Fliegl Tps 118 Plateau 6,2M Für Holz nakup rabljenega (5.448)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902029406, lastna masa: 5.800 kg, največja dovoljena obremenitev: 29.200 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2021, naslednji pregled (TÜV): 06/2027, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.790 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5", barva: srebrn, The photos are archive images; the vehicle may still be in use! Chassis: Semi-Trailer for Haulage Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, coil well approx. 8,040 mm long, 6 coil supports (coil pockets internal dimensions 82 x 52 mm), coil well cover with multiplex boards and steel crossmembers, 2 slit coil covers for the coil well, each approx. 293 mm wide, unladen weight approx. 13 kg per cover, outer frame slightly sloped with "Load-Lock profile" for attaching tie-down straps. Note: To attach straps in combination with side walls, the side walls must be opened! 9 pairs of recessed lashing rings, each rated at 5 tons, in the area of the coil well. 24-ton two-speed landing gear, single side operation, with straight lower part, without compensating slide. Note: Free landing gear foot clearance, or free rear swing radius approx. 1,930 mm, without supports. Retractable ladder at the rear, door retainers on sides, 2 wheel chocks with holder, aluminium side underrun guard, holder mounted transversely and on the chassis main beam for supporting aluminium planks, rear underrun protection in aluminium, half-shell fenders with anti-spray flaps compliant with EU regulations, rear impact protection, 1 plastic toolbox, 2 pairs of stanchion pockets integrated in the outer frame, approx. 72 x 42 mm internal dimensions in positions 1 and 2 as per old Fliegl stanchion data sheet, as with AU 19219. 2 stanchion pockets centrally embedded in the floor, approx. 72 x 42 mm internal dimensions on positions 1 and 2 as per old Fliegl stanchion data sheet, as with AU 192198. Note: Stanchion pockets / plug-in stanchions are not designed for stand-alone load securing of long materials, pipes, etc. without lashing. Axles & Suspension SAF disc brake axles with 430 mm disc diameter, "axle/chassis laser-measured" for reduced tyre wear and fuel consumption. Axle spacing offset 1410/1310 mm (combined transport), up to 44-ton total combination weight. Air suspension, without lift axle. The photos are archive images; the vehicle may still be in use! Ndodpfxjwhp A De Am Hsa

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902026742, lastna masa: 6.300 kg, največja dovoljena obremenitev: 28.700 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2020, naslednji pregled (TÜV): 08/2027, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.000 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R19,5", barva: črn, Pozor: Slike so arhivske. Vozilo je morda v uporabi! #Podvozje Prikolica za prevoz blaga Ploščad prikolice z zamenljivim 2-palčnim kraljem Pritrdilna plošča za jeklenke, dolžina ca. 7.040 mm 6 nosilcev za jeklenke (notranje dimenzije: 82 x 52 mm) Pokrov za jeklenke s sitotiskanimi ploščami in jeklenimi nosilci Zunanji okvir rahlo nagnjen z „Load-Lock profilom“ za pritrditev zategovalnih trakov 24-tonska dvotočna dvižna naprava, upravljanje z ene strani, z okroglim spodnjim delom in ravno priključno ploščo, z nastavljivo dvigom Opomba: Svobodni kot opore ali svobodni radij gibanja navzdol nazaj ca. 1930 mm Izvlečna lestev na zadnji strani, stranski varovalnik vrat 2 podstavka s pritrdilnim sistemom Stranski zaščitni rob, aluminijast Zaščitni spodnji rob, pocinkano jeklo 6 četrtokroglih blatnikov pred prvo osjo in za vsako osjo, z zaščitnimi zložljivimi plati za preprečevanje brizganja za vsako osjo Zaščitni odbijač na zadnji strani Nedpeztqd Defx Am Hsda Stranski odbijač za palete, robustna izvedba, dvostransko pritrjen, ca. 15 - 20 mm visok, z možnostjo pritrditve na vsakih 200 mm, višina nakladanja se zmanjša za ca. 15- 20 mm Nosilec rezervnega kolesa za 1 kolo z nastavkom za pritrditev kolesa Rezervno kolo, proizvajalec je enak osnovni pnevmatiki Jekleno platišče Plastična orodjarna škatla, z predalom in vložkom, š=650 / v=520 / g=670 mm, zapiranje z obeskom #Osi + vzmetenje SAF osi z disčnimi zavorami, „Osno podvozje merjeno z laserjem“, zmanjšanje obrabe pnevmatik in porabe goriva Zračno vzmetenje, prva os je avtomatska dvižna os, vključno s prisilnim spuščanjem in pomočjo pri speljevanju, upravljanje „3-krat pritisnite zavoro“ (pomoč pri speljevanju je funkcionalna do preseženja obremenitve osi za 30 % in do hitrosti največ 25 km/h) #Zavorni sistem Dvovodna zračna zavorni sistem, barvno označene cevi za lažje vzdrževanje Zavore s pomnilnikom (Federspeicher-Feststellbremse) 2 vtičnice za priključitev, ki se ne morejo zamenjati, spredaj EBS, elektronski zavorni sistem z vtičnico EBS spredaj Sistem stabilnosti vozila, zaznavanje obremenitve osi preko signala EBS-Canbus #Kolesa in pnevmatike 6 x 435/50 R19,5" 6 x jeklena platišča, tovarniško srebrna barva #Elektrika 24 Volt, večkomorna luči z LED 2 beli/rdeči luči za označevanje obrisa spredaj, LED 2 x 7-polna in 1 x 15-polna vtičnica, ki se ne morejo zamenjati, spredaj #Dno Sitotiskane plošče, debelina ca. 30 mm, za visoko točkovno obremenitev, do največ 5.600 kg obremenitve osi #Prednja stena / okvirovi spredaj 2.580 mm visoka Okvirovi, jekleni, v volumenski izvedbi #Zadnja stena / okvirovi zadaj Okvirovi zadaj, jekleni, do spodnjega roba strehe, pritrdilni sistem za ponjavo z okroglimi cevemi in zatezovalnikom ponjave Mehansko podaljšanje zadnjih okvirov za ca. 400 mm na vsaki strani za nakladanje in razkladanje. Zadnja vrata, streha, stranske ponjave in srednji okvirovi morajo biti odprti. Zadnja vrata, 2-krila z 2 notranjimi vrtljivimi zapahami Fliegl „I-Lock“ integrirani zapah vrat #Streha Fliegl "Blitz" - pomična streha Dvižna streha zadaj, z možnostjo premikanja strehe od zadaj proti spredaj L-strešni nosilec za avtomobilsko industrijo Streha ni elastična, ne upogiba se EcoLift - dvižna streha za ca. 380 mm, dvostransko, z oporo s plinskim blažilnikom 3 vozne nastavitve spredaj: notranja višina spredaj ca. 2900 mm / 2950 mm / 3000 mm Optimalni odvodnik za dež na zadnji strani #Država registracije / oznake Potrdilo o preskusu po standardu EG 2007/46 Potrdilo o varnosti tovor po standardu EN 12642 XL

