Stroj za vrtanje in rezkanje

AUERBACH AX3 TLF

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 83 mm, stružna dolžina: 1.000 mm, premer struženja: 570 mm, premer struženja nad zgornjim sanežem: 340 mm, premer tulec: 80 mm, hod vretena: 200 mm, skupna masa: 3.200 kg, zunanji premer vpenjalne glave: 250 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Machine is in very good condition. Available immediately! Can be tested under power. Gjdpfx Ajwxw S Ijb Tskf

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, premer spodnjega valja: 495 mm, premer zgornjega valja: 515 mm, premer stranskega valja: 355 mm, premer valja: 495 mm, dolžina valja: 2.000 mm, delovna širina: 2.000 mm, najv. debelina jeklene pločevine: 60 mm, skupna masa: 29.200 kg, skupna dolžina: 5.770 mm, skupna širina: 2.390 mm, skupna višina: 2.760 mm, moč: 55 kW (74,78 KM), Oprema: dokumentacija / priročnik, Zamenljiv zgornji valj 410 mm Godpfxov Nhkwj Ab Tokf

Stanje: rabljeno, Grinding diameter 350 mm Grinding length 1500 mm Centre height 175 mm Machine weight approx. 3 t High-end Kellenberger 1500U Ideal for spindle manufacturers or spindle rebuilders Gkedpfxot Ii Rrj Ab Tsf - BEMA internal grinding attachment with separate, cooled motor Grinding spindle and internal grinding spindle motor electrically interlocked! The internal grinding spindle can only be switched on when in position A quantum leap in safety - Infinitely variable grinding spindle speed 1000-1500 rpm - Infinitely variable internal grinding spindle speed 0-100% - Digital display of grinding spindle speeds - Swivel angle display on the upper table - Swivel angle display on the grinding spindle headstock - Marposs touch sensor for external grinding only - Marposs fluid touch sensor for internal grinding - Centre height up to 250 mm possible Machine already delivered. An identical machine can be built with additional options. The machine tool does not currently meet the essential safety and protection requirements as set out in the BetrSichV 2015. The required minimum safety objective must be determined by a risk assessment in accordance with the BetrSichV.

Stanje: rabljeno, Leto izdelave: 2016, Travel distance - X: 800 mm Gkjdpfx Abowq S Als Tjf Travel distance - Y: 450 mm Travel distance - Z: 510 mm Control: HEIDENHAIN TNC620 Table dimensions (L x W): 1,000 x 450 mm Number of tool changer positions: 30 Vertical machining center | DOOSAN DNM 4500 equipped with 30-position tool changer, through-spindle coolant system (IKZ), and chip conveyor. The machine has only 5,365 spindle hours. The machine is in well-maintained condition. A video of the machine at its current location is available upon request. Technical data of the machine will follow shortly. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM4500 | DNM-4500

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, Travel X/Y/Z: 630mm/530mm/465mm, Tool holder: SK40, Spindle speed: 12,000 rpm, Tool stations: 32, Table size X/Y/Z: 920mm/540mm, Machine dimensions X/Y/Z: 2600mm/2350mm/2750mm, Weight: approx. 6,500kg. Documentation available. On-site inspection is possible. Gkodewm Nphjpfx Ab Tsf

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, skupna masa: 1.195 kg, volumenski pretok: 7,25 m³/h, obratovalni tlak: 13 letvica, vhodna napetost: 400 V, ATLAS COPCO GA 37 VSD ff rotary screw compressor Variable speed drive (inverter controlled) Equipped with a refrigerated air dryer Motor: 37 kW Capacity: 7.25 m³/min Pressure: 13 bar Gjdpfet Hdh Nox Ab Tokf Operating hours: 13,200 h The compressor is fully operational

Leto izdelave: 2018, Stanje: rabljeno, x-axis travel: 1600 mm y-axis travel: 1300 mm z-axis travel: 700 mm Distance between uprights: 1500 mm Distance spindle center to table: 225–925 mm Table size: 1800 x 1300 mm Table load: 4000 kg T-slots (Width x Spacing x Number): 22 x 160 x 8 mm Spindle taper: HSK-A 63 Spindle speed: 24,000 rpm Spindle motor: 25/33 kW Spindle motor torque: 72.6/95.8 Nm Rapid traverse (X-Y-Z axis): 30,000 mm/min Feed rates X/Y/Z axis: 1–20,000 mm/min Tool changer: 20 positions Max. tool diameter: 100/130 mm Max. tool length: 300 mm Max. tool weight: 8 kg Total power requirement: 80 kVA Machine weight approx.: 22 t Machine dimensions (LxWxH): 5660 x 5295 x 3930 mm CNC control: Heidenhain TNC 620 Spindle: IBAG electric spindle 24,000 rpm HSK-A63 Linear scales: Heidenhain Tool changer: 20 positions Chip conveyor – spiral: 2 pcs. Used CNC high-speed portal milling machine with extensive accessories at a special introductory price. Key manufacturers of the components used in this stock machine: · Controller and servo motors by Heidenhain, model TNC 620 · Ball screw support bearing – NSK Japan · X-axis ball screw – Hiwin Taiwan · Y-axis ball screw – Hiwin Taiwan · Z-axis ball screw – Hiwin Taiwan · 3-axis linear guides – THK Japan or Rexroth Germany Gkjdpfx Aohx R Dveb Tef · Electric spindle unit – HSK A63 24,000 rpm by IBAG · Linear encoder – Heidenhain · Pneumatic system – SMC Japan · Lubrication – Showa Japan · Covers – Hema · Air conditioning – Kaokung Taiwan · Spindle water cooler – Taiwan-Punkt · 3-axis cable carrier – Igus Germany · Coupling – KTR Germany · Machine enclosure – Mecano Germany · Relay – Omron · Electrical system – Schneider Germany · MPG manual pulse generator – Tosoku Japan For further information on the machine, standard accessories, and special accessories, please refer to the attachment. We are of course happy to organize delivery to your premises including assembly/commissioning, handover ready for operation, and on-site training.

Leto izdelave: 2001, Stanje: rabljeno, Max. pressure: 500 t, max. operating temperature: 370°C, oil-heated, oil-cooled, with secondary circuit for heat recovery, overhauled in 2014. Gedpfsdwf Dbox Ab Tskf

Leto izdelave: 1994, Stanje: dober (rabljeno), Ziersch & Baltrusch Surface Grinding Machine - Equipped with Formmaster 6 / 30 - Equipped with belt filter system - Equipped with coolant system - Width: 250 cm - Depth: 200 cm - Height: 220 cm Machine is in good condition and fully operational; it can be inspected and tested under power on site. Shipping also possible abroad. Inspection: Please note that, to avoid any misunderstandings, the item can and should be inspected and tested under power prior to purchase. Please ask any questions before purchase to avoid uncertainties. For general enquiries or to arrange an inspection appointment, I am available anytime via the phone number listed below or above. Subject to prior sale and errors in description. Godpfxjk Ixl Ao Ab Tskf VAT will be itemized separately on my invoices. Shipping via freight forwarder.

Stanje: novo, Leto izdelave: 2024, Protec welding turntable, 20,000 kg load capacity Steplessly adjustable speed: 0.05 - 0.35 rpm Hand-held remote control Foot pedal remote control available at an additional cost of €390 Height: 700 mm Diameter: 2,000 mm Gedpfx Asid Szkeb Tokf