Gme Haco Stmu Ppes 30135 nakup rabljenega (4.610)

Stanje: rabljeno, Leto izdelave: 2016, obratovalne ure: 3.597 h, prevoženi kilometri: 66.228 km, vrsta goriva: dizel, lastna masa: 18.000 kg, Operating hours: 3,597, First registration: 23.06.2016, self-propelled Standard Basic Equipment: Fan Unit - Fan drive hydraulically powered via chassis-mounted, transmission-independent PTO (semi-hydrostatic drive) - Hydraulic fan drive - Hydraulic oil tank, 50 l - Engine compartment lined with soundproofing material - Fan exhaust air directed upwards through the front tank assembly - Hydraulic pump, single Sweeping Debris Container - Sweeping debris container (with rear door and screen) and water tank made of 1.4003 chrome steel - Engine compartment cladding normal steel - Sweeping debris container gross volume: 6.5 m³ - Sweeping container floor made of chrome-alloyed stainless steel, 1.4301 - Sweeping debris container tipping angle approx. 55 degrees - Waste chute made of chrome steel, 1.4003 - Observation flaps left and right - Dirty water drain 4", A-coupling - Air guide screen, manually foldable - 2 rotating beacons at rear on the sweeping container - Air shut-off valve on suction hose, pneumatically operated - Multi-stage safety prop, pneumatically operated - Marker lights on container rear, side marker lights - Integrated water tank - Preparation for rear suction hose boom or roof-mounted option - Side marker lights Sweeping Pick-up System - Wear-resistant coated pick-up - Coarse collection by tilting suction mouth - Suction hose diameter: 250 mm - Disc brushes, pushed - Hydraulic drive disc brushes, steel - Disc brushes, steel, 500 mm diameter pulled - Infinitely variable speed control for disc brushes - Two robust swiveling trailing wheels - Automatic lifting of sweeping assemblies during reverse travel - Work lights for the sweeping unit Roller Brush - Roller brush suspension, pulled - Brush length: 1,300 mm, brush diameter: 406 mm with synthetic bristles (chassis dependent) - Hydraulically driven roller brush - Swirl limiter curtain for roller brush unit Tsdpfx Ajfy Am Ueltja Water System - Water tank volume approx. 1,554 l - Water tank made of 1.4003 chrome steel with coating - Water level indicator in driver's cab - Water fill device, Storz C (2"), right side - Manual water fill device, right and left - Water pump, hydraulically driven - Automatic water stop when sweeping assemblies are raised - Spray water connector, 3/4", rear right - Water blow-out system - Electric water valves in driver's cab - 2-nozzle low-pressure spray bar at the front Instrument Cluster and Control Panel - Bucher instrument cluster, incl. 7" color display - Ergonomic control unit, mounted on driver's door, fitted with main functions - Display includes: water level indicator, operating hours, and rear axle load - Warning and control lights for rear axle load - Control unit for regulating broom contact pressure (broom relief), infinitely variable disc brush speed control - Electric valves for water system, operated in driver's cab - Operation of the debris container functions via cable remote control from the driver's cab, also operable externally - Operation of the air guide screen, rear right on the vehicle - Overload indicator for rear axle load, warning lamp in display (option)

Stanje: rabljeno, Leto izdelave: 2023, obratovalne ure: 893 h, moč: 62 kW (84,30 KM), lastna masa: 4.500 kg, Operating hours: 893, First registration: 29.09.2023 Sweeper Bucher C202 Euro 6C featuring VM engine, Euro 6C certified, equipped with integrated diesel particulate filter, SCR catalytic converter and AdBlue. Standard version with 2 side brushes, front steering (2-wheel steered), maximum speed 50 km/h. Equipment: - Right-hand drive - Four-wheel steering – offers high maneuverability and safety - RAL 9016 white - Swiveling leaf suction hose, 125 mm - Coarse dirt/leaf flap - Preparation for 3rd front brush and/or winter service equipment (right-hand drive) - Without front equipment triangle - Incl. work headlights - Additional mirror in cabin to improve blind spot visibility - Protective grid for cab floor - Heated exterior mirrors - Color reversing camera Todpfx Ajw Ehxxjltea - DAB+ radio with CD, USB, Bluetooth - Deluxe driver's seat with headrest, lumbar support, including seat heating - Fully integrated automatic climate control system - Electric battery isolator switch - LED beacon lights in front behind the cabin - LED warning strobe lights at front (2 pcs) - Manual water valves for brush arms - High-pressure system: 68 bar, 9 l/min with 10 m hose and hand lance - Fresh water level/loss indicator - Noise label: 99 dB Location: State Office for Fire...