Stanje: novo, Galvanized Pallet Racks for Outdoor Use Specifications: - Height: approx. 450 cm - Depth: approx. 110 cm - Length: approx. 11.20 meters - Load Capacity: 3,000 kg per compartment - Uprights galvanized - Beams 270 x 14 x 5 cm, type T30 - Beams galvanized - New BLT / PR45 FVZ - Manufactured in Europe & tested in accordance with current DIN EN 15512 standards. - 100% quality at the best price. Rack configuration: Ndsdpezwnc Sjfx Am Hea - 05 x Uprights approx. 450 cm x 110 cm, pre-assembled - 16 x Beams approx. 270 x 14 x 5 cm, T30 - 32 x Safety pins - 32 x Safety bolts M8 x 20 incl. nut - Levels: ground + 2 - 36 pallet spaces incl. ground level -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €2,450 net plus statutory VAT. You will receive an invoice showing the VAT separately. Transport: Delivery can be arranged through our partner forwarding agent on request, with costs depending on the postal code. Assembly: Our trained personnel are happy to professionally assemble or disassemble your warehouse equipment as needed. Our recommendation: Let us know your requirements... We are happy to support you in realizing your projects, from planning to ordering to installation. Customer note: When fitting the safety pins/bolts, holes that may be clogged due to galvanizing might need to be redrilled. Unfortunately, this cannot always be avoided with high-quality galvanizing. If you have any questions, please do not hesitate to contact us.

Stanje: novo, Hot-dip Galvanized Pallet Racks for Outdoor Use Specifications: - Height: approx. 450 cm - Depth: approx. 110 cm - Length: approx. 19.60 running meters - Load capacity: 3,000 kg per bay - Uprights: hot-dip galvanized - Beams: 270 x 14 x 5 cm, T30 - Beams: hot-dip galvanized Ndsdpszwnc Esfx Am Hea - New BLT / PR45 FVZ product - Manufactured in Europe & tested according to current DIN EN 15512 standard. - 100% quality at the best price. Rack includes: - 08 x Uprights, approx. 450 cm x 110 cm, pre-assembled - 28 x Beams, approx. 270 x 14 x 5 cm, T30 - 56 x Safety pins - 56 x Safety bolts M8 x 20 incl. nuts - Levels: Ground + 2 - 63 pallet spaces including ground level. -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €4,100 net plus applicable VAT You will receive an invoice with VAT shown separately. Transport: Delivery is available upon request via our partnered freight forwarder. Costs depend on the destination postal code. Installation: Our trained staff are available, upon request, to professionally install and dismantle your warehouse equipment. Our recommendation: Let us know your requirements... We are happy to support you with your projects, from planning and ordering to installation. Customer note: During installation, holes clogged by the hot-dip galvanization may need to be re-drilled for safety pins/bolts. Unfortunately, this cannot be completely avoided with high-quality hot-dip galvanization. If you have any questions, please let us know.

