Hesse By Coiltech Dozator nakup rabljenega (9.980)

Stanje: novo, Stanje: novo Dobavni rok: približno 12 tednov po oddaji naročila Država izvora: Turčija Cena: 80.100 € Mesečni obrok ob finančnem lizingu: 1.513,89 € Sila stiskanja: 60 ton Hod: 350 mm Bat: 550–850 mm Miza: 600–1000 mm Vgradna višina: 600 mm Hitrost hitrega premika: 100 mm/s Delovna hitrost: 10 mm/s Hitrost povratnega premika: 165 mm/s Motor: 11 kW Dolžina: 1950 mm Širina: 1900 mm Višina: 2850 mm Ndjdpfjwiqz Rjx Al Djb Teža: 5350 kg Delovni tlak: 170 bar Sila stiskanja pri vlečnem stroju: 24 tone Hod pri vlečnem stroju: 150 mm Premer luknje v mizi: 100 mm Delovni tlak pri vlečnem stroju: 156 bar Hitrost povratnega premika pri vlečnem stroju: 65 mm/s Površina vlečnega stroja: 470–650 mm Svetlobne pregrade Vlečni stroj Ročno in avtomatsko upravljanje Ročno nastavljanje hoda s kamnim stikalom Vzdrževalno nezahtevni, samopodmazani 4-delni vodniki bata Napetna plošča z utori v obliki črke T Izvedba v skladu z direktivami „CE“

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €32,480 Leasing rate: €620.37 Bending length: 1,550 mm Max. bending capacity - structural steel: 9 mm Max. plate thickness without pre-bending at D=5x upper roll: 9 mm Max. plate thickness without pre-bending at D=1.5x upper roll: 7 mm Max. plate thickness with pre-bending at D=5x upper roll: 7 mm Max. plate thickness with pre-bending at D=1.5x upper roll: 5 mm Upper roll diameter: 180 mm Lower roll diameter: 180 mm Side roll diameter: 150 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 3,250 kg 4 rolls Top roll drive by hydraulic motor and planetary gearbox, lower roll drive via gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The maximum plate thickness is 50% of the nominal capacity Nodpoynmzpofx Al Dodb The cone length must be a maximum of 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Stanje: novo Nedoynnb Dspfx Al Dedb Dobavni rok: približno 3-6 tednov po naročilu Država izvora: Turčija Cena: 130.600 € Leasing obrok: 2.468,34 € Pritisna sila: 200 t Dolžina mize: 1.200 mm Širina mize: 740 mm Prehodna odprtina v mizi: 220 mm Hod: 24 - 140 mm Število hodov: 50 1/min Tlačilo: 950 x 600 mm Nastavitev tlačila: 100 mm Globina: 390 mm Motor: 15 kW Dolžina: 2.350 mm Širina: 1.700 mm Višina: 3.435 mm Teža: 14.900 kg 8-točkovno vodilo tlačila Sprednje varovalo z varnostno svetlobno zaveso Motorizirana nastavitev tlačila Hidravlična zaščita pred preobremenitvijo Avtomatsko mazanje Oprema v skladu s CE direktivami Navodila za uporabo v NEMŠČINI in ANGLEŠČINI

Stanje: novo, Condition: New Delivery time: approx. 4 months from order Country of origin: Turkey Price: €32,000 Nsdpfxjwiq Hgs Al Dedb Leasing rate: €611.20 Saw frame: Double column guide Saw blade dimensions: 5000 x 34 x 1.1 mm Variable band speed: 20 - 120 m/min Cutting capacity 0° (round): 330 mm Cutting capacity 0° (square): 330 mm Cutting capacity 0° (flat): 350 x 330 mm Working height: 845 mm Hydraulic motor: 1.1 kW Main motor: 3 kW Coolant pump motor: 0.12 kW Length: 2815 mm Width: 1935 mm Height: 1855 mm Weight: 2560 kg Servo feed with 700 mm stroke Cutting length up to 9,999 mm (multiple feed) Omron touchscreen, up to 50 different cutting lengths and 30 programs can be saved Linear guide 41 mm saw blade Control panel Hydraulic vise Hydro-mechanical band tensioning Heavy-duty gearbox Coolant system Sensitive pressure adjustment Inverter for infinitely variable band speed Chip brush Optical height adjustment Chip conveyor Operating manual in GERMAN or ENGLISH OPTIONS: Roller conveyors and saw bands available upon request

