Hesse By Lfss Dpm 1070-100 nakup rabljenega (34.506)

Stanje: novo, Condition: New Delivery time: approx. 14 - 16 weeks after order Country of origin: Turkey Price: €92,600 Leasing rate: €1,750.14 Pressing force: 160 t Nominal pressing force at 6 mm Table length: 750 mm Table width: 1100 mm Drop-through hole in table: 230 mm Stroke: 1 - 172 mm Strokes per minute: 45 1/min Ram guides: 6 Ram adjustment: 100 mm Pin hole in ram: 80 mm Throat depth: 375 mm Installation height: 540 mm Motor: 11 kW Length: 1,890 mm Width: 1,950 mm Height: 3,650 mm Weight: 15,500 kg Welded steel frame construction 6-way ram guidance Pneumatic clutch-brake combination Safety enclosure with light barrier and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Motorized ram adjustment Variable strokes per minute via frequency inverter Operating modes: • Setup mode • Two-hand operation • Foot operation • 2-cycle operation via light barriers • Continuous operation Touchscreen for: • Stroke counter with preselection for continuous operation • Stroke rate adjustment • Lubrication intervals and runtime Hnsdowiqu Rjpfx Alasl • Alarm messages • Motor rotation direction • Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Equipped in accordance with CE regulations Sample photos, illustration incl. optionally available clamping plate OPTIONS: • Vibration pads €192.00 • Clamping plate on request • Hydraulic overload protection on request etc.

Stanje: novo, Condition new Delivery time approx. 14 - 16 weeks from order Country of origin: Turkey Price: €83,200 Leasing rate: €1,572.48 Press force: 130 t Nominal press force at 4.5 mm Table length: 650 mm Table width: 950 mm Table through-hole: 220 mm Stroke: 1 - 132 mm Strokes per minute: 50 Ram guides: 6 Ram adjustment: 95 mm Ram bore: 70 mm Throat depth: 325 mm Installation height: 500 mm Motor: 11 kW Length: 1,800 mm Width: 1,725 mm Height: 3,020 mm Weight: 8,000 kg Welded steel frame construction 6-fold ram guide Pneumatic clutch-brake combination Safety enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Motorized ram adjustment Variable stroke rate via frequency inverter Operating modes: * Setting mode * Two-hand activation * Foot pedal activation * 2-cycle operation via light barriers Hnjdpfx Aowiqn Relaol * Continuous operation Touchscreen for: * Stroke counter with preselection for continuous operation * Stroke rate adjustment * Lubrication intervals and duration * Alarm messages * Motor rotation direction * Monitoring of inputs and outputs 2 free cams for peripheral device integration Automatic central lubrication Equipped according to CE regulations Sample images, shown with optionally available clamping plate OPTIONS: Vibration pads €192.00 Clamping plate on request Hydraulic overload protection on request etc.

Stanje: novo, Leto izdelave: 2024, Stanje: novo Leto izdelave: 2024 Številka zaloge: 9740 Dobavni rok: takoj, vmesna prodaja mogoča Država porekla: Turčija Cena: 6.200 € Leasing obrok: 119,66 € Na zalogi: 1 Dolžina upogibanja: 1.050 mm Maks. upogibna zmogljivost - konstrukcijsko jeklo: 3 mm Premer zgornjega valja: 90 mm Hitrost valjanja: 6 m/min Moč motorja: 1,1 kW Dolžina: 1.630 mm Širina: 700 mm Višina: 1.200 mm Teža: 480 kg 3 valji Asimetrična postavitev valjev 2 pogonska valja preko zavornega motorja Hnjdpfxswiqnws Alasl Nastavitev zadnjega valja z ročnim kolesom Reže za žico pri spodnjem in zadnjem valju Zgornji valj v odprtini Desni/levi tek z dvojnim pedalom Naprava za stožčasto valjanje Navodila za uporabo v NEMŠČINI