Stanje: novo, PALLET RACKING, GALVANIZED FOR OUTDOOR USE Pallet racking hot-dip galvanized for outdoor installation Specifications: - Height: approx. 450 cm Ndedpfxjzwncxe Am Hoa - Depth: approx. 110 cm - Length: approx. 16.80 linear metres - Load capacity: 3000 kg per bay - Uprights hot-dip galvanized - Beams: 270 x 14 x 5 cm, T30 - Beams hot-dip galvanized - New BLT / PR45 HDG - Manufactured in Europe & tested in accordance with current DIN EN 15512 standard - 100% quality at the best price Rack includes: - 7 uprights, approx. 450 cm x 110 cm, pre-assembled - 24 beams, approx. 270 x 14 x 5 cm, T30 - 48 locking pins - 48 locking bolts M8 x 20 incl. nut - Levels: ground + 2 - 54 pallet spaces including floor positions -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €3,550 net plus legally applicable VAT You will receive an invoice with VAT shown separately. Transport: Delivery is available by arrangement via our partner forwarding company; costs depend on the postal code. Assembly: Our trained staff is available to assist with professional assembly and disassembly of your equipment as needed. Our recommendation: Let us know your requirements... We are happy to assist you— from planning to ordering through installation. Customer information: When installing the locking pins/bolts, it may be necessary to re-drill holes that have been clogged due to the hot-dip galvanizing process. Unfortunately, even with high-quality hot-dip galvanizing, this cannot be completely avoided. If you have any questions, please feel free to contact us.

Stanje: novo, Galvanised Pallet Racking for Outdoor Use Specifications: - Height: approx. 450 cm - Depth: approx. 110 cm - Length: approx. 100.16 linear metres - Load capacity: 3,000 kg per bay - Uprights hot-dip galvanised - Beams 270 x 14 x 5 cm, T30 - Beams hot-dip galvanised - Brand new BLT / PR45 HDG - Manufactured in Europe & tested to the current DIN EN 15512 standard. - 100% quality at the best price. Racking set consists of: - 37 x uprights, approx. 450 cm x 110 cm, pre-assembled. - 144 x beams, approx. 270 x 14 x 5 cm, T30. - 288 x safety pins. - 288 x safety bolts M8 x 20 incl. nuts. - Levels: floor + 2 - 324 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €19,900 net Plus legally applicable VAT. You will receive an invoice showing the VAT separately. Transport: Delivery is carried out upon request by our partner forwarding agent; costs depend on postcode. Assembly: Our trained personnel are at your disposal for professional assembly and disassembly of your warehouse equipment if required. Our recommendation: Let us know your requirements... We are happy to support you in the realisation of your projects, from planning to ordering and installation. Customer note: Nedpfezwncrsx Am Hsda When installing the safety pins/bolts, holes that have become blocked due to galvanisation may need to be redrilled. This unfortunately cannot be completely ruled out with high-quality hot-dip galvanising. If you have any questions, please feel free to contact us.

Stanje: novo, Hot-dip Galvanized Pallet Racking for Outdoor Use Specifications: - Height: approx. 450 cm - Depth: approx. 110 cm - Length: approx. 14 linear meters - Load capacity: 3,000 kg per bay - Frames hot-dip galvanized - Beams: 270 x 14 x 5 cm, T30 - Beams hot-dip galvanized - Brand new BLT / PR45 HDG - Manufactured in Europe & tested according to the latest DIN EN 15512 standard. - 100% quality at the best price. Rack consists of: - 6 x frames approx. 450 cm x 110 cm, pre-assembled - 20 x beams approx. 270 x 14 x 5 cm, T30 - 40 x locking pins - 40 x safety bolts M8 x 20 incl. nuts - Levels: floor + 2 - 45 pallet spaces including floor locations -- AVAILABLE IMMEDIATELY IN MULTIPLE QUANTITIES -- Price: €2,990.00 net plus statutory VAT. You will receive an invoice with VAT shown separately. Transport: Delivery is available upon request via our partner forwarding company, costs depend on postal code. Installation: Our trained staff can professionally assemble and disassemble your warehouse systems upon request. Our Recommendation: Let us know your requirements... Njdpfx Ajzwncfjm Heda We are happy to assist you with your projects, from planning and ordering to installation. Customer Notice: When installing the locking pins/safety bolts, holes that may be blocked by the hot-dip galvanizing may need to be re-drilled. Unfortunately, this cannot be entirely avoided with high-quality hot-dip galvanizing. If you have any questions, please do not hesitate to contact us.

