Homag Optimat Pfs 700/15 nakup rabljenega (22.273)

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, HOMAG SAWTEQ B-400 profiLine PROFI HPL 400/43/22 Napajanje: 400 V Y/230 V N, 3-fazno, 50 Hz Maksimalni obratovalni tok pri polni obremenitvi: 44 A Varovalka: 50 A Krmilna napetost: 24 V Pgodpfoy Ezvkjx Agxjk Dimenzije: 6514 x 9963 x 4786 mm Teža: 5500 kg

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ferwood koda: RS0003616 - Koda proizvajalca: 2-083-02-7120 - Stanje: Kot novo (razstavni artikel) - Funkcionalnost: Popolnoma delujoče - Združljiv stroj: - Teža: 2,5KG - Dimenzije: 36X26X21 - Če vas zanima, nudimo servisni pregled, kontaktirajte nas. Pgjdpfjyz T Ttox Agxek

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NEW-11, lastna masa: 546 kg, največja dovoljena obremenitev: 2.166 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 2.760 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 300 mm, vzmetenje: drugo, velikost pnevmatike: 195 / 50 R 13, največja hitrost: 100 km/h, barva: srebrn, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2026, zavore: drugo, SARIS K1 276 150 2700 2-Way Rear Tipper NEW VEHICLE Internal dimensions: 276cm x 150cm Side wall height: 30cm Loading height: 67cm Gross vehicle weight: 2700Kg Payload: 2154Kg Braked tandem trailer Overrun brake and handbrake by KNOTT 2x 1350Kg axles with brakes Low chassis Fully welded hot-dip galvanized steel frame Aluminum sideboards with tension locks Drop-down and removable on all sides 15mm thick, slip-resistant, robust phenolic plywood floor Additional steel plate on wooden floor Automatic support wheel with 400Kg static load capacity 6 noise-reducing lashing eyes with 800Kg tensile strength Reinforced 13" C-rated tires with steel valve M+S tires Net/rope hooks on the frame 13-pin plug connector LED marker lights at the front Rear lights with reversing light, NSL, and triangular reflectors Upper frame mounted on rubber bushings Large rear tipping angle of 48 degrees Manual pump with adjustable handle OPTIONAL ACCESSORIES PERMANENTLY DISCOUNTED FROM FEBRUARY 2026 - 100km/h equipment (shock absorbers) - Spare wheel with holder - Without sideboards (discount) - Increased sideboard height to 35cm - Black Edition (powder-coated black sideboards and rims) - Loading ramps - U-profile for attaching original SARIS ramps - Electric tipping control - Battery charger - Remote control - Bluetooth remote control - Emergency hand pump in combination with electric control - Safety props for maintenance work with tipped vehicle - Full LED lighting - Anti-theft device - Fine or coarse-meshed net - H-frame - Leaf mesh sides in various heights, also enclosed - 30cm sideboard extensions with tension locks - Flat tarpaulin with or without bows - High tarpaulin 160cm or 180cm Further accessories available on request! Plus shipping to Gera and vehicle registration documents €200 net Pictures for illustration only; may show optional accessories subject to surcharge. Haven’t found the right trailer yet? We stock 50–100 vehicles permanently, ready for immediate pickup. Our workshop is open weekdays from 8:00am to 5:00pm for all types of repairs. Axle repair specialist, including for caravans. Wide selection of rental trailers. Pedpsghpclefx Agxsgk Additionally, we offer a large range of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website, or drop by directly.

