Efi 16H Pro nakup rabljenega (7.663)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Vzdržljiva in zmogljiva industrijska ultrazvočna čistilna naprava. Primerna za uporabo v proizvodnji, delavnici in servisu. Ročno varjena kad iz nerjavečega jekla V4A / 1.4401 / AISI 316, ni gastro kad -> primerna za pH vrednost 0-13; debelina materiala 15/10 mm. Vključno s košaro in pokrovom iz nerjavečega jekla. Prostornina kadi: 28 litrov Notranje mere kadi: 500 x 290 x 200 mm Zunanje mere naprave: 530 x 325 x 400 mm Teža: 20 kg Ultrazvočna frekvenca: 38 kHz Nljdpfehma S Rex Agxja Ultrazvočna moč eff./max.: 400/800 W Moč grelca: 1.200 W Skupna poraba: 1.600 W Sweep: da

Stanje: novo, Leto izdelave: 2025, Dolžina mize 3050 mm Širina mize 1530 mm Nsdpewp Ta Njfx Agxjla Gorilniške glave 1 Hod 350 mm Hitrost 140 m/min - Nova naprava - - Vlaknovi laserski rezalni stroj - - 6 kW RAYCUS - s krmiljenjem Cypcut FSCUT 4000E, CYPNEST offline programska oprema, vlaknovi laserski rezalni vir RAYCUS, brezžična CNC ročna enota, dvo-stopenjska menjalna miza, izvlečne predale v mizi, euèinkovito odsesavanje dima, spremljanje rezalnega prostora in mize preko kamere, LEUZE svetlobna zavesa in THK linearna vodila * Za več informacij o natančni serijski opremi in razpoložljivih možnostih obiščite našo spletno stran ali nas pokličite neposredno *

Stanje: rabljeno, prevoženi kilometri: 120.000 km, moč: 120 kW (163,15 KM), prva registracija: 10/2019, vrsta goriva: dizel, skupna masa: 3.500 kg, naslednji pregled (TÜV): 11/2026, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, skupna dolžina: 6.363 mm, skupna širina: 2.050 mm, skupna višina: 2.522 mm, Leto izdelave: 2019, Oprema: centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, Special equipment: Nledpfxey D Iqxs Agxea Passenger airbag, electrically adjustable and heated exterior mirrors (both sides), design package, driver assistance system: emergency brake assist, reinforced rear suspension, speed limiter, rear wing doors (opening angle 270 degrees), cabin seats: suspension driver's seat, seat base paneling Additional equipment: Driver airbag, exterior mirrors with wide-angle, cargo area floor plate, onboard computer, rear wing doors without glazing, body/build: high-roof panel van standard, padded headrests, fuel tank: 90 liters, cargo area partition, engine 2.0 l – 120 kW Blue-HDI FAP CAT, radio pre-installation, 4 speakers, wheelbase 4035 mm, spare wheel (road tire), low emissions according to Euro 6 emissions standard, rear disc brakes, right-hand sliding door (cargo/passenger compartment), SCR system (AdBlue technology), side protection strips, seat cover/upholstery: fabric, cabin seats: double passenger seat (incl. automatic seatbelt), cabin seats: driver's seat with armrest, height-adjustable, cabin seats: driver’s seat with lumbar support, permissible total weight 3.5 t The vehicle is in very good condition! Service booklet, timing belt new Financing possible through Santander Bank

Stanje: rabljeno, prevoženi kilometri: 39 km, moč: 150 kW (203,94 KM), vrsta goriva: električni, prva registracija: 03/2026, barva: modra, število sedežev: 5, Oprema: ABS, klimatska naprava, navigacijski sistem, * 30-color ambient lighting * Double-sided armrests for front seats * Heated windscreen with thermal insulation glass * Pneumatically adjustable lumbar support on both sides * Seat heating for both seats in the cab, independently adjustable left and right * App-Connect including App-Connect Wireless for Apple CarPlay and Android Auto * 9 speakers (5 front, 4 rear) * Digital radio reception (DAB+) * "Comfort" mobile phone interface with inductive charging function * "Discover Pro" navigation system * Anti-lock Braking System (ABS) * Driver and passenger airbags with passenger airbag deactivation * Adaptive Cruise Control (ACC) "stop & go" with speed limiter * Anti-theft alarm system with interior monitoring, backup horn, and towing protection Nedpfx Agswz T Epsxola * Driver assistant "Travel Assist" including lane keeping assistant "Lane Assist" and "Emergency Assist" * Emergency brake assistant "Front Assist" with pedestrian and cyclist detection * Automatically dimming interior rearview mirror * Proactive occupant protection system in conjunction with "Front Assist" * Electromechanical power steering, speed-sensitive * "Rear View" reversing camera * Intermittent windscreen wiper control with rain sensor * Lane change assistant "Side Assist" * Traffic sign recognition * 11 kW AC charging power (alternating current) * USB-C interfaces * 4 "Solna" alloy wheels 8 J x 20 at the front, 10 J x 20 at the rear, in black, high-gloss turned finish * Foldable tow-bar with electric release * Option to change infotainment display and central controls/steering wheel trim from Electric-White to Black * "Plus" assistance package including "Area View" surround view with "Rear View" reversing camera * Evasive maneuver support and turn assist * Exterior mirrors: driver's side convex, passenger side convex * Exterior mirrors electrically adjustable, foldable, and heated, with passenger mirror tilt function * Three-point automatic safety belts for front seats with belt tensioners, belt end fittings, and height adjustment * Dynamic High Beam Control "Dynamic Light Assist" for LED matrix headlights * Infotainment display and central controls trim in black * Electric tailgate (opening and closing) with "Easy Open" and "Easy Close" function * Electric motor system output 150 kW, base motor: N06/N07 * Transmission for electric drive (single-speed) * HT - LED matrix headlights with automatic driving light control, poor weather light, coming/leaving home function * "Air Care Climatronic" air conditioning with active combination filter, auxiliary climate control, and 2-zone temperature regulation * Comfort seats left and right, first row * Short wheelbase, short rear * LED luggage compartment lighting * "Solna" alloy wheels 8 J x 20 front, 10 J x 20 rear, black, high-gloss turned finish * Dynamic headlight range control with dynamic cornering light * Memory function for "Park Assist Plus" * Multifunction steering wheel in synthetic leather, touch-operated, heated * LED tail lights with dynamic turn signals * "Park Assist Plus" including parking aid * "Ready 2 Discover" radio with 30.48 cm (12") touch color display * Wheel bolts with extended anti-theft protection * "Rear View" reversing camera as alternative to "Area View" in "Plus" assistance package * Rear windows in tinted thermal insulation glass * Left & right electric sliding doors * Tire pressure monitoring indicator