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), Type of adhesive: PUR adhesive, glue application system: cartridge-based, max. edge thickness: 25mm, max. workpiece thickness: 60mm, feed rate: 16 m/min, min. workpiece length: 140mm, min. workpiece width: 60mm. Includes various spare parts and return conveyor Ligmatec. Documentation available. On-site inspection possible. Nsdpfxougmw Ej Am Heda

Stanje: novo, prosta razpetina: 2.700 mm, skupna dolžina: 2.780 mm, V paketu je vključeno: 01x varnostna naprava za preprečevanje premika, nova Tip: univerzalna primerna za širino ogrodja: 2.700 mm carinska številka: 73066192 Njdpfszu Andjx Am Hsda sestavljeno iz: 01 x pravokotna cev, II. kakovost (nova) barva materiala: RAL 5010, modra mere: 50x40x2,0 mm teža: 2,64 kg | tekoči meter premer luknje: 9 mm dolžina cevi: 2.780 mm razdalja med sredinama: 2.740 mm 02x kotnik, nov barva materiala: pocinkana izvedba: nosilna naprava mere profila: 155 x 120 mm glava: 120 x 40 mm previs: 75 mm izvedba: 90 stopinj odprtina za kvadratno cev: 51 x 51 mm debelina materiala: 3,00 mm teža / kos: 0,460 kg vključno: 04 x vijaki, M8 x 20 mm 04 x matice, M8 04 x podložke, M8 02 x vijaki, M6 02 x matice 02 x podložke Po želji vam lahko na zahtevo ponudimo tudi druge naslednje dolžine: (za širino ogrodja:) 1.350 mm = 18,00 € + 19 % DDV 1.800 mm = 23,00 € + 19 % DDV 1.900 mm = 25,00 € + 19 % DDV 2.000 mm = 26,00 € + 19 % DDV 2.100 mm = 27,00 € + 19 % DDV 2.200 mm = 28,00 € + 19 % DDV 2.300 mm = 29,00 € + 19 % DDV 2.400 mm = 31,00 € + 19 % DDV 2.500 mm = 32,00 € + 19 % DDV 2.600 mm = 33,00 € + 19 % DDV 2.800 mm = 36,00 € + 19 % DDV 2.900 mm = 37,00 € + 19 % DDV 3.000 mm = 38,00 € + 19 % DDV 3.100 mm = 39,00 € + 19 % DDV Splošne informacije o izdelku: Ta izdelek je na voljo samo za osebni prevzem. Dodatni stroški prevoza ali pošiljanja tega izdelka se obračunajo posebej, glede na kraj dostave oziroma obseg dostave, in jih lahko povprašate pri nas.

Stanje: dober (rabljeno), V obsegu dobave je vključeno: 1x nosilec za mrežo zadnje stene, rabljen Barva materiala: pocinkan Notranja oznaka: različica 1 Diagonala: približno 410 mm Skupna širina: približno 90 mm Previs: približno 225 mm Debelina materiala: približno 3,00 mm Teža/kos: 0,71 kg 2 podolgovati luknji: 50 x 9 mm (Š x V) Višina: 30 mm Ndedpfxszuyr Ho Am Hea Splošne informacije o izdelku: Ta izdelek je na voljo samo za osebni prevzem. Morebiten dodatni transport ali pošiljanje tega izdelka je povezano z dodatnimi stroški, ki jih lahko povprašate pri nas glede na kraj dostave oziroma obseg dostave.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, Prevožena razdalja: 312.764 m numerično nastavljiv vpenjalni sistem vhodna zračna miza razpršilnik za protilepilno tekočino agregat za predhodno frezanje z diamantnimi rezili podajalnik robnih trakov iz zvitkov ali trakov postaja za nanašanje lepila s sistemom GlueJet ali laserskim sistemom L-Tronic Možnost nanašanja PUR lepila 4 pritiskalne valje s pnevmatično nastavitvijo pritiska razpršilnik za drsno tekočino na rob dvomotorna enota za natančno obrezovanje s pnevmatično nastavitvijo kota enota za frezanje odvečnega roba od zgoraj in od spodaj enota za profilno frezanje roba z numerično nastavitvijo ravna brusilna glava profilna brusilna glava – dva profila razpršilnik za čistilno tekočino polirni diski s pnevmatičnim nastavljanjem polirni disk za rob s pnevmatičnim nastavljanjem hitrost podajanja, brezstopenjsko nastavljiva od 10 do 25 m/min avtomatsko mazanje verige podajanja okvirna podpora najmanjša dolžina obdelovanca: 140 mm Nodeztkfbspfx Am Heda debelina obdelovanca: 8–60 mm najmanjša širina obdelovanca: 60 mm leto proizvodnje: 2016