Stanje: novo, Leto izdelave: 2024, Stanje novo Letnik 2024 Številka zaloge 9738 Dobava takoj, prodano vmes Država izvora Turčija Cena 20.300 € Leasing rata 389,76 € Na zalogi 1 Dolžina upogibanja 1530 mm Hsdpfx Alewirulsajnl Maks. kapaciteta upogibanja - konstrukcijsko jeklo 6 mm Maks. debelina pločevine brez predhodnega upogibanja - konstrukcijsko jeklo 6 mm Maks. debelina pločevine s predhodnim upogibanjem - konstrukcijsko jeklo 4 mm Premer zgornjega valja 150 mm Moč motorja 4 kW Dolžina 3100 mm Širina 1120 mm Višina 1020 mm Teža 2100 kg 3 valji Asimetrična postavitev valjev - s pred-upogibanjem 2 gnana valja Motorizirana nastavitev stranskega in vpenjalnega valja Digitalni prikaz položaja stranskega in vpenjalnega valja Zgornji valj z možnostjo odklopa naprej Delovanje naprej/nazaj Kaljeni valji Premični upravljalni pult Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI (Simbolna fotografija)

Stanje: novo, Condition: New Delivery time: approx. 14 - 16 weeks from order Country of origin: Turkey Price: €197,600 Leasing rate: €3,734.64 Pressing force: 400 tons Bending length: 6,050 mm Axes: 3 Stroke: 365 mm Distance between frames: 5,100 mm Throat depth (side frame): 510 mm Installation height: 630 mm Drive system: hydraulic Rapid traverse Y-axis: 120 mm/s Working speed Y-axis: 8 mm/s Return speed Y-axis: 100 mm/s Backgauge stroke X-axis: 750 mm Backgauge speed X-axis: 350 mm/s Backgauge speed R-axis: 300 mm/s Backgauge stroke R-axis: 250 mm Table height: 1,220 mm Table width: 154 mm Oil tank: 500 l Motor power: 37 kW Length: 7,500 mm Width: 2,110 mm Height: 3,810 mm Weight: 34,660 kg 3 axes (Y1, Y2, X) Hjdpfsyui R Tjx Alaenl CNC CONTROL DT-15 - 15" 2D graphic display - Intuitive touch-screen operation (easy drawing of the bending contour by finger) - User-friendly dialog programming - Automatic bending sequence calculation - Automatic calculation of blank length for sheet cutting - Graphical product and tool memory - Correction options - USB ports for backup and program transfer - PC software enables programming also on PC, with subsequent USB transfer to the machine Servo motor-driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning system Top tool 1010/A/75°, segmented and goose-necked 4-V die block 60x60 2009 (V= 16, 22, 35, and 50 mm) Laser safety device Fiessler AKAS mounted on upper beam Sheet support arms on linear guides Equipment according to CE regulations Oil fill included Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE AD-S: - More stroke, installation height, and throat depth - Higher approach and return speed of the upper beam - Higher backgauge speed - Backgauge fingers on double rather than single linear guide - More available options, such as: additional backgauge axes (e.g., Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measurement system, tandem configuration, alternative CNC controls… Price FCA Turkey Options (prices on request): R-Axis R/Z1/Z2 axes DBend, 3D CAD/CAM import and simulation software (step, iges, and dxf file import) CNC Control Delem DA66 S DA-69S 3D incl. PC software Profile-S with 3D file import function Hydraulic tool clamping systems

Stanje: novo, Leto izdelave: 2025, Condition: new Year of manufacture: 2025 Stock number: 060103 Hnjdpfjwmf Uasx Alaol Delivery time: immediate, subject to prior sale Country of origin: Turkey Price: €7,500 Leasing rate: €121.59 In stock: 1 Special price: €6,300 Saw blade diameter: 350 mm Saw blade dimensions: 350x32x63 mm Saw blade speed: 45 / 80 rpm Mitre angle left: 45° Mitre angle right: 45° Cutting capacity 0° round / square: 115 mm Cutting capacity 45° right round / square: 110 mm Cutting capacity 45° left round / square: 110 mm Motor: 1.8 / 2.2 kW Width: 1,100 mm Depth: 1,000 mm Height: 1,400 mm Weight: 300 kg Semi-automatic circular saw High production performance, ideal for individual parts and small batches Heavy-duty gearbox Cast iron housing Foot switch Hydropneumatic saw head feed for consistent lowering and optimal cutting guidance Pneumatic vice 2 cutting speeds Adjustable saw head stroke to suit the dimensions of the material to be cut Piece counter Mitre 45° right to 45° left Saw blade not included OPTION: Saw blade Dm. 350 mm €180.00