Stanje: rabljeno, Leto izdelave: 2019, obratovalne ure: 3.394 h, lastna masa: 4.000 kg, Operating hours: 3,394, First registration: 16.09.2019 Maximum speed: 40 km/h - Permissible total weight: 4,000 kg Cabin: Sound-insulated, low-vibration mounted cabin with entry from right or left, right-hand drive, air-suspended driver's seat, co-driver seat, rotating beacon, reverse warning alarm, engine tachometer, heating with 2-stage fan, heated front windscreen with 2-stage intermittent wiper system, radio/SD, working lights, seatbelts for driver and co-driver. Floor windows with metal grille, CAN View System with 7" colour display and indication of all relevant data, integrated self-diagnosis system. Engine: VM engine D754 E6 (60D/14) 2,970 cm³, 4-cylinder, 62 kW/2,300 rpm, 270 Nm/1,350 rpm, common-rail. Exhaust system: DPF & DOC with SCR urea system, AdBlue tank 15 l Suspension: Fully suspended with coil springs and shock absorbers front and rear. Tyres: Front 6.50 R10 / Rear 225/75 R10 Brakes: Hydraulic dual-circuit brake plus hydrostatic rear brake, hydraulically actuated parking brake. Sweeper suction container: Container made of DIN 1.4003 stainless steel, tipping height 1.50 m, 45° tipping angle. High-performance blower with wear-resistant, self-cleaning impeller. Slide chute from container 200 mm. Brush: 850 mm front brush (poly) with hydraulic drive, adjustable up to 120 rpm, 1,440 mm sweeping width to either side. Brush ground pressure and lateral swing angle can be set independently via joystick. Frontal and lateral collision protection. Suction duct: Continuously height-adjustable suction duct on rigid wheels. Water tanks: Freshwater tank with 152 l and water recovery tank with 250 l. Paint finish: Cabin, side and rear covers, single-colour white; chassis, freshwater tanks and container in grey. Tool kit includes grease gun, spanner, screwdriver set. Special equipment: - Right-hand drive (standard) - All-wheel steering - Turning circle wall-to-wall: 4,600 mm - Air conditioning with automatic climate control - Deluxe driver's seat, heated with lumbar support - Upgraded radio with Bluetooth - Hands-free phone kit - Blind spot mirror - Heated reversing mirrors left/right - Reverse camera system with integrated colour monitor - Automatic central lubrication system (Interlube) - LED rotating beacon, foldable (instead of standard) - Airport beacon, strobe lights (CAA spec CAP 168) - Option to install 3rd brush Tjdpfetuzqpsx Altja - Mounting plate & high working lights, right-oriented Location: 54595 Prüm

Stanje: rabljeno, Leto izdelave: 2018, obratovalne ure: 5.690 h, prevoženi kilometri: 89.600 km, moč: 55 kW (74,78 KM), lastna masa: 15.000 kg, Operating hours: 5,690, First registration: 23/02/2018 Carrier vehicle: DB Atego 1324 #WDB96752620163901 Basic Equipment: VT 651 Exhaust Air Blower: Operating speed variable between 2,400 rpm and 3,500 rpm to suit the respective application. Driven by auxiliary engine via reduction gearbox and fluid coupling. Reduction gearbox ratio: 1.79:1 Disc Brush: Quick-release brush system with infinitely variable speed up to 200 rpm (controlled from the cab). Suction Nozzle: Cast aluminium suction nozzle with a 250mm inlet and tool-free adjustment. Sweeping Roller: Quick-release brush system with nominal rotation speed of 160 rpm. Dust Suppression System: Spray nozzles for dust suppression at the suction nozzle(s), disc brushes, and across the vehicle front. Pressadrain water squeeze-out system. Electrical System: 24 Volt. All external wiring harness connectors rated to vehicle standard IP67. Controls: Centre cab-mounted main control panel with Johnston Video Monitor (JVM) provides information on a wide range of sweeping functions and allows for download of recorded data. Up to four optional cameras can also be monitored on the JVM screen. A separate palm-rest controller includes controls for the main sweeping functions and is door-side mounted. Body and Hood: Body comprises hopper and integrated water tank, manufactured from high-performance stainless steel plate. Hood is lined with frequency-matched sound-damping material. The water tank features baffle plates and is filled via a type "A" hydrant filling device. A double, dry-run protected diaphragm pump runs continuously. Watertight rear door with double-lock system and drainage function. Two side access doors on the body. Insertable body floor as a transfer port for use as a street washer. Rear discharge channel, two rear rotating beacons with wire guard protection. Automatic, multi-positional body support mechanism and side-mounted storage cabinets are standard features. Special Features: - Custom paint LA1 2603 deep orange - Water recycling - High-pressure washing system - Hand suction hose - Brush tilt adjustment from the cab - Hand water valves in the cab Optional Equipment: - Side underrun protection, left - Battery box relocated - TÜV certification - Chassis programming - Tachograph inspection and sealing Todpfxsu Ay Tzj Altoa Location: 54595 Prüm