Stanje: novo, Condition: New Delivery time: approx. 4 months from order placement Country of origin: Turkey Price: €27,700 Lease rate: €529.07 Saw frame: double-column guide Saw blade dimensions: 6000x41x1.3 mm Infinitely variable blade speed: 20-100 m/min Cutting capacity at 0° round: 560 mm Cutting capacity at 0° square: 560 mm Cutting capacity at 0° flat: 750x560 mm Cutting capacity at 45° round: 410 mm, square: 410 mm Working height: 590 mm Hydraulic motor: 1.1 kW Main motor: 4 kW Coolant pump motor: 0.12 kW Length: 3400 mm Width: 1000 mm Height: 2050 mm Weight: 2045 kg Saw blade inclined by 2° Linear guides Operator control panel Material sensor pin Coolant system Roller conveyor 1200 mm Hydraulic vice Hydromechanical blade tensioning Frequency inverter for stepless blade speed adjustment Adjustable cutting pressure Saw blade brush Optical height control Safety switch Operating manual in GERMAN or ENGLISH OPTIONS: Swivel base for miter cuts Hydraulic material clamping from above Minimum quantity lubrication Ndjdjwiqt Hopfx Al Dsb Laser cutting line Roller conveyors and saw blades

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €51,900 Leasing rate: €980.91 Shaft diameter: 120 mm Roller diameter: 390 mm Driven rollers: 3 Motor power: 15 kW Speed: 2 / 7.5 m/min Flat bar upright (cross-section / min. diameter): 125x25 mm / 1,200 mm; 30x Flat bar flat (cross-section / min. diameter): 200x50 mm / 1,000 mm; 100x Square bar (cross-section / min. diameter): 65x65 mm / 750 mm; 20x20 mm Round bar (cross-section / min. diameter): Ø 80 mm / 850 mm; Ø 20 mm Tube (cross-section / min. diameter): Ø 160x4 mm / 2,800 mm; Ø ... Rectangular tube upright (cross-section / min. diameter): 120x40x4 mm / 1,800 mm; 3x Square tube (cross-section / min. diameter): 90x90x5 mm / 1,800 mm; 30x Angle iron, leg outwards (cross-section / min. diameter): 120x120x12 mm / 1,200 mm; Angle iron, leg inwards (cross-section / min. diameter): 100x100x10 mm / 1,200 mm; UPN, leg outwards (cross-section / min. diameter): UPN 220 / 1,000 mm; UPN 1... UPN, leg inwards (cross-section / min. diameter): UPN 220 / 1,200 mm; UPN 1... IPN horizontal (cross-section / min. diameter): IPN 220 / 1,000 mm; IPN 8... Length: 2,000 mm Width: 1,650 mm Height: 1,900 mm Weight: 4,450 kg Ndedpfx Aljynmrus Deb 3 driven rollers (hydraulic motor and planetary gearbox) Shafts made of hardened and ground special steel Hydraulic adjustment of both lower rollers Hardened universal rollers Side guide rolls hydraulically adjustable in 3 axes 2 speeds Usable horizontally and vertically Mobile control panel Digital display (3 axes) Machine and equipment according to CE standards Operating manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES!

