Hess Stiskanje Okvirja nakup rabljenega (1.834)

Stanje: novo, Stanje novo Dobavni rok cca 12 tednov od naročila Država izvora Turčija Cena 29.000 € Leasing obrok 553,9 € Upogibna dolžina 2.050 mm Najv. upogibna zmogljivost - konstrukcijsko jeklo 4 mm Najv. debelina pločevine brez pregiba pri D=5x zgornji valj 4 mm Najv. debelina pločevine brez pregiba pri D=1,5x zgornji valj 3 mm Najv. debelina pločevine s pregibom pri D=5x zgornji valji 3 mm Najv. debelina pločevine s pregibom pri D=1,5x zgornji valj 2 mm Premer zgornjega valja 130 mm Premer spodnjega valja 130 mm Premer stranskih valjev 130 mm Hitrost valjanja 5 m/min Motor 2,2 + 1,1 kW Dolžina 3.800 mm Širina 1.150 mm Višina 1.110 mm Teža 2.450 kg Motoriziran pogon valjev Pogonjen zgornji in spodnji valj Hidravlično nastavljivi stranski valji 3 digitalni prikazovalniki Hidravlična odklopna ležišča Kaljeni valji Nastavek za stožčasto upogibanje Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI MOŽNOSTI (CENE NA POVPRAŠEVANJE): Fodpfoyb Sy Dsx Abrjgh Zgornja podpora Stranska podpora Spremenljiva hitrost NC krmiljenje

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €31,600 Leasing rate: €603.56 Bending length: 2,050 mm Max. bending capacity - mild steel: 6 mm Max. plate thickness without pre-bending at D=5x top roll: 6 mm Max. plate thickness without pre-bending at D=1.5x top roll: 4 mm Max. plate thickness with pre-bending at D=5x top roll: 4 mm Max. plate thickness with pre-bending at D=1.5x top roll: 3 mm Top roll diameter: 150 mm Lower roll diameter: 150 mm Side roll diameter: 130 mm Rolling speed: 1.5 / 6 m/min Motor power: 4 kW Length: 4,250 mm Width: 960 mm Height: 1,100 mm Weight: 2,800 kg 4 rolls Top roll driven by hydromotor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of the lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Movable control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: Fgodpfx Abjyb Szbsrsh Max. plate thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €28,450 Leasing rate: €543.40 Bending length: 1,550 mm Max. bending capacity – construction steel: 7 mm Max. sheet thickness without pre-bending at D=5x top roller: 7 mm Max. sheet thickness without pre-bending at D=1.5x top roller: 4.5 mm Max. sheet thickness with pre-bending at D=5x top roller: 4.5 mm Max. sheet thickness with pre-bending at D=1.5x top roller: 3.5 mm Top roller diameter: 150 mm Bottom roller diameter: 150 mm Side roller diameter: 130 mm Rolling speed: 1.5 / 6 m/min Motor power: 4 kW Length: 3,750 mm Width: 960 mm Height: 1,100 mm Weight: 2,500 kg 4 rollers Top roller driven by hydraulic motor and planetary gearbox, lower rollers driven by gear and cardan shaft Hydraulic adjustment of lower and side rollers Digital display for lower and side roller positions Hardened rollers Cone bending device Hydraulic release of top roller Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE directive OPTIONS: (Delivery time with options approx. 10 weeks) Infinitely variable rolling speed Fgjdoyb Szhjpfx Abrjh Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: Maximum sheet thickness is 50% of rated capacity Cone length must be max. 30% or more than 60% of roller length Hardened rollers are recommended

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €46,300 Leasing rate: €884.33 Bending length: 2,050 mm Max. bending capacity – mild steel: 11 mm Max. plate thickness without pre-bending at D=5x top roll: 11 mm Max. plate thickness without pre-bending at D=1.5x top roll: 9 mm Max. plate thickness with pre-bending at D=5x top roll: 9 mm Max. plate thickness with pre-bending at D=1.5x top roll: 7 mm Top roll diameter: 220 mm Bottom roll diameter: 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 4,400 mm Width: 1,150 mm Height: 1,250 mm Weight: 4,080 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox; bottom roll driven by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Fodpfx Absyb Szueregh Mobile control panel Equipment compliant with CE regulations OPTIONS: Infinitely variable roll speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: Max. plate thickness is 50% of nominal capacity Cone length must be max. 30% or more than 60% of roll length Hardened rolls are recommended