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 1.250 h, prevoženi kilometri: 27.235 km, lastna masa: 16.000 kg, Operating hours: 1250, First registration: 24.02.2023 Application: - Maximum permissible gross weight: 16 t Tjdsvt Iytopfx Altsa - Sweeper-ready configuration Main components: - Chassis height: MED (medium) - Standard cab - Wheelbase: 3350 mm - Euro 6 emission standard - Diesel engine, 6 cylinders, 7.7 L, 257 HP / 188 kW, 969 Nm - Exhaust and compression brake, 170 kW/231 HP - ZTO1006 gearbox, 6-speed manual, overdrive - Final drive ratio: 5.13 Equipment packages: - Manual roof hatch - Side sun visor, driver side - Manual air conditioning - Cruise control - DAB audio system, radio DAB/FM/AM, antenna, Bluetooth connectivity, USB, 2 speakers Chassis: - Front axle load (technical): max. 5.8 t - Rear axle load (technical): max. 10.9 t - AdBlue tank: 32 liters Wheels and tires: - Front tires: 285/70 R 19.5 – Goodyear, KMAX S - Rear tires: 285/70 R 19.5 – Goodyear, KMAX D Powertrain equipment: - High-mounted air intake, right side, mounted behind cab Cab interior: - Right-hand drive - Comfort driver’s seat, heated with integrated belt - Basic passenger seat - Single armrest, driver - Coat hook on rear wall - Collision warning system with emergency braking function (for stationary and moving objects) - Lane keep assist/lane departure warning - Immobilizer, transponder in key - Electric windows, both sides - Reversing alarm - Speed limiter: 90 km/h - Metal roof hatch - Steering wheel, height and reach adjustable Cab exterior: - Tinted windows - Rear cab wall window - Central locking with remote control - Heated and electrically adjustable rearview mirrors - Exterior sun visor - Headlamps with beam range adjustment - LED daytime running lights, "V Light" Dual-side debris collection Body with hydrostatic drive and hydraulic auxiliary drive with HGB2 transmission (V50h/V65h) Engine output: 256 HP / 188 kW (187.9 kW) Use: - Maximum permissible gross weight: 16 t - Sweeper-ready configuration - Diesel engine, 6 cylinders, 7.7 L, 969 Nm - Exhaust and compression brake, 170 kW/231 HP - Bluetooth telephone integration, USB, 2 speakers - Front axle load (technical) max. 5.8 t - Rear axle load (technical) max. 10.9 t - Collision warning system with emergency braking function (for stationary and moving objects) - Exterior sun visor - LED daytime running lights, "V Light" Standard basic equipment: - Hydrostatic transmission HGB2 - Max. 1400 Nm and approx. 340 HP - Chassis-mounted mechanical transfer gearbox with integrated hydrostatic unit for stepless speed control during sweeping operations - Road travel 0 – 85 km/h via standard gearbox (cruise control optional) This drive configuration allows stepless forward (1 – 40 km/h) and reverse (1 – 10 km/h) sweeping speed adjustment via the electronic accelerator pedal (Easy-Drive). - The suction performance can be independently adjusted from ECO to Max, regardless of driving speed. Sweeper body fuel tank capacity approx. 190 l - Hydraulic fan drive. Hydraulic oil tank: 50 l. Engine bay equipped with sound-dampening materials. Fan exhaust routed upwards through the body front section. Continuously electronic tur...

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 1.018 h, moč: 62 kW (84,30 KM), barva: bela, lastna masa: 3.500 kg, Delovne ure: 1018, Proizvajalec motorja: VM-Motor, Prva registracija: 28.09.2023_____Oprema: Pometalni stroj Bucher-Johnston CX 202 Euro 6CVM-Motor, certificiran po Euro 6 z integriranim filtrom za dizelske sajeSCR katalizator in AdBlue standardna izvedba2 stranski metli, sprednje krmiljenje (2-kolesno krmiljenje)Posebna oprema:Desno krmiljenje, RAL9016 belaBariera za grobe odpadke/listjeZaporni ventil - za povratno vodo iz zbiralnika pometenega materialaKlimatska naprava, brez FCKWveliko ogledalo za metle za boljši pregled nad pometalnim področjemdigitalni tahografZunanji ogledali, ogrevaniRadio DAB+ s CD (znamka Alpine, tip CDE-205DAB) mp3, front aux, USB, Bluetooth, mikrofonDeluxe voznikov sedež z vzglavnikom in ogrevanjem sedeža 50 km/hLED svetilka opozorilna pred kabinoročni vodni ventili za roke metleLokacija: ESO-Stadtservice Tsdpfx Aouqtflsltja

