Donaldson Buran Dc 0225 Ab nakup rabljenega (14.685)

Stanje: dober (rabljeno), Enkelschroef Schroefdiameter 25 mm Afmetingen (LxBxH) 1860 x 900 x 1850 mm Opties • Inclusief afhaaltrek • Inclusief koeltrog Gsdjvri Ddopfx Afwsit

Stanje: zelo dobro (rabljeno), Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, generator air filter Gijdpopyk Itjfx Afwst -Manufacturer: Donaldson, air filter type SMP 18 1045 Ovp -Quantity: 8 air filters available -Price: per piece -Packaging dimensions: 265/265/H280 mm -Weight: 1.8 kg/each

Stanje: dober (rabljeno), Hydraulic pump, oil pump, gear pump Giodeb A Sizspfx Afwjt -Shaft mounting: -Dimensions: 180/160/120 mm -Weight: 4.5 kg

Stanje: dober (rabljeno), Hydraulic pump, oil pump, gear pump - Shaft mounting: - Price: per unit - Quantity: 2 available Godpfxeb A Siye Afweit - Dimensions: 170/120/110 mm - Weight: 4.3 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 21.676 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 750 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 25.000 kg, transportna višina: 3.000 mm, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), lastna masa: 25.000 kg, volumenski pretok: 930 m³/h, obratovalni tlak: 250 letvica, Good day, We are pleased to offer you, on a non-binding basis, a used baler manufactured by Presona AB, model LP 80 VH1. Godsvgrh Ujpfx Afwoit The following technical data has been taken from the manufacturer's operating manual and brochures. We do not assume any liability for their accuracy or completeness. Manufacturer: Presona AB, Sweden Model: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours (as of November 2024) Press force (main press): 78 t Specific press force: 95 N/cm² Pre-compression flap force: 28 t Feed opening dimensions: 1,500 x 1,100 mm Fill volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 1,000 L Baler dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight (baler) approx. 25 t Note: The machine was used in a recycling operation for compacting paper, cardboard, and films. The baler is in good condition, will remain in operation until January 2025, and can be inspected by prior arrangement. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 37.656 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 85 t, širina odprtine za polnjenje: 1.500 mm, dolžina polnilne odprtine: 1.100 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 650 kg, skupna masa: 25.000 kg, kapaciteta rezervoarja za olje: 1.000 l, leto zadnje generalne obnove: 2024, volumenski pretok: 410 m³/h, transportna širina: 2.400 mm, transportna dolžina: 9.300 mm, Good day, We hereby offer you, without obligation, a used baler from the manufacturer Presona AB, type LP 85 VH1. The following technical data have been taken from the manufacturer's operating manual and brochures, for which we cannot assume any liability for the accuracy and completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours (as of March 25) Main press force: 85 t Specific press force: 100 N/cm² Pre-press door force: 28 t Feed opening dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Godpfx Asv T I Evefwsit Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Machine weight press: approx. 25 t Note: This machine was used in a recycling facility for compacting paper, cardboard, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have already been replaced in the last 3 years. The machine has been serviced regularly. We would be pleased if this press is of interest to you. Your Service Team, Mertens & Frowein GmbH

Stanje: rabljeno, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2018, dolžina tovornega prostora: 13.640 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.680 mm, Leto izdelave: 2018, Oprema: ABS, * NETO CENA * Schmitz Rotos osi z disk zavorami * Dvižna os Gijdjx Dybgopfx Afwet * SPEED CURTAIN ponjava levo * Paletni omejevalnik R&L * Dvižna ploščad BÄR 3t * RSAB Ice Protect * Nosilec rezervnega kolesa * Edscha streha * Orodjarna * D x Š x V: 13,64 x 2,48 x 2,68 * Pnevmatike: 385/65 R22,5 * Nemško vozilo * Odlično stanje WhatsApp: Pridržujemo si pravico do napak in vmesne prodaje! Prodaja izključuje kakršno koli garancijo!

