Donaldson Buran Dc 0450 Ab nakup rabljenega (14.662)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 37.656 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 85 t, širina odprtine za polnjenje: 1.500 mm, dolžina polnilne odprtine: 1.100 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 650 kg, skupna masa: 25.000 kg, kapaciteta rezervoarja za olje: 1.000 l, leto zadnje generalne obnove: 2024, volumenski pretok: 410 m³/h, transportna širina: 2.400 mm, transportna dolžina: 9.300 mm, Good day, We hereby offer you, without obligation, a used baler from the manufacturer Presona AB, type LP 85 VH1. The following technical data have been taken from the manufacturer's operating manual and brochures, for which we cannot assume any liability for the accuracy and completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours (as of March 25) Main press force: 85 t Specific press force: 100 N/cm² Pre-press door force: 28 t Feed opening dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Machine weight press: approx. 25 t Dsdpfx Aev T I Evec Nech Note: This machine was used in a recycling facility for compacting paper, cardboard, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have already been replaced in the last 3 years. The machine has been serviced regularly. We would be pleased if this press is of interest to you. Your Service Team, Mertens & Frowein GmbH

Stanje: zelo dobro (rabljeno), Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, generator air filter -Manufacturer: Donaldson, air filter type SMP 18 1045 Ovp -Quantity: 8 air filters available Dcsdpjpyk Itsfx Ac Noh -Price: per piece -Packaging dimensions: 265/265/H280 mm -Weight: 1.8 kg/each

Stanje: dober (rabljeno), Hydraulic pump, oil pump, gear pump -Shaft mounting: -Dimensions: 180/160/120 mm -Weight: 4.5 kg Dcodpsb A Sizjfx Ac Njh

Stanje: dober (rabljeno), Hydraulic pump, oil pump, gear pump - Shaft mounting: - Price: per unit Dcodsb A Siyepfx Ac Njh - Quantity: 2 available - Dimensions: 170/120/110 mm - Weight: 4.3 kg

Stanje: dober (rabljeno), Enkelschroef Schroefdiameter 25 mm Afmetingen (LxBxH) 1860 x 900 x 1850 mm Opties • Inclusief afhaaltrek Dodpovri Ddefx Ac Nsch • Inclusief koeltrog

Stanje: rabljeno, prevoženi kilometri: 15.900 km, moč: 81 kW (110,13 KM), prva registracija: 10/2020, vrsta goriva: bencin, skupna masa: 1.940 kg, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 2, Leto izdelave: 2020, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, Special equipment: - Driver/front passenger airbag - Driver airbag - Cool & Sound Package 1 - Multimedia audio system, Bluetooth hands-free system - Air conditioning - Cruise control - Front seat heating - Driver’s seat adjustment (6-way), front passenger seat adjustment (4-way) - Audio controls on the steering wheel - Electric front windows with anti-trap protection - Electrically adjustable, heated, and power-folding exterior mirrors Dcodsvra Tvepfx Ac Nsh - Rear park assist system Other features: - Driver airbag - Omission of sliding door on right-hand side (passenger/cargo area) - Hill Start Assist (HSA) - Rear wing doors without glazing - Body/construction: panel van - Full steel bulkhead - Engine 1.2 litre – 81 kW - Gasoline particulate filter (GPF) - Wheel hub covers - Wheelbase 2785 mm - Low-emission according to Euro 6d emissions standard - Start/stop system

Stanje: rabljeno, prevoženi kilometri: 10.600 km, moč: 75 kW (101,97 KM), prva registracija: 07/2020, vrsta goriva: dizel, skupna masa: 2.830 kg, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 3, Leto izdelave: 2020, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, Special equipment: Dcodovwiqhjpfx Ac Nsh - Towbar (removable ball head) - Comfort Package - Head airbag system - Front and rear parking sensors - Blind Spot Warning Comfort Package: - Multimedia audio system, Bluetooth hands-free, USB interface, smartphone integration (Apple CarPlay & Android Auto), rear parking sensors, leather steering wheel, audio controls on the steering wheel - Front and rear parking sensors - Exterior mirrors electrically adjustable and heated, electrically folding - Fog lights - Driver assistance system: Blind Spot Assist Towbar (removable ball head) Head airbag system Front side airbags Additional equipment: - Driver and front passenger airbags - Floor covering: luggage/load area in rubber - On-board computer - Brake assist - Double front passenger bench with storage compartment - Driver assistance system: Hill Start Assist (HSA) - Rear wing doors without glazing - Body/construction: panel van - Vehicle length variant: L1 - Partition wall separating the load compartment (closed) - Height-adjustable steering column (steering wheel) - Headlight range adjustment - Engine 1.5 Ltr. - 75 kW CDTI DPF - Rear parking sensors - Wheelbase 2925 mm - Tyre repair kit - Emission standard Euro 6d-TEMP (low emission) - Right sliding door - SCR system (AdBlue technology) - Visibility package - Steel rims 7x17 - Start/stop system - 12V power socket in boot/load compartment - 12V power socket in centre console - Outside door handles in black

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 650 mm, pomik osi Y: 480 mm, pomik po osi Z: 475 mm, širina mize: 450 mm, dolžina mize: 1.200 mm, obremenitev mize: 400 kg, skupna masa: 2.300 kg, Ponujamo rabljeni rezkalni stroj Abene Ab VHF-360Ti, letnik 2011. Serijska številka: 36120 Dcodsy Hgnhepfx Ac Noh Leto izdelave: 2011 Krmiljenje Heidenhain TNC620 Velikost mize: 1200 x 450 mm Največja obremenitev: 400 kg Pomik X: 650 mm, Y: 480 mm, Z: 475 mm Vreteno: BT40 Glavni motor: 7,5 kW Teža: 2300 kg Stroj je v odličnem stanju. Za dodatna vprašanja ali več informacij nas lahko kontaktirate preko sporočila ali po telefonu.

Stanje: novo, Leto izdelave: 2025, Example system for filling liquids into bottles, capping with a screw cap, and subsequent labeling of the bottles. Complete system consisting of: feed sorting table; filling machine with 4 filling heads for high or low viscosity liquids; capping machine for different cap sizes and shapes including cap sorting feed; labeling machine for bottles/cans/containers made of glass or plastic; collection table. The individual machines of the packaging line are interconnected by conveyor belts, which gives the system high flexibility in installation. Dsdpfx Aov Nlbasc Nsch Specifications: Number of filling nozzles: 4; filling range: 100-1000ml; dosing type: piston pump; accuracy: +/- 1%; bottle height: 15-400mm; bottle diameter: 25-200mm; speed: max. 1000 bottles/hour; label size: L25-300mm, W20-180mm. All wetted parts are made of stainless steel 304. Dimensions and total weight of the system depend on the final layout. Please note: This is just an example system. Final specifications may differ. The machine photo only shows the 4-head filling machine. Please note that our new prices are often lower than standard used prices. Feel free to contact us and tell us about your packaging requirements. Usually, 30-50 different new machines are always immediately available from stock. For custom-built machines, we offer very short delivery times from approx. 3 weeks. All machines are available with full warranty.

Stanje: rabljeno, prevoženi kilometri: 405.524 km, moč: 309 kW (420,12 KM), prva registracija: 07/2004, vrsta goriva: dizel, skupna masa: 26.000 kg, vrsta prenosa: mehanski, emisijski razred: Euro 3, Oprema: ABS, Kerax 420 dci Djdpfxox E Idhs Ac Nsch 16-stopenjski ročni menjalnik RETARDER Hiab 088B-2 Duo dvigalo 2x hidravlično iztegljivo Funkcija 5+6 za vrtljivo glavo in grabilo Abrolkipper Multilift z lomljivim krakom 20 ton Listnato vzmetenje spredaj in zadaj Motor in menjalnik delujeta dobro !! POZOR: ZAŽENE SE SAMO S START PILOTOM !! Belgijska registracija Cena 21.750,- € neto