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €163,101 Leasing rate: €3,082.61 Working area: 2000 x 6000 mm Plasma power source: Hypertherm XPR 170 CORE Max. sheet thickness (mild steel): 60 mm Max. sheet thickness (stainless steel): 38 mm Max. sheet thickness (aluminium): 38 mm Max. pierce thickness (mild steel): 35 mm Max. pierce thickness (stainless steel): 22 mm Max. pierce thickness (aluminium): 25 mm Current: 170 A Max. cutting speed: 12 m/min Positioning speed: 35 m/min Positioning accuracy: +/- 0.1 mm Repeatability: 0.1 mm Weight: 6,000 kg HyPerformance plasma source Hypertherm XPR 170 CORE with True Hole technology Automatic gas console Plasma torch height control Laser for zero point determination Collision protection (torch breakaway system) CNC control with AURORA plasma cutting software Lantek CAD/CAM software incl. nesting Filter unit control via CNC Remote diagnostics via network Hnedpfx Aowiq Hajlajl Sheet alignment function Operating manual in GERMAN and ENGLISH Options: - Extraction unit with filter - Additional charge for Optimix instead of Core Further options such as 3D cutting head, drilling head, tube cutting device, oxy-fuel torch, Durma Cloud etc. available on request.

Stanje: novo, Stanje: novo Dobavni rok: cca 12 tednov po naročilu Država izvora: Turčija Cena: 19.600 € Leasing obrok: 376,32 € Maks. debelina pločevine - konstrukcijsko jeklo: 5 mm Maks. premer kroga: 2000 mm Min. premer kroga: 250 mm Dolžina: 3000 mm Širina: 750 mm Višina: 1400 mm Teža: 1350 kg Mobilna upravljalna plošča Hidravlično vpenjanje pločevine Pogonski motor z zavoro Motorizirani sistem za pozicioniranje pločevine Možni so tudi notranji rezi Oprema skladna s CE predpisi Hjdoyq Suajpfx Alajnl MOŽNOSTI: 1 par rezervnih nožev Pripomoček za preoblikovanje robov z 1 parom valjev

Stanje: novo, Condition: new Delivery time: approx. 14-16 weeks from order Country of origin: Turkey Price: €48,000 Leasing rate: €916.80 Max. sheet thickness – mild steel: 6 mm Max. sheet thickness – stainless steel: 4 mm Max. beading radius: 70 mm Max. blank diameter: 4,000 mm Min. blank diameter: 550 mm Motor: 8.75 kW Length: 4,250 mm Width: 720 mm Height: 2,000 mm Weight: 2,015 kg Easy operation via mobile control panel with push buttons Manufactured according to EC safety guidelines and CE marked A set of beading rolls is included. Radius selectable. Min. diameter when cutting: 600 mm (with adapter for small diameters: 400 mm) Min. diameter when beading: 550 mm (with adapter for small diameters: 350 mm) Includes one set of cutting knives Hsdsyq Spwjpfx Alaenl Rotational speed: 70 rpm with adjustable max. torque Upper and lower beading roll drive via planetary gear Hydraulic adjustment for processing both flat and dished parts Cutting and beading with the same head Options such as fixed and adjustable cone holders, adapters for small diameters, cutting wheels for stainless steel, or increased speed ... upon request

Stanje: novo, Stanje: novo Dobavni rok: približno 12 - 14 tednov po naročilu Država izvora: Turčija Cena: 12.800 € Hjdpfx Aljyq Sn Hoasnl Leasing obrok: 245,76 €/mesec Maks. debelina pločevine (konstrukcijsko jeklo): 3,5 mm Izsek: 750 mm Motor: 2,2 kW Hitrost: 6,1 m/min Dolžina: 2000 mm Širina: 600 mm Višina: 1400 mm Teža: 750 kg Minimalni/maksimalni premer kroga: 200/1200 mm Okvir iz varjene jeklene konstrukcije Rezila iz specialnega jekla Dolga življenjska doba rezil zaradi stožčasto ležajnih gredi Pogon z motornim menjalnikom in zavoro Sistem za nastavitev premera reza z motoriziranim pogonom Mobilna upravljalna plošča Sistem za notranji rezni premer Oprema v skladu s CE predpisi