Stanje: zelo dobro (rabljeno), Prodajam profesionalni defibrilator/monitor LIFEPAK 15, cenjen model podjetja Physio-Control/Stryker, letnik 2017. Naprava se popolnoma zažene – zaslon, meni in prikaz ritmov delujejo brezhibno (vidno na fotografijah). Oprema in funkcije: • Monitor/defibrilator LIFEPAK 15 – REF 99577-001390 • Serijska številka: 45974928 • Leto proizvodnje: 2017 • Dva akumulatorja LP15 MPB • Vgrajen termalni tiskalnik • Moduli: EKG, SpO₂, NIBP, CO₂ (priključki vidni na slikah) • Ročni način in AED • Velik barvni zaslon • Originalna stranska in zgornja torba Stanje: Rabljena oprema, v dobrem tehničnem stanju. Običajni znaki uporabe na ohišju, brez mehanskih poškodb. Naprava se vklopi in preide v delovni način – prikazano na slikah. Idealno za: Psdpfx Asxy S I Rogxjgk • Zdravstvene ustanove • Reševalne službe • Medicinsko varovanje dogodkov • Medicinsko izobraževalno uporabo Možen ogled in testiranje na lokaciji. Pošiljanje preko kurirske službe ali osebni prevzem.

Stanje: zelo dobro (rabljeno), Naprodaj profesionalni vijačni kompresor priznane nemške znamke BLITZ Model Monsun Pro Eco 15 – industrijska naprava, zelo kakovostna izdelava, tiho delovanje, visoka zmogljivost. Idealno za delavnice, proizvodnjo, ličarske delavnice in povsod tam, kjer je potrebna stalna in stabilna dobava stisnjenega zraka. ⸻ TEHNIČNI PODATKI: • Proizvajalec: Blitz • Model: Monsun Pro Eco 15 • Moč motorja: 15 kW • Delovni tlak: 10 bar • Zmogljivost: pribl. 2,0 m3/min • Obrati: 1500 / 3000 obr/min • Leto izdelave: 2011 • Napajanje: 400V (3 faze) ⸻ DELOVNE URE: • pribl. 17.954 h ⸻ OPREMA: - kontrolna plošča - zvočno izolirano ohišje - inštalacija pripravljena za priklop - kompaktna zasnova ⸻ TEHNIČNO STANJE: • kompresor deluje • običajni znaki uporabe Pgjdpfx Aey A Tp Rsgxek • deluje brezhibno ⸻ UPORABA: • avtoservisi • industrija • proizvodnja • ličarske delavnice • servisna podjetja

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Koda Ferwood: AGG0213 - Koda proizvajalca: 1-056-09-3351 - Stanje: Rabljeno - Funkcionalnost: Ni preizkušeno - Združljiv stroj: - Teža: 8 kg - Dimenzije: 46x39x27 cm - V primeru interesa nudimo storitev pregleda, kontaktirajte nas. Pjdpfx Agjyztt Hjxogk

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Koda Ferwood: AGG0213 - Koda proizvajalca: 2-056-10-0220 - Stanje: Rabljeno - Funkcionalnost: Ni preizkušeno - Kompatibilni stroji: - Teža: 6 kg - Dimenzije: 36x26x21 cm - Če ste zainteresirani, nudimo storitev pregleda, kontaktirajte nas. Pgedpfx Agsyztr Aoxok

Stanje: dober (rabljeno), Leto izdelave: 2003, številka stroja/vozila: 0-201-22-4227, Funkcionalnost: omejena funkcionalnost, dolžina obdelovanca (maks.): 4.800 mm, višina obdelovanca (maks.): 80 mm, število mest v zalogovniku orodij: 18, moč vretenovega motorja: 7.500 W, število vreten: 2, hitri pomik na osi Z: 30 m/min, hitro pomikanje X-os: 80 m/min, hitri pomik os Y: 80 m/min, največja hitrost vretena: 18.000 obr/min, hitrost vretena (min.): 18.000 obr/min, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Glavna vretena je opremljena z osjo C in razširitvijo za agregat Flex 5 Območje obdelave X: 4800 mm Območje obdelave Y: 1300 mm Območje obdelave Z: 80 mm 8 konzol 1 vakuumska črpalka 18-pozicijski premični menjalec orodja Pgodpfx Agjxdxa Iexek Nosilec orodij HSK 63 Horizontalna adapter vrtalna glava s 4 fiksnimi vreteni Vrtalna glava s 17 vreteni Dodatno vreteno s vpenjalnim nastavkom Merilna sonda Centralno avtomatsko oljno mazanje Dvižne tirnice za konzolno mizo