Stanje: novo, Stanje novo Dobavni rok cca 12 tednov od naročila Država izvora Turčija Ndodpsyb S Afefx Al Deb Cena 38.000 € Leasing obrok 725,8 € Dolžina upogibanja 2050 mm Maks. zmogljivost upogibanja – konstrukcijsko jeklo 8 mm Maks. debelina pločevine brez predupogiba – konstrukcijsko jeklo 8 mm Maks. debelina pločevine s predupogibom – konstrukcijsko jeklo 6 mm Maks. debelina pločevine brez predupogiba pri D=5x zgornji valj 8 mm Maks. debelina pločevine brez predupogiba pri D=1,5x zgornji valj 6 mm Maks. debelina pločevine s predupogibom pri D=5x zgornji valj 6 mm Maks. debelina pločevine s predupogibom pri D=1,5x zgornji valj 4 mm Premer zgornjega valja 180 mm Premer spodnjega valja 180 mm Premer stranskega valja 150 mm Hitrost valjanja 5 m/min Dolžina 3850 mm Širina 1350 mm Višina 1290 mm Teža 3300 kg Motoriziran pogon valjev Poganjana zgornji in spodnji valj Hidravlično nastavljanje stranskih valjev 3 digitalni prikazovalniki Hidravlična preklopna ležišča Kaljeni valji Naprava za konusno upogibanje Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €88,113 Leasing rate: €1,665.34 Pressing force: 220 t Bending length: 3,050 mm Axes: Y1 / Y2 / X axis Stroke: 265 mm Distance between uprights: 2,600 mm Throat depth: 450 mm (side frame) Installation height: 530 mm Drive system: hydraulic Rapid traverse Y-axis: 140 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 140 mm/s Backgauge speed X-axis: 500 mm/s Backgauge speed R-axis: 350 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 104 mm Oil tank: 250 l Motor power: 22 kW Length: 4,250 mm Width: 1,770 mm Height: 3,000 mm Weight: 12,600 kg Standard equipment: – 3 axes (Y1, Y2, X) – CNC control DT-15 - 2D graphic display 15” - Intuitive touch-screen operation (easy drawing of bending contour with finger) - User-friendly dialog-based programming - Automatic bending sequence calculation - Automatic calculation of developed length for sheet cutting - Graphic product and tool memory - Correction options - USB ports for backup and program transfer - PC software allowing programs to be written on PC and then transferred to the machine via USB – Servo-driven backgauge on linear guides and ballscrews – Backgauge finger blocks on double linear guides – CNC-controlled crowning – Upper tool 1010/A/75°, segmented and offset – 4-V die block 60x60 2009 (V = 16, 22, 35, and 50 mm) – Laser safety device Fiessler AKAS mounted on upper beam – Sheet support arms on linear guides – Equipment according to CE directives – Oil filling – Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE AD-S SERIES: – Greater stroke, installation height, and throat depth – Higher approach and return speeds of the upper beam – Increased backgauge speed – Backgauge fingers mounted on double, not single, linear guides – More available options, e.g., additional backgauge axes (such as Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measurement system, tandem configuration, alternative CNC controls, etc. Ndjdpfswiqudsx Al Deb OPTIONS: – R-axis – R/Z1/Z2 axes – CNC control Delem DA66 S – CNC control DELEM DA-69S 3D incl. PC software Profile-S with import function for 3D files – Hydraulic or pneumatic tool clamping for Euro or Wila tooling

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €102,300 Leasing rate: €1,933.47 Pressing force: 80 tons Bending length: 2,550 mm Axes: 4 Stroke: 320 mm Distance between uprights: 2,840 mm Installation height: 500 mm Drive concept: servo-motorized belt drive Rapid traverse Y-axis: 105 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 105 mm/s Back gauge travel X-axis: 650 mm Back gauge travel R-axis: 250 mm Length: 3,700 mm Width: 2,200 mm Height: 2,550 mm Weight: 6,400 kg Servo-motorized drive Power transmission via multi-guided flat belt 4 axes (Y1, Y2, X, R) CNC control DELEM DA-66S - 17" 2D graphics display - 3D visualization in simulation and production - Intuitive touch screen operation (easy drawing of bending contours with finger) - Simple and convenient data transfer - Multi-simulation capability - User-friendly dialog programming - Graphical simulation of bending process Servo-driven back gauge with linear guides and ball screws Back gauge finger blocks with double linear guides Intermediates for upper tool clamping Upper tool 1010/A/75°/0.8/105, segmented, bending radius hardened and ground Die holder for 60 mm dies Die 2009/85° (V 16, 22, 35, 50 mm), segmented, entry radii hardened and ground BLVT light barrier safety system Nodpfx Aleynndfs Dodb Sheet support arms with linear guides Side and rear safety barriers Equipment in accordance with CE regulations Operating instructions in GERMAN or ENGLISH Advantages of this design: - No reduction of working width due to side frames, distance between uprights is larger than the bending length - Up to 30% higher productivity versus conventional hydraulic press brakes due to almost instantaneous pedal signal response - Minimal frame deflection - No crowning system required as bending force is applied over many points along bending length - High repeatability and bending accuracy throughout entire bending length - Low energy consumption - No hydraulic components Options: CNC control DELEM DA-69S 3D including PC software Profile-S with 3D file import capability