Stanje: novo, Stanje: novo Dostavni rok: cca 12 tednov od naročila Država izvora: Turčija Cena: 6.900 € Leasing rata: 133,17 € Maks. debelina pločevine - konstrukcijsko jeklo: 2 mm Izvit: 700 mm Motor: 1,1 kW Hitrost: 7,5 m/min Dolžina: 1.400 mm Širina: 400 mm Višina: 1.150 mm Teža: 360 kg Min/max premer kroga: 120 / 1.000 mm Izvit na strani noža: 280 mm Reduktor motor z zavoro Nožno stikalo Hjdpfx Aleyq Sntoaonl Centralno mazanje OPCIJA: Pnevmatska nastavitev zgornjih valjev

Stanje: rabljeno, Dobavni rok cca 12 - 14 tednov od naročila Država izvora: Turčija Cena: 20.000 € Maks. debelina pločevine - konstrukcijsko jeklo: 5 mm Iztek: 1200 mm Hitrost: 4,1 m/min Dolžina: 3000 mm Širina: 750 mm Višina: 1400 mm Teža: 1350 kg Hnedeyq Smvepfx Alasl Min./maks. premer ronda: 250 / 2000 mm Iztek na strani noža: 300 mm Mobilna upravljalna plošča Hidravlično vpenjanje pločevine Reduktorski motor z zavoro Motoriziran sistem pozicioniranja pločevine Možni tudi notranji rezi Oprema v skladu s CE direktivami Možnosti: 1 par rezervnih nožev 1.200,00 € Robilna naprava z 1 parom valjev 2.000,00 €