Stanje: rabljeno, prevoženi kilometri: 16.500 km, moč: 120 kW (163,15 KM), prva registracija: 08/2025, vrsta goriva: dizel, skupna masa: 2.800 kg, naslednji pregled (TÜV): 08/2027, barva: siv, vrsta prenosa: samodejen, število sedežev: 3, dolžina tovornega prostora: 2.870 mm, širina tovornega prostora: 1.650 mm, višina nakladalnega prostora: 1.380 mm, Leto izdelave: 2025, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, As new condition, factory warranty until 08/2025. Special features: Towing capacity 2,500 kg, trailer coupling: wiring for trailer socket, electrically folding exterior mirrors, electric parking brake with hold function, wooden floor in cargo area, LED cargo area lighting, metallic paint, Multibeam LED including high-beam assistant Plus, Park package with reversing camera, cargo securing rail system, double passenger seat in cab, heated driver’s seat, smartphone integration (Apple CarPlay and Android Auto), bumpers and attachments painted in body colour, loading compartment lining: plywood. Further equipment: Nodpfxoy Ebdbe Agxsla 3-button remote control for central locking, third brake light, adaptive brake light, passenger airbag, driver airbag, hill start assist, electrically adjustable and heated exterior mirrors (both sides), exterior mirrors with blind spot assist, outside temperature display, BlueEfficiency package, DAB tuner (digital radio reception), tachometer, automatic headlight activation, driver assistance system: active brake assist, lane keeping assist, Attention Assist (fatigue detection sensor), intelligent speed assistant, breakdown management, crosswind assist, 250 A alternator, 210 km/h speed limiter, G-Tronic automatic transmission (9-speed), front cup holders, lockable glove compartment, tailgate, standard panel van body, instrument cluster with colour display, comfort central locking, communication module (LTE) for digital services, 70-litre fuel tank, full partition in cargo area, manually adjustable steering column, multifunction steering wheel, headlight range adjustment, truck registration, Mercedes-Benz emergency call system, model update (2) with code, engine 2.0L - 120 kW CDI CAT, MBUX multimedia system (10.25" touchscreen), Pro, wheelbase 3,200 mm, full wheel covers, tyre pressure monitoring system, reversing camera, low emissions compliant with Euro 6e, right-side sliding door (cargo/passenger area), electro-mechanical power steering, seat belt warning system (passenger side), seat belt warning system (driver side), seat upholstery: Caluma fabric, comfort driver's seat in cab, lumbar support driver's seat, extendable driver's seat depth, 6.5x17" steel wheels, engine start/stop system, 12V socket in cab, 92 Ah AGM battery, navigation preparation (for MBUX multimedia system), Assyst service interval indicator, heat-insulating glazing, GVWR 2.80 t, dual front speakers.