Stanje: novo, Stanje: novo Dobavni rok: približno 12 tednov od naročila Država izvora: Turčija Cena: 24.500 € Lizing obrok: 470,4 € Dolžina upogibanja: 1550 mm Največja zmogljivost upogibanja - konstrukcijsko jeklo: 4,5 mm Največja debelina pločevine brez upogibanja - konstrukcijsko jeklo: 4,5 mm Največja debelina pločevine z upogibanjem - konstrukcijsko jeklo: 3,5 mm Največja debelina pločevine brez upogibanja pri D=5x zgornji valj: 4,5 mm Največja debelina pločevine brez upogibanja pri D=1,5x zgornji valj: 3,5 mm Največja debelina pločevine z upogibanjem pri D=5x zgornji valj: 3,5 mm Največja debelina pločevine z upogibanjem pri D=1,5x zgornji valj: 2,5 mm Premer zgornjega valja: 130 mm Premer spodnjega valja: 130 mm Premer stranskega valja: 130 mm Hitrost valjanja: 5 m/min Motor: 2,2 + 1,1 kW Dolžina: 3300 mm Širina: 1150 mm Višina: 1110 mm Teža: 2370 kg Motoriziran pogon valjev Zgornji in spodnji valj gnana Hidravlična nastavitev stranskih valjev 3 digitalni prikazovalniki Hidravlično odpiranje ležišča Kaljena valja Naprava za stožčasto krivljenje Uporabniški priročnik v NEMŠČINI ali ANGLEŠČINI OPCIJE (CENE NA POVPRAŠEVANJE): Zgornja podpora Stranska podpora Spremenljiva hitrost Fgedpeynmwdofx Abrjh NC krmiljenje

Stanje: novo, Condition: new Delivery time: approx. 14 – 16 weeks from order Country of origin: Turkey Price: €252,800 Press force: 600 tons Bending length: 4,050 mm Axes: Y1 / Y2 / X and R axis Stroke: 365 mm Distance between uprights: 3,100 mm Frame gap clearance: 410 mm Installation height: 700 mm Drive concept: hydraulic Rapid traverse Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 160 mm/s Backgauge travel X-axis: 650 mm Backgauge speed X-axis: 500 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 154 mm Oil tank: 280 l Length: 5,750 mm Width: 2,500 mm Height: 4,000 mm Weight: 40,500 kg ONE SERVO MOTOR AND PUMP PER CYLINDER 4 Axes (Y1, Y2, X and R) CNC CONTROL SKY 22 - Full HD graphics display 21.5" with 2D and 3D visualization of the programmed workpiece - Intuitive touch-screen operation (easy drawing of bend contours using your finger) - User-friendly dialog programming, selectable in 2D or 3D mode - 2D and 3D bending process simulation - Automatic tool selection in 3D mode - Automatic calculation of flat length for sheet metal cutting - Automatic calculation of bending sequence - Graphical product and tool storage - Correction capability - USB ports and Ethernet connection for import, backup, and program export Fgodpfx Abeynmxnsreh - Windows operating system - Import support for IGES, STEP, DXF files Servo-motor driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning Upper tool 1010/A/75°, segmented and offset 4-V die block 60x60 2009 (V= 16, 22, 35, and 50 mm) Fiessler AKAS laser safety device mounted on upper beam Sheet support arms on linear guides Equipment according to CE regulations Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - Hydraulics run only during upper beam movement - Low energy consumption - Reduced noise emission - High speed PRICE FCA TURKEY Options: CNC control Delem DA-66 S CNC control Delem DA-69S 3D including PC software Profile-S with 3D file import capability

