Impuls Engineering Gmbh Automatische-Tubenfüll-Maschine D nakup rabljenega (101.411)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Technical description with the following main data: Load capacity: 3,000 kg static distributed load Useful lift: 1,100 mm Closed height: 250 mm Overall height: 1,350 mm Platform length: 1,700 mm Platform width: 1,200 mm Material: Smooth sheet metal Lift time: approx. 29 sec. for full stroke Lowering time: dependent on load Electrical connection: 3 x 400 V / 50 Hz + protective earth, with 16 A CEE plug and 3 meters of cable Motor: 2.2 kW, 1,400 rpm Solenoid valve voltage: 24 V DC Degree of protection: IP54 overall, solenoid valve and switches IP65 Kodpfxoupztzj Al Njlr Power unit placement: integrated into lift table Control box: dead-man control incl. 2 m cable Total weight: approx. 455 kg Base frame adjustable with pallet truck or forklift

Stanje: novo, Leto izdelave: 2024, - Mobile scissor lift table with base frame and aluminium worktop, dimensions 1000 x 600 mm - Very lightweight yet robust construction - Ideal for service technicians - Lifting operation (up/down) is controlled via a hydraulic foot pump Klodofhbvnopfx Al Nor - Load capacity: 200 kg - Construction height: 400 mm - Usable lift: 610 mm - Maximum height: 1010 mm - Platform dimensions: 1000 x 600 mm - Net weight: approx. 35 kg - Steering castors: 2 with brake, 2 without brake - Wheel diameter: 125 mm - Colour: Aluminium grey

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Technical description with the following main data: Load capacity 1000 kg static distributed load Usable lift 775 mm Closed height 85 mm Overall height 860 mm Platform length 1450 mm Platform width 1140 mm Material Smooth sheet steel Lifting time approx. 20 sec. for full stroke Lowering time load-dependent Electrical connection 3 x 400 V / 50 Hz + grounding, with 16 A CEE plug and 4-meter cable Motor 1.1 kW Paint finish Blue-grey RAL 7031 Power unit positioning free-standing Control box Deadman control including 2 m cable Total weight approx. 270 kg Standard version: The lift tables comply with EN 1570 E and are CE-marked. All steel components are cleaned, primed with rust-inhibitive paint, and coated with two-component polyurethane paint. The lift tables are equipped as standard with all-round safety contact strips made of aluminum and maintenance props for repair and service work. Our lift tables are designed for approximately 5 cycles per hour at full load over 8 hours/day. For more intensive use, we offer special lift tables. Ksdpfx Asiwi Injl Nolr

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna višina: 1.020 mm, gradbena višina: 410 mm, dvižna višina: 600 mm, lastna masa: 150 kg, nosilnost: 350 kg, skupna dolžina: 1.900 mm, skupna širina: 740 mm, trajanje garancije: 24 meseci, NIVEAU - Scissor Lift Table HS 350 Gross without worktop Description: - Mobile scissor lift table with double horizontal scissors, basic version without worktop; with platform base frame for mounting various worktops; equipped with 4 swivel castors, 2 of which have brakes; wheel diameter 125 mm; operated via foot pump Kodpfjh A Hxiox Al Nolr Load capacity in kg: 350 Weight in kg: 150 Useful lift in mm: 610 Construction height in mm: 400 Total height in mm: 1010 Platform size in mm: 1900 x 740

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Technical Specifications: - Motor power: 2.2 kW S1 - Max. saw blade diameter: 350 mm - Saw blade bore: 30 mm - Cutting time per stroke: 1.5 sec. - Saw spindle speed: 3800 rpm - Air consumption per cycle: 5 L - Working table height: 900 mm - Extraction port: 2x100 mm - Operating pressure: 7 - 8 bar - Net weight: approx. 200 kg - Required airflow: 1000 m³/h - Voltage: 400 V / 50 Hz, 3-phase - Cutting capacity in mm: 45 x 230 60 x 210 90 x 180 Klsdpfxofhbuye Al Nsr 100 x 125 Standard Equipment: - Saw blade feed with pneumatic drive - Automatic motor brake - Set of operating wrenches - Emergency stop mushroom switch - Feed speed regulator for saw blade - Fixed vertical safety guard - Upper safety pressure device (pneumatic safety cover) - Minimum extraction speed: 28 m/sec - Colours: Base frame light grey RAL 7035, doors tele grey RAL 7046, safety guard and cover zinc yellow RAL 1018 - Incl. HM (carbide-tipped) circular saw blade for wood 350x3.5x2.4x30mm Z72

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, - Mobile scissor lift table with metal sheet platform - Lifting up/down is operated via a hydraulic foot pump - Load capacity: 300 kg - Minimum height: 400 mm - Lifting stroke: 610 mm - Maximum height: 1010 mm - Platform dimensions: 1000 x 600 mm - Net weight: 75 kg - Castors: 2 swivel castors with brake, 2 without brake - Wheel diameter: 125 mm Klsdpfxefnp Rpe Al Nsr - Powder-coated finish: Base frame and platform frame in light grey RAL 7035, scissors in violet blue RAL 5000

Stanje: rabljeno, In order to ensure the long-term performance, precision, and operational reliability of your sheet metal processing machines, it is essential to carry out regular maintenance, repair, and inspection tasks in accordance with manufacturer specifications and legal requirements. Our qualified service technicians perform these tasks professionally and reliably. This includes: • Maintenance work to ensure trouble-free operation (cleaning, lubrication, inspection, and replacement of wear parts) • Repairs in case of malfunctions or breakdowns, including diagnostics, restoration, and adjustment • Inspections in accordance with DGUV Regulation 3 and the Machinery Directive to check safety and performance Kodpjygk Epjfx Al Nslr After completion of the work, you will receive comprehensive documentation of all measures taken, including test reports and recommendations for any follow-up actions. We would be pleased to provide you with a tailored quote or schedule a maintenance appointment according to your specific operational requirements.

Leto izdelave: 2006, stanje: zelo dobro (rabljeno),

Stanje: novo, Leto izdelave: 2024, Frame and Edge Press with Manual Hydraulic Press Units, single-sided, stationary > robust frame-welded construction > frame press unit with continuous left-hand support > 1 sliding carriage for width adjustment with positioning lock in 50 mm hole grid system, equipped with central locking drive bolt > 2 horizontally and infinitely adjustable manual hydraulic press units, each with 20,000 N pressing force and 60 mm stroke > 5 roller-mounted vertical pressure beams made from thick-walled profile tube, electro-galvanized, with manual hydraulic press units, each with 20,000 N pressing force and 60 mm stroke. Press units adjustable within a 50 mm hole grid. Counter support adjustable in 6 steps with anti-drop safety. Counter support and pressure plate, 140 mm long, 80 mm deep. > 1 hold-down device, electro-galvanized, for manual suspension, with screw-down pressure > Finish: grey white RAL 9002, pressure plate and counter support gentian blue RAL 5010. Klsdpfx Aeyuxkjl Ner > External dimensions (W x H x D): 3340 x 2350 x 730 mm (long version: 3690 x 2350 x 730 mm) > optionally available with more or fewer vertical pressure beams (see accessories list) Usable size (W x H in mm) as frame press: 2700 x 1800 Usable size (W x H in mm) as edge press: 3000 x 1800 Price plus packaging: €92 net Special solutions available on request!

Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: nepreverjeno, številka stroja/vozila: 164543A01, Sistem za pomivanje žlic proizvajalca Walter Maschinenbau GmbH, robustna industrijska naprava za avtomatizirano čiščenje mešalnih in transportnih žlic. Naprava deluje z zmogljivimi visokotlačnimi šobami in rotirajočimi razpršilnimi glavami, ki zanesljivo odstranijo tudi trdovratne ostanke betona in materiala. Namenjena je neprekinjenemu delovanju, ima stabilno jekleno konstrukcijo in lahko – glede na izvedbo – uporablja tako svežo kot reciklirano vodo. Idealna za mešalnice in podjetja z velikim obsegom čiščenja. Ksdpfjxxpp Aex Al Njlr Stroj rabljen, nepreverjen in brez jamstva. Vračilo ni možno.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, nosilnost: 4.000 kg, dvižna višina: 10.000 mm, napetost baterije: 48 V, lastna masa: 9.000 kg, Splošno: HUBTEX 2125-PU/SO z modelom MQ 40 je električni večsmerni bočni viličar s nosilnostjo 4 tone in prečno kabino. Ta viličar je primeren za skladiščne prostore, kjer sta potrebni maksimalna prilagodljivost in okretnost v ozkih prehodih za premikanje tovora do 4000 kg. M = večsmerno krmiljenje Q = prečna kabina 40 = 4.000 kg 2125 = serija PU = Vulkollan pnevmatike SO = nagibanje in spuščanje vilic, izvlečne vilice do 1500 mm, hidravlično nastavljiva širina vilic Dodatna oprema/Predelava: Kljdpfxox Aqaqs Al Nsr - Kameri na desni in levi strani vilic z monitorjem v kabini - Pozicijski laser na desni in levi strani vilic - Mehko gibanje pred odlaganjem vilic in pri prečkanju stopnic teleskopskega izvleka

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, skupna širina: 2.350 mm, skupna višina: 2.420 mm, skupna dolžina: 3.600 mm, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 400 V, moč: 1,6 kW (2,18 KM), raven hrupa: 75 dB, Splošno: Natančna konfokalna merilna postaja za optično merjenje višine in strukture. Opremljena s konfokalnim senzorjem PD562 in merilno kamero PD563. Sistem je namenjen visokoločljivostnemu merjenju površin in geometrije. Kedpfxex Ap I He Al Nelr

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2009, obratovalne ure: 22.029 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 80 t, širina odprtine za polnjenje: 1.000 mm, dolžina polnilne odprtine: 1.400 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 16.000 kg, moč: 45 kW (61,18 KM), leto zadnje generalne obnove: 2025, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 hours as of December 2025 Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Filling chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput (at bulk densities): – 30 kg/m³: approx. 6.0 t/hour – 50 kg/m³: approx. 10.5 t/hour – 100 kg/m³: approx. 17.5 t/hour Bale weights (at approx. 1.2 m bale length, depending on material): up to 600 kg PLC control: Siemens S7-300 Display panel: pulsotronic Machine dimensions (installed): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 16 t Special equipment: • Wear-resistant floor made of HARDOX steel • Special press ram for compacting “difficult” materials and loose bulk materials with small particle size • Control cabinet air conditioning • Elevated machine feet, 200 mm Remarks: Kledox A U Ncopfx Al Nor The machine has been serviced and partially overhauled in our workshop. The following works have been performed and parts renewed: • Removal and disassembly of the press ram, maintenance of the mechanics, replacement of the following plastic wear strips and rails: o Plastic wear strips left/right underneath the press ram o Plastic wear strips left/right above the press ram o Central plastic main wear plate (support plate) under press ram • Steel guide rails (left/right, upper frame) replaced • Complete four-part floor plate replaced with wear-resistant HARDOX steel • Wire inlet rails in press floor newly welded and smoothed • Counter blade replaced (two-part, in frame) • Knife gap adjusted to approx. 2.5 mm • Removal and disassembly of the tying and twisting unit, mechanical overhaul, all groove ball bearings and axial ball bearings of twister shafts replaced, wire cutters cleaned and adjusted, chains lubricated and tensioned • Support roller in front of the twister shafts replaced • All hydraulic hoses replaced • Oil and air filters replaced • Main hydraulic cylinder checked for leaks • Hydraulic oil is only one year old, was chemically analyzed and is still in good condition, hence was not replaced, but can continue to be used • General maintenance performed Finally, the baler was tested in manual and automatic mode – see video for machine function test.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Počasni drobilnik z menjalnikom Širina reza – 250 mm Moč motorja – 3 kW Hitrost rotorja – 100 obr./min Število rotorskih nožev – 20 kosov Število statorskih nožev – 2 kosa Na voljo 9 kosov, brezhibno stanje Zmogljivost do 50 kg/h Kodpfx Alsyf I Tbe Nolr Cena 1.350 EUR na kos

Stanje: dober (rabljeno), Horizontalni tračni brusilnik Delovna višina: 950 mm Višina: 1300 mm Širina: 700 mm Globina: 1000 mm Teža ca. 80 kg (neto) Ksdpfoxdb D Ajx Al Nelr

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, GHD Georg Hartmann Maschinenbau GmbH, SELECTRA 25, 2014, dobro ohranjeno. Kapaciteta: do 3000 izdelkov/uro Dimenzije izdelka: dolžina: 160 - 400 mm, višina: 50 - 150 mm Moč: 5 kW Zrak: 6,0 bar Pripravljeno za odpremo Kledpfsylurkox Al Ner

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, dolžina transportnega traku: 2.250 mm, širina transportnega traku: 600 mm, Oprema: Na voljo je tipska ploščica, Stock no.: 503508 Machine / Device type: Conveyor belt Manufacturer: MK Maschinenbau Kitz GmbH Kljdpfxsuiwrre Al Nsr Model: GUF-P 2000 AF 2550-600 Year of manufacture: 2008 - Belt conveyor for light to medium-weight conveyed materials. Flat belt conveyor: Belt width: 600 mm Belt length: 2250 mm Load capacity: 75 kg

Stanje: novo, Leto izdelave: 2024, Facility managers and property management companies are well aware of the challenge: On collection day, when the refuse collection vehicle arrives, all bins must be positioned at the pick-up point. If waste containers are typically stored in the underground garage, the caretaker must transport every bin up the ramp. This process is time-consuming, physically demanding, or sometimes simply impossible for one person. A 240-liter waste bin filled with compacted paper can weigh over 200 kg, while a 1,100-liter waste container can exceed one ton. In such cases, the caretaker needs a second person’s assistance, which increases labor costs. Weber offers time- and health-saving solutions for this issue. Contact us about our bin frames for 1,100-liter waste containers and our trolley systems for 120- and 240-liter waste bins. And of course, we also supply battery-powered towing vehicles. - Health-friendly - Efficient - 400 kg payload - Galvanized - Interconnectable - Professional equipment – not suitable for public road traffic Adapters: - Ball hitch Klsdpoi Nnruofx Al Njr - Drawbar eye

Leto izdelave: 1972, stanje: nepreverjeno (rabljeno), številka stroja/vozila: SW3a DP. U. AP. 40923 , Guillotine Shear: A used guillotine shear (swing beam shear) by manufacturer Wieger. On this shear, the blade gap does not need to be adjusted when cutting different sheet thicknesses. Max. cutting capacity: 10 mm Model/Type: SW3a DP. U. AP. 40923 (with lamellar working clutch with brake, electro-pneumatically operated) Year of manufacture: 1972 Kjdped Eg Ngofx Al Njlr Condition: unchecked - used

Stanje: novo, Leto izdelave: 2024, teža obdelovanca (maks.): 12 kg, • Weight approx. 11.8 kg • CNC-manufactured from A 600, anodized surface • Working range up to 506 mm diameter • No additional material handling required, saving crane capacity, man-hours, and energy When machines are used for this purpose, materials have to be craned to and from the machine and the picking area – the time lost for just 2 center drillings is immense. • Ready for use in seconds • Infinitely adjustable clamping across 3 diameter ranges • Produce a center hole in seconds (directly after sawing on the machine) • All components are manufactured in Germany • Center holes according to DIN 333 Form A, 60°, 5, 6.3 and 8 mm. Other sizes available upon request. A "must have" for every steel dealer! • Sale price: EUR 5,950 net plus VAT ex stock, free shipping within Germany • Scope of delivery: Fixture, Fein cordless drill, charger, • 2 batteries – complete in case Klodpfsri Sicox Al Ner • 3 center drills 5, 6.3 and 8 mm DIN 333 A with flat, incl. 3 tool holders, one 6 m

Leto izdelave: 1993, stanje: dober (rabljeno), Wickert Maschinenbau GmbH Landau Vulcanizing Press Year of manufacture: 1993 Machine no.: 2758 Kledpfx Alsn Sm A Se Njr Press force: 2,800 kN Heating plates: 500 x 500 mm Heating: electric Plate opening: 200 mm Control: Siemens S5 OP17 (conversion to S7 possible) Including sliding table, vacuum pump, vacuum chamber, storage tank In good used condition. With CE marking.

Leto izdelave: 1990, stanje: dober (rabljeno), Wickert Maschinenbau GmbH Landau vulcanizing press Year of manufacture: 1990 Machine no.: 2559 Pressing force: 2800 kN Heating plates: 500 x 500 mm Heating: electric Kjdpfon Sm Ayox Al Nolr Plate gap: 200 mm Control: Siemens S5 OP17 (conversion to S7 possible) Includes sliding table, vacuum pump, vacuum chamber, storage tank Good used condition. With CE marking.

Stanje: dober (rabljeno), "WMG WM 6.3 / 8.0 / 6.3 x 10 - 3 Roll Crusher" for Sale Kodpfx Alsgtxnre Nelr Manufacturer: WMG Westfälische Maschinenbau Gesellschaft mbH Model: WM 6.3 / 8.0 / 6.3 x 10 Roll width: 1,000 mm Included: Drives

Stanje: novo, Leto izdelave: 2026, potovalna razdalja osi X: 2.800 mm, pomik osi Y: 1.900 mm, pomik po osi Z: 1.500 mm, ROTAMILL 2819 MT with Head Change System Machine Configuration: - Turning technology package - 6-axis design - Head change functionality - 3-jaw chuck with individual adjustment - NC rotary table, Ø1,800 mm, 300 rpm - NC fork-type milling head M-Series (A and C axes) - Milling spindle CYTEC CST-42-180-S - Tool chain magazine, 54 slots, HSK-A(T)63 - CNC control HEIDENHAIN TNC 640 - Switchable between coolant supply and air blast supply - Workpiece measuring, BLUM TC 60 probe - 3D kinematic calibration software - Heidenhain - Kinematic tool kit - CAD import (.step; .iges; .dxf) - Remote maintenance (teleservice) - User and maintenance training (1 day), excluding travel expenses and per diem - Loading and (sea-worthy) packaging costs FCA Jülich according to Incoterms 2020 - Commissioning within Germany including travel expenses and per diem Technical Data Travel X-axis = 2,800 mm Travel Y-axis = 1,900 mm Travel Z-axis = 1,500 mm Rapid feed in X, Y, and Z = 50 m/min Acceleration in X, Y, and Z = 4 m/s² Feed force in X, Y, and Z = 10,000 N NC Rotary Table - Faceplate, standard = Ø 1,800 mm - Interference circle diameter = Ø 2,200 mm - Table load – milling, max. = 6,000 kg Drive C1 axis - Rotary table HS - Rotation range = infinite - Max. speed = 300 rpm - Rated torque = 7,473 Nm - Clamping torque = 13,000 Nm NC Fork Milling Head M-SERIES A-axis drive - Swivel range = ±110° (60 rpm) - Max. motor speed = 100 rpm - Max. feed = 600°/s - Rated torque = 840 Nm - Clamping torque = 4,000 Nm C2-axis drive - Swivel range = ±360° - Max. motor speed = 65 rpm - Max. feed = 390°/s - Rated torque = 1,020 Nm - Clamping torque = 4,000 Nm Milling Spindle CS-42-180 S (*) - Power, S1 (S6-40% duty cycle) = 42 (53) kW - Rated speed = 2,000 rpm - Torque, S1 (S6-40% duty cycle), max. = 201 (253) Nm - Max. speed = 12,000 rpm - Tool holder = HSK-A63 Accuracies / according to VDI / DGQ 3441 - P (X,Y,Z) = 0.012 mm - P (C, A) = 5'' - Ps (X,Y,Z) = 0.008 mm - Ps (C, A) = 3'' Tool Chain Magazine with Double Gripper - Tool stations = 54 - Tool holder = HSK-A63 - Station spacing = 110 mm - Tool diameter fully loaded = Ø 105 mm - Max. tool diameter = Ø 150 mm - Max. tool length = 300 mm - Max. tool weight = 8 kg Kedpfx Astwatdsl Nelr Space Requirement & Weight Length (X) = 6,830 mm Width (Y) = 6,970 mm Height (Z) = 5,150 mm

Stanje: novo, Leto izdelave: 2026, potovalna razdalja osi X: 2.200 mm, pomik osi Y: 1.600 mm, pomik po osi Z: 1.200 mm, ROTAMILL 2216 *Wide selection of rotary table and milling head options available* Machine Configuration - NC rotary table, Ø1,800 mm - NC fork-type milling head M-Series (A and C axes) - Milling spindle - CST-42-180-S - Chain tool magazine, 54 positions, HSK-A(T)63 - Chip conveyor - CNC control HEIDENHAIN TNC 640 - Turning technology package - 2-position automatic head change magazine - Machine prepared for wet machining - Switch-over between coolant supply and compressed air supply - Extraction unit approx. 3,000 m³/h - Workpiece measurement, BLUM TC 60 probe - Tool measurement, BLUM LaserControl Single NT - 3D kinematics calibration software - Heidenhain - Kinematics tool kit - CAD import (.step; .iges; .dxf) - Remote maintenance (teleservice) - User and maintenance training (1 day), travel and expenses excluded - Loading and (sea-worthy) packaging costs FCA Jülich according to Incoterms 2020 - Commissioning within Germany incl. travel and expenses Technical Data Travel X-axis = 2,200 mm Travel Y-axis = 1,600 mm Travel Z-axis = 1,200 mm Portal clearance, overhead gap (Y) = 2,250 mm Portal clearance (Z) = 1,465 mm Total weight, approx. = 41,000 kg Feed rate in X, Y and Z = 50 m/min Acceleration in X, Y and Z = 4 m/s² Feed force in X, Y and Z = 10,000 N NC Rotary Table - Face plate, standard = Ø 1,800 mm - Interference diameter = Ø 2,200 mm - Table load – milling, max. = 6,000 kg Drive C1-axis - Rotary table HT - Swivel range = unlimited - Max. speed = 30 rpm - Nominal torque = 7,473 Nm Klsdpfx Aler Hn Szs Ner - Clamping torque = 13,000 Nm NC Fork Milling Head M-SERIES Drive A-axis - Swivel range = ±110° (60 rpm) - Max. motor speed = 100 rpm - Max. feed = 600°/s - Nominal torque = 840 Nm - Clamping torque = 4,000 Nm Drive C2-axis - Swivel range = ±360° - Max. motor speed = 65 rpm - Max. feed = 390°/s - Nominal torque = 1,020 Nm - Clamping torque = 4,000 Nm Milling Spindle CS-42-180 S (*) - Power, S1 (S6-40% duty cycle) = 42 (53) kW - Nominal speed = 2,000 rpm - Torque, S1 (S6-40% duty cycle), max. = 201 (253) Nm - Max. speed = 12,000 rpm - Tool holder = HSK-A63 Accuracies / as per VDI / DGQ 3441 - P (X,Y,Z) = 0.012 mm - P (C, A) = 5" - Ps (X,Y,Z) = 0.008 mm - Ps (C, A) = 3" Chain Tool Magazine with Double Gripper - Tool positions = 54 - Tool holder = HSK-A63 - Position spacing = 110 mm - Tool diameter fully equipped = Ø 105 mm - Max. tool diameter = Ø 150 mm - Max. tool length = 300 mm - Max. tool weight = 8 kg Space requirements & Weight Length (X) = 6,830 mm Width (Y) = 6,970 mm Height (Z) = 5,150 mm