Stanje: rabljeno, prevoženi kilometri: 59.700 km, moč: 100 kW (135,96 KM), vrsta goriva: dizel, vrsta prenosa: samodejen, skupna masa: 3.200 kg, prva registracija: 03/2022, emisijski razred: Euro 6, barva: bela, vzmetenje: jeklo, število sedežev: 8, gorivo: dizel, Oprema: ABS, airbag, centralno zaklepanje, drsna vrata, filter saj, greljenje sedeža, klimatska naprava, računalnik na krovu, servovolan, tempomat, E07 Hill Start Assist, EY5 Mercedes-Benz Emergency Call System, EY6 Breakdown Management, G43 9G-TRONIC Automatic Transmission, JK3 Combination Instrument with Pixel Matrix Display, V23 Interior Trim Premium Version, RS7 Steel Wheels 6.5 J x 17, EA4 Audio 40 System, SE5 Lumbar Support Driver's Seat, XO9 Mercedes-Benz MobiloVan with DSB and GgD, T70 Child Safety Locks on Rear Passenger Doors, T74 Grab Handle for Entry, T75 Grab Handles for Driver and Front Passenger, CF7 Comfort Suspension, UR3 Rear Seat Fastening with Quick Release for 2 Seat Rows, HH9 Semi-automatic TEMPMATIC Air Conditioning, V36 Roof Lining, E1D Digital Radio (DAB), Y10 First Aid Kit, MJ8 ECO Start/Stop Function, IB6 Model Series C447 Vito/V-Class, RD8 Full Wheel Covers, H00 Warm Air Duct to Passenger Compartment, MS1 Cruise Control, HI1 Climate Zone 1 (Cold/Comfort), V41 TPO Plastic Flooring in Passenger Compartment, RM1 M+S Tires, W65 Tailgate, Z42 Registration as Passenger Car, LA2 Light Assistant, C70 Pedestrian Protection, HZ0 Electric Auxiliary Heater, ZM4 Combi Vehicle, E34 Buffer Battery for Start Process, J55 Seat Belt Warning for Passenger Seat, H16 Seat Heating for Driver, H15 Seat Heating for Passenger, XA5 Weight Variant 3,200 kg, EL8 2-Way Speakers Front, ED4 Fleece Battery 12 V 92 Ah, JF1 Rain Sensor, T14 Active Retainer Sliding Door, VV9 Roof Frame Fixing Points, W78 Rear Door Window with Wiper and Washer System, RF1 Tire Brand: Continental (10), SH2 Thorax-Pelvis Sidebag Passenger, SH1 Thorax-Pelvis Sidebag Driver, F61 Interior Mirror, SH9 Windowbags for Driver and Passenger, VF4 Fabric Upholstery Caluma Black, F66 Lockable Glove Compartment, H20 All-round Heat Insulating Glazing, F68 Exterior Mirrors Heated and Electrically Adjustable, JW8 ATTENTION ASSIST, S04 Adjustable Passenger Seat. You can reach us by phone from Monday to Friday until 8:00 PM and Saturdays until 4:00 PM!! Further Information:!! Leasing/financing and trade-in possible!! !! !! -Subject to errors and prior sale!! Nlsdpfx Ageyc Rzvexea -All information without guarantee ... more on our homepage

Stanje: dober (rabljeno), Leto izdelave: 2007, Stroj je v dobrem stanju, Ročno prikazani deli niso priloženi. SK 40, 24 mest za orodja v menjalcu orodij. Nedpfx Agswk Nm Ioxela 10.000 min⁻¹

Stanje: rabljeno, Format: 385 x 700 mm Nledey Dufispfx Agxoa Oprema: Maksimalna velikost lista: 700 mm x 385 mm Minimalna velikost lista: 210 mm x 140 mm Minimalna debelina papirja: 110 mm Maksimalna gramatura papirja: 400 g/m² Hitrost: 6000 (A4 bigano in prepognjeno) Dimenzije (D)2020 mm (Š)680 mm (V)1265 mm Napajanje: 240V 50/60Hz Teža: 190 kg

Stanje: novo, Leto izdelave: 2022, Zumex Versatile Pro Orange Juicer Product: Freshly squeezed juice Fruits per minute: 22 fruits/min Basket capacity: 10 kg Fruit size: 65-81 mm Power consumption: 2.7 A Power: 380W | 0.4 HP Voltage: 230-240 V / 50-60 Hz Safety: Three-level magnetic safety control Dimensions (W x D x H): 47.5 x 58 x 165 cm Weight: 87 kg Professional juicer with a 10 kg orange hopper, designed for self-service and efficient preparation of high-quality juices. Offer the best juice with this intelligent device featuring a refined design, perfect for cafés, self-service stores and hotels with high juice demand, all on a footprint of just 0.26 m²! The juicer’s output is up to 1.5 litres of fresh juice per minute. Operation via touch start/stop buttons. Citrus peels are automatically discharged into two removable containers located at the bottom of the unit. Suitable not only for juicing oranges but also other citrus fruits. Safety features include automatic blade and motor locks. The motor stops when the cover is opened. Engine protection against overheating and crushing mechanism blockage. Built-in AS antibacterial system. Feel free to contact us. Nljdpfewk D Nqsx Agxoa