Stanje: rabljeno, prevoženi kilometri: 150 km, moč: 96 kW (130,52 KM), prva registracija: 01/2025, vrsta goriva: dizel, gorivo: dizel, barva: bela, emisijski razred: Euro 6, Leto izdelave: 2024, Oprema: ABS, UVV varnostni pregled, airbag, centralno zaklepanje, drsna vrata, elektronski program stabilnosti (ESP), garancija za rabljena vozila, klimatska naprava, meglenke, nadzor oprijema, računalnik na krovu, registracija tovornjaka, sistem za imobilizacijo, tempomat, Thermo King V300-20 HFC 12/230V stationary and in-transit refrigeration, on-board computer, leather gearshift/selector lever, height and reach-adjustable steering column (steering wheel), diesel particulate filter, cruise control, air conditioning, central locking with remote control, sliding door for load/passenger compartment on the right, low-emission according to Euro 6d-TEMP emissions standard, automatic transmission SelectShift (6-speed), rearview camera, audio system: radio with USB and Bluetooth hands-free system, Audio System 13: DAB/DAB+ digital radio reception with 4 multi-function display, heated windscreen, tire repair kit, rain sensor wipers, metal bulkhead with window in the cargo area, interior mirror with automatic dimming, second key with foldable remote, anti-lock braking system (ABS), electrically adjustable and heated exterior mirrors, fog lights, front and rear parking assist, electric window lifters, passenger airbag, steel wheels 6.5x16, cornering lights in headlights, roof storage compartment in the cab, increased front axle load to 1.85 t, trailer stability program (TSA), drive type: front-wheel drive, hill start assist, indicator integrated in exterior mirror, flooring: vinyl in cargo/passenger compartment, docking station (MyFord Dock), entry lights, electronic brakeforce distribution (EBD), electronic stability program, electronic traction control, FordPass Connect including eCall, rear wing doors with glazing (opening angle 180 degrees), heated rear window, recirculation mode heating, body/variant: high roof van, automatic climate control, radiator grille with chrome trim, LED cargo area light, load compartment protection package, leather steering wheel, medium-high roof, engine 2.0 L - 96 kW TDCi CAT, MyKey programmable spare key, emergency brake assist, digital radio reception (DAB+), steering wheel radio remote control, wheelbase 3750 mm, headlight assistant with day/night sensor, rear mud flaps, crosswind assist, Seat Package 18A: driver seat (4-way adjustable, etc...). Modifications, prior sale, and errors reserved. Giodpexai Nfofx Afwjt

Stanje: rabljeno, prevoženi kilometri: 15.900 km, moč: 81 kW (110,13 KM), prva registracija: 10/2020, vrsta goriva: bencin, skupna masa: 1.940 kg, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 2, Leto izdelave: 2020, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, Special equipment: - Driver/front passenger airbag - Driver airbag Gedpfxevra Tve Afwjit - Cool & Sound Package 1 - Multimedia audio system, Bluetooth hands-free system - Air conditioning - Cruise control - Front seat heating - Driver’s seat adjustment (6-way), front passenger seat adjustment (4-way) - Audio controls on the steering wheel - Electric front windows with anti-trap protection - Electrically adjustable, heated, and power-folding exterior mirrors - Rear park assist system Other features: - Driver airbag - Omission of sliding door on right-hand side (passenger/cargo area) - Hill Start Assist (HSA) - Rear wing doors without glazing - Body/construction: panel van - Full steel bulkhead - Engine 1.2 litre – 81 kW - Gasoline particulate filter (GPF) - Wheel hub covers - Wheelbase 2785 mm - Low-emission according to Euro 6d emissions standard - Start/stop system