Stanje: novo, Condition: New Delivery time: Approx. 12–14 weeks from order Country of origin: Turkey Price: €76,820 Leasing rate: €1,451.90 Pressing force: 160 tons Bending length: 4,050 mm Axes: Y1 / Y2 and X axis Stroke: 200 mm Distance between uprights: 3,600 mm Throat depth: 300 mm (side frame) Installation height: 430 mm Drive concept: Hydraulic Rapid traverse speed Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 140 mm/s Backgauge travel X-axis: 620 mm Backgauge speed X-axis: 250 mm/s Table height: 858 mm Table width: 104 mm Motor power: 15 kW Length: 4,850 mm Width: 1,900 mm Height: 2,610 mm Weight: 10,500 kg 3 axes (Y1, Y2 and X axis) CNC CONTROL DT-10: - 10" 2D graphical display - Intuitive touch-screen operation (easy drawing of the bending contour by finger) - User-friendly dialogue-based programming - Automatic calculation of bending sequences - Automatic calculation of flat length for sheet metal blank - Graphical product and tool memory - Correction options - USB ports for backup and program transfer - PC software allows programs to be written on a PC and then transferred to the machine by USB CNC-controlled backgauge with linear guides and ball screw spindles CNC-controlled crowning Intermediates for upper tool clamping Upper tool 1010/A/75°/0.8, segmented, bending radius hardened and ground Die holder for 60 mm dies Die 2009/85° (V 16, 22, 35, 50 mm) segmented, entry radii hardened and ground Fiessler AKAS laser safety device mounted on upper beam Sheet support arms Side and rear safety guards Equipment compliant with CE regulations Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE PBF SERIES: - Compact design - Cost-effective model thanks to serial production of standardized models without any compromise on quality and accuracy OPTIONAL: Ndjdpfx Aowird Hsl Djb CNC-controlled R-axis (X adjustment range = 500 mm) DBend, 3D CAD/CAM import and simulation software (supports step, iges and dxf file import) WE HAVE MORE THAN 600 REFERENCES!

Stanje: novo, Stanje: novo Rok isporuke: oko 14 - 16 nedelja od porudžbine Zemlja porekla: Turska Cena: 29.800 € Leasing rata: 569,18 € Okvir testere: zakretni okvir Dimenzije tračne testere: 3660x27x0,9 mm Brzina trake: kontinuirano podesiva 15-120 m/min Kapacitet sečenja 0° okruglo: 320 mm Kapacitet sečenja 0° kvadrat: 320 mm Kapacitet sečenja 0° ravno: 350x320 mm Kapacitet sečenja 30° okruglo: 170 mm, kvadrat: 150 mm Kapacitet sečenja 45° okruglo: 260 mm, kvadrat: 220 mm Kapacitet sečenja 60° okruglo: 320 mm, kvadrat: 280 mm Radna visina: 740 mm Hidraulički motor: 1,1 kW Motor: 2,2 kW Servomotor: 1 kW Motor pumpe za rashladno sredstvo: 0,12 kW Dužina: 2120 mm Širina: 2100 mm Visina: 1810 mm Težina: 1810 kg Ndedpfxjwirhlj Al Djb NC kontrolni panel Servo pomeranje sa kugličnim navojnim vretenima Hidraulička stezna glava Hidromehaničko zatezanje trake Inverter Pumpa za hlađenje Tračna testera Četka za strugotinu Sigurnosni prekidač Podešavanje visine Uputstvo za upotrebu na NEMAČKOM ili ENGLESKOM OPCIJE (CENE NA UPIT): Hidraulički uređaj za stezanje paketa Transportni valjci i tračne testere

Stanje: novo, Leto izdelave: 2026, Stanje: novo Letnik izdelave: 2026 Številka zaloge: 090204 Dobavni rok: takoj, vmesna prodaja možna Država izvora: Turčija Cena: 4.290 € Na zalogi: 1 Dolžina reza: 1250 mm Maks. debelina pločevine - konstrukcijsko jeklo: 1,5 mm Zadnji prislon: 500 mm Dolžina: 2250 mm Širina: 1000 mm Višina: 1150 mm Teža: 460 kg Varjena jeklena konstrukcija Z ročnim pritiskačem Zadnji prislon nastavljiv ročno preko ročnega kolesa Navodila za uporabo v ANGLEŠČINI Ndodpjyz Dc Sofx Al Dob

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks ex works Country of origin: Turkey Price: €134,000 Leasing rate: €2,532.60 Bending length: 3,100 mm Max. bending capacity (mild steel): 25 mm Max. plate thickness without prebending at D = 5x top roll: 25 mm Max. plate thickness without prebending at D = 3x top roll: 20 mm Max. plate thickness without prebending at D = 1.5x top roll: 20 mm Max. plate thickness with prebending at D = 5x top roll: 20 mm Max. plate thickness with prebending at D = 1.5x top roll: 16 mm Top roll diameter: 360 mm Lower roll diameter: 360 mm Side roll diameter: 270 mm Max. opening: 60 mm Working height: 1,510 mm Motor power: 22 kW Length: 5,560 mm Width: 2,060 mm Height: 2,050 mm Weight: 16,750 kg 4 rolls PLC Fully hydraulic drive for top and lower rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic lower roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Conical bending device Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment complies with CE regulations OPTIONS: Upper and side plate supports NC control IMPORTANT NOTES FOR CONICAL BENDING: The max. plate thickness is 50% of the rated capacity Ndedpsypbqusfx Al Dob The cone length must not exceed 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 14 - 16 weeks from order Country of origin: Turkey Price: €104,600 Leasing rate: €1,976.94 Saw frame: Double-column guidance Saw blade dimensions: 10,430 x 54 x 1.6 mm Blade speed: steplessly adjustable 20-100 m/min Cutting capacity 0° round: 750 mm Cutting capacity 0° flat: 1300 x 700 mm Cutting capacity 45° rectangular: 850 x 750 mm Cutting capacity 60° rectangular: 570 x 750 mm Cutting capacity -45° rectangular: 850 x 750 mm Working height: 930 mm Hydraulic motor: 4 kW Main motor: 11 kW Coolant pump motor: 0.12 kW Length: 5,500 mm Width: 2,280 mm Height: 3,400 mm Weight: 8,500 kg Hydraulic vice Digital angle display Hydraulic clamping of the saw arm Manual saw arm rotation Infinitely adjustable saw arm lowering speed Automatic saw frame lift after cut completion Sensitive cutting pressure adjustment depending on material properties Hydromechanical blade tension, readable via pressure gauge Mobile control panel Spiral-bevel heavy-duty gearbox Driven chip brush Blade guidance via carbide plates and rollers Automatic blade breakage protection Coolant device Hydraulic saw frame lift Operating manual in GERMAN or ENGLISH Nedpfx Aeynm Rdjl Djdb OPTIONS: Roller conveyors and saw blades on request

Stanje: novo, Condition: New Delivery time: approx. 14 - 16 weeks from order Country of origin: Turkey Price: €46,400 Leasing rate: €886.24 Saw frame: double-column guide Saw blade dimensions: 6800 x 41 x 1.3 mm Blade speed: stepless adjustment, 20-100 m/min Cutting capacity 0° round: 560 mm Cutting capacity 0° flat: 820 x 540 mm Cutting capacity 45° rectangular: 550 x 540 mm Cutting capacity 60° rectangular: 360 x 540 mm Cutting capacity -45° rectangular: 550 x 540 mm Working height: 880 mm Hydraulic motor: 1.1 kW Main motor: 4 kW Coolant pump motor: 0.12 kW Length: 3800 mm Width: 1750 mm Height: 2350 mm Weight: 3,200 kg Hydraulic vice Digital display for angle indication Hydraulic clamping of the saw arm Manual rotation of the saw arm Continuously adjustable lowering speed of the saw arm Automatic saw frame lift after cutting cycle Sensitive cutting pressure regulation according to material characteristics Hydromechanical blade tension with pressure gauge display Mobile control panel Obliquely toothed, conical heavy-duty gearbox Powered swarf brush Blade guide via carbide plates and rollers Automatic blade breakage protection Coolant system Ndjdpfjwiqx Asx Al Dsb HYDRAULIC SAW FRAME LIFTING Operating instructions in GERMAN or ENGLISH (Roller conveyor as shown in the photo—available at extra cost)