Stanje: rabljeno, prevoženi kilometri: 14.540 km, moč: 120 kW (163,15 KM), prva registracija: 08/2025, vrsta goriva: dizel, barva: siv, vrsta prenosa: samodejen, število sedežev: 3, skupna dolžina: 5.140 mm, skupna višina: 1.910 mm, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), klimatska naprava, * 2-way front speakers * 9G-TRONIC automatic transmission * ATTENTION ASSIST * Adaptive brake lights * Passenger airbag * Active Brake Assist * Active Lane Keeping Assist * Towing capacity 2,500 kg * Fixed ball head towbar * Electrically folding exterior mirrors * Heated and electrically adjustable exterior mirrors * Model range: C447 Vito/V-Class * Mounting points in roof frame * Front passenger double seat * Hill start assist * BlueEFFICIENCY Package * Brake booster failure compensation * CO2-optimized braking system * COC documents * DIGITAL EXTRA: REMOTE SERVICES PLUS * DIGITAL EXTRA: UPDATES FOR INTELLIGENT SPEED ASSISTANT * DIGITAL EXTRA: NAVIGATION PRE-INSTALLATION * Digital radio (DAB) * ECO start/stop function * EMISSION STANDARD EURO 6E UP TO N1 * Headlight assistant * Electric parking brake * Speed limit 210 km/h * Weight variant 2,800 kg * Seatbelt warning for passenger seat * SEMI-AUTOMATIC AIR CONDITIONING SYSTEM TEMPMATIC * HOLD function * Main fuel tank 70 litres * Rear doors, double-leaf, opening up to the side wall * Wooden floor * Interior cargo lining up to roof height (wood) * Intelligent Speed Assist * PANEL VAN * Instrument cluster with color display * Comfort driver's seat * Comfort closing system * Communication module (LTE) for digital services * BODY COLOR: GRAPHITE GREY METALLIC DARK MB 7831 * LED light strip in cargo area * Cargo securing rail system * Steering wheel adjustable in tilt and height * Lumbar support driver's seat * MBUX multimedia system * MULTIBEAM LED with High Beam Assist PLUS * Mercedes-Benz MobiloVan with DSB and GgD * Mercedes-Benz emergency call system * Metallic paint * Multi-button remote control * Multifunction steering wheel * OM 654 DE 20 LA 120 kW (163 hp) 3,800 rpm * PRO * Roadside assistance management * Parking package with reversing camera * Wheelbase 3,200 mm, long rear overhang * Full wheel covers * Wireless tyre pressure monitoring on front and rear axle Nledpfxey Dm U Ae Agxea * Driver’s seat occupancy detection * Heated driver’s seat * Driver’s seat cushion depth adjustment * Smartphone integration package * Fabric Caluma black * CRUISE CONTROL * Blind Spot Assist * Full dividing partition * All-round heat-insulating glass * Registered as truck (N1) * Lockable glove compartment Conversion service for panel van commercial vehicles available: For example: Retrofitting towbar €990.00 Towing capacity upgrade €714.00 Front Protection Bar €790.00 Cargo compartment lining from €1,390.00 Mixto conversion €6,990.00 Bench seat system with single seats €7,900.00 Additional prices on request. Vehicle is from first ownership, SERVICE BOOK, ONE OWNER. We are happy to accept your used vehicle as a trade-in. Special financing from 4.99% available. DELIVERY POSSIBLE FOR AN ADDITIONAL CHARGE!!! Information provided online is non-binding description and does not constitute guaranteed characteristics. The seller is not liable for errors, input errors or data transmission errors / subject to change.

Stanje: rabljeno, prevoženi kilometri: 186.561 km, moč: 309 kW (420,12 KM), konfiguracija osi: 6x2, barva: zelen, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, vzmetenje: zrak, Leto izdelave: 2019, Oprema: ABS, EBS (Elektronski zavorni sistem), klimatska naprava, For inquiries regarding the vehicle, Mr. Seidel will assist you (by phone at ...). TGS 26.420 6x2-4 LL Hiab 177K PRO !!! 2 UNITS AVAILABLE !!! Equipment: - Crane: Hiab 177K Pro - Pallet grab - Electric windows - Air conditioning - Rear-view camera system - Central locking - Air-suspended driver's seat - Bluetooth - Touchscreen - USB - Radio - Hands-free kit - Cruise control - Engine brake - Lane departure warning system - Hill-start assist - ABS/ESP/ASR - Sun visor - Roof hatch - Refrigerator - Heated exterior mirrors - Electrically adjustable exterior mirrors - Differential lock - PTO (power take-off) - Halogen headlights - Fog lights - Additional rear and crane working lights - Daytime running lights - Lift axle - Air suspension on front and rear axles - Roof spoiler - 40mm Ringfeder coupling - Coupling heads - MAN Rio telematics - NLA steered axle Cargo area dimensions: Length 6,500 mm x Width 2,480 mm x Height 950 mm Tyre tread depth: 1st axle 12 mm, 2nd axle 9–15 mm, 3rd axle 9–10 mm Gross vehicle weight: 26,000 kg Unladen weight: 14,465 kg Payload: 11,535 kg On request, we can provide you with a leasing or financing offer. Mr. Seidel (Tel. ...) will be happy to assist you. Njdpfx Agjyfp Itjxola Further information can be found on our website. ... Subject to errors, changes, and prior sale! ESP Cab type: Short-haul / Local transport = Additional Information = Suspension: Air suspension Engine displacement: 12,400 cc GVW: 26,000 kg External dimensions: 0 x 2,550 x 3,800 mm Cargo space dimensions (L x W x H): 6,500 x 2,480 x 950 mm Please contact Tobias Ebert for more information.

Stanje: rabljeno, Leto izdelave: 2017, Pregled Ta avtomatski stroj za ovijalno pakiranje kartonov je bil leta 2018 izdelan pri nemškem podjetju KRONES. Model VARIOPAC PRO W-7 je namenjen pakiranju PET steklenic v kartonske škatle. Stroj je še vedno nameščen, priključen na električno omrežje in trenutno v proizvodnji. Na voljo bo od sredine maja 2026 in si ga je možno po dogovoru ogledati med obratovanjem. Tehnični podatki Zmogljivost: 67 kartonov/min (x6) Formati: 1000 ml – 3×2 – enotirno 500 ml – 6×4 – enotirno Uporaba: ovijalno pakiranje kartonov (wrap-around) za PET steklenice Konfiguracija: ovijalni stroj za pakiranje Njdpfey A Nd Dsx Agxela

Stanje: novo, Leto izdelave: 2021, Rešetkasta tla/ police za paletne regale Podatki: - 3-delna, pocinkana, za prostor 270 x 110 cm (99 € neto) Nsdpfjy Hk Ewsx Agxela - 4-delna, pocinkana, za prostor 360 x 110 cm (132 € neto) - Novo blago na zalogi - Nosilnost: 1000 kg na rešetko pri enakomerno porazdeljeni obremenitvi —VEČKRAT NA VOLJO!!— Cena: 99,00 € neto + zakonsko določeni DDV Prejmete račun z obračunanim DDV. Naše priporočilo: Sporočite nam vaše potrebe… Z veseljem vam pomagamo pri izvedbi vaših projektov, od načrtovanja do naročila in montaže. Dostava po dogovoru po ugodni ceni.

