injection flow rate: 334 cm³/s Screw speed (standard): 370 rpm Nsdpfxsw U Rcds Ah Uoct Plasticising capacity (at standard rpm): 54.3 g/s Electro-hydraulic Equipment Pump motor power: 45 kW Heater power: 18.7 kW Number of heating zones: 5 Dry cycle time / stroke according to Euromap 6: 2.8 s / 441 mm Oil tank capacity: 720 l Dimensions and Weight Net weight (with control cabinet): 12.5 t Dimensions (L × W × H): 6.11 × 2.17 × 2.25 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Krauss Maffei Injection Moulding Machine KM 350-2700 C2+ Year of manufacture: 2004 System: Fully hydraulic Control: MC4, color monitor, integrated control panel, built-in floppy disk drive 2. Plasticizing Unit Ncodpsx Elukefx Ah Uot Complete plasticizing unit for thermoplastics Version with abrasion protection Screw diameter: 80 mm Non-return valve Open nozzle TECHNICAL DATA Clamping Unit Clamping force: 3500 kN Mold opening force: 220 kN Movable platen stroke force: - opening: 105 kN - closing: 95 kN Platen size (H × V): 1060 × 1095 mm Tie bar clearance (H × V): 710 × 710 mm Mold opening stroke: 920 mm Mold installation height: 380 mm Daylight opening: 1300 mm Ejector stroke: 250 mm Ejector force: 95 / 48 kN Injection Unit Screw diameter: 80 mm Injection pressure: 1829 bar Shot volume: 1433 cm³ Shot weight for PS: 1304 g Screw speed (standard/option): 218 / 284 rpm Injection rate: 1508 cm³/s Output at standard speed: 108 g/s Output at increased speed: 141 g/s Electro-hydraulic Equipment Pump motor power: 75 kW Installed heater capacity: 36 kW Number of heating zones (barrel): 7 Dry cycle time according to Euromap: 1550 1/h Oil tank capacity: 720 l Dimensions and weight Net weight (with control cabinet): 16.7 t Machine dimensions (L × W × H): 6.91 × 2.04 × 2.41 m