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €43,550 Leasing rate: €831.81 Bending length: 1,550 mm Max. bending capacity – mild steel: 12 mm Max. sheet thickness without pre-bending at D=5x top roller: 12 mm Max. sheet thickness without pre-bending at D=1.5x top roller: 10 mm Max. sheet thickness with pre-bending at D=5x top rollers: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roller: 8 mm Top roller diameter: 220 mm Lower roller diameter: 200 mm Side roller diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 3,600 kg 4-roll design Top roll driven by hydromotor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll lifting Hydraulic drop-end bearing 2 working speeds Overload protection Movable control panel Equipment according to CE regulations Fedpeynmx Isfx Abregh OPTIONS: Infinitely variable roll speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL ROLLING: Max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €73,200 Leasing rate: €1,383.48 Bending length: 2,050 mm Max. bending capacity – mild steel: 20 mm Max. sheet thickness without prebending at D=5x upper roll: 20 mm Max. sheet thickness without prebending at D=1.5x upper roll: 16 mm Max. sheet thickness with prebending at D=5x upper roll: 16 mm Max. sheet thickness with prebending at D=1.5x upper roll: 12 mm Upper roll diameter: 280 mm Lower roll diameter: 280 mm Side roll diameter: 220 mm Rolling speed: 1.5 / 5 m/min Motor power: 16.5 kW Length: 4,350 mm Width: 1,700 mm Height: 1,850 mm Weight: 8,550 kg 4 rolls Fully hydraulic drive for upper and lower rolls Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic release of upper roll Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Mobile control panel Equipment according to CE regulations Fedpfx Aboynmyloregh OPTIONS (PRICES ON REQUEST): Steplessly variable rolling speed Hydraulic side support Hydraulic top support NC control system IMPORTANT NOTES ON CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Stanje: novo Dobavni rok: cca. 10 tednov od naročila Država porekla: Turčija Cena: 13.400 € Lizinška rata: 257,28 € Dolžina upogibanja: 1550 mm Maks. zmogljivost upogibanja - konstrukcijsko jeklo: 3 mm Premer zgornjega valja: 110 mm Hitrost valjanja: 3 m/min Moč motorja: 2,2 kW Dolžina: 2700 mm Širina: 750 mm Višina: 1000 mm Teža: 1200 kg 3 valji Asimetrična razporeditev valjev – s predupogibanjem 2 pogonska valja z zavornim motorjem Ročna nastavitev stranskih valjev Zgornji valj z možnostjo nagiba naprej Gibanje naprej/nazaj Stožčasto valjanje z nagibom zadnjega valja Premični upravljalni pult Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI OPCIJE (CENE NA POVPRAŠEVANJE): Kaljeni valji Motorizirana nastavitev stranskih valjev Fgjdpsynmzvsfx Abrsh Digitalni prikaz položaja stranskih valjev

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €159,300 Leasing rate: €3,010.77 Pressing force: 320 t Bending length: 4,050 mm Axes: Y1 / Y2 / X and R axis Stroke: 365 mm Distance between uprights: 3,600 mm Throat depth in side frame: 410 mm Installation height: 630 mm Drive concept: hydraulic Rapid traverse Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 160 mm/s Backgauge travel X-axis: 650 mm Backgauge speed X-axis: 500 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Fgjdpfx Asynm Atebrjh Table width: 154 mm Length: 5,300 mm Width: 1,910 mm Height: 3,230 mm Weight: 20,100 kg ONE SERVOMOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2, X, and R) CNC CONTROL SKY 22 - Full HD graphics display 21.5" with 2D and 3D visualization of the programmed workpiece - Intuitive touch-screen operation (easy contour drawing with your finger) - Operator-friendly dialog-based programming in either 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of the blank length for sheet cutting - Automatic bending sequence calculation - Graphical product and tool memory - Correction capabilities - USB ports and Ethernet connection for import, backup, and program export - Operating system Windows - Import support for IGES, STEP, DXF files Backgauge with servo drive on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning Upper tool 1010/A/75°, split and goosenecked 4-V die block 60x60 2009 (V= 16, 22, 35, and 50 mm) Laser safety device Fiessler AKAS mounted on upper beam Sheet support arms on linear guide Equipment according to CE regulations Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - Hydraulics operate only during ram movement - Low energy consumption - Low noise emissions - High speed Options: Z1/Z2 axes CNC control Delem DA-66 S CNC control DELEM DA-69S 3D including PC software Profile-S with 3D file import capability