Stanje: rabljeno, prevoženi kilometri: 97.500 km, moč: 120 kW (163,15 KM), prva registracija: 05/2019, vrsta goriva: dizel, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 3, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, garancija za rabljena vozila, klimatska naprava, navigacijski sistem, sistem za imobilizacijo, Special equipment: Passenger side airbag, City package, driver assistance system: emergency braking assist, reinforced rear suspension, rear wing doors (opening angle 270 degrees), navigation system with color display, driver’s seat heated, driver's cab seat base cladding Additional equipment: Foldable ramp for loads up to 500KG Nodpfsv Sgqnjx Agxjla Driver’s side airbag, audio system: radio with integrated CD player (MP3 compatible) – integrated display, exterior mirrors with wide-angle, load compartment floor plate, on-board computer, rear wing doors without glazing, body type/structure: high-roof panel van, padded headrests, fuel tank: 90 liters, load compartment partition, engine 2.0 L – 120 kW BlueHDi FAP CAT, wheelbase 4035 mm, spare wheel with road tires, low emissions as per Euro 6 standard, rear disc brakes, sliding door for load/passenger area on right side, SCR system (AdBlue technology), side protection strips, seat upholstery: fabric, driver’s cab seats: double passenger seat (incl. automatic seatbelt), driver’s cab seats: driver’s seat with armrest, height adjustable, driver’s cab seats: driver’s seat with lumbar support, Start/Stop system, permissible gross vehicle weight 3.50 t.

Stanje: novo, nosilnost na konzolno roko: 650 kg, višina police: 4.000 mm, skupna dolžina: 4.000 mm, skupna širina: 1.480 mm, nosilnost na stojalo: 1.950 kg, Data: - H: approx. 400 cm - D: approx. 148 cm - L: approx. 400 cm - Cantilever arms: approx. 120 cm including 8 cm deflector at the front - Axle spacing: 130 cm - NEW stock available for immediate delivery. - 650 kg load capacity per arm - 1950 kg load capacity per upright - Uprights painted in RAL7016 - Cantilever arms painted in RAL3000 Nlodpfx Aoy Hiq Sjgxea - Arms are hooked in - Arms adjustable in 100 mm increments - Levels: base + 3 storage levels (4 storage levels total) The uprights included in this racking set are pre-prepared free of charge for potential conversion to double-sided use. Advantages of the hooked-in cantilever arm: see images. Racking consists of: - 04 x uprights incl. base, approx. 400 cm made from IPE180 - 12 x cantilever arms, approx. 120 cm, profile 10 cm x 4 cm - incl. all necessary connecting elements and bolts Price: €1,995.00 net €2,374.05 gross You will receive an invoice with VAT shown separately. Accessories such as floor anchors, collision protection, etc., can also be purchased from us. Transport: Delivery is available on request via our partner shipping company; costs depend on postal code. Assembly: Our trained staff are available to professionally assemble and dismantle your equipment if required. Our recommendation: Let us know what you need... We are happy to assist you with your projects, from planning and ordering to installation.

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, This single-sided heavy-duty cantilever rack is ideal for storing heavy long goods such as pipes, profiles, metal bars, steel beams, wooden slats, and sheet materials. With a total length of approx. 13.20 meters, a height of approx. 4.00 meters, and cantilever arms of approx. 120 cm, this long goods rack offers high storage capacity across 4 storage levels (base level + 3 additional levels). Each arm can support up to 500 kg, and each upright has a load capacity of up to 2,250 kg. The cantilever arms are bolted and height-adjustable in 200 mm increments thanks to the perforation pattern. The fully hot-dip galvanized finish ensures long-lasting protection for both indoor and outdoor use – new goods available ex stock Wietmarschen. PRODUCT DETAILS: - Rack type: Single-sided heavy-duty cantilever rack - Total row length: approx. 13.20 m - Total height: approx. 400 cm - Arm length: approx. 120 cm (made from IPE 80) - Upright spacing (center-to-center): approx. 131 cm - Levels: base level + 3 storage levels - Load capacity per arm: max. 500 kg (with evenly distributed load) - Load capacity per upright: max. 2,250 kg (with evenly distributed load) - Upright profile: IPE 160, approx. 400 cm including base - Perforation pattern on upright: approx. 20 cm - First hole above base: approx. 107.5 cm (top edge of base) - Topmost hole pair: approx. 50 cm below top of upright (top edge) - Design: single-sided, arms bolted - Finish: fully hot-dip galvanized - Availability: New or B-stock returned goods available from Wietmarschen warehouse SCOPE OF DELIVERY: - 11 x uprights, approx. 400 cm from IPE 160, incl. base, 20 cm pitch perforation Nsdpfx Aey Hii Usgxsla - 33 x cantilever arms, approx. 120 cm from IPE 80 (without end stops) - Incl. all connecting elements - Incl. all necessary bolts - 1 x load capacity sign Price: €5,660.00 net €6,735.40 gross You will receive an invoice with disclosed VAT. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery within Germany by our partner freight forwarder – freight costs depend on postal code - Professional assembly and disassembly by trained teams optionally available - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers is also possible PLANNING & CONSULTATION: Our planning department will gladly provide you with a non-binding offer tailored to your requirements. Whether new construction, conversion, or expansion – we provide expert advice for your rack configuration. Haven’t found the right solution yet? Visit our website for a fast overview of numerous offers and variations of our products! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or call. You can find our phone number on our company page. You can reach us by phone Monday to Friday, 08:00 - 16:00. Alternatively, send us a message with your name and phone number, and we will get back to you as soon as possible.