Stanje: rabljeno, prevoženi kilometri: 10.600 km, moč: 75 kW (101,97 KM), prva registracija: 07/2020, vrsta goriva: dizel, skupna masa: 2.830 kg, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 3, Leto izdelave: 2020, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, Special equipment: - Towbar (removable ball head) - Comfort Package - Head airbag system - Front and rear parking sensors - Blind Spot Warning Comfort Package: - Multimedia audio system, Bluetooth hands-free, USB interface, smartphone integration (Apple CarPlay & Android Auto), rear parking sensors, leather steering wheel, audio controls on the steering wheel - Front and rear parking sensors - Exterior mirrors electrically adjustable and heated, electrically folding - Fog lights - Driver assistance system: Blind Spot Assist Gjdpfx Afovwiqhewoit Towbar (removable ball head) Head airbag system Front side airbags Additional equipment: - Driver and front passenger airbags - Floor covering: luggage/load area in rubber - On-board computer - Brake assist - Double front passenger bench with storage compartment - Driver assistance system: Hill Start Assist (HSA) - Rear wing doors without glazing - Body/construction: panel van - Vehicle length variant: L1 - Partition wall separating the load compartment (closed) - Height-adjustable steering column (steering wheel) - Headlight range adjustment - Engine 1.5 Ltr. - 75 kW CDTI DPF - Rear parking sensors - Wheelbase 2925 mm - Tyre repair kit - Emission standard Euro 6d-TEMP (low emission) - Right sliding door - SCR system (AdBlue technology) - Visibility package - Steel rims 7x17 - Start/stop system - 12V power socket in boot/load compartment - 12V power socket in centre console - Outside door handles in black

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.895 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 24.000 kg, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), volumenski pretok: 930 m³/h, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of manufacture: 2012 Total machine operating hours: 25,895 hours (as of July 2025) Pump effective operating hours: 14,135 hours (as of July 2025) Total number of bales pressed: 235,597 pcs (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/h Throughput under operating conditions: 410 m³/h Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying system: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 9 to 12 t/h, depending on material - 50 kg/m³: approx. 14 to 17 t/h, depending on material - 100 kg/m³: approx. 16 to 25 t/h, depending on material Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm Godpfxsvwlqqo Afweit Machine weight (press): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation. The following refurbishment works were carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank drained completely and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers on the press ram dismantled and replaced - Wire station with deflection rollers for the lower wire cleaned and made operational - Side guides removed from press ram, smoothed, mounted, and readjusted - Main hydraulic cylinder dismantled and stripped for inspection - Piston rod replaced, cylinder tube honed - Complete set of seals replaced, pressure test performed - Hydraulic hose for main hydraulic cylinder replaced - Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced - Chain cleaned, greased, and chain tension readjusted - Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control - Door contact switches checked and partially replaced - Emergency stop switch checked - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers under the press replaced - New safety guards for vertical and horizontal binding fabricated and installed - Machine checked, general maintenance performed, and baler tested in both manual and automatic operation Scope of delivery: Only the baler itself is being offered for sale. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors.

Stanje: novo, Leto izdelave: 2025, Example system for filling liquids into bottles, capping with a screw cap, and subsequent labeling of the bottles. Complete system consisting of: feed sorting table; filling machine with 4 filling heads for high or low viscosity liquids; capping machine for different cap sizes and shapes including cap sorting feed; labeling machine for bottles/cans/containers made of glass or plastic; collection table. The individual machines of the packaging line are interconnected by conveyor belts, which gives the system high flexibility in installation. Specifications: Number of filling nozzles: 4; filling range: 100-1000ml; dosing type: piston pump; accuracy: +/- 1%; bottle height: 15-400mm; bottle diameter: 25-200mm; speed: max. 1000 bottles/hour; label size: L25-300mm, W20-180mm. All wetted parts are made of stainless steel 304. Dimensions and total weight of the system depend on the final layout. Please note: This is just an example system. Final specifications may differ. The machine photo only shows the 4-head filling machine. Gjdpfx Afov Nlbaewjit Please note that our new prices are often lower than standard used prices. Feel free to contact us and tell us about your packaging requirements. Usually, 30-50 different new machines are always immediately available from stock. For custom-built machines, we offer very short delivery times from approx. 3 weeks. All machines are available with full warranty.

