Głowica Frezarska Ø80 Mm Walter Sk40 Głowica Frezarska Walter Sk40 – Xtra-Tec nakup rabljenega (83.792)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. Iiedpfx Aemhhx Iol Nsa The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany Ijdpemhhyaofx Al Nsia - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. Iisdjh Ek Dajpfx Al Nja The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. Iisdpfx Asmhh Anjl Nsa We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Iiodpfxjmhhf Ss Al Nsa Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Screw system in hot-dip galvanized design: Pickup price: Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section: 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright equipped with 3 bolted cantilever arms, usable depth 1,200 mm, standard (equals 4 levels) Iiodpfx Aomhhl Hsl Nsa Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Mounting hardware included (ground anchors not included) Supplied with assembly instructions and C4 load capacity labels according to DIN standards

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever racking system, powder-coated (RAL 7016 Anthracite): Scope of delivery: - 4 uprights, height 4,200 mm with base part, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm - Longitudinal and diagonal bracing for 1,300 mm upright spacing (system length 4,000 mm) - Fastening materials (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered; extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface coated in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg Iodpfxjmidyfo Al Neia - Base section and cantilever arms with usable depth of 1,200 mm - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms as standard (= 4 storage levels) - Load capacity per arm: 730 kg - Includes longitudinal and diagonal braces for 1,300 mm upright spacing - System length: 4,000 mm - Fastening materials included (floor anchors not included) - Supplied with assembly instructions and C4 load plates according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance delivery notice. The material is sensibly packed for easy unloading. Delivery is possible approximately 1–2 weeks after order receipt. Please note: For outdoor installation, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, and suitable for anchoring, and must be able to take the imposed loads. Customers are responsible for verifying soil condition, load-bearing capacity, and obtaining any necessary official permits. Uprights must be anchored to the floor by the customer; wall mounting is neither necessary nor recommended. According to trade association guidelines, uprights should project at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) Iedpfxomkixwo Al Njia - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Iiodpfx Alemhh Dts Noa Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Goods are packed for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.

Stanje: rabljeno, Leto izdelave: 2002, Walter Helitronic Mini Power Production 5-osni CNC brusilnik za orodje in rezkanje Leto: 2000 Univerzalni brusilnik za orodje in rezkanje (CNC voden) Opis: Primeren za izdelavo in ponovno brušenje vseh kovinskih in lesnoobdelovalnih orodij. Tehnične specifikacije: • Pomik v vzdolžni smeri (X-os) 350 mm, • Pomik v navpični smeri (Y-os) 200 mm, • Pomik v prečni smeri (Z-os) 470 mm, • Zasuk vrtljive mize (C-os) +/- 200°, • Glava za vpenjanje ISO 50, višina v osi (z/delovno mizo) 145 / 190 mm, • Maks. premer obdelovanca 100 mm • Maks. dolžina obdelovanca 270 mm • Maks. premer brusnega koluta 150 mm • Največja moč 11,5 kW, motor brusilnega vretena 9 kW, hitrost 0 - 9500 obr/min, Iiedpfeyymmkox Al Nsa • Priključna moč cca 25 kW (460 voltov 3f / 60 Hz), • Dimenzije š x d x v = 2600 x 2550 x 1970 mm, teža cca 3950 kg,

Stanje: rabljeno, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.480 mm, NEMŠKI TRGOVEC ponuja: BDF platforma 7,45 m s 4 vstavnimi nosilci na sredini. Kranabilna, z vpenjalnimi obroči. Nakladalna površina: 7300 mm x 2480 mm. Veliko menjalnih nadgradenj in prikolic na zalogi! ##### PROSIMO, POKLIČITE – BREZ E-POŠTE! DOSTAVA MOŽNA PO CELI NEMČIJI! MEPO-UPORABNA VOZILA DOBAVLJA OD LETA 1983! OGLED SAMO PO DOGOVORU! ##### Iisdeyzwywspfx Al Nea

Stanje: dober (rabljeno), Leto izdelave: 2004, Demag Ergotech Extra 500-200 (2004) Iiedsyyzuvepfx Al Nea

Stanje: dober (rabljeno), Leto izdelave: 2003, Demag Ergotech Extra 800-430 (2003) Iisdoyyzi Hopfx Al Noa

Stanje: rabljeno, Različni konzolni regali 7x regal: Dimenzije: 6.125 x 2.400 x 3.000 mm Teža pribl.: 8.000 kg 3x regal: Dimenzije: 5.650 x 2.400 x 3.000 mm Teža pribl.: 7.380 kg Iedpfxoyrq Nlo Al Neia Na voljo so statični izračuni !! Slika 1 prikazuje regal v sestavljenem stanju !!

Stanje: zelo dobro (rabljeno), Naprodaj komplet držal za orodje ATORN Germany – visoka kakovost, premium znamka Hahn+Kolb. Tehnični podatki: • Proizvajalec: ATORN • Model: 20723200 • Standard: DIN 69871 SK40-1/10-100 • Dolžina: 100 mm • V kompletu: več kosov, nekateri z nameščenimi svedri (vidno na fotografijah) Stanje: zelo dobro, praktično skladiščeni kosi. Uporabljeni samo testno, brez delovne obrabe. Primerni za CNC obdelovalne centre in rezkalne stroje. - Cena za kos. Iisdpfx Aow Ulrasl Nja

Stanje: zelo dobro (rabljeno), Professional height gauge from the renowned Japanese brand Mitutoyo. The device is designed for precise height measurements and scribing on surface plates. Model with a measuring range up to 600 mm, equipped with a dial indicator and precise micrometric adjustment, providing highly accurate dimension control. The robust construction and high manufacturing quality typical of Mitutoyo ensure repeatable and reliable measurements. — Technical data: • Manufacturer: Mitutoyo (Japan) • Measuring range: 600 mm • Mitutoyo dial indicator • Indicator graduation: 2.5 µm • Micrometric fine adjustment • Stable, heavy base • Clear measurement scale — Applications: • Height measurement of workpieces • Scribing on granite surface plates • Dimensional inspection • Workshops, toolrooms, quality control departments Ijdjy Dirqepfx Al Noia — Condition: Used, in good technical condition. Shows normal signs of use. Sold exactly as shown in the photos. — Equipment: • Mitutoyo height gauge • Dial indicator • Micrometric adjustment mechanism

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Precision Lathe RML 1640V – Comprehensive Equipment Description: This machine is ideally suited for toolmaking, training workshops, maintenance, as well as for precise single-part and small-batch production. Equipment: - 3-axis digital readout - 3-jaw chuck with internal and external jaws - Coolant system - Removable gap bridge - Hardened and ground bed guideways - Fixed steady rest - Live center - Multifix quick-change tool post - Slip clutch for feed overload protection - Foot brake - Machine lamp - Bed stop with micrometer adjustment - Toolmaker's precision according to DIN 8605 - Two-tone paintwork: Blue (RAL 5012) / Grey (RAL 7032) Iodoyudwbepfx Al Njia - CE conformity - German operating manual and spare parts list Technical Data: Swing over bed: 410 mm Swing over cross slide: 264 mm Swing in gap: 533 mm Distance between centers: 1000 mm Bed width: 260 mm Spindle bore: 52.5 mm Spindle mount: D1-6 DIN 55029 Cross slide travel: 220 mm Spindle speeds: 20 – 2500 rpm Number of speed ranges: 2 Speed range 1: 20 – 400 rpm Speed range 2: 400 – 2500 rpm Motor power: 3.7 kW Tailstock quill diameter: 52 mm Tailstock quill travel: 152 mm Quill taper: MK 4 Machine weight: 1400 kg Thread cutting ranges: Metric: (39) 0.2 – 14 mm Whitworth: (45) 2 – 72 TPI Diametral Pitch: (21) 8 – 44 DP Module: (18) 0.3 – 3.5 MOD Miscellaneous: Inspection by appointment possible. The machine is immediately ready for operation.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 300 mm, merilno območje osi Y: 200 mm, merilno območje os Z: 200 mm, Oprema: Na voljo je tipska ploščica, Vključno s krmilno konzolo, krmilnim računalnikom in programsko opremo, kot je prikazano na slikah. EXW – osebni prevzem na lokaciji Podjetje kupca mora podpisati kupoprodajno pogodbo in razkriti/potrditi svoje dejanske upravičence. Poleg tega mora podpisnik opraviti identifikacijski postopek Postident. Iisdpfx Aljyam S Se Nja

Stanje: rabljeno, Centre height 100 mm Machine weight approx. 30 kg Dimensions 300 x 250 x 400 mm - Factory no.: 2802 - Direct indexing via index plate - Degree indexing via vernier scale - Indirect indexing via index plate Iodpfxswntzkj Al Njia

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, Certificirano po DGUV do: 04/2027, vrsta vhodnega toka: trifazni, Doja Tec model: BK2-VA z regulatorjem hitrosti izvedba iz nerjavečega jekla za prekrivanje izdelkov priključek 400 V, 16 A CEE vtičnica + stisnjen zrak Mere: 3000 x 970 x 1380 mm (ŠxGxV) rabljen stroj Možnost: Dostava do pekarne Iisdpfjyy Sk Ijx Al Nja

Stanje: novo, Na prodaj visokokakovostna kompenzacijska (fleksibilna) cev BOA, izdelana iz nerjavečega jekla, namenjena industrijski uporabi. 📋 Tehnični podatki: Proizvajalec: BOA Tip: SP20 (valovita cev) Nazivni premer: DN65 Dolžina: 2000 mm Delovni tlak: PN16 Priključki: prirobnični Material: nerjaveče jeklo (INOX) Konstrukcija: valovita cev + jeklena pletenica Označevanje: DIN / VdS ⚙️ Uporaba: industrijske instalacije vodne, plinske in parne inštalacije kompenzacija vibracij in toplotnih raztezkov zaščita črpalk, ventilov in cevovodov 📦 Stanje: Novo – skladiščeno blago (NOS) Možne manjše sledi skladiščenja (vidno na slikah). Neuporabljen izdelek, popolnoma delujoč. ✅ Prednosti: visoka odpornost na temperaturo in tlak zelo dobra fleksibilnost Iedjyzi Hvopfx Al Njia trpežna konstrukcija iz nerjavečega jekla zmanjšanje vibracij in hrupa 📸 V kompletu: Točno to, kar je na slikah.

Stanje: novo, Na prodajo visokokakovostna kompenzacijska (fleksibilna) cev znamke BOA, izdelana iz nerjavnega jekla, namenjena za industrijsko rabo. 📋 Tehnični podatki: Proizvajalec: BOA Tip: SP20 (valovita cev z obročki) Nazivni premer: DN50 Isdpfx Aeyzixlel Noia Dolžina: 1100 mm Delovni tlak: PN16 Priključki: prirobnični Material: nerjavno jeklo (INOX) Konstrukcija: valovita cev + jeklena pletenica Oznake: DIN / VdS ⚙️ Uporaba: industrijske instalacije vodovodne in plinske instalacije ogrevalni in parni sistemi kompenzacija vibracij in toplotnih raztezkov zaščita črpalk in armature 📦 Stanje: Novo – skladiščno blago (NOS) Možne manjše sledi skladiščenja (vidne na fotografijah). Izdelek popolnoma brezhiben, neuporabljen. ✅ Prednosti: visoka odpornost na temperaturo in tlak zelo dobra fleksibilnost trdna konstrukcija iz nerjavnega jekla zmanjševanje vibracij in hrupa v sistemu 📸 V kompletu: Točno to, kar je na fotografijah.

Stanje: novo, For sale: high-quality steel compensator (compensating hose / Ringwellschlauch) from the renowned brand BOA, specifically designed for industrial applications. This component is used for: - compensating for thermal expansion - damping vibrations and noise - reducing stress in piping systems Manufactured from stainless steel 1.4404 (INOX), it is ideal for demanding environments such as water, gas, industrial, and process installations. ⚙️ Technical Data Manufacturer: BOA Nominal diameter: DN125 Length: 1500 mm Pressure rating: PN16 Material: stainless steel 1.4404 (INOX) Type: compensating hose / steel compensator Connections: flanged (flange type) Construction: corrugated hose with stainless steel braid Standards: ISO 10380 / DIN Iiedpfx Aljyzirxo Nja 📏 Dimensions Internal diameter approx.: 125 mm Total length approx.: 1500 mm ✅ Advantages ✔ Renowned manufacturer BOA ✔ Excellent corrosion resistance ✔ Long service life ✔ Vibration and stress damping ✔ Flexible design ✔ Quick installation (flanged) 📦 Included in delivery 1x DN125 compensator (as shown in the pictures)

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 7846 Iodpfeylbm Iex Al Noia TEHNIČNI PODATKI - min. širina srednjega prizme po razrezu: 85 mm - minimalna dolžina rezanega hloda: 1300 mm - maksimalni premer rezanega hloda: 350 mm - premer vretena: 70 mm - premer krožne žage: 500 mm - največje število krožnih žag na zgornji in spodnji osi: po 4 kosi - 2 hitrostni stopnji podajanja + naprej/nazaj + na frekvenčnem pretvorniku - moč motorja pogona spodnje osi: 22,5 kW - moč motorja pogona zgornje osi: 18,5 kW - moč motorja podajalnega pogona: 1,1 kW - dolžina tira: 4.450 mm - premer odsesovalnega izhoda: 3x200 mm - 3 vrste zaskočnih elementov - mere (D/Š/V): 6040x1500x1850 mm - teža pribl.: 1.250 kg PREDNOSTI – poljska proizvodnja, znamka WALTER – tehnična dokumentacija DTR – rabljeni stroj, v zelo dobrem stanju Cena brez DDV: 36.900 PLN Cena brez DDV: 8.790 EUR Cena brez DDV preračunana po tečaju 4,2 PLN/EUR (ob večjih nihanjih tečaja se lahko cena spremeni)

Leto izdelave: 1963, stanje: pripravljen za uporabo (rabljen), Maksimalna preoblikovalna sila: 80t, priključna moč: 3,5kW, vrsta toka: 3 faze, frekvenca: 50Hz, obratovalna napetost: 380V, krmilna napetost: 24V, nazivni tok stroja: 10A, nominalni tok hitre varovalke: 25A, počasne: 15A, teža: 1,79t. Z dokumentacijo, brez dodatne opreme ali rezervnih delov. Redno vzdrževan, stroj ima napako, nastavitev hitrosti ne deluje več popolnoma. Možen je ogled na lokaciji. Iedpfxsy A Smbe Al Nsia