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €60,600 Leasing rate: €1,145.34 Bending length: 3,100 mm Max. bending capacity (mild steel): 10 mm Max. sheet thickness without pre-bending at D = 5x top roller: 10 mm Max. sheet thickness without pre-bending at D = 1.5x top roller: 8 mm Max. sheet thickness with pre-bending at D = 5x top roller: 8 mm Max. sheet thickness with pre-bending at D = 1.5x top roller: 6 mm Top roller diameter: 260 mm Bottom roller diameter: 260 mm Side roller diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 5,350 mm Width: 1,600 mm Height: 1,550 mm Weight: 7,685 kg 4 rollers Top roller driven by hydraulic motor and planetary gearbox, bottom rollers driven by gear drive and cardan shaft Hydraulic adjustment of bottom and side rollers Digital display for bottom and side roller positions Fgsdpfx Aoynm D Rjbreh Hardened rollers Cone bending device Hydraulic release of the top roller Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control console Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL BENDING: Maximum sheet thickness is 50% of the rated capacity Cone length must be a maximum of 30% or more than 60% of the roller length Hardened rollers are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €111,500 Leasing rate: €2,107.35 Bending length: 3,100 mm Max. bending capacity – mild steel: 20 mm Max. plate thickness without pre-bending (D=5x top roll): 20 mm Max. plate thickness without pre-bending (D=1.5x top roll): 16 mm Max. plate thickness with pre-bending (D=5x top roll): 16 mm Max. plate thickness with pre-bending (D=1.5x top roll): 12 mm Top roll diameter: 350 mm Lower roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 6,000 mm Width: 2,200 mm Height: 1,900 mm Weight: 15,000 kg 4-roll design Full hydraulic drive of top and bottom rolls Hydraulic adjustment of lower and side rolls Digital readout for lower and side roll positions Hardened rolls Conical bending device Hydraulic release of the top roll Hydraulic drop-end bearing 2 working speeds Fgsdoynm Ebjpfx Abreh Centralized lubrication Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The maximum plate thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Stanje novo Dobavni rok cca 12 tednov od naročila Država izvora Turčija Cena 27.800 € Leasing obrok 530,98 € Dolžina upogibanja 3030 mm Maks. upogibna zmogljivost - konstrukcijsko jeklo 4 mm Maks. debelina pločevine brez pred-upogibanja - konstrukcijsko jeklo 4 mm Maks. debelina pločevine s pred-upogibanjem - konstrukcijsko jeklo 2 mm Premer zgornjega valja 180 mm Moč motorja 4 kW Dolžina 4600 mm Širina 1120 mm Višina 1020 mm Teža 4250 kg 3 valji Fgsdpfx Aboynm Ezorsh Asimetrična razporeditev valjev - s pred-upogibanjem 2 gnana valja Motorizirano nastavljanje stranskega in pritiskalnega valja Digitalni prikaz položaja stranskega in pritiskalnega valja Zgornji valj se lahko izklopi naprej Tek naprej/nazaj Kaljeni valji Premična upravljalna plošča Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI (Simbolna slika)

Stanje: novo, Stanje: novo Dobavni rok: približno 12 tednov po naročilu Država izvora: Turčija Cena: 35.400 € Leasing obrok: 676,14 € Dolžina upogibanja: 3030 mm Največja zmogljivost upogibanja (konstrukcijsko jeklo): 6 mm Največja debelina pločevine brez upogibanja: 6 mm Največja debelina pločevine z upogibanjem: 4 mm Premer zgornjega valja: 220 mm Moč motorja: 5,5 kW Dolžina: 4750 mm Širina: 1200 mm Višina: 1150 mm Teža: 4920 kg 3 valji Asimetrična razporeditev valjev z pred-upogibanjem 2 pogonska valja Motorizirano nastavljanje stranskega in pritisnega valja Digitalni prikaz položaja stranskega in pritisnega valja Zgornji valj izklopljiv naprej Delovanje naprej/nazaj Pobrušeni valji Premična upravljalna konzola Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI (Simbolna fotografija) Fsdpfx Asynm E Ujbrjgh