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks ex works Country of origin: Turkey Price: €134,000 Leasing rate: €2,532.60 Bending length: 3,100 mm Max. bending capacity (mild steel): 25 mm Max. plate thickness without prebending at D = 5x top roll: 25 mm Max. plate thickness without prebending at D = 3x top roll: 20 mm Max. plate thickness without prebending at D = 1.5x top roll: 20 mm Max. plate thickness with prebending at D = 5x top roll: 20 mm Max. plate thickness with prebending at D = 1.5x top roll: 16 mm Top roll diameter: 360 mm Lower roll diameter: 360 mm Side roll diameter: 270 mm Max. opening: 60 mm Working height: 1,510 mm Motor power: 22 kW Length: 5,560 mm Width: 2,060 mm Height: 2,050 mm Weight: 16,750 kg 4 rolls PLC Fully hydraulic drive for top and lower rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic lower roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Conical bending device Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment complies with CE regulations OPTIONS: Upper and side plate supports NC control IMPORTANT NOTES FOR CONICAL BENDING: Hodpfx Aloypbquoasnl The max. plate thickness is 50% of the rated capacity The cone length must not exceed 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €70,300 Leasing rate: €1,328.67 Bending length: 3,100 mm Max. bending capacity – mild steel: 8 mm Hnsdpjypbqnsfx Alasl Max. plate thickness without prebending at D=5x top roll: 8 mm Max. plate thickness without prebending at D=1.5x top roll: 6 mm Max. plate thickness with prebending at D=5x top roll: 6 mm Max. plate thickness with prebending at D=1.5x top roll: 5 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 825 mm Motor power: 11 kW Length: 4,880 mm Width: 1,160 mm Height: 1,200 mm Weight: 6,450 kg 4 rolls PLC Fully hydraulic drive for top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gear Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment according to CE regulations OPTIONS: Top and side plate supports NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. plate thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €95,000 Leasing rate: €1,795.50 Bending length: 3,100 mm Max. bending capacity (mild steel): 13 mm Max. sheet thickness without pre-bending (mild steel): 12 mm Max. sheet thickness with pre-bending (mild steel): 8 mm Max. sheet thickness without pre-bending at D=5x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 10 mm Hnjdpfx Alsypbqhjaol Max. sheet thickness with pre-bending at D=5x top roll: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 5,310 mm Width: 1,660 mm Height: 1,590 mm Weight: 10,050 kg 4 rolls PLC Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity on all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Cone bending device Hydraulic drop-end bearing Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in accordance with CE regulations OPTIONS: Top and side sheet support NC control IMPORTANT NOTES FOR CONE ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €62,600 Leasing rate: €1,183.14 Bending length: 2,050 mm Max. bending capacity - steel: 13 mm Max. plate thickness with pre-bending - steel: 10 mm Max. plate thickness without pre-bending at D=5x top roll: 13 mm Max. plate thickness without pre-bending at D=1.5x top roll: 10 mm Max. plate thickness with pre-bending at D=5x top roll: 10 mm Max. plate thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 820 mm Motor power: 11 kW Length: 3,830 mm Hodpsypbqbofx Alasnl Width: 1,160 mm Height: 1,200 mm Weight: 5,000 kg 4 rolls PLC Fully hydraulic drive for top and bottom rolls (for bending capacity ≥ 30 mm, all four rolls driven via planetary gear) Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in compliance with CE regulations OPTIONS: Upper and side sheet supports NC control IMPORTANT POINTS FOR CONICAL BENDING: Max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €83,800 Leasing rate: €1,583.82 Bending length: 2,550 mm Max. bending capacity - structural steel: 15 mm Max. sheet thickness without pre-bending at D=5x top roll: 15 mm Max. sheet thickness without pre-bending at D=3x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 12 mm Max. sheet thickness with pre-bending at D=5x top roll: 12 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 10 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 4,760 mm Width: 1,660 mm Height: 1,155 mm Weight: 8,950 kg 4 rolls PLC control Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment compliant with CE regulations OPTIONS: Upper and side sheet supports NC control system IMPORTANT NOTES FOR CONICAL ROLLING: The max. sheet thickness is 50% of the nominal capacity Hnodpfx Ajypbp Djlasl The cone length can be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €15,900 Lease rate: €305.28 Shaft diameter: 50 - 60 mm Top roller diameter: 180 mm Roller diameter: 180 mm Lower roller diameter: 180 mm Driven rollers: 3 Motor power: 3.75 kW Speed: 6 m/min Flat bar upright (cross-section / min. diameter): 60x10 mm / 500 mm; 20x5 mm Flat bar flat (cross-section / min. diameter): 80x20 mm / 500 mm; 50x5 mm Square bar (cross-section / min. diameter): 32x32 mm / 400 mm; 12x12 mm Round bar (cross-section / min. diameter): Ø 35 mm / 350 mm; Ø 10 mm Tube (cross-section / min. diameter): Ø 60x2 mm / 600 mm; Ø 15 mm Rectangular tube upright (cross-section / min. diameter): 50x25x3 mm / 450 mm; 20x1 mm Square tube (cross-section / min. diameter): 45x3 mm / 600 mm; 20x2 mm Angle iron legs out (cross-section / min. diameter): 60x60x6 mm / 650 mm; 30x3 mm Angle iron legs in (cross-section / min. diameter): 50x50x5 mm / 550 mm; 30x3 mm UPN legs out (cross-section / min. diameter): UPN 80 / 600 mm; UPN 30 / ... Hnedpfx Ajyn R E Sslasl UPN legs in (cross-section / min. diameter): UPN 65 / 600 mm; UPN 30 / ... IPN flat (cross-section / min. diameter): IPN 80 / 600 mm Length: 1200 mm Width: 850 mm Height: 1200 mm Weight: 955 kg 3 driven rollers (brake motor) Hardened drive shafts Hydraulic adjustment of the two lower rollers Hardened universal rollers Lateral straightening rollers, manually adjustable in 3 axes Usable in horizontal and vertical position Digital display for lower roller positions Machine and equipment compliant with CE regulations Operating manual in GERMAN and ENGLISH

Stanje: rabljeno, Leto izdelave: 2023, Condition: used Year of manufacture: 2023 Stock number: 8285 Delivery time: prompt, subject to prior sale Country of origin: Turkey Price: €33,900 In stock: 1 unit Pressing force: 30 tonnes Bending length: 1,050 mm Axes: 3 (Y1, Y2, X) Stroke: 160 mm Distance between frames: 850 mm Throat depth (side stand): 250 mm Installation height: 390 mm Drive system: hydraulic Working speed Y-axis: 10 mm/s Return speed Y-axis: 130 mm/s Backgauge travel X-axis: 495 mm Backgauge speed X-axis: 250 mm/s Table height: 835 mm Table width: 104 mm Oil tank: 75 l Motor power: 7.5 kW Length: 2,470 mm Hodowirnfepfx Alajnl Width: 1,250 mm Height: 2,245 mm Weight: 3,250 kg Demo machine / as new condition Net price (new price: €41,200) 3 axes (Y1, Y2, and X axis) CNC control DT-10 incl. PC software - 10” 2D graphic display - Intuitive touchscreen operation (easy contour drawing with finger) - Direct programming of bend angle - User-friendly dialogue-based programming - Graphic simulation of the bending process - Automatic calculation of developed length for sheet metal blank - Graphic product and tool memory - Correction options - Manual, semi-automatic, and fully automatic operating modes - Tonnage calculation/programming via CNC - Internal data storage - USB ports for backup and program export Motorized backgauge with linear guideways and ball screw spindles Intermediate pieces for upper tool clamping Sheet support arms Side safety guards Equipment compliant with CE regulations Operating manual in GERMAN or ENGLISH OPTION: DBend, 3D CAD/CAM import and simulation software (step, iges and dxf file import) €2,110,-

Stanje: novo, Condition: New Delivery time: Approx. 12–14 weeks from order Country of origin: Turkey Price: €76,820 Leasing rate: €1,451.90 Pressing force: 160 tons Bending length: 4,050 mm Axes: Y1 / Y2 and X axis Stroke: 200 mm Distance between uprights: 3,600 mm Throat depth: 300 mm (side frame) Installation height: 430 mm Drive concept: Hydraulic Rapid traverse speed Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 140 mm/s Backgauge travel X-axis: 620 mm Backgauge speed X-axis: 250 mm/s Table height: 858 mm Table width: 104 mm Motor power: 15 kW Length: 4,850 mm Width: 1,900 mm Height: 2,610 mm Weight: 10,500 kg 3 axes (Y1, Y2 and X axis) CNC CONTROL DT-10: - 10" 2D graphical display - Intuitive touch-screen operation (easy drawing of the bending contour by finger) - User-friendly dialogue-based programming - Automatic calculation of bending sequences - Automatic calculation of flat length for sheet metal blank - Graphical product and tool memory - Correction options - USB ports for backup and program transfer - PC software allows programs to be written on a PC and then transferred to the machine by USB CNC-controlled backgauge with linear guides and ball screw spindles CNC-controlled crowning Intermediates for upper tool clamping Upper tool 1010/A/75°/0.8, segmented, bending radius hardened and ground Die holder for 60 mm dies Die 2009/85° (V 16, 22, 35, 50 mm) segmented, entry radii hardened and ground Hodswird Hspfx Alasnl Fiessler AKAS laser safety device mounted on upper beam Sheet support arms Side and rear safety guards Equipment compliant with CE regulations Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE PBF SERIES: - Compact design - Cost-effective model thanks to serial production of standardized models without any compromise on quality and accuracy OPTIONAL: CNC-controlled R-axis (X adjustment range = 500 mm) DBend, 3D CAD/CAM import and simulation software (supports step, iges and dxf file import) WE HAVE MORE THAN 600 REFERENCES!

Stanje: novo, Leto izdelave: 2025, Condition: New Year of manufacture: 2025 Stock number: 080112 Delivery time: immediate, subject to prior sale Country of origin: Turkey Price: €86,376 Leasing rate: €1,438.29 In stock: 1 Special price: €76,100 Pressing force: 175 t Bending length: 3050 mm Axes: Y1 / Y2 / X and R axis Stroke: 265 mm Distance between uprights: 2600 mm Throat depth (side frame): 450 mm Installation height: 530 mm Drive concept: hydraulic Rapid traverse Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 100 mm/s Backgauge speed X-axis: 500 mm/s Backgauge speed R-axis: 350 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 104 mm Oil tank: 250 l Motor power: 18.5 kW Length: 4250 mm Width: 1700 mm Height: 2850 mm Weight: 10,900 kg 4 axes (Y1, Y2, X, and R axes) CNC CONTROL DT-15 - 15” 2D graphic display - Intuitive touch-screen operation (easy bending contour drawing with finger) - User-friendly dialog programming - Automatic bending sequence calculation - Automatic calculation of flat length for sheet cutting - Graphic storage for products and tools - Correction capability - USB ports for backup and program transfer - PC software for programming on a PC, transferable to the machine via USB Servo-driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning Top tool 1010/A/75°, segmented and offset 4-way die block 60x60 2009 (V = 16, 22, 35, and 50 mm) Fiessler AKAS laser safety device mounted on upper beam Sheet support arms on linear guides Hsdpswiranofx Alaenl Equipment compliant with CE regulations Oil fill Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE AD-S SERIES: - Increased stroke, installation height, and throat depth - Higher approach and return speed of the upper beam - Higher backgauge speed - Backgauge fingers on double rather than single linear guides - More available options, such as additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measurement system, tandem operation, alternative CNC controls, etc. OPTIONS (LEAD TIME FOR THESE OPTIONS APPROX. 10 WEEKS): Z1/Z2 axes DBend, 3D CAD/CAM import and simulation software (step, iges, and dxf file import) CNC control SKY22 CNC control Delem DA66 S CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability Quick clamp lever for the top tool

Stanje: novo, Leto izdelave: 2025, Condition: New Year of manufacture: 2025 Stock number: 080109 Delivery time: immediate, subject to prior sale Country of origin: Turkey Price: €68,282 Leasing rate: €1,135.89 Bestseller: 1 Available in stock: 1 Special price: €60,100 Pressing force: 120 tons Bending length: 3050 mm Axes: Y1 / Y2 / X and R axis Stroke: 180 mm Distance between uprights: 2550 mm Side frame throat depth: 250 mm Installation height: 375 mm Drive concept: hydraulic Rapid traverse Y-axis: 100 mm/s Working speed Y-axis: 9 mm/s Return speed Y-axis: 77 mm/s Backgauge travel (X-axis): 620 mm (with optional R-axis) Backgauge speed X-axis: 250 mm/s Table height: 878 mm Table width: 104 mm Oil tank: 150 l Motor power: 11 kW Length: 3750 mm Width: 1230 mm Height: 2400 mm Weight: 5900 kg 4 axes (Y1, Y2, X, and R axis) CNC CONTROL DT-10 - 2D graphic display 10" - Intuitive touchscreen operation (easy drawing of bend contours with finger) - User-friendly dialogue programming - Automatic calculation of bending sequences - Automatic calculation of flat length for sheet cutting - Graphical product and tool storage - Correction options - USB ports for backup and program transfer - PC software for writing programs on the PC and transferring to the machine via USB CNC-controlled backgauge with linear guides and ball screws CNC-controlled crowning system in the table Intermediate pieces for upper die clamping Upper die 1010/A/75°/0.8, segmented, bending radius hardened and ground Die holder for 60 mm dies Die 2009/85° (V 16, 22, 35, 50 mm) segmented, entry radii hardened and ground Laser safety device Fiessler AKAS mounted on the upper beam Sheet support arms Side and rear safety guards Equipment according to CE regulations Oil fill Operating instructions in GERMAN and ENGLISH ADVANTAGES OF THE PBF SERIES: - Compact design - Cost-effective model thanks to series production of standardized models, with no compromises on quality and precision OPTION: DBend, 3D CAD/CAM import and simulation software (import of step, iges, and dxf files) WE HAVE MORE THAN 600 REFERENCES! Hnjdpfewiq Siex Alael