Stanje: rabljeno, Leto izdelave: 2016, obratovalne ure: 3.656 h, vrsta goriva: dizel, barva: bela, lastna masa: 4.000 kg, naslednji pregled (TÜV): 08/2020, velikost sprednje pnevmatike: 0%, velikost zadnje pnevmatike: 0%, Operating hours: 3,656, First registration: 22.03.2016, self-propelled Equipment: - Right-hand drive - All-wheel steering (turning circle diameter 3,760 mm) - Coarse dirt flap - Poly/steel brushes (instead of standard) - Suction nozzle with castor wheels (instead of standard) - Attachment plate: Preparation for third broom - Low water level indicator - Adjustable water valves on the front brushes - Deluxe driver's seat, heated with lumbar support - Upgraded radio with Bluetooth (hands-free for phone) Todpfjlz Iu Uox Altsa - Blind spot mirror - Heated rear-view mirrors left/right - Additional 99 dB(A) marking (TÜV-certified) - Rear-view camera system with integrated 7.0" color monitor - Folding yellow LED beacon (instead of standard) - High mounted work lights Location: 54595 Prüm

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 1.249 h, prevoženi kilometri: 9.200 km, lastna masa: 16.000 kg, Operating hours: 1249, First registration: 13.03.2023 Engine power: 256 HP / 188 kW (187.9 kW) Application: Maximum total weight 16 t - Sweeper preparation Main components: - Standard cab - Wheelbase 3350 mm - Euro 6 emission standard - Diesel engine 6 cyl. 7.7 l, 969 Nm - Exhaust and compression brake, 170 kW/231 HP - Gearbox ZTO1006, 6-speed manual OD - Final drive axle ratio 5.13 Equipment packages: - Manual roof hatch - Side sun visor, driver side - Manual air conditioning - Cruise Control (speed limiter) - Audio system DAB, Radio DAB/FM/AM, antenna, Bluetooth telephone connectivity, USB, 2 loudspeakers Chassis: - Maximum front axle load (technical) 5.8 t - Maximum rear axle load (technical) 10.9 t - AdBlue tank 32 liters Wheels and tires: - Front axle tires, 285/70 R 19.5 – Goodyear, KMAX S - Rear axle tires, 285/70 R 19.5 – Goodyear, KMAX D Drivetrain – Equipment: - High air intake, mounted on bracket right behind cab Cab – Interior: Tedpovacl Dofx Altsa - Right-hand drive - Comfort driver’s seat, heated, seat belt integrated - Basic passenger seat - One driver’s armrest - Coat hook on rear wall - Collision warning with emergency braking function (for stationary and moving targets) - Lane departure system/lane departure warning - Immobiliser, transponder in key - Electric windows both sides - Reversing alarm - Speed limiter 90 km/h - Metal roof hatch - Steering wheel adjustable in two directions Cab – Exterior: - Tinted windows - Window in rear cab wall - Central locking with remote control - Mirrors, heated and electrically adjustable - External sun visor - Headlights with beam range adjustment - LED daytime running lights, "V Light Standard basic equipment: Hydrostatic transmission HGB2, Max. 1400 Nm and approx. 340 HP. Built-in mechanical changeover gearbox with integrated hydrostat for stepless speed control in sweeping mode. Transport speed 0 - 85 km/h via standard gearbox (cruise control optional). This work drive allows stepless adjustment of sweeping speed forwards (1 - 40 km/h) and reverse (1 - 10 km/h) via an electronic accelerator pedal (Easy-Drive). Simultaneously, suction performance can be independently regulated between ECO and Max, regardless of driving speed. Fuel tank in sweeper body, capacity approx. 190 l. Hydraulic fan drive. Hydraulic oil tank 50 l, engine compartment lined with sound-absorbing material, fan exhaust upwards through the body front, stepless electronic turbine adjustment, single hydraulic pump. Sweeping debris container: Debris container (with tailgate and sieve) and water tank made of 1.4003 stainless steel. Debris container gross volume 6.5 m³, debris container floor made of alloyed stainless steel 1.4301. Debris container tipping angle approx. 55 degrees, dirt chute made of 1.4003 stainless steel, inspection flap right and left. Dirty water discharge via clamp hose and 2" drain cock, air-guide sieve manually foldable, 2 orange rotating beacons at rear of debris container, suction pipe flap outside on container, hydraulically operated, 4-stage safety support, pneumatically operated. Marker lights at the rear of the container, side marker lights. Sweeping unit:

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 2.539 h, moč: 118 kW (160,44 KM), barva: oranžna, lastna masa: 10.500 kg, Operating hours: 2,539, First registration: 06.03.2023_____Basic Equipment CityCat 5006 Tjdoi Haqhopfx Altoa Driver's Cab: Comfortable, hydro-mount suspended, sound-insulated cab. Front windshield made from heat-insulating, curved, low-reflection safety glass. Two sliding windows in each door. Multi-level heating fan. Sun visor. Windscreen wiper with washer system. Air-suspended driver's seat and sprung passenger seat, both individually adjustable. Tilt and height adjustable steering column. Clearly arranged and ergonomically positioned controls and monitoring instruments with a 7'' color display. Visual and acoustic warning system for temperature and fluid level monitoring. Visual diagnostic system with intuitive design. Steering: Hydrostatic four-wheel steering with hydraulic servo assistance. Axles: Rear axle as a steering drive axle with differential. Front axle with coil springs and shock absorbers. Hydraulics: The latest electronic control concept enables fuel- and noise-optimized control of the diesel engine for a hydrostatic drive over the entire speed range, without loss of power. Brakes: Hydraulic dual-circuit braking system with hydraulic servo assistance. Disc brakes front and rear. Hydraulic spring-loaded parking brake on rear axle. 4 brake calipers at the front and 2 at the rear. Sweeping debris pickup: Suction pickup principle, with trailing, stainless steel suction mouth in front of the axle, together with side brushes hydraulically adjustable laterally by 400 mm. Infinitely variable high-performance suction blower. Debris container: Container volume 5.6 m³, hydraulic tipping and closing. Dumping height 930 mm Dumping height (high-tip) 1550 mm (optional) Dumping width 1700 mm Dumping angle 51° Water system: Water tank approx. 880 l. One water pump for water nozzles. Brooms: 2 brushes left and right Ø 900 mm, infinitely variable speed 0-150 rpm with collision protection. Special equipment: - Standard color RAL 2011 orange - Hydraulic suction pipe flap - Debris screen lifting device for raising and lowering the debris screen in the debris container by hydraulic hand pump - Easyclean, quick cleaning system for cleaning the debris container side walls, blower, recuperation and debris screen - 3rd front brush, reinforced design with linear displacement, tilt adjustment in both directions, adjustable contact pressure, greater reach, larger sweeping area - Leaf suction hose mounted on the side, length 3.5 m, Ø 160 mm, can be mounted on both sides - Fully integrated, CFC-free air conditioning - Wide-angle and main mirrors heated and electrically adjustable - Additional side brush mirror right - Rear view camera and suction mouth camera - Cruise control for improved work ergonomics, increased productivity - Deluxe driver's seat ISRI with headrest, weight adjustment via control valve - Rotating beacon in LED version on cab. Mounted with flexible bracket, can fold down upon obstruction - Rotating beacon in LED version at rear on debris container. With flexible bracket, can fold down upon obstruction - Work lights, left & right brushes, LED - Suction mouth LED headlights - Joystick swap front/side brushes enables switching of joysticks for front and side brushes - Water connection with rinse gun

Stanje: novo, Leto izdelave: 2025, Do you need an efficient and proven bending machine that will serve you for years? See what our satisfied customers write on our website! Prod Masz stands for reliability. Click and check our online offer. Three-fold segmented folding machine SGR-650/1.0mm Technical specifications: - Max. working width: 650 mm - Max. bending angle: 160 degrees - Bending beam: 15 mm - Max. sheet thickness (steel): 1.0 mm, aluminium: 1.2 mm - Weight: 60 kg - Segment jaw widths: 30, 40, 50, 60, 70, and 100 mm - All three beams are fitted with segmented jaws (full segmentation) - Angle scale - Throat depth: 50 mm Total length: 1 m Height: 45 cm Price: 1,900 EUR Delivery time: weekly Payment in cash upon delivery Delivery costs: 180 EUR Todpfx Ajh Atafoltsa We look forward to hearing from you! Invoices are issued with 0% VAT as intra-community supply or plus 19% VAT.

Stanje: zelo dobro (rabljeno), Offered for sale is a used Krupp-Esch cone crusher (gyratory granulator), Tsdpfjwy U Suex Altja Model KG1: Feed size: 5 – 50 mm, 36 kW, Weight: 6 t. With pre-screening via a double-deck screen measuring 0.80 x 2.00 m. In very good condition.

Leto izdelave: 2024, stanje: zelo dobro (rabljeno), ZLC serisi soğuk kamaralı basınçlı döküm makineleri, 12 yılı aşkın tecrübeye dayanılarak geliştirilmiştir ve otomotiv, elektrik işleri, elektrikli ekipmanlar, oyuncaklar, ev aletleri, bilgisayarlar gibi alanlarda çinko veya pirinç alaşımlı ürünlerin üretiminde geniş çapta kullanılmaktadır. Bu seri soğuk kamaralı basınçlı döküm makineleri, yüksek kaliteli ithal hidrolik bileşenler, son derece sağlam makine gövdesi, çekme alaşımlı çelik çubuk ve sektöre özel bilgisayar ile donatılmıştır. Ayrıca gelişmiş tasarım, hassas üretim, hızlı tepki, kolay kullanım, güvenilirlik ve emniyet ile düşük enerji tüketimi gibi avantajlara sahiptir. Makine; kontrol sistemi, hidrolik sistem, yağlama sistemi, soğutma sistemi, kalıp kilitleme sistemi, enjeksiyon sistemi, makine şasesi, emniyet kapısı vb. bölümlerden oluşmaktadır. Ana fonksiyonu, ayrı bir fırından belirli miktarda eriyik metal çekmek ve bunu piston kovanına dökmektir. Alaşımlı eriyik metal, yüksek basınç altında tamamen eridiğinde, eriyik metal plakanın üzerine yerleştirilmiş olan kalıp modeline enjekte edilir ve kalıp kapanır; yüksek basınç, sıvı alaşım tamamen katılaşana kadar korunur. Tjdoy A Hnyepfx Altja

Stanje: novo, Leto izdelave: 2025, Delivery every Monday and Tuesday - RELIABLE! Triple-segment bending machine with foot control EU production Folding bench with foot operation Segmented clamping beam, bottom beam, and bending beam - Precision-ground bending segments - Segments with triple guidance for easy and quick adjustment - Full-featured folding bench with foot control - Piano-type inserts in the upper, lower, and bending beams provide numerous bending possibilities - Upper beam, bottom beam, and bending beam all segmented (piano segments) - Segments are movable and removable - Precision-ground bending segments made from extremely tough and hard special alloy steel - Bending beam is effortless to operate due to a heavy-duty compression spring/damper system - Heavy-duty, robust construction for decades of operation - Easy, convenient opening and closing of the top beam Technical specifications: - Max. working width: 1,400 mm - Max. bending angle: 160 degrees Tedpec I T Txjfx Altsa - Max. sheet thickness (steel): 1.5 mm - Weight: 295 kg - Segment jaw widths: 30, 40, 50, 60, 70, and 100 mm - All three beams equipped with segment jaws (fully segmented) - Stop for preset bending angles - Degree scale - Clearance: 100 mm Transport rollers included. Nationwide shipping (Germany): €180 SCRIBING TEMPLATE FREE OF CHARGE! We issue invoices with 0% VAT (intra-community supply) as well as with 19% VAT. We look forward to your inquiry!

Stanje: novo, Leto izdelave: 2025, Delivery every Monday and Tuesday! Reliable! 3-segment segmented bending machine with foot operation SGR-1000mm/1.5mm EU production Folding bench with foot operation Segmented upper beam, lower beam, and bending beam - Precision-ground bending segments - Segments with triple guidance for quick and easy adjustment - Folding machine with complete foot operation - Piano-type inserts in the upper, lower, and bending beam provide a wide range of bending possibilities Boxes and special profiles with opposing bends can be easily made with this model Tedpfxocvbu As Altoa - Our bending machine is a well-proportioned all-welded construction with foot-operated upper beam clamping, significantly simplifying and speeding up operations since both hands remain free for positioning and aligning material. - The easily and quickly adjustable bending angle stop ensures safe, repeatable production of the required bending angle, even in large batch production - Upper beam, lower beam, and bending beam are all segmented (piano type) - Segments are movable and removable - Precision-ground bending segments made of extremely tough and hard special alloyed steel - The bending beam is extremely easy to operate thanks to a robust compression spring/damper - Heavy-duty and robust construction for decades of operation - Convenient opening and closing of the upper beam Technical data: - Max. working width: 1000mm - Maximum bending angle: 160 degrees - Max. sheet thickness (steel): 1.5mm - Weight: 235 kg - Segment jaw widths: 30, 40, 50, 60, 70, and 100mm - All three beams equipped with segment jaws (fully segmented) - Stop for preset bending angles - Degree scale - Clearance: 100mm Price: 4,700 Euro Castor wheels 1 set included SCRIBING TEMPLATE FREE! Delivery time: every week Cash payment upon delivery Delivery cost: 180 Euro within Germany Please contact us :) We look forward to your inquiry! Invoices are issued either with 0% VAT as an intra-community delivery or plus 19% VAT.

Stanje: novo, Leto izdelave: 2025, Punctual delivery, reliable equipment! Manual swivel bending machine folding bench sheet metal bending machine with segments Prod Masz stands for reliability. Click and check our online offer. 3-part segmented folding bench SGR-650/1.0mm Technical specifications: - Max. working width: 650mm - Max. bending angle: 160 degrees - Bending beam: 15mm - Max. sheet thickness (steel): 1.0mm, aluminum: 1.2mm - Weight: 60 kg - Segment jaw widths: 30, 40, 50, 60, 70, and 100mm - All three beams equipped with segmented jaws (full segmentation) - Degree scale - Throat depth: 50mm Tjdpfx Aloh H Dk Rotja Total length: 1 m Height: 45 cm Price: 1,900 Euros Delivery time: every week Cash payment upon delivery Delivery costs: 180 Euros We look forward to your inquiry! Invoices are issued with 0% VAT as intra-community supply or plus 19% VAT.

Stanje: novo, Leto izdelave: 2025, 3-segment folding machine with foot operation EU production Folding bench with foot operation Segmented upper beam, lower beam, and bending beam - Precision-ground bending segments - Segments with triple guidance for easy and quick adjustment - Folding machine with foot operation, complete - Numerous bending options thanks to segment inserts in the upper, lower, and bending beams Boxes and special profiles with opposing bends can be fabricated with ease on this model - Our folding machine is a well-dimensioned, fully-welded construction with foot-operated upper beam positioning. This significantly streamlines and speeds up workflow, as both hands remain free for material insertion and alignment. - The easily and quickly adjustable bending angle stop ensures accurate and highly repeatable production of the required bending angle, even in large series production - Upper beam, lower beam, and bending beam all fully segmented (piano-type) - Segments are adjustable and removable - Precision-ground bending segments manufactured from extremely tough and hard special alloy steel - Bending beam is effortless to operate, equipped with heavy-duty pressure spring/spring damper - Heavy-duty and robust design for decades of continuous operation - Convenient opening and closing of the upper beam Technical data: - Max. working width: 1,250 mm - Max. bending angle: 160 degrees - Max. sheet thickness (steel): 1.5 mm - Weight: 265 kg - Segment widths: 30, 40, 50, 60, 70 and 100 mm - All three beams equipped with segmented tooling (fully segmented) - Adjustable stop for preset bending angles - Angle scale - Material clearance: 100 mm Price: €5,400 Swivel castors included Delivery time: Every week on Monday/Tuesday Cash on delivery Delivery charge: €180 This type of folding bench is also available in a length of 1,400 mm. Tedpfxocudl Ns Altsa We look forward to your enquiry!

Stanje: novo, Leto izdelave: 2025, delovna širina: 1.250 mm, Kot upogiba (maks.): 160 °, najv. debelina jeklene pločevine: 1 mm, maks. debelina aluminijaste pločevine: 12 mm, najv. debelina bakrene pločevine: 12 mm, skupna masa: 100 kg, skupna dolžina: 1.500 mm, It is a lightweight yet robust segment folding bench with a working width of 125 cm. Direct from Prod Masz ‼️ Segment folding machine, length 1250mm Lightweight (despite high versatility) at 105 kg, 100% segmented Easy to transport Segments can be changed without the need for tools, etc. Plus several other convenient features Need reliable equipment? Have special requirements? Contact us‼️ We deliver professionally and with maximum durability. Prod Masz stands for reliability. 3-way segmented folding bench SGR-1250/1.0mm Technical Data: - Max. working width: 1250mm - Max. bending angle: 160 degrees - Bending beam: 15mm - Max. sheet thickness (steel): 1.0mm, aluminium: 1.2mm - Weight: 105 kg - Segment width: 30, 40, 50, 60, 70 and 100mm - All three beams are equipped with segmented jaws (fully segmented) - Degree scale - Throat depth: 55mm Total length: 1.6m Height: 45cm Price: 3200 Euro Tedpecgmf Rsfx Altea Delivery: weekly Cash payment upon delivery Delivery cost: 180 Euro within Germany We look forward to hearing from you! Invoices are issued with 0% VAT for intra-community delivery or plus 19% VAT.