Stanje: dober (rabljeno), Leto izdelave: 2015, številka stroja/vozila: 0-200-24-0779, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 55 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, višina obdelovanca (maks.): 60 mm, največja debelina roba: 20 mm, skupna dolžina: 10.825 mm, Used single-sided HOMAG edge banding machine for straight edges; suitable for joint trimming, edging, and post-processing of various edge materials. Fixed fence on the left. Year of manufacture 2015. SPECIFICATION / EQUIPMENT: Base machine with 80 mm wide transport chain as workpiece feed unit, - Maximum workpiece thickness 60 mm - Motorized height adjustment of upper pressure unit - Workpiece support with roller rails - Glue pot lift for feed stop - Glue roller clamping in front of trailing edge of the workpiece - (Remote) manual operation for easy machine setup - Adjustable infeed fence via NC axis - Joint trimming unit with 2x4kW (clockwise/counterclockwise), operation-controlled Horizontal positioning via NC motor (CAN bus) GLUING SECTION A20, comprising: - QA60 glue application unit with PTFE (Teflon) coating - Pre-melter for EVA glue - Suitable for both EVA and PUR adhesives - Edge magazine, min. 0.4 mm to max. 20 mm edge thickness - Pressure zone with automatic horizontal adjustment (NC) for edge thickness, 1 powered, 4 non-powered pressure rollers POST-PROCESSING SECTION: - PK25 end trimming unit, horizontal, 2 motors at 0.8 kW each (front/rear edge), for chamfering/straight cuts and excess trimming - Pre-/flush trimming unit 1.15 kW, top/bottom - FK11 corner rounding unit, 2 motors (top/bottom) with motorized fine adjustment, controlled from operating panel, equipped with various interchangeable heads with tools - Universal milling unit 3.5 kW, controlled - Multi-profile scraper, top/bottom - Flat scraper, top/bottom Pgsdpfxjy A I Sgo Agxek - Buffing unit, top/bottom CONTROL: PC 23 powerTouch - woodCommander 5

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Gantry-Type Portal Milling Machine / Manufacturer: WALDRICH SIEGEN / Model: PF-S-150 - 1953: Original year of manufacture (initially a planing machine) Pgjdpjyz Ru Ujfx Agxok - 1974: Retrofitted by the manufacturer WALDRICH SIEGEN to a portal milling machine (brand new milling head) - 2001: Upgraded to CNC technology, with new control system - 2015: Table drive converted to NC - 2024: Gantry drive conversion Processing Capabilities: - Milling/Drilling: both horizontal and vertical The machine can be inspected under power by appointment. Condition: Operational / Ready for use. TECHNICAL DATA / DESCRIPTION: Axis Travel (CNC feed axes): - Table: 14,000 mm - Crossbeam slide: 4,500 mm - Crossbeam: 4,000 mm - Upright clearance: Width 4,545 mm - Clear opening: 4,200 mm - Height from table to spindle: 4,000 mm - Quill stroke: 450 mm - Table dimensions / Clamping surface: 14,000 x 4,350 mm - Table load capacity: max. 200 t (10 t point load) - Main spindle motor power: 125 kW - Total machine weight: approx. 350 t - Overall footprint: Length 40 m / Width 10 m / Height above floor 9 m EQUIPMENT / ACCESSORIES: - CNC control: SINUMERIK 840D - Documentation - Further extensive equipment ... No guarantee for completeness or accuracy of the technical details or equipment. Subject to prior sale.

Stanje: rabljeno, Leto izdelave: 2018, obratovalne ure: 7.610 h, skupna višina: 1.650 mm, skupna dolžina: 4.400 mm, skupna širina: 1.000 mm, Colour: Grey Weight: 2,500 kg Price: On request - Special features: - Description: The machine currently has an error that needs to be rectified - Year of manufacture: 2018 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: - Operating hours: 7,610 - Number of units: 9 - 1st unit type: Pre-milling unit - Tools included: Yes - 2nd unit type: Glue application unit - 3rd unit type: Pressure roller unit - Tools included: Yes - 4th unit type: End trimming unit - Tools included: Yes - 5th unit type: Rough trimming unit - Tools included: Yes - 6th unit type: Radius scraper unit - Tools included: Yes - 7th unit type: Corner rounding unit - Tools included: Yes - 8th unit type: Flat scraper unit - Tools included: Yes - 9th unit type: Brushing unit - Tools included: Yes - Voltage [V]: 400 - Power consumption [A]: 10.3 - Fuse [A]: 16 - Transport dimensions: 4,400 mm x 1,000 mm x 1,650 mm (L x W x H) - Transport weight [kg]: 2,500 kg - Number of transport packages: 1 Financial Information VAT: The stated price is exclusive of VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector Podoy Ewv Tjpfx Agxogk Yorick Diebels

Stanje: rabljeno, Leto izdelave: 2021, vhodna napetost: 400 V, vhodni tok: 17 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, Ponujamo to rabljeno robno lepilko HOMAG EDGETEQ S-240, leto izdelave 2021. Priložen je dvovrečni odsesovalec ostružkov KOGI 2,2 kW / 1650 Pa. Stroj ima dodaten rezervoar za lepilo. V priloženem PDF-ju je cenitveno poročilo. Tip: EDGETEQ S-240 PROFI KDF 230 Številka stroja: 0-261-73-7111 Leto izdelave: 2021 Shema ožičenja: 0-261-73-7111 Napetost napajanja: 400Y/230 V Število faz: 3 Frekvenca: 50 Hz Maksimalni tok pri polni obremenitvi: 17,3 A Varnilka: 20 A Kratkostični tok: 5 kA Pjdpfx Ajy Exwfogxogk Krmilna napetost: 24 V Zaščita ohišja: NEMA 1 Največji motor: 4,6 A Največji tok grelca: 2,3 A Za dodatna vprašanja ali informacije nas kontaktirajte po sporočilu ali telefonu.

Stanje: rabljeno, Leto izdelave: 2021, vhodna frekvenca: 50 Hz, vhodni tok: 21 A, Ponujamo to rabljeno pretočno vrtalno napravo HOMAG DRILLTEQ V-200, letnik 2021. Stroj je imel redne servise pri HOMAG-u. V kompletu je izsesovalna naprava KOGI 2,2 kW/1650 Pa – dvovrečna + razno orodje. Podpfoy Extmox Agxsgk Tip: DRILLTEQ V-200 OPTIMAT BHX050 Serijska številka: 0-250-73-6562 Leto izdelave: 2021 Napajanje: 400Y/230 V Število faz: 3 Frekvenca: 50 Hz Nazivni tok pri polni obremenitvi: 21 A Varovalka: 25 A Krmilna napetost: 24 V Za vprašanja ali več informacij nas kontaktirajte preko sporočila ali po telefonu.

Stanje: dober (rabljeno), Leto izdelave: 2014, številka stroja/vozila: 0-200-01-2196, Funkcionalnost: popolnoma funkcionalen, vhodni tok: 63 A, vrsta nastavitve višine: električni, hitrost pomika os X: 25 m/min, vrsta aktuacije: električni, skupna višina: 2.000 mm, skupna dolžina: 7.850 mm, skupna širina: 2.300 mm, skupna masa: 5.000 kg, Oprema: CE označba, dokumentacija / priročnik, Stroj za lepljenje robov, v dobrem delovnem stanju, popolnoma električne nastavitve, delovna hitrost 25 m/min, na voljo takoj. Pedpey Ebl Sefx Agxogk

Stanje: zelo dobro (rabljeno), 3-osni (X-Y-Z) CNC OBDELOVALNI CENTER Premična plošča (obdelovanec), premični delovni glavi Vertikalna plošča (obdelovanec) Krmiljenje POWERCONTROL + POWERTOUCH Programska oprema woodWOP Pgjdjyywcvepfx Agxok Varnostna kabina delovne glave Št. 1 blokada za vpenjalne čeljusti obdelovanca na delovnem področju Pogon obdelovanca s transportno verigo Minimalne dimenzije obdelovanca (X-Y-Z) mm 200 x 70 x 12 Maksimalne dimenzije obdelovanca (X-Y-Z) mm 3050 x 850 x 60 Skupna priključna moč (kW) 11,5 (pribl.) DELOVNE SKUPINE: Št. 1 vrtalnih agregatov (moč (kW) 2,3) z vertikalnimi vreteni: - Št. 13 neodvisnih vertikalnih vrtalnih vreten (V13 High Speed) - Št. 6 neodvisnih horizontalnih vrtalnih vreten (4 v osi X + 2 v osi Y) Št. 1 rezkalna žaga za utore (za obdelave v X-osi); premer (mm) 100 Št. 1 vertikalno glavno vreteno (rezkalni agregat) HKS63 (moč kW 5) Avtomatski sistem menjave orodij – število mest v magazinu (št. 4 mest za orodja)

Stanje: zelo dobro (rabljeno), 3-axis (X-Y-Z) CNC-controlled 'FLEXIBLE' MACHINING CENTER Psdoyyvttepfx Agxjgk Moving table (workpiece), static working head – horizontal table (workpiece). Control system: PowerControl PC86 powerTouch (woodWOP software). Safety enclosure for the working head. No. 2 workpiece clamps for access to the working area. WEEKE pre-positioning unit for quick positioning of workpieces in the machine with clamping jaws. Support table (workpiece support) at infeed; outfeed table (with powered belt). With automatic panel pusher. Min. workpiece dimensions (X-Y-Z) mm: 200 x 70 x 8 (2 x 4 mm). Max. workpiece dimensions (X-Y-Z) mm: 3000 x 1000 (optional 1300) x 80 (2 x 40 mm). Simultaneous processing of up to 2 workpieces (on the Z-axis). Separate switch cabinet and operator console. WORKING UNITS (TOP): 2V42, 2H8X/2Y, N2 X-Y90, F2-ETP-6 KW No. 42 independent vertical drilling spindles (drilling head power 2.3 kW). No. 10 independent horizontal drilling spindles (8 in X + 2 in Y). No. 1 grooving saw unit (swivels 90° in X-Y direction), blade diameter 125 mm. No. 1 vertical main spindle (milling unit) ETP (vertical main spindle power 6 kW). WORKING UNITS (BOTTOM): 2V42, 2H8X/2Y, N2 X-Y90, F2-ETP-6 KW No. 42 independent vertical drilling spindles (drilling head power 2.3 kW). No. 10 independent horizontal drilling spindles (8 in X + 2 in Y). No. 1 grooving saw unit (swivels 90° in X-Y direction), blade diameter 125 mm. No. 1 vertical main spindle (milling unit) ETP (vertical main spindle power 6 kW).

Stanje: zelo dobro (rabljeno), ENOSTRANSKA ROBNA LEPILKA (Leva) Debelina roba na kolutu (min/max) mm 0,3 / 3 Debelina roba v letvicah / trakcih (min/max) mm 0,4 / 20 Debelina plošče (min/max) mm 8 / 60 NOV (v 2024) krmilni sistem Numerical Control EDGETEQ MOD - Power Touch (WoodCommander) Podajalna hitrost do 25 m/min Uvajalni sistem EZ 14 Razpršilna enota (za tekoči premaz proti sprijemanju) Nastavljivo vodilno letev upravljano s CNC Enota za obrezovanje 2 x Kw 3 Lepilna enota (P.U.R. lepilo + predtalilnik) Cona za pritisk roba (CNC upravljanje) Magazin za robove v kolutih (predal št. 2) Kapa agregat HL 84 (2 x Kw 0,5 približno) Pnevmatsko nihanje in nastavitev Predrezalna enota BF 20 (2 x Kw 1,5 približno) Multifunkcijska enota (radiusno in oblikovno rezkanje) FK 11 (2 x Kw 0,4 približno) Profilni potezni noži Finish enota (ravni potezni noži + polirna enota) FA 11 Pedpfxjyyvp Uo Agxogk 203019) Št. 1 sistem za vračanje "LIGMATECH" Mod. ZHR 541/L/095 (s portalskim mostom in 360° vrtljivo sesalno glavo)