Stanje: novo, Condition: new Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €98,600 Leasing rate: €1,863.54 Bending length: 3,100 mm Max. bending capacity – structural steel: 16 mm Max. plate thickness without pre-bending at D=5x top roller: 16 mm Max. plate thickness without pre-bending at D=3x top roller: 13 mm Max. plate thickness without pre-bending at D=1.5x top roller: 16 mm Max. plate thickness with pre-bending at D=5x top rollers: 14 mm Max. plate thickness with pre-bending at D=1.5x top roller: 12 mm Top roller diameter: 300 mm Bottom roller diameter: 300 mm Side roller diameter: 240 mm Max. opening: 50 mm Working height: 1,140 mm Motor power: 18.5 kW Length: 5,310 mm Width: 1,660 mm Height: 1,140 mm Weight: 11,100 kg 4 rollers PLC Fully hydraulic drive of top and bottom roller (from 30 mm bending capacity for all four rollers) via planetary gearbox Hydraulic side roller adjustment with electronic synchronization Hydraulic bottom roller adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rollers Cone bending device Hydraulic drop-end bearing Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment according to CE standards OPTIONS: Upper and side plate supports NC control IMPORTANT POINTS FOR CONICAL ROLLING: Max. plate thickness is 50% of nominal capacity Cone length may be max. 30% or must be more than 60% of the roller length Fgsdpfx Aoynm Hfebrjh Hardened rollers are recommended

Stanje: novo, Stanje: novo Dobavni rok: pribl. 10 tednov od naročila Država izvora: Turčija Cena: 7.200 € Leasing mesečna rata: 138,96 € Maks. debelina pločevine – konstrukcijsko jeklo: 4 mm Razdalja grla: 200 mm Dolžina valja: 300 mm Število orodij: 4 kos. Premer valjev: 126 mm Hitrost vrtenja: 10 obr/min Dolžina: 1.475 mm Fodpfxjynm Nge Abrogh Širina: 550 mm Višina: 1.200 mm Teža: 460 kg Samozavorni reduktorski motor Nožna pedala za delovanje naprej/nazaj Nastavljiv spodnji valj Jeklene osi z bronastimi ležaji 4 kompleti valjev Podnožje Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI Oprema skladno z zahtevami CE ALTERNATIVA (CENA NA POVPRAŠEVANJE): Različica HIBKS 4,0 z hidravličnim pomikom zgornjega valja

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €14,200 Leasing rate: €272.64 Saw frame: pivoting frame Saw blade dimensions: 4160 x 34 x 1.1 mm Blade speed: infinitely variable from 20 to 100 m/min Cutting capacity 0° – round: 320 mm Cutting capacity 0° – square: 320 mm Cutting capacity 0° – flat: 610 x 320 mm Cutting capacity 30° – round: 260 mm, square: 225 mm Cutting capacity 45° – round: 320 mm, square: 320 mm Cutting capacity 60° – round: 320 mm, square: 320 mm Working height: 740 mm Hydraulic motor: 0.37 kW Main motor: 2.2 kW Coolant pump motor: 0.12 kW Length: 2100 mm Width: 1200 mm Height: 1350 mm Weight: 1150 kg Cutting capacity 75° – round: 320 mm, square: 320 mm Chip brush Operator control panel Height adjustment via switch Hydromechanical blade tensioning Inverter Material limitation chute Coolant pump Saw blade Safety switch Gearbox Adjustable angle scale for mitre cuts 1.2 m roller conveyor HYDRAULIC LIFTING OF THE SAW FRAME Fedpfsynm Ntjx Abregh Operating manual in GERMAN or ENGLISH OPTIONS: Hydraulic top clamping vice Roller conveyors and saw blades