Stanje: zelo dobro (rabljeno), konfiguracija osi: 2 osi, prva registracija: 09/2016, barva: rdeča, Leto izdelave: 2016, obratovalne ure: 2.400 h, 2016 MAFI težke prikolice z dvojnim krmiljenjem in možnostjo spajanja (tla: 250x130 cm) z nosilnostjo 6.000 kg, na voljo 9 kosov = Dodatne informacije = Splošne informacije Letnik modela: 2016 Tehnične informacije Vrsta goriva: Električni Prednja os: Krmiljena Zadnja os: Krmiljena Teže Lastna teža: 525 kg Nosilnost: 6.000 kg Gisdpfx Aoxzdz Sefwst Največja dovoljena masa: 6.525 kg Funkcionalno Znamka nadgradnje: MAFI 1060/6t Stanje Tehnično stanje: zelo dobro Videz: zelo dobro Dodatne informacije Za več informacij kontaktirajte Arne Honingh.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, obratovalne ure: 2.400 h, nosilnost: 6.000 kg, vrsta goriva: električni, barva: rdeča, 2016 MAFI dvakrat zglobno vodeni in spajljivi težkotonážni priklopniki (tla: 250x130 cm) z nosilnostjo 6.000 kg, na voljo 9 kosov = Dodatne informacije = Splošne informacije Letnik izdelave: september 2016 Modelno leto: 2016 Konfiguracija osi Prednja os: vodena Zadnja os: vodena Teže Lastna teža: 525 kg Največja dovoljena masa: 6.525 kg Funkcionalno Znamka nadgradnje: MAFI 1060/6t Giodpfx Afjxzd A Aswjt Stanje Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Dodatne informacije Za več informacij se obrnite na Arne Honingh.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, obratovalne ure: 2.400 h, nosilnost: 6.000 kg, vrsta goriva: električni, barva: rdeča, 2016 MAFI dvakrat zglobno vodeni in spajljivi težkotonážni priklopniki (tla: 250x130 cm) z nosilnostjo 6.000 kg, na voljo 9 kosov = Dodatne informacije = Splošne informacije Letnik izdelave: september 2016 Gjdpfx Ajxztadjfwoit Modelno leto: 2016 Konfiguracija osi Prednja os: vodena Zadnja os: vodena Teže Lastna teža: 525 kg Največja dovoljena masa: 6.525 kg Funkcionalno Znamka nadgradnje: MAFI 1060/6t Stanje Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Dodatne informacije Za več informacij se obrnite na Arne Honingh.

Stanje: rabljeno, Leto izdelave: 2015, Wall line, izdelana za proizvodnjo sten za modularno proizvodnjo. Giedexv Arxspfx Afwet Uporabljena pri švedskem proizvajalcu med letoma 2015 in 2021. OPOMBA: Prodaja se v obstoječem stanju. Dolžina postaje: 7000 mm Širina postaje: 2700 mm Postaja št. 1: Okvirna postaja CAD/CAM (vključuje dve pribijalni orodji) Postaja št. 2: Delovna miza Postaja št. 3: Polavtomatski pribijalni most (vključuje dve pribijalni orodji) Postaja št. 4: Delovna miza - dvižna miza Postaja št. 5: Multifunkcijski portal CAD/CAM (vključuje štiri vijačna orodja in rezkalno enoto) Postaja št. 6: Delovna postaja - sprejemna miza - premakljiva bočno Postaja št. 7: Delovna postaja - prenos pod kotom Postaja št. 8: Delovna postaja - dvižna miza Postaja št. 9: Delovna postaja - prenos pod kotom Postaja št. 10: Delovna postaja - dvižna miza