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, številka stroja/vozila: 101-335, Funkcionalnost: popolnoma funkcionalen, Stroj bo na voljo v začetku oktobra 2026. Stroj si lahko stranka ogleda in preizkusi. Debelina obdelovanca: 8 – 60 mm Minimalna dolžina obdelovanca: 160 mm Hitrost podajanja: 10 m/min - izvlečna podpora za obdelovance - tlačna mostovna enota, upravljana s PLC - 1888 upravljalna plošča PPC 231 U+E - 1801 agregat za faziranje, vključno z 2 fazirnimi rezili 70x64x30 - 1903 popolnoma avtomatski sistem za podajanje robov - GJ 301 sistem za nanašanje lepila, vključno s tipalom in držalom za kartuše EVA in PUR - 1912-3 tiskarska enota, pnevmatska - 1918 rezalna enota s pnevmatskim nagibom 0 – 12°, upravljana s PLC - 1827 agregat za rezanje, pnevmatski, 4 kosi, upravljan s PLC - 1832 agregat za profilno rezanje (Auriga SPS) - 1929 agregat za radijsko glajenje, 2 kosa, upravljan s PLC - 1964 agregat za plosko glajenje - 1856 razdelilno sredstvo spredaj, čistilno sredstvo zadaj, razpršilno - 1940 agregat za nanos - Celotna dolžina: 4930 mm Ndedpfxezg Upwj Am Hea - Teža: približno 1430 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Prodajam popolnoma opremljen stroj za obdelavo robov Holz-Her Streamer 1057 XL, leto izdelave 2019: Konfiguracija: Ndedpfx Aszr Rwhjm Hea Vhodni opornik, nastavljiv ročno Rezalniki za utore, nastavljivi ročno Lepilo za robove: EVA ali PUR Cona za pritisk materiala, nastavljiva ročno Krožne žage, nastavljive pnevmatsko Rezalniki za zaobljene robove, zgornji in spodnji, nastavljivi ročno Okrogla enota, 1 motor, nastavljiva ročno Rezalnik za zaobljene robove R2, nastavljiv pnevmatsko (komplet R1 je vključen) Površinski rezalnik R2, nastavljiv pnevmatsko Polirne krtače, zgornja in spodnja Brizgalna glava, spredaj in zadaj Nadzorna plošča Višina obdelave, nastavljiva ročno Višina materiala 8–60 mm Debelina materiala robov 0,4–8 mm Hitrost podajanja 10 m/min Skupna dolžina, vključno s podajalno ploščo 4200 mm V odličnem stanju, popolnoma delujoč! Vključno z vso dokumentacijo in certifikatom CE. Na voljo takoj.

Stanje: novo, Leto izdelave: 2021, Rešetkasta tla/ police za paletne regale Podatki: - 3-delna, pocinkana, za prostor 270 x 110 cm (99 € neto) - 4-delna, pocinkana, za prostor 360 x 110 cm (132 € neto) - Novo blago na zalogi - Nosilnost: 1000 kg na rešetko pri enakomerno porazdeljeni obremenitvi —VEČKRAT NA VOLJO!!— Cena: 99,00 € neto + zakonsko določeni DDV Prejmete račun z obračunanim DDV. Naše priporočilo: Sporočite nam vaše potrebe… Z veseljem vam pomagamo pri izvedbi vaših projektov, od načrtovanja do naročila in montaže. Dostava po dogovoru po ugodni ceni. Njdpfx Aezwb Nlem Hjda