Stanje: rabljeno, Donaldson Torit DCE prezračevalni filter, vložni filter Dedpfxexc Iyuj Ac Njch Tip: DLMV8/7S Vključuje 12 filtrovnih okvirjev po 1 meter Oglejte si tudi naše druge oglase VMA Wekerom

Stanje: novo, Leto izdelave: 1987, PowerCore ločevalnik prahu Donaldson Torit CPV Tip: CPV6 Dedpjxc Eyxjfx Ac Njch Neuporabljen Z novimi filternimi vložki Oglejte si tudi naše druge oglase VMA Wekerom

Stanje: zelo dobro (rabljeno), konfiguracija osi: 2 osi, prva registracija: 09/2016, barva: rdeča, Leto izdelave: 2016, obratovalne ure: 2.400 h, 2016 MAFI težke prikolice z dvojnim krmiljenjem in možnostjo spajanja (tla: 250x130 cm) z nosilnostjo 6.000 kg, na voljo 9 kosov Dcsdpfx Acsxzdz Sj Nsh = Dodatne informacije = Splošne informacije Letnik modela: 2016 Tehnične informacije Vrsta goriva: Električni Prednja os: Krmiljena Zadnja os: Krmiljena Teže Lastna teža: 525 kg Nosilnost: 6.000 kg Največja dovoljena masa: 6.525 kg Funkcionalno Znamka nadgradnje: MAFI 1060/6t Stanje Tehnično stanje: zelo dobro Videz: zelo dobro Dodatne informacije Za več informacij kontaktirajte Arne Honingh.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, obratovalne ure: 2.400 h, nosilnost: 6.000 kg, vrsta goriva: električni, barva: rdeča, 2016 MAFI dvakrat zglobno vodeni in spajljivi težkotonážni priklopniki (tla: 250x130 cm) z nosilnostjo 6.000 kg, na voljo 9 kosov = Dodatne informacije = Splošne informacije Letnik izdelave: september 2016 Modelno leto: 2016 Konfiguracija osi Prednja os: vodena Zadnja os: vodena Dcsdpfx Asxzd A Aec Noh Teže Lastna teža: 525 kg Največja dovoljena masa: 6.525 kg Funkcionalno Znamka nadgradnje: MAFI 1060/6t Stanje Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Dodatne informacije Za več informacij se obrnite na Arne Honingh.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, obratovalne ure: 2.400 h, nosilnost: 6.000 kg, vrsta goriva: električni, barva: rdeča, 2016 MAFI dvakrat zglobno vodeni in spajljivi težkotonážni priklopniki (tla: 250x130 cm) z nosilnostjo 6.000 kg, na voljo 9 kosov = Dodatne informacije = Dodpfxoxztads Ac Noch Splošne informacije Letnik izdelave: september 2016 Modelno leto: 2016 Konfiguracija osi Prednja os: vodena Zadnja os: vodena Teže Lastna teža: 525 kg Največja dovoljena masa: 6.525 kg Funkcionalno Znamka nadgradnje: MAFI 1060/6t Stanje Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Dodatne informacije Za več informacij se obrnite na Arne Honingh.

Stanje: dober (rabljeno), Maszyny z zakładu przetwórstwa miodu. Gorące komory DC Norris, zbiorniki do sedymentacji DC Norris, zbiorniki przechowalnicze DC Norris, zbiorniki do skrystalizowanego miodu, zbiorniki na super seed, pompy, zestawy filtracyjne, różne linie rozlewnicze do napełniania butelek typu squeezy, słoików szklanych oraz wiader plastikowych. Dcjdpfx Acopcibms Njh

Stanje: rabljeno, Leto izdelave: 2015, Wall line, izdelana za proizvodnjo sten za modularno proizvodnjo. Uporabljena pri švedskem proizvajalcu med letoma 2015 in 2021. OPOMBA: Prodaja se v obstoječem stanju. Dsdpfx Acexv Arxe Njch Dolžina postaje: 7000 mm Širina postaje: 2700 mm Postaja št. 1: Okvirna postaja CAD/CAM (vključuje dve pribijalni orodji) Postaja št. 2: Delovna miza Postaja št. 3: Polavtomatski pribijalni most (vključuje dve pribijalni orodji) Postaja št. 4: Delovna miza - dvižna miza Postaja št. 5: Multifunkcijski portal CAD/CAM (vključuje štiri vijačna orodja in rezkalno enoto) Postaja št. 6: Delovna postaja - sprejemna miza - premakljiva bočno Postaja št. 7: Delovna postaja - prenos pod kotom Postaja št. 8: Delovna postaja - dvižna miza Postaja št. 9: Delovna postaja - prenos pod kotom Postaja št. 10: Delovna postaja - dvižna miza

Stanje: rabljeno, Leto izdelave: 2010, Die Lösung wurde für die Produktion von vorgefertigten Außenwandpaneelen für Haushersteller entwickelt. Das System besteht aus drei Hauptkomponenten: einer schienengeführten Nagelbrücke und zwei Arbeitstischen. Nagelbrücke: Die Nagelbrücke ist für das automatisierte Nageln von Paneelen mit vier Nagelpistolen konzipiert, die jeweils mit der gegenüberliegenden Seite verbunden sind. Das System umfasst vier Nagelaggregate, die das Nageln gemäß vordefinierten Nagelbildern an den jeweiligen Arbeitstischen automatisch durchführen. Dodpoykqxdefx Ac Noch Das Nagelportal ist auf einem am Betonboden befestigten Schienensystem installiert, das es erlaubt, das Brückensystem bedarfsgerecht zwischen beiden Arbeitstischen zu bewegen. Das System ist mit Lichtschranken für Positionierungs- und Sicherheitskontrolle ausgestattet. Funktion: • Der schienengeführte Rahmen wird in einer neutralen Ladeposition zwischen den beiden Arbeitstischen positioniert. • Der Nagelvorgang wird von einem der beiden Arbeitstische aus gestartet. • Das gewählte Nagelbild wird automatisch ausgeführt. • Das Nagelportal wird aktiviert und führt den Nagelvorgang entsprechend dem gewählten Muster aus. Arbeitstische: Die Arbeitstische sind mit Auflagennuten zur Positionierung der Holzständer ausgeführt. Diese Nuten sind über Schiebemechanismen verstellbar und ermöglichen so die Anpassung an unterschiedliche Paneeltypen und Konfigurationen. Funktion: • Die Außenkanten des Tisches werden per Handsteuerung an das Paneel herangeführt. • Die ausgewählten Latten werden manuell positioniert, um die genaue Platzierung des Paneels zu unterstützen. • Der Bediener positioniert die zu montierenden Bauteile in die entsprechenden Nuten und gegen die Latten. • Das brückengeführte Nagelsystem wird aktiviert und führt das Nageln gemäß dem gewählten Muster aus.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, obratovalne ure: 6 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 17284006, skupna širina: 1.000 mm, skupna dolžina: 2.800 mm, skupna višina: 1.580 mm, skupna masa: 125 kg, vhodna napetost: 230 V, potreba po zraku: 12 m³/h, zračni tlak: 7 letvica, moč: 0,5 kW (0,68 KM), vhodna frekvenca: 50 Hz, Oprema: dokumentacija / priročnik, Polavtomatski stroj za polnjenje tub MF10A, proizveden pri Medipac AB. Kapaciteta polnjenja je približno 24 tub/minuto. Ko je zalogovnik za napolnjene tube poln (pribl. 10 tub), stroj preide v stanje pripravljenosti (Stand by). Ko se napolnjene tube odstranijo iz zalogovnika, se stroj ponovno samodejno zažene, kar omogoča enostavno upravljanje z enim operaterjem. Stroj je opremljen za format Ø25mm tablete in tube z zunanjo premerom Ø29mm. Drugi formati na zahtevo. Dokumentacija (v angleščini) na voljo. Dsdpjxqf Rmofx Ac Nech

Stanje: novo, Leto izdelave: 2027, ZEROLABOR ROBOTIC SYSTEM for Timber Frame Construction The Randek ZEROLABOR robotic system is a production cell in which various work processes are performed fully automatically by robots. The system is flexible and can be configured to customer specifications. The robotic cell can be integrated into existing production lines or operate as a standalone unit. The system enables the nearly fully automated production of walls, floors, and roofs in timber frame construction. Automated Processes: - Panel handling: Panels are removed from different stacks using vacuum lifters and placed onto the timber frame construction according to the CAD file. The system is flexible and can handle various panel sizes. - Fastening of panels using screws, staples, and/or nails. Djdpfxsduub Us Ac Noch - Creation of recesses for electrical installations, windows, etc. - The system can process 1, 2, or 3 panel types. - Component marking with inkjet. - Gluing. - Waste handling: plasterboard waste and OSB waste are, for example, placed at defined locations or, if necessary, directly into the waste container. - Effective dust extraction. - Alignment of the component with the worktable. - Positioning of studs prior to nailing; precise placement of nails/staples into the studs.

Stanje: rabljeno, Ta ponudba je za kromatografski sistem ÄKTA ready™. Enota je popolnoma funkcionalna in pripravljena za takojšnjo dobavo. Kromatografski sistem ÄKTA ready™ je platforma za enkratno uporabo, zasnovana za tekočinsko kromatografijo pri bioprocesiranju, povečevanju proizvodnega obsega in GMP-uregulirani proizvodnji bioloških zdravil, vključno z monoklonskimi protitelesi, rekombinantnimi proteini, virusnimi vektorji, nukleinskimi kislinami ter drugimi občutljivimi terapevtskimi produkti. Ključne značilnosti: Dcodjyitvpspfx Ac Noh - Enkratni, za enkratno uporabo namenjeni pretočni sistemi – odpravljajo potrebo po čiščenju in validaciji čiščenja med posameznimi cikli, zmanjšujejo čas nedelovanja ter minimizirajo tveganje navzkrižne kontaminacije. - Prilagodljivo delovanje – na voljo v več izvedbah (izokratna, gradientna, z variabilnim UV, razširjena) za različne potrebe čiščenja. - Skalabilna platforma – pretočni seti za nizke in visoke pretoke omogočajo podporo za širok spekter proizvodnih volumnov; sistemi se lahko nadgradijo od manjših do velikih procesnih zahtev, še posebej v kombinaciji z večjimi modeli ÄKTA ready™ XL. - Zasnovano za GMP okolja – obsežna dokumentacija in regulativna podpora pomagata izpolniti zahteve skladnosti v regulirani biofarmacevtski proizvodnji.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, The Randek JS400C end-trimming saw is designed to create cut-outs at the ends of timber pieces, for example, to accommodate a tie beam in vertically oriented studs. The machine pneumatically clamps the timber and performs two cuts with its two 400 mm diameter saw blades. The maximum cutting length is 380 mm, and the cutting depth can be set up to a maximum of 115 mm. Operation is quick and easy via foot pedal. Function description The timber section to be notched, e.g. a stud, is pushed into the covered saw slot up to the set stop. Any protruding end is supported on a roller stand (not included). Pneumatic clamping and the sawing cycle are activated via foot pedal. Djdpfxod Arwhe Ac Noch Technical description • Notch depth: 30–115 mm • Notch length: 10–380 mm • Timber thickness: 30–70 mm • Electrical connection: 3 x 400 V, 50 Hz, 25 A • Compressed air: 0.5–0.8 MPa (5–8 bar) • Saw blades: Carbide-tipped, 400/30-3.5/2.5/40 Safety The saw is well guarded by a cover plate to prevent accidental contact. When the cover is opened, power is automatically cut off, significantly reducing the risk of injury. Advantages • Enables effective and precise notching/cutting • Flexible and easy to set up • Simple to operate • Adjustable working height and foot pedal operation ensure ergonomic working conditions for the operator