Stanje: novo, Stanje: novo Dobavni rok: približno 12 tednov od oddaje naročila Država izvora: Turčija Cena: 91.200 € Mesečni obrok ob finančnem lizingu: 1.723,68 € Sila stiskanja: 100 ton Hod: 500 mm Bat: 600 x 900 mm Miza: 700 x 1100 mm Višina vgrajenega stroja: 750 mm Ndjdpfswir Dgex Al Dsb Izvis: 320 mm Hitri hod: 100 mm/s Delovna hitrost: 8,5 mm/s Hitrost povratnega hoda: 165 mm/s Motor: 11 kW Dolžina: 2100 mm Širina: 1900 mm Višina: 3350 mm Teža: 7300 kg Delovni tlak: 240 bar Sila stiskanja povlečnega plošče: 30 ton Hod povlečnega plošče: 200 mm Premer luknje v mizi: 120 mm Delovni tlak povlečnega plošče: 170 bar Hitrost povratnega hoda povlečnega plošče: 52 mm/s Površina povlečnega plošče: 700 x 400 mm Upravljanje z dvema rokama Nadzor prek programirljivega logičnega krmilnika (PLC) Nastavljiv hod povlečnega plošče Bat brez potrebe po mazivu Fotoelektrične pregrade

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €292,300 Pressing force: 600 t Bending length: 6,050 mm Axes: Y1 / Y2 / X and R axis Stroke: 365 mm Distance between uprights: 5,100 mm Throat depth in side frames: 510 mm Installation height: 700 mm Drive system: hydraulic Rapid traverse Y-axis: 80 mm/s Working speed Y-axis: 6.5 mm/s Return speed Y-axis: 80 mm/s Backgauge travel X-axis: 750 mm Oil tank capacity: 280 l Motor: 2 x 11 kW Length: 7,600 mm Width: 2,650 mm Height: 3,950 mm Weight: 52,500 kg ONE SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2, X and R) CNC CONTROL SKY 22 - Full HD graphic display 21.5" with 2D and 3D visualization of the programmed workpiece - Intuitive touch-screen operation (draw the bending contour easily with your finger) - User-friendly programming in dialog mode selectable in 2D or 3D - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of flat length for sheet metal blank - Automatic calculation of bending sequence - Graphic product and tool memory - Correction feature - USB ports and Ethernet connection for import, backup, and program outsourcing - Operating system: Windows - Import support for IGES, STEP, DXF files Servo-motorized backgauge on linear guides and ball screw spindles Backgauge finger blocks on double linear guides CNC-controlled crowning Top tool 1010/A/75°, segmented and offset 4-V die block 60x60 2009 (V= 16, 22, 35, and 50 mm) Fiessler AKAS laser protection device mounted on the upper beam Sheet support arms on linear guides Nsdpfxjwiqmas Al Dodb Equipment according to CE regulations Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - Hydraulics run only during upper beam movement - Low energy consumption - Low noise emissions - High speed PRICE FCA TURKEY Options: CNC control Delem DA-66 S CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €31,600 Leasing rate: €603.56 Bending length: 2,050 mm Max. bending capacity - mild steel: 6 mm Max. plate thickness without pre-bending at D=5x top roll: 6 mm Max. plate thickness without pre-bending at D=1.5x top roll: 4 mm Max. plate thickness with pre-bending at D=5x top roll: 4 mm Max. plate thickness with pre-bending at D=1.5x top roll: 3 mm Top roll diameter: 150 mm Lower roll diameter: 150 mm Side roll diameter: 130 mm Ndodsyb Szbepfx Al Deb Rolling speed: 1.5 / 6 m/min Motor power: 4 kW Length: 4,250 mm Width: 960 mm Height: 1,100 mm Weight: 2,800 kg 4 rolls Top roll driven by hydromotor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of the lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Movable control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: Max. plate thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Stanje: novo Dobavni rok: približno 10 tednov po naročilu Država izvora: Turčija Cena: 86.300 € Leasing obrok: 1.631,07 € Tlačna sila: 150 t Hod: 300 mm Bata: 950x650 mm Miza: 1200x750 mm Vgradna višina: 550 mm Hitri pomik: 100 mm/s Nedpfxowiq Tyo Al Djdb Delovna hitrost: 5,5 mm/s Hitrost povratka: 165 mm/s Motor: 11 kW Dolžina: 2200 mm Širina: 2200 mm Višina: 3250 mm Teža: 8.200 kg 4-točkovno vodenje bata Miza in bat z T-utoroma Ročna nastavitev hoda preko krmilnega stikala Ročno in avtomatsko delovanje Svetlobne zavese Oprema v skladu s CE standardi

Stanje: novo, Condition: New Delivery time: approx. 4-6 months from order Country of origin: Turkey Price: €231,900 Pressing force: 400 tons Bending length: 6050 mm Axes: Y1 / Y2 / X and R axes Stroke: 365 mm Distance between uprights: 5100 mm Throat depth (side frame): 510 mm Installation height: 630 mm Drive concept: hydraulic Rapid traverse Y-axis: 150 mm/s Working speed Y-axis: 9 mm/s Return speed Y-axis: 150 mm/s Backgauge travel X-axis: 750 mm Oil tank: 160 l Length: 7500 mm Width: 2110 mm Height: 3810 mm Nodewir Avepfx Al Dodb Weight: 34,600 kg ONE SERVOMOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2, X and R) CNC CONTROL SKY 22 - Full HD graphic display 21.5" with 2D and 3D representation of the programmed workpiece - Intuitive touch-screen operation (simple drawing of the bending contour with your finger) - User-friendly programming via dialog, selectable in 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of flat length for sheet blank - Automatic bending sequence calculation - Graphical product and tool memory - Correction options - USB ports and Ethernet connection for import, backup, and program outsourcing - Operating system: Windows - Import support for IGES, STEP, DXF files Servo motor-driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning Upper tool 1010/A/75°, segmented and goosenecked 4-way die block 60x60 2009 (V= 16, 22, 35 and 50 mm) Laser safety device Fiessler AKAS mounted on upper beam Sheet support arms on linear guides Equipment according to CE regulations Oil filling Operating instructions in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - The hydraulics operate only during upper beam movement - Low energy consumption - Low noise level - High speed PRICE FCA TURKEY Options: - CNC control Delem DA-66 S - CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability

Stanje: novo, Stanje novo Dobavni rok približno 3–6 tednov po naročilu Država izvora: Turčija Cena: 62.500 € Leasing mesečna rata: 1.181,25 € Tlačna moč: 63 t Dolžina mize: 750 mm Širina mize: 500 mm Prehodna odprtina v mizi: 170 mm Hod: 4–102 mm Število hodov: 54 1/min Bata velikost: 490x325 mm Nastavitev bata: 90 mm Izmet: 270 mm Čista razdalja okvirja: 440 mm Njdpfsynna Tjx Al Dedb Motor: 7,5 kW Dolžina: 1800 mm Širina: 1150 mm Višina: 2750 mm Teža: 4100 kg 8-kratno vodilo bata Sprednja zaščita s svetlobno zaveso Ročna nastavitev hoda Nastavitev bata preko raglje Pogon preko menjalnika Elektropnevmatska kombinacija sklopke in zavore Fiksna delovna miza Enojni in trajni hod Pedal in dvoročna upravljanja Mehanska zaščita pred preobremenitvijo Samodejno centralno mazanje Oprema v skladu s CE predpisi Navodila za uporabo v NEMŠČINI in ANGLEŠČINI (Simbilična slika)

Stanje: novo, Leto izdelave: 2026, Stanje: novo Leto izdelave: 2026 Inventarna številka: 070168 Dobava: takojšnja, vmesna prodaja možna Država izvora: Turčija Cena: 10.900 € Leasing obrok: 209,28 € Na zalogi: 1 kos Tlačna sila: 150 t Cilinder fiksen ali premakljiv, horizontalno pomičen Hod: 300 mm Njdewirt Iopfx Al Djdb Prosta razdalja med stebri: 1.070 mm Premer bata: 280x200 mm Delovna hitrost: 5 mm/s Povratna hitrost: 10 mm/s Dolžina: 2.110 mm Širina: 1.000 mm Višina: 2.480 mm Teža: 1.870 kg S horizontalno pomičnim cilindrom z vpenjalno ročico Jeklena varjena konstrukcija Poljubna pozicija zaustavitve Manometer Varnostni ventil proti preobremenitvi 2 V-prizme Miza nastavljiva po višini Dviganje/spuščanje mize Krmiljenje z upravljalno ročko Opremljeno v skladu s CE predpisi Navodila za uporabo v NEMŠČINI in ANGLEŠČINI

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €160,788 Leasing rate: €3,038.89 Laser power: 3 kW Max. sheet thickness - mild steel: 12 mm Max. sheet thickness - stainless steel: 6 mm Max. sheet thickness - aluminum: 6 mm Max. sheet thickness - copper: 3 mm Max. sheet thickness - brass: 6 mm Nedpfx Aswiqr Ael Dedb Total connected load: 26.5 kW Max. tube diameter: 250 mm Min. tube diameter: 16 mm Max. dimensions for square profiles: 160 x 160 mm Max. dimensions for rectangular profiles: 200 x 150 mm Max. profile length: 6,000 mm Max. profile weight: 58 kg/m Positioning accuracy: +/- 0.2 mm Repeatability: +/- 0.05 mm Profile types: round, square, rectangular Max. X-axis speed: 40 m/min Max. Y-axis speed: 94 m/min Max. Z-axis speed: 30 m/min Max. A-axis speed: 510 °/s The system includes the following components: - Enclosed cutting area with safety glass - CNC graphic control with touchscreen - Brilase 3 kW premium laser source incl. chiller - Cutting head with automatic focus adjustment - Manual loading - Manual unloading table, 3 m - Positioning laser - Central lubrication - Scrap container - CAD/CAM software with autonesting - Work area lighting PRICE FCA TURKEY OPTIONS: - Extraction unit with filters - Semi-automatic front loading system - 6 m unloading table with conveyor unit - Durma Cloud license - Laser source with 4 or 6 kW (on request)

Stanje: novo, Leto izdelave: 2025, Condition: New Year of manufacture: 2025 Stock number: 090089 Delivery time: Immediate, subject to prior sale Country of origin: Turkey Price: €8,900 Leasing rate: €171.77 Available in stock: 1 unit Press force: 20 t Stroke: 185 mm Max. bending capacity (mild steel): 200 x 12 mm Table dimensions: 480 x 1060 mm Pin height: 200 mm Pin diameter: 80 mm Working speed: 10 mm/s Return speed: 10 mm/s Nedpjwiqt Tofx Al Dodb Motor: 2.2 kW Working height: 930 mm Length: 1,150 mm Width: 480 mm Height: 1,200 mm Weight: 530 kg Programmable stroke and return position Adjustable speed and pressure Manual jog mode and automatic operating mode Mounting pins and tools hardened and ground 3 mounting pins Press brake tool Manual back gauge 400 mm Foot pedal OPTIONS: Cutting, punching or pipe bending tools available on request.

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks after order Country of origin: Turkey Price: €114,100 Leasing rate: €2,156.49 Pressing force: 135 tons Bending length: 3,050 mm Axes: 4 Stroke: 320 mm Distance between uprights: 3,340 mm Installation height: 500 mm Drive concept: servo-driven belt system Rapid traverse Y axis: 100 mm/s Working speed Y axis: 10 mm/s Return speed Y axis: 100 mm/s Backgauge travel X axis: 650 mm Backgauge travel R axis: 250 mm Length: 4,200 mm Width: 2,200 mm Height: 2,550 mm Weight: 7,300 kg Servo motor drive Nsdpfowirkyox Al Djdb Power transmission via multi-guided flat belt 4 axes (Y1, Y2, X, R) CNC CONTROL: DELEM DA-66S - 17" 2D graphic display - 3D visualization in simulation and production - Intuitive touchscreen operation (simple contour drawing with a finger) - Easy and convenient data transfer - Multiple simulation modes - Operator-friendly dialog programming - Graphical simulation of bending sequence Servo-driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides Adapters for upper tool clamping Upper tooling: 1010/A/75°/0.8/105, segmented, bending radius hardened and ground Die holder for 60 mm dies Die: 2009/85° (V 16, 22, 35, 50 mm), segmented, lead-in radius hardened and ground BLVT light curtain protection device Sheet support arms on linear guide rails Side and rear safety fences Equipment in accordance with CE standards Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - No reduction of the working width by the side frames: the distance between the uprights is greater than the bending length - Up to 30% higher productivity compared to conventional hydraulic press brakes thanks to almost immediate response to foot pedal signals - Minimal frame deflection - No crowning system required, as the bending force is introduced at multiple points along the bending length - High repeatability and bending precision across the entire bending length - Low energy consumption - No hydraulic components Options: CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability