Hinst Pretočna Čistilna Naprava Za Dele nakup rabljenega (85.767)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Safety tester with scanner for high voltage test station - EATON Sefelec 506-S - EATON Sefelec 64-SC The devices were purchased in 2023/2024 and are in excellent condition. The SEFELEC 506-S test device for electrical safety testing, a new generation EATON model, is based on ARM Dual Core technology components and controlled by a DSP. This technology provides the operator with optimal stability and repeatability of measurements. The high accuracy and test speed are tailored to the quality assurance requirements in production and incoming goods inspection. The sequencing function simplifies operation of the SEFELEC 506-S test station when integrated into a test setup or test bench. The 7” touchscreen of the new SEFELEC model series impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 Lrjdpfxexqxw Te Ah Ujl - Automatic selection of measurement sequence - Sequence mode for combining multiple consecutive tests Withstand voltage at 5 kVAC 500 VA and 6 kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2 TΩ range PE measurement at 32 A – 8 VAC, measurement 0 ... 1 Ω Optional: Test current 50 A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7”, 16 million colors, for programming as well as displaying active tests and results Integrated ARM Dual Core Control & Nand 3D technology for optimum precision, stability, and repeatability Integrated DSP enables higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-034: Particular requirements for measuring insulation resistance and for test equipment for dielectric strength) Shipping is possible upon prior arrangement. #8312-2

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Safety tester for high voltage test bench - EATON Sefelec 506-S The device was acquired in 2023 and is in TOP condition. The SEFELEC 506-S electrical safety tester, a new generation EATON model, is based on ARM dual-core component technology and controlled by DSP. This technology offers the operator optimal stability and repeatability of measurements. High measurement accuracy and speed are tailored to the requirements of quality assurance in production and incoming goods inspection. The sequencer function simplifies station operation when integrating the SEFELEC 506-S into a test rig or test bench. The new SEFELEC series’ 7” touchscreen impresses with simple and intuitive operation. Lrsdpfx Ahsxqxt Ie Ujl - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of measurement sequence - Sequence mode for combining multiple consecutive tests Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuation (ΔI) Burn mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2TΩ range PE (protective earth) test at 32A–8VAC, measurement 0 ... 1Ω Optional: test current 50A Programmable test ramps Ramp-up, hold, ramp-down Multi-ramp mode, up to 7 steps TFT touchscreen 7”, 16 million colors, for programming and displaying ongoing tests and results Integrated ARM dual-core control & NAND 3D technology for optimum accuracy, stability, and repeatability Integrated DSP allows for higher test speeds Large internal memory for storage of configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical measurement, control and laboratory equipment – Part 2-034: Particular requirements for measurement equipment for insulation resistance and withstand voltage) Shipping available by arrangement. #8312-1

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Na voljo je stroj za polnjenje in zapiranje velikih pločevink JBT FoodTech iz živilske industrije. Teža pločevinke: 750g/1000g, vsebina: sladkano kondenzirano mleko, največja zmogljivost: 600 pločevink/min, polnilne glave: 22, zapiralne glave: 5, izvedba: monoblok, upravljanje: Siemens. Dokumentacija je na voljo. Možen ogled na lokaciji. Lredpoy N Uv Ssfx Ah Uol

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nefunkcionalno, Industrijski CO₂ ploščni laserski resonator Rofin DC 025 Proizvajalec: Rofin Tip: DC 025 Obratovalna moč: neznana Nazivna moč: 2500 W Območje moči: pribl. 250 – 2500 W Tip laserja: CO₂ plošča (difuzijsko hlajen) Lsdpfxjy Dubde Ah Uorl Vzbujevalni način: visoka frekvenca (HF) Način delovanja: neprekinjen (CW) + pulzni način Parametri žarka Valovna dolžina: 10,6 µm Premer žarka: < 25 mm Kakovost žarka (K-faktor): > 0,8 Divergenca: < 0,5 mrad Stabilnost: ±2 % (v 24 urah) Dimenzije (D × Š × V): pribl. 1700 × 800 × 850 mm Teža: pribl. 500 kg