Stanje: novo, Leto izdelave: 2024, Condition: new Year of manufacture: 2024 Stock number: 8319 Delivery time: prompt, subject to prior sale Country of origin: Turkey Price: €77,982 Leasing rate: €1,326.78 In stock: 1 Special price: €70,200 Press force: 200 tons Bending length: 3,050 mm Axes: Y1 / Y2 / X and R axis Stroke: 210 mm Distance between uprights: 2,550 mm Throat depth (side frame): 250 mm Installation height: 445 mm Drive system: hydraulic Rapid traverse Y-axis: 100 mm/s Working speed Y-axis: 7 mm/s Return speed Y-axis: 73 mm/s Back gauge travel X-axis: 620 mm (with optional R-axis) Back gauge speed X-axis: 250 mm/s Table height: 858 mm Table width: 104 mm Oil tank: 150 l Motor power: 15 kW Length: 3,750 mm Width: 1,390 mm Height: 2,500 mm Weight: 8,160 kg 4 axes (Y1, Y2, X, and R axis) CNC CONTROL DT-10 - 2D graphics display 10" Hjdpfx Alewiqp Isaenl - Intuitive touch screen operation (easy contour drawing with finger) - User-friendly dialog programming - Automatic bending sequence calculation - Automatic calculation of the developed length for sheet cutting - Graphical product and tool library - Correction possibility - USB ports for backup and program transfer - PC software to create programs on PC and transfer via USB to the machine CNC-controlled back gauge with linear guides and ball screws CNC-CONTROLLED CROWNING SYSTEM IN TABLE Intermediates for upper tool clamping Upper tool 1010/A/75°/0.8, segmented, bending radius hardened and ground Die holder for 60 mm dies Die 2009/85° (V 16, 22, 35, 50 mm), segmented, entry radii hardened and ground Laser safety device Fiessler AKAS mounted on the upper beam Sheet support arms Side and rear safety guards Equipment according to CE regulations Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE PBF SERIES: - Compact design - Cost-effective model due to serial production of standardized models without compromising quality and accuracy OPTION: Crowning system motorized and adjustable via CNC control Including: CNC-controlled R-axis (adjustment range in X = 500 mm) Including: DBend, 3D CAD/CAM import and simulation software (step, iges, and dxf file import) WE HAVE MORE THAN 600 REFERENCES!

Stanje: novo, Leto izdelave: 2026, Stanje novo Godina proizvodnje 2026 Inventarski broj 080147 Rok isporuke odmah, prodaja moguća u međuvremenu Zemlja porekla Slovačka Cena 26.400 € Leasing rata 504,24 € Na lageru 1 Pritisna snaga 40 t Dužina savijanja 1500 mm Ose X i Y osa Hod 100 mm Visina ugradnje 310 mm Pogonski koncept hidraulični Rezervoar za ulje 38 l Motor 6 kW Dužina 2000 mm Širina 950 mm Visina 1900 mm Težina 1800 kg Zadnji graničnik 420 mm Matrica 1 Brzina 10 mm/s Brzina povratka 12 mm/s Brzina zadnjeg graničnika 40 mm/s Tačnost prese 0,02 +/- mm Hedpfx Alowiqnqoaonl Tačnost zadnjeg graničnika 0,05 +/- mm 2 ose (Y i X) Motorni zadnji graničnik sa tasterom i ručnim, finim podešavanjem sa brojačem Dubina prešanja Y i gornja mrtva tačka pomoću unapred odabranog upravljanja Međuprsten s brzim steznim polugama za stezanje gornjeg alata Gornji alat 1010/75/R0,8/105 1x835 mm + 1x835 mm podeljen Matrica 2009/85° (V16/22/35/50 mm) 1x835 mm + 1x835 mm podeljen 2 stola za podršku lima Oprema prema CE standardima Ulje napunjeno Uputstvo za upotrebu na nemačkom

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €55,900 Leasing rate: €1,056.51 Bending length: 3,100 mm Max. bending capacity (mild steel): 9 mm Max. sheet thickness without pre-bending at D=5x top roller: 8 mm Max. sheet thickness without pre-bending at D=1.5x top roller: 7 mm Max. sheet thickness with pre-bending at D=5x top roller: 7 mm Max. sheet thickness with pre-bending at D=1.5x top roller: 5 mm Top roller diameter: 245 mm Bottom roller diameter: 245 mm Side roller diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Hsdjyb Sz Ijpfx Alasnl Length: 5,350 mm Width: 1,600 mm Height: 1,470 mm Weight: 6,850 kg 4 rollers Top roller drive via hydromotor and planetary gearbox, bottom roller drive via gear and cardan shaft Hydraulic adjustment of bottom and side rollers Digital readout for bottom and side roller positions Hardened rollers Cone bending device Hydraulic relief for top roller Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel CE-compliant equipment OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roller length Hardened rollers are recommended