Stanje: novo, Condition: New Delivery time: approx. 14-16 weeks from order Country of origin: Turkey Price: €61,900 Leasing rate: €1,169.91 Saw frame: double column guide Saw blade dimensions: 6000 x 41 x 1.3 mm Blade speed: stepless 20-100 m/min Cutting capacity at 0° (round): 540 mm Cutting capacity at 0° (square): 540 mm Cutting capacity at 0° (flat): 670 x 540 mm Cutting capacity at 30° (round): 540 mm; (square): 540 mm Cutting capacity at 45° (round): 510 mm; (square): 510 mm Cutting capacity at 60° (round): 270 mm; (square): 250 mm Working height: 805 mm Fsdpfoynm Rqjx Abrsgh Hydraulic motor: 2.2 kW Main motor: 4 kW Coolant pump motor: 0.12 kW Length: 3,100 mm Width: 2,350 mm Height: 2,150 mm Weight: 3,800 kg NC control Double column guide with linear rails 3° cutting angle Chip brush Control panel Hydraulic feed vise Hydraulic vise Hydro-mechanical blade tension Inverter Optical height adjustment Proximity switch for blade slip detection Pressure adjustment Coolant pump Saw blade Safety switch Operating manual in GERMAN or ENGLISH OPTIONS: Hydraulic bundle clamping device Micro-spray system Laser cut-line indicator Roller conveyors and saw blades ALTERNATIVE: BMSO 540 CGS NC (with servo feed instead of hydraulic feed) €70,200

Stanje: novo, Stanje: novo Dobavni rok: približno 10 tednov od naročila Država izvora: Turčija Cena: 70.300 € Leasing obrok: 1.328,67 € Tlačna sila: 110 t Dolžina mize: 900 mm Širina mize: 540 mm Prehodna odprtina v mizi: 180 mm Hod: 14 - 114 mm Število hodov: 60 1/min Deska: 490x325 mm Nastavitev deske: 90 mm Iztok: 280 mm Motor: 7,5 kW Dolžina: 1.870 mm Širina: 1.320 mm Višina: 2.800 mm Teža: 5.600 kg 8-točkovno vodilo deske Sprednja zaščita s svetlobno zaveso Ročno nastavljanje deske Fsdpfxsynnbks Abrsgh Mehanska zaščita pred preobremenitvijo Samodejno mazanje Oprema v skladu s CE predpisi Navodila za uporabo v NEMŠČINI in ANGLEŠČINI

Stanje: novo, Stanje: novo Dobavni rok: cca 8 tednov od naročila Država izvora: Turčija Fjdpfx Abjynnfvsrjgh Cena: 28.390 € Leasing rata: 542,25 € Debelina pločevine - konstrukcijsko jeklo: 0,4 - 3 mm Maks. širina pločevine: 300 mm Maks. prečni prerez: 900 mm² Premer podajalnih valjev: 80 mm Podajalna hitrost: 75 m/min Pospešek podajanja: 10 m/s² Navor motorja: 10 Nm Stožčasto-čelni zobniški prenos WATTDRIVE (Izdelano v Avstriji) Pnevmatski sistem FESTO Servo pogon in krmiljenje SIEMENS 7'' barvni zaslon na dotik SIEMENS 2 pogonska valja Zunanji dajalnik položaja (enkoder) OPCIJA: Ročni volan in modul za daljinsko vzdrževanje Simlinx € 4.290,--

Stanje: novo, Stanje: novo Dobavni rok: približno 10 tednov od naročila Država izvora: Turčija Cena: 11.800 € Leasing obrok: 226,56 € Fgsdpfx Aeynngtsbrsh Dolžina upogibanja: 1.050 mm Maks. upogibna zmogljivost - konstrukcijsko jeklo: 5 mm Premer zgornjega valja: 130 mm Hitrost valjanja: 3,5 m/min Moč motorja: 2,2 kW Dolžina: 2.200 mm Širina: 750 mm Višina: 1.000 mm Teža: 1.200 kg 3 valji Asimetrična razporeditev valjev – s predupogibanjem 2 pogonska valja z zavorno-motorjem Ročno nastavljanje stranskih valjev Zgornji valj se nagiba naprej Delovanje naprej/nazaj Stožčasto upogibanje z nagibom zadnjega valja Premični upravljalni pult Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI MOŽNOSTI (CENE NA POVPRAŠEVANJE): utrjeni valji motorizirano nastavljanje stranskih valjev digitalni prikaz položaja stranskih valjev