Stanje: novo, Leto izdelave: 2026, Tilting Table Combination for Timber Frame Construction – BS20 The Randek Tilting Table Combination is an efficient tool for the production of prefabricated walls, roofs, floors, and gable structures with timber or metal frames. The tables can be operated as standalone units or integrated into production lines. Perfectly square building components of high quality are ensured by the clamping function. The lifting and tilting of the components are performed through a controlled, manually operated process. This tilting table combination is designed specifically for the manufacture of prefabricated houses, enabling high productivity. The adjustable assembly height for building elements ranges from 2.25 m to 3.10 m. The following table lengths are available: 6.0 m / 7.5 m / 9.0 m / 12.0 m. Wall thickness can vary between 80 and 250 mm. Functions: The tilting table combination was developed to efficiently perform the following processes: frame assembly, insertion of insulation material, stapling of plastic or paper films, and application and nailing of wall cladding. • Production of square building components. The pneumatic clamping mechanism along the long side of the master table presses the frame assembly into a square, high-quality, precise building component • Automatic tilting of the building component, manually controlled • Automatic raising of the building component Technical Description: • Lengths available: 6.0 m / 7.5 m / 9.0 m / 12.0 m • Adjustable width between 2250 – 3100 mm; width is set manually and easily • The master table can be hydraulically raised up to 92°, the slave table up to 86° • Pneumatically activated pressing function on the long side of the master table Dcedpfx Aco Nn Hyj Neh • Stops 160 mm high • Both tables are, as far as technically feasible, covered with plywood. The plywood sheathing allows sub-components and beams to be placed directly on the table • Tabletops supported by a robust steel frame • Optimal working height of 620 mm • Longitudinal C-profiles for positioning stops for studs • Tables are delivered ready for assembly. Installation is straightforward Safety: • Emergency stop switch on control panel • CE conformity Advantages: • Perfectly square building elements through the pressing function • Controlled automatic raising and tilting of the components • Ideal working height • Flexible width adjustment

Stanje: novo, Randek SPL728 Cut-Off Saw Computer-controlled, rotating, with LAN (Ethernet) connection for downloading or storing saw jobs (text file in ASCII format). The number of programs that can be stored is limited only by the size of the hard drive. Thanks to the graphical touchscreen (HMI), the operator can monitor all details directly on the screen or enter saw jobs manually. This minimizes disruptions in production flow. Saw blade: - Carbide-tipped, low-noise - 700 mm diameter / 116 teeth - 360° horizontal swivel - 90° to 28° tilting - 250 mm plunge depth Motor power: 7.5 kW. Automatically closing and locking safety guard made of plastic. Infeed table, available in lengths of 4.0 / 5.8 / 8.2 / 10.6 m Powered infeed roller, type IRO4-120. Transport rollers: 76 mm diameter, 400 mm roller length, 500 mm center-to-center spacing. Rear fence: 120 mm. 2 pneumatic hold-down devices. Feed direction: optional from left or right. Dcedpfx Asfg Tatsc Nsh Outfeed table, available in lengths of 5.8 / 7.0 / 8.2 / 9.4 / 10.6 / 11.8 / 13 m Computer-controlled roller conveyor type LX. Guide roller for outfeed: rollers 76 mm diameter, 400 mm long. Rear stop 120 mm. 2 computer-controlled longitudinal stops, belt-driven. Stop 1 - designed for cut lengths down to 50 mm. Stop 2 - traverses the full length of the outfeed table. Positioning of longitudinal stops and adjustment of cutting angles are computer-controlled independently. Maximum travel speed of longitudinal stops: 1 m/s. Wood infeed: 1 unit Return devices: 2 units Feed direction: configurable from left or right.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Delovna miza s stiskalno napravo in napravo za postavljanje Dsdox Tdtnspfx Ac Njch