Stanje: novo, 15.06 linear meters of shelving racks, 60cm deep, workshop racks, warehouse shelving, large compartment racks, hand storage, shelving racks, small parts storage. Specifications: - Height: approx. 200 cm - Depth: approx. 60 cm - Length: approx. 15.06 linear meters Rack package, 15.06 linear meters, consisting of: - 16 uprights, approx. 200 x 60 cm, disassembled (incl. 2 feet & 2 end caps each) - 75 shelves, approx. 100 x 60 cm - 300 shelf brackets - 16 diagonal braces, 1176 mm (for cross bracing) Nlodey Hif Ajpfx Agxsa - 16 turnbuckles (for cross bracing) - Manufacturer: META CLIP - Load capacity: 150 kg per shelf with evenly distributed load - Levels: 5 storage levels - Surface: sendzimir galvanized - New stock available for immediate delivery - Made in Germany - 100% quality at the best price Frame pre-assembly can be carried out by us for a small surcharge of €2/net per piece. -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €2,116.00 net plus legally applicable VAT You will receive an invoice with VAT shown separately Transport: Delivery can be arranged by our partner forwarding agent on request; costs are dependent on postal code. Installation: Our trained personnel are available to assist you with the professional installation and dismantling of your equipment if required. Our recommendation: Let us know your requirements... We are happy to support you in realizing your projects, from planning and ordering to installation.

Stanje: novo, 60.06 linear meters of shelf racks, 60 cm deep – workshop shelving, storage racks, manual storage, boltless shelving, small parts storage Specifications: - Height: approx. 200 cm - Depth: approx. 60 cm - Length: approx. 60.06 linear meters Rack package 60.06 lfm, consisting of: - 61 uprights, approx. 200 x 60 cm, disassembled (incl. 2 x foot plates & 2 x end caps each) - 300 shelves, approx. 100 x 60 cm - 1200 shelf supports - 61 cross braces, 1176 mm (for cross bracing) - 61 turnbuckles (for cross bracing) - Manufacturer: META CLIP - Load capacity: 150 kg per shelf with evenly distributed load - Levels: 5 storage levels - Finish: Sendzimir galvanized - New stock, immediately available - Made in Germany - 100% quality at the best price Optional: Pre-assembly of the frames can be carried out by us for a small additional charge of €2/net per piece. -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €8,000.00 net plus legally applicable VAT You will receive an invoice with VAT shown separately. Nledpfx Aey Hidfsgxoa Transport: Delivery is available on request by our partner forwarding agent, shipping costs are postcode-dependent. Assembly: Our trained staff are also available to assist with professional assembly and dismantling of your equipment if required. Our recommendation: Please let us know your requirements... We are happy to assist you with your projects, from planning and ordering through to assembly.

Stanje: novo, 60.06 linear meters of shelf racks, 40 cm deep: workshop shelving, storage shelves, wide span shelves, hand storage, shelving for small parts. Specifications: - Height: approx. 200 cm - Depth: approx. 40 cm - Length: approx. 60.06 linear meters Shelf rack package 60.06 lm consisting of: - 61 uprights approx. 200 x 40 cm, disassembled (incl. 2 feet & 2 top caps each) - 300 shelves approx. 100 x 40 cm - 1,200 shelf supports - 61 diagonal braces 1,176 mm (for cross bracing) - 61 turnbuckles (for cross bracing) - Manufacturer: META CLIP - Load capacity: 150 kg per shelf with evenly distributed load - Levels: 5 storage levels - Surface: sendzimir galvanized - New stock from warehouse - Made in Germany - 100% quality at the best price Frame pre-assembly can be carried out by us for a small extra charge of €2/net per unit. -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €5,610.00 net plus legally applicable VAT You will receive an invoice with VAT shown separately. Transport: Delivery is arranged by our partner freight forwarder upon request, costs depend on postal code. Assembly: Nljdey Hic Ispfx Agxoa Our trained staff is available to provide professional assembly and disassembly of your warehouse equipment if required. Our recommendation: Let us know your requirements... We are happy to support you with your project—from planning and ordering through to installation.

