Ultrazvočni sistem čiščenja

Glogar MU28-PRO

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Closing force: 25/35 tons Opening stroke: 200 mm Mould height: 150-300 mm Tie bar spacing: 221 mm Distance between mounting plates: 350-500 mm Mould mounting plates (W x H): 342 x 250 mm Ejector stroke: 60 mm Screw diameter: 30 mm Hodeuykh Depfx Adkjni Screw stroke: 100 mm Injection volume: 70 cm³ Shot weight: 59 g Injection pressure: 1040 bar Operating hours: 34,748

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Ultrasonic Cleaning System ULTRA200 Usable platform dimensions: 850 x 450 mm Max. usable height: 400 mm Max. load capacity: 100 kg Volume: 380 liters + 55 liters (oil separator) Heating: 2 x 4 kW Completely made of stainless steel Heat and sound insulated External dimensions approx.: L 1,500 x W 950 x H 1,750 mm Control: Manufacturer Fatek, HMI by Weintek Electrical connection power: 10.55 kW Includes: - Automatic pneumatic goods lift - Surface overflow/oil separator for bath maintenance - Ultrasonic immersible transducer as 2-side sonication - Output: 2,000 watts effective / 4,000 watts peak - Multifrequency: 20 kHz / 40 kHz - Manual air blow gun Demonstration unit from the Glogar Technology Center, available immediately Hodpfx Asv U A Izsdksni

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, HD wash table – HD brush wash table The wash table features an adjustable 60 bar high-pressure pump, allowing for cleaning within an enclosed workspace. Cleaning is performed using an aqueous degreaser (10 kg included in the scope of delivery) at approximately 45°C. - Viewing window with lighting - Media filtration via cartridge filter - Convenient operation via foot switch - Including rotary table Technical data: - Working surface: 1,200 x 700 mm - Usable height: 400 mm - Load capacity: 50 kg - Working pressure: adjustable up to max. 60 bar - Pump output: 14 l/min - Washing temperature: adjustable up to max. 45°C - Tank capacity: 170 l - Heating capacity: 4,000 W - Total power: 8.0 kW - Voltage: 400 V AC 1P+N+PE; Frequency: 50 Hz - Machine weight: approx. 180 kg - Overall dimensions with lid open: 1,480 x 991 x 2,080 mm Hnodpfohl Ifzjx Adkji

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, • Debelina stekla (mm): do 30 Hnodpfx Ajxgtqgedksi • Višina stekla (mm): do 2000 • Čistilne krtače: 4 spredaj in 4 zadaj

Leto izdelave: 2023, stanje: novo, SONDA ist eine kostengünstige Lösung zur Nachrüstung einer Ultraschall-Reinigungseinheit. Wenn Sie bereits über einen eigenen Edelstahltank verfügen und diesen in eine Ultraschallwascheinheit verwandeln möchten, ist die SONDA die ideale Wahl. Wir fertigen SONDA-Eintaucheinheiten unabhängig von den Abmessungen Ihres Tanks. Sie müssen uns lediglich die Maße Ihres Tanks mitteilen und das Gerät mit wenigen Handgriffen montieren. Hsdpfsd I E Ivsx Adksni Funktionsprinzip -Jede einzelne, tauchfähige SONDA-Einheit arbeitet mit einem eigenen Hochfrequenzgenerator. -Die tauchfähigen SONDA-Module sind montagefertig für die Tankwand vorbereitet. -Ideal geeignet zur Nachrüstung großer Behälter, z.B. für Beschichtungs- und Oberflächenbehandlungsprozesse. Tauchschwinger, Ultraschallreiniger, Wandler, Ultraschall Gerne senden wir Ihnen auf Anfrage die technischen Spezifikationen zu.