Stanje: zelo dobro (rabljeno), Power Control control system – CadMAtic 4 Professional software Roller conveyors for feeding the lifting table (mm 32,000) Lifting table (mm) 5,600 x 2,200 VAC infeed cart for gentle loading of sensitive single panels via vacuum 1st pusher saw with no. 6 collets Turning device (for panels) up to 90° 1st panel dividing saw, max. cutting width (mm) 5,600 (cutting line with air cushion) Max. saw blade protrusion (mm) 190 Scoring saw (max. saw diameter / power) mm 200 (kW 2.2) Main saw (max. saw diameter / power) mm 600 (kW 36) Adjustable saw carriage feed (QS) (m/min) 1–130 2nd pusher saw no. 14 with collets 2nd panel dividing saw, max. cutting width (mm) 2,200 (cutting line with air cushion) Max. saw blade protrusion (mm) 190 Scoring saw (max. saw diameter / power) mm 200 (kW 2.2) Main saw (max. saw diameter / power) mm 600 (kW 36) Podevnq H Eopfx Agxsgk Adjustable saw carriage feed (QS) (m/min) 1–130 Shaker trough, chip removal conveyor belt with cross-cutting unit (kW 19.5) No. 2 front air-cushion tables (+ 1 additional and more) (mm 800 x 2,160) Rollers in flocked design for highly sensitive materials Automatic stacking (No. 2 transfer tables: No. 2 x Liftomat HAU-A 25/12) Automatic stacking system with 8 stations

Stanje: rabljeno, številka stroja/vozila: 006622, Max. panel width: 2100 mm Psdsu T Tt Topfx Agxsgk Max. panel length: 2850 mm Max. panel stack height above floor: 2100 mm Lifting capacity: 250 kg Movement system: with suction elements

Stanje: rabljeno, številka stroja/vozila: 005521, Working area X-axis: 4000 mm Working area Y-axis: 1400 mm Working table: With vacuum console supports Main spindle power: 15 kW Number of controlled axes: 4 axes Number of drilling spindles: 30 Number of tool positions: 24 Pjdsvctlgopfx Agxogk

Stanje: rabljeno, Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0/200/06/3164, skupna masa: 6.500 kg, skupna dolžina: 12.600 mm, teža obdelovanca (maks.): 5.500 kg, Stroj za mehko oblikovanje robnega traku, v obratovanju, rabljeno stanje, leto izdelave 2003, Podpfx Agovx Ep Nexogk

Stanje: novo, Leto izdelave: 2026, Engine power: 9.5 kW Splitting force: 20 tonnes Voltage: 400 V / 50 Hz Working pressure: 16–20 MPa Cylinder: Ø 101.6 x 610 mm Maximum log diameter: 480 mm Maximum log length: 610 mm Cycle time: 6–8 s Return time: 3 s Splitting wedge: 6-way Oregon guide bar: 22" Chain: 74 links, 0.375" Saw/splitting drive: Hydraulic motor/gear pump Discharge length: 3.2 m Conveyor belt (discharge belt): 6800 x 250 x 4 mm Pgedsyx D E Ispfx Agxok Tyres: 13" Shipping dimensions (W x L x H): 2250 x 1000 x 1200 mm Weight: 820 kg Features: 20 tonne splitting force – effective splitting of larger logs. Electric drive – economical, quiet and clean operation with no emissions. Hydraulic feed and pressure regulation – stable log guidance and increased operator safety. Adjustable discharge angle – directional control of biomass discharge. Hydraulic guide and height adjustment – convenient positioning of work material. Cutting and splitting function – one tool for two essential wood processing operations. Robust construction – durable and stable frame for intensive use. Ergonomics and working comfort – intuitive operation and comfortable settings enhance productivity. Versatile application – suitable for agriculture, workshops, and firewood processing. Wedge blade, 8-piece – Price €130 (additional charge). Wedge blade, 4-piece – Price €100 (additional charge). Hydraulic table for firewood processing machines – Price €1,150 (additional charge).

Stanje: novo, Leto izdelave: 2026, Engine power: 21 HP Splitting force: 20 tonnes LONCIN engine Operating pressure: 16–20 MPa Cylinder: Ø 101.6 x 610 mm Maximum log diameter: 480 mm Maximum log length: 610 mm Cycle time: 6–8 s Return time: 3 s Splitting wedge: 6 arms OREGON guide bar: 56 cm (22 inches) Chain: 74 links, 19 mm (0.75 inches) Saw/splitter drive: Hydraulic motor/gear pump Conveyor belt: 6800 x 250 x 4 mm Pgjdpfx Agjyx D Dwoxsk Tyres: 33 cm (13 inches) Shipping dimensions (W x L x H): 2250 x 1000 x 1200 mm Total weight: 790 kg 20-ton splitting force – efficient operation even with larger logs. Combustion engine – independence. Suitable for mains and field operation. Hydraulic feed and pressure regulation – stable material guidance and increased safety. Discharge angle adjustment – precise control of material ejection. Hydraulic guide and lifting adjustment – convenient positioning for work tasks. Cutting and splitting function – one machine for two essential steps in wood processing. Robust construction – durable frame for intensive use. Ergonomic operation – intuitive controls and high operator comfort. Versatile use – suitable for field operations, firewood processing, and heavy-duty tasks. Wedge blade, 8-piece – Price €130 (extra charge). Wedge blade, 4-piece – Price €100 (extra charge). Hydraulic wood feeder for firewood processing machines – Price €1,150 (extra charge).

Stanje: novo, Leto izdelave: 2026, Edge thickness: 0.4 - 3 mm Thickness of glued panels: 10 - 45 mm Minimum length of glued boards: 80 mm Minimum width of glued panels: 60 mm Mechanical feed speed: 8 / 11 / 13 m/min Adhesive temperature: 185 - 210 ℃ Tank capacity: 2.5 - 3 kg Primary milling spindle speed: 12,000 rpm Rounding radius: R = 2 mm Working pressure (compressed air): 6 - 8 bar Pre-milling unit: 1.8 kW x 2 Glue application roller unit: 0.75 kW Glue heating device: 1.5 kW Grooving (notching) unit: 0.37 x 2 kW Main milling unit: 0.75 kW x 2 Corner rounding unit: 0.75 kW Conveyor belt unit: 1.5 kW Overall dimensions: 4,500 x 700 x 1,450 mm Pedpfx Agov Dt T Hexogk Transport dimensions: 4,280 x 650 x 1,280 mm Weight: 1,230 kg Pre-milling: Diamond cutters Gluing Final trimming Milling: two motors Corner processing Radius scraper Flat scraper (self-adhesive) Spray system Polishing Interior lighting Automatic lubrication Electrical components: Delta brand

Stanje: novo, Leto izdelave: 2026, Height of processed elements: 8-45 mm (optional: veneer up to 60 mm) Minimum workpiece length: 100 mm Minimum workpiece width: 100 mm Edge thickness: 0.4-3.0 mm Feed speed: 9.5 m/min Cutting unit - motor power: 1 x 0.27 kW Pedpfx Aov Duvvsgxogk Milling aggregate: 2 x 0.35 kW Milling unit: 12,000 rpm Corner milling aggregate - minimum length of processed elements: 250 mm Corner milling aggregate - motor power for minimum length of elements: 1 x 0.35 kW Corner sanding aggregate: 12,000 rpm Jointing and trimming aggregate: 1 x 1.1; 1 x 0.75 kW Pre-milling aggregate: 12,000 rpm Edge cutting unit: Glue removal unit: Polishing unit - motor power: 2 x 0.18 kW Polishing unit: 2,800 rpm Outfeed support with rollers: Exhaust pipe diameter: 120 mm Compressed air: 6.5 bar Total power: 6.7 kW Dimensions (L x W x H): 4200 x 800 x 1500 mm Weight: 1,180 kg + EUR 2,000 for the option with PUR glue tank