Stanje: novo, 30.06 linear meters of shelving racks, 40 cm deep, workshop racks, storage racks, wide-span shelving, manual storage, shelving racks, small parts storage. Specifications: - Height: approx. 200 cm - Depth: approx. 40 cm - Length: approx. 30.06 linear meters Rack package 30.06 lfm consisting of: - 031 uprights approx. 200 x 40 cm, disassembled (incl. 2 x base plates & 2 x end caps per upright) - 150 shelves approx. 100 x 40 cm - 600 shelf supports - 031 cross braces 1176 mm (for bracing) - 031 turnbuckles (for bracing) - Manufacturer: META CLIP - Load capacity: 150 kg per shelf with evenly distributed load - Levels: 5 storage levels - Finish: sendzimir galvanized - New goods ex stock - Made in Germany - 100% quality at the best price Pre-assembly of frames can be carried out by us for a small surcharge of €2/net per piece. Nsdpsy Hiczjfx Agxjla -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Price: €3,661.00 net plus legally applicable VAT You will receive an invoice with VAT statement. Transport: Delivery can be arranged via our partner forwarding company on request, shipping costs are postcode-dependent. Assembly: Our trained staff are available to provide professional assembly and disassembly of your facility on request. Our recommendation: Let us know your requirements… We are happy to assist you in realizing your projects, from planning to ordering and assembly.

Stanje: novo, 15.06 linear meters of shelving racks, 40 cm deep, workshop shelves, storage racks, manual storage, boltless racking, small parts storage Specifications: - Height: approx. 200 cm Nsdpfx Aoy Hicnjgxela - Depth: approx. 40 cm - Length: approx. 15.06 linear meters Shelf package 15.06 linear meters, consisting of: - 016 x upright frames approx. 200 x 40 cm, disassembled (incl. 2 x feet & 2 x end caps per upright). - 075 x shelves approx. 100 x 40 cm. - 300 x shelf supports. - 016 x cross braces 1176 mm (for diagonal bracing). - 016 x turnbuckles (for cross bracing). - Manufacturer: META CLIP. - Load capacity: 150 kg per shelf with evenly distributed load. - Levels: 5 storage levels. - Surface finish: Sendzimir galvanized. - New stock, available from warehouse. - Made in Germany. - 100% quality at the best price. Pre-assembly of the frames is available upon request for a small additional charge of €2 net per piece. -- AVAILABLE IMMEDIATELY IN MULTIPLE QUANTITIES -- Price: €1,648.00 net plus statutory VAT. You will receive an invoice showing VAT separately. Shipping: Delivery is available upon request through our partner forwarding agent. Delivery costs depend on the postal code. Assembly: Our trained staff is available, if required, to professionally assemble and disassemble your equipment. Our recommendation: Let us know your requirements… We are happy to assist you with your projects, from planning and ordering through to assembly. Do you have questions or are you interested? Contact us simply by message or phone. Our phone number can be found on our company page. ☎️ We are available by phone Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 264630, trajanje garancije: 24 meseci, skupna masa: 49 kg, skupna širina: 380 mm, skupna dolžina: 540 mm, Demonstration machine / Exhibition piece (Year of manufacture 2026) 2 years warranty Machine in high-quality stainless steel design 20 liter capacity Description: The Miss Baker® PRO XL is Bernardi's top-of-the-line model, specifically designed for tabletop use. Thanks to its innovative diving arm kneading technology, compact design, and robust high-grade steel frame, it delivers the highest quality standards. With five speed levels, it ensures perfect processing, even for demanding doughs such as heavy yeast doughs. Advantages: - The world's first tabletop kneading machine with diving arm technology - Removable diving arms for effortless cleaning of the kneading tools - Intuitive touch control panel for easy and precise operation - Lid with ingredient feed opening for adding ingredients during kneading - 5 speed levels from 30 to 70 revolutions per minute - Available in two sizes: Pro (10 liters) & Pro XL (20 liters) - Available in three versions: white lacquered / red lacquered / stainless steel Technical data (according to manufacturer's specifications): Nljdpfx Asy Amt Ajgxsa - Flour capacity: 0.6 - 3.5 kg (depending on dough type) - Dough capacity: 1 - 8 kg (depending on dough type) - Bowl volume: approx. 20 liters - Motor power: 500 W - Arm revolutions: 30 - 70 rpm (5 speed levels) - Electrical connection: 230V - 1Ph - 50Hz - Dimensions: 380 x 540 x 530 mm (W x D x H) - Bowl diameter: 380 mm outer edge - Net weight: 49 kg

Stanje: novo, Condition new Delivery time approx. 2-4 weeks from order Country of origin: Poland Price: €1,595 Drilling capacity in structural steel: 23 mm Shank: 19 mm Weldon Motor power: 1.6 kW Thread-cutting capacity: M20 Length: 266 mm Width: 259 mm Height: 500 mm Weight: 17 kg Maximum drilling capacity: 23 mm Maximum annular cutter capacity: 50 mm Maximum cutting depth: 75 mm Stroke: 190 mm Motor speed: 160-250 / 390-580 rpm Minimum workpiece thickness: 8 mm Nedpfx Agjyrht Isxela The PRO-52T magnetic drill is designed for hole cutting and thread cutting operations. Its powerful motor with variable speed enables milling up to 50 mm and drilling up to 23 mm. Both forward and reverse operation, together with the new Promotech threading system, allow thread cutting up to M20. The two-speed gearbox with stepless speed adjustment enables optimal speed settings based on diameter, steel grade, or tool quality. The intelligent speed control system maintains constant motor speed regardless of changing loads. The innovative 360-degree LED indicator assists with proper machine operation and enhances workplace safety. Features and Benefits: • Powerful motor with robust 2-speed gearbox • Electronic Speed Stabilization System (ESSS) maintains consistent speed regardless of load changes • Capable of tapping through and blind holes • Milling with carbide or HSS cutters, or drilling • Electronic clutch • Overload and overheat protection • Rigid construction extends tool life • Tilt sensor stops the motor if the machine tips • 360-degree status monitoring system displays the drill’s condition and provides safety and diagnostic information, e.g. worn brushes • Innovative smart magnet with reduced weight • Magnetic Field Shape Control (MFSC) ensures maximum holding force on thin materials • Energy Saving Base (ESB) consumes only 50% power when the motor is idle • Semi-automatic wedge adjustment allows easy, quick, precise and reproducible guidance setting without specialist knowledge or experience • Intuitive control panel at the top of the drill • Large coolant tank Standard delivery set: • Drilling machine • Plastic case • Handles (3 pcs) • MT2 arbor with 19 mm (3/4”) Weldon tool holder • Safety strap • Cooling system • Protective spring for coolant hose • MT2 drift • 6 mm Allen key • 5 mm Allen key with handle • 2.5 mm Allen key • 8 mm open-end wrench • Tool box • User manual OPTIONS (PRICES ON REQUEST): Pressure cooling system 2 ltr Vacuum pad Pneumatic ejector Pipe fastening

Stanje: novo, Condition: new Delivery time: approx. 2–4 weeks from order Country of origin: Poland Price: €2,595 Drilling capacity in structural steel: 12 mm Spindle mount: 19 mm Weldon Motor output: 0.4 kW Nljdpfx Aoyrhtnegxoa Length: 361 mm Width: 238 mm Height: 352 mm Weight: 14.5 kg Max. drilling capacity: 12 mm Max. annular cutter capacity: 36 mm Max. cutting depth: 50 mm Stroke: 70 mm Motor speed: 260 rpm Min. workpiece thickness: 6 mm This special battery-powered magnetic base drilling machine is designed for use in remote locations where no mains power is available. The base contains very strong neodymium magnets and does not require electricity to operate. The PRO-36 PM Battery is equipped with an LED monitoring system that displays signals in green and red to indicate the current status of the drill and provide safety notifications. This machine can be used on convex (minimum diameter – 80 mm) and concave (minimum diameter 1000 mm) materials. With the PRO-36 PM Battery equipped with the CAS LiHD 10.0 Ah battery pack, up to 47 holes (D=20 mm) can be drilled in 10 mm steel plates. Features and benefits: • LED monitoring system flashes green when insufficient adhesion is detected, for example due to a gap or workpieces that are too thin • Dual guide system ensures exceptional precision and maintenance-free operation • Overload protection • Tilt sensor stops the motor in the event of machine failure or magnetic detachment • Control panel is fitted with so-called "vandalism-proof" illuminated motor start/stop buttons Standard delivery set: • Cordless drill with cooling system • Plastic case • 4.0 Ah battery • Handle (3 pieces) • Safety strap • 4 mm Allen key with handle • Operating instructions OPTIONS (PRICES ON REQUEST): Charger Pressurised cooling system Vacuum pad Vacuum pump Pneumatic ejector

Stanje: novo, Condition: new Delivery time: approx. 2–4 weeks from order Country of origin: Poland Price: €1995 Drilling capacity in structural steel: 25 mm Tool holder: 19 mm Weldon Motor power: 1.6 kW Thread cutting capacity: M20 Length: 266 mm Width: 259 mm Height: 505 mm Weight: 18 kg Max. drilling capacity: 25 mm Max. annular cutter capacity: 70 mm Nodpfx Agsyrhrwsxsla Max. cutting depth: 75 mm Stroke: 190 mm Motor speed: 120-190 / 290-450 rpm Min. workpiece thickness: 8 mm The PRO-72T magnetic drilling machine is suitable for drilling and thread cutting. The powerful motor with variable speed allows milling up to 70 mm (2-3/4") and drilling up to 25 mm (1"). Thanks to the clockwise and counterclockwise rotation, threads up to M20 can be cut with the new threading system from Promotech. The two-speed gearbox with stepless speed adjustment enables the optimal setting depending on hole diameter, steel grade, or tool type. The intelligent speed control system keeps the motor speed constant regardless of load. The innovative 360° LED display simplifies operation and increases operator safety. Features and benefits: • Powerful motor with robust 2-speed gearbox • Electronic speed stabilization system (ESSS) for constant RPM regardless of load changes • Thread cutting in through and blind holes • Milling with carbide or HSS cutters as well as drilling • Electronic clutch • Overload and overheat protection • Sturdy design for longer tool life • Tilt sensor stops the motor in case of machine breakaway • 360° visualization indicates current machine status and provides safety and diagnostic information, e.g., worn carbon brushes • Innovative, lightweight smart magnet • Magnetic Field Shape Control (MFSC) for maximum holding force on thin materials • Energy-saving base (ESB) consumes only 50% power in standby • Semi-automatic spline adjustment for easy, fast, precise, and repeatable guide clearance setting without expertise • Intuitive control panel at the top of the drilling machine • Large coolant tank Standard scope of supply: • Magnetic drilling machine • Plastic case • Handles (3 pieces) • MK3 arbor with 19 mm (3/4") Weldon tool holder • Safety strap • Cooling system • Protective spring for coolant hose • MT2 drift • 5-mm T-handle hex key • 4-mm hex key • 2.5-mm hex key • 8-mm combination wrench • Operating manual OPTIONS (PRICES ON REQUEST): Pressure cooling system Pipe attachment