Kk-Industries Tafelschere Schwingschnitt Kk Kletzer Sw 3200 X 13 nakup rabljenega (88.584)

Stanje: novo, Stroke length (max.): max. 400 mm Table height: Floor to upper edge of table top 850 mm Installation height: 600 mm Speeds: Approach 120 mm/s, Pressing 13 - 4 mm/s, Return 170 mm/s Output: 65 L/min (REXROTH axial piston pump) Motor: 15 kW – 1500 RPM Dimensions (LxWxH): 2,100 x 2,400 x 4,300 mm Weight approx.: 11,000 kg Capacity: 1500 kN (150 tons – at 245 BAR) Operating Mode Selection: Via key switch - Manual / setup mode via two-hand operation without light curtain safety on front (always active at rear) - Automatic via two-hand operation at full speed (with active light curtain safety) Main cylinder: Ø 270 mm Auxiliary cylinders: 2 pcs. Ø 70 x 50 mm Motor: 15 kW – 1500 RPM (IE-3) Pump: 45 cc – 65 L/min – REXROTH axial piston pump Speeds: Approach 120 mm/s – Pressing: 13 – 4 mm/s – Return 170 mm/s Clear width: 1300 mm Worktable: 1200 x 800 x 90 mm – with T-slots Ram plate: 1200 x 800 x 600 mm – with T-slots & ribbed reinforcement Installation height: 600 mm (max. distance between table & ram plate) Stroke length: max. 400 mm Table height: 850 mm (floor to upper edge of table top) Hydraulics: (Hydraulic accessories mounted on top of press) Control block & valves (REXROTH proportional valves) Pre-fill valve (NG.125) 8-fold guide system Hydraulic ram safety Mechanical ram safety for upper dead center position Pressure adjustment via PLC Speed adjustment via PLC Pressure hold valve for 600 sec Air cooler Automatic lubrication for guideways Auxiliary motor Auxiliary pump Control System: Main control cabinet (mounted laterally to press frame) Swiveling control panel SIEMENS S7-1200 KTP 9” SIEMENS touchscreen (language selection DE/ENG) Safety PLC (SICK) Light curtain for front & rear of working area (SICK 750 + 150 mm) Soft starter Movable two-hand control SECOMEA Ethernet connection Pgedompfwdjpfx Abiot Linear encoder for stroke adjustment (450 mm – NOVOTECHNIK 16 bit) Work area lighting (2x, IP66) - 8 free I/O ports at PLC for external connections ----- - Safety rail around hydraulic unit - Side access ladder ----- Documentation: Operator manual GERMAN (1x paper, 1x USB), Hydraulic & control diagrams Parts lists CE certificate Standard: EN 16092/1/3 ----- Overall dimensions: approx. 2400 x 2100 x 4100 mm Total weight: approx. 11,000 kg Paintwork: frame RAL 7035 light grey

Stanje: novo, Sheet length: 3280 mm Sheet thickness: 10.0 mm Total power requirement: 11 kW Weight approx.: 8,650 kg Dimensions (LxWxH): 3800 x 2050 x 2150 mm Our premium brand KKI CNC GUILLOTINE SHEAR swing-beam version Model 3210 has everything you need for perfect cutting results. KKI CNC swing-beam guided guillotine shear Thanks to robust and durable mechanics and hydraulics, a precise CNC-controlled backgauge with a ball screw, and user-friendly CNC control, KKI guillotine shears are highly efficient production machines. Shears for sheet thicknesses from 6 mm up to 20 mm and cutting lengths from 3 to 6 meters belong to our standard portfolio. Of course, greater sheet thicknesses and cutting lengths are available on request. Their long service life is ensured by an especially sturdy, fully welded frame construction. The entire machine body, cutting beam, and backgauge are resistant to torsion and deformation, enabling top cutting quality. Pedpfx Absd Nkt Ujiogt By entering the sheet thickness and material type, the CNC control automatically calculates the required cutting angle and blade gap. Our premium brand KKI CNC GUILLOTINE SHEAR swing-beam version Model 3210 has everything needed for perfect cutting. Technological advantages: - Fast and precise cuts - Stable, durable frame construction - Automatic blade gap and angle adjustment - Easy operation - Low maintenance costs - High level of safety - Use of components from renowned manufacturers - Low unit costs Technical specifications: - Sheet thickness: 10 mm - Cutting length: 3,280 mm - Cutting angle: 0.3 - 1.8° - Backgauge with CNC control - Motor power: 11 kW - Length: 3,800 mm - Width: 2,050 / 2,960 mm - Height: 2,150 mm - Weight: 8,650 kg • Swing-beam version • CNC control - Backgauge - Cutting angle - Blade gap - Cutting length • Ball screws for backgauge • Ball transfer table • Side gauge • 2 support arms • 1,000 mm flip-up finger guard Includes simple version of pneumatic sheet support We have many references!

Stanje: novo, Sheet thickness: 6 mm Bending length: 2550 mm Upper roll diameter: 190 mm Pre-bending: 5 mm Sheet length: 2550 mm Pgjdjflvl Aopfx Abijt Model MRM-S 3-Roll Motorized Asymmetric Plate Bending Machine Steel-welded frame – Motorized adjustment of the rear roll Options: Hardened rolls: €1,800 Extended roll shafts: €500 Segment rolls: €750 Digital display: €800 All prices excl. VAT.

Stanje: novo, Laser power: 3 Loading capacity: 1250x Travel X: 2020 mm Travel Y: 4050 mm Travel Z: 350 mm Positioning accuracy: 0.05 mm Repeatability: 0.03 mm Table exchange time: approx. 10 sec Cooling system: Water chiller Weight approx.: 11,500 kg Dimensions (LxWxH): 4400 x 10,000 x 2120 mm The FLC series is a fast, sensitive, reliable, and cost-effective fiber laser cutting machine. It is a high-efficiency laser cutting machine with top-tier standards. It supports a laser power of up to 30,000 W, making it an excellent choice for cutting thick plates. FLC fiber laser cutting machines are commonly used for the fabrication of agricultural machinery, textile machinery, food machinery, construction machinery, elevators, and other large machines and equipment. It is the ideal cutting machine for those looking to outsource their cutting operations. Enables easy blowing, cutting, pausing, calibration simulation, etc., with the wireless remote control. Comes with standard nesting software, enabling fast, operator-independent part preparation for cutting. Features Flycut cutting function. With its double shuttle table, cutting can continue without waiting. Pgodpstuyf Hsfx Abijt All our machines are manufactured to European standards and are CE certified. Our FLC-type machines include nozzle cleaning and a dual camera system. Available cutting areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. Our laser head features autofocus and an active anti-collision function, plus an auto-view function that detects and automatically avoids obstacles. Cutting heads are equipped with automatic cooling. The bridges we use in all our machines consist of a welded construction made from aluminum alloy sheets and are one-piece. This ensures rigidity and prevents deformation under impacts, overlaps, or loads. Additionally, thanks to being three times lighter than steel profile bridges, higher speeds and accelerations can be achieved with less motor power. Accessories included: - Water chiller - Control cabinet cooling - Automatic focus head - Nesting software - 19-inch touch CNC control - Fly cutting - Nozzle and lens starter kit - Scrap drawers - Automatic table changer - Automatic nozzle cleaning - CE compliance - On-site machine training - Wireless remote query - Automatic lubrication system - Dual camera SPECIFICATIONS VALUE Working area: 2000 x 4000 mm Loading capacity: 1200 kg XY axis travel: 2020 x 4050 mm Z axis travel: 350 mm XYZ axis guide: 4-point ball cage XY axis drive system: Rack and pinion Z axis drive system: Ball screw XY axis speed: 100 m/min Z axis speed: 30 m/min XY positioning accuracy: 0.05 mm XY repeatability: 0.03 mm Table exchange time: 10 sec Laser source: Raycus / Hans / JPT Laser power output: 2 / 3 / 4 / 6 / 8 / 12 / 20 kW CNC control system: Fscut Laser cutting head: Raytools / BOCI / WSX Supported gases: Air/Oxygen/N...

Stanje: novo, Tlak: 100 t Pgsdpfor I H Dgex Abiet Hodi/min: 50 Delovna površina mize: 600 x 780 mm Dimenzije drsnika: 240 x 400 mm Nastavitev hoda: 20 - 130 mm Nastavitev drsnika: 100 mm Vgradna višina: 400 mm PK100 EKSCENTRIČNA STISKALNICA Kapaciteta: 100 ton Hodi/min.: 50 spm (nastavljivo) Miza: 780 x 600 mm Drsnik: 240 x 400 mm Nastavitev hoda: 20–130 mm Nastavitev drsnika: 100 mm Vgradna višina: 400 mm Oprema: - Krmiljenje: Siemens S7-1200 - Zaslon: Siemens 9’’ - Nastavitev hoda - Nastavitev min. in max. števila hodov - Samodejno centralno mazanje - Varnostni PLC: PILZ ali SIEMENS - Dvokanalna zaščita, električna omara - Svetlobna zavesa: SICK, PILZ ali LEUZE, Kat. 4. - CE sistem - 2 kom. varnostne plošče za preobremenitev - Spodnja podporna plošča za transport - Zaščita pred posegom od spodaj - Pnevmatska sklopka in zavorna kombinacija

Stanje: novo, Pressure: 150 tons Cylinder: horizontally adjustable Stroke: 350 mm Frame width: 1500 mm Working speed: 3 mm/s Fast forward: 22 mm/s Length: 2500 mm Width: 1200 mm Height: 2500 mm Approximate weight: 2500 kg Cylinder travel, horizontal: 1000 mm - Cylinder horizontally adjustable – 1000 mm - Height-adjustable worktable – easily adjustable via chain mechanism - Safe two-hand operation – convenient control via hand lever and push button - Adjustable maximum pressure – can be customized for a variety of applications Pgjdswwng Tjpfx Abiot - Integrated manometer – allows for precise pressure monitoring during operation - CE-compliant design – manufactured according to current safety and quality standards - Operating manual – comprehensive and easy to understand, available in German and English - Two working speeds – enables especially precise and efficient operation Image for illustration purposes only.

Stanje: novo, Pressure: 1500 Cylinder: fixed Stroke: 350 Column width: 1500 Working speed: 3 Rapid traverse: 22 Length: 2500 Width: 1200 Height: 2500 Approx. weight: 2450 Height-adjustable worktable – easily adjustable via chain Safe two-hand operation – convenient control using hand lever and push button Adjustable maximum pressure – can be individually set for a variety of applications Pgedpfewwnhdsx Abijt Integrated pressure gauge – enables precise pressure monitoring during operation CE-compliant design – manufactured to current safety and quality standards Operating manual – detailed and easy to understand, available in German and English Two working speeds – for particularly precise and efficient operation The picture shown is for illustrative purposes only.

Stanje: novo, Pressure: 100 Cylinder: horizontally adjustable Stroke: 350 Frame width: 1500 Working speed: 2 Rapid traverse: 28 Length: 2400 Width: 1000 Height: 2250 Weight approx.: 1500 Cylinder horizontally adjustable: 1150 – Cylinder horizontally adjustable – 1150 mm Height-adjustable work table – conveniently adjustable via chain Safe two-hand operation – user-friendly control via hand lever and push button Adjustable maximum pressure – individually adaptable for various applications Integrated pressure gauge – allows precise pressure monitoring during operation CE-compliant design – manufactured according to current safety and quality standards Operating manual – detailed and easy to understand, available in German and English Two working speeds – for particularly precise and efficient work Pgodpfowwngysx Abijt The image is a sample photo

Stanje: novo, Tlak: 60 Prehod med stojali: 900 x 300 Moč motorja: 3 Hitrost: 8 Hitrost: 13 Dimenzije (D x Š x V): 1500 x 850 x 2450 Teža cca: 700 Pedpfxov Akw Hj Abiegt Hod: 300 Standardna oprema: Visokokakovostna hidravlična stiskalnica, ki omogoča ročno in motorizirano upravljanje. Cilindri so nastavljivi bočno. CE-certificirano Regulacija tlaka 1 leto garancije Manometer Uporabniški priročnik (ročni) Razmik med stojali: 900 x 300 mm

Stanje: novo, Pressure: 70 Cylinder: horizontally adjustable Stroke: 350 mm Frame width: 900 mm Working speed: 3 Length: 1700 mm Width: 700 mm Height: 2100 mm Weight approx.: 650 kg Rapid advance: 29 Horizontally adjustable cylinder: 550 mm Pjdpfx Aswwnhwsbijgt – Horizontally adjustable cylinder – 550 mm Height-adjustable work table – conveniently adjustable via chain drive Safe two-hand operation – user-friendly control via hand lever and push-button Adjustable maximum pressure – can be individually set for various applications Integrated manometer – enables precise pressure monitoring during operation CE-compliant design – manufactured according to current safety and quality standards Operating instructions – detailed and easy to understand, available in German and English Two working speeds – for particularly precise and efficient operation The image is for illustrative purposes only.

Stanje: novo, Pressure: 100 Cylinder: horizontally adjustable Stroke: 350 mm Stand width: 1050 mm Working speed: 2 mm/s Rapid traverse: 28 mm/s Length: 1900 mm Width: 850 mm Height: 2250 mm Weight approx.: 1030 kg Cylinder horizontally adjustable: 650 mm - Cylinder adjustable horizontally - 650 mm Height-adjustable work table – conveniently adjustable via chain Pjdpewwngtefx Abiogt Safe two-hand operation – convenient control via hand lever and push button Adjustable maximum pressure – individually adaptable for various applications Integrated manometer – enables precise pressure monitoring during operation CE-compliant design – manufactured according to current safety and quality standards Operating manual – detailed and easy to understand, available in German and English Two working speeds – for particularly precise and efficient work Image is a sample photo

Stanje: novo, Pressure: 100 Cylinder: fixed Stroke: 350 mm Frame opening: 1050 mm Working speed: 2 mm/s Rapid approach: 28 mm/s Length: 1900 mm Pgedpfxowwng Hs Abijt Width: 850 mm Height: 2250 mm Weight approx.: 1030 kg Height-adjustable work table – easily adjustable via chain Safe two-hand operation – convenient control via hand lever and push button Adjustable maximum pressure – can be customized for a wide range of applications Integrated pressure gauge – allows precise pressure monitoring during operation CE-compliant design – manufactured according to the latest safety and quality standards Operating manual – detailed and easy to understand, available in German and English Two working speeds – for particularly precise and efficient working The photo is a sample image.

Stanje: novo, Laser power: 4Loading capacity: 1250x travel: 2020y travel: 4050z travel: 350Positioning accuracy: 0.05Repeatability: 0.03Table change time: approx. 10Cooling system: Water chillerWeight approx.: 11500Dimensions (LxWxH): 4400 x 10000 x 2120 The FLC series is a fast, sensitive, reliable and cost-effective fiber laser cutting machine. It is a high-efficiency laser cutting machine that meets the standards of the upper price class. It can support laser power up to 30,000 W, making it an excellent choice for cutting thick plates. FLC fiber laser cutting machines are commonly used for manufacturing agricultural machinery, textile machinery, food processing equipment, construction machinery, elevators, and other large machines and systems. It is an ideal cutting machine for those looking to outsource cutting operations. The wireless remote control allows easy blowing, cutting, pausing, calibration simulation, and more. A standard nesting software program very quickly prepares parts for cutting without any operator intervention. It also features a fly-cutting function. The double automatic changing table allows you to continue cutting without downtime. All our machines are manufactured according to European standards and come with a CE certificate. Our FLC machines are equipped with nozzle cleaning and a dual camera system. Choose from cutting area sizes of 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. The laser head is equipped with autofocus and an active anti-collision feature, as well as an auto-view function that detects obstacles and automatically moves. Cutting heads are equipped with automatic cooling. Pjdpsruwbijfx Abisgt The bridge used in all our machines consists of a welded aluminum alloy sheet construction in a single piece. This unibody design ensures the rigidity of the bridge and prevents deformation due to impacts, overlaps, or loads. Furthermore, the lightweight structure—three times lighter than steel profile bridges—enables high speeds and acceleration with lower motor power. Accessories included: - Water chiller - Control cabinet cooling - Automatic focus head - Nesting software - 19" touchscreen CNC control - Fly cutting - Nozzles and lenses starter kit - Scrap collection drawers - Automatic table changer - Automatic nozzle cleaning - CE compliance - On-site machine training - Wireless remote monitoring - Automatic lubrication system - Dual camera SPECIFICATIONS VALUEWorking area 2000 x 4000 mmLoading capacity 1200 kgXY axis travel 2020 x 4050 mmZ axis stroke 350 mmXYZ axis guide 4-point ball cageXY axis drive system Rack and pinionZ axis drive system Ball screwXY axis speed 100 m/minZ axis speed 30 m/minXY positioning accuracy 0.05 mmXY repeatability 0.03 mmTable change time 10 secLaser source Raycus / Hans / JPTLaser source output power 2 / 3 / 4 / 6 / 8 / 12 / 20 kWCNC control system FscutLaser cutting head Raytools / BOCI / WSXSupported gases Air/O2/N2

Stanje: novo, Pressure: 40 Cylinder: fixed (not movable) Stroke: 350 mm Podpfx Aewwnhqebisgt Clearance between uprights: 900 mm Working speed: 4 mm/s Length: 1600 mm Width: 700 mm Height: 2050 mm Approx. weight: 430 kg Height-adjustable work table – conveniently adjustable via chain Safe two-hand operation – comfortable control via hand lever and push button Adjustable maximum pressure – can be individually set for various applications Integrated pressure gauge – enables precise pressure monitoring during operation CE-compliant design – manufactured in accordance with current safety and quality standards Operating manual – detailed and easy to understand, available in German and English Two working speeds – for particularly precise and efficient work The image is for illustration purposes only.

Stanje: novo, Stroke length (max.): 400 mm Pump capacity: 45 cc – 65 L/min Motor: 22 kW (IE-3) Table height: 750 mm (without cover plate) – 820 mm (with cover plate) Table area: 3500 mm x 2000 mm Clear width: 2200 mm Bridge travel: 2800 mm Return speed: 50 mm/sec Dimensions (LxWxH): 3500 x 3200 x 3600 mm Cylinder: Ø 370 mm – Capacity: 3000 kN (280 bar – 300 ton) Key Specifications: - Cylinder diameter: Ø 370 mm - Table dimensions: 3500 x 2000 mm (clear width: 2200 mm) - Load-bearing surface: 3000 x 2000 mm - Bridge travel: 2800 mm - Lateral cylinder travel: 900 + 900 mm from center (total 1800 mm) - Maximum installation height: 1200 mm (distance from table or cover plate to cylinder piston WITHOUT mandrels) - Stroke length: 400 mm - Motor: 22 kW (IE-3) - Pump: 45 cc – 65 L/min (KAWASAKI) - Forward speed: 10 - 5 mm/sec - Return speed: 50 mm/sec - Table height: 750 mm (without cover plate) – 820 mm (with cover plate) Equipment: - Hydraulics: DUPLOMATIC - Control: Siemens S7-1200 - BEIJER 7'' display - Control cabinet mounted to side wall of bridge - Swivel operator panel - Pressure adjustable via display (50 – 300 ton) - Speed adjustable via throttle valve - Cylinder with chrome plating - Wired remote control - Stroke length adjustable via distance sensors Podpfx Abjr Etulsijgt - 400 V, 50 Hz, 3 phase power supply - Anti-rotation lock for cylinder - Lateral movement of cylinder via drive motor - Bridge movement via drive motor - Bridge area safeguarded by light curtain (Datalogic) - Cylinder mandrels: Ø 200 / 400 / 600 mm, in length - 3 extension mandrels included (Example photo)

Stanje: novo, Sheet thickness: 13 mm Pgodpfx Abjd Ab R Hoist Bending length: 3100 mm Top roll diameter: 300 mm Technical Data: - Hardened and polished rolls - Entire frame made of ST-52 steel - 4 rolls are arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic approach - Top and bottom rolls are driven by hydraulic system and gearbox - Vertical movements of the bottom roll are hydraulically driven - Mobile control panel - In compliance with CE standards Options: - Variable rotation speed: EUR 4,681 - Material feed table: EUR 3,400 - Oil cooler: EUR 1,040 - Central support: EUR 13,600 - Side supports: EUR 9,400 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have numerous references!

Stanje: novo, Laser power: 2Loading capacity: 1250x-Travel (X): 2020mmTravel (Y): 4050mmTravel (Z): 350mmPositioning accuracy: 0.05 mmRepeatability: 0.03 mmTable changeover time: approx. 10 secCooling system: water chillerApprox. weight: 11,500 kgDimensions (LxWxH): 4400 x 10,000 x 2120 mm The FLC series is a fast, responsive, reliable, and cost-effective fiber laser cutting machine. It is a high-efficiency laser cutting system that meets premium-level standards. Capable of supporting laser power up to 30,000 W, it is an excellent choice for cutting thick sheet metal. FLC fiber laser cutting machines are commonly used in the production of agricultural machinery, textile machinery, food processing equipment, construction machinery, elevators, and other large machines and plants. It is an ideal cutting system for those looking to outsource their work. Enables easy blowing, cutting, pausing, calibration simulation, etc., via wireless remote control. Comes standard with nesting software, that quickly and automatically prepares parts for cutting without operator intervention. Also features a flycut cutting function. With a dual exchange table, you can continue cutting without any waiting time. All our machines are manufactured to European standards and feature CE certification. Our FLC machines include automatic nozzle cleaning and a dual camera system. Available cutting areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. Our laser head offers autofocus, active anti-collision functionality, and auto-view for obstacle detection and automatic movement. Cutting heads are equipped with automatic cooling. All machine bridges are fabricated as one-piece welded aluminium alloy sheet structures. This single-piece design ensures bridge rigidity and prevents deformation during collisions, overlaps, or high loads. In addition, their structure is three times lighter than steel bridges, allowing higher speeds and acceleration with lower motor power. Included accessories: - Water chiller - Electrical cabinet cooling - Automatic focus head - Nesting software - 19-inch touch CNC control - Fly cutting - Nozzles and lenses incl. starter kit - Workpiece debris drawers - Automatic table changer - Automatic nozzle cleaning - CE compliant - On-site machine training - Wireless remote monitoring - Automatic lubrication system - Dual camera system SPECIFICATIONS VALUE Pgjdpfx Aoruwbxjbiot Working area: 2000 x 4000 mm Loading capacity: 1200 kg XY Travel: 2020 x 4050 mm Z-Axis Travel: 350 mm XYZ Axis Guidance: 4-point ball cage XY Axis Drive System: Rack and pinion Z Axis Drive System: Ball screw XY Axis Speed: 100 m/min Z Axis Speed: 30 m/min XY Position Accuracy: 0.05 mm XY Repeatability: 0.03 mm Table Changeover Time: 10 sec Laser Source: Raycus / Hans / JPT Laser Output Power: 2 / 3 / 4 / 6 / 8 / 12 / 20 kW CNC Control System: Fscut Laser Cutting Head: Raytools / BOCI / WSX Support gases: Air / Oxygen / Nitrogen

Stanje: novo, Punching force: 65 t Weight approx.: 1,600 kg Height: 1,880 mm Motor: 5.5 kW Width: 1,700 mm Blade length: 10 mm Throat depth: 305 mm Stroke: 55 mm - With one cylinder - 5 workstations: punching, notching station, as well as flat bar, round bar, and angle steel shearing stations. Supplied in the following configuration: - Technical documentation - Hydraulic and electrical components from renowned manufacturers - Foot pedal - Selector switch for setup and operation modes - Support table with stops at the notching and flat bar stations - Support table with stops at the punching station - CE-compliant design Podpfx Asttc Utjbisgt SPECIFICATION / VALUE Punching force: 65 t Throat depth: 305 mm Stroke: 55 mm Strokes per min. (at 20 mm stroke): 25 Plate thickness (max.): Ø 26 x 20 mm Working height: 900 mm Shearing capacity: - 375 x 15 mm - 300 x 20 mm Angle steel 45° (one leg): 70 x 70 x 10 mm Angle steel 90°: 120 x 120 x 12 mm Blade length: 380 mm Round: 45 mm Square: 45 mm Material thickness: 10 mm Width: 1,700 mm Depth: 950 mm Motor power: 5.5 kW Supply voltage: 400 V / 50 Hz Height: 1,880 mm Weight: 1,600 kg

Stanje: rabljeno, Further technical data available on request Ride-on Scrubber Dryer KKI ASSM 650 with automatic drive and disc brushes Demo special price EUR 6,899 Product Information KKI 650 Ride-on Scrubber Dryer - Ride-on scrubber dryer Very compact ride-on scrubber dryer with a 65 cm working width and an extremely small turning radius for cleaning in confined spaces - Extremely maneuverable – on-the-spot turning - Multiple small disc brushes with increased contact pressure Description: - Battery-powered ride-on scrubber dryer with automatic drive and disc brushes - The very compact size provides this model with the necessary agility to operate effectively in tight spaces, allowing for easy navigation around obstacles - Control panel with operating elements - Manual operation of brush, squeegee, and water flow via levers - Tiltable dirty water tank for easier cleaning - Multiple small disc brushes with directly mounted squeegee enable a short design and a very small turning radius - Disc brushes with individual motors increase contact pressure - Automatic release of the squeegee upon accidental collisions to prevent damage Features: - Drive motor - Central, curved squeegee - 2-tank system - Hour meter - Fresh water tank with quick-fill hose - Automatic speed regulation - Automatic water and brush stop - Battery charge indicator Scope of delivery: - 4 disc brushes Pgodpfx Abol Iir Ioijt - Battery - Charger - Cleaning area: 3,000 sqm - Working capacity: 3,250 sqm/h - Brush working width: 650 mm - Suction width: 750 mm - Speed: 5 km/h - Brush diameter: 4 x 180 mm - Brush pressure: 22 kg - Brush speed: 190 rpm - Fresh water tank: 65 l - Dirty water tank: 65 l - Power supply: 24 V battery - Total power: 1,650 W - Rated voltage: 24 V - Length: 1,150 mm - Width/Depth: 780 mm - Height: 1,425 mm - Weight (net): 220 kg

Stanje: novo, Laser power: 4 Working area: 1500 x 3000 mm Load capacity: 1200 kg X-axis travel: 1520 mm y-axis travel: 3030 mm Positioning accuracy: 0.05 mm Repeatability: 0.03 mm Dimensions (L x W x H): 10,000 x 400 x 2,120 mm The FLC series is a fast, responsive, reliable, and cost-effective fiber laser cutting machine. It is a high-efficiency laser cutting machine with upper-class standards. With support for laser power up to 30,000 W, it is an excellent choice for cutting thick plates. FLC fiber laser cutting machines are typically used for processing agricultural machinery, textile machinery, food machinery, construction machinery, elevators, and other large machines and equipment. This is an ideal cutting machine for everyone looking to outsource cutting operations. The wireless remote control allows simple blowing, cutting, pausing, calibration simulation, and more. The standard nesting software enables parts to be nested for cutting quickly and without operator intervention. Flycut cutting functionality is also included. As a double shuttle table system, operation can continue without downtime between sheets. All our machines are manufactured to European standards and come with CE certification. Our FLC model machines feature nozzle cleaning and a dual camera system. Available cutting areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. Our laser head features autofocus, active anti-collision, and an auto-view function that detects obstacles and moves automatically. Cutting heads are equipped with automatic cooling. The bridges used in all our machines are made from a single-piece welded aluminum alloy plate construction. The one-piece design ensures bridge stiffness and prevents deformation when subject to impacts, overlaps, or loads. In addition, due to their structure being three times lighter than steel profile bridges, high speeds and acceleration are achieved with lower motor power. Included accessories: - Water chiller - Control cabinet cooling - Automatic autofocus head - Nesting software - 19" CNC touch control - Fly cutting functionality - Starter kit with nozzles and lenses - Parts debris drawers - Automatic table changer - Automatic nozzle cleaning - CE conformity - On-site machine training - Wireless remote diagnostics - Automatic lubrication system - Dual camera system SPECIFICATIONS VALUE Working area 1500 x 3000 mm Load capacity 1200 kg XY-axis travel 1520 x 3030 mm Z-axis travel 300 mm XYZ-axis guide 4-point ball cage XY-axis drive system Rack and pinion Z-axis drive system Ball screw XY-axis speed 100 m/min Z-axis speed 30 m/min XY positioning accuracy 0.05 mm XY repeatability 0.03 mm Table change time 10 sec Laser source Raycus / Hans / JPT Laser source output 2 / 3 / 4 / 6 / 8 / 12 / 20 kW CNC control system Fscut Laser cutting head Raytools / BOCI / WSX Pgederuwazspfx Abist Supported gases Air/Oxygen/Nitrogen Cooling type Water cooled Machine weight 12,000 kg Machine di...

Stanje: novo, Sheet thickness: 13 mm Bending length: 2100 mm Top roll diameter: 230 mm Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 steel - The 4 rolls are arranged symmetrically - Hydraulically driven cover for easy removal of material - Digital display for lower and side roll positions - Hydraulic approach - Top and bottom rolls driven by hydraulics and gearbox - Vertical movement of the lower roll is hydraulically driven - Mobile control panel - In accordance with CE standards Options: - Variable rotation speed EUR 4,681 - Material feed table EUR 3,400 - Oil cooler EUR 1,040 Pjdpod Ab Scjfx Abiegt - Central support EUR 8,250 - Side supports EUR 5,560 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have many references!

Stanje: novo, Sheet thickness: 13 Pgjdpfx Ajd Ab R Tobist Bending length: 2550 mm Top roll diameter: 270 mm Sheet length: 2550 mm Technical Specifications: - Hardened and polished rolls - Complete body made of ST-52 steel - The 4 rolls are arranged symmetrically - Hydraulically driven top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic adjustment - Top and bottom rolls driven by hydraulic system and gear drive - Vertical movement of the lower roll is hydraulically powered - Movable control panel - CE compliant Options: - Variable rotation speed EUR 4,681 - Material feed table EUR 3,400 - Oil cooler EUR 1,040 - Central support EUR 8,250 - Side supports EUR 6,690 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have many references!

Stanje: novo, Laser power: 12 kW | Loading capacity: 1250 kg | X-axis travel: 2020 mm | Y-axis travel: 4050 mm | Z-axis travel: 350 mm | Positioning accuracy: 0.05 mm | Repeatability: 0.03 mm | Table changeover time: approx. 10 s | Cooling system: Water chiller | Weight: approx. 11,500 kg | Dimensions (LxWxH): 4400 x 10,000 x 2120 mm The FLC series is a fast, sensitive, reliable, and cost-efficient fiber laser cutting machine. This high-efficiency machine competes with top-tier models and supports a maximum laser power of up to 30,000 W, making it an excellent choice for cutting thick plates. FLC fiber laser cutters are commonly used in the production of agricultural machinery, textile machines, food processing equipment, construction machinery, elevators, and other large machines and systems. Ideal for businesses seeking to outsource cutting operations. Functions such as blowing, cutting, pausing, calibration simulation, and more are possible via the wireless remote control. Standard nesting software quickly prepares parts for cutting without operator input and includes a flycut function. Thanks to its dual exchange table design, cutting operations can continue seamlessly without waiting time. All our machines are manufactured according to European standards and carry a CE certificate. FLC models are equipped with nozzle cleaning and a dual camera system. Available cutting areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. The laser head features autofocus and an active anti-collision function, along with an auto-view function that detects obstacles and automatically adjusts its path. Cutting heads feature automatic cooling. The bridges in our machines are made of one-piece, welded aluminum alloy construction. This design ensures rigidity and prevents deformation from shocks, overlaps, or loads. Moreover, these bridges are three times lighter than steel profiles, enabling higher speed and acceleration with reduced motor power. Accessories included: - Water chiller - Control cabinet cooling - Automatic focus head - Nesting software - 19-inch touch CNC control - Flycut function - Nozzle and lens starter kit - Parts debris drawers - Automatic table exchanger - Automatic nozzle cleaning - CE compliance - On-site machine training - Wireless remote monitoring - Automatic lubrication system - Dual camera system Psdpfx Asruwbqebiegt SPECIFICATIONS | VALUE Working area: 2000 x 4000 mm Loading capacity: 1200 kg XY axis travel: 2020 x 4050 mm Z-axis travel: 350 mm XYZ axis guide: 4-point ball cage XY drive system: Rack and pinion Z-axis drive system: Ball screw XY-axis speed: 100 m/min Z-axis speed: 30 m/min XY positioning accuracy: 0.05 mm XY repeatability: 0.03 mm Table change time: 10 s Laser source: Raycus / Hans / JPT Laser output power: 2 / 3 / 4 / 6 / 8 / 12 / 20 kW CNC control system: Fscut

Stanje: novo, Sheet thickness: 13 mm Bending length: 4100 mm Top roll diameter: 360 mm Pgjdjd Ab Ruopfx Abiot Technical Data: - Hardened and polished rolls - Complete frame made of ST-52 steel - The 4 rolls are arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic positioning - Top and bottom rolls driven by hydraulics and gearbox - Vertical movements of the bottom roll are hydraulically powered - Mobile control panel - In compliance with CE regulations Options: - Variable rotation speed EURO 4,681 - Material feed table EURO 3,400 - Oil cooler EURO 1,040 - Center support EURO 13,600 - Side supports EURO 12,516 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have many references!

Stanje: novo, Bending length: 3100 mm Sheet thickness: 13 mm Top roll diameter: 300 mm Technical specifications: - Hardened and polished rolls - Full body made of ST-52 steel - Conical bending device Pedpfed Ab S Tex Abisgt - Digital display for side rolls - Portable control panel - Rolls are mounted with bearings - Upper roll cover, hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Side movements are hydraulically powered Options: - Variable rotation speed: EUR 4,682 - Sheet feeding table: on request - Oil cooler: EUR 1,040 - Center support: EUR 13,600 - Side supports: EUR 9,400 We have numerous references available!