Stanje: novo, Leto izdelave: 2025, The Automatic Basket Cleaning System XTON Smart Cleaner SC1000™ is constructed from stainless steel AISI 304 and acid-resistant stainless steel AISI 316. It is designed for use in various industrial sectors and the automotive industry. The cleaning system is intended for degreasing and cleaning parts contaminated with oil or grease, without damaging the surface of the cleaned components. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner BA fluid, which, in combination with optimal temperature and pressure, effortlessly removes all types of contamination. The system operates in a closed loop at temperatures of up to 80°C. Standard equipment includes a rotating basket with a diameter of 100 cm and a 300-liter tank, which can be optionally thermally insulated to prevent rapid cooling of the cleaning fluid. The Smart Cleaner SC1000™ delivers high cleaning quality, time and energy savings, and safe, user-friendly operation. The cleaning system is designed for the automatic removal of contaminants from surfaces made of cast iron, aluminum, and steel. The design and construction of the Smart Cleaner SC1000™ meet the highest quality standards ISO 9001 and environmental standards ISO 14001. FEATURES: - Rotating basket with a diameter of 100 cm - Heated tank with a capacity of 300 liters - Dual liquid filtration system - Sensors for liquid level and temperature - Oil separator - Height-adjustable feet (up to 100 mm) - XTON Active Cleaner BA (5-liter starter pack) TECHNICAL DATA: - Weight: 200 kg - External dimensions – open chamber (W x D x H): 150 x 120 x 250 cm - External dimensions – closed chamber (W x D x H): 150 x 120 x 140 cm - Diameter of rotating basket: 100 cm - Load capacity of rotating basket: 300 kg - Adjustable working time: 0 – 99 min - Washing/fluid temperature: up to 80°C Hnsdpeu R Urhsfx Adkoi - Heating power: 9 kW - Tank volume: 300 L - Tank volume up to oil separator: 200 L - Pump capacity: 250 L/min - Spray pressure: 4.5 – 6 bar - Power supply: 3 x 400 V - Safety features: temperature sensor, emergency stop switch, limit switch - Protection rating: IP 54 - Declaration of conformity: CE

Stanje: rabljeno, Leto izdelave: 2002, obratovalne ure: 3.900 h, FOR SALE: EDGING MACHINE IN VERY GOOD CONDITION, USED SINCE NEW IN A SMALL GLASSWORKS. AVAILABLE FOR INSPECTION IN WROCŁAW. Hnedowb U Rgspfx Adkoi

Stanje: rabljeno, Maximum cutting width: 310 mm Maximum cutting height: 125 mm Saw blade diameter: 500 mm Motor power: 5.5 kW SALVAMAC LEGEND 500 – Semi-automatic under-table crosscut saw Hodpfov Uq Tljx Adkoni Maximum cutting range: 220x125 / 260x100 / 285x80 / 310x50 mm When cutting stacked boards, max. height: 100 mm. The framework is fully constructed from thick-walled, reinforced steel with complete surface coating. Sturdy floor mounting system with flanged steel feet for fixing hole. Two-handed safety cut control positioned ergonomically. Saw motor power: 5.5 kW. Adjustable cutting speed via pneumatic controller. Maximum weight balancing system for durability. Shock-absorption system. Independent pneumatic adjustments for adaptation to various processing tasks. Durable and easily replaceable saw blade setting bar. Carbide-tipped circular saw blade, diameter 500 mm, Z=108. Pneumatic top workpiece hold-down with electro-pneumatic control. Movement system utilizes innovative ball bearings with double dust protection and automatic lubrication system. CE-compliant electrical system. CE models must be equipped as standard with at least 1 meter long infeed and outfeed roller tables. Technical Data: ----- Max. crosscutting dimension: 220x125, 260x100, 285x80, 310x50 mm Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: Carbide (HM) Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 5 Nl Dust extraction port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: 400V / 50 Hz, 3-phase Working table height: 900 mm +/- 20 mm Color finish: RAL 7035 Machine additionally equipped with: ----- 2 m roller conveyor (right side of saw), non-driven rollers: Painted steel frame with galvanized rollers. Load capacity 230 kg, roller diameter 60 mm, spacing 250 mm, width 320 mm. Area between rollers enclosed with painted steel. Includes lateral guide. 2 m roller conveyor (left side of saw), non-driven rollers: Painted steel frame with galvanized rollers. Load capacity 230 kg, roller diameter 60 mm, spacing 250 mm, width 320 mm. Area between rollers enclosed with painted steel. Includes lateral guide, stop guide and millimeter scale. 2 heavy-duty pneumatic stops, width 200 mm each ----- Total price ex works: on request! ----- Images and video not original, show identical model. Other options such as extended infeed/outfeed tables or stop systems available on request! (Technical data as per manufacturer, subject to change without notice!)

Stanje: rabljeno, Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, ESG peč / linija za kaljenje stekla EFCO, 1500x3000 1500 x 3000 mm, desno – levo Letnik izdelave: 1997. 415 V, 50 Hz, 3 faze. V dobrem tehničnem stanju. Demontirana in pripravljena za nakladanje. Hsdpfxexguqno Adkeni

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, skupna širina: 5.000 mm, skupna dolžina: 10.500 mm, Dvigalna miza za rezanje stekla Hnsdev Dl Uijpfx Adkei