Stanje: rabljeno, Leto izdelave: 2014, obratovalne ure: 11.517 h, skupna višina: 2.880 mm, skupna dolžina: 10.000 mm, skupna širina: 2.700 mm, Barva: Bela Lastna teža: 6.000 kg - Letnik: 2014 - Dokumentacija na voljo: Ne - Potrdilo CE: Ne - Serijska številka: 070614/B/1-407 - Delovni čas: 11517 - Število vreten za obdelavo [kos]: 1 - Vreteno za obdelavo 1: Nedpfx Amex E Uk Uo Hsda - Število nadzorovanih osi [kos]: 4 - Nazivna moč glavnega motorja [kW]: 10 - Opremljeno z osjo C: Da - Vrsta mize za obdelavo: Ploščata miza - Vrtalno orodje na voljo: Da - Moč motorja [kW]: 3,6 - Horizontalna vretena za vrtanje [kos]: 6 - Vertikalna vretena za vrtanje [kos]: 18 - Število pozicij menjalnika orodij [kos]: 12 - Sistem/Programska oprema: TWINCAT - Varnostna funkcija: Varnostna ograja, varnostna preproga - Vakuumska črpalka na voljo: Da - Število [kos]: 2 - Znamka: Becker - Letnik: 2023 - Nazivna moč glavnega motorja [kW]: 18,5 - Prostornina [m³/h]: 600 - Podtlak [bar]: 250 - Brez olja: Da - CNC-dokumentacija na voljo: USB-ključ - Dolžina mize [mm]: 5150 - Širina mize [mm]: 1600 - Delovni obseg X [mm]: 7220 - Delovni obseg Y [mm]: 1580 - Delovni obseg osi Z [mm]: 180 - Napetost [V]: 400 - Dimenzije za transport: 10000 mm x 2700 mm x 2880 mm (d x š x v) - Transportna teža [kg]: 6000 kg Finančne informacije DDV: Navedena cena je brez DDV. DDV/davčni sistem: DDV je odbitljiv za podjetja. Dobava in odkup je možen kadar koli za vse izdelke iz industrijskega sektorja. Yorick Diebels

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, HOLZ-HER EVOLUTION 7405 (2021) – Kot nov! Samo 202 delovnih ur. Na prodaj je vertikalni CNC obdelovalni center HOLZ-HER EVOLUTION 7405. Odlično stanje, skoraj nerabljen, popolnoma operativen. Nedpfxozutd No Am Hsda Glavne specifikacije: - Leto izdelave: 2021 - Število aktivnih ur obdelave (aktivni pomik): SAMO 202 ur! - Skupno število ur delovanja stroja: 1.860 ur - Serijska številka: 1195/2-109 - Izdelano v Avstriji (CE) Funkcije in programska oprema: - HOLZ-HER CAMPUS / HOPS aktiv / Betternest - Avtomatski sistem za vpenjanje plošč brez vakuuma - Celovito obdelovanje vseh štirih strani, vrtanje in žlebovi - Kompaktna vertikalna zasnova (površina manjša od 5 m²)

Stanje: rabljeno, Leto izdelave: 2017, Direct numerical control (NC HOPS) with Campus software Working area X-axis: 3400 mm Working area Y-axis: 1600 mm Working area Z-axis: 300 mm Worktable with 6 adjustable rails No. 3 suction cups per work rail for securing the workpiece No. 1 electro-spindle, 5 axes, 10 kW, with automatic tool changer, cone type HSK F63 Njdpfowwiybsx Am Hsda Drilling head with 24 spindles as follows: - No. 12 vertical spindles, Y-axis - No. 6 vertical spindles, X-axis - No. 4 horizontal spindles, Y-axis - No. 2 horizontal spindles, X-axis Automatic tool change system with 18 positions - located at the rear of the machine Front guard and safety system with mats and safety nets Automatic lubrication system Air conditioning for control cabinet No. 1 vacuum pump

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: MH-FJ-2_1, Our demonstration model VOGEL MH-FJ-2 carton sealing machine features a side drive belt system. Within the specified range, the machine automatically adjusts to the respective carton size. Ndjdpfx Ajzr Htxem Hsa Carton formats: Length: 150 – ∞ mm Width: 140 – 480 mm Height: 120 – 480 mm Technical Specifications: Length: 1,150 mm Width: 1,005 mm Weight: 250 kg Mains voltage: 220 V Air supply: 5 kg/cm² CE mark IMPORTANT: An external compressed air supply is required to operate the machine and is not included in the scope of delivery. Our MH-FJ-2 carton sealer has been specially developed for variable carton formats. Thanks to pneumatic adjustment for height and width, continuously changing carton formats can be processed quickly and easily without manual intervention. The machine adapts instantly to the different formats. Two side and two top conveyor belts ensure your cartons are safely conveyed through the sealer. The top flaps of the cartons are folded down manually before feeding them into the machine. This machine is designed for adhesive tapes with a 76 mm core diameter and 50 mm width. We recommend using machine rolls with more tape per roll (compared to hand rolls) so you can operate longer without needing to change the tape. Both PP and PVC tapes as well as environmentally friendly paper tapes can be used. The taping units can be easily removed for changing tape rolls. This also enables the machine to be used for sealing only the top of the cartons, for example for auto-bottom cartons. Of course, this machine also carries the CE mark. A customer-supplied compressed air connection is required for operation. Accessories: For our VOGEL carton sealer range, we offer castors, infeed and outfeed tables, and roller conveyors.

Leto izdelave: 2026, stanje: novo, Our KVK 1A is an almost identical sister model to the KVK 2 (MA), meaning it is a semi-automatic stretch wrapper with a turntable. In comparison to the KVK 2 MA, it is equipped with a recess that allows for ground-level loading with a manual pallet truck. The only operations that must still be performed manually on this wrapper are attaching and cutting the film. Weighing 700 kg, this model is also designed for professional use and has a load capacity of up to 1,500 kg. The 1A features a 1,500 mm turntable and, as standard, can wrap pallets up to 2,400 mm in height. Both turntable and film carriage speeds are adjustable, and the very finely adjustable electromagnetic brake is controlled via potentiometer, allowing you to tailor the automated wrapping process perfectly to your product. Automatic pallet detection via photocell comes as standard, as do adjustable top and bottom wraps. Wrapping programs are available for "up only," "up & down" (cross wrapping), and "weatherproof" modes. The machine can also be operated manually if required. If the wrapper needs to be relocated temporarily, it can be easily lifted and moved by forklift via integrated cutouts. Nsdszr Hq Depfx Am Hsda In addition to a photocell for detecting dark packages or black film, the KVK 1A offers an optional variable wrapping height of up to 3,200 mm. Recommendation: The KVK 1A is ideal where ramps cannot be used due to space constraints or when particularly heavy or unstable goods should not be pushed onto the turntable via a ramp. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Leto izdelave: 2026, stanje: novo, Our KVK 1A is an almost identical sister model to the KVK 2 (MA), meaning it is a semi-automatic stretch wrapper with a turntable. In comparison to the KVK 2 MA, it is equipped with a recess that allows for ground-level loading with a manual pallet truck. The only operations that must still be performed manually on this wrapper are attaching and cutting the film. Ndjdozr Hmrjpfx Am Hja Weighing 700 kg, this model is also designed for professional use and has a load capacity of up to 1,500 kg. The 1A features a 1,500 mm turntable and, as standard, can wrap pallets up to 2,400 mm in height. Both turntable and film carriage speeds are adjustable, and the very finely adjustable electromagnetic brake is controlled via potentiometer, allowing you to tailor the automated wrapping process perfectly to your product. Automatic pallet detection via photocell comes as standard, as do adjustable top and bottom wraps. Wrapping programs are available for "up only," "up & down" (cross wrapping), and "weatherproof" modes. The machine can also be operated manually if required. If the wrapper needs to be relocated temporarily, it can be easily lifted and moved by forklift via integrated cutouts. In addition to a photocell for detecting dark packages or black film, the KVK 1A offers an optional variable wrapping height of up to 3,200 mm. Recommendation: The KVK 1A is ideal where ramps cannot be used due to space constraints or when particularly heavy or unstable goods should not be pushed onto the turntable via a ramp. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Stanje: dober (rabljeno), Leto izdelave: 1982, Dolžina reza: 4.300 mm Nodpfx Ameygm Tie Hjda Višina reza: 1.800 mm Teža stroja pribl.: 600 kg

Stanje: rabljeno, Leto izdelave: 2017, HOLZ-HER strojna oprema za obdelavo robov LUMINA 1380 Rabljen stroj Letnik izdelave: 2017 Stanje: dobro ohranjeno Motorno nastavljiv pritisk Nodpfezpzy Ujx Am Heda Debelina robov (rolo): 0,4 – 3 mm Debelina robov (trakovi): največ 3 mm z agregatom FF701 največ 8 mm brez agregata FF701 največ 15 mm z možnostjo menjave orodja na večfunkcijskem rezalnem agregatu Višina roba: največ 65 mm Debelina obdelovanca: 8 – 60 mm Širina obdelovanca: najmanj 60 mm Dolžina obdelovanca: najmanj 160 mm Hitrost podajanja: brezstopenjska, 10 – 18 m/min Nadzorna enota Edge Control 19 z 18,5-palčnim barvnim zaslonom na dotik (razmerje 16:9) Način ECO – varčni način Vhodni vodnik dolžine 1350 mm Motorno nastavljiv vhodni vodnik Agregat za grobo obdelavo 1802, podajalnik robov MG701 SYNCHRO Postaja za nanašanje lepila Glu Jet GJ302, avtomatska (obnovljena leta 2026) Vključno z vozilom za menjavo Vključno s hitrimi spojkami Vključno z držalom HSK za agregat Vključno z avtomatskim prepoznavanjem agregata Posoda za zbiranje lepila GLU JET Pritisk 1913 MOT Agregat za obrezovanje 1918 (60 mm), pnevmatski (2 x 0,45 kW, 12000 min-1), pnevmatsko nastavljiv 0/10° Agregat za rezkanje FR701 6 popolnoma digitalnih NC servo osi. Agregat za oblikovno rezkanje FF701 4 popolnoma digitalne NC servo osi. Agregat za glajenje 1929 MOT4, vključno z visokosijajnim kompletom Agregat za glajenje površine FK701 Razpršilna naprava 1856 za območje vhoda in izhoda Razpršilna naprava (sredstvo za ločevanje) za območje za pritiskom Avtomatsko mazanje verige Adaptivna regulacija količine pritiska in lepila Lokacija: Bavarska Razpoložljivost: približno avgust 2026

Stanje: rabljeno, Leto izdelave: 2019, Used machine Year of manufacture: 2019 Njdpfjzpzy Ijx Am Heda Condition: Good (Machine has undergone extensive annual maintenance. Last serviced in March 2026!) Equipment: - iTronic – Adaptive pressure and glue dosing control; automatic, program-dependent fine adjustment - MOT SPS INFEED FENCE ADJUSTMENT - Automatic chain lubrication: intelligent automatic transport chain lubrication - Edge Control 19 controller - EL GRM graduated 400V50HZ 2.2KW V2 SPRINT 1329 PERFORMANCE 400V50HZ - Edge Control 19 controller with 18.5" touchscreen color display 16:9 - ECO MODE energy-saving mode This energy-saving mode is an automatic standby function - Jointing unit 1802 (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for jointing panel edges - Cutter, diamond Ø 70 x 64 x 30 mm, Z2+2, left rotation Air Stream System (HOLZ-HER / LEUCO patent) - Cutter, diamond Ø 70 x 64 x 30 mm, Z2+2, right rotation Air Stream System (HOLZ-HER / LEUCO patent) - Edge feeding 1901 SYNCHRO Automatic transport of coil and strip materials - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) - DW501 PLC MOTOR. SPRINT MOTORIZED - Spray system GM501 after pressure unit with lubricant Recommended for high gloss edges - End trimming unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm), pneumatically swiveling 0/10° - Milling unit FR701 100% repeat accuracy at the push of a button thanks to backlash-free mechanics - Air Stream System Multi-cutter, diamond Ø 70.9 x 16 mm, Z=2+2 - Air Stream System Multi-cutter, diamond Ø 70.9 x 16 mm, Z=2+2 - Profile milling unit FF701 100% repeat accuracy at the push of a button thanks to backlash-free mechanics - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z=4 Radius R = 2 mm, left rotation with CM technology - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z=4 Radius R = 2 mm, right rotation with CM technology - Scraper unit 1929 MOT4 incl. high-gloss package with motorized adjustment of tracing rollers - HW reversible blades for scraper holder R = 2.0 mm (2 pieces required) - Flat scraper FK701 With preliminary and final tracing for removing glue residue - Spray unit TR501 for infeed and outfeed (separating agent + cleaning agent) - Including nesting shoes below with dedicated spray unit Location: Hesse Availability: Approx. July 2026

Stanje: rabljeno, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2014, Leto izdelave: 2014, Oprema: ABS, Kiper z napravo za črpanje 2x aluminijasta omarica Nosilec za cevi + cevi Ndodpfjzfyiysx Am Hea 8x nosilcev za kontejnerje Zbirna posoda Protizdrsna hoja plošča Dobro stanje Pridržujemo si pravico do napak pri vnosu, sprememb, napak in vmesne prodaje. Podani podatki v naših oglasih, na internetu, na cenovkah in slikah so nezavezujoči opisi in ne predstavljajo zajamčenih lastnosti. Prodajalec ne prevzema odgovornosti za tipkarske ali prenosne napake.

Stanje: rabljeno, konfiguracija osi: 2 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, prva registracija: 12/2016, dolžina tovornega prostora: 6.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.530 mm, skupna dolžina: 9.000 mm, skupna širina: 2.480 mm, skupna višina: 3.900 mm, vzmetenje: zrak, velikost pnevmatike: 385 / 55 / R22.5, medosna razdalja: 6.750 mm, Leto izdelave: 2016, Splošne informacije Letnik modela: 2026 Konfiguracija osi Dimenzija pnevmatik: 385 / 55 / R22.5 Znamka osi: BPW Zavore: diskovne zavore Vzmetenje: zračno vzmetenje Os 1: največja obremenitev osi: 9000 kg; profil pnevmatik na levi strani: 30 %; profil pnevmatik na desni strani: 30 % Os 2: največja obremenitev osi: 9000 kg; profil pnevmatik na levi strani: 30 %; profil pnevmatik na desni strani: 30 % Teže Lastna teža: 3.150 kg Nosilnost: 14.850 kg Največja dovoljena masa: 18.000 kg Ndjdpfx Aezv I Apjm Hea Funkcionalnost Znamka nadgradnje: Booi Carrosserie Plywood BDF Box Zgodovina Število lastnikov: 1 Varnost izdelka Proizvajalec: Kuijpers Trading BV, Minosstraat 8, 5048CK TILBURG, NL