Stanje: dober (rabljeno), Leto izdelave: 1994, številka stroja/vozila: 4422550994025, Ponudba 26088 Hidravlične škarje za profile in palice z izsekovalno napravo ter prebijalnim strojem Tehnični podatki: - Škarje za ploščato železo - Ploščato železo: 400 x 16 mm - ali: 300 x 18 mm - Škarje za profile - L- in T-profil pri 90°: 130 x 12 mm - Kvadratno / okroglo železo: 40 / 40 mm - Izsekovalna naprava - s kvadratnim izsekovalcem za pločevine do pribl.: 13 mm - Globina izseka pribl.: 70 mm - Širina izseka pribl.: 52 mm - Prebijalni stroj - Prebijalna sila pribl.: 60 t - Razdalja do hrdla: 400 mm - Hod pribl.: 10 do 50 mm - Prebija v jeklo do: Ø 31 pri 15 mm - Električni kontaktni omejevalnik - Različne prebijalne utore in matrice Lsdpfx Aoy Nk Rloh Uorl - Pogon: 400 V / 5,5 kW - Potrebna postavitvena površina: Š 1100 x V 2000 x G 1700 mm - Teža pribl.: 2100 kg

Stanje: zelo dobro (rabljeno), LDS / CTS Vibration Test System Model: V895-440 HBT SP + CTS CV-70/1700-10 Manufacturer: Ling Dynamic Systems (LDS) / CTS For sale is a complete electrodynamic vibration testing system, consisting of LDS shaker, SPA56K power amplifier, K2+ control system, and CTS climate chamber. Ideal for combined vibration and climate testing in industry, automotive, aerospace, as well as research and development. Shaker / Vibrator Manufacturer: Ling Dynamic Systems Ltd. (UK) Model: V895-440 HBT SP Air-cooled vibrator Armature diameter: 440 mm Frequency range: DC – 2100 Hz Sine force: 55.6 kN Shock force: 166.8 kN Max. acceleration: 981 m/s² Max. velocity: 1.6 m/s Displacement: 63.5 mm pk-pk Payload: approx. 700 kg Air-suspended and vibration-isolated system. Compressed air supply required. Power Amplifier Manufacturer: LDS Model: SPA56K v3 V890/5 Class-D high-power switching amplifier Industrial air-cooled version Supply voltage: 415 V Max. power consumption: 86.9 kVA Efficiency: > 90% Controller display: Amplifier: SPA8/16K_v3 Vibrator: V830_185 Control System IMV K2+ Vibration Control System Multi-channel control system incl. Dell Precision PC system, monitor, keyboard, and mouse CTS Climate Chamber Manufacturer: CTS Clima Temperatur Systeme Model: CV-70/1700-10 Year of manufacture: 03/2020 Temperature range: -70 °C to +180 °C Humidity range: 10% to 95% r.h. Volume: approx. 1700 liters Nominal voltage: 400 V / 3/N / 50 Hz Power: 21.9 kW Nominal current: 37.1 A Refrigerants: R452A: 9.5 kg R23: 3.7 kg Equipment Combined climate and vibration testing Slip table / mounting table included Vibration-isolated installation Programmable operation possible Slip table 760 mm x 850 mm Threaded insert spacing 100 mm Activated licenses: Excitation types: Sine, Resonance Dwell, Limit Control, Amplitude Dwell Multi Sweep Sine, Noise Soft-Clipping, Sine-on-Random PSD Limit Control, Shock Extensions: Lsdpfx Ajy Iwp Seh Uerl Scheduler, Multi-Language, Launcher, System Monitor Weight Shaker: approx. 3.0 – 3.2 t Total weight: approx. 6,000 – 7,000 kg Condition Used system System was last in operation System powers up / control is active Inspection under power possible Scope of delivery LDS V895-440 HBT SP shaker LDS SPA56K amplifier IMV K2+ system Complete PC system CTS climate chamber Accessories as per pictures Loading possible. Sale without warranty. Subject to prior sale and changes.

Stanje: pripravljen za uporabo (rabljen), ASYST CNC-naprava za profiliranje in ravnanje Tip: APNC 400 Leto izdelave: 2003 Lsdpfoy Edc Tex Ah Ujrl Naprava je funkcionalna; kot rezervna ali za nadomestne dele

Stanje: zelo dobro (rabljeno), Ponujamo vam: Orodje za vtiskovanje za ustvarjanje oblikovne zveze Proizvajalec: HWR Tip: SOLIDStamp Lodpfx Ahsw Ra Hqj Uerl Prikazani dodatki, orodja in vpenjalna sredstva so vključeni v obseg dobave le, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter vmesne prodaje!

Stanje: novo, Leto izdelave: 2026, Ultrazvočna pralna naprava – ultrazvočni čistilni stroj kupljeno iz stečajne mase – novo naprava, neuporabljena! Proizvajalec: Derui Ultrasonic Naprava v celoti izdelana iz nerjavečega jekla - Spodnji ultrazvok, multifrekvenčni: 25/45 kHz preklopno, moč (efektivna/vršna): 1.600/3.200 W - Ogrevanje nastavljivo do 80°C; moč: 2.500 W - Dimenzije košare: D x Š x V 530 x 400 x 300h mm - Dimenzije posode: D x Š x V 550 x 420 x 320h mm - Zunanje dimenzije: D x Š x V 650 x 560 x 830h mm - Teža naprave (prazna): 115 kg Lredpfx Ahoyz N Exj Uol - Naprava je premična na kolesih - vključno z izoliranim pokrovom - vključno z 1 kosom košare iz nerjavečega jekla Brez jamstva, ker je kupljeno iz stečajne mase.

Stanje: novo, Leto izdelave: 2026, Ultrazvočna pralna naprava – Ultrazvočni čistilni stroj kupljen iz stečajne mase – nov, neuporabljen stroj! Proizvajalec Derui Ultrasonic Stroj v celoti izdelan iz nerjavečega jekla Lsdpfoyz Nu Tox Ah Uorl - Talni ultrazvok, večfrekvenčni: preklopno 25/45 kHz, moč (efektivna/vršna): 1.000/2.000 W - Ogrevanje nastavljivo do 80°C; moč: 1.500 W - Mere košare: D x Š x V 400 x 350 x 280 mm - Mere bazena: D x Š x V 420 x 370 x 300 mm - Zunanje mere: D x Š x V 520 x 510 x 810 mm - Teža stroja (prazno) 85 kg - Stroj je premičen na kolesih - vključuje izoliran pokrov - vključuje 1 kos košare iz nerjavečega jekla Brez garancije, ker je kupljeno iz stečajne mase

Leto izdelave: 2015, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Naprava za rezanje profilnih tirnic ALFRA PSG 5+ je letnik 2015 in ima hidravlični nastavek. S pomočjo dolžinskega omejevalnika je mogoče profile natančno in ponovljivo rezati na želeno dolžino. Na hidravlični nastavek je priključena elektrohidravlična črpalka ALFRA 120, ki je del ponudbe. Del kompleta je tudi delovna miza. Naprava je bila preverjena glede delovanja in ima opravljen elektro pregled, ki ga je izvedlo specializirano elektro podjetje. Lredpfxeyyxp Ro Ah Ujl

Stanje: rabljeno, prevoženi kilometri: 1 km, moč: 242 kW (329,03 KM), konfiguracija osi: 4x4, vrsta prenosa: samodejen, Leto izdelave: 2012, Gross vehicle weight (GVW): 24,000 kg For further information, please contact Emal Jaweed. Atlas Copco SmartRoc C50-10SF, Year of construction: 2012, Operating hours: 14,261, Power (kW / hp): 242 / 329, Weight: 30,000 kg, Borehole diameter: 90–140 mm, Maximum drilling depth: 36 m, Air volume (FAD) at 12 bar: 223 l/s (approx. 472 cfm), Drilling method: COPROD technology combines top hammer drilling, Drill meter-controlled automation system, GPS/Hole Navigation System (HNS) for guided drilling, Dust collector, Automatic rod changer, Good condition, Air conditioning, Auxiliary heater, Central lubrication, Radio, Video available Miscellaneous: * We offer over 200 units for sale. * Our location is 30 km north of Frankfurt/Main Airport. * Financing & leasing options available. Ljdpfjy Ivypsx Ah Uorl * We are specialists in worldwide transport & shipping. * No liability for typographical or printing errors. * Subject to prior sale and errors. * Trade-in possible! * For vehicle and used machinery sales, only the general terms and conditions (GTC) of Jaweed GmbH apply. * Further information and our full terms and conditions are available on our website.

Stanje: skoraj kot novo (rabljeno), Große Traysealer direkt aus einem britischen Fleischbetrieb, in dem sie für das Verpacken von Hackfleisch in MAP-Schalen eingesetzt wurden. Wir haben zwei baugleiche Maschinen verfügbar. Lrodpfjilfkrox Ah Uol

Stanje: novo, Leto izdelave: 2025, Advantages of pre-glued dowels: • No additional glue required when shooting in the dowel • No cleaning effort for the water supply system Lredpjwu Dnnefx Ah Uel Advantages of the DübelJet: • Recoil-free gun • Easy handling • Mobile handheld device • Universal application range Technical data for the DübelJet: • Doweling system and water supply system designed for pre-glued dowels • Dowel diameter: 8 mm • Dowel length: 35 mm (default setting, adjustable from 30 to 40 mm) • Dowel projection: 12 mm (default setting, adjustable from 7 to 20 mm) • Universal application range • Shooting in pre-glued dowels (with water) especially in furniture production • Shooting in position dowels (without water) made from wood or plastic, for example in frame construction or in conjunction with screws or carcass connectors

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, vhodna frekvenca: 50 Hz, delovna širina: 1.200 mm, Throughfeed CNC Dowel Drilling & Insertion Machine LAZZONI Group Next 2+3K for Sale – designed for high-efficiency, series production of furniture components. The machine features automatic infeed and outfeed systems, enabling single-operator use and significantly reducing production costs. Key Information: Manufacturer: Lazzoni Group Model: Next 2+3K Year of manufacture: 2018 Control: PLC + operator panel (HMI) Functions: drilling + automatic dowel insertion Working width: 230-1200 mm Working height: 10-22 mm Working thickness: 40-260 mm Power supply: 400 V / 50 Hz Installed power: 9.1 kW Machine weight: approx. 2,900 kg CE certificate Working configuration: Number of heads: 5 - 2 side heads - 3 top heads Total number of spindles: 35 (7 spindles per head, spindle spacing: 32 mm) Throughfeed operation – ideal for repetitive parts Automation & Ergonomics: - Automatic loading magazine - Automated outfeed magazine (no need for a second operator) - Automatic dowel insertion - Quick setup changes - Stable and repeatable performance in large batches Applications: - Drawer side production - Cabinet furniture components - Fronts, sides, rails Perfect for large factories and smaller businesses focusing on automation. The machine is fully operational, previously used in series production, and can be inspected on site. Loading assistance available. Location: Elbląg Lsdpfx Ahsywxy Ro Uerl Net price: 25,000 PLN

Stanje: rabljeno, Leto izdelave: 2002, Ponujamo rabljeno ultrazvočno čistilno napravo Finnsonic MC-360/III, letnik 2002. Če imate vprašanja ali potrebujete več informacij, nam pišite ali nas pokličite. Lodpfjywua Tox Ah Uerl Dimenzije posameznih rezervoarjev so približno širina 750 mm x globina 600 mm x višina 600 mm.

Stanje: rabljeno, Leto izdelave: 1993, Največja debelina pločevine: 3 mm Razdalja med sredinama valjev: 125 mm Iztek maks.: 500 mm Teža ca. 500 kg Debelina materiala pri trdnosti 40 kg/mm²: max. 3 mm Iztek: 500 mm Lrsdpfey Iha Uex Ah Uol Delovna globina: 450 mm Ročno nastavljanje zgornjega valja Razdalja med sredinama valjev: 125 mm Delovna hitrost brezstopenjska: 3–15 m/min Odbijačna pregrada Vključuje 1 par valjev Desni/levi tek preko nožnega stikala

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SN 1171, teža obdelovanca (maks.): 450 kg, delovna višina: 870 mm, hitrost podajanja osi Y: 45 m/min, delovna širina: 300 mm, trajanje garancije: 12 meseci, skupna dolžina: 1.900 mm, vrsta nastavitve višine: mehanski, skupna masa: 450 kg, skupna višina: 1.500 mm, skupna širina: 1.300 mm, priključek za stisnjen zrak: 6 letvica, Oprema: dokumentacija / priročnik, The APACHE 3 is a cost-effective solution designed for both artisanal and industrial use, perfectly suited for coating façade cladding and its substructures. It is ideally and unrestrictedly suited for coating cross-sections of 300 mm x 25 mm and produces flawless surfaces very efficiently and economically—without the operator needing any special prior knowledge. The unit can also be integrated into automated plants or coating lines. It is capable of coating boards, profile boards, tongue-and-groove boards, rhomboid profiles, laminated and structural timber, decking boards, garden, log cabin, sauna, or privacy screens—all products requiring a top-quality visible surface. Their substructures (typically black) are coated using thin, highly pigmented stains with wood protection agents, without the need for side brushes. The APACHE 3 distinguishes itself from standard market products through its robust monoblock welded steel construction and a coating applied with a curing process using highly resistant Teflon (enamel). This non-stick coating ensures a self-cleaning, exceptionally low-maintenance operation. The machine offered is brand new and available for viewing in our showroom. We are happy to demonstrate our machines and systems either at our facility or at a customer's location near you. For more information and detailed description, please visit our SARMAX website. APACHE 3 Serial Number: SN 1171 Flood coating machine with three (3) brushes Working width: 300 mm Working height: 100 mm Lsdpfsxhquxsx Ah Ujrl Minimum workpiece length: 100 cm Feed speed, frequency controlled: 10 - 45 m/min Number of driven transport rollers: 3 Ø of transport rollers: 80 mm Brush arrangement: two (2) from above, one (1) from below Ø of brushes: 160 mm Central brush drive: 2.2 kW Pneumatic blow-out left/right, fan nozzles for blowing out tongue and groove: 80 l/min Double diaphragm pump: 90 l/min Compressed air consumption: 600 l/min Connection: CEE plug 16 A 400/50/3 V/Hz/P E Total power: 4.5 kW Working height: 900 +/- 50 mm Weight approx.: 450 kg Operation: via command and display units in accordance with VDE, hydraulic ball valves Dimensions (L/W/H): 1,900 x 1,300 x 1,500 mm Standard: CE Colour, design: grey RAL 7046

Stanje: zelo dobro (rabljeno), RS-Simulators Thermal Shock Chamber ST2K 1000 / 55 The system was regularly maintained and serviced by the manufacturer until it was decommissioned. Device Data Manufacturer: RS-Simulators Model: ST2K 1000 / 55 Type: Thermal Shock Chamber Cooling: Water-cooled Description Used thermal shock chamber for standard-compliant thermal shock testing. Suitable for material, component, and reliability tests. Usable in industry, automotive, research, and quality assurance applications. System Description - Two separate temperature chambers (hot / cold) - Automatic horizontal test basket transfer - Fast changeover operation for thermal shock tests Temperature Ranges - Hot chamber: +40 °C to +180 °C - Cold chamber: -70 °C to +100 °C - Time deviation: ±0.8 K Test Chamber - Volume: approx. 580 liters - Internal dimensions (W x H x D): approx. 1070 x 680 x 800 mm - Max. load: approx. 150 kg Power Supply - 400 V / 3~ / N / PE / 50 Hz - Power: max. 33 kVA - Current consumption: max. 65 A Media Connections - Cooling water: G 1", approx. 3 bar (max. 10 bar) - Cooling water requirement: max. 3.2 m³/h - Cooling water return: non-pressurized - Compressed air: NW 7.2, 4–10.5 bar Dimensions - External (W x H x D): approx. 2800 x 2400 x 2200 mm Weight - Approx. 2800 kg Equipment - Horizontal basket movement - C-rails in the test chamber - Large test basket (>1000 mm) - Viewing window - Interior lighting - SE-604 controller - Program operation and data logging - RS232 interface Refrigeration System Lodpjy H Igfofx Ah Uerl - Refrigerants: R449A / R23 - R449A: approx. 8.0 kg - R23: approx. 2.5 kg Operating Data - Operating hours: approx. 4,500 h - Sound level: approx. 67 dB(A) Ambient Conditions - Temperature: +12 °C to +30 °C - Humidity: 25% to 75% rH Scope of Delivery - RS-Simulators Thermal Shock Chamber ST2K 1000 / 55 - Scope of delivery as shown Optional Pre-shipment Service - Functional test - Refrigerant service - Leak test - Trial run with protocol Condition Used. Condition as shown in the images. Note Used device, sold without warranty. Inspection by appointment possible. Loading and transport can be arranged upon request. Subject to prior sale and technical changes. If you have any questions, please feel free to contact us.

Stanje: zelo dobro (rabljeno), Širina traku: maks. 1.750 mm Lrjdpfx Ahjy Nyugj Ujl Debelina traku: 0,4 - 3 mm Območje zasuka prečnega reza: +/- 34° Teža koluta: maks. 25 t Zunanji premer koluta: maks. 2.000 mm Premer trna: 508 mm Leto izdelave: 1971/2004/2020/2023

Leto izdelave: 2012, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, BWT Water Treatment Installation consisting of: - Duplex Softener, BWT ELITE PRO 320 DUO (DN65, 17 m³/hr) - Salt Tank BWT SB 45-4 (suitable for max 1500KG salt, 2.18 m³) - Pre-filter BWT GT10 (2" 14 m³/hr) - Reverse Osmosis Filtration BWT PERMAQ Pro 8SX (8,500 litres/hour, frequency-controlled pump, salt retention >97%, energy efficient, compact) Ledpew Aw Nuofx Ah Uorl

Stanje: rabljeno, Leto izdelave: 1909, 3D Systems ProCure 750 Ledpsv Upuujfx Ah Usrl Used for curing 3D-printed parts during the development phase at an automotive manufacturer. All lamps are functioning, and the turntable rotates smoothly.

Leto izdelave: 2012, stanje: pripravljen za uporabo (rabljen), Système de transport pneumatique DAXNER pour café / vrac – complet – Année de construction 2012 Lredpfxoy Rh Rxe Ah Uel À vendre : un système de transport pneumatique haut de gamme, entièrement équipé, du fabricant DAXNER, spécialement conçu pour le transfert en douceur de café et autres matériaux en vrac similaires. Caractéristiques techniques : Fabricant : DAXNER (Autriche) Année de construction : 2012 Capacité de transport : env. 900 kg/h Mode de transport : pneumatique (soufflante à canal latéral) Produit : café / produits en vrac légers Fonctionnement : continu Livraison comprise : Soufflante à canal latéral Cuve de réception / séparateur Vannes et armoire de commande Installation complète et opérationnelle Particularités : Transport très doux (idéal pour les produits sensibles comme le café) Transport faible en poussière / système fermé Construction industrielle robuste Prêt à l'emploi immédiatement État : Occasion, très propre et bien entretenu Installation complète et entièrement fonctionnelle Une visite est possible sur rendez-vous. Informations et photos supplémentaires sur demande.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, Avtomatski, elektronsko nadzorovan stroj za postavljanje zob za gater žage. Tip GSA. V zelo dobrem stanju. Lrsdpfx Ahsy E Nkve Uel

Stanje: rabljeno, popolnoma iz nerjavečega jekla premično kolotek 600 mm brezstopenjska hitrost nastavljiva delovna višina z izpihovalno napravo Lrodpfx Ahey Naw Us Uol zunanje mere (D x Š x V): pribl. 3.400 x 1.300 x 1.900 mm