Stanje: rabljeno, Leto izdelave: 2010, Die Lösung wurde für die Produktion von vorgefertigten Außenwandpaneelen für Haushersteller entwickelt. Das System besteht aus drei Hauptkomponenten: einer schienengeführten Nagelbrücke und zwei Arbeitstischen. Nagelbrücke: Die Nagelbrücke ist für das automatisierte Nageln von Paneelen mit vier Nagelpistolen konzipiert, die jeweils mit der gegenüberliegenden Seite verbunden sind. Das System umfasst vier Nagelaggregate, die das Nageln gemäß vordefinierten Nagelbildern an den jeweiligen Arbeitstischen automatisch durchführen. Das Nagelportal ist auf einem am Betonboden befestigten Schienensystem installiert, das es erlaubt, das Brückensystem bedarfsgerecht zwischen beiden Arbeitstischen zu bewegen. Das System ist mit Lichtschranken für Positionierungs- und Sicherheitskontrolle ausgestattet. Funktion: • Der schienengeführte Rahmen wird in einer neutralen Ladeposition zwischen den beiden Arbeitstischen positioniert. • Der Nagelvorgang wird von einem der beiden Arbeitstische aus gestartet. • Das gewählte Nagelbild wird automatisch ausgeführt. • Das Nagelportal wird aktiviert und führt den Nagelvorgang entsprechend dem gewählten Muster aus. Arbeitstische: Gisdpfsykqxdjx Afwst Die Arbeitstische sind mit Auflagennuten zur Positionierung der Holzständer ausgeführt. Diese Nuten sind über Schiebemechanismen verstellbar und ermöglichen so die Anpassung an unterschiedliche Paneeltypen und Konfigurationen. Funktion: • Die Außenkanten des Tisches werden per Handsteuerung an das Paneel herangeführt. • Die ausgewählten Latten werden manuell positioniert, um die genaue Platzierung des Paneels zu unterstützen. • Der Bediener positioniert die zu montierenden Bauteile in die entsprechenden Nuten und gegen die Latten. • Das brückengeführte Nagelsystem wird aktiviert und führt das Nageln gemäß dem gewählten Muster aus.

Stanje: rabljeno, prevoženi kilometri: 405.524 km, moč: 309 kW (420,12 KM), prva registracija: 07/2004, vrsta goriva: dizel, skupna masa: 26.000 kg, vrsta prenosa: mehanski, emisijski razred: Euro 3, Oprema: ABS, Kerax 420 dci 16-stopenjski ročni menjalnik RETARDER Gjdpfx Afsx E Idhjwjit Hiab 088B-2 Duo dvigalo 2x hidravlično iztegljivo Funkcija 5+6 za vrtljivo glavo in grabilo Abrolkipper Multilift z lomljivim krakom 20 ton Listnato vzmetenje spredaj in zadaj Motor in menjalnik delujeta dobro !! POZOR: ZAŽENE SE SAMO S START PILOTOM !! Belgijska registracija Cena 21.750,- € neto

Stanje: rabljeno, Donaldson Torit DCE prezračevalni filter, vložni filter Tip: DLMV8/7S Vključuje 12 filtrovnih okvirjev po 1 meter Gisdpfxsxc Iyuj Afwet Oglejte si tudi naše druge oglase VMA Wekerom

Stanje: novo, Leto izdelave: 1987, PowerCore ločevalnik prahu Donaldson Torit CPV Tip: CPV6 Neuporabljen Giodpfx Afoxc Eyxjwot Z novimi filternimi vložki Oglejte si tudi naše druge oglase VMA Wekerom