Stanje: novo, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €10,800 Leasing rate: €207.36 Shaft diameter: 35 mm Upper roller diameter: 137 mm Lower roller diameter: 137 mm Driven rollers: 3 Motor power: 1.1 kW Speed: 7 m/min Flat bar vertical (cross-section / min. diameter): 35x8 mm / 300 mm Flat bar horizontal (cross-section / min. diameter): 50x12 mm / 400 mm Square steel (cross-section / min. diameter): 18x18 mm / 250 mm Round steel (cross-section / min. diameter): Ø22 mm / 200 mm Fsdpfx Abeynnhkorjgh Tube (cross-section / min. diameter): Ø40x1.5 mm / 500 mm Rectangular tube vertical (cross-section / min. diameter): 30x15x2.5 mm / 500 mm Square tube (cross-section / min. diameter): 25x25x2 mm / 450 mm Angle steel leg outside (cross-section / min. diameter): 35x35x5 mm / 400 mm Angle steel leg inside (cross-section / min. diameter): 30x30x4 mm / 550 mm Length: 1050 mm Width: 500 mm Height: 1250 mm Weight: 350 kg 3 driven rollers (with brake motor) Hardened and ground shafts Hydraulic adjustment of both lower rollers Usable both horizontally and vertically Standard roller set Foot pedal for forward and reverse operation Two digital displays Control panel Machine and equipment conform to CE regulations Operating manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES!

Stanje: novo, Condition: new Delivery time: approx. 4 months from order Country of origin: Turkey Price: €27,600 Leasing rate: €527.16 Saw frame: double-column guide Saw blade dimensions: 5750 x 41 x 1.3 mm Blade speed, stepless: 15 - 120 m/min Cutting capacity 0° round: 460 mm Cutting capacity 0° square: 460 mm Cutting capacity 0° flat: 520 x 460 mm Working height: 585 mm Hydraulic motor: 0.55 kW Motor: 4 kW Coolant pump motor: 0.12 kW Length: 3000 mm Width: 1200 mm Height: 1800 mm Weight: 1,650 kg Roller feed with manually adjustable stop with microswitch Piece counter Linear guide 41 mm saw blade Control panel Hydraulic vice Hydromechanical blade tensioning Fgjdpfxeynnhqs Abroh Gearbox designed for heavy-duty use Coolant system Mechanical upper clamping Pressure adjustment Inverter for stepless blade speed Roller conveyor 1.2 m Chip brush Optical height adjustment Operating instructions in GERMAN or ENGLISH OPTIONS: Roller conveyors and saw blades on request

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €83,800 Leasing rate: €1,583.82 Bending length: 2,550 mm Max. bending capacity - structural steel: 15 mm Max. sheet thickness without pre-bending at D=5x top roll: 15 mm Max. sheet thickness without pre-bending at D=3x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 12 mm Max. sheet thickness with pre-bending at D=5x top roll: 12 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 10 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 4,760 mm Width: 1,660 mm Height: 1,155 mm Weight: 8,950 kg 4 rolls PLC control Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment compliant with CE regulations OPTIONS: Upper and side sheet supports NC control system IMPORTANT NOTES FOR CONICAL ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length can be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended Fjdpfx Aeypbp Dsbrsgh

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €95,000 Leasing rate: €1,795.50 Bending length: 3,100 mm Max. bending capacity (mild steel): 13 mm Max. sheet thickness without pre-bending (mild steel): 12 mm Fgsdpeypbqhsfx Abreh Max. sheet thickness with pre-bending (mild steel): 8 mm Max. sheet thickness without pre-bending at D=5x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D=5x top roll: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 5,310 mm Width: 1,660 mm Height: 1,590 mm Weight: 10,050 kg 4 rolls PLC Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity on all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Cone bending device Hydraulic drop-end bearing Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in accordance with CE regulations OPTIONS: Top and side sheet support NC control IMPORTANT NOTES FOR CONE ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended