Kaltenbach Stroj Za Vrtanje In Žaganje Profilov nakup rabljenega (134.150)

Stanje: novo, Leto izdelave: 2024, Ring Bending Machine ZOPF Isdpfx Aajhmbh Ho Usar Model ZB 70/3 Heco - Three powered rollers with smooth surfaces - Hydraulic adjustment of the top roller - Operation possible in both horizontal and vertical positions - Digital display with memory function - Shafts supported in tapered roller bearings - Use of interchangeable slide rails on the guide carriage - Roller diameter: 152/162 mm - Shaft diameter: 40 mm - Shaft speed: 8.5 rpm - Drive motor: 1.1 kW - Hydraulic cylinder force: 80 kN - Bending capacity: up to 60x10 mm on edge - Round tube: up to 70x2 mm - Angle iron: 50x50x6 mm - Solid material: 35 mm - Weight: 490 kg - Color: RAL5012 / RAL7015

Stanje: novo, Leto izdelave: 2024, Section bending machine Zopf - Model: ZB 60/3 MD - Year of manufacture: 2024 - Motor-driven - Three-roll drive - With digital display - Shaft diameter: 30 mm - Equipped with standard rolls Iasdpfx Aaogh T Hko Uer - Bending capacity up to round tube 48 x 3.2 mm - Solid material up to 30 mm - Weight approx. 190 kg - Motor: 0.75 kW, 400 V, 50 Hz, 3-phase - With mobile base, for horizontal and vertical operation - New

Stanje: novo, Leto izdelave: 2024, Profile bending machine Zopf - Model ZB 60 M with base frame - Year of manufacture: 2023 - Motorized drive - Two-roll drive - Shaft diameter: 30 mm - Equipped with standard rollers - Bending capacity: up to round tube 48 x 3.2 mm - Solid material up to 30 mm - Weight approx. 150 kg - Motor 0.75 kW, 400 V, 50 Hz, 3-phase Iaedpfx Aasgh T H Dj Usr - New

Stanje: novo, Leto izdelave: 2024, Ring Bending Machine, Manufacturer: Zopf – Model ZB 80/3 H eco NC - Three driven rollers with smooth surfaces - Hydraulic adjustment of the top roller - Working positions: horizontal and vertical Isdpeg Ntmhofx Aa Uear - NC control for length and radius - Shafts supported by tapered roller bearings - Exchangeable slide rails on the guide carriage - Roller diameters: 152/162 mm - Shaft diameter: 40 mm - Shaft speed: 8.5 rpm - Drive motor: 1.5 kW - Hydraulic cylinder pressing force: 80 kN - Bending capacity: up to 60x12 mm (vertical orientation) - Round pipes: up to 80x2 mm - Angle iron: 60x60x6 mm - Solid material: 35 mm - Weight: 550 kg - Year of manufacture: 2019

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, številka stroja/vozila: BB 60, Pipe bending machine BB 60 without mandrel with a bending tool 60 mm, approx. radius 175 mm, with counter rollers - Model BB 60 - Bending capacity up to round tube 60 x 3.6 mm (St 37) - Digital display Iodpfx Aaed Eywye Uear - Programmable bending angle - with foot pedal - Working speed 1–3 rpm - Infinitely variable via inverter - Motor 3 kW, 400 Volt, 50 Hz, 3-phase - Hardened shaft - Worktable made of CK 45 - Weight 400 kg - 400 Volt, 50 Hz, 3-phase.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 15105602, potovalna razdalja osi X: 700 mm, pomik osi Y: 315 mm, pomik po osi Z: 180 mm, največja hitrost vretena: 9.200 obr/min, število mest v zalogovniku orodij: 32, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Bidding obligates timely collection between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Travel X-axis: 700 mm Travel Y-axis: 315 mm Travel Z-axis: 180 mm Travel W-axis: 495 mm Feed rate X-axis: 9 m/min Feed rate Y-axis: 9 m/min Feed rate Z-axis: 4 m/min Spindle speed (max.): 9,200 rpm Spindle speed (min.): 50 rpm Spindle mounting diameter: 30 mm Tool magazine slots: 32 Max. tool length: 260 mm Max. tool diameter without adjacent empty slots: 63 mm Ijdpfoxm S R Eex Aa Uoar Table width: 410 mm Table length: 1,230 mm Table load capacity: 250 kg Control manufacturer: HEIDENHAIN MACHINE DETAILS Dimensions (L x W x H): 3,500 x 2,400 x 2,200 mm Distance from floor to coordinate table: 1,010 mm Distance from coordinate table to spindle nose: 125 to 620 mm Horizontal reach: 370 mm EQUIPMENT Documentation/Manual Infinitely variable spindle speed FEHLMANN indexing device (4th axis) 126 SK 30 tool holders Supplementary documentation

Stanje: rabljeno, Leto izdelave: 1985, Drilling capacity in steel (diameter): 30 mm X-travel: 850 mm Y-travel: 435 mm Control: HEIDENHAIN TNC 150 Total power requirement: 16 kW Iaodpfjt Hxa Hex Aa Ujr Machine weight approx.: 3,500 kg Space requirement approx.: m F E H L M A N N (Switzerland) CNC-controlled precision drilling and milling machine Model: PICOMAX 100 CNC – 2+ Am Year of manufacture: 1985 16 085109 X-axis (longitudinal): 850 mm Y-axis (lateral): 435 mm Z-axis (vertical): 210 mm Table size: 500 x 1,570 / 390 x 1,280 mm Min./Max. distance vertical spindle - table top: 140 / 690 mm Vertical adjustment of the drill head (motorized): 540 mm Spindle overhang: approx. 450 mm Spindle mount: SF 32 Drilling capacity in steel: 30 mm Vertical spindle stroke (quill): max. 210 mm Spindle speeds (infinitely variable, 2 ranges): 25 – 5,600 rpm Workpiece weight: 600 kg Feed rates XYZ: 1 - 8,000 mm/min Drilling feeds, 6 automatic: 0.03/0.07 to 0.4 mm/min Rapid traverse XYZ: 4/8 m/min Spindle drive: 6 kW Total drive approx.: 16 kW - 380 V - 50 Hz Weight approx.: 3,500 kg Accessories / special equipment: • HEIDENHAIN CNC 2-axis contouring control, type TNC 150, with color monitor, graphics, all standard subroutines and cycles, tapping cycles, manual control unit or electronic handwheel, RS 232 interface, etc. The drill spindle axis (Z) can be operated manually or via CNC control. • Drilling depth can be preset via a 12-position turret stop, with digital display on the monitor. • Drill head can also be programmed via a height positioning device in 3 preset positions. • Precision coordinate table for X/Y CNC axes with hardened ball screws • Equipped with quick-change tool system, various tool holders, drill chucks, coolant system, etc. Condition: good to very good – demonstrated under power Delivery: ex-stock, as inspected Payment: strictly net, upon receipt of invoice

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, RÖDER Profile Drilling System PBA 3000 NC with 2-axis positioning control Heidenhain Positip 8016 active for x and y axes and drilling unit Optimum MH35V Year of manufacture: 2024 for rational and efficient production of holes in beams, profiles, tubes, and other long parts Technical Data: Max. travel x-axis: 3000 mm Max. travel y-axis: 250 mm Max. travel z-axis: 350 mm Max. support length: 5700 mm (via extendable support rollers) Max. support load: 500 kg Equipment (Standard): 3 pcs. mechanical vices Röhm BOF 4 Max. clamping width: 220 mm Clamping width: 160 mm Jaw height: 50 mm Drilling Unit Optimum MH35V Technical Data: Motor: 1.5 kW, 400 V Drilling capacity in S235JR: Ø 32 mm Continuous drilling capacity in S235JR: Ø 28 mm Tapping mode: Yes Spindle taper: BT 30 Iedex E Sytopfx Aa Uoar Spindle stroke: 90 mm Speed gearbox: Two-stage industrial motor plus 6 transmission stages Speed range: 220 – 3100 rpm Gear head: swivels +/- 30° Minimum quantity lubrication equipped with micro dosing pump, pneumatic frequency generator, 6 mm push-in connection for air supply/device control; 75 l PE liquid tank, nozzle feed D8 mm, 2000 mm length, plastic articulated nozzle G1/8" with mounting sleeve D12 x 30 mm, nozzle tip made of aluminum Optionally available at extra cost: Pneumatic tapping device M3 – M12; Integrated on PBA 3000/6000, pneumatic, with flexible arm, Speed: 400 rpm Working range: Radius 100–950 mm, 6 pcs. quick-change inserts M4, 5, 6, 8, 10, 12; Including linear guide, adapter, pneumatic connection, and maintenance unit Subject to prior sale. No liability for typographical errors or mistakes.

Stanje: novo, Drilling capacity in steel (diameter): 13.0 mm X-travel: 300 mm Y-travel: 130 mm Speed: 100 - 2500 rpm Throat depth: 165 mm Spindle taper: MT 3 Table size: 490 x 120 mm Milling cutter diameter: 30.0 mm Motor: 230 Volt Total power requirement: 0.75 kW Machine weight approx. 50 kg Space requirement approx. 520 x 500 x 740 mm Description: - Brushless DC motor - Ensures optimal torque in the lower speed range - Dovetail guideways on X, Y, and Z axes - Backlash-free adjustable via gib strip - Milling head swivels both sides for angle drilling, bevel milling, etc. - Quill adjustment via handle, fine adjustment via handwheel - Precisely ground cross table with T-slots - Maintenance-free 500 W drive motor runs smoothly - Infinitely variable speed control for adaptation to the workpiece - Individually lockable guides ensure a clean milling finish Scope of delivery: - Geared drill chuck 1 - 13 mm / B16 - Drill chuck arbor MT 3 / B16 Iaodpfoxabb Hjx Aa Ujr - Drawbar M12 - Height-adjustable safety guard - Operating wrench

Stanje: dober (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 55453, ACIERA 23 CNC DRILLING MACHINE With Aciera ISO30 quick-change system Machine inspected and 100% operational Excellent price-performance ratio WITH CNC HEIDENHAIN TNC 125 Technical Specifications Drilling capacity in steel: 23 mm Thread cutting in steel: M18 Spindle speeds: stepless from 45 rpm to 4000 rpm Spindle stroke: 120 mm Table length: 590 mm Table width: 320 mm Distance between table and spindle min.: 110 mm Distance between table and spindle max.: 570 mm Longitudinal travel: 500 mm Iaedsu Tn Rajpfx Aa Uer Cross travel: 300 mm Feeds: 0.02-0.6 mm/min Electrical connection: 50 Hz, 3x 380 volts Power: 4.0 kW Machine weight approx.: 2110 kg Machine dimensions: length 1700 mm, width 1400 mm, height 2100 mm Technical specifications are not binding.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1980, Funkcionalnost: popolnoma funkcionalen, Naprodaj je vrtalno-rezkalni stroj proizvajalca Alzmetall Tip Plus 3 DG Stroj je bil v celoti razstavljen in obnovljen. Ogled in preizkus sta možna kadarkoli. Isdjxn T S Hjpfx Aa Uear Za nakladanje je na voljo viličar.

Stanje: dober (rabljeno), 1 x drilling and tapping machine Steinel Iodpfx Aaema Efys Uoar GT.6.52 Technical specifications: Spindle speeds: 500/630/1000/1250 rpm Tapping capacity in steel: M 6 Max. collet clamping diameter: 10 mm The machine can be inspected under power.

Stanje: rabljeno, Leto izdelave: 2001, Union KCU-130 horizontalni izvrtalni in rezkalni stroj z mizo, s krmiljenjem Heidenhain TNC430, X/Y/Z = 4000/3000/1500 mm, velikost mize 2000 x 2500 mm, nosilnost 20.000 kg, B-os 360°, vreteno BT50, avtomatski izmenjevalec orodij s 60 pozicijami (ATC), W-os, U-os, transporter za ostružke, notranje hlajenje preko vretena, varnostna kabina. Serijska št.: 1370022 (2001) Opomba: Nosilci orodij/orodje na fotografiji v izmenjevalcu orodij niso priloženi k stroju. Razpoložljiva orodja bodo posebej navedena. Iaodpox T Ddyjfx Aa Usr Opomba: Ta lot se nahaja v mestu Irvine. Na lokaciji ni na voljo nakladalne opreme; demontaža in nakladanje sta v stroških kupca. Vsa orodja so na voljo izključno, kot je posebej opisano.

Stanje: novo, Leto izdelave: 2024, I am selling the new four-side planer LEADERMAC COMPACT 430, year of manufacture 2024. Exhibition machine! Configuration with 4 spindles: Bottom: 7.5 kW / 10.0 HP Right: 7.5 kW / 10.0 HP Left: 7.5 kW / 10.0 HP Top: 7.5 kW / 10.0 HP Feed speed adjustable from 6 to 24 m/min. Feed motor: 7.5 kW / 10.0 HP with inverter Maximum workpiece width: 15–300 mm Maximum workpiece height: 10–200 mm All 6 spindles: 6,000 rpm Schneider touch screen with EASYSET electronic programming for working width, working height, and pressure height. Pressure system for short workpieces. Three-zone pneumatic material pressure system for feed. Total weight: 4,000 kg Total power requirement: 39 kW / 52 HP Fully operational. Isdpfx Asrfud Iea Uear Available immediately. Exhibition machine, completely NEW! Including CE marking and complete documentation!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, premer gredi: 50 mm, premer valja: 155 mm, skupna masa: 400 kg, moč: 1,5 kW (2,04 KM), vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, nujno zaustavitev, Brand: Sahinler Model: PK 35 Ijdpfswt Sy Asx Aa Uoar Year of manufacture: 2024, unused Power capacity (kW): 1.5 Voltage: 400 V Frequency (Hz): 50 Dimensions LxWxH (mm): 1000 x 750 x 1400 Weight (kg) approx.: 400 Units in stock: 4 Manufactured in: Turkey Maximum diameter (mm): 50 Comments: Unused machines at competitive prices, multiple units available in stock, foot pedal included.

Stanje: novo, Leto izdelave: 2026, Plazemska rezalna naprava za pločevino, kombinirana z vrtanjem in navojnim rezanjem Težka portalksa rezalna naprava, združena za vrtanje, plazemsko in plamensko (kisikovo) rezanje. Pogon z dvema motorjema, natančno pozicioniranje z zobniškim letvom in zobnikom na treh linearnih oseh ter brez zračnosti na rotacijskih oseh gorilnika. Ojačana konstrukcija portala in pogonov omogoča obvladovanje velikih obremenitev pri vrtalnih procesih. Nizkozračnostni, visokoprecizni zobniki ter izjemno toga in natančna vodila omogočajo gladko gibanje in odlično kakovost reza v vogalih in pri majhnih odprtinah. Prečna gibljivost (os Y) -- po naročilu Vzdolžna gibljivost (os X) -- po naročilu Navpična gibljivost (os Z) -- 500 mm GLAVNE ZNAČILNOSTI: ▪ Popolnoma avtomatizirana tehnologija za izdelavo in izvedbo programov ▪ Program temelji na 2D risbi kosa ▪ Operacije vrtanja/navojnega rezanja se lahko automatizirano pripišejo eni ali več odprtinam z enakim premerom ▪ Samodejno razporejanje izsekov in hitri premiki med odprtinami in deli z različnimi strategijami ▪ Samodejna menjava orodja, popolnoma programabilna, brez potrebe po posegu operaterja ▪ Referenčna ničelna točka programa za celoten postopek vrtanja in plazemskega rezanja v enem programu. Povsem kot pri običajnem rezanju pločevine – brez posebnih nastavitev ali postopkov s strani operaterja ▪ Samodejno merjenje razdalje med konico vrtala in materialom – merjenje ni potrebno s strani operaterja ▪ Samodejni vklop/izklop hlajenja orodja ▪ Nadzor gibanja glave za lomljenje ostružkov z nastavljivimi parametri Iaedpfsh I Eitsx Aa Usr ▪ Samodejni nadzor glave po programu ▪ Glava za vrtanje se po koncu vrtanja samodejno premakne v varni položaj ▪ Plazemska glava se samodejno pomakne na začetni položaj reza, poišče ploščo in začne rezanje ▪ Plazemska glava se samodejno premakne v varni položaj po končanem rezanju ▲ VRTALNA GLAVA moč do 29kW največji premer orodja za vrtanje 40 mm ▲ OPREMA ZA PLAZEMSKO REZANJE HYPERTHERM -- po naročilu ▲ MONTAŽA IN IZOBRAŽEVANJE VKLJUČENA Okvirni čas montaže in izobraževanja – 15 dni

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 15360599, največja hitrost vretena: 2.800 obr/min, potovalna razdalja osi X: 600 mm, pomik osi Y: 350 mm, pomik po osi Z: 383 mm, premer diska: 300 mm, TEHNIČNE PODROBNOSTI Pomik X-os: 600 mm Pomik Y-os: 350 mm Pomik Z-os: 383 mm Maksimalno območje brušenja: 600 x 350 mm Iodpfx Aexnwm Uea Ujar Standardna dimenzija magnetne plošče: 600 x 350 mm Premer brusne plošče: 300 mm Hitrost vretena: 2.800 obr/min Vpenjalna površina: 820 × 350 mm Maks. obremenitev mize: 400 kg Hitrost mize: 0,005–35 m/min Hitri pomik (prečni in navpični pomik): 4.000 mm/min PODROBNOSTI STROJA Krmiljenje: Siemens Električni podatki Obratovalna napetost: 400 V, 3 faze Omrežna frekvenca: 50 Hz Teža stroja: 2.200 kg OPREMA - Naprava za hlajenje - Avtomatski dreser brusne plošče

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, ALMI stroj za izsekavanje cevi AL2 za cevi z zunanjim premerom Ø48,3 (1 1/2″) in Ø60,3 (2”) mm Stroj za izsekavanje cevi za cevi z zunanjim premerom Ø48,3 (1 1/2″) in Ø60,3 (2”) mm enostavna montaža na steno idealen za dvojne kotne spoje Iaodpfexyyynox Aa Usr maks. debelina stene: 3 mm jeklo, 2,5 mm nerjavno jeklo, teža 15 kg

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, ALMI stroj za izrezovanje cevi AL1 za cevi z zunanjim premerom Ø26,9 (3/4″), Ø33,7 (1″) in Ø42,4 (1 ¼”) mm Iajdpfxoxyyyhj Aa Uor Stroj za izrezovanje cevi za cevi z zunanjim premerom Ø26,9 (3/4″), Ø33,7 (1″) in Ø42,4 (1 ¼”) mm enostavna montaža na steno idealno za dvojne kotne spoje maksimalna debelina stene: 3 mm jeklo, 2,5 mm nerjavno jeklo, teža 8 kg

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, ALMI AL-U za iztek cinka v ceveh z zunanjim premerom od Ø22 do Ø76 mm Orodje za izrez cevi za iztek cinka v ceveh z zunanjim premerom od Ø22 do Ø76 mm Za izrezovanje prezračevalnih rež v okrogle in pravokotne kovinske cevi od 22 mm zunanjega premera naprej Iedjxyyx Rjpfx Aa Uoar Enostavna namestitev na steno Maks. debelina stene: 3 mm jeklo, 2,5 mm nerjavno jeklo, teža 7 kg

Leto izdelave: 2011, obratovalne ure: 8.000 h, stanje: dober (rabljeno), številka stroja/vozila: 041-045, AUERBACH drilling and milling machine, model AX3 TLF, year 2011, in good condition. Photos, dimensions, and type plate visible in the pictures. Technical specifications: Longitudinal travel (X-axis) table: 1600 mm Transversal travel (Z-axis) column: 700 mm Cross travel (W-axis) boring head: 1300 mm Vertical travel (Y-axis) of the boring head: 800–1200 mm Rotary axes: - B-axis rotary table: 360 degrees - A-axis boring head: -25 to +15 degrees Drilling area – deep hole drilling: Diameter range: 3 – 32 mm Drilling depth in a single stroke: 1300 mm Maximum possible drilling depth: 1700 mm Main drive / deep drilling module: Rated drive power: 12 / 18.5 kW Speed range: 60 – 8000 rpm Iedpfx Aasg N Tb Ne Usar Spindle torque: 115 Nm Feed drive: Feed rate: 1 – 15 (in Y 1–10 axis) m/min Rapid traverse on all axes: 15 (Y-axis 10) m/min Machine dimensions / installation site: Weight – main unit: 12,000 kg Required installation space: - Width: 5,500 mm - Depth: 5,300 mm - Height: 3,400 mm Location: Kopalniana 72, Tarnowskie Góry, Poland

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 500 mm, dolžina pomika po osi Y: 250 mm, dolžina podajanja os Z: 160 mm, potovalna razdalja osi X: 500 mm, pomik osi Y: 250 mm, pomik po osi Z: 480 mm, največja hitrost vretena: 9.000 obr/min, hitrost pomika os X: 2 m/min, hitrost podajanja osi Y: 2 m/min, hitrost podajanja os Z: 1 m/min, hitrost vretena (min.): 100 obr/min, poteza s peresom: 160 mm, širina mize: 320 mm, dolžina mize: 880 mm, X-500, Y-250, Z- spindle stroke 160, W- machine head travel 480, table 880 x 320, max. 320 kg, SK 32 spindle taper, 100-9000 rpm, 5 kW, 60 Nm, Heidenhain TNC 124 control. Extensive accessories included. Iaedpfxoq R Rb Hj Aa Usr

Stanje: rabljeno, Leto izdelave: 2006, številka stroja/vozila: 185078, Offer 24435 Technical Data: - Table surface: 1700 x 550 mm - Manual travel paths X / Y: 1300 x 500 mm - Drilling machine, make: MAXION, type: BT 15 GL - Drilling capacity up to: 18 mm - Tapping capacity up to: M 10 - Drill spindle mount: MK 2 - Drilling spindle stroke with fine depth adjustment: 90 mm - Pneumatic feed unit: PV 12 - Throat depth: 670 mm - 4 spindle speeds: 320 / 560 / 1000 / 1600 rpm - Motorized stroke of drilling unit - Table clamping x + y - Minimum quantity lubrication - Pneumatic connection: 6 bar - Electrical connection: 400 V Iodout Uzaepfx Aa Ujar - Space requirement (approx.): W 1750 x H 1600 x D 1000 mm - Weight (approx.): 1200 kg - Various guiding sleeves

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), Machine equipment with 2 working zones. 2 workpieces can be loaded independently of each other. Workpiece dimensions: - Length: 110 - 800 mm - Width: 20 - 1700 mm - Height: 14 - 60 mm - Working height: 900 mm Iodpfomrqriox Aa Uoar Machine configuration: - 1 x horizontal drilling station, 0.9 kW; spindle speed 7,200 rpm - Max. drilling depth: 30 mm - Drill chuck: 10 mm - Overall drill length: 85 mm - 2 x gluing and dowel insertion stations - 2 x dowel insertions, dowel projection 15-20 mm - Dowel center distance: 96 mm - 2 x vibratory bowl feeders for dowels - 1 x glue pump 18:1 - 2 x electronic glue monitoring units (ELC) - Workpiece support table: 1700 mm - 8 x workpiece clamping cylinders - Central stop for 4 working zones - Central lubrication with hand pump for grease lubrication - NC height adjustment positioning for drilling and dowel stations (Z axis) - Axis with position control, traversing speed 12 m/min KOCH Numeric positioning control with 1 NC axis (X)

Stanje: novo, Automatic Sheet and Profile Shot Blasting Machine Primarily used for surface cleaning operations on products such as sheet metal, NPI, NPU, angles, profiles, etc. The parts requiring shot blasting are transported via roller conveyors at both the infeed and outfeed of the machine. Turbines are installed at appropriate angles within the machine body to enable thorough shot blasting of part surfaces from both above and below. A key advantage of this system is the ability to process products quickly. Semi-finished and finished goods can be conveyed efficiently through the roller conveyor and transport system. Ijdpfxeghayws Aa Ujar The digital speed control integrated into our machines enables adjustment for each load according to the type of workpiece and the required blasting surface. The machine is engineered and manufactured based on the size, weight, and daily throughput requirements of the components to be shot blasted. Conveyor lengths can be extended or shortened upon request.