Stanje: rabljeno, Ta ponudba je za kromatografski sistem ÄKTA ready™. Gijdpfxeyitvps Afwet Enota je popolnoma funkcionalna in pripravljena za takojšnjo dobavo. Kromatografski sistem ÄKTA ready™ je platforma za enkratno uporabo, zasnovana za tekočinsko kromatografijo pri bioprocesiranju, povečevanju proizvodnega obsega in GMP-uregulirani proizvodnji bioloških zdravil, vključno z monoklonskimi protitelesi, rekombinantnimi proteini, virusnimi vektorji, nukleinskimi kislinami ter drugimi občutljivimi terapevtskimi produkti. Ključne značilnosti: - Enkratni, za enkratno uporabo namenjeni pretočni sistemi – odpravljajo potrebo po čiščenju in validaciji čiščenja med posameznimi cikli, zmanjšujejo čas nedelovanja ter minimizirajo tveganje navzkrižne kontaminacije. - Prilagodljivo delovanje – na voljo v več izvedbah (izokratna, gradientna, z variabilnim UV, razširjena) za različne potrebe čiščenja. - Skalabilna platforma – pretočni seti za nizke in visoke pretoke omogočajo podporo za širok spekter proizvodnih volumnov; sistemi se lahko nadgradijo od manjših do velikih procesnih zahtev, še posebej v kombinaciji z večjimi modeli ÄKTA ready™ XL. - Zasnovano za GMP okolja – obsežna dokumentacija in regulativna podpora pomagata izpolniti zahteve skladnosti v regulirani biofarmacevtski proizvodnji.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1981, številka stroja/vozila: S 659, Funkcionalnost: popolnoma funkcionalen, popolnoma funkcionalen in v dobrem stanju Gsdsyr E Shepfx Afwsit

Stanje: novo, Leto izdelave: 2027, ZEROLABOR ROBOTIC SYSTEM for Timber Frame Construction The Randek ZEROLABOR robotic system is a production cell in which various work processes are performed fully automatically by robots. The system is flexible and can be configured to customer specifications. The robotic cell can be integrated into existing production lines or operate as a standalone unit. The system enables the nearly fully automated production of walls, floors, and roofs in timber frame construction. Automated Processes: - Panel handling: Panels are removed from different stacks using vacuum lifters and placed onto the timber frame construction according to the CAD file. The system is flexible and can handle various panel sizes. - Fastening of panels using screws, staples, and/or nails. - Creation of recesses for electrical installations, windows, etc. - The system can process 1, 2, or 3 panel types. - Component marking with inkjet. - Gluing. Godpfx Ajduub Ujfwjit - Waste handling: plasterboard waste and OSB waste are, for example, placed at defined locations or, if necessary, directly into the waste container. - Effective dust extraction. - Alignment of the component with the worktable. - Positioning of studs prior to nailing; precise placement of nails/staples into the studs.

Stanje: dober (rabljeno), Maszyny z zakładu przetwórstwa miodu. Gorące komory DC Norris, zbiorniki do sedymentacji DC Norris, zbiorniki przechowalnicze DC Norris, zbiorniki do skrystalizowanego miodu, zbiorniki na super seed, pompy, zestawy filtracyjne, różne linie rozlewnicze do napełniania butelek typu squeezy, słoików szklanych oraz wiader plastikowych. Gsdpfxspcibms Afwjit

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, The Randek JS400C end-trimming saw is designed to create cut-outs at the ends of timber pieces, for example, to accommodate a tie beam in vertically oriented studs. The machine pneumatically clamps the timber and performs two cuts with its two 400 mm diameter saw blades. The maximum cutting length is 380 mm, and the cutting depth can be set up to a maximum of 115 mm. Operation is quick and easy via foot pedal. Function description The timber section to be notched, e.g. a stud, is pushed into the covered saw slot up to the set stop. Any protruding end is supported on a roller stand (not included). Pneumatic clamping and the sawing cycle are activated via foot pedal. Technical description • Notch depth: 30–115 mm • Notch length: 10–380 mm • Timber thickness: 30–70 mm • Electrical connection: 3 x 400 V, 50 Hz, 25 A Gijdpfx Aed Arwhefwet • Compressed air: 0.5–0.8 MPa (5–8 bar) • Saw blades: Carbide-tipped, 400/30-3.5/2.5/40 Safety The saw is well guarded by a cover plate to prevent accidental contact. When the cover is opened, power is automatically cut off, significantly reducing the risk of injury. Advantages • Enables effective and precise notching/cutting • Flexible and easy to set up • Simple to operate • Adjustable working height and foot pedal operation ensure ergonomic working conditions for the operator