Leto izdelave: 1994, stanje: pripravljen za uporabo (rabljen), Control: USK-sensocon, on-site inspection is possible. Tsdpjqa A Rzsfx Altea

Stanje: novo, Leto izdelave: 2025, PROD-MASZ sheet metal bending machines, folding benches, and guillotine shears utilize the precision of CNC technology. This range is designed for industrial use, ensuring every product stands out with exceptional durability and resilience—regardless of operating conditions. The specifications comply with strict technical standards and rigorous CE regulations, guaranteeing fulfillment of EU requirements as clear proof of the equipment’s quality. Additionally, the entire range is covered by a 12-month warranty. Versatile, powerful, heavy-duty, and extremely robust segmented bending brake—this is no ordinary folding machine, but a much stronger and sturdier construction. A segmented bending brake is characterized by full segmentation across the entire working length of 1.40 meters. Both upper and lower segments can be removed quickly and easily, and the bending beam is divided into segments. The bending angle ranges from 0 to 155 degrees. Clamping is done via foot pedal so your hands are free to position the sheet—open and close using the foot. The bending beam is equipped with two gas pressure springs, making operation exceptionally easy. A practical segmental toolbox is located at the rear of the machine. Technical data: - Maximum working width: 1400 mm - Maximum bending angle: 160 degrees - Maximum sheet thickness (steel): 1.5 mm - Weight: 300 kg - Segment jaw widths: 30, 40, 50, 60, 70, and 100 mm - All three beams are fitted with segment jaws (full segmentation) - Adjustable stop for preset bending angles - Degree scale Tedpoc Swhyefx Altsa Price: €5,700 Swivel castors included Delivery: Weekly Payment: Cash on delivery Delivery cost: €180 We look forward to hearing from you!

Leto izdelave: 2020, stanje: novo, Height-adjustable turning device under load for the machining or assembly of turbine rotors, rollers, or shafts. Load capacity: 20,000 kg Tsdpfxefw Afkj Altsa Stroke: 400 mm Roller diameter: 350 mm Workpiece diameter (supported): D180 mm – D900 mm Roller material: TEXMAT-500

Leto izdelave: 2022, stanje: novo, Lifting capacity: 10,000 kg Rotational speed: 0.03–1.6 rpm Faceplate diameter: 1,500 mm, extendable to 2,500 mm Welding current transmission: 800 A Tedpfxefxgp Ue Altja

Leto izdelave: 2022, stanje: novo, Height-adjustable L-manipulator Tsdpfx Ajh Td Thjltoa Load capacity: 500 kg Stroke: 640 mm, faceplate height min. 480 mm, max. 1,110 mm Swivel range: +/-185° Faceplate diameter: 800 mm Welding current: 400 A Faceplate torque: 900 Nm Swivel arm torque: 900 Nm Overall length: 2,495 mm Height: 1,855 mm Width: 900 mm The turntable is operated via a handheld remote control with the following functions: • Raise arm • Lower arm • Swivel arm right • Swivel arm left • Potentiometer for stepless speed adjustment of the faceplate The faceplate is actuated using a two-pedal foot switch with the following functions: • Rotate faceplate right • Rotate faceplate left

Leto izdelave: 2022, stanje: novo, Height-adjustable rotary tilt table Load capacity: 500 kg Lift: 1,015 mm, faceplate height min. 345 mm, max. tilt angle 120° Faceplate diameter: 800 mm Tjdsh Tfbzspfx Altja Welding current: 400 A Faceplate torque: 1,300 Nm Total length: 2,365 mm Height (housing): 1,030 mm The rotary tilt table is controlled via push-buttons on the machine housing with the following functions: • Raise arm • Lower arm • Potentiometer for stepless SPEED adjustment of the faceplate A dual-pedal foot switch is provided for actuation of the faceplate with the following functions: • Rotate faceplate RIGHT • Rotate faceplate LEFT

Stanje: novo, Leto izdelave: 2023, Manipulator with hydraulic height adjustment, faceplate with clamping slots, and handheld remote control. Height (faceplate horizontal): approx. 670 – 2,400 mm Faceplate swivel range: approx. ±360° Faceplate dimensions: Ø1,200 mm x 40 mm, 6 clamping slots Main axis speed: approx. 2.0 rpm (other options possible) Tjdsnqzt Aspfx Altea Main axis torque: approx. 13,000 Nm Faceplate speed: approx. 0.2–2 rpm Faceplate torque: approx. 10,000 Nm

Leto izdelave: 2022, stanje: novo, Manipulator with two height-adjustable arms and faceplate. Load capacity: 1,500 kg Lift: 800 mm Todpfsfnku Hex Altoa Slewing range: 300° Faceplate diameter: 1,000